Update text files for 4.4.1

Closes #2993

.github/renovate.json

@@ -7,6 +7,7 @@
   "schedule": [
     "before 8am on Monday"
   ],
+  "baseBranches": ["develop", "feature/uvicorn"],
   "pip_requirements": {
     "fileMatch": [
       "requirements.txt",
@@ -22,8 +23,7 @@
     "jaraco.collections",
     "sabctools",
     "paho-mqtt",
-    "werkzeug",
-    "pyinstaller"
+    "werkzeug"
   ],
   "packageRules": [
     {

.github/workflows/build_release.yml

@@ -13,10 +13,10 @@ jobs:
     timeout-minutes: 30
     steps:
     - uses: actions/checkout@v4
-    - name: Set up Python 3.12 (64bit)
+    - name: Set up Python 3.13 (64bit)
       uses: actions/setup-python@v5
       with:
-        python-version: "3.12"
+        python-version: "3.13"
         architecture: "x64"
         cache: pip
         cache-dependency-path: "**/requirements.txt"
@@ -69,18 +69,18 @@ jobs:
       # We need the official Python, because the GA ones only support newer macOS versions
       # The deployment target is picked up by the Python build tools automatically
       # If updated, make sure to also set LSMinimumSystemVersion in SABnzbd.spec
-      PYTHON_VERSION: "3.12.6"
+      PYTHON_VERSION: "3.13.1"
       MACOSX_DEPLOYMENT_TARGET: "10.13"
       # We need to force compile for universal2 support
       CFLAGS: -arch x86_64 -arch arm64
       ARCHFLAGS: -arch x86_64 -arch arm64
     steps:
     - uses: actions/checkout@v4
-    - name: Set up Python 3.12
+    - name: Set up Python 3.13
       # Only use this for the caching of pip packages!
       uses: actions/setup-python@v5
       with:
-        python-version: "3.12"
+        python-version: "3.13"
         cache: pip
         cache-dependency-path: "**/requirements.txt"
     - name: Cache Python download
@@ -136,13 +136,12 @@ jobs:
       uses: actions/upload-artifact@v4
       with:
         path: "*-osx.dmg"
-        name: macOS binary (not notarized)
+        name: macOS binary
 
   release:
-    name: Publish Release
+    name: Prepare Release
     runs-on: ubuntu-latest
     needs: [build_windows, build_macos]
-    if: github.event_name == 'push' && contains(github.ref, 'refs/tags/')
     steps:
       - uses: actions/checkout@v4
       - name: Set up Python
@@ -163,6 +162,7 @@ jobs:
           pip3 install -r builder/release-requirements.txt
           python3 builder/release.py
       - name: Release latest available Snap
+        if: github.event_name == 'push' && contains(github.ref, 'refs/tags/')
         env:
           SNAPCRAFT_STORE_CREDENTIALS: ${{ secrets.SNAP_TOKEN }}
         run: |

README.mkd

@@ -1,17 +1,28 @@
-Release Notes - SABnzbd 4.4.0 Alpha 2
+Release Notes - SABnzbd 4.4.1
 =========================================================
 
-This is the first test release of SABnzbd 4.4.0.
+## Bugfixes and changes since 4.4.0
+* Added `Certificate verification` level `Medium` to allow
+  certificates injected by firewall or virus scanner.
+* Windows: Windows notifications did not work.
 
-## New features since 4.3.0
+## New features in 4.4.0
 
 * Subtitle files will be deobfuscated if required.
+* Show server `Personal notes` on the main servers display.
+* Windows: Use par2cmdline-turbo by default (thanks to @dnzbk).
 * macOS: Dropped support for macOS 10.12 and below.
+* macOS and Windows: Use Python 3.13 for release.
+* Windows: The next release will no longer support Windows 32bit or Windows 7.
 
-## Bug fixes since 4.3.0
+## Bug fixes in 4.4.0
 
 * Toggling of Servers could result in jobs being stuck at 99%.
+* Corrupt NZB's could also result in jobs being stuck at 99%.
 * Config restart would always determine redirect URL instead of using current.
+* Correctly handle `disk full` errors from Unrar.
+* Create new history database in case of `no such table` error.
+* Interface could load in tabbed mode even though it was not enabled.
 
 ## Upgrade notices
 

SABnzbd.py

@@ -1496,6 +1496,10 @@ def main():
                 ssdp_broadcast_interval=sabnzbd.cfg.ssdp_broadcast_interval(),
             )
 
+    # TODO: Remove in 4.5
+    if hasattr(sys, "frozen") and sabnzbd.WIN32 and not sabnzbd.WIN64:
+        logging.warning("SABnzbd 4.5.0 will not have a legacy release, because Python no longer support it!")
+
     # Have to keep this running, otherwise logging will terminate
     timer = 0
     while not sabnzbd.SABSTOP:

builder/SABnzbd.spec

@@ -13,7 +13,7 @@ from builder.constants import EXTRA_FILES, EXTRA_FOLDERS, RELEASE_VERSION, RELEA
 extra_pyinstaller_files = []
 
 # Add hidden imports
-extra_hiddenimports = ["Cheetah.DummyTransaction", "cheroot.ssl.builtin", "certifi", "pkg_resources.extern"]
+extra_hiddenimports = ["Cheetah.DummyTransaction", "cheroot.ssl.builtin", "certifi"]
 extra_hiddenimports.extend(collect_submodules("apprise"))
 extra_hiddenimports.extend(collect_submodules("babelfish.converters"))
 extra_hiddenimports.extend(collect_submodules("guessit.data"))
@@ -88,6 +88,7 @@ for folder_item in EXTRA_FOLDERS:
 extra_pyinstaller_files.extend(collect_data_files("babelfish"))
 extra_pyinstaller_files.extend(collect_data_files("guessit"))
 extra_pyinstaller_files.extend(collect_data_files("apprise"))
+extra_pyinstaller_files.extend(collect_data_files("dateutil"))
 
 pyi_analysis = Analysis(
     ["SABnzbd.py"],

builder/constants.py

@@ -37,6 +37,7 @@ PRERELEASE = len(RELEASE_VERSION) > 5
 # Parse the version info for Windows file properties information
 version_regexed = re.search(r"(\d+)\.(\d+)\.(\d+)([a-zA-Z]*)(\d*)", RELEASE_VERSION)
 RELEASE_VERSION_TUPLE = (int(version_regexed.group(1)), int(version_regexed.group(2)), int(version_regexed.group(3)), 0)
+RELEASE_VERSION_BASE = f"{RELEASE_VERSION_TUPLE[0]}.{RELEASE_VERSION_TUPLE[1]}.{RELEASE_VERSION_TUPLE[2]}"
 
 # Define release name
 RELEASE_NAME = "SABnzbd-%s" % RELEASE_VERSION

builder/package.py

@@ -356,8 +356,8 @@ if __name__ == "__main__":
                 if authority not in sign_result or "adhoc" in sign_result or "invalid" in sign_result:
                     raise RuntimeError("Signature of %s seems invalid!" % file_to_check)
 
-            # Only notarize for real builds that we want to deploy
-            if notarization_user and notarization_pass and RELEASE_THIS:
+            # Always notarize, as newer macOS versions don't allow any code without it
+            if notarization_user and notarization_pass:
                 # Prepare zip to upload to notarization service
                 print("Creating zip to send to Apple notarization service")
                 # We need to use ditto, otherwise the signature gets lost!
@@ -391,8 +391,6 @@ if __name__ == "__main__":
                 # Staple the notarization!
                 print("Approved! Stapling the result to the app")
                 run_external_command(["xcrun", "stapler", "staple", "dist/SABnzbd.app"])
-            elif notarization_user and notarization_pass:
-                print("Notarization skipped, tag commit to trigger notarization!")
             else:
                 print("Notarization skipped, NOTARIZATION_USER or NOTARIZATION_PASS missing.")
         else:

builder/release-requirements.txt

@@ -1,2 +1,2 @@
-PyGithub==2.4.0
-praw==7.7.1
+PyGithub==2.5.0
+praw==7.8.1

builder/release.py

@@ -26,6 +26,7 @@ import praw
 
 from constants import (
     RELEASE_VERSION,
+    RELEASE_VERSION_BASE,
     PRERELEASE,
     RELEASE_SRC,
     RELEASE_BINARY_32,
@@ -36,6 +37,7 @@ from constants import (
     RELEASE_THIS,
     RELEASE_TITLE,
     APPDATA_FILE,
+    ON_GITHUB_ACTIONS,
 )
 
 # Verify we have all assets
@@ -53,9 +55,14 @@ for file_to_check in files_to_check:
 print("All release files are present")
 
 # Verify that appdata file is updated
-if not PRERELEASE:
-    if not isinstance(ET.parse(APPDATA_FILE).find(f"./releases/release[@version='{RELEASE_VERSION}']"), ET.Element):
-        raise RuntimeError(f"Could not find {RELEASE_VERSION} in {APPDATA_FILE}")
+if not isinstance(ET.parse(APPDATA_FILE).find(f"./releases/release[@version='{RELEASE_VERSION_BASE}']"), ET.Element):
+    release_missing = f"Could not find {RELEASE_VERSION_BASE} in {APPDATA_FILE}"
+    if RELEASE_THIS:
+        raise RuntimeError(release_missing)
+    elif ON_GITHUB_ACTIONS:
+        print(f"::warning file={APPDATA_FILE},title=Missing release::{release_missing}")
+    else:
+        print(release_missing)
 
 # Calculate hashes for Synology release
 with open(RELEASE_SRC, "rb") as inp_file:

builder/requirements.txt

@@ -1,19 +1,20 @@
 # Basic build requirements
 # Note that not all sub-dependencies are listed, but only ones we know could cause trouble
-pyinstaller==5.13.2
-packaging==24.1
-pyinstaller-hooks-contrib==2024.8
+pyinstaller==6.11.1
+packaging==24.2
+pyinstaller-hooks-contrib==2024.10
 altgraph==0.17.4
-wrapt==1.16.0
-setuptools==75.1.0
+wrapt==1.17.0
+setuptools # List version-less for Python 3.8 to just get latest supported
+setuptools==75.6.0; python_version > '3.8'
 
 # Required on 32bit Windows, exclude it based on Python-version
 importlib_metadata==8.5.0; python_version < '3.10'
 importlib_resources==6.4.5; python_version < '3.10'
-zipp==3.20.2; python_version < '3.10'
+zipp; python_version < '3.10' # List version-less for Python 3.8 to just get latest supported
 
 # orjson does not support 32bit Windows, also exclude based on Python-version
-orjson==3.10.7; python_version > '3.8'
+orjson==3.10.12; python_version > '3.8'
 
 # For the Windows build
 pefile==2024.8.26; sys_platform == 'win32'

interfaces/Config/templates/config_server.tmpl

@@ -94,11 +94,12 @@
                     <div class="field-pair advanced-settings">
                         <label class="config" for="ssl_verify">$T('opt-ssl_verify')</label>
                         <select name="ssl_verify" id="ssl_verify">
-                            <option value="2" selected>$T('ssl_verify-strict')</option>
-                            <option value="1">$T('ssl_verify-normal')</option>
+                            <option value="3" selected>$T('ssl_verify-strict')</option>
+                            <option value="2">$T('ssl_verify-medium')</option>
+                            <option value="1">$T('ssl_verify-minimal')</option>
                             <option value="0">$T('ssl_verify-disabled')</option>
                         </select>
-                        <span class="desc">$T('explain-ssl_verify').replace('. ', '.<br/>')</span>
+                        <span class="desc">$T('explain-ssl_verify').replace('-', '<br/>-')</span>
                     </div>
                     <div class="field-pair advanced-settings">
                         <label class="config" for="ssl_ciphers">$T('opt-ssl_ciphers')</label>
@@ -171,6 +172,9 @@
                     </table>
                     <button type="button" class="btn btn-default showserver"><span class="glyphicon glyphicon-pencil"></span> $T('showDetails')</button>
                     <button type="button" class="btn btn-default clrServer"><span class="glyphicon glyphicon-remove"></span> $T('button-clrServer')</button>
+                    <!--#if $server['notes'] #-->
+                    <p>$server['notes'].replace('\n', '<br>')</p>
+                    <!--#end if#-->
                 </div>
                 <div class="col1" style="display:none;">
                     <input type="hidden" name="enable" id="enable$cur" value="$int($server['enable'])" />
@@ -221,11 +225,12 @@
                         <div class="field-pair advanced-settings">
                             <label class="config" for="ssl_verify$cur">$T('opt-ssl_verify')</label>
                             <select name="ssl_verify" id="ssl_verify$cur">
-                                <option value="2" <!--#if $server['ssl_verify'] == 2 then 'selected="selected"' else ""#--> >$T('ssl_verify-strict')</option>
-                                <option value="1" <!--#if $server['ssl_verify'] == 1 then 'selected="selected"' else ""#--> >$T('ssl_verify-normal')</option>
+                                <option value="3" <!--#if $server['ssl_verify'] == 3 then 'selected="selected"' else ""#--> >$T('ssl_verify-strict')</option>
+                                <option value="2" <!--#if $server['ssl_verify'] == 2 then 'selected="selected"' else ""#--> >$T('ssl_verify-medium')</option>
+                                <option value="1" <!--#if $server['ssl_verify'] == 1 then 'selected="selected"' else ""#--> >$T('ssl_verify-minimal')</option>
                                 <option value="0" <!--#if $server['ssl_verify'] == 0 then 'selected="selected"' else ""#--> >$T('ssl_verify-disabled')</option>
                             </select>
-                            <span class="desc">$T('explain-ssl_verify').replace('. ', '.<br/>')</span>
+                            <span class="desc">$T('explain-ssl_verify').replace('-', '<br/>-')</span>
                         </div>
                         <div class="field-pair advanced-settings">
                             <label class="config" for="ssl_ciphers$cur">$T('opt-ssl_ciphers')</label>
@@ -459,8 +464,8 @@
         When finished loading
     **/
     jQuery(document).ready(function(){
-        // Exception when change of priority, reload
-        jQuery('input[name="priority"], input[name="displayname"]').on('change', function() {
+        // Reload form in case we change items that make the servers appear different
+        jQuery('input[name="priority"], input[name="displayname"], textarea[name="notes"]').on('change', function() {
             jQuery('.fullform').submit(function() {
                 // No ajax this time
                 jQuery('input[name="ajax"]').val('')

interfaces/Config/templates/staticcfg/css/style.css

@@ -165,6 +165,9 @@ input[type="checkbox"]+.desc {
     color: #666;
     margin: 1em 0;
 }
+.col2 p {
+    margin-left: 3px;
+}
 .field-pair {
     padding: 6px;
     clear: both;

interfaces/Glitter/templates/static/javascripts/glitter.main.js

@@ -13,7 +13,7 @@ function ViewModel() {
     self.useGlobalOptions = ko.observable(true).extend({ persist: 'useGlobalOptions' });
     self.refreshRate = ko.observable(1).extend({ persist: 'pageRefreshRate' });
     self.dateFormat = ko.observable('fromNow').extend({ persist: 'pageDateFormat' });
-    self.displayTabbed = ko.observable().extend({ persist: 'displayTabbed' });
+    self.displayTabbed = ko.observable(false).extend({ persist: 'displayTabbed' });
     self.displayCompact = ko.observable(false).extend({ persist: 'displayCompact' });
     self.displayFullWidth = ko.observable(false).extend({ persist: 'displayFullWidth' });
     self.confirmDeleteQueue = ko.observable(true).extend({ persist: 'confirmDeleteQueue' });

interfaces/wizard/one.html

@@ -70,10 +70,12 @@
                                 <label for="ssl_verify" class="col-sm-4 control-label">$T('opt-ssl_verify')</label>
                                 <div class="col-sm-8">
                                     <select name="ssl_verify" id="ssl_verify" class="form-control">
-                                        <option value="2" <!--#if $ssl_verify == 2 then 'selected="selected"' else ""#--> >$T('ssl_verify-strict')</option>
-                                        <option value="1" <!--#if $ssl_verify == 1 then 'selected="selected"' else ""#--> >$T('ssl_verify-normal')</option>
+                                        <option value="3" <!--#if $ssl_verify == 3 then 'selected="selected"' else ""#--> >$T('ssl_verify-strict')</option>
+                                        <option value="2" <!--#if $ssl_verify == 2 then 'selected="selected"' else ""#--> >$T('ssl_verify-medium')</option>
+                                        <option value="1" <!--#if $ssl_verify == 1 then 'selected="selected"' else ""#--> >$T('ssl_verify-minimal')</option>
                                         <option value="0" <!--#if $ssl_verify == 0 then 'selected="selected"' else ""#--> >$T('ssl_verify-disabled')</option>
                                     </select>
+                                    <span class="desc">$T('explain-ssl_verify').replace('-', '<br/>-')</span>
                                 </div>
                             </div>
                         </div>

interfaces/wizard/static/style.css

@@ -88,6 +88,10 @@ label {
     float: right;
     margin: 0;
 }
+.desc {
+    font-size: 12px;
+    font-style: italic;
+}
 .align-right {
     text-align: right;
 }

linux/org.sabnzbd.sabnzbd.appdata.xml

@@ -30,6 +30,8 @@
   <url type="faq">https://sabnzbd.org/wiki/faq</url>
   <url type="contact">https://sabnzbd.org/live-chat.html</url>
   <releases>
+    <release version="4.4.1" date="2024-12-23" type="stable"/>
+    <release version="4.4.0" date="2024-12-09" type="stable"/>
     <release version="4.3.3" date="2024-08-01" type="stable"/>
     <release version="4.3.2" date="2024-05-30" type="stable"/>
     <release version="4.3.1" date="2024-05-03" type="stable"/>

po/email/SABemail.pot

@@ -4,7 +4,7 @@
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: SABnzbd-4.4.0Alpha2\n"
+"Project-Id-Version: SABnzbd-4.4.0Beta2\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: team@sabnzbd.org\n"
 "Language-Team: SABnzbd <team@sabnzbd.org>\n"

po/email/cs.po

@@ -3,7 +3,7 @@
 # 
 msgid ""
 msgstr ""
-"Project-Id-Version: SABnzbd-4.4.0Alpha1\n"
+"Project-Id-Version: SABnzbd-4.4.0Beta2\n"
 "PO-Revision-Date: 2020-06-27 15:56+0000\n"
 "Language-Team: Czech (https://app.transifex.com/sabnzbd/teams/111101/cs/)\n"
 "MIME-Version: 1.0\n"

po/email/da.po

@@ -6,7 +6,7 @@
 # 
 msgid ""
 msgstr ""
-"Project-Id-Version: SABnzbd-4.4.0Alpha1\n"
+"Project-Id-Version: SABnzbd-4.4.0Beta2\n"
 "PO-Revision-Date: 2020-06-27 15:56+0000\n"
 "Last-Translator: Safihre <safihre@sabnzbd.org>, 2020\n"
 "Language-Team: Danish (https://app.transifex.com/sabnzbd/teams/111101/da/)\n"

po/email/de.po

@@ -6,7 +6,7 @@
 # 
 msgid ""
 msgstr ""
-"Project-Id-Version: SABnzbd-4.4.0Alpha1\n"
+"Project-Id-Version: SABnzbd-4.4.0Beta2\n"
 "PO-Revision-Date: 2020-06-27 15:56+0000\n"
 "Last-Translator: Safihre <safihre@sabnzbd.org>, 2020\n"
 "Language-Team: German (https://app.transifex.com/sabnzbd/teams/111101/de/)\n"

po/email/es.po

@@ -6,7 +6,7 @@
 # 
 msgid ""
 msgstr ""
-"Project-Id-Version: SABnzbd-4.4.0Alpha1\n"
+"Project-Id-Version: SABnzbd-4.4.0Beta2\n"
 "PO-Revision-Date: 2020-06-27 15:56+0000\n"
 "Last-Translator: Safihre <safihre@sabnzbd.org>, 2020\n"
 "Language-Team: Spanish (https://app.transifex.com/sabnzbd/teams/111101/es/)\n"

po/email/fi.po

@@ -6,7 +6,7 @@
 # 
 msgid ""
 msgstr ""
-"Project-Id-Version: SABnzbd-4.4.0Alpha1\n"
+"Project-Id-Version: SABnzbd-4.4.0Beta2\n"
 "PO-Revision-Date: 2020-06-27 15:56+0000\n"
 "Last-Translator: Safihre <safihre@sabnzbd.org>, 2020\n"
 "Language-Team: Finnish (https://app.transifex.com/sabnzbd/teams/111101/fi/)\n"

po/email/fr.po

@@ -6,7 +6,7 @@
 # 
 msgid ""
 msgstr ""
-"Project-Id-Version: SABnzbd-4.4.0Alpha1\n"
+"Project-Id-Version: SABnzbd-4.4.0Beta2\n"
 "PO-Revision-Date: 2020-06-27 15:56+0000\n"
 "Last-Translator: Safihre <safihre@sabnzbd.org>, 2020\n"
 "Language-Team: French (https://app.transifex.com/sabnzbd/teams/111101/fr/)\n"

po/email/he.po

@@ -6,7 +6,7 @@
 # 
 msgid ""
 msgstr ""
-"Project-Id-Version: SABnzbd-4.4.0Alpha1\n"
+"Project-Id-Version: SABnzbd-4.4.0Beta2\n"
 "PO-Revision-Date: 2020-06-27 15:56+0000\n"
 "Last-Translator: ION, 2020\n"
 "Language-Team: Hebrew (https://app.transifex.com/sabnzbd/teams/111101/he/)\n"

po/email/it.po

@@ -3,7 +3,7 @@
 # 
 msgid ""
 msgstr ""
-"Project-Id-Version: SABnzbd-4.4.0Alpha1\n"
+"Project-Id-Version: SABnzbd-4.4.0Beta2\n"
 "PO-Revision-Date: 2020-06-27 15:56+0000\n"
 "Language-Team: Italian (https://app.transifex.com/sabnzbd/teams/111101/it/)\n"
 "MIME-Version: 1.0\n"

po/email/nb.po

@@ -6,7 +6,7 @@
 # 
 msgid ""
 msgstr ""
-"Project-Id-Version: SABnzbd-4.4.0Alpha1\n"
+"Project-Id-Version: SABnzbd-4.4.0Beta2\n"
 "PO-Revision-Date: 2020-06-27 15:56+0000\n"
 "Last-Translator: Safihre <safihre@sabnzbd.org>, 2020\n"
 "Language-Team: Norwegian Bokmål (https://app.transifex.com/sabnzbd/teams/111101/nb/)\n"

po/email/nl.po

@@ -6,7 +6,7 @@
 # 
 msgid ""
 msgstr ""
-"Project-Id-Version: SABnzbd-4.4.0Alpha1\n"
+"Project-Id-Version: SABnzbd-4.4.0Beta2\n"
 "PO-Revision-Date: 2020-06-27 15:56+0000\n"
 "Last-Translator: Safihre <safihre@sabnzbd.org>, 2020\n"
 "Language-Team: Dutch (https://app.transifex.com/sabnzbd/teams/111101/nl/)\n"

po/email/pl.po

@@ -6,7 +6,7 @@
 # 
 msgid ""
 msgstr ""
-"Project-Id-Version: SABnzbd-4.4.0Alpha1\n"
+"Project-Id-Version: SABnzbd-4.4.0Beta2\n"
 "PO-Revision-Date: 2020-06-27 15:56+0000\n"
 "Last-Translator: Safihre <safihre@sabnzbd.org>, 2020\n"
 "Language-Team: Polish (https://app.transifex.com/sabnzbd/teams/111101/pl/)\n"

po/email/pt_BR.po

@@ -6,7 +6,7 @@
 # 
 msgid ""
 msgstr ""
-"Project-Id-Version: SABnzbd-4.4.0Alpha1\n"
+"Project-Id-Version: SABnzbd-4.4.0Beta2\n"
 "PO-Revision-Date: 2020-06-27 15:56+0000\n"
 "Last-Translator: Safihre <safihre@sabnzbd.org>, 2020\n"
 "Language-Team: Portuguese (Brazil) (https://app.transifex.com/sabnzbd/teams/111101/pt_BR/)\n"

po/email/ro.po

@@ -6,7 +6,7 @@
 # 
 msgid ""
 msgstr ""
-"Project-Id-Version: SABnzbd-4.4.0Alpha1\n"
+"Project-Id-Version: SABnzbd-4.4.0Beta2\n"
 "PO-Revision-Date: 2020-06-27 15:56+0000\n"
 "Last-Translator: Safihre <safihre@sabnzbd.org>, 2020\n"
 "Language-Team: Romanian (https://app.transifex.com/sabnzbd/teams/111101/ro/)\n"

po/email/ru.po

@@ -6,7 +6,7 @@
 # 
 msgid ""
 msgstr ""
-"Project-Id-Version: SABnzbd-4.4.0Alpha1\n"
+"Project-Id-Version: SABnzbd-4.4.0Beta2\n"
 "PO-Revision-Date: 2020-06-27 15:56+0000\n"
 "Last-Translator: Safihre <safihre@sabnzbd.org>, 2020\n"
 "Language-Team: Russian (https://app.transifex.com/sabnzbd/teams/111101/ru/)\n"

po/email/sr.po

@@ -6,7 +6,7 @@
 # 
 msgid ""
 msgstr ""
-"Project-Id-Version: SABnzbd-4.4.0Alpha1\n"
+"Project-Id-Version: SABnzbd-4.4.0Beta2\n"
 "PO-Revision-Date: 2020-06-27 15:56+0000\n"
 "Last-Translator: Safihre <safihre@sabnzbd.org>, 2020\n"
 "Language-Team: Serbian (https://app.transifex.com/sabnzbd/teams/111101/sr/)\n"

po/email/sv.po

@@ -6,7 +6,7 @@
 # 
 msgid ""
 msgstr ""
-"Project-Id-Version: SABnzbd-4.4.0Alpha1\n"
+"Project-Id-Version: SABnzbd-4.4.0Beta2\n"
 "PO-Revision-Date: 2020-06-27 15:56+0000\n"
 "Last-Translator: Safihre <safihre@sabnzbd.org>, 2020\n"
 "Language-Team: Swedish (https://app.transifex.com/sabnzbd/teams/111101/sv/)\n"

po/email/zh_CN.po

@@ -6,7 +6,7 @@
 # 
 msgid ""
 msgstr ""
-"Project-Id-Version: SABnzbd-4.4.0Alpha1\n"
+"Project-Id-Version: SABnzbd-4.4.0Beta2\n"
 "PO-Revision-Date: 2020-06-27 15:56+0000\n"
 "Last-Translator: Safihre <safihre@sabnzbd.org>, 2020\n"
 "Language-Team: Chinese (China) (https://app.transifex.com/sabnzbd/teams/111101/zh_CN/)\n"

po/main/SABnzbd.pot

@@ -4,7 +4,7 @@
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: SABnzbd-4.4.0Alpha2\n"
+"Project-Id-Version: SABnzbd-4.4.0Beta2\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: team@sabnzbd.org\n"
 "Language-Team: SABnzbd <team@sabnzbd.org>\n"
@@ -168,6 +168,14 @@ msgstr ""
 msgid "Could not connect to %s on port %s. It appears that %s operates as a web server (port 80), possibly an indexer, not a usenet server. You have to fill a usenet server."
 msgstr ""
 
+#: sabnzbd/api.py
+msgid "Could not connect to %s on port %s. Use the default usenet settings: port 563 and SSL turned on"
+msgstr ""
+
+#: sabnzbd/api.py
+msgid "Could not connect to %s on port %s. Use the default usenet settings: port 119 and SSL turned off"
+msgstr ""
+
 #: sabnzbd/api.py, sabnzbd/interface.py
 msgid "Server address \"%s:%s\" is not valid."
 msgstr ""
@@ -327,6 +335,11 @@ msgstr ""
 msgid "Do not use a folder in the application folder as your Scripts Folder, it might be emptied during updates."
 msgstr ""
 
+#. Warning message
+#: sabnzbd/cfg.py
+msgid "The par2 application was switched, any custom par2 parameters were removed"
+msgstr ""
+
 #. Warning message
 #: sabnzbd/config.py
 msgid "Configuration locked, cannot save settings"
@@ -872,6 +885,10 @@ msgstr ""
 msgid "Unpacking failed, write error or disk is full?"
 msgstr ""
 
+#: sabnzbd/newsunpack.py
+msgid "Unpacking failed, disk full"
+msgstr ""
+
 #: sabnzbd/newsunpack.py
 msgid "Unpacking failed, path is too long"
 msgstr ""

po/main/cs.po

@@ -7,7 +7,7 @@
 # 
 msgid ""
 msgstr ""
-"Project-Id-Version: SABnzbd-4.4.0Alpha2\n"
+"Project-Id-Version: SABnzbd-4.4.0Beta1\n"
 "PO-Revision-Date: 2020-06-27 15:49+0000\n"
 "Last-Translator: Safihre <safihre@sabnzbd.org>, 2023\n"
 "Language-Team: Czech (https://app.transifex.com/sabnzbd/teams/111101/cs/)\n"
@@ -188,6 +188,18 @@ msgid ""
 " a usenet server."
 msgstr ""
 
+#: sabnzbd/api.py
+msgid ""
+"Could not connect to %s on port %s. Use the default usenet settings: port "
+"563 and SSL turned on"
+msgstr ""
+
+#: sabnzbd/api.py
+msgid ""
+"Could not connect to %s on port %s. Use the default usenet settings: port "
+"119 and SSL turned off"
+msgstr ""
+
 #: sabnzbd/api.py, sabnzbd/interface.py
 msgid "Server address \"%s:%s\" is not valid."
 msgstr "Adresa serveru \"%s:%s\" není správná."
@@ -362,6 +374,12 @@ msgid ""
 "might be emptied during updates."
 msgstr ""
 
+#. Warning message
+#: sabnzbd/cfg.py
+msgid ""
+"The par2 application was switched, any custom par2 parameters were removed"
+msgstr ""
+
 #. Warning message
 #: sabnzbd/config.py
 msgid "Configuration locked, cannot save settings"
@@ -933,6 +951,10 @@ msgstr ""
 msgid "Unpacking failed, write error or disk is full?"
 msgstr "Rozbalování selhalo, chyba zápisu nebo plný disk?"
 
+#: sabnzbd/newsunpack.py
+msgid "Unpacking failed, disk full"
+msgstr ""
+
 #: sabnzbd/newsunpack.py
 msgid "Unpacking failed, path is too long"
 msgstr "Rozbalování selhalo, cesta k souboru je příliš dlouhá."

po/main/da.po

@@ -6,7 +6,7 @@
 # 
 msgid ""
 msgstr ""
-"Project-Id-Version: SABnzbd-4.4.0Alpha2\n"
+"Project-Id-Version: SABnzbd-4.4.0Beta1\n"
 "PO-Revision-Date: 2020-06-27 15:49+0000\n"
 "Last-Translator: Safihre <safihre@sabnzbd.org>, 2023\n"
 "Language-Team: Danish (https://app.transifex.com/sabnzbd/teams/111101/da/)\n"
@@ -188,6 +188,18 @@ msgid ""
 " a usenet server."
 msgstr ""
 
+#: sabnzbd/api.py
+msgid ""
+"Could not connect to %s on port %s. Use the default usenet settings: port "
+"563 and SSL turned on"
+msgstr ""
+
+#: sabnzbd/api.py
+msgid ""
+"Could not connect to %s on port %s. Use the default usenet settings: port "
+"119 and SSL turned off"
+msgstr ""
+
 #: sabnzbd/api.py, sabnzbd/interface.py
 msgid "Server address \"%s:%s\" is not valid."
 msgstr "Serveradressen \"%s:%s\" er ikke gyldigt."
@@ -365,6 +377,12 @@ msgid ""
 "might be emptied during updates."
 msgstr ""
 
+#. Warning message
+#: sabnzbd/cfg.py
+msgid ""
+"The par2 application was switched, any custom par2 parameters were removed"
+msgstr ""
+
 #. Warning message
 #: sabnzbd/config.py
 msgid "Configuration locked, cannot save settings"
@@ -941,6 +959,10 @@ msgstr "Udpakningen fejlede, da filen er for stor til filsystemet (FAT?)"
 msgid "Unpacking failed, write error or disk is full?"
 msgstr "Udpakning mislykkedes, skrivefejl eller disken fuld?"
 
+#: sabnzbd/newsunpack.py
+msgid "Unpacking failed, disk full"
+msgstr ""
+
 #: sabnzbd/newsunpack.py
 msgid "Unpacking failed, path is too long"
 msgstr "Udpakningen mislykkedes, stien er for lang"

po/main/de.po

@@ -15,12 +15,13 @@
 # Safihre <safihre@sabnzbd.org>, 2024
 # Gjelbrim Haskaj, 2024
 # Stefan Rodriguez Galeano, 2024
+# M Z, 2024
 # 
 msgid ""
 msgstr ""
-"Project-Id-Version: SABnzbd-4.4.0Alpha1\n"
+"Project-Id-Version: SABnzbd-4.4.0Beta2\n"
 "PO-Revision-Date: 2020-06-27 15:49+0000\n"
-"Last-Translator: Stefan Rodriguez Galeano, 2024\n"
+"Last-Translator: M Z, 2024\n"
 "Language-Team: German (https://app.transifex.com/sabnzbd/teams/111101/de/)\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -212,6 +213,22 @@ msgstr ""
 "als sei %s ein Webserver (Port 80), vielleicht ein Indexer, aber kein "
 "Usenet-Server. Trage einen Usenet-Server ein."
 
+#: sabnzbd/api.py
+msgid ""
+"Could not connect to %s on port %s. Use the default usenet settings: port "
+"563 and SSL turned on"
+msgstr ""
+"Konnte keine Verbindung zu %s auf Port %s herstellen. Verwenden Sie die "
+"Standard-Usenet-Einstellungen: Port 563 und aktiviertes SSL."
+
+#: sabnzbd/api.py
+msgid ""
+"Could not connect to %s on port %s. Use the default usenet settings: port "
+"119 and SSL turned off"
+msgstr ""
+"Konnte keine Verbindung zu %s auf Port %s herstellen. Verwenden Sie die "
+"Standard-Usenet-Einstellungen: Port 119 und deaktiviertes SSL."
+
 #: sabnzbd/api.py, sabnzbd/interface.py
 msgid "Server address \"%s:%s\" is not valid."
 msgstr "Server-Adresse \"%s:%s\" ist ungültig."
@@ -402,6 +419,14 @@ msgstr ""
 "Verwenden Sie keinen Ordner im Anwendungsordner als Ihren Skriptordner, er "
 "könnte während Updates geleert werden."
 
+#. Warning message
+#: sabnzbd/cfg.py
+msgid ""
+"The par2 application was switched, any custom par2 parameters were removed"
+msgstr ""
+"Die Par2-Anwendung wurde geändert, benutzerdefinierte Par2-Parameter wurden "
+"entfernt."
+
 #. Warning message
 #: sabnzbd/config.py
 msgid "Configuration locked, cannot save settings"
@@ -1004,6 +1029,10 @@ msgid "Unpacking failed, write error or disk is full?"
 msgstr ""
 "Entpacken fehlgeschlagen. Fehler beim Schreiben oder volle Festplatte?"
 
+#: sabnzbd/newsunpack.py
+msgid "Unpacking failed, disk full"
+msgstr "Fehler beim Entpacken: Festplatte voll"
+
 #: sabnzbd/newsunpack.py
 msgid "Unpacking failed, path is too long"
 msgstr "Entpacken fehlgeschlagen, Pfad ist zu lang"
@@ -2461,7 +2490,7 @@ msgstr "NZBs und Dateien löschen"
 #. Checkbox if job should be added to Archive
 #: sabnzbd/skintext.py
 msgid "Permanently delete (skip archive)"
-msgstr "erhaft löschen (Archiv überspringen)"
+msgstr "Endgültig löschen (Archiv überspringen)"
 
 #. Caption for missing articles in Queue
 #: sabnzbd/skintext.py
@@ -4305,7 +4334,7 @@ msgstr ""
 #. Apprise settings
 #: sabnzbd/skintext.py
 msgid "Default Apprise URLs"
-msgstr ""
+msgstr "Standard Apprise URLs"
 
 #. Apprise settings
 #: sabnzbd/skintext.py

po/main/es.po

@@ -4,13 +4,14 @@
 # Translators:
 # Ester Molla Aragones <moarages@gmail.com>, 2020
 # 1024mb <angelb2203@gmail.com>, 2023
-# Safihre <safihre@sabnzbd.org>, 2023
+# Carmen Gonzalez, 2024
+# Safihre <safihre@sabnzbd.org>, 2024
 # 
 msgid ""
 msgstr ""
-"Project-Id-Version: SABnzbd-4.4.0Alpha2\n"
+"Project-Id-Version: SABnzbd-4.4.0Beta2\n"
 "PO-Revision-Date: 2020-06-27 15:49+0000\n"
-"Last-Translator: Safihre <safihre@sabnzbd.org>, 2023\n"
+"Last-Translator: Safihre <safihre@sabnzbd.org>, 2024\n"
 "Language-Team: Spanish (https://app.transifex.com/sabnzbd/teams/111101/es/)\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -196,6 +197,25 @@ msgid ""
 "server (port 80), possibly an indexer, not a usenet server. You have to fill"
 " a usenet server."
 msgstr ""
+"No se pudo conectar a %s en el puerto %s. Parece que %s funciona como un "
+"servidor web (puerto 80), posiblemente un indexador, no un servidor Usenet. "
+"Debe agregar un servidor Usenet."
+
+#: sabnzbd/api.py
+msgid ""
+"Could not connect to %s on port %s. Use the default usenet settings: port "
+"563 and SSL turned on"
+msgstr ""
+"No se pudo conectar a %s en el puerto %s. Utilice la configuración de Usenet"
+" predeterminada: puerto 563 y SSL activado"
+
+#: sabnzbd/api.py
+msgid ""
+"Could not connect to %s on port %s. Use the default usenet settings: port "
+"119 and SSL turned off"
+msgstr ""
+"No se pudo conectar a %s en el puerto %s. Utilice la configuración de Usenet"
+" predeterminada: puerto 119 y SSL desactivado"
 
 #: sabnzbd/api.py, sabnzbd/interface.py
 msgid "Server address \"%s:%s\" is not valid."
@@ -345,7 +365,7 @@ msgstr "Dirección del servidor no válida."
 
 #: sabnzbd/cfg.py
 msgid "%s is not a valid script"
-msgstr ""
+msgstr "%s no es un script válido"
 
 #: sabnzbd/cfg.py
 msgid "%s is not a correct octal value"
@@ -357,11 +377,13 @@ msgid ""
 "Permissions setting of %s might deny SABnzbd access to the files and folders"
 " it creates."
 msgstr ""
+"La configuración de permisos de %s podría negar a SABnzbd el acceso a los "
+"archivos y carpetas que crea."
 
 #. Warning message
 #: sabnzbd/cfg.py
 msgid "Network path \"%s\" should not be used here"
-msgstr ""
+msgstr "La ruta de red \"%s\" no debe usarse aquí"
 
 #: sabnzbd/cfg.py
 msgid "Queue not empty, cannot change folder."
@@ -380,6 +402,12 @@ msgid ""
 "might be emptied during updates."
 msgstr ""
 
+#. Warning message
+#: sabnzbd/cfg.py
+msgid ""
+"The par2 application was switched, any custom par2 parameters were removed"
+msgstr ""
+
 #. Warning message
 #: sabnzbd/config.py
 msgid "Configuration locked, cannot save settings"
@@ -974,6 +1002,10 @@ msgid "Unpacking failed, write error or disk is full?"
 msgstr ""
 "Error al descomprimir; ¿Error de escritura, o tal vez el disco está lleno?"
 
+#: sabnzbd/newsunpack.py
+msgid "Unpacking failed, disk full"
+msgstr ""
+
 #: sabnzbd/newsunpack.py
 msgid "Unpacking failed, path is too long"
 msgstr "Aperture de archivo fallo, la via es muy larga"

po/main/fi.po

@@ -6,7 +6,7 @@
 # 
 msgid ""
 msgstr ""
-"Project-Id-Version: SABnzbd-4.4.0Alpha2\n"
+"Project-Id-Version: SABnzbd-4.4.0Beta1\n"
 "PO-Revision-Date: 2020-06-27 15:49+0000\n"
 "Last-Translator: Safihre <safihre@sabnzbd.org>, 2023\n"
 "Language-Team: Finnish (https://app.transifex.com/sabnzbd/teams/111101/fi/)\n"
@@ -190,6 +190,18 @@ msgid ""
 " a usenet server."
 msgstr ""
 
+#: sabnzbd/api.py
+msgid ""
+"Could not connect to %s on port %s. Use the default usenet settings: port "
+"563 and SSL turned on"
+msgstr ""
+
+#: sabnzbd/api.py
+msgid ""
+"Could not connect to %s on port %s. Use the default usenet settings: port "
+"119 and SSL turned off"
+msgstr ""
+
 #: sabnzbd/api.py, sabnzbd/interface.py
 msgid "Server address \"%s:%s\" is not valid."
 msgstr "Palvelimen osoite \"%s:%s\" ei ole kelvollinen."
@@ -361,6 +373,12 @@ msgid ""
 "might be emptied during updates."
 msgstr ""
 
+#. Warning message
+#: sabnzbd/cfg.py
+msgid ""
+"The par2 application was switched, any custom par2 parameters were removed"
+msgstr ""
+
 #. Warning message
 #: sabnzbd/config.py
 msgid "Configuration locked, cannot save settings"
@@ -936,6 +954,10 @@ msgstr ""
 msgid "Unpacking failed, write error or disk is full?"
 msgstr "Purkaminen epäonnistui, kirjoitusvirhe tai levy täynnä?"
 
+#: sabnzbd/newsunpack.py
+msgid "Unpacking failed, disk full"
+msgstr ""
+
 #: sabnzbd/newsunpack.py
 msgid "Unpacking failed, path is too long"
 msgstr "Purkaminen epäonnistui, polku on liian pitkä"

po/main/fr.po

@@ -7,7 +7,7 @@
 # 
 msgid ""
 msgstr ""
-"Project-Id-Version: SABnzbd-4.4.0Alpha1\n"
+"Project-Id-Version: SABnzbd-4.4.0Beta2\n"
 "PO-Revision-Date: 2020-06-27 15:49+0000\n"
 "Last-Translator: Fred L <88com88@gmail.com>, 2024\n"
 "Language-Team: French (https://app.transifex.com/sabnzbd/teams/111101/fr/)\n"
@@ -203,6 +203,22 @@ msgstr ""
 "comme un serveur web (port 80), peut-être un indexeur, et non comme un "
 "serveur Usenet. Vous devez spécifier un serveur Usenet."
 
+#: sabnzbd/api.py
+msgid ""
+"Could not connect to %s on port %s. Use the default usenet settings: port "
+"563 and SSL turned on"
+msgstr ""
+"Impossible de se connecter à %s sur le port %s. Utilisez les paramètres "
+"usenet par défaut : port 563 et SSL activés"
+
+#: sabnzbd/api.py
+msgid ""
+"Could not connect to %s on port %s. Use the default usenet settings: port "
+"119 and SSL turned off"
+msgstr ""
+"Impossible de se connecter à %s sur le port %s. Utilisez les paramètres "
+"usenet par défaut : port 119 et SSL désactivés"
+
 #: sabnzbd/api.py, sabnzbd/interface.py
 msgid "Server address \"%s:%s\" is not valid."
 msgstr "L' adresse du serveur \"%s:%s\" n'est pas valide."
@@ -395,6 +411,14 @@ msgstr ""
 "N'utilisez pas un dossier à l'intérieur du dossier de l'application pour y "
 "stocker les scripts, il pourrait être vidé lors des mises à jour."
 
+#. Warning message
+#: sabnzbd/cfg.py
+msgid ""
+"The par2 application was switched, any custom par2 parameters were removed"
+msgstr ""
+"L'application par2 a été changée, tous les paramètres par2 personnalisés ont"
+" été supprimés"
+
 #. Warning message
 #: sabnzbd/config.py
 msgid "Configuration locked, cannot save settings"
@@ -998,6 +1022,10 @@ msgid "Unpacking failed, write error or disk is full?"
 msgstr ""
 "Échec de l'extraction, erreur d'écriture ou espace disque insuffisant ?"
 
+#: sabnzbd/newsunpack.py
+msgid "Unpacking failed, disk full"
+msgstr "Échec de l'extraction, disque plein"
+
 #: sabnzbd/newsunpack.py
 msgid "Unpacking failed, path is too long"
 msgstr "Extraction échoué, le chemin est trop long"

po/main/he.po

@@ -7,7 +7,7 @@
 # 
 msgid ""
 msgstr ""
-"Project-Id-Version: SABnzbd-4.4.0Alpha2\n"
+"Project-Id-Version: SABnzbd-4.4.0Beta1\n"
 "PO-Revision-Date: 2020-06-27 15:49+0000\n"
 "Last-Translator: ION, 2024\n"
 "Language-Team: Hebrew (https://app.transifex.com/sabnzbd/teams/111101/he/)\n"
@@ -189,6 +189,18 @@ msgstr ""
 "לא היה ניתן להתחבר אל %s על פתחה %s. נראה כי %s פועל כשרת רשת (פתחה 80), "
 "כנראה מדדן, לא שרת Usenet. אתה חייב למלא שרת Usenet."
 
+#: sabnzbd/api.py
+msgid ""
+"Could not connect to %s on port %s. Use the default usenet settings: port "
+"563 and SSL turned on"
+msgstr ""
+
+#: sabnzbd/api.py
+msgid ""
+"Could not connect to %s on port %s. Use the default usenet settings: port "
+"119 and SSL turned off"
+msgstr ""
+
 #: sabnzbd/api.py, sabnzbd/interface.py
 msgid "Server address \"%s:%s\" is not valid."
 msgstr "כתובת השרת \"%s:%s\" אינה תקפה."
@@ -365,6 +377,12 @@ msgstr ""
 "אל תשתמש בתיקייה בתוך תיקיית היישום כתיקיית התסריטים שלך, היא עשויה להתרוקן "
 "במהלך עדכונים."
 
+#. Warning message
+#: sabnzbd/cfg.py
+msgid ""
+"The par2 application was switched, any custom par2 parameters were removed"
+msgstr ""
+
 #. Warning message
 #: sabnzbd/config.py
 msgid "Configuration locked, cannot save settings"
@@ -944,6 +962,10 @@ msgstr "פריקה נכשלה, קובץ גדול מדי עבור מערכת הק
 msgid "Unpacking failed, write error or disk is full?"
 msgstr "פריקה נכשלה, שגיאת כתיבה או דיסק מלא?"
 
+#: sabnzbd/newsunpack.py
+msgid "Unpacking failed, disk full"
+msgstr ""
+
 #: sabnzbd/newsunpack.py
 msgid "Unpacking failed, path is too long"
 msgstr "פריקה נכשלה, נתיב ארוך מדי"

po/main/it.po

@@ -3,7 +3,7 @@
 # 
 msgid ""
 msgstr ""
-"Project-Id-Version: SABnzbd-4.4.0Alpha2\n"
+"Project-Id-Version: SABnzbd-4.4.0Beta1\n"
 "PO-Revision-Date: 2020-06-27 15:49+0000\n"
 "Language-Team: Italian (https://app.transifex.com/sabnzbd/teams/111101/it/)\n"
 "MIME-Version: 1.0\n"
@@ -178,6 +178,18 @@ msgid ""
 " a usenet server."
 msgstr ""
 
+#: sabnzbd/api.py
+msgid ""
+"Could not connect to %s on port %s. Use the default usenet settings: port "
+"563 and SSL turned on"
+msgstr ""
+
+#: sabnzbd/api.py
+msgid ""
+"Could not connect to %s on port %s. Use the default usenet settings: port "
+"119 and SSL turned off"
+msgstr ""
+
 #: sabnzbd/api.py, sabnzbd/interface.py
 msgid "Server address \"%s:%s\" is not valid."
 msgstr ""
@@ -348,6 +360,12 @@ msgid ""
 "might be emptied during updates."
 msgstr ""
 
+#. Warning message
+#: sabnzbd/cfg.py
+msgid ""
+"The par2 application was switched, any custom par2 parameters were removed"
+msgstr ""
+
 #. Warning message
 #: sabnzbd/config.py
 msgid "Configuration locked, cannot save settings"
@@ -908,6 +926,10 @@ msgstr ""
 msgid "Unpacking failed, write error or disk is full?"
 msgstr ""
 
+#: sabnzbd/newsunpack.py
+msgid "Unpacking failed, disk full"
+msgstr ""
+
 #: sabnzbd/newsunpack.py
 msgid "Unpacking failed, path is too long"
 msgstr ""

po/main/nb.po

@@ -6,7 +6,7 @@
 # 
 msgid ""
 msgstr ""
-"Project-Id-Version: SABnzbd-4.4.0Alpha2\n"
+"Project-Id-Version: SABnzbd-4.4.0Beta1\n"
 "PO-Revision-Date: 2020-06-27 15:49+0000\n"
 "Last-Translator: Safihre <safihre@sabnzbd.org>, 2023\n"
 "Language-Team: Norwegian Bokmål (https://app.transifex.com/sabnzbd/teams/111101/nb/)\n"
@@ -186,6 +186,18 @@ msgid ""
 " a usenet server."
 msgstr ""
 
+#: sabnzbd/api.py
+msgid ""
+"Could not connect to %s on port %s. Use the default usenet settings: port "
+"563 and SSL turned on"
+msgstr ""
+
+#: sabnzbd/api.py
+msgid ""
+"Could not connect to %s on port %s. Use the default usenet settings: port "
+"119 and SSL turned off"
+msgstr ""
+
 #: sabnzbd/api.py, sabnzbd/interface.py
 msgid "Server address \"%s:%s\" is not valid."
 msgstr "Serveradressen \"%s:%s\" er ikke gyldig."
@@ -359,6 +371,12 @@ msgid ""
 "might be emptied during updates."
 msgstr ""
 
+#. Warning message
+#: sabnzbd/cfg.py
+msgid ""
+"The par2 application was switched, any custom par2 parameters were removed"
+msgstr ""
+
 #. Warning message
 #: sabnzbd/config.py
 msgid "Configuration locked, cannot save settings"
@@ -933,6 +951,10 @@ msgstr "Utpakking feilet, filen er for stor for filsystemet (FAT?)"
 msgid "Unpacking failed, write error or disk is full?"
 msgstr "Utpakking mislyktes, skrivefeil eller er disken full?"
 
+#: sabnzbd/newsunpack.py
+msgid "Unpacking failed, disk full"
+msgstr ""
+
 #: sabnzbd/newsunpack.py
 msgid "Unpacking failed, path is too long"
 msgstr "Utpakking feilet, stien er for lang"

po/main/nl.po

@@ -8,7 +8,7 @@
 # 
 msgid ""
 msgstr ""
-"Project-Id-Version: SABnzbd-4.4.0Alpha2\n"
+"Project-Id-Version: SABnzbd-4.4.0Beta1\n"
 "PO-Revision-Date: 2020-06-27 15:49+0000\n"
 "Last-Translator: Safihre <safihre@sabnzbd.org>, 2024\n"
 "Language-Team: Dutch (https://app.transifex.com/sabnzbd/teams/111101/nl/)\n"
@@ -198,6 +198,18 @@ msgstr ""
 "functioneert als een webserver (poort 80), mogelijk een indexer, geen "
 "usenetserver. Vul een usenetserver in."
 
+#: sabnzbd/api.py
+msgid ""
+"Could not connect to %s on port %s. Use the default usenet settings: port "
+"563 and SSL turned on"
+msgstr ""
+
+#: sabnzbd/api.py
+msgid ""
+"Could not connect to %s on port %s. Use the default usenet settings: port "
+"119 and SSL turned off"
+msgstr ""
+
 #: sabnzbd/api.py, sabnzbd/interface.py
 msgid "Server address \"%s:%s\" is not valid."
 msgstr "Serveradres \"%s:%s\" is niet geldig."
@@ -386,6 +398,12 @@ msgstr ""
 "automatisch verwijderd worden tijdens updates. We adviseren een andere "
 "locatie te gebruiken voor je scripts."
 
+#. Warning message
+#: sabnzbd/cfg.py
+msgid ""
+"The par2 application was switched, any custom par2 parameters were removed"
+msgstr ""
+
 #. Warning message
 #: sabnzbd/config.py
 msgid "Configuration locked, cannot save settings"
@@ -987,6 +1005,10 @@ msgstr "Uitplakken mislukt, bestand te groot voor het bestandssysteem (FAT?)"
 msgid "Unpacking failed, write error or disk is full?"
 msgstr "Uitpakken mislukt,  schrijffout of schijf vol?"
 
+#: sabnzbd/newsunpack.py
+msgid "Unpacking failed, disk full"
+msgstr ""
+
 #: sabnzbd/newsunpack.py
 msgid "Unpacking failed, path is too long"
 msgstr "Uitpakken mislukt, bestandspad is te lang"

po/main/pl.po

@@ -6,7 +6,7 @@
 # 
 msgid ""
 msgstr ""
-"Project-Id-Version: SABnzbd-4.4.0Alpha2\n"
+"Project-Id-Version: SABnzbd-4.4.0Beta1\n"
 "PO-Revision-Date: 2020-06-27 15:49+0000\n"
 "Last-Translator: Safihre <safihre@sabnzbd.org>, 2023\n"
 "Language-Team: Polish (https://app.transifex.com/sabnzbd/teams/111101/pl/)\n"
@@ -184,6 +184,18 @@ msgid ""
 " a usenet server."
 msgstr ""
 
+#: sabnzbd/api.py
+msgid ""
+"Could not connect to %s on port %s. Use the default usenet settings: port "
+"563 and SSL turned on"
+msgstr ""
+
+#: sabnzbd/api.py
+msgid ""
+"Could not connect to %s on port %s. Use the default usenet settings: port "
+"119 and SSL turned off"
+msgstr ""
+
 #: sabnzbd/api.py, sabnzbd/interface.py
 msgid "Server address \"%s:%s\" is not valid."
 msgstr "Nieprawidłowy adres serwera \"%s:%s\"."
@@ -358,6 +370,12 @@ msgid ""
 "might be emptied during updates."
 msgstr ""
 
+#. Warning message
+#: sabnzbd/cfg.py
+msgid ""
+"The par2 application was switched, any custom par2 parameters were removed"
+msgstr ""
+
 #. Warning message
 #: sabnzbd/config.py
 msgid "Configuration locked, cannot save settings"
@@ -936,6 +954,10 @@ msgstr ""
 msgid "Unpacking failed, write error or disk is full?"
 msgstr "Rozpakowywanie nie powiodło się, błąd zapisu lub zapełniony dysk?"
 
+#: sabnzbd/newsunpack.py
+msgid "Unpacking failed, disk full"
+msgstr ""
+
 #: sabnzbd/newsunpack.py
 msgid "Unpacking failed, path is too long"
 msgstr "Rozpakowywanie nie powiodło się, zbyt długa ścieżka"

po/main/pt_BR.po

@@ -7,7 +7,7 @@
 # 
 msgid ""
 msgstr ""
-"Project-Id-Version: SABnzbd-4.4.0Alpha2\n"
+"Project-Id-Version: SABnzbd-4.4.0Beta1\n"
 "PO-Revision-Date: 2020-06-27 15:49+0000\n"
 "Last-Translator: Safihre <safihre@sabnzbd.org>, 2023\n"
 "Language-Team: Portuguese (Brazil) (https://app.transifex.com/sabnzbd/teams/111101/pt_BR/)\n"
@@ -191,6 +191,18 @@ msgid ""
 " a usenet server."
 msgstr ""
 
+#: sabnzbd/api.py
+msgid ""
+"Could not connect to %s on port %s. Use the default usenet settings: port "
+"563 and SSL turned on"
+msgstr ""
+
+#: sabnzbd/api.py
+msgid ""
+"Could not connect to %s on port %s. Use the default usenet settings: port "
+"119 and SSL turned off"
+msgstr ""
+
 #: sabnzbd/api.py, sabnzbd/interface.py
 msgid "Server address \"%s:%s\" is not valid."
 msgstr "Endereço de servidor \"%s:%s\" não é válido."
@@ -370,6 +382,12 @@ msgid ""
 "might be emptied during updates."
 msgstr ""
 
+#. Warning message
+#: sabnzbd/cfg.py
+msgid ""
+"The par2 application was switched, any custom par2 parameters were removed"
+msgstr ""
+
 #. Warning message
 #: sabnzbd/config.py
 msgid "Configuration locked, cannot save settings"
@@ -948,6 +966,10 @@ msgstr ""
 msgid "Unpacking failed, write error or disk is full?"
 msgstr "A descompactação falhou. Erro de escrita ou disco cheio?"
 
+#: sabnzbd/newsunpack.py
+msgid "Unpacking failed, disk full"
+msgstr ""
+
 #: sabnzbd/newsunpack.py
 msgid "Unpacking failed, path is too long"
 msgstr "Descompactação falhou, o caminho é muito extenso"

po/main/ro.po

@@ -7,7 +7,7 @@
 # 
 msgid ""
 msgstr ""
-"Project-Id-Version: SABnzbd-4.4.0Alpha2\n"
+"Project-Id-Version: SABnzbd-4.4.0Beta1\n"
 "PO-Revision-Date: 2020-06-27 15:49+0000\n"
 "Last-Translator: Safihre <safihre@sabnzbd.org>, 2023\n"
 "Language-Team: Romanian (https://app.transifex.com/sabnzbd/teams/111101/ro/)\n"
@@ -192,6 +192,18 @@ msgid ""
 " a usenet server."
 msgstr ""
 
+#: sabnzbd/api.py
+msgid ""
+"Could not connect to %s on port %s. Use the default usenet settings: port "
+"563 and SSL turned on"
+msgstr ""
+
+#: sabnzbd/api.py
+msgid ""
+"Could not connect to %s on port %s. Use the default usenet settings: port "
+"119 and SSL turned off"
+msgstr ""
+
 #: sabnzbd/api.py, sabnzbd/interface.py
 msgid "Server address \"%s:%s\" is not valid."
 msgstr "Adresa server \"%s:%s\" nu este validă"
@@ -374,6 +386,12 @@ msgid ""
 "might be emptied during updates."
 msgstr ""
 
+#. Warning message
+#: sabnzbd/cfg.py
+msgid ""
+"The par2 application was switched, any custom par2 parameters were removed"
+msgstr ""
+
 #. Warning message
 #: sabnzbd/config.py
 msgid "Configuration locked, cannot save settings"
@@ -959,6 +977,10 @@ msgstr ""
 msgid "Unpacking failed, write error or disk is full?"
 msgstr "Dezarhivare nereuşită, eroare scriere sau disc plin?"
 
+#: sabnzbd/newsunpack.py
+msgid "Unpacking failed, disk full"
+msgstr ""
+
 #: sabnzbd/newsunpack.py
 msgid "Unpacking failed, path is too long"
 msgstr "Dezarhivare eșuată, calea este prea lungă"

po/main/ru.po

@@ -6,7 +6,7 @@
 # 
 msgid ""
 msgstr ""
-"Project-Id-Version: SABnzbd-4.4.0Alpha2\n"
+"Project-Id-Version: SABnzbd-4.4.0Beta1\n"
 "PO-Revision-Date: 2020-06-27 15:49+0000\n"
 "Last-Translator: Safihre <safihre@sabnzbd.org>, 2023\n"
 "Language-Team: Russian (https://app.transifex.com/sabnzbd/teams/111101/ru/)\n"
@@ -186,6 +186,18 @@ msgid ""
 " a usenet server."
 msgstr ""
 
+#: sabnzbd/api.py
+msgid ""
+"Could not connect to %s on port %s. Use the default usenet settings: port "
+"563 and SSL turned on"
+msgstr ""
+
+#: sabnzbd/api.py
+msgid ""
+"Could not connect to %s on port %s. Use the default usenet settings: port "
+"119 and SSL turned off"
+msgstr ""
+
 #: sabnzbd/api.py, sabnzbd/interface.py
 msgid "Server address \"%s:%s\" is not valid."
 msgstr "Адрес сервера «%s:%s» является недопустимым."
@@ -358,6 +370,12 @@ msgid ""
 "might be emptied during updates."
 msgstr ""
 
+#. Warning message
+#: sabnzbd/cfg.py
+msgid ""
+"The par2 application was switched, any custom par2 parameters were removed"
+msgstr ""
+
 #. Warning message
 #: sabnzbd/config.py
 msgid "Configuration locked, cannot save settings"
@@ -932,6 +950,10 @@ msgstr ""
 msgid "Unpacking failed, write error or disk is full?"
 msgstr "Не удалось распаковать: ошибка записи или на диске нет места?"
 
+#: sabnzbd/newsunpack.py
+msgid "Unpacking failed, disk full"
+msgstr ""
+
 #: sabnzbd/newsunpack.py
 msgid "Unpacking failed, path is too long"
 msgstr ""

po/main/sr.po

@@ -6,7 +6,7 @@
 # 
 msgid ""
 msgstr ""
-"Project-Id-Version: SABnzbd-4.4.0Alpha2\n"
+"Project-Id-Version: SABnzbd-4.4.0Beta1\n"
 "PO-Revision-Date: 2020-06-27 15:49+0000\n"
 "Last-Translator: Safihre <safihre@sabnzbd.org>, 2023\n"
 "Language-Team: Serbian (https://app.transifex.com/sabnzbd/teams/111101/sr/)\n"
@@ -184,6 +184,18 @@ msgid ""
 " a usenet server."
 msgstr ""
 
+#: sabnzbd/api.py
+msgid ""
+"Could not connect to %s on port %s. Use the default usenet settings: port "
+"563 and SSL turned on"
+msgstr ""
+
+#: sabnzbd/api.py
+msgid ""
+"Could not connect to %s on port %s. Use the default usenet settings: port "
+"119 and SSL turned off"
+msgstr ""
+
 #: sabnzbd/api.py, sabnzbd/interface.py
 msgid "Server address \"%s:%s\" is not valid."
 msgstr "Adresa servera \"%s:%s\" je neispravna"
@@ -355,6 +367,12 @@ msgid ""
 "might be emptied during updates."
 msgstr ""
 
+#. Warning message
+#: sabnzbd/cfg.py
+msgid ""
+"The par2 application was switched, any custom par2 parameters were removed"
+msgstr ""
+
 #. Warning message
 #: sabnzbd/config.py
 msgid "Configuration locked, cannot save settings"
@@ -928,6 +946,10 @@ msgstr ""
 msgid "Unpacking failed, write error or disk is full?"
 msgstr "Neuspašno raspakivanje, greška u pisanju ili je disk pun?"
 
+#: sabnzbd/newsunpack.py
+msgid "Unpacking failed, disk full"
+msgstr ""
+
 #: sabnzbd/newsunpack.py
 msgid "Unpacking failed, path is too long"
 msgstr "Neuspešno raspakivanje, putanja je predugačka"

po/main/sv.po

@@ -6,7 +6,7 @@
 # 
 msgid ""
 msgstr ""
-"Project-Id-Version: SABnzbd-4.4.0Alpha2\n"
+"Project-Id-Version: SABnzbd-4.4.0Beta1\n"
 "PO-Revision-Date: 2020-06-27 15:49+0000\n"
 "Last-Translator: Safihre <safihre@sabnzbd.org>, 2023\n"
 "Language-Team: Swedish (https://app.transifex.com/sabnzbd/teams/111101/sv/)\n"
@@ -185,6 +185,18 @@ msgid ""
 " a usenet server."
 msgstr ""
 
+#: sabnzbd/api.py
+msgid ""
+"Could not connect to %s on port %s. Use the default usenet settings: port "
+"563 and SSL turned on"
+msgstr ""
+
+#: sabnzbd/api.py
+msgid ""
+"Could not connect to %s on port %s. Use the default usenet settings: port "
+"119 and SSL turned off"
+msgstr ""
+
 #: sabnzbd/api.py, sabnzbd/interface.py
 msgid "Server address \"%s:%s\" is not valid."
 msgstr "Serveradressen \"%s:%s\" är ej giltig."
@@ -355,6 +367,12 @@ msgid ""
 "might be emptied during updates."
 msgstr ""
 
+#. Warning message
+#: sabnzbd/cfg.py
+msgid ""
+"The par2 application was switched, any custom par2 parameters were removed"
+msgstr ""
+
 #. Warning message
 #: sabnzbd/config.py
 msgid "Configuration locked, cannot save settings"
@@ -930,6 +948,10 @@ msgstr ""
 msgid "Unpacking failed, write error or disk is full?"
 msgstr "Uppackning misslyckades, skrivfel eller disken full?"
 
+#: sabnzbd/newsunpack.py
+msgid "Unpacking failed, disk full"
+msgstr ""
+
 #: sabnzbd/newsunpack.py
 msgid "Unpacking failed, path is too long"
 msgstr "Uppackning misslyckades, sökvägen är för lång"

po/main/zh_CN.po

@@ -7,7 +7,7 @@
 # 
 msgid ""
 msgstr ""
-"Project-Id-Version: SABnzbd-4.4.0Alpha2\n"
+"Project-Id-Version: SABnzbd-4.4.0Beta1\n"
 "PO-Revision-Date: 2020-06-27 15:49+0000\n"
 "Last-Translator: Kangwei Li <lkw20010211@gmail.com>, 2023\n"
 "Language-Team: Chinese (China) (https://app.transifex.com/sabnzbd/teams/111101/zh_CN/)\n"
@@ -183,6 +183,18 @@ msgid ""
 " a usenet server."
 msgstr ""
 
+#: sabnzbd/api.py
+msgid ""
+"Could not connect to %s on port %s. Use the default usenet settings: port "
+"563 and SSL turned on"
+msgstr ""
+
+#: sabnzbd/api.py
+msgid ""
+"Could not connect to %s on port %s. Use the default usenet settings: port "
+"119 and SSL turned off"
+msgstr ""
+
 #: sabnzbd/api.py, sabnzbd/interface.py
 msgid "Server address \"%s:%s\" is not valid."
 msgstr "服务器地址 \"%s:%s\" 无效。"
@@ -353,6 +365,12 @@ msgid ""
 "might be emptied during updates."
 msgstr ""
 
+#. Warning message
+#: sabnzbd/cfg.py
+msgid ""
+"The par2 application was switched, any custom par2 parameters were removed"
+msgstr ""
+
 #. Warning message
 #: sabnzbd/config.py
 msgid "Configuration locked, cannot save settings"
@@ -923,6 +941,10 @@ msgstr "解压失败，文件太大文件系统不支持 (FAT?)"
 msgid "Unpacking failed, write error or disk is full?"
 msgstr "解压失败，写入出错或磁盘已满?"
 
+#: sabnzbd/newsunpack.py
+msgid "Unpacking failed, disk full"
+msgstr ""
+
 #: sabnzbd/newsunpack.py
 msgid "Unpacking failed, path is too long"
 msgstr "解压失败，路径过长"

po/nsis/SABnsis.pot

@@ -4,7 +4,7 @@
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: SABnzbd-4.4.0Alpha2\n"
+"Project-Id-Version: SABnzbd-4.4.0Beta2\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: team@sabnzbd.org\n"
 "Language-Team: SABnzbd <team@sabnzbd.org>\n"

po/nsis/cs.po

@@ -6,7 +6,7 @@
 # 
 msgid ""
 msgstr ""
-"Project-Id-Version: SABnzbd-4.4.0Alpha1\n"
+"Project-Id-Version: SABnzbd-4.4.0Beta1\n"
 "PO-Revision-Date: 2020-06-27 15:56+0000\n"
 "Last-Translator: Pavel C <quoing_transifex@mess.cz>, 2022\n"
 "Language-Team: Czech (https://app.transifex.com/sabnzbd/teams/111101/cs/)\n"

po/nsis/da.po

@@ -6,7 +6,7 @@
 # 
 msgid ""
 msgstr ""
-"Project-Id-Version: SABnzbd-4.4.0Alpha1\n"
+"Project-Id-Version: SABnzbd-4.4.0Beta1\n"
 "PO-Revision-Date: 2020-06-27 15:56+0000\n"
 "Last-Translator: Safihre <safihre@sabnzbd.org>, 2020\n"
 "Language-Team: Danish (https://app.transifex.com/sabnzbd/teams/111101/da/)\n"

po/nsis/de.po

@@ -9,7 +9,7 @@
 # 
 msgid ""
 msgstr ""
-"Project-Id-Version: SABnzbd-4.4.0Alpha1\n"
+"Project-Id-Version: SABnzbd-4.4.0Beta2\n"
 "PO-Revision-Date: 2020-06-27 15:56+0000\n"
 "Last-Translator: Lorenz B, 2024\n"
 "Language-Team: German (https://app.transifex.com/sabnzbd/teams/111101/de/)\n"

po/nsis/es.po

@@ -7,7 +7,7 @@
 # 
 msgid ""
 msgstr ""
-"Project-Id-Version: SABnzbd-4.4.0Alpha1\n"
+"Project-Id-Version: SABnzbd-4.4.0Beta1\n"
 "PO-Revision-Date: 2020-06-27 15:56+0000\n"
 "Last-Translator: Ester Molla Aragones <moarages@gmail.com>, 2020\n"
 "Language-Team: Spanish (https://app.transifex.com/sabnzbd/teams/111101/es/)\n"

po/nsis/fi.po

@@ -6,7 +6,7 @@
 # 
 msgid ""
 msgstr ""
-"Project-Id-Version: SABnzbd-4.4.0Alpha1\n"
+"Project-Id-Version: SABnzbd-4.4.0Beta1\n"
 "PO-Revision-Date: 2020-06-27 15:56+0000\n"
 "Last-Translator: Safihre <safihre@sabnzbd.org>, 2020\n"
 "Language-Team: Finnish (https://app.transifex.com/sabnzbd/teams/111101/fi/)\n"

po/nsis/fr.po

@@ -7,7 +7,7 @@
 # 
 msgid ""
 msgstr ""
-"Project-Id-Version: SABnzbd-4.4.0Alpha1\n"
+"Project-Id-Version: SABnzbd-4.4.0Beta2\n"
 "PO-Revision-Date: 2020-06-27 15:56+0000\n"
 "Last-Translator: Fred L <88com88@gmail.com>, 2024\n"
 "Language-Team: French (https://app.transifex.com/sabnzbd/teams/111101/fr/)\n"

po/nsis/he.po

@@ -7,7 +7,7 @@
 # 
 msgid ""
 msgstr ""
-"Project-Id-Version: SABnzbd-4.4.0Alpha1\n"
+"Project-Id-Version: SABnzbd-4.4.0Beta1\n"
 "PO-Revision-Date: 2020-06-27 15:56+0000\n"
 "Last-Translator: ION, 2024\n"
 "Language-Team: Hebrew (https://app.transifex.com/sabnzbd/teams/111101/he/)\n"

po/nsis/it.po

@@ -3,7 +3,7 @@
 # 
 msgid ""
 msgstr ""
-"Project-Id-Version: SABnzbd-4.4.0Alpha1\n"
+"Project-Id-Version: SABnzbd-4.4.0Beta2\n"
 "PO-Revision-Date: 2020-06-27 15:56+0000\n"
 "Language-Team: Italian (https://app.transifex.com/sabnzbd/teams/111101/it/)\n"
 "MIME-Version: 1.0\n"

po/nsis/nb.po

@@ -6,7 +6,7 @@
 # 
 msgid ""
 msgstr ""
-"Project-Id-Version: SABnzbd-4.4.0Alpha1\n"
+"Project-Id-Version: SABnzbd-4.4.0Beta1\n"
 "PO-Revision-Date: 2020-06-27 15:56+0000\n"
 "Last-Translator: Safihre <safihre@sabnzbd.org>, 2020\n"
 "Language-Team: Norwegian Bokmål (https://app.transifex.com/sabnzbd/teams/111101/nb/)\n"

po/nsis/nl.po

@@ -6,7 +6,7 @@
 # 
 msgid ""
 msgstr ""
-"Project-Id-Version: SABnzbd-4.4.0Alpha1\n"
+"Project-Id-Version: SABnzbd-4.4.0Beta1\n"
 "PO-Revision-Date: 2020-06-27 15:56+0000\n"
 "Last-Translator: Safihre <safihre@sabnzbd.org>, 2024\n"
 "Language-Team: Dutch (https://app.transifex.com/sabnzbd/teams/111101/nl/)\n"

po/nsis/pl.po

@@ -6,7 +6,7 @@
 # 
 msgid ""
 msgstr ""
-"Project-Id-Version: SABnzbd-4.4.0Alpha1\n"
+"Project-Id-Version: SABnzbd-4.4.0Beta1\n"
 "PO-Revision-Date: 2020-06-27 15:56+0000\n"
 "Last-Translator: Safihre <safihre@sabnzbd.org>, 2020\n"
 "Language-Team: Polish (https://app.transifex.com/sabnzbd/teams/111101/pl/)\n"

po/nsis/pt_BR.po

@@ -6,7 +6,7 @@
 # 
 msgid ""
 msgstr ""
-"Project-Id-Version: SABnzbd-4.4.0Alpha1\n"
+"Project-Id-Version: SABnzbd-4.4.0Beta1\n"
 "PO-Revision-Date: 2020-06-27 15:56+0000\n"
 "Last-Translator: Safihre <safihre@sabnzbd.org>, 2020\n"
 "Language-Team: Portuguese (Brazil) (https://app.transifex.com/sabnzbd/teams/111101/pt_BR/)\n"

po/nsis/ro.po

@@ -6,7 +6,7 @@
 # 
 msgid ""
 msgstr ""
-"Project-Id-Version: SABnzbd-4.4.0Alpha1\n"
+"Project-Id-Version: SABnzbd-4.4.0Beta1\n"
 "PO-Revision-Date: 2020-06-27 15:56+0000\n"
 "Last-Translator: Safihre <safihre@sabnzbd.org>, 2020\n"
 "Language-Team: Romanian (https://app.transifex.com/sabnzbd/teams/111101/ro/)\n"

po/nsis/ru.po

@@ -6,7 +6,7 @@
 # 
 msgid ""
 msgstr ""
-"Project-Id-Version: SABnzbd-4.4.0Alpha1\n"
+"Project-Id-Version: SABnzbd-4.4.0Beta1\n"
 "PO-Revision-Date: 2020-06-27 15:56+0000\n"
 "Last-Translator: Safihre <safihre@sabnzbd.org>, 2020\n"
 "Language-Team: Russian (https://app.transifex.com/sabnzbd/teams/111101/ru/)\n"

po/nsis/sr.po

@@ -6,7 +6,7 @@
 # 
 msgid ""
 msgstr ""
-"Project-Id-Version: SABnzbd-4.4.0Alpha1\n"
+"Project-Id-Version: SABnzbd-4.4.0Beta1\n"
 "PO-Revision-Date: 2020-06-27 15:56+0000\n"
 "Last-Translator: Safihre <safihre@sabnzbd.org>, 2020\n"
 "Language-Team: Serbian (https://app.transifex.com/sabnzbd/teams/111101/sr/)\n"

po/nsis/sv.po

@@ -7,7 +7,7 @@
 # 
 msgid ""
 msgstr ""
-"Project-Id-Version: SABnzbd-4.4.0Alpha1\n"
+"Project-Id-Version: SABnzbd-4.4.0Beta1\n"
 "PO-Revision-Date: 2020-06-27 15:56+0000\n"
 "Last-Translator: Petter Ramme, 2024\n"
 "Language-Team: Swedish (https://app.transifex.com/sabnzbd/teams/111101/sv/)\n"

po/nsis/zh_CN.po

@@ -6,7 +6,7 @@
 # 
 msgid ""
 msgstr ""
-"Project-Id-Version: SABnzbd-4.4.0Alpha1\n"
+"Project-Id-Version: SABnzbd-4.4.0Beta1\n"
 "PO-Revision-Date: 2020-06-27 15:56+0000\n"
 "Last-Translator: Safihre <safihre@sabnzbd.org>, 2020\n"
 "Language-Team: Chinese (China) (https://app.transifex.com/sabnzbd/teams/111101/zh_CN/)\n"

requirements.txt

@@ -2,7 +2,7 @@
 # Note that not all sub-dependencies are listed, but only ones we know could cause trouble
 apprise==1.9.0
 sabctools==8.2.5
-CT3==3.3.3.post1
+CT3==3.4.0b6
 cffi==1.17.1
 pycparser==2.22
 feedparser==6.0.11
@@ -31,7 +31,7 @@ rebulk==3.2.0
 
 # Recent cryptography versions require Rust. If you run into issues compiling this
 # SABnzbd will also work with older pre-Rust versions such as cryptography==3.3.2
-cryptography==43.0.1
+cryptography==44.0.0
 
 # We recommend using "orjson" as it is 2x as fast as "ujson". However, it requires
 # Rust so SABnzbd works just as well with "ujson" or the Python built in "json" module
@@ -40,15 +40,15 @@ ujson==5.10.0
 # Windows system integration
 pywin32==308; sys_platform == 'win32'
 windows-toasts==1.3.0; sys_platform == 'win32' and python_version > '3.8'
-winrt-runtime==2.2.0; sys_platform == 'win32' and python_version > '3.8'
-winrt-Windows.Data.Xml.Dom==2.2.0; sys_platform == 'win32' and python_version > '3.8'
-winrt-Windows.Foundation==2.2.0; sys_platform == 'win32' and python_version > '3.8'
-winrt-Windows.Foundation.Collections==2.2.0; sys_platform == 'win32' and python_version > '3.8'
-winrt-Windows.UI.Notifications==2.2.0; sys_platform == 'win32' and python_version > '3.8'
+winrt-runtime==2.3.0; sys_platform == 'win32' and python_version > '3.8'
+winrt-Windows.Data.Xml.Dom==2.3.0; sys_platform == 'win32' and python_version > '3.8'
+winrt-Windows.Foundation==2.3.0; sys_platform == 'win32' and python_version > '3.8'
+winrt-Windows.Foundation.Collections==2.3.0; sys_platform == 'win32' and python_version > '3.8'
+winrt-Windows.UI.Notifications==2.3.0; sys_platform == 'win32' and python_version > '3.8'
 
 # macOS system calls
-pyobjc-core==10.3.1; sys_platform == 'darwin'
-pyobjc-framework-Cocoa==10.3.1; sys_platform == 'darwin'
+pyobjc-core==10.3.2; sys_platform == 'darwin'
+pyobjc-framework-Cocoa==10.3.2; sys_platform == 'darwin'
 
 # Linux notifications
 notify2==0.3.1; sys_platform != 'win32' and sys_platform != 'darwin'
@@ -66,8 +66,10 @@ idna==3.10
 urllib3==2.2.3
 certifi==2024.8.30
 oauthlib==3.2.2
-PyJWT==2.9.0
-blinker==1.8.2
+PyJWT # List version-less for Python 3.8 to just get latest supported
+PyJWT==2.10.1; python_version > '3.8'
+blinker # List version-less for Python 3.8 to just get latest supported
+blinker==1.9.0; python_version > '3.8'
 
 # Optional support for *nix tray icon.
 # Note that pygobject depends on pycairo, which requires pkg-config and cairo headers.

sabnzbd/api.py

@@ -1270,7 +1270,7 @@ def test_nntp_server_dict(kwargs: Dict[str, Union[str, List[str]]]) -> Tuple[boo
     connections = int_conv(kwargs.get("connections", 0))
     timeout = int_conv(kwargs.get("timeout", DEF_NETWORKING_TEST_TIMEOUT))
     ssl = int_conv(kwargs.get("ssl", 0))
-    ssl_verify = int_conv(kwargs.get("ssl_verify", 1))
+    ssl_verify = int_conv(kwargs.get("ssl_verify", 3))
     ssl_ciphers = kwargs.get("ssl_ciphers", "").strip()
 
     if not host:
@@ -1317,15 +1317,39 @@ def test_nntp_server_dict(kwargs: Dict[str, Union[str, List[str]]]) -> Tuple[boo
     # All exceptions are caught internally
     test_server.request_addrinfo_blocking()
     if not test_server.addrinfo:
-        # Try if we can connect on port 80 (so web server), forcing a short timeout
-        test_server.port = 80
-        test_server.timeout = DEF_NETWORKING_TEST_TIMEOUT
-        test_server.request_addrinfo_blocking()
-        if test_server.addrinfo:
+        # so NNTP connection was tried, but did not succeed: no addrinfo. Possible causes:
+        # - user has filled out an indexer as newsserver. Not good.
+        # - user has filled out a weird port on which there is no newsserver
+        # - generic network problem (?)
+        test_server.timeout = DEF_NETWORKING_TEST_TIMEOUT  # force a short timeout
+
+        # let's try well-known ports: HTTP and NTTP(S)
+        port_working = {80: False, 119: False, 563: False}
+        for port_to_check in port_working:
+            # Don't re-check if it was already tried by user
+            if port_to_check != port:
+                test_server.port = port_to_check
+                test_server.request_addrinfo_blocking()
+                port_working[port_to_check] = bool(test_server.addrinfo)
+
+        if not port_working[119] and not port_working[563] and port_working[80]:
+            # That's a webserver, not a newsserver!
             return False, T(
                 "Could not connect to %s on port %s. It appears that %s operates as a web server (port 80), "
                 "possibly an indexer, not a usenet server. You have to fill a usenet server."
             ) % (host, port, host)
+        elif port not in (119, 563):
+            # User specified a weird port, so check if regular ones do work
+            if port_working[563]:
+                return False, T(
+                    "Could not connect to %s on port %s. Use the default usenet settings: port 563 and SSL turned on"
+                ) % (host, port)
+            if port_working[119]:
+                return False, T(
+                    "Could not connect to %s on port %s. Use the default usenet settings: port 119 and SSL turned off"
+                ) % (host, port)
+
+        # Sorry, no clever analysis:
         return False, T('Server address "%s:%s" is not valid.') % (host, port)
 
     try:

sabnzbd/cfg.py

@@ -36,6 +36,8 @@ from sabnzbd.config import (
     OptionStr,
     OptionList,
     create_api_key,
+    get_servers,
+    save_config,
 )
 from sabnzbd.constants import (
     DEF_HOST,
@@ -448,7 +450,7 @@ start_paused = OptionBool("misc", "start_paused", False)
 preserve_paused_state = OptionBool("misc", "preserve_paused_state", False)
 enable_par_cleanup = OptionBool("misc", "enable_par_cleanup", True)
 process_unpacked_par2 = OptionBool("misc", "process_unpacked_par2", True)
-enable_multipar = OptionBool("misc", "enable_multipar", True)
+disable_par2cmdline = OptionBool("misc", "disable_par2cmdline", False)
 enable_unrar = OptionBool("misc", "enable_unrar", True)
 enable_7zip = OptionBool("misc", "enable_7zip", True)
 enable_filejoin = OptionBool("misc", "enable_filejoin", True)
@@ -785,6 +787,32 @@ def config_conversions():
 
     # url_base conversion
     if config_conversion_version() < 2:
-        logging.info("Config conversion set 2")
         # We did not end up applying this conversion, so we skip this conversion_version
-        pass
+        logging.info("Config conversion set 2")
+        config_conversion_version.set(2)
+
+    # Switch to par2cmdline-turbo on Windows
+    if config_conversion_version() < 3:
+        logging.info("Config conversion set 3")
+        if sabnzbd.WIN32 and par_option():
+            # Just empty it, so we don't pass the wrong parameters
+            logging.warning(T("The par2 application was switched, any custom par2 parameters were removed"))
+            par_option.set("")
+
+        # Done
+        config_conversion_version.set(3)
+
+    # Convert Certificate Validation
+    if config_conversion_version() < 4:
+        logging.info("Config conversion set 4")
+
+        all_servers = get_servers()
+        for server in all_servers:
+            if all_servers[server].ssl_verify() == 2:
+                all_servers[server].ssl_verify.set(3)
+
+        # Done
+        config_conversion_version.set(4)
+
+    # Make sure we store the new values
+    save_config()

sabnzbd/config.py

@@ -438,8 +438,8 @@ class ConfigServer:
         self.password = OptionPassword(name, "password", add=False)
         self.connections = OptionNumber(name, "connections", 1, 0, 500, add=False)
         self.ssl = OptionBool(name, "ssl", False, add=False)
-        # 0=No, 1=Normal, 2=Strict (hostname verification)
-        self.ssl_verify = OptionNumber(name, "ssl_verify", 2, add=False)
+        # 0=No, 1=Minimal, 2=Medium, 3=Strict
+        self.ssl_verify = OptionNumber(name, "ssl_verify", 3, add=False)
         self.ssl_ciphers = OptionStr(name, "ssl_ciphers", add=False)
         self.enable = OptionBool(name, "enable", True, add=False)
         self.required = OptionBool(name, "required", False, add=False)

sabnzbd/directunpacker.py

@@ -214,7 +214,7 @@ class DirectUnpacker(threading.Thread):
                         "in the encrypted file",
                         "CRC failed",
                         "checksum failed",
-                        "You need to start extraction from a previous volume",
+                        "not enough space on the disk",
                         "password is incorrect",
                         "Incorrect password",
                         "Write error",

sabnzbd/downloader.py

@@ -490,7 +490,7 @@ class Downloader(Thread):
 
         # Optional and active server had too many problems.
         # Disable it now and send a re-enable plan to the scheduler
-        if server.optional and server.active and (server.bad_cons / server.threads) > 3:
+        if server.optional and server.active and (server.threads < 1 or (server.bad_cons / server.threads) > 3):
             # Deactivate server
             server.bad_cons = 0
             server.deactivate()

sabnzbd/happyeyeballs.py

@@ -70,10 +70,12 @@ class AddrInfo:
     canonname: str
     sockaddr: Union[Tuple[str, int], Tuple[str, int, int, int]]
     ipaddress: str = ""
+    port: int = 0
 
     def __post_init__(self):
         # For easy access
         self.ipaddress = self.sockaddr[0]
+        self.port = self.sockaddr[1]
 
 
 def family_type(family) -> str:
@@ -98,16 +100,18 @@ def do_socket_connect(result_queue: queue.Queue, addrinfo: AddrInfo, timeout: in
             s.connect(addrinfo.sockaddr)
             result_queue.put(addrinfo)
             logging.debug(
-                "Happy Eyeballs connected to %s (%s) in %dms",
+                "Happy Eyeballs connected to %s (%s, port=%d) in %dms",
                 addrinfo.ipaddress,
                 addrinfo.canonname,
+                addrinfo.port,
                 1000 * (time.time() - start),
             )
         except socket.error:
             logging.debug(
-                "Happy Eyeballs failed to connect to %s (%s) in %dms",
+                "Happy Eyeballs failed to connect to %s (%s, port=%d) in %dms",
                 addrinfo.ipaddress,
                 addrinfo.canonname,
+                addrinfo.port,
                 1000 * (time.time() - start),
             )
         finally:

sabnzbd/interface.py

@@ -843,7 +843,7 @@ SPECIAL_BOOL_LIST = (
     "api_warnings",
     "helpful_warnings",
     "ampm",
-    "enable_multipar",
+    "disable_par2cmdline",
     "enable_unrar",
     "enable_7zip",
     "enable_filejoin",

sabnzbd/internetspeed.py

@@ -77,10 +77,15 @@ def internetspeed_worker(secure_sock: ssl.SSLSocket, socket_speed: Dict[ssl.SSLS
 
 def internetspeed_interal(family: int = socket.AF_UNSPEC) -> float:
     """Measure internet speed from a test-download using our optimized SSL-code"""
-
     context = ssl.create_default_context(ssl.Purpose.SERVER_AUTH)
     socket_speed = {}
 
+    # Allow those pesky virus-scanners to inject their scanning certificates
+    # This is enabled by default because it's just a speedtest anyway
+    if hasattr(ssl, "VERIFY_X509_PARTIAL_CHAIN"):
+        context.verify_flags &= ~ssl.VERIFY_X509_PARTIAL_CHAIN
+        context.verify_flags &= ~ssl.VERIFY_X509_STRICT
+
     try:
         if not (addrinfo := happyeyeballs(TEST_HOSTNAME, TEST_PORT, DEF_NETWORKING_SHORT_TIMEOUT, family)):
             # no addrinfo from happyeyeballs, so no connection was possible

sabnzbd/newsunpack.py

@@ -734,6 +734,7 @@ def rar_extract_core(
     extracted = []
     rarfiles = []
     fail = 0
+    requires_kill = False
     inrecovery = False
     lines = []
 
@@ -789,6 +790,14 @@ def rar_extract_core(
             nzo.set_unpack_info("Unpack", msg, setname)
             fail = 1
 
+        elif line.startswith("There is not enough space on the disk"):
+            msg = T("Unpacking failed, disk full")
+            nzo.fail_msg = msg
+            nzo.set_unpack_info("Unpack", msg, setname)
+            fail = 1
+            # After this is a line that requires user input ([R]etry, [A]bort), which hangs, so we need a kill
+            requires_kill = True
+
         elif line.startswith("Cannot create"):
             line2 = p.stdout.readline()
             if "must not exceed 260" in line2:
@@ -799,7 +808,7 @@ def rar_extract_core(
             nzo.set_unpack_info("Unpack", msg, setname)
             fail = 1
             # Kill the process (can stay in endless loop on Windows Server)
-            p.kill()
+            requires_kill = True
 
         elif line.startswith("ERROR: "):
             nzo.fail_msg = line
@@ -844,9 +853,10 @@ def rar_extract_core(
             extracted.append(real_path(extraction_path, unpacked_file))
 
         if fail:
-            if p.stdout:
-                p.stdout.close()
-            p.wait()
+            if requires_kill:
+                p.kill()
+            else:
+                p.wait()
             logging.debug("UNRAR output: \n%s", "\n".join(lines))
             return fail, [], []
 
@@ -1059,7 +1069,7 @@ def par2_repair(nzo: NzbObject, setname: str) -> Tuple[bool, bool]:
             joinables, _, _, _ = build_filelists(nzo.download_path, check_rar=False)
 
             # Multipar on Windows, par2cmdline on the other platforms
-            if cfg.enable_multipar() and sabnzbd.WIN32:
+            if cfg.disable_par2cmdline() and sabnzbd.WIN32:
                 finished, readd, used_joinables, used_for_repair = multipar_verify(parfile, nzo, setname, joinables)
             else:
                 finished, readd, used_joinables, used_for_repair = par2cmdline_verify(parfile, nzo, setname, joinables)
@@ -1150,13 +1160,7 @@ def par2cmdline_verify(
     else:
         # Normal case, everything is named after set
         wildcard = setname + "*"
-
-    if sabnzbd.MACOS or sabnzbd.WIN32:
-        command.append(os.path.join(parfolder, wildcard))
-    else:
-        # For Unix systems, remove folders, due to bug in some par2cmdline versions
-        flist = [item for item in globber_full(parfolder, wildcard) if os.path.isfile(item)]
-        command.extend(flist)
+    command.append(os.path.join(parfolder, wildcard))
 
     # We need to check for the bad par2cmdline that skips blocks
     # Or the one that complains about basepath

sabnzbd/newswrapper.py

@@ -283,14 +283,29 @@ class NNTP:
         # Create SSL-context if it is needed and not created yet
         if self.nw.server.ssl and not self.nw.server.ssl_context:
             # Setup the SSL socket
+            # Set Certificate validation: 0=Disabled, 1=Minimal, 2=Medium, 3=Strict
             self.nw.server.ssl_context = ssl.create_default_context(ssl.Purpose.SERVER_AUTH)
 
-            # Only verify hostname when we're strict
-            if self.nw.server.ssl_verify < 2:
+            # Allow those pesky virus-scanners to inject their scanning certificates
+            if self.nw.server.ssl_verify <= 2:
+                self.nw.server.ssl_context.verify_flags &= ~ssl.VERIFY_X509_STRICT
+                # This flag is only available for Python 3.10 and above
+                if hasattr(ssl, "VERIFY_X509_PARTIAL_CHAIN"):
+                    self.nw.server.ssl_context.verify_flags &= ~ssl.VERIFY_X509_PARTIAL_CHAIN
+            else:
+                # Make sure it's enabled for Strict mode, also pre-3.13
+                self.nw.server.ssl_context.verify_flags |= ssl.VERIFY_X509_STRICT
+                # This flag is only available for Python 3.10 and above
+                if hasattr(ssl, "VERIFY_X509_PARTIAL_CHAIN"):
+                    self.nw.server.ssl_context.verify_flags |= ssl.VERIFY_X509_PARTIAL_CHAIN
+
+            # Only verify hostname when Medium or Strict
+            if self.nw.server.ssl_verify <= 1:
                 self.nw.server.ssl_context.check_hostname = False
-                # Certificates optional
-                if self.nw.server.ssl_verify == 0:
-                    self.nw.server.ssl_context.verify_mode = ssl.CERT_NONE
+
+            # Certificates optional
+            if self.nw.server.ssl_verify <= 0:
+                self.nw.server.ssl_context.verify_mode = ssl.CERT_NONE
 
             # Did the user set a custom cipher-string?
             if self.nw.server.ssl_ciphers:
@@ -370,7 +385,9 @@ class NNTP:
                     "Certificate hostname mismatch: the server hostname is not listed in the certificate. This is a server issue."
                 )
             elif "certificate verify failed" in raw_error_str:
-                raw_error_str = T("Certificate not valid. This is most probably a server issue.")
+                raw_error_str = T(
+                    "Certificate could not be validated. This could be a server issue or due to a locally injected certificate (for example by firewall or virus scanner). Try setting Certificate verification to Medium."
+                )
 
             # Reformat error and overwrite str-representation
             error_str = T("Server %s uses an untrusted certificate [%s]") % (self.nw.server.host, raw_error_str)

sabnzbd/nzbstuff.py

@@ -1223,7 +1223,7 @@ class NzbObject(TryList):
         # Abort the job due to failure
         if not job_can_succeed:
             self.fail_msg = T("Aborted, cannot be completed") + " - https://sabnzbd.org/not-complete"
-            self.set_unpack_info("Download", self.fail_msg, unique=False)
+            self.set_unpack_info("Download", self.fail_msg)
             logging.debug('Abort job "%s", due to impossibility to complete it', self.final_name)
             return True, True, True
 

sabnzbd/skintext.py

@@ -550,10 +550,15 @@ SKIN_TEXT = {
     "explain-ssl": TT("Secure connection to server"),  #: Server SSL tickbox
     "opt-ssl_verify": TT("Certificate verification"),
     "explain-ssl_verify": TT(
-        "Minimal: when SSL is enabled, verify the identity of the server using its certificates. Strict: verify and enforce matching hostname."
+        "When SSL is enabled: "
+        "- Strict: enforce full certificate verification. This is the most secure setting. "
+        "- Medium: verify that the certificate is valid and matches the server address, but allow certificates locally injected (for example by firewall or virus scanner)."
+        "- Minimal: verify that the certificate is valid. This is not secure, any valid certificate could be used. "
+        "- Disabled: no certification verification. This is not secure at all, anyone could intercept your connection. "
     ),
     "ssl_verify-disabled": TT("Disabled"),
-    "ssl_verify-normal": TT("Minimal"),
+    "ssl_verify-minimal": TT("Minimal"),
+    "ssl_verify-medium": TT("Medium"),
     "ssl_verify-strict": TT("Strict"),
     "srv-priority": TT("Priority"),  #: Server priority
     "explain-svrprio": TT("0 is highest priority, 100 is the lowest priority"),  #: Explain server priority

sabnzbd/version.py

@@ -6,5 +6,5 @@
 # You MUST use double quotes (so " and not ')
 # Do not forget to update the appdata file for every major release!
 
-__version__ = "4.4.0Alpha2"
+__version__ = "4.4.1"
 __baseline__ = "unknown"

tests/requirements.txt

@@ -1,5 +1,5 @@
 # Testing requirements
-pytest==7.4.4
+pytest
 setuptools
 selenium
 requests

tests/test_newsunpack.py

@@ -175,7 +175,7 @@ class TestPar2Repair:
             ]
         )
 
-        if sabnzbd.WIN32 and cfg.enable_multipar():
+        if sabnzbd.WIN32 and cfg.disable_par2cmdline():
             # Multipar output status updates
             nzo.set_action_line.assert_has_calls(
                 [
@@ -238,7 +238,7 @@ class TestPar2Repair:
         # There are no renames in case of filejoin by par2repair!
         nzo.renamed_file.assert_not_called()
 
-        if sabnzbd.WIN32 and cfg.enable_multipar():
+        if sabnzbd.WIN32 and cfg.disable_par2cmdline():
             # Multipar output status updates, which is limited because Multipar doesn't say much..
             nzo.set_action_line.assert_has_calls(
                 [
@@ -301,7 +301,7 @@ class TestPar2Repair:
         # All joinable files should be removed
         assert dir_contents == ["__ADMIN__", "par2test.bin"]
 
-        if sabnzbd.WIN32 and cfg.enable_multipar():
+        if sabnzbd.WIN32 and cfg.disable_par2cmdline():
             # Multipar output status updates, which is limited because Multipar doesn't say much..
             nzo.set_action_line.assert_has_calls(
                 [