gui: Don't set default path editing existing folders without label (fixes #4297)

GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4298
LGTM: calmh

AUTHORS

@@ -62,15 +62,17 @@ Jaya Chithra (jayachithra) <s.k.jayachithra@gmail.com>
 Jens Diemer (jedie) <github.com@jensdiemer.de> <git@jensdiemer.de>
 Jochen Voss (seehuhn) <voss@seehuhn.de>
 Johan Vromans (sciurius) <jvromans@squirrel.nl>
+Jose Manuel Delicado (jmdaweb) <jmdaweb@hotmail.com> <jmdaweb@users.noreply.github.com>
 Karol Różycki (krozycki) <rozycki.karol@gmail.com>
 Kelong Cong (kc1212) <kc04bc@gmx.com> <kc1212@users.noreply.github.com>
 Ken'ichi Kamada (kamadak) <kamada@nanohz.org>
 Kevin Allen (ironmig) <kma1660@gmail.com>
 Kevin White, Jr. (kwhite17) <kevinwhite1710@gmail.com>
-Kurt Fitzner (Kudalufi) <kurt@va1der.ca>
+Kurt Fitzner (Kudalufi) <kurt@va1der.ca> <kurt.fitzner@gmail.com>
 Lars K.W. Gohlke (lkwg82) <lkwg82@gmx.de>
 Laurent Etiemble (letiemble) <laurent.etiemble@gmail.com> <laurent.etiemble@monobjc.net>
 Leo Arias (elopio) <yo@elopio.net>
+Liu Siyuan (liusy182) <liusy182@gmail.com> <liusy182@hotmail.com>
 Lode Hoste (Zillode) <zillode@zillode.be>
 Lord Landon Agahnim (LordLandon) <lordlandon@gmail.com>
 Majed Abdulaziz (majedev) <majed.alhajry@gmail.com>
@@ -93,6 +95,7 @@ Phill Luby (pluby) <phill.luby@newredo.com>
 Piotr Bejda (piobpl) <piotrb10@gmail.com>
 Robert Carosi (nov1n) <robert@carosi.nl>
 Roman Zaynetdinov (zaynetro) <romanznet@gmail.com>
+Ross Smith II (rasa) <ross@smithii.com>
 Ryan Sullivan (KayoticSully) <kayoticsully@gmail.com>
 Sacheendra Talluri (sacheendra) <sacheendra.t@gmail.com>
 Scott Klupfel (kluppy) <kluppy@going2blue.com>
@@ -100,6 +103,7 @@ Sergey Mishin (ralder) <ralder@yandex.ru>
 Simon Frei (imsodin) <freisim93@gmail.com>
 Stefan Kuntz (Stefan-Code) <stefan.github@gmail.com> <Stefan.github@gmail.com>
 Stefan Tatschner (rumpelsepp) <stefan@sevenbyte.org> <rumpelsepp@sevenbyte.org>
+Suhas Gundimeda (snugghash) <suhas.gundimeda@gmail.com> <snugghash@gmail.com>
 Tim Abell (timabell) <tim@timwise.co.uk>
 Tim Howes (timhowes) <timhowes@berkeley.edu>
 Tobias Nygren (tnn2) <tnn@nygren.pp.se>
@@ -111,6 +115,6 @@ Veeti Paananen (veeti) <veeti.paananen@rojekti.fi>
 Victor Buinsky (buinsky) <vix_booja@tut.by>
 Vil Brekin (Vilbrekin) <vilbrekin@gmail.com>
 William A. Kennington III (wkennington) <william@wkennington.com>
-Wulf Weich (wweich) <wweich@users.noreply.github.com> <wweich@gmx.de>
+Wulf Weich (wweich) <wweich@users.noreply.github.com> <wweich@gmx.de> <wulf@weich-kr.de>
 Xavier O. (damajor) <damajor@gmail.com>
 Yannic A. (eipiminus1) <eipiminusone+github@gmail.com> <eipiminus1@users.noreply.github.com>

NICKS

@@ -57,6 +57,8 @@ jayachithra <s.k.jayachithra@gmail.com>
 jedie <github.com@jensdiemer.de>
 jedie <git@jensdiemer.de>
 jgke <jgke@jgke.fi>
+jmdaweb <jmdaweb@hotmail.com>
+jmdaweb <jmdaweb@users.noreply.github.com>
 jpjp <jamespatterson@operamail.com>
 jpjp <jpjp@users.noreply.github.com>
 kamadak <kamada@nanohz.org>
@@ -70,9 +72,12 @@ kralo <max.schulze@online.de>
 kralo <kralo@users.noreply.github.com>
 krozycki <rozycki.karol@gmail.com>
 Kudalufi <kurt@va1der.ca>
+Kudalufi <kurt.fitzner@gmail.com>
 kwhite17 <kevinwhite1710@gmail.com>
 letiemble <laurent.etiemble@gmail.com>
 letiemble <laurent.etiemble@monobjc.net>
+liusy182 <liusy182@gmail.com>
+liusy182 <liusy182@hotmail.com>
 lkwg82 <lkwg82@gmx.de>
 LordLandon <lordlandon@gmail.com>
 majedev <majed.alhajry@gmail.com>
@@ -106,6 +111,7 @@ ProactiveServices <ProactiveServices@users.noreply.github.com>
 pyfisch <pyfisch@gmail.com>
 qbit <qbit@deftly.net>
 ralder <ralder@yandex.ru>
+rasa <ross@smithii.com>
 Rewt0r <rewt0r@gmx.com>
 Rewt0r <Rewt0r@users.noreply.github.com>
 rumpelsepp <stefan@sevenbyte.org>
@@ -116,6 +122,8 @@ sciurius <jvromans@squirrel.nl>
 seehuhn <voss@seehuhn.de>
 Smiley73 <heiko@zuerker.org>
 snnd <dw@risu.io>
+snugghash <suhas.gundimeda@gmail.com>
+snugghash <snugghash@gmail.com>
 Stefan-Code <stefan.github@gmail.com>
 Stefan-Code <Stefan.github@gmail.com>
 timabell <tim@timwise.co.uk>
@@ -134,6 +142,7 @@ wkennington <william@wkennington.com>
 WSGCSysadmin <e.meitner@willystreet.coop>
 wweich <wweich@users.noreply.github.com>
 wweich <wweich@gmx.de>
+wweich <wulf@weich-kr.de>
 xduugu <cedric@gmx.ca>
 zaynetro <romanznet@gmail.com>
 Zillode <zillode@zillode.be>

README.md

@@ -100,7 +100,7 @@ All code is licensed under the [MPLv2 License][7].
 [1]: https://docs.syncthing.net/specs/bep-v1.html
 [2]: https://docs.syncthing.net/intro/getting-started.html
 [3]: https://github.com/syncthing/syncthing/blob/master/etc
-[4]: http://www.freenode.net/
+[4]: https://www.freenode.net/
 [5]: https://docs.syncthing.net/dev/building.html
 [6]: https://docs.syncthing.net/
 [7]: https://github.com/syncthing/syncthing/blob/master/LICENSE

build.go

@@ -12,7 +12,9 @@ import (
 	"archive/tar"
 	"archive/zip"
 	"bytes"
+	"compress/flate"
 	"compress/gzip"
+	"crypto/sha256"
 	"errors"
 	"flag"
 	"fmt"
@@ -32,18 +34,25 @@ import (
 )
 
 var (
-	versionRe = regexp.MustCompile(`-[0-9]{1,3}-g[0-9a-f]{5,10}`)
-	goarch    string
-	goos      string
-	noupgrade bool
-	version   string
-	goVersion float64
-	race      bool
-	debug     = os.Getenv("BUILDDEBUG") != ""
+	versionRe     = regexp.MustCompile(`-[0-9]{1,3}-g[0-9a-f]{5,10}`)
+	goarch        string
+	goos          string
+	noupgrade     bool
+	version       string
+	goVersion     float64
+	race          bool
+	debug         = os.Getenv("BUILDDEBUG") != ""
+	noBuildGopath bool
+	extraTags     string
+	installSuffix string
 )
 
 type target struct {
 	name              string
+	debname           string
+	debdeps           []string
+	debpost           string
+	description       string
 	buildPkg          string
 	binaryName        string
 	archiveFiles      []archiveFile
@@ -61,14 +70,18 @@ var targets = map[string]target{
 	"all": {
 		// Only valid for the "build" and "install" commands as it lacks all
 		// the archive creation stuff.
-		buildPkg: "./cmd/...",
+		buildPkg: "github.com/syncthing/syncthing/cmd/...",
 		tags:     []string{"purego"},
 	},
 	"syncthing": {
 		// The default target for "build", "install", "tar", "zip", "deb", etc.
-		name:       "syncthing",
-		buildPkg:   "./cmd/syncthing",
-		binaryName: "syncthing", // .exe will be added automatically for Windows builds
+		name:        "syncthing",
+		debname:     "syncthing",
+		debdeps:     []string{"libc6", "procps"},
+		debpost:     "script/post-upgrade",
+		description: "Open Source Continuous File Synchronization",
+		buildPkg:    "github.com/syncthing/syncthing/cmd/syncthing",
+		binaryName:  "syncthing", // .exe will be added automatically for Windows builds
 		archiveFiles: []archiveFile{
 			{src: "{{binary}}", dst: "{{binary}}", perm: 0755},
 			{src: "README.md", dst: "README.txt", perm: 0644},
@@ -98,9 +111,12 @@ var targets = map[string]target{
 		},
 	},
 	"stdiscosrv": {
-		name:       "stdiscosrv",
-		buildPkg:   "./cmd/stdiscosrv",
-		binaryName: "stdiscosrv", // .exe will be added automatically for Windows builds
+		name:        "stdiscosrv",
+		debname:     "syncthing-discosrv",
+		debdeps:     []string{"libc6"},
+		description: "Syncthing Discovery Server",
+		buildPkg:    "github.com/syncthing/syncthing/cmd/stdiscosrv",
+		binaryName:  "stdiscosrv", // .exe will be added automatically for Windows builds
 		archiveFiles: []archiveFile{
 			{src: "{{binary}}", dst: "{{binary}}", perm: 0755},
 			{src: "cmd/stdiscosrv/README.md", dst: "README.txt", perm: 0644},
@@ -109,17 +125,20 @@ var targets = map[string]target{
 		},
 		installationFiles: []archiveFile{
 			{src: "{{binary}}", dst: "deb/usr/bin/{{binary}}", perm: 0755},
-			{src: "cmd/stdiscosrv/README.md", dst: "deb/usr/share/doc/stdiscosrv/README.txt", perm: 0644},
-			{src: "cmd/stdiscosrv/LICENSE", dst: "deb/usr/share/doc/stdiscosrv/LICENSE.txt", perm: 0644},
-			{src: "AUTHORS", dst: "deb/usr/share/doc/stdiscosrv/AUTHORS.txt", perm: 0644},
+			{src: "cmd/stdiscosrv/README.md", dst: "deb/usr/share/doc/syncthing-discosrv/README.txt", perm: 0644},
+			{src: "cmd/stdiscosrv/LICENSE", dst: "deb/usr/share/doc/syncthing-discosrv/LICENSE.txt", perm: 0644},
+			{src: "AUTHORS", dst: "deb/usr/share/doc/syncthing-discosrv/AUTHORS.txt", perm: 0644},
 			{src: "man/stdiscosrv.1", dst: "deb/usr/share/man/man1/stdiscosrv.1", perm: 0644},
 		},
 		tags: []string{"purego"},
 	},
 	"strelaysrv": {
-		name:       "strelaysrv",
-		buildPkg:   "./cmd/strelaysrv",
-		binaryName: "strelaysrv", // .exe will be added automatically for Windows builds
+		name:        "strelaysrv",
+		debname:     "syncthing-relaysrv",
+		debdeps:     []string{"libc6"},
+		description: "Syncthing Relay Server",
+		buildPkg:    "github.com/syncthing/syncthing/cmd/strelaysrv",
+		binaryName:  "strelaysrv", // .exe will be added automatically for Windows builds
 		archiveFiles: []archiveFile{
 			{src: "{{binary}}", dst: "{{binary}}", perm: 0755},
 			{src: "cmd/strelaysrv/README.md", dst: "README.txt", perm: 0644},
@@ -128,16 +147,19 @@ var targets = map[string]target{
 		},
 		installationFiles: []archiveFile{
 			{src: "{{binary}}", dst: "deb/usr/bin/{{binary}}", perm: 0755},
-			{src: "cmd/strelaysrv/README.md", dst: "deb/usr/share/doc/strelaysrv/README.txt", perm: 0644},
-			{src: "cmd/strelaysrv/LICENSE", dst: "deb/usr/share/doc/strelaysrv/LICENSE.txt", perm: 0644},
-			{src: "AUTHORS", dst: "deb/usr/share/doc/strelaysrv/AUTHORS.txt", perm: 0644},
+			{src: "cmd/strelaysrv/README.md", dst: "deb/usr/share/doc/syncthing-relaysrv/README.txt", perm: 0644},
+			{src: "cmd/strelaysrv/LICENSE", dst: "deb/usr/share/doc/syncthing-relaysrv/LICENSE.txt", perm: 0644},
+			{src: "AUTHORS", dst: "deb/usr/share/doc/syncthing-relaysrv/AUTHORS.txt", perm: 0644},
 			{src: "man/strelaysrv.1", dst: "deb/usr/share/man/man1/strelaysrv.1", perm: 0644},
 		},
 	},
 	"strelaypoolsrv": {
-		name:       "strelaypoolsrv",
-		buildPkg:   "./cmd/strelaypoolsrv",
-		binaryName: "strelaypoolsrv", // .exe will be added automatically for Windows builds
+		name:        "strelaypoolsrv",
+		debname:     "syncthing-relaypoolsrv",
+		debdeps:     []string{"libc6"},
+		description: "Syncthing Relay Pool Server",
+		buildPkg:    "github.com/syncthing/syncthing/cmd/strelaypoolsrv",
+		binaryName:  "strelaypoolsrv", // .exe will be added automatically for Windows builds
 		archiveFiles: []archiveFile{
 			{src: "{{binary}}", dst: "{{binary}}", perm: 0755},
 			{src: "cmd/strelaypoolsrv/README.md", dst: "README.txt", perm: 0644},
@@ -146,48 +168,13 @@ var targets = map[string]target{
 		},
 		installationFiles: []archiveFile{
 			{src: "{{binary}}", dst: "deb/usr/bin/{{binary}}", perm: 0755},
-			{src: "cmd/strelaypoolsrv/README.md", dst: "deb/usr/share/doc/relaysrv/README.txt", perm: 0644},
-			{src: "cmd/strelaypoolsrv/LICENSE", dst: "deb/usr/share/doc/relaysrv/LICENSE.txt", perm: 0644},
-			{src: "AUTHORS", dst: "deb/usr/share/doc/relaysrv/AUTHORS.txt", perm: 0644},
+			{src: "cmd/strelaypoolsrv/README.md", dst: "deb/usr/share/doc/syncthing-relaypoolsrv/README.txt", perm: 0644},
+			{src: "cmd/strelaypoolsrv/LICENSE", dst: "deb/usr/share/doc/syncthing-relaypoolsrv/LICENSE.txt", perm: 0644},
+			{src: "AUTHORS", dst: "deb/usr/share/doc/syncthing-relaypoolsrv/AUTHORS.txt", perm: 0644},
 		},
 	},
 }
 
-var (
-	// fast linters complete in a fraction of a second and might as well be
-	// run always as part of the build
-	fastLinters = []string{
-		"deadcode",
-		"golint",
-		"ineffassign",
-		"vet",
-	}
-
-	// slow linters take several seconds and are run only as part of the
-	// "metalint" command.
-	slowLinters = []string{
-		"gosimple",
-		"staticcheck",
-		"structcheck",
-		"unused",
-		"varcheck",
-	}
-
-	// Which parts of the tree to lint
-	lintDirs = []string{".", "./lib/...", "./cmd/..."}
-
-	// Messages to ignore
-	lintExcludes = []string{
-		".pb.go",
-		"should have comment",
-		"protocol.Vector composite literal uses unkeyed fields",
-		"cli.Requires composite literal uses unkeyed fields",
-		"Use DialContext instead",   // Go 1.7
-		"os.SEEK_SET is deprecated", // Go 1.7
-		"SA4017",                    // staticcheck "is a pure function but its return value is ignored"
-	}
-)
-
 func init() {
 	// The "syncthing" target includes a few more files found in the "etc"
 	// and "extra" dirs.
@@ -205,9 +192,10 @@ func init() {
 }
 
 func main() {
-	log.SetOutput(os.Stdout)
 	log.SetFlags(0)
 
+	parseFlags()
+
 	if debug {
 		t0 := time.Now()
 		defer func() {
@@ -215,16 +203,25 @@ func main() {
 		}()
 	}
 
-	if os.Getenv("GOPATH") == "" {
-		setGoPath()
+	if gopath() == "" {
+		gopath, err := temporaryBuildDir()
+		if err != nil {
+			log.Fatal(err)
+		}
+		if !noBuildGopath {
+			lazyRebuildAssets()
+			if err := buildGOPATH(gopath); err != nil {
+				log.Fatal(err)
+			}
+		}
+		os.Setenv("GOPATH", gopath)
+		log.Println("GOPATH is", gopath)
 	}
 
 	// Set path to $GOPATH/bin:$PATH so that we can for sure find tools we
 	// might have installed during "build.go setup".
 	os.Setenv("PATH", fmt.Sprintf("%s%cbin%c%s", os.Getenv("GOPATH"), os.PathSeparator, os.PathListSeparator, os.Getenv("PATH")))
 
-	parseFlags()
-
 	checkArchitecture()
 
 	// Invoking build.go with no parameters at all builds everything (incrementally),
@@ -267,22 +264,23 @@ func runCommand(cmd string, target target) {
 		if noupgrade {
 			tags = []string{"noupgrade"}
 		}
+		tags = append(tags, strings.Fields(extraTags)...)
 		install(target, tags)
-		metalint(fastLinters, lintDirs)
+		metalintShort()
 
 	case "build":
 		var tags []string
 		if noupgrade {
 			tags = []string{"noupgrade"}
 		}
+		tags = append(tags, strings.Fields(extraTags)...)
 		build(target, tags)
-		metalint(fastLinters, lintDirs)
 
 	case "test":
-		test("./lib/...", "./cmd/...")
+		test("github.com/syncthing/syncthing/lib/...", "github.com/syncthing/syncthing/cmd/...")
 
 	case "bench":
-		bench("./lib/...", "./cmd/...")
+		bench("github.com/syncthing/syncthing/lib/...", "github.com/syncthing/syncthing/cmd/...")
 
 	case "assets":
 		rebuildAssets()
@@ -312,41 +310,38 @@ func runCommand(cmd string, target target) {
 		clean()
 
 	case "vet":
-		metalint(fastLinters, lintDirs)
+		metalintShort()
 
 	case "lint":
-		metalint(fastLinters, lintDirs)
+		metalintShort()
 
 	case "metalint":
-		metalint(fastLinters, lintDirs)
-		metalint(slowLinters, lintDirs)
+		metalint()
 
 	case "version":
 		fmt.Println(getVersion())
 
+	case "gopath":
+		gopath, err := temporaryBuildDir()
+		if err != nil {
+			log.Fatal(err)
+		}
+		fmt.Println(gopath)
+
 	default:
 		log.Fatalf("Unknown command %q", cmd)
 	}
 }
 
-// setGoPath sets GOPATH correctly with the assumption that we are
-// in $GOPATH/src/github.com/syncthing/syncthing.
-func setGoPath() {
-	cwd, err := os.Getwd()
-	if err != nil {
-		log.Fatal(err)
-	}
-	gopath := filepath.Clean(filepath.Join(cwd, "../../../../"))
-	log.Println("GOPATH is", gopath)
-	os.Setenv("GOPATH", gopath)
-}
-
 func parseFlags() {
 	flag.StringVar(&goarch, "goarch", runtime.GOARCH, "GOARCH")
 	flag.StringVar(&goos, "goos", runtime.GOOS, "GOOS")
 	flag.BoolVar(&noupgrade, "no-upgrade", noupgrade, "Disable upgrade functionality")
 	flag.StringVar(&version, "version", getVersion(), "Set compiled in version string")
 	flag.BoolVar(&race, "race", race, "Use race detector")
+	flag.BoolVar(&noBuildGopath, "no-build-gopath", noBuildGopath, "Don't build GOPATH, assume it's OK")
+	flag.StringVar(&extraTags, "tags", extraTags, "Extra tags, space separated")
+	flag.StringVar(&installSuffix, "installsuffix", installSuffix, "Install suffix, optional")
 	flag.Parse()
 }
 
@@ -373,7 +368,7 @@ func setup() {
 		runPrint("go", "get", "-u", pkg)
 	}
 
-	runPrint("go", "install", "-v", "./vendor/github.com/gogo/protobuf/protoc-gen-gogofast")
+	runPrint("go", "install", "-v", "github.com/syncthing/syncthing/vendor/github.com/gogo/protobuf/protoc-gen-gogofast")
 }
 
 func test(pkgs ...string) {
@@ -412,6 +407,9 @@ func install(target target, tags []string) {
 	if len(tags) > 0 {
 		args = append(args, "-tags", strings.Join(tags, " "))
 	}
+	if installSuffix != "" {
+		args = append(args, "-installsuffix", installSuffix)
+	}
 	if race {
 		args = append(args, "-race")
 	}
@@ -427,11 +425,14 @@ func build(target target, tags []string) {
 
 	tags = append(target.tags, tags...)
 
-	rmr(target.binaryName)
+	rmr(target.BinaryName())
 	args := []string{"build", "-i", "-v", "-ldflags", ldflags()}
 	if len(tags) > 0 {
 		args = append(args, "-tags", strings.Join(tags, " "))
 	}
+	if installSuffix != "" {
+		args = append(args, "-installsuffix", installSuffix)
+	}
 	if race {
 		args = append(args, "-race")
 	}
@@ -455,22 +456,20 @@ func buildTar(target target) {
 	build(target, tags)
 
 	if goos == "darwin" {
-		macosCodesign(target.binaryName)
+		macosCodesign(target.BinaryName())
 	}
 
 	for i := range target.archiveFiles {
-		target.archiveFiles[i].src = strings.Replace(target.archiveFiles[i].src, "{{binary}}", target.binaryName, 1)
-		target.archiveFiles[i].dst = strings.Replace(target.archiveFiles[i].dst, "{{binary}}", target.binaryName, 1)
+		target.archiveFiles[i].src = strings.Replace(target.archiveFiles[i].src, "{{binary}}", target.BinaryName(), 1)
+		target.archiveFiles[i].dst = strings.Replace(target.archiveFiles[i].dst, "{{binary}}", target.BinaryName(), 1)
 		target.archiveFiles[i].dst = name + "/" + target.archiveFiles[i].dst
 	}
 
 	tarGz(filename, target.archiveFiles)
-	log.Println(filename)
+	fmt.Println(filename)
 }
 
 func buildZip(target target) {
-	target.binaryName += ".exe"
-
 	name := archiveName(target)
 	filename := name + ".zip"
 
@@ -483,13 +482,13 @@ func buildZip(target target) {
 	build(target, tags)
 
 	for i := range target.archiveFiles {
-		target.archiveFiles[i].src = strings.Replace(target.archiveFiles[i].src, "{{binary}}", target.binaryName, 1)
-		target.archiveFiles[i].dst = strings.Replace(target.archiveFiles[i].dst, "{{binary}}", target.binaryName, 1)
+		target.archiveFiles[i].src = strings.Replace(target.archiveFiles[i].src, "{{binary}}", target.BinaryName(), 1)
+		target.archiveFiles[i].dst = strings.Replace(target.archiveFiles[i].dst, "{{binary}}", target.BinaryName(), 1)
 		target.archiveFiles[i].dst = name + "/" + target.archiveFiles[i].dst
 	}
 
 	zipFile(filename, target.archiveFiles)
-	log.Println(filename)
+	fmt.Println(filename)
 }
 
 func buildDeb(target target) {
@@ -509,8 +508,8 @@ func buildDeb(target target) {
 	build(target, []string{"noupgrade"})
 
 	for i := range target.installationFiles {
-		target.installationFiles[i].src = strings.Replace(target.installationFiles[i].src, "{{binary}}", target.binaryName, 1)
-		target.installationFiles[i].dst = strings.Replace(target.installationFiles[i].dst, "{{binary}}", target.binaryName, 1)
+		target.installationFiles[i].src = strings.Replace(target.installationFiles[i].src, "{{binary}}", target.BinaryName(), 1)
+		target.installationFiles[i].dst = strings.Replace(target.installationFiles[i].dst, "{{binary}}", target.BinaryName(), 1)
 	}
 
 	for _, af := range target.installationFiles {
@@ -528,15 +527,26 @@ func buildDeb(target target) {
 		// than just 0.14.26. This rectifies that.
 		debver = strings.Replace(debver, "-", "~", -1)
 	}
-	runPrint("fpm", "-t", "deb", "-s", "dir", "-C", "deb",
-		"-n", "syncthing", "-v", debver, "-a", debarch,
-		"--vendor", maintainer, "-m", maintainer,
-		"-d", "libc6",
-		"-d", "procps", // because postinst script
+	args := []string{
+		"-t", "deb",
+		"-s", "dir",
+		"-C", "deb",
+		"-n", target.debname,
+		"-v", debver,
+		"-a", debarch,
+		"-m", maintainer,
+		"--vendor", maintainer,
+		"--description", target.description,
 		"--url", "https://syncthing.net/",
-		"--description", "Open Source Continuous File Synchronization",
-		"--after-upgrade", "script/post-upgrade",
-		"--license", "MPL-2")
+		"--license", "MPL-2",
+	}
+	for _, dep := range target.debdeps {
+		args = append(args, "-d", dep)
+	}
+	if target.debpost != "" {
+		args = append(args, "--after-upgrade", target.debpost)
+	}
+	runPrint("fpm", args...)
 }
 
 func buildSnap(target target) {
@@ -577,21 +587,36 @@ func buildSnap(target target) {
 	runPrint("snapcraft")
 }
 
+// copyFile copies a file from src to dst, ensuring the containing directory
+// exists. The permission bits are copied as well. If dst already exists and
+// the contents are identical to src the modification time is not updated.
 func copyFile(src, dst string, perm os.FileMode) error {
-	dstDir := filepath.Dir(dst)
-	os.MkdirAll(dstDir, 0755) // ignore error
-	srcFd, err := os.Open(src)
+	in, err := ioutil.ReadFile(src)
 	if err != nil {
 		return err
 	}
-	defer srcFd.Close()
-	dstFd, err := os.OpenFile(dst, os.O_CREATE|os.O_TRUNC|os.O_WRONLY, perm)
+
+	out, err := ioutil.ReadFile(dst)
 	if err != nil {
+		// The destination probably doesn't exist, we should create
+		// it.
+		goto copy
+	}
+
+	if bytes.Equal(in, out) {
+		// The permission bits may have changed without the contents
+		// changing so we always mirror them.
+		os.Chmod(dst, perm)
+		return nil
+	}
+
+copy:
+	os.MkdirAll(filepath.Dir(dst), 0777)
+	if err := ioutil.WriteFile(dst, in, perm); err != nil {
 		return err
 	}
-	defer dstFd.Close()
-	_, err = io.Copy(dstFd, srcFd)
-	return err
+
+	return nil
 }
 
 func listFiles(dir string) []string {
@@ -646,7 +671,7 @@ func shouldRebuildAssets(target, srcdir string) bool {
 }
 
 func proto() {
-	runPrint("go", "generate", "./lib/...")
+	runPrint("go", "generate", "github.com/syncthing/syncthing/lib/...")
 }
 
 func translate() {
@@ -773,8 +798,9 @@ func getBranchSuffix() string {
 	}
 
 	branch = parts[len(parts)-1]
-	if branch == "master" {
-		// master builds are the default.
+	switch branch {
+	case "master", "release":
+		// these are not special
 		return ""
 	}
 
@@ -898,7 +924,10 @@ func tarGz(out string, files []archiveFile) {
 		log.Fatal(err)
 	}
 
-	gw := gzip.NewWriter(fd)
+	gw, err := gzip.NewWriterLevel(fd, gzip.BestCompression)
+	if err != nil {
+		log.Fatal(err)
+	}
 	tw := tar.NewWriter(gw)
 
 	for _, f := range files {
@@ -951,6 +980,21 @@ func zipFile(out string, files []archiveFile) {
 
 	zw := zip.NewWriter(fd)
 
+	var fw *flate.Writer
+
+	// Register the deflator.
+	zw.RegisterCompressor(zip.Deflate, func(out io.Writer) (io.WriteCloser, error) {
+		var err error
+		if fw == nil {
+			// Creating a flate compressor for every file is
+			// expensive, create one and reuse it.
+			fw, err = flate.NewWriter(out, flate.BestCompression)
+		} else {
+			fw.Reset(out)
+		}
+		return fw, err
+	})
+
 	for _, f := range files {
 		sf, err := os.Open(f.src)
 		if err != nil {
@@ -1026,59 +1070,129 @@ func macosCodesign(file string) {
 	}
 }
 
-func metalint(linters []string, dirs []string) {
-	ok := true
-	if isGometalinterInstalled() {
-		if !gometalinter(linters, dirs, lintExcludes...) {
-			ok = false
-		}
-	}
-	if !ok {
-		log.Fatal("Build succeeded, but there were lint warnings")
-	}
+func metalint() {
+	lazyRebuildAssets()
+	runPrint("go", "test", "-run", "Metalint", "./meta")
 }
 
-func isGometalinterInstalled() bool {
-	if _, err := runError("gometalinter", "--disable-all"); err != nil {
-		log.Println("gometalinter is not installed")
-		return false
-	}
-	return true
+func metalintShort() {
+	lazyRebuildAssets()
+	runPrint("go", "test", "-short", "-run", "Metalint", "./meta")
 }
 
-func gometalinter(linters []string, dirs []string, excludes ...string) bool {
-	params := []string{"--disable-all", "--concurrency=2", "--deadline=300s"}
+func temporaryBuildDir() (string, error) {
+	// The base of our temp dir is "syncthing-xxxxxxxx" where the x:es
+	// are eight bytes from the sha256 of our working directory. We do
+	// this because we want a name in the global temp dir that doesn't
+	// conflict with someone else building syncthing on the same
+	// machine, yet is persistent between runs from the same source
+	// directory.
+	wd, err := os.Getwd()
+	if err != nil {
+		return "", err
+	}
+	hash := sha256.Sum256([]byte(wd))
+	base := fmt.Sprintf("syncthing-%x", hash[:4])
 
-	for _, linter := range linters {
-		params = append(params, "--enable="+linter)
+	// The temp dir is taken from $STTMPDIR if set, otherwise the system
+	// default (potentially infrluenced by $TMPDIR on unixes).
+	var tmpDir string
+	if t := os.Getenv("STTMPDIR"); t != "" {
+		tmpDir = t
+	} else {
+		tmpDir = os.TempDir()
 	}
 
-	for _, exclude := range excludes {
-		params = append(params, "--exclude="+exclude)
+	return filepath.Join(tmpDir, base), nil
+}
+
+func buildGOPATH(gopath string) error {
+	pkg := filepath.Join(gopath, "src/github.com/syncthing/syncthing")
+	dirs := []string{"cmd", "lib", "meta", "script", "test", "vendor"}
+
+	if debug {
+		t0 := time.Now()
+		log.Println("build temporary GOPATH in", gopath)
+		defer func() {
+			log.Println("... in", time.Since(t0))
+		}()
 	}
 
+	// Walk the sources and copy the files into the temporary GOPATH.
+	// Remember which files are supposed to be present so we can clean
+	// out everything else in the next step. The copyFile() step will
+	// only actually copy the file if it doesn't exist or the contents
+	// differ.
+
+	exists := map[string]struct{}{}
 	for _, dir := range dirs {
-		params = append(params, dir)
+		err := filepath.Walk(dir, func(path string, info os.FileInfo, err error) error {
+			if err != nil {
+				return err
+			}
+			if info.IsDir() {
+				return nil
+			}
+
+			dst := filepath.Join(pkg, path)
+			exists[dst] = struct{}{}
+
+			if err := copyFile(path, dst, info.Mode()); err != nil {
+				return err
+			}
+
+			return nil
+		})
+		if err != nil {
+			return err
+		}
 	}
 
-	bs, _ := runError("gometalinter", params...)
+	// Walk the temporary GOPATH and remove any files that we wouldn't
+	// have copied there in the previous step.
 
-	nerr := 0
-	lines := make(map[string]struct{})
-	for _, line := range strings.Split(string(bs), "\n") {
-		if line == "" {
-			continue
+	filepath.Walk(pkg, func(path string, info os.FileInfo, err error) error {
+		if err != nil {
+			return err
 		}
-		if _, ok := lines[line]; ok {
-			continue
+		if info.IsDir() {
+			return nil
 		}
-		log.Println(line)
-		if strings.Contains(line, "executable file not found") {
-			log.Println(` - Try "go run build.go setup" to install missing tools`)
+		if _, ok := exists[path]; !ok {
+			os.Remove(path)
 		}
-		lines[line] = struct{}{}
-		nerr++
-	}
+		return nil
+	})
 
-	return nerr == 0
+	return nil
+}
+
+func gopath() string {
+	if gopath := os.Getenv("GOPATH"); gopath != "" {
+		// The env var is set, use that.
+		return gopath
+	}
+
+	// Ask Go what it thinks.
+	bs, err := runError("go", "env", "GOPATH")
+	if err != nil {
+		return ""
+	}
+
+	// We got something. Check if we are in fact available in that location.
+	gopath := string(bs)
+	if _, err := os.Stat(filepath.Join(gopath, "src/github.com/syncthing/syncthing/build.go")); err == nil {
+		// That seems to be the gopath.
+		return gopath
+	}
+
+	// The gopath is not valid.
+	return ""
+}
+
+func (t target) BinaryName() string {
+	if goos == "windows" {
+		return t.binaryName + ".exe"
+	}
+	return t.binaryName
 }

build.sh

@@ -61,9 +61,9 @@ case "${1:-default}" in
 	prerelease)
 		go run script/authors.go
 		build transifex
-		git add -A gui/default/assets/ lib/auto/
 		pushd man ; ./refresh.sh ; popd
-		git add -A man
+		git add -A gui man
+		git commit -m 'gui, man: Update docs & translations'
 		;;
 
 	noupgrade)
@@ -93,40 +93,6 @@ case "${1:-default}" in
 		done
 		;;
 
-	test-cov)
-		ulimit -t 600 &>/dev/null || true
-		ulimit -d 512000 &>/dev/null || true
-		ulimit -m 512000 &>/dev/null || true
-
-		echo "mode: set" > coverage.out
-		fail=0
-
-		# For every package in the repo
-		for dir in $(go list ./lib/... ./cmd/...) ; do
-			# run the tests
-			GOPATH="$(pwd)/Godeps/_workspace:$GOPATH" go test -coverprofile=profile.out $dir
-			if [ -f profile.out ] ; then
-				# and if there was test output, append it to coverage.out
-				grep -v "mode: " profile.out >> coverage.out
-				rm profile.out
-			fi
-		done
-
-		notCovered=$(egrep -c '\s0$' coverage.out)
-		total=$(wc -l coverage.out | awk '{print $1}')
-		coverPct=$(awk "BEGIN{print (1 - $notCovered / $total) * 100}")
-		echo "Total coverage is $coverPct%"
-
-		gocov convert coverage.out | gocov-xml > coverage.xml
-
-		# This is usually run from within Jenkins. If it is, we need to
-		# tweak the paths in coverage.xml so cobertura finds the
-		# source.
-		if [[ "${WORKSPACE:-default}" != "default" ]] ; then
-			sed "s#$WORKSPACE##g" < coverage.xml > coverage.xml.new && mv coverage.xml.new coverage.xml
-		fi
-		;;
-
 	test-xunit)
 		ulimit -t 600 &>/dev/null || true
 		ulimit -d 512000 &>/dev/null || true

cmd/strelaypoolsrv/gui/index.html

@@ -2,15 +2,15 @@
 
 <html lang="en" ng-app="syncthing" ng-controller="relayDataController">
   <head>
-    <meta charset="utf-8">
-    <meta http-equiv="X-UA-Compatible" content="IE=edge">
-    <meta name="viewport" content="width=device-width, initial-scale=1.0">
-    <meta name="description" content="">
-    <meta name="author" content="">
+    <meta charset="utf-8"/>
+    <meta http-equiv="X-UA-Compatible" content="IE=edge"/>
+    <meta name="viewport" content="width=device-width, initial-scale=1.0"/>
+    <meta name="description" content=""/>
+    <meta name="author" content=""/>
 
     <title>Relay stats</title>
-    <link href="//maxcdn.bootstrapcdn.com/bootstrap/3.3.5/css/bootstrap.min.css" rel="stylesheet">
-    <link rel="stylesheet" href="//maxcdn.bootstrapcdn.com/font-awesome/4.6.1/css/font-awesome.min.css">
+    <link href="//maxcdn.bootstrapcdn.com/bootstrap/3.3.5/css/bootstrap.min.css" rel="stylesheet"/>
+    <link rel="stylesheet" href="//maxcdn.bootstrapcdn.com/font-awesome/4.6.1/css/font-awesome.min.css"/>
 
     <style>
       #map {
@@ -36,9 +36,9 @@
 
   <body class="ng-cloak">
     <div class="container">
-      <h1>Relay Pool Data</h2>
+      <h1>Relay Pool Data</h1>
       <div ng-if="relays === undefined" class="text-center">
-        <img src="//cdnjs.cloudflare.com/ajax/libs/galleriffic/2.0.1/css/loader.gif"/>
+        <img src="//cdnjs.cloudflare.com/ajax/libs/galleriffic/2.0.1/css/loader.gif" alt=""/>
         <p>Please wait while we gather data</p>
       </div>
       <div>
@@ -138,7 +138,7 @@
             </tr>
           </thead>
           <tbody>
-            <tr ng-repeat="relay in relays | orderBy:sortType:sortReverse:sortCompare">
+            <tr ng-repeat="relay in relays | orderBy:sortType:sortReverse:sortCompare" ng-mouseover="relay.showMarker()" ng-mouseleave="relay.hideMarker()">
               <td>{{ relay.address }}</td>
               <td ng-if="relay.status === undefined" colspan="11" class="text-center">Looking up...</td>
               <td ng-if-start="relay.status !== undefined">{{ relay.status.numActiveSessions }}</td>
@@ -184,10 +184,10 @@
     </div>
 
 
-    <script src="//code.jquery.com/jquery-2.1.4.min.js"></script>
-    <script src="//cdnjs.cloudflare.com/ajax/libs/angular.js/1.5.8/angular.min.js"></script>
-    <script src="//maxcdn.bootstrapcdn.com/bootstrap/3.3.5/js/bootstrap.min.js"></script>
-    <script src="//maps.googleapis.com/maps/api/js"></script>
+    <script type="text/javascript" src="//code.jquery.com/jquery-2.1.4.min.js"></script>
+    <script type="text/javascript" src="//cdnjs.cloudflare.com/ajax/libs/angular.js/1.5.8/angular.min.js"></script>
+    <script type="text/javascript" src="//maxcdn.bootstrapcdn.com/bootstrap/3.3.5/js/bootstrap.min.js"></script>
+    <script type="text/javascript" src="//maps.googleapis.com/maps/api/js"></script>
   </body>
 
   <script>
@@ -307,13 +307,16 @@
           content: $compile($scope.tooltipTemplate)(scope)[0],
         });
 
-        relay.marker.addListener('mouseover', function() {
+        relay.showMarker = function() {
           relay.marker.info.open($scope.map, relay.marker);
-        });
+        }
 
-        relay.marker.addListener('mouseout', function() {
+        relay.hideMarker = function() {
           relay.marker.info.close();
-        });
+        }
+
+        relay.marker.addListener('mouseover', relay.showMarker);
+        relay.marker.addListener('mouseout', relay.hideMarker);
 
         $scope.mapBounds.extend(relay.marker.position);
     }
@@ -392,12 +395,12 @@
         <span ng-if="relay.status.options['global-rate'] != undefined">
           <span ng-if="relay.status.options['global-rate'] > 0">Global rate limit: {{ relay.status.options['global-rate'] | bytes }}/s</span>
           <span ng-if="relay.status.options['global-rate'] == 0">Global rate limit: unlimited</span>
-          </br>
+          <br/>
         </span>
         <span ng-if="relay.status.options['per-session-rate'] != undefined">
           <span ng-if="relay.status.options['per-session-rate'] > 0">Session rate limit: {{ relay.status.options['per-session-rate'] | bytes }}/s</span>
           <span ng-if="relay.status.options['per-session-rate'] == 0">Session rate limit: unlimited</span>
-          </br>
+          <br/>
         </span>
       </div>
       <div ng-if="!relay.status">

cmd/strelaysrv/listener.go

@@ -59,6 +59,13 @@ func listener(proto, addr string, config *tls.Config) {
 
 func protocolConnectionHandler(tcpConn net.Conn, config *tls.Config) {
 	conn := tls.Server(tcpConn, config)
+	if err := conn.SetDeadline(time.Now().Add(messageTimeout)); err != nil {
+		if debug {
+			log.Println("Weird error setting deadline:", err, "on", conn.RemoteAddr())
+		}
+		conn.Close()
+		return
+	}
 	err := conn.Handshake()
 	if err != nil {
 		if debug {
@@ -81,6 +88,7 @@ func protocolConnectionHandler(tcpConn net.Conn, config *tls.Config) {
 		conn.Close()
 		return
 	}
+	conn.SetDeadline(time.Time{})
 
 	id := syncthingprotocol.NewDeviceID(certs[0].Raw)
 
@@ -277,6 +285,7 @@ func sessionConnectionHandler(conn net.Conn) {
 		if debug {
 			log.Println("Weird error setting deadline:", err, "on", conn.RemoteAddr())
 		}
+		conn.Close()
 		return
 	}
 

cmd/strelaysrv/status.go

@@ -16,8 +16,16 @@ var rc *rateCalculator
 func statusService(addr string) {
 	rc = newRateCalculator(360, 10*time.Second, &bytesProxied)
 
-	http.HandleFunc("/status", getStatus)
-	if err := http.ListenAndServe(addr, nil); err != nil {
+	handler := http.NewServeMux()
+	handler.HandleFunc("/status", getStatus)
+
+	srv := http.Server{
+		Addr:        addr,
+		Handler:     handler,
+		ReadTimeout: 15 * time.Second,
+	}
+	srv.SetKeepAlivesEnabled(false)
+	if err := srv.ListenAndServe(); err != nil {
 		log.Fatal(err)
 	}
 }

cmd/syncthing/gui_test.go

@@ -943,7 +943,7 @@ func TestEventMasks(t *testing.T) {
 	}
 
 	expected = 0
-	if mask := svc.getEventMask("WeirdEvent,something else that doens't exist"); mask != expected {
+	if mask := svc.getEventMask("WeirdEvent,something else that doesn't exist"); mask != expected {
 		t.Errorf("incorrect parsed mask %x != %x", int64(mask), int64(expected))
 	}
 

cmd/syncthing/main.go

@@ -269,7 +269,7 @@ func defaultRuntimeOptions() RuntimeOptions {
 	}
 
 	if os.Getenv("STTRACE") != "" {
-		options.logFlags = log.Ltime | log.Ldate | log.Lmicroseconds | log.Lshortfile
+		options.logFlags = logger.DebugFlags
 	}
 
 	if runtime.GOOS != "windows" {
@@ -1074,7 +1074,7 @@ func setupGUI(mainService *suture.Supervisor, cfg *config.Wrapper, m *model.Mode
 
 	if cfg.Options().StartBrowser && !runtimeOptions.noBrowser && !runtimeOptions.stRestarting {
 		// Can potentially block if the utility we are invoking doesn't
-		// fork, and just execs, hence keep it in it's own routine.
+		// fork, and just execs, hence keep it in its own routine.
 		<-api.startedOnce
 		go openURL(guiCfg.URL())
 	}

etc/linux-upstart/README.md

@@ -5,7 +5,7 @@ the "Upstart" service manager on Linux. To have syncthing start when you login
 place "user/syncthing.conf" in the "/home/[username]/.config/upstart/" folder.
 To have syncthing start when the system boots place "system/syncthing.conf"
 in the "/etc/init/" folder.
-To manualy start syncthing via Upstart when using the system configuration use:
+To manually start syncthing via Upstart when using the system configuration use:
 
 ```
     sudo initctl start syncthing

gui/default/assets/lang/lang-bg.json

@@ -158,6 +158,8 @@
     "Please consult the release notes before performing a major upgrade.": "Моля прочети бележките по обновяването преди да започнеш.",
     "Please set a GUI Authentication User and Password in the Settings dialog.": "Моля задайте потребителско име и парола за потребителския интерфейс в секцията Настройки.",
     "Please wait": "Моля изчакай",
+    "Prefix indicating that the file can be deleted if preventing directory removal": "Представка, която индикира, че файлът може да бъде изтрит ако пречи на премахването на папка",
+    "Prefix indicating that the pattern should be matched without case sensitivity": "Представка, която индикира, че зададения шаблон трябва да бъде проверен без значение за главни/малки букви",
     "Preview": "Преглед",
     "Preview Usage Report": "Разгледай доклада за използване",
     "Quick guide to supported patterns": "Бърз наръчник към поддържаните шаблони",
@@ -271,6 +273,7 @@
     "When adding a new device, keep in mind that this device must be added on the other side too.": "Когато добавяш ново устройство помни, че твоето устройство също трябва да бъде добавено от другата страна.",
     "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Когато добавяш нов идентификатор на папка помни, че той се използва за свързване на папките на различни устройства. Главни/малки букви са от значение и трябва да са еднакви на всички устройства.",
     "Yes": "Да",
+    "You can also select one of these nearby devices:": "Също така може да изберете едно от следните устройтва намиращи се наблизо:",
     "You can change your choice at any time in the Settings dialog.": "Може да промените решението си по всяко време в прозореца Настройки.",
     "You can read more about the two release channels at the link below.": "Може да научите допълнително за двата канала на версии, следвайки връзката по-долу.",
     "You must keep at least one version.": "Трябва да пазиш поне една версия.",

gui/default/assets/lang/lang-ca@valencia.json

@@ -158,6 +158,8 @@
     "Please consult the release notes before performing a major upgrade.": "Per favor, consultar les notes de la versió abans de fer una actualització important.",
     "Please set a GUI Authentication User and Password in the Settings dialog.": "Per favor, estableix un usuari i password per a l'Interfície Gràfica d'Usuari en el menú d'Adjustos.",
     "Please wait": "Per favor, espere",
+    "Prefix indicating that the file can be deleted if preventing directory removal": "Prefix indicating that the file can be deleted if preventing directory removal",
+    "Prefix indicating that the pattern should be matched without case sensitivity": "Prefix indicating that the pattern should be matched without case sensitivity",
     "Preview": "Vista prèvia",
     "Preview Usage Report": "Informe d'ús de vista prèvia",
     "Quick guide to supported patterns": "Guía ràpida de patrons suportats",
@@ -271,6 +273,7 @@
     "When adding a new device, keep in mind that this device must be added on the other side too.": "Quant s'afig un nou dispositiu, hi ha que tindre en compte que aquest dispositiu deu ser afegit també en l'altre costat.",
     "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Quant s'afig una nova carpeta, hi ha que tindre en compte que l'ID de la carpeta s'utilitza per a juntar les carpetes entre dispositius. Són sensibles a les majúscules i deuen coincidir exactament entre tots els dispositius.",
     "Yes": "Sí",
+    "You can also select one of these nearby devices:": "You can also select one of these nearby devices:",
     "You can change your choice at any time in the Settings dialog.": "Pots canviar la teua elecció en qualsevol moment en el dialog Ajustos",
     "You can read more about the two release channels at the link below.": "Pots llegir més sobre els dos canals de versions en l'enllaç de baix.",
     "You must keep at least one version.": "Es deu mantindre al menys una versió.",

gui/default/assets/lang/lang-cs.json

@@ -10,7 +10,7 @@
     "Add Device": "Přidat přístroj",
     "Add Folder": "Přidat adresář",
     "Add Remote Device": "Přidat vzdálené zařízení",
-    "Add devices from the introducer to our device list, for mutually shared folders.": "Přidat zařízení ze zavaděče do našeho seznamu zařízení (pro vzájemně sdílené adresáře.)",
+    "Add devices from the introducer to our device list, for mutually shared folders.": "Přidat zařízení ze zavaděče do našeho seznamu zařízení, pro vzájemně sdílené adresáře.",
     "Add new folder?": "Přidat nový adresář?",
     "Address": "Adresa",
     "Addresses": "Adresy",
@@ -93,7 +93,7 @@
     "GUI": "GUI",
     "GUI Authentication Password": "Přihlašovací heslo pro GUI",
     "GUI Authentication User": "Přihlašovací jméno pro GUI",
-    "GUI Listen Address": "GUI Listen Address",
+    "GUI Listen Address": "Adresa naslouchání GUI",
     "GUI Listen Addresses": "Adresa naslouchání GUI",
     "GUI Theme": "Grafické téma",
     "Generate": "Generovat",
@@ -158,6 +158,8 @@
     "Please consult the release notes before performing a major upgrade.": "Před spuštěním důležité aktualizace si nejdříve přečtěte poznámky k vydání nové verze.",
     "Please set a GUI Authentication User and Password in the Settings dialog.": "Zadejte prosím přihlašovací jméno a heslo pro GUI v dialogu nastavení.",
     "Please wait": "Chvíli strpení",
+    "Prefix indicating that the file can be deleted if preventing directory removal": "Prefix indicating that the file can be deleted if preventing directory removal",
+    "Prefix indicating that the pattern should be matched without case sensitivity": "Prefix indicating that the pattern should be matched without case sensitivity",
     "Preview": "Náhled",
     "Preview Usage Report": "Náhled záznamu o využítí",
     "Quick guide to supported patterns": "Rychlá nápověda k podporovaným vzorům",
@@ -271,6 +273,7 @@
     "When adding a new device, keep in mind that this device must be added on the other side too.": "Při přidávání nového přístroje mějte na paměti, že je ho třeba také zadat na druhé straně.",
     "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Při přidávání nového adresáře mějte na paměti, že jeho ID je použito ke svázání adresářů napříč přístoji. Rozlišují se malá a velká písmena a musí přesně souhlasit mezi všemi přístroji.",
     "Yes": "Ano",
+    "You can also select one of these nearby devices:": "You can also select one of these nearby devices:",
     "You can change your choice at any time in the Settings dialog.": "Vaši volbu můžete kdykoliv změnit v dialogu nastavení.",
     "You can read more about the two release channels at the link below.": "O kandidátech na vydání si můžete přečíst více v odkazu níže.",
     "You must keep at least one version.": "Je třeba ponechat alespoň jednu verzi.",

gui/default/assets/lang/lang-da.json

@@ -158,6 +158,8 @@
     "Please consult the release notes before performing a major upgrade.": "Tjek venligst udgivelsesnoterne før opgradering til en ny version.",
     "Please set a GUI Authentication User and Password in the Settings dialog.": "Sæt vensligt en GUI bruger og kodeord i opsætningsdialogen.",
     "Please wait": "Vent venligst",
+    "Prefix indicating that the file can be deleted if preventing directory removal": "Prefix indicating that the file can be deleted if preventing directory removal",
+    "Prefix indicating that the pattern should be matched without case sensitivity": "Prefix indicating that the pattern should be matched without case sensitivity",
     "Preview": "Forhåndsvisning",
     "Preview Usage Report": "Forhåndsvisning af forbrugsrapport",
     "Quick guide to supported patterns": "Hurtig guide til supporteret mønstre",
@@ -271,6 +273,7 @@
     "When adding a new device, keep in mind that this device must be added on the other side too.": "Når der tilføjes en ny enhed, vær da opmærksom på, at denne enhed også skal tilføjes på den anden side.",
     "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Når der tilføjes en ny enhed, vær da opmærksom på at samme ID bruges til at forbinde mapperne på de forskellige enheder. Der er forskel på store og små bogstaver, og ID skal være fuldstændig identisk på alle enheder.",
     "Yes": "Ja",
+    "You can also select one of these nearby devices:": "You can also select one of these nearby devices:",
     "You can change your choice at any time in the Settings dialog.": "Du kan altid ændre dit valg under indstillinger.",
     "You can read more about the two release channels at the link below.": "Du kan læse mere om de to udgivelseskanaler på links herunder.",
     "You must keep at least one version.": "Du skal beholde mindst én version.",

gui/default/assets/lang/lang-de.json

@@ -158,6 +158,8 @@
     "Please consult the release notes before performing a major upgrade.": "Bitte lesen Sie die Veröffentlichungsnotizen bevor Sie eine neue Hauptversion installieren.",
     "Please set a GUI Authentication User and Password in the Settings dialog.": "Bitte setze einen Benutzer und ein Passwort für das GUI in den Einstellungen.",
     "Please wait": "Bitte warten",
+    "Prefix indicating that the file can be deleted if preventing directory removal": "Prefix indicating that the file can be deleted if preventing directory removal",
+    "Prefix indicating that the pattern should be matched without case sensitivity": "Prefix indicating that the pattern should be matched without case sensitivity",
     "Preview": "Vorschau",
     "Preview Usage Report": "Vorschau des Nutzungsberichts",
     "Quick guide to supported patterns": "Schnellanleitung zu den unterstützten Mustern",
@@ -271,6 +273,7 @@
     "When adding a new device, keep in mind that this device must be added on the other side too.": "Beachte beim Hinzufügen eines neuen Gerätes, dass dieses Gerät auch auf den anderen Geräten hinzugefügt werden muss.",
     "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Beachte bitte beim Hinzufügen eines neuen Ordners, dass die Ordnerkennung dazu verwendet wird, Ordner zwischen Geräten zu verbinden. Die Kennung muss also auf allen Geräten gleich sein, die Groß- und Kleinschreibung muss dabei beachtet werden.",
     "Yes": "Ja",
+    "You can also select one of these nearby devices:": "You can also select one of these nearby devices:",
     "You can change your choice at any time in the Settings dialog.": "Sie können Ihre Wahl jederzeit in den Einstellungen ändern.",
     "You can read more about the two release channels at the link below.": "Über den untenstehenden Link können Sie mehr über die zwei Veröffentlichungskanäle erfahren.",
     "You must keep at least one version.": "Du musst mindestens eine Version behalten.",

gui/default/assets/lang/lang-el.json

@@ -77,7 +77,7 @@
     "Failed Items": "Αρχεία που απέτυχαν",
     "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "Είναι φυσιολογική η αποτυχία σύνδεσης σε εξυπηρετητές IPv6 όταν δεν υπάρχει συνδεσιμότητα IPv6.",
     "File Pull Order": "Σειρά με την οποία θα κατεβαίνουν τα αρχεία",
-    "File Versioning": "Τήρηση εκδόσεων",
+    "File Versioning": "Τήρηση εκδόσεων αρχείων",
     "File permission bits are ignored when looking for changes. Use on FAT file systems.": "Τα δικαιώματα των αρχείων θα αγνοούνται όταν κοιτάζω για αλλαγές. Αφορά συστήματα αρχείων FAT.",
     "Files are moved to .stversions directory when replaced or deleted by Syncthing.": "Τα αρχεία που σβήνονται ή αντικαθίστανται από το Syncthing μετακινούνται στον κατάλογο .stversions.",
     "Files are moved to .stversions folder when replaced or deleted by Syncthing.": "Τα αρχεία που σβήνονται ή αντικαθιστούνται από το Syncthing μετακινούνται σε έναν φάκελο .stversions με χρονοσφραγίδα.",
@@ -158,6 +158,8 @@
     "Please consult the release notes before performing a major upgrade.": "Παρακαλούμε, πριν από την εκτέλεση μιας σημαντικής αναβάθμισης, να συμβουλευτείς το σημείωμα που τη συνοδεύει.  ",
     "Please set a GUI Authentication User and Password in the Settings dialog.": "Παρακαλώ όρισε στις ρυθμίσεις έναν χρήστη και έναν κωδικό πρόσβασης για τη διεπαφή.",
     "Please wait": "Παρακαλώ περιμένετε",
+    "Prefix indicating that the file can be deleted if preventing directory removal": "Πρόθεμα που δείχνει ότι το αρχείο θα μπορεί να διαγραφεί αν εμποδίζει τη διαγραφή καταλόγου",
+    "Prefix indicating that the pattern should be matched without case sensitivity": "Πρόθεμα που δείχνει ότι αντιστοίχιση του προτύπου θα γίνεται χωρίς διάκριση πεζών και κεφαλαίων χαρακτήρων",
     "Preview": "Προεπισκόπηση",
     "Preview Usage Report": "Προεπισκόπηση αναφοράς χρήσης",
     "Quick guide to supported patterns": "Σύντομη βοήθεια σχετικά με τα πρότυπα αναζήτησης που υποστηρίζονται",
@@ -235,7 +237,7 @@
     "The maximum time to keep a version (in days, set to 0 to keep versions forever).": "Η μέγιστη ηλικία παλιότερων εκδόσεων (σε ημέρες, αν δώσεις 0 οι παλιότερες εκδόσεις θα διατηρούνται για πάντα).",
     "The minimum free disk space percentage must be a non-negative number between 0 and 100 (inclusive).": "Το ποσοστό του ελάχιστου διαθέσιμου αποθηκευτικόυ χώρου πρέπει να είναι έναν μη-αρνητικός αριθμός μεταξύ του 0 και του 100 (συμπεριλαμβανομένων)",
     "The number of days must be a number and cannot be blank.": "Ο αριθμός ημερών πρέπει να είναι αριθμός και σίγουρα όχι κενό.",
-    "The number of days to keep files in the trash can. Zero means forever.": "Ο αριθμός ημερών που θα διατηρούντα τα αρχεία στον κάδο. Μηδέν σημαίνει διατήρηση για πάντα.",
+    "The number of days to keep files in the trash can. Zero means forever.": "Ο αριθμός ημερών που θα διατηρούνται τα αρχεία στον κάδο. Μηδέν σημαίνει διατήρηση για πάντα.",
     "The number of old versions to keep, per file.": "Πόσες παλιότερες εκδόσεις θα διατηρούνται, ανά αρχείο.",
     "The number of versions must be a number and cannot be blank.": "Ο αριθμός εκδόσεων πρέπει να είναι αριθμός και σίγουρα όχι κενό.",
     "The path cannot be blank.": "Το μονοπάτι δεν μπορεί να είναι κενό.",
@@ -271,6 +273,7 @@
     "When adding a new device, keep in mind that this device must be added on the other side too.": "Θυμήσου πως όταν προσθέτεις μια νέα συσκευή, ετούτη η συσκευή θα πρέπει να προστεθεί και στην άλλη πλευρά.",
     "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Όταν προσθέτεις έναν νέο φάκελο, θυμήσου πως η ταυτότητα ενός φακέλου χρησιμοποιείται για να να συσχετίσει φακέλους μεταξύ συσκευών. Η ταυτότητα του φακέλου θα πρέπει να είναι η ίδια σε όλες τις συσκευές και έχουν σημασία τα πεζά ή κεφαλαία γράμματα.",
     "Yes": "Ναι",
+    "You can also select one of these nearby devices:": "Μπορείτε επίσης να επιλέξετε μια από αυτές τις κοντινές συσκευές:",
     "You can change your choice at any time in the Settings dialog.": "Μπορείτε να αλλάξετε τη ρύθμιση αυτή ανά πάσα στιγμή στο παράθυρο «Ρυθμίσεις».",
     "You can read more about the two release channels at the link below.": "Μπορείτε να διαβάσετε περισσότερα για τα δύο κανάλια εκδόσεων στον παρακάτω σύνδεσμο.",
     "You must keep at least one version.": "Πρέπει να τηρήσεις τουλάχιστον μια έκδοση.",

gui/default/assets/lang/lang-en-GB.json

@@ -158,6 +158,8 @@
     "Please consult the release notes before performing a major upgrade.": "Please consult the release notes before performing a major upgrade.",
     "Please set a GUI Authentication User and Password in the Settings dialog.": "Please set a GUI Authentication User and Password in the Settings dialogue.",
     "Please wait": "Please wait",
+    "Prefix indicating that the file can be deleted if preventing directory removal": "Prefix indicating that the file can be deleted if preventing directory removal",
+    "Prefix indicating that the pattern should be matched without case sensitivity": "Prefix indicating that the pattern should be matched without case sensitivity",
     "Preview": "Preview",
     "Preview Usage Report": "Preview Usage Report",
     "Quick guide to supported patterns": "Quick guide to supported patterns",
@@ -165,7 +167,7 @@
     "Random": "Random",
     "Reduced by ignore patterns": "Reduced by ignore patterns",
     "Release Notes": "Release Notes",
-    "Release candidates contain the latest features and fixes. They are similar to the traditional bi-weekly Syncthing releases.": "Release candidates contain the latest features and fixes. They are similar to the traditional bi-weekly Syncthing releases.",
+    "Release candidates contain the latest features and fixes. They are similar to the traditional bi-weekly Syncthing releases.": "Release candidates contain the latest features and fixes. They are similar to the traditional fortnightly Syncthing releases.",
     "Remote Devices": "Remote Devices",
     "Remove": "Remove",
     "Required identifier for the folder. Must be the same on all cluster devices.": "Required identifier for the folder. Must be the same on all cluster devices.",
@@ -271,7 +273,8 @@
     "When adding a new device, keep in mind that this device must be added on the other side too.": "When adding a new device, keep in mind that this device must be added on the other side too.",
     "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.",
     "Yes": "Yes",
-    "You can change your choice at any time in the Settings dialog.": "You can change your choice at any time in the Settings dialog.",
+    "You can also select one of these nearby devices:": "You can also select one of these nearby devices:",
+    "You can change your choice at any time in the Settings dialog.": "You can change your choice at any time in the Settings dialogue.",
     "You can read more about the two release channels at the link below.": "You can read more about the two release channels at the link below.",
     "You must keep at least one version.": "You must keep at least one version.",
     "days": "days",

gui/default/assets/lang/lang-en.json

@@ -273,6 +273,7 @@
    "When adding a new device, keep in mind that this device must be added on the other side too.": "When adding a new device, keep in mind that this device must be added on the other side too.",
    "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.",
    "Yes": "Yes",
+   "You can also select one of these nearby devices:": "You can also select one of these nearby devices:",
    "You can change your choice at any time in the Settings dialog.": "You can change your choice at any time in the Settings dialog.",
    "You can read more about the two release channels at the link below.": "You can read more about the two release channels at the link below.",
    "You must keep at least one version.": "You must keep at least one version.",

gui/default/assets/lang/lang-eo.json

@@ -158,6 +158,8 @@
     "Please consult the release notes before performing a major upgrade.": "Bonvolu konsulti la eldonitajn notojn antaŭ elfari ĉefan ĝisdatigon.",
     "Please set a GUI Authentication User and Password in the Settings dialog.": "Bonvolu agordi GUI Authentication Uzanto kaj Pasvorto en la agordoj dialogo.",
     "Please wait": "Bonvolu atendi",
+    "Prefix indicating that the file can be deleted if preventing directory removal": "Prefix indicating that the file can be deleted if preventing directory removal",
+    "Prefix indicating that the pattern should be matched without case sensitivity": "Prefix indicating that the pattern should be matched without case sensitivity",
     "Preview": "Antaŭrigardo",
     "Preview Usage Report": "Antaŭrigardo Uzada Raporto",
     "Quick guide to supported patterns": "Rapida gvidisto al subtenata ŝablonoj",
@@ -271,6 +273,7 @@
     "When adding a new device, keep in mind that this device must be added on the other side too.": "Dum la aldonado de nova aparato, memoru ke ĉi tiu aparato devas esti aldonita en la alia flanko ankaŭ.",
     "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Dum la aldonado de nova dosierujo, memoru ke la Dosieruja ID estas uzita por ligi la dosierujojn kune inter aparatoj. Ili estas literfakodistingaj kaj devas kongrui precize inter ĉiuj aparatoj.",
     "Yes": "Jes",
+    "You can also select one of these nearby devices:": "You can also select one of these nearby devices:",
     "You can change your choice at any time in the Settings dialog.": "Vi povas ŝanĝi vian elekton iam ajn en la Agorda dialogo.",
     "You can read more about the two release channels at the link below.": "Vi povas legi plu pri la du eldonkanaloj per la malsupra ligilo.",
     "You must keep at least one version.": "Vi devas konservi almenaŭ unu version.",

gui/default/assets/lang/lang-es-ES.json

@@ -158,6 +158,8 @@
     "Please consult the release notes before performing a major upgrade.": "Por favor, consultar las notas de la versión antes de realizar una actualización importante.",
     "Please set a GUI Authentication User and Password in the Settings dialog.": "Por favor, introduzca un Usuario y Contraseña para la Autenticación de la Interfaz de Usuario en el panel de Ajustes.",
     "Please wait": "Por favor, espere",
+    "Prefix indicating that the file can be deleted if preventing directory removal": "Prefix indicating that the file can be deleted if preventing directory removal",
+    "Prefix indicating that the pattern should be matched without case sensitivity": "Prefix indicating that the pattern should be matched without case sensitivity",
     "Preview": "Vista previa",
     "Preview Usage Report": "Informe de uso de vista previa",
     "Quick guide to supported patterns": "Guía rápida de patrones soportados",
@@ -271,6 +273,7 @@
     "When adding a new device, keep in mind that this device must be added on the other side too.": "Cuando añada un nuevo dispositivo, tenga en cuenta que este debe añadirse también en el otro lado.",
     "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Cuando añada una nueva carpeta, tenga en cuenta que su ID se usa para unir carpetas entre dispositivos. Son sensibles a las mayúsculas y deben coincidir exactamente entre todos los dispositivos.",
     "Yes": "Si",
+    "You can also select one of these nearby devices:": "You can also select one of these nearby devices:",
     "You can change your choice at any time in the Settings dialog.": "Puedes cambiar tu elección en cualquier momento en el panel de Ajustes.",
     "You can read more about the two release channels at the link below.": "Puedes leer más sobre los dos método de publicación de versiones en el siguiente enlace.",
     "You must keep at least one version.": "Debes mantener al menos una versión.",

gui/default/assets/lang/lang-es.json

@@ -1,284 +1,287 @@
 {
-    "A device with that ID is already added.": "Ya se ha agregado un dispositivo con esa ID.",
+    "A device with that ID is already added.": "Ya se ha agregado un equipo con ese ID.",
     "A negative number of days doesn't make sense.": "Un número negativo de días no tiene sentido.",
-    "A new major version may not be compatible with previous versions.": "Una versión más reciente puede no ser compatible con las versiones anteriores.",
-    "API Key": "Clave API",
+    "A new major version may not be compatible with previous versions.": "Una nueva versión con cambios importantes puede no ser compatible con versiones anteriores.",
+    "API Key": "Clave del API",
     "About": "Acerca de",
-    "Action": "Acción ",
+    "Action": "Acción",
     "Actions": "Acciones",
     "Add": "Agregar",
-    "Add Device": "Agregar Dispositivo",
-    "Add Folder": "Agregar Repositorio",
-    "Add Remote Device": "Agregar Dispositivo Remoto",
-    "Add devices from the introducer to our device list, for mutually shared folders.": "Add devices from the introducer to our device list, for mutually shared folders.",
-    "Add new folder?": "¿Agregar nueva carpeta?",
+    "Add Device": "Agregar el dispositivo",
+    "Add Folder": "Agregar Carpeta",
+    "Add Remote Device": "Añadir un dispositivo",
+    "Add devices from the introducer to our device list, for mutually shared folders.": "Añadir dispositivos desde el introductor a nuestra lista de dispositivos, para las carpetas compartidas mutuamente.",
+    "Add new folder?": "¿Agregar una carpeta nueva?",
     "Address": "Dirección",
     "Addresses": "Direcciones",
-    "Advanced": "Avanzada",
-    "Advanced Configuration": "Configuración avanzada",
-    "Advanced settings": "Optiones avanzadas",
+    "Advanced": "Avanzado",
+    "Advanced Configuration": "Configuración Avanzada",
+    "Advanced settings": "Ajustes avanzados",
     "All Data": "Todos los datos",
-    "Allow Anonymous Usage Reporting?": "Permitir reporte anónimo de uso?",
-    "Allowed Networks": "Allowed Networks",
+    "Allow Anonymous Usage Reporting?": "¿Deseas permitir el envío anónimo de informes de uso?",
+    "Allowed Networks": "Redes permitidas",
     "Alphabetic": "Alfabético",
-    "An external command handles the versioning. It has to remove the file from the shared folder.": "An external command handles the versioning. It has to remove the file from the shared folder.",
-    "An external command handles the versioning. It has to remove the file from the synced folder.": "Un comando exterior maneja el control de versiones. Éste tiene que eliminar el archivo de la carpeta sincronizada.",
-    "Anonymous Usage Reporting": "Reporte anónimo de uso",
-    "Any devices configured on an introducer device will be added to this device as well.": "Cualquier dispositivo configurado en un dispositivo introductor será también agregado a tu propio dispositivo.",
-    "Automatic upgrade now offers the choice between stable releases and release candidates.": "La actualización automática ofrece la opción entre versiones estables y versiones preliminares.",
+    "An external command handles the versioning. It has to remove the file from the shared folder.": "Un comando externo gestiona las versiones. Tiene que eliminar el fichero de la carpeta compartida.",
+    "An external command handles the versioning. It has to remove the file from the synced folder.": "Un comando externo controla la versión. El fichero debe ser eliminado de la carpeta sincronizada.",
+    "Anonymous Usage Reporting": "Informe anónimo de uso",
+    "Any devices configured on an introducer device will be added to this device as well.": "Cualquier dispositivo configurado en un dispositivo de introducción será añadido también.",
+    "Automatic upgrade now offers the choice between stable releases and release candidates.": "Ahora la actualización automática permite elegir entre versiones estables o versiones candidatas.",
     "Automatic upgrades": "Actualizaciones automáticas",
-    "Be careful!": "¡Sé cuidadoso!",
+    "Be careful!": "¡Ten cuidado!",
     "Bugs": "Errores",
     "CPU Utilization": "Uso de CPU",
     "Changelog": "Registro de cambios",
-    "Clean out after": "Limpiar después",
-    "Click to see discovery failures": "Click to see discovery failures",
+    "Clean out after": "Limpiar tras",
+    "Click to see discovery failures": "Clica para ver fallos de descubrimiento.",
     "Close": "Cerrar",
-    "Command": "Comando",
-    "Comment, when used at the start of a line": "Comentario, cuando es utilizado al inicio de una línea.",
+    "Command": "Acción",
+    "Comment, when used at the start of a line": "Comentar, cuando se usa al comienzo de una línea",
     "Compression": "Compresión",
     "Configured": "Configurado",
     "Connection Error": "Error de conexión",
     "Connection Type": "Tipo de conexión",
-    "Copied from elsewhere": "Copiado desde otra parte.",
+    "Copied from elsewhere": "Copiado de otro sitio",
     "Copied from original": "Copiado del original",
-    "Copyright © 2014-2016 the following Contributors:": "Copyright © 2014-2016 los siguientes contribuidores:",
-    "Copyright © 2014-2017 the following Contributors:": "Copyright © 2014-2017 los siguientes contribuidores:",
-    "Creating ignore patterns, overwriting an existing file at {%path%}.": "Creating ignore patterns, overwriting an existing file at {{path}}.",
-    "Danger!": "Peligro!",
-    "Deleted": "Suprimido",
+    "Copyright © 2014-2016 the following Contributors:": "Copyright © 2014-2016 los siguientes Colaboradores:",
+    "Copyright © 2014-2017 the following Contributors:": "Copyright © 2014-2017 Los siguientes colaboradores:",
+    "Creating ignore patterns, overwriting an existing file at {%path%}.": "Crear patrones a ignorar, sobreescribiendo un fichero existente en {{path}}.",
+    "Danger!": "¡Peligro!",
+    "Deleted": "Eliminado",
     "Device": "Dispositivo",
-    "Device \"{%name%}\" ({%device%} at {%address%}) wants to connect. Add new device?": "Dispositivo \"{{name}}\" ({{device}} en {{address}}) quiere conectar. ¿Añadir nuevo dispositivo?",
-    "Device ID": "ID del dispositivo",
-    "Device Identification": "Identificación del dispositivo",
-    "Device Name": "Nombre del dispositivo",
+    "Device \"{%name%}\" ({%device%} at {%address%}) wants to connect. Add new device?": "El dispositivo \"{{name}}\" ({{device}} en la dirección {{address}}) quiere conectarse. Añadir nuevo dispositivo?",
+    "Device ID": "ID del Dispositivo",
+    "Device Identification": "Identificación del Dispositivo",
+    "Device Name": "Nombre del Dispositivo",
     "Devices": "Dispositivos",
     "Disconnected": "Desconectado",
     "Discovered": "Descubierto",
-    "Discovery": "Búsqueda",
-    "Discovery Failures": "Discovery Failures",
+    "Discovery": "Descubrimiento",
+    "Discovery Failures": "Fallos de Descubrimiento",
     "Documentation": "Documentación",
-    "Download Rate": "Tasa de descarga",
+    "Download Rate": "Velocidad de descarga",
     "Downloaded": "Descargado",
     "Downloading": "Descargando",
     "Edit": "Editar",
-    "Edit Device": "Cambiando dispositivo",
-    "Edit Folder": "Cambiando repositorio",
+    "Edit Device": "Editar Dispositivo",
+    "Edit Folder": "Editar Carpeta",
     "Editing": "Editando",
-    "Editing {%path%}.": "Editing {{path}}.",
-    "Enable NAT traversal": "Habilitar NAT trasversal",
+    "Editing {%path%}.": "Editando {{path}}.",
+    "Enable NAT traversal": "Permitir NAT transversal",
     "Enable Relaying": "Habilitar Retransmisión",
-    "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.",
-    "Enter a non-privileged port number (1024 - 65535).": "Enter a non-privileged port number (1024 - 65535).",
-    "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Introduce las direcciones (\"tcp://ip:puerto\", \"tcp://huésped:puerto\") separadas por comas, o \"dynamic\" para ejecutar un descubrimiento automático de la dirección. ",
-    "Enter ignore patterns, one per line.": "Añadir patrones de exclusión, uno por línea.",
+    "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Introduce un número no negativo (por ejemplo, \"2.35\") y selecciona una unidad. Los porcentajes son como parte del tamaño total del disco.",
+    "Enter a non-privileged port number (1024 - 65535).": "Introduce un puerto sin privilegios (1024 - 65535).",
+    "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Introduzca las direcciones, separadas por comas (\"tcp://ip:port\", \"tcp://host:port\"), o \"dynamic\" para llevar a cabo el descubrimiento automático de la dirección.",
+    "Enter ignore patterns, one per line.": "Introducir patrones a ignorar, uno por línea.",
     "Error": "Error",
-    "External File Versioning": "Control de versiones externo",
-    "Failed Items": "Artículos fallidos",
-    "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.",
-    "File Pull Order": "Orden para coger ficheros",
-    "File Versioning": "Control de versiones",
-    "File permission bits are ignored when looking for changes. Use on FAT file systems.": "Los permisos de archivo son ignorados al buscar cambios. Usar el sistemas de archivos FAT.",
-    "Files are moved to .stversions directory when replaced or deleted by Syncthing.": "Files are moved to .stversions directory when replaced or deleted by Syncthing.",
-    "Files are moved to .stversions folder when replaced or deleted by Syncthing.": "Los archivos son movidos al directorio .stversions cuando son reemplazados o eliminados por Syncthing. Sus caminos de accesos relativos son recreados aquí si necesidad. ",
-    "Files are moved to date stamped versions in a .stversions directory when replaced or deleted by Syncthing.": "Files are moved to date stamped versions in a .stversions directory when replaced or deleted by Syncthing.",
-    "Files are moved to date stamped versions in a .stversions folder when replaced or deleted by Syncthing.": "Lo archivos son movidos al directorio .stversions y renombrados a versiones marcadas por fecha cuando son reemplazados o eliminados por Syncthing, Sus caminos de accesos relativos son recreados aquí si necesidad.",
-    "Files are protected from changes made on other devices, but changes made on this device will be sent to the rest of the cluster.": "Los archivos están protegidos frente a los cambios realizados en otros dispositivos, peros los cambios realizados en este dispositivo serán envíados al resto del grupo",
-    "Folder": "Repositorio",
-    "Folder ID": "ID del repositorio",
-    "Folder Label": "Etiqueta de Carpeta",
-    "Folder Path": "Ruta del repositorio",
-    "Folder Type": "Tipo de Carpeta",
-    "Folders": "Repositorios",
+    "External File Versioning": "Versionado externo de fichero",
+    "Failed Items": "Elementos fallidos",
+    "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "Se espera un fallo al conectar a los servidores IPv6 si no hay conectividad IPv6.",
+    "File Pull Order": "Orden de obtención de los ficheros",
+    "File Versioning": "Versionado de ficheros",
+    "File permission bits are ignored when looking for changes. Use on FAT file systems.": "Los bits de permiso de ficheros son ignorados cuando se buscan cambios. Utilizar en sistemas de ficheros FAT.",
+    "Files are moved to .stversions directory when replaced or deleted by Syncthing.": "Los ficheros son movidos a la carpeta .stversions cuando son reemplazados o borrados por Syncthing.",
+    "Files are moved to .stversions folder when replaced or deleted by Syncthing.": "Los archivos serán movidos a la carpeta .stversions cuando sean reemplazados o borrados por Syncthing.",
+    "Files are moved to date stamped versions in a .stversions directory when replaced or deleted by Syncthing.": "Los ficheros son movidos a una carpeta .stversions a versiones con control de fecha cuando son reemplazados o borrados por Syncthing.",
+    "Files are moved to date stamped versions in a .stversions folder when replaced or deleted by Syncthing.": "Los ficheros son cambiados a versiones con indicación de fecha en una carpeta \".stversions\" cuando son reemplazados o borrados por Syncthing.",
+    "Files are protected from changes made on other devices, but changes made on this device will be sent to the rest of the cluster.": "Los ficheros son protegidos por los cambios hechos en otros dispositivos, pero los cambios hechos en este dispositivo serán enviados al resto del grupo (cluster).",
+    "Folder": "Carpeta",
+    "Folder ID": "ID de carpeta",
+    "Folder Label": "Etiqueta de la Carpeta",
+    "Folder Path": "Ruta de la carpeta",
+    "Folder Type": "Tipo de carpeta",
+    "Folders": "Carpetas",
     "GUI": "GUI",
-    "GUI Authentication Password": "Contraseña de autenticación de la GUI",
-    "GUI Authentication User": "Usuario de la GUI",
-    "GUI Listen Address": "GUI Listen Address",
-    "GUI Listen Addresses": "Direcciones de escucha para la GUI.",
-    "GUI Theme": "Apariencia de la GUI",
+    "GUI Authentication Password": "Password de la Interfaz Gráfica de Usuario (GUI)",
+    "GUI Authentication User": "Autentificación de usuario de la Interfaz Gráfica de Usuario (GUI)",
+    "GUI Listen Address": "Dirección de Escucha del GUI.",
+    "GUI Listen Addresses": "Direcciones de escucha de la Interfaz Gráfica de Usuario (GUI)",
+    "GUI Theme": "Tema GUI",
     "Generate": "Generar",
-    "Global Changes": "Últimas modificaciones",
-    "Global Discovery": "Búsqueda en internet",
-    "Global Discovery Servers": "Servidores globales de identificación",
+    "Global Changes": "Cambios globales",
+    "Global Discovery": "Descubrimiento global",
+    "Global Discovery Servers": "Servidores Globales de Descubrimiento",
     "Global State": "Estado global",
     "Help": "Ayuda",
-    "Home page": "Pagina de inicio",
+    "Home page": "Página de inicio",
     "Ignore": "Ignorar",
-    "Ignore Patterns": "Patrones de exclusión",
-    "Ignore Permissions": "Ignorar permisos",
-    "Incoming Rate Limit (KiB/s)": "Límite de velocidad de entrada (KiB/s)",
-    "Incorrect configuration may damage your folder contents and render Syncthing inoperable.": "Configuración incorrecta puede dañar los contenidos de la carpeta y hacer Syncthing inoperable.",
+    "Ignore Patterns": "Patrones a ignorar",
+    "Ignore Permissions": "Permisos a ignorar",
+    "Incoming Rate Limit (KiB/s)": "Límite de descarga (KiB/s)",
+    "Incorrect configuration may damage your folder contents and render Syncthing inoperable.": "Una configuración incorrecta puede dañar los contenidos de la carpeta y hacer  que Syncthing no funcione.",
     "Introduced By": "Introducido por",
-    "Introducer": "Dispositivo introductor",
-    "Inversion of the given condition (i.e. do not exclude)": "Inversión de la condición dada (es decir, no excluir)",
-    "Keep Versions": "Conservar versiones",
+    "Introducer": "Presentador",
+    "Inversion of the given condition (i.e. do not exclude)": "Inversión de la condición dada (por ejemplo, \"no excluir\")",
+    "Keep Versions": "Mantener versiones",
     "Largest First": "Más grande primero",
     "Last File Received": "Última actualización",
     "Last Scan": "Último escaneo",
-    "Last seen": "Visto por ultima vez",
+    "Last seen": "Visto por última vez",
     "Later": "Más tarde",
-    "Latest Change": "Último cambio",
+    "Latest Change": "Último Cambio",
     "Learn more": "Saber más",
-    "Listeners": "Receptor",
-    "Local Discovery": "Búsqueda en red local",
+    "Listeners": "Oyentes",
+    "Local Discovery": "Descubrimiento local",
     "Local State": "Estado local",
-    "Local State (Total)": "Estado local (total)",
-    "Major Upgrade": "Actualización mayor",
+    "Local State (Total)": "Estado Local (Total)",
+    "Major Upgrade": "Actualización importante",
     "Master": "Maestro",
     "Maximum Age": "Edad máxima",
     "Metadata Only": "Sólo metadatos",
     "Minimum Free Disk Space": "Espacio mínimo libre en disco",
-    "Move to top of queue": "Mover al principio de la cola.",
-    "Multi level wildcard (matches multiple directory levels)": "Carácter comodín multinivel (coincide en el directorio y  sus subdirectorios)",
+    "Move to top of queue": "Mover al principio de la cola",
+    "Multi level wildcard (matches multiple directory levels)": "Comodín multinivel (coincide con múltiples niveles de directorio)",
     "Never": "Nunca",
-    "New Device": "Nuevo dispositivo",
-    "New Folder": "Nuevo repositorio",
-    "Newest First": "Nuevo primero",
+    "New Device": "Nuevo Dispositivo",
+    "New Folder": "Nueva Carpeta",
+    "Newest First": "El más nuevo primero",
     "No": "No",
-    "No File Versioning": "Sin control de versiones de archivos",
-    "No upgrades": "No actualizaciones",
+    "No File Versioning": "Sin versionado de fichero",
+    "No upgrades": "Sin actualizaciones",
     "Normal": "Normal",
     "Notice": "Aviso",
     "OK": "OK",
-    "Off": "Apagado",
-    "Oldest First": "Antiguo primero",
+    "Off": "Desconectar",
+    "Oldest First": "El más antiguo primero",
     "Optional descriptive label for the folder. Can be different on each device.": "Etiqueta descriptiva opcional para la carpeta. Puede ser diferente en cada dispositivo.",
     "Options": "Opciones",
-    "Out of Sync": "Fuera de sincronización",
-    "Out of Sync Items": "Ítems no sincronizados",
-    "Outgoing Rate Limit (KiB/s)": "Tasa máxima de envío (KiB/s)",
-    "Override Changes": "Reemplazar los cambios",
-    "Path": "Ruta",
-    "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Ruta del repositorio en el equipo local. Será creado si no existe. El carácter tilde (~) puede ser utilizado como atajo de ",
-    "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).": "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).",
-    "Path where versions should be stored (leave empty for the default .stversions folder in the folder).": "Ruta donde serán guardas las versiones (dejar vacío para usar el directorio predifinido \".stversions\" en el repositorio)",
-    "Pause": "Pausa",
-    "Pause All": "Todos en pausa",
-    "Paused": "En pausa",
-    "Please consult the release notes before performing a major upgrade.": "Por favor consulta las notas de lanzamiento antes de realizar una actualizacón mayor.",
-    "Please set a GUI Authentication User and Password in the Settings dialog.": "Por favor, establece un Usuario y Contraseña de Autenticación en la GUI en el diálogo de Configuración",
-    "Please wait": "Aguarde por favor",
+    "Out of Sync": "No sincronizado",
+    "Out of Sync Items": "Elementos no sincronizados",
+    "Outgoing Rate Limit (KiB/s)": "Límite de subida (KiB/s)",
+    "Override Changes": "Anular cambios",
+    "Path": "Parche",
+    "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Ruta a la carpeta en la máquina local. Se creará si no existe. El carácter de la tilde (~) puede usarse como atajo.",
+    "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).": "La ruta donde las versiones deben ser almacenadas (dejar vacío para el directorio .stversions por defecto en la carpeta compartida).",
+    "Path where versions should be stored (leave empty for the default .stversions folder in the folder).": "Ruta donde se almacenarán las versiones (dejar vacío para usar la carpeta por defecto \".stversions\").",
+    "Pause": "Pausar",
+    "Pause All": "Pausar todo",
+    "Paused": "Pausado",
+    "Please consult the release notes before performing a major upgrade.": "Por favor, consultar las notas de la versión antes de realizar una actualización importante.",
+    "Please set a GUI Authentication User and Password in the Settings dialog.": "Por favor, introduzca un Usuario y Contraseña para la Autenticación de la Interfaz de Usuario en el panel de Ajustes.",
+    "Please wait": "Por favor, espere",
+    "Prefix indicating that the file can be deleted if preventing directory removal": "Prefix indicating that the file can be deleted if preventing directory removal",
+    "Prefix indicating that the pattern should be matched without case sensitivity": "Prefix indicating that the pattern should be matched without case sensitivity",
     "Preview": "Vista previa",
-    "Preview Usage Report": "Ver reporte de uso",
-    "Quick guide to supported patterns": "Guía rápida sobre los patrones soportados",
-    "RAM Utilization": "Utilización de RAM",
+    "Preview Usage Report": "Informe de uso de vista previa",
+    "Quick guide to supported patterns": "Guía rápida de patrones soportados",
+    "RAM Utilization": "Uso de RAM",
     "Random": "Aleatorio",
-    "Reduced by ignore patterns": "(Restringido por patrones de exclusión)",
-    "Release Notes": "Notas de lanzamiento",
-    "Release candidates contain the latest features and fixes. They are similar to the traditional bi-weekly Syncthing releases.": "Las versiones preliminares contienen las últimas funcionalidades y los últimos correctivos. Son idénticas a las actualizaciones bimensuales tradicionales.",
+    "Reduced by ignore patterns": "Reducido por patrones de ignorar",
+    "Release Notes": "Notas de la versión",
+    "Release candidates contain the latest features and fixes. They are similar to the traditional bi-weekly Syncthing releases.": "Las versiones candidatas contienen las últimas funcionalidades y correcciones. Son similares a las tradicionales versiones bisemanales de Syncthing.",
     "Remote Devices": "Otros dispositivos",
     "Remove": "Eliminar",
-    "Required identifier for the folder. Must be the same on all cluster devices.": "Identificación requerida para la carpeta. Debe ser la misma en todos los dispositivos del grupo.",
-    "Rescan": "Reescanear",
-    "Rescan All": "Reescanear todo",
-    "Rescan Interval": "Intervalo de reescaneo",
+    "Required identifier for the folder. Must be the same on all cluster devices.": "Identificador requerido para la carpeta. Debe ser el mismo en todos los dispositivos del clúster.",
+    "Rescan": "Volver a analizar",
+    "Rescan All": "Volver a analizar Todo",
+    "Rescan Interval": "Intervalo de análisis",
     "Restart": "Reiniciar",
-    "Restart Needed": "Es necesario reiniciar",
+    "Restart Needed": "Reinicio necesario",
     "Restarting": "Reiniciando",
-    "Resume": "Reanudar",
-    "Resume All": "Reanudar todos",
+    "Resume": "Continuar",
+    "Resume All": "Continuar todo",
     "Reused": "Reutilizado",
     "Save": "Guardar",
-    "Scan Time Remaining": "Tiempo de Escaneo Restante",
-    "Scanning": "Actualización",
-    "Select the devices to share this folder with.": "Seleccione los dispositivos con los cuales compartir este repositorio.",
-    "Select the folders to share with this device.": "Seleccione los repositorios para compartir con este dispositivo.",
-    "Send & Receive": "Envío y recepción",
-    "Send Only": "Envío (lectura sola)",
-    "Settings": "Configuración",
+    "Scan Time Remaining": "Tiempo Restante de Escaneo",
+    "Scanning": "Analizando",
+    "Select the devices to share this folder with.": "Selecciona los dispositivos con los que compartir esta carpeta.",
+    "Select the folders to share with this device.": "Selecciona las carpetas para compartir con este dispositivo.",
+    "Send & Receive": "Enviar y Recibir",
+    "Send Only": "Solo Enviar",
+    "Settings": "Ajustes",
     "Share": "Compartir",
-    "Share Folder": "Compartir repositorio",
-    "Share Folders With Device": "Compartir repositorios con dispositivo",
-    "Share With Devices": "Compartir con los dispositivos",
-    "Share this folder?": "¿Compartir este repositorio?",
-    "Shared With": "Compartido con",
+    "Share Folder": "Compartir carpeta",
+    "Share Folders With Device": "Compartir carpetas con dispositivo",
+    "Share With Devices": "Compartir con dispositivos",
+    "Share this folder?": "¿Deseas compartir esta carpeta?",
+    "Shared With": "Compartir con",
     "Show ID": "Mostrar ID",
     "Show QR": "Mostrar QR",
-    "Shown instead of Device ID in the cluster status. Will be advertised to other devices as an optional default name.": "Mostrado en lugar de la ID del dispositivo en el estado del grupo. Será sugerido a otros dispositivos como nombre fácil de usar predeterminado opcional.",
-    "Shown instead of Device ID in the cluster status. Will be updated to the name the device advertises if left empty.": "Mostrado en lugar de la ID del dispositivo en el estado del grupo. Si se deja en blanco, será llenado por el nombre fácil de usar sugerido por el dispositivo.",
+    "Shown instead of Device ID in the cluster status. Will be advertised to other devices as an optional default name.": "Se muestra en lugar del ID del dispositivo en el estado del grupo (cluster). Se notificará a los otros dispositivos como nombre opcional por defecto.",
+    "Shown instead of Device ID in the cluster status. Will be updated to the name the device advertises if left empty.": "Se muestra en lugar del ID del dispositivo en el estado del grupo (cluster). Se actualizará al nombre que el dispositivo anuncia si se deja vacío.",
     "Shutdown": "Apagar",
-    "Shutdown Complete": "Apagado completado",
-    "Simple File Versioning": "Versiones simple de archivos",
-    "Single level wildcard (matches within a directory only)": "Carácter comodín de un solo nivel (coincide sólo dentro de un directorio)",
-    "Smallest First": "Más pequeño primero",
+    "Shutdown Complete": "Apagar completamente",
+    "Simple File Versioning": "Versionado simple de fichero",
+    "Single level wildcard (matches within a directory only)": "Comodín de nivel único (coincide solamente dentro de un directorio)",
+    "Smallest First": "El más pequeño primero",
     "Source Code": "Código fuente",
-    "Stable releases and release candidates": "Versiones stables y preliminares",
-    "Stable releases are delayed by about two weeks. During this time they go through testing as release candidates.": "Las versiones estables son trasladadas de cerca de dos semanas. Durante este tiempo son sometidas a un test como versiones preliminares.",
-    "Stable releases only": "Versiones estables solamente",
-    "Staggered File Versioning": "Versiones del archivo escalonado",
-    "Start Browser": "Iniciar navegador",
+    "Stable releases and release candidates": "Versiones estables y versiones candidatas",
+    "Stable releases are delayed by about two weeks. During this time they go through testing as release candidates.": "Las versiones estables son publicadas cada dos semanas. Durante este tiempo son probadas como versiones candidatas.",
+    "Stable releases only": "Solo versiones estables",
+    "Staggered File Versioning": "Versionado escalonado de fichero",
+    "Start Browser": "Iniciar el navegador",
     "Statistics": "Estadísticas",
-    "Stopped": "Parado",
+    "Stopped": "Detenido",
     "Support": "Forum",
-    "Sync Protocol Listen Addresses": "Dirección de escucha del protocolo de sincronización",
-    "Syncing": "Sincronización",
-    "Syncthing has been shut down.": "La sincronización esta apagada",
-    "Syncthing includes the following software or portions thereof:": "Syncthing incluye los siguientes softwares o partes de ellos:",
-    "Syncthing is restarting.": "Syncthing está reiniciando.",
+    "Sync Protocol Listen Addresses": "Direcciones de escucha del protocolo de sincronización",
+    "Syncing": "Sincronizando",
+    "Syncthing has been shut down.": "Syncthing se ha detenido.",
+    "Syncthing includes the following software or portions thereof:": "Syncthing incluye el siguiente software o partes de él:",
+    "Syncthing is restarting.": "Syncthing se está reiniciando.",
     "Syncthing is upgrading.": "Syncthing se está actualizando.",
-    "Syncthing seems to be down, or there is a problem with your Internet connection. Retrying…": "Syncthing parece estar apagado, o hay un problema con su conexión de Internet. Reintentando...",
-    "Syncthing seems to be experiencing a problem processing your request. Please refresh the page or restart Syncthing if the problem persists.": "Syncthing parece estar experimentando un problema al procesar su solicitud. Por favor, recargue el navegador o reinicie Syncthing si el problema persiste.",
-    "The Syncthing admin interface is configured to allow remote access without a password.": "La interfaz administrativa del Syncthing está configurada para permitir acceso remoto sin una contraseña.",
-    "The aggregated statistics are publicly available at the URL below.": "Las estadísticas agregadas están disponibles públicamente en la dirección de abajo.",
-    "The configuration has been saved but not activated. Syncthing must restart to activate the new configuration.": "La configuración ha sido guardada pero no activada.\nSyncthing debe reiniciarse para activar la nueva configuración.",
-    "The device ID cannot be blank.": "La ID del dispositivo no puede estar en blanco.",
-    "The device ID to enter here can be found in the \"Actions > Show ID\" dialog on the other device. Spaces and dashes are optional (ignored).": "La ID de dispositivo a introducir ser puede encontrar en el menú \"Acciones > Mostrar ID\" en el otro dispositivo. Espacios y guiones son opcionales (ignorados). ",
-    "The encrypted usage report is sent daily. It is used to track common platforms, folder sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.": "El informe de uso se envía encriptado diariamente. Se utiliza para hacer un seguimiento de plataformas comunes, tamaño de repositorios y versiones de la aplicación. Si el conjunto de datos cambia será notificado mediante este dialogo nuevamente.",
-    "The entered device ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.": "La ID del dispositivo introducida no es válida. Debe ser una cadena de 52 o 56 caracteres consistente en letras y números, con espacios y guiones opcionales.",
-    "The first command line parameter is the folder path and the second parameter is the relative path in the folder.": "El primer argumento es la ruta de la carpeta y el segundo argumento es la ruta relativa de esta carpeta.",
-    "The folder ID cannot be blank.": "La ID del repositorio no puede estar en blanco.",
-    "The folder ID must be unique.": "La ID del repositorio debe ser única.",
-    "The folder path cannot be blank.": "La ruta del repositorio no puede estar vacía.",
-    "The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.": "Los siguientes intervalos se utilizan: para la primera hora una versión se mantiene cada 30 segundos, para el primer día de una versión se mantiene cada hora, durante los primeros 30 días de la versión se mantiene todos los días, hasta que la edad máxima de una versión se mantiene cada semana.",
-    "The following items could not be synchronized.": "Los siguientes artículos no pueden ser sincronizados.",
-    "The maximum age must be a number and cannot be blank.": "La edad máxima debe ser un número y no puede estar en blanco.",
-    "The maximum time to keep a version (in days, set to 0 to keep versions forever).": "El tiempo máximo para mantener una versión (en días, establece en 0 para mantener versiones para siempre).",
-    "The minimum free disk space percentage must be a non-negative number between 0 and 100 (inclusive).": "El porcentaje de espacio libre en disco mínimo debe ser un número no negativo entre 0 y 100 (incluidos).",
-    "The number of days must be a number and cannot be blank.": "El número de días debe ser un número y no puede estar vacío.",
-    "The number of days to keep files in the trash can. Zero means forever.": "El tiempo máximo para mantener un archivo en el cubo de basura (en días, establece en 0 para mantener versiones para siempre).",
-    "The number of old versions to keep, per file.": "El numero de versiones anteriores a conservar, por archivo.",
+    "Syncthing seems to be down, or there is a problem with your Internet connection. Retrying…": "Syncthing parece no estar activo o hay un problema con tu conexión de internet. Reintentando...",
+    "Syncthing seems to be experiencing a problem processing your request. Please refresh the page or restart Syncthing if the problem persists.": "Syncthing tiene problemas para procesar tu solicitud. Por favor, actualiza la página o reinicia Syncthing si el problema persiste.",
+    "The Syncthing admin interface is configured to allow remote access without a password.": "El panel de administración de Syncthing está configurado para permitir el acceso remoto sin contraseña.",
+    "The aggregated statistics are publicly available at the URL below.": "Las estadísticas agragadas están disponibles públicamente en la URL de abajo.",
+    "The configuration has been saved but not activated. Syncthing must restart to activate the new configuration.": "La configuración ha sido grabada pero no activada. Syncthing debe reiniciarse para activar la nueva configuración.",
+    "The device ID cannot be blank.": "La ID del dispositivo no puede estar vacía.",
+    "The device ID to enter here can be found in the \"Actions > Show ID\" dialog on the other device. Spaces and dashes are optional (ignored).": "El ID del dispositivo que hay que introducir aquí se puede encontrar en el diálogo \"Acciones > Mostrar ID\" en el otro dispositivo. Los espacios y las barras son opcionales (ignorados).",
+    "The encrypted usage report is sent daily. It is used to track common platforms, folder sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.": "El informe encriptado de uso se envía diariamente. Se usa para rastrear plataformas comunes, tamaños de carpetas y versiones de la aplicación. Si el conjunto de datos enviados en el informes se cambia, se le pedirá a usted autorización de nuevo.",
+    "The entered device ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.": "La ID del dispositivo introducida no parece válida. Debe ser una cadena de 52 ó 56 caracteres formada por letras y números, con espacios y guiones opcionales.",
+    "The first command line parameter is the folder path and the second parameter is the relative path in the folder.": "El primer parámetro del comando es la ruta de la carpeta y el segundo es la ruta relativa en la carpeta.",
+    "The folder ID cannot be blank.": "La ID de la carpeta no puede estar vacía.",
+    "The folder ID must be unique.": "La ID de la carpeta debe ser única.",
+    "The folder path cannot be blank.": "La ruta de la carpeta no puede estar en blanco.",
+    "The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.": "Se utilizan los siguientes intervalos: para la primera hora se mantiene una versión cada 30 segundos, para el primer día se mantiene una versión cada hora, para los primeros 30 días se mantiene una versión diaria hasta la edad máxima de una semana.",
+    "The following items could not be synchronized.": "Los siguientes elementos no pueden ser sincronizados.",
+    "The maximum age must be a number and cannot be blank.": "La edad máxima debe ser un número y no puede estar vacía.",
+    "The maximum time to keep a version (in days, set to 0 to keep versions forever).": "El tiempo máximo para mantener una versión en días (introducir 0 para mantener las versiones indefinidamente).",
+    "The minimum free disk space percentage must be a non-negative number between 0 and 100 (inclusive).": "El porcentaje de espacio libre mínimo debe ser un número no negativo entre 0 y 100 (ambos inclusive).",
+    "The number of days must be a number and cannot be blank.": "El número de días debe ser un número y no puede estar en blanco.",
+    "The number of days to keep files in the trash can. Zero means forever.": "El número de días para mantener los archivos en la papelera. Cero significa \"para siempre\".",
+    "The number of old versions to keep, per file.": "El número de versiones a antiguas a mantener para cada fichero.",
     "The number of versions must be a number and cannot be blank.": "El número de versiones debe ser un número y no puede estar vacío.",
     "The path cannot be blank.": "La ruta no puede estar vacía.",
-    "The rate limit must be a non-negative number (0: no limit)": "El intervalo de reescaneo debe ser un número no negativo de segundos.  (0: no limit)",
-    "The rescan interval must be a non-negative number of seconds.": "El intervalo de reescaneo debe ser un número no negativo de segundos.",
-    "They are retried automatically and will be synced when the error is resolved.": "Los archivos se sincronizan automáticamente cuando el error se resuelve.",
+    "The rate limit must be a non-negative number (0: no limit)": "El límite de velocidad debe ser un número no negativo (0: sin límite)",
+    "The rescan interval must be a non-negative number of seconds.": "El intervalo de actualización debe ser un número positivo de segundos.",
+    "They are retried automatically and will be synced when the error is resolved.": "Se reintentarán de forma automática y se sincronizarán cuando se resuelva el error.",
     "This Device": "Este Dispositivo",
-    "This can easily give hackers access to read and change any files on your computer.": "Esto puede darle permiso a los hackers, podrán acceder a cualquier archivo, pudiéndolos leer y editar.",
-    "This is a major version upgrade.": "Esta es una actualización de version mayor.",
-    "This setting controls the free space required on the home (i.e., index database) disk.": "This setting controls the free space required on the home (i.e., index database) disk.",
-    "Time": "Tiempo",
-    "Trash Can File Versioning": "Versiones como cubo de basura",
+    "This can easily give hackers access to read and change any files on your computer.": "Esto podría permitir fácilmente el acceso a hackers para leer y modificar cualquier fichero de tu equipo.",
+    "This is a major version upgrade.": "Hay una actualización importante.",
+    "This setting controls the free space required on the home (i.e., index database) disk.": "Este ajuste controla el espacio libre necesario en el disco principal (por ejemplo, el índice de la base de datos).",
+    "Time": "Hora",
+    "Trash Can File Versioning": "Versionado de archivos de la papelera",
     "Type": "Tipo",
     "Unknown": "Desconocido",
     "Unshared": "No compartido",
-    "Unused": "No utilizado",
+    "Unused": "No usado",
     "Up to Date": "Actualizado",
     "Updated": "Actualizado",
     "Upgrade": "Actualizar",
     "Upgrade To {%version%}": "Actualizar a {{version}}",
     "Upgrading": "Actualizando",
-    "Upload Rate": "Tasa de subida",
-    "Uptime": "Tiempo en funcionamiento",
-    "Usage reporting is always enabled for candidate releases.": "Reportes anónimos de uso siempre estan enviados en las versions preliminares.",
-    "Use HTTPS for GUI": "Usar HTTPS para la GUI",
+    "Upload Rate": "Velocidad de subida",
+    "Uptime": "Tiempo de funcionamiento",
+    "Usage reporting is always enabled for candidate releases.": "El informe de uso está siempre habilitado en las versiones candidatas.",
+    "Use HTTPS for GUI": "Usar HTTPS para la Interfaz Gráfica de Usuario (GUI)",
     "Version": "Versión",
-    "Versions Path": "Ruta de versiones",
-    "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "Las versiones se eliminan automáticamente si son mayores de la edad máxima o mayor que el número de archivos permitidos en un intervalo.",
-    "Warning, this path is a parent directory of an existing folder \"{%otherFolder%}\".": "Atención, esta ruta es un repertorio allegado por lo menos de un reparto existente (por ejemplo \" {{otherFolder}} \"). Si usted continúa, usted debería crear un nuevo subdirectorio, si no esto puede causar problemas tales como duplicaciones y/o supresiones intempestivas de ficheros.",
-    "Warning, this path is a parent directory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Atención, esta ruta es un repertorio allegado por lo menos de un reparto existente (por ejemplo \" {{otherFolderLabel}} \" ({{otherFolder}})). Si usted continúa, usted debería crear un nuevo subdirectorio, si no esto puede causar problemas tales como duplicaciones y/o supresiones intempestivas de ficheros.",
-    "Warning, this path is a subdirectory of an existing folder \"{%otherFolder%}\".": "Atención, esta dirección es un subdirectorio de un directorio existente \"{{otherFolder}}\".",
-    "Warning, this path is a subdirectory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "ATENCIÓN, esta ruta es un subdirectorio del reparto existente \" {{otherFolderLabel}} \" ({{otherFolder}}). Esto puede causar problemas tales como duplicaciones y/o supresiones intempestivas de ficheros.",
-    "When adding a new device, keep in mind that this device must be added on the other side too.": "Al agregar un nuevo dispositivo, tenga en cuenta que este dispositivo se debe agregar en el otro lado también.",
-    "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Al agregar un nuevo repositorio, tenga en cuenta que la ID del repositorio se utiliza para conectar los repositorios entre dispositivos. Se distingue entre mayúsculas y minúsculas y debe ser exactamente igual en todos los dispositivos.",
-    "Yes": "Sí",
-    "You can change your choice at any time in the Settings dialog.": "Usted puede cambiar su elección en el cuadro de diálogo Configuración.",
-    "You can read more about the two release channels at the link below.": "Usted puede saber más sobre ambos canales de distribución vía el lazo más abajo.",
-    "You must keep at least one version.": "Debe mantener al menos una versión",
+    "Versions Path": "Ruta de las versiones",
+    "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "Las versiones se borran automáticamente si son más antiguas que la edad máxima o exceden el número de ficheros permitidos en un intervalo.",
+    "Warning, this path is a parent directory of an existing folder \"{%otherFolder%}\".": "¡Peligro! Esta ruta es un directorio principal de la carpeta ya existente \"{{otherFolder}}\".",
+    "Warning, this path is a parent directory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "'Peligro! Esta ruta es un subdirectorio de la carpeta ya existente \"{{otherFolderLabel}}\"  ({{otherFolder}}).",
+    "Warning, this path is a subdirectory of an existing folder \"{%otherFolder%}\".": "Peligro! Esta ruta es un subdirectorio de una carpeta ya existente llamada \"{{otherFolder}}\".",
+    "Warning, this path is a subdirectory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Peligro, esta ruta es un subdirectorio de una carpeta ya existente llamada \"{{otherFolderLabel}}\" ({{otherFolder}}).",
+    "When adding a new device, keep in mind that this device must be added on the other side too.": "Cuando añada un nuevo dispositivo, tenga en cuenta que este debe añadirse también en el otro lado.",
+    "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Cuando añada una nueva carpeta, tenga en cuenta que su ID se usa para unir carpetas entre dispositivos. Son sensibles a las mayúsculas y deben coincidir exactamente entre todos los dispositivos.",
+    "Yes": "Si",
+    "You can also select one of these nearby devices:": "You can also select one of these nearby devices:",
+    "You can change your choice at any time in the Settings dialog.": "Puedes cambiar tu elección en cualquier momento en el panel de Ajustes.",
+    "You can read more about the two release channels at the link below.": "Puedes leer más sobre los dos método de publicación de versiones en el siguiente enlace.",
+    "You must keep at least one version.": "Debes mantener al menos una versión.",
     "days": "días",
     "directories": "directorios",
     "files": "archivos",
-    "full documentation": "documentación completa",
-    "items": "ítems",
-    "{%device%} wants to share folder \"{%folder%}\".": "{{device}} quiere compartir repositorio \"{{folder}}\".",
+    "full documentation": "Documentación completa",
+    "items": "Elementos",
+    "{%device%} wants to share folder \"{%folder%}\".": "{{device}} quiere compartir la carpeta \"{{folder}}\".",
     "{%device%} wants to share folder \"{%folderlabel%}\" ({%folder%}).": "{{device}} quiere compartir la carpeta \"{{folderlabel}}\" ({{folder}})."
 }

gui/default/assets/lang/lang-eu.json

@@ -9,7 +9,7 @@
     "Add": "Gehitu",
     "Add Device": "Tresna gehitu",
     "Add Folder": "Karpeta gehitu",
-    "Add Remote Device": "Urruneko tresna bat gehitu",
+    "Add Remote Device": "Urrundikako tresna bat gehitu",
     "Add devices from the introducer to our device list, for mutually shared folders.": "Gure tresna zerrendan tresnak gehitzea baimendu, partekatzeetan.",
     "Add new folder?": "Karpeta berria gehitu?",
     "Address": "Helbidea",
@@ -44,19 +44,19 @@
     "Copied from original": "Jatorrizkotik kopiatua",
     "Copyright © 2014-2016 the following Contributors:": "Copyright 2014-2016, ekarle hauk:",
     "Copyright © 2014-2017 the following Contributors:": "Copyright 2014-2017, ekarle hauk:",
-    "Creating ignore patterns, overwriting an existing file at {%path%}.": "Baztertze modelo batzuen sortzea, den fitxategiari ordaina ezartzea: {{bidea}}",
+    "Creating ignore patterns, overwriting an existing file at {%path%}.": "Baztertze modelo batzuen sortzea, dagoen fitxategiari ordaina ezartzea: {{path}}",
     "Danger!": "Lanjera !",
     "Deleted": "Kendua",
     "Device": "Tresna",
-    "Device \"{%name%}\" ({%device%} at {%address%}) wants to connect. Add new device?": "Tresna \"{{name}}\" ({{device}}{{address}} era) konektatu nahi du. Onhartzen duzu? ?",
+    "Device \"{%name%}\" ({%device%} at {%address%}) wants to connect. Add new device?": "Tresna \"{{name}}\" ({{device}} {{address}} era) konektatu nahi du. Onhartzen duzu ?",
     "Device ID": "Tresnaren ID-a",
     "Device Identification": "Tresnaren identifikazioa",
     "Device Name": "Tresnaren izena",
     "Devices": "Tresnak",
     "Disconnected": "Deskonektatua",
     "Discovered": "Agertua",
-    "Discovery": "Aurkikuntza",
-    "Discovery Failures": "Hutsegiteak",
+    "Discovery": "Agertzea",
+    "Discovery Failures": "Agertze hutsegiteak",
     "Documentation": "Dokumentazioa",
     "Download Rate": "Deskargatzearen bit-tasa",
     "Downloaded": "Deskargatua",
@@ -65,13 +65,13 @@
     "Edit Device": "Tresna aldatzea",
     "Edit Folder": "Partekatze aldatzea",
     "Editing": "Aldaketak",
-    "Editing {%path%}.": "Muntatzea {{bidea}}",
+    "Editing {%path%}.": "Muntatzea {{path}}",
     "Enable NAT traversal": "NAT translazioa aktibatu",
     "Enable Relaying": "Aldizkatzea posible",
-    "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Negatiboa ez den zenbaki bat hauta ezazu (\"2.35\" adib.) eta unitate bat hauta. Disko osoaren espazio ehunekoa",
+    "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Negatiboa ez den zenbaki bat hauta ezazu (\"2.35\" adib.) bai eta unitate bat. Disko osoaren  ehuneko espazioa",
     "Enter a non-privileged port number (1024 - 65535).": "Abantailatua ez den portu zenbalki bat sar ezazu (1024 - 65535)",
-    "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": " (\"tcp://ip:ataka\", \"tcp://izena:ataka\") zuzenbideak sar, krakotx batez separatuak edo bestenaz \"dynamic\", zuzenbidearen xekatze automatikoa aktibatzeko\nTu peux traduire nom et port mot à mot dans la parenthèse, c'est pas des variables du programme, juste du texte explicatif",
-    "Enter ignore patterns, one per line.": "Ezkluzio filtroak sar, lerro batean bakar bat",
+    "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": " (\"tcp://ip:ataka\", \"tcp://izena:ataka\") zuzenbideak sar, krakotx batez separatuak edo bestenaz \"dynamic\", zuzenbidearen xekatze automatikoa aktibatzeko",
+    "Enter ignore patterns, one per line.": "Ezkluzio filtroak sar, lerro bakoitzean bat bakarrik.",
     "Error": "Hutsa",
     "External File Versioning": "Fitxategi bertsioen kanpoko kudeaketa",
     "Failed Items": "Huts egin duten fitxategiak",
@@ -81,7 +81,7 @@
     "File permission bits are ignored when looking for changes. Use on FAT file systems.": "Aldaketa bilaketetan, fitxeroen baimen bitak ez dira kontuan hartuko. Fitxero FAT sistimetan erabilia.",
     "Files are moved to .stversions directory when replaced or deleted by Syncthing.": "Fitxategiak .stbersioak errepertorioan lekutuak dira, Syncthing-ek ordezkatzen edo kentzen dituelarik",
     "Files are moved to .stversions folder when replaced or deleted by Syncthing.": ".stbersioak azpi karpetan lekutuko dira fitxeroak, Syncthing-ek aldatu edo ezeztatuko dituelarik. Beren helbide errelatiboak hor berean berriz sortuak izanen dira, behar balin bada",
-    "Files are moved to date stamped versions in a .stversions directory when replaced or deleted by Syncthing.": "Files are moved to date stamped versions in a .stversions directory when replaced or deleted by Syncthing.",
+    "Files are moved to date stamped versions in a .stversions directory when replaced or deleted by Syncthing.": "Syncthing-ek aldatzen edo kentzen dituelarik, fitxeroak \".stbertsioak\" peko-errepertoriorat lekutuak dira, jatorrizkoaren berdin berdina den zuhaitz-formako batean",
     "Files are moved to date stamped versions in a .stversions folder when replaced or deleted by Syncthing.": ".stbersioak azpi karpetan lekutuko eta ordu-markatuko dira fitxeroak, egitura errelatibo berdin batean, Syncthing-ek aldatu edo ezeztatuko dituelarik.",
     "Files are protected from changes made on other devices, but changes made on this device will be sent to the rest of the cluster.": "Beste tresnetan eginak izanen diren aldaketetatik zainduak izanen dira fitxeroak; haatik, tresna huntan egindako aldaketak besteeri hedatuak izanen dira.",
     "Folder": "Partekatze",
@@ -158,6 +158,8 @@
     "Please consult the release notes before performing a major upgrade.": "Aktualizatze garrantzitsu bat egin baino lehen, bertsioaren oharrak begira itzazu.",
     "Please set a GUI Authentication User and Password in the Settings dialog.": "Konfigurazio leihoan asma itzazu erabiltzale izen bat eta pasahitz bat",
     "Please wait": "Pazientzia pixka bat, otoi",
+    "Prefix indicating that the file can be deleted if preventing directory removal": "Prefix indicating that the file can be deleted if preventing directory removal",
+    "Prefix indicating that the pattern should be matched without case sensitivity": "Prefix indicating that the pattern should be matched without case sensitivity",
     "Preview": "Aurrebista",
     "Preview Usage Report": "Erabiltze estatistika txostenaren aurrebista",
     "Quick guide to supported patterns": "Eredu konpatibleen gidaliburuxka",
@@ -165,7 +167,7 @@
     "Random": "Aleatorioa",
     "Reduced by ignore patterns": "Baztertze eredu batzuk mugatuak",
     "Release Notes": "Bertsioen notak",
-    "Release candidates contain the latest features and fixes. They are similar to the traditional bi-weekly Syncthing releases.": "Release candidates contain the latest features and fixes. They are similar to the traditional bi-weekly Syncthing releases.",
+    "Release candidates contain the latest features and fixes. They are similar to the traditional bi-weekly Syncthing releases.": "Azken zuzenketak eta funtzionalitateak edukitzen dituzte aitzin-bertsioek. Bi hilabete guziz egiten diren eguneratzeen berdinak dira.",
     "Remote Devices": "Beste tresnak",
     "Remove": "Kendu",
     "Required identifier for the folder. Must be the same on all cluster devices.": "Partekatzearen erabilzaile izena. Dauden tresna guzietan berdin berdina izan behar du",
@@ -255,7 +257,7 @@
     "Up to Date": "Eguneratua",
     "Updated": "Berritua",
     "Upgrade": "Aktualizatu",
-    "Upgrade To {%version%}": "Egunetaratu {{bertsio}}-ari buruz",
+    "Upgrade To {%version%}": "Egunetaratu {{version}}-ari buruz",
     "Upgrading": "Syncthing-en egunetaratzea",
     "Upload Rate": "Igortze emaria",
     "Uptime": "Erabiltze denbora",
@@ -264,13 +266,14 @@
     "Version": "Bertsioa",
     "Versions Path": "Bertsioen kokalekua",
     "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "Bertsioak automatikoki ezeztatuak izanen dira, kontserbatzeko iraupen denbora pasatua badute edo bitartean onartua den kopurua (fitxategi bakoitzean) gainditua balin bada",
-    "Warning, this path is a parent directory of an existing folder \"{%otherFolder%}\".": "Kasu, bide hau dagoen partekatze baten karpeta ahaidea da  (adibidez, \" {{BestePartekatze}}\"). Segitzen baduzu, azpi-karpeta berri bat sortu behar duzu, bestenaz arazoak sortzen ahal dira, fitxategi  kentzeak edo doblatzeak.",
-    "Warning, this path is a parent directory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Kasu, bide hau dagoen partekatze baten karpeta ahaidea da  (adibidez, \"{{BestePartekatzeLabela}}\" ({{BestePartekatze}}). ",
-    "Warning, this path is a subdirectory of an existing folder \"{%otherFolder%}\".": "Kasu, bide hau \"{{BestePartekatze}}\" partekatzearen azpi-karpeta da. Arazoak emaiten ahal ditu, fitxategi kentzeak edo doblatzeak, adibidez.",
-    "Warning, this path is a subdirectory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Kasu, bide hau \"{{BestePartekatzeLabela}}\" ({{BestePartekatze}}) partekatzearen azpi-karpeta da. Arazoak emaiten ahal ditu, fitxategi kentzeak edo doblatzeak, adibidez.",
+    "Warning, this path is a parent directory of an existing folder \"{%otherFolder%}\".": "Kasu, bide hau dagoen partekatze baten karpeta ahaidea da  (adibidez, \"{{otherFolder}}\"). Segitzen baduzu, azpi-karpeta berri bat sortu behar duzu, bestenaz arazoak sortzen ahal dira, fitxategi  kentzeak edo doblatzeak.",
+    "Warning, this path is a parent directory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Kasu, bide hau dagoen partekatze baten karpeta ahaidea da  (adibidez, \"{{otherFolderLabel}}\" ({{otherFolder}}). ",
+    "Warning, this path is a subdirectory of an existing folder \"{%otherFolder%}\".": "Kasu, bide hau \"{{otherFolder}}\" partekatzearen azpi-karpeta da. Arazoak emaiten ahal ditu, fitxategi kentzeak edo doblatzeak, adibidez.",
+    "Warning, this path is a subdirectory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Kasu, bide hau \"{{otherFolderLabel}}\" ({{otherFolder}}) partekatzearen azpi-karpeta da. Arazoak emaiten ahal ditu, fitxategi kentzeak edo doblatzeak, adibidez.",
     "When adding a new device, keep in mind that this device must be added on the other side too.": "Tresna bat gehitzen duzularik, gogoan atxik ezazu zurea bestaldean gehitu behar dela ere",
     "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Partekatze bat gehitzen delarik, gogoan atxik ezazu bere IDa erabilia dela errepertorioak lotzeko tresnen bitartez. ID-a hautskorra da eta partekatze hontan parte hartzen duten tresna guzietan berdina izan behar du.",
     "Yes": "Bai",
+    "You can also select one of these nearby devices:": "You can also select one of these nearby devices:",
     "You can change your choice at any time in the Settings dialog.": "Zure hautua aldatzen ahal duzu \"Konfigurazio\" leihatilan",
     "You can read more about the two release channels at the link below.": "Bi banaketa kanal hauen bidez gehiago jakin dezakezu, lokarri honen bidez ",
     "You must keep at least one version.": "Bertsio bat bederen behar duzu atxiki",
@@ -279,6 +282,6 @@
     "files": "Fitxategiak",
     "full documentation": "Dokumentazio osoa",
     "items": "Elementuak",
-    "{%device%} wants to share folder \"{%folder%}\".": "{{Tresna}}-k \"{{folder}}\" partekatze hontan gomitatzen zaitu.",
-    "{%device%} wants to share folder \"{%folderlabel%}\" ({%folder%}).": "{{Tresna}}-ak  \"{{PartekatzeLabela}}\" ({{Partekatze}}) hontan gomitatzen zaitu."
+    "{%device%} wants to share folder \"{%folder%}\".": "{{device}}k \"{{folder}}\" partekatze hontan gomitatzen zaitu.",
+    "{%device%} wants to share folder \"{%folderlabel%}\" ({%folder%}).": "{{device}}k  \"{{folderlabel}}\" ({{folder}}) hontan gomitatzen zaitu."
 }

gui/default/assets/lang/lang-fi.json

@@ -158,6 +158,8 @@
     "Please consult the release notes before performing a major upgrade.": "Tutustu julkaisutietoihin ennen kuin teet pääversion päivityksen.",
     "Please set a GUI Authentication User and Password in the Settings dialog.": "Ole hyvä ja aseta käyttäjätunnus ja salasana käyttöliittymää varten asetusvalikossa.",
     "Please wait": "Ole hyvä ja odota",
+    "Prefix indicating that the file can be deleted if preventing directory removal": "Prefix indicating that the file can be deleted if preventing directory removal",
+    "Prefix indicating that the pattern should be matched without case sensitivity": "Prefix indicating that the pattern should be matched without case sensitivity",
     "Preview": "Esikatselu",
     "Preview Usage Report": "Esikatsele käyttöraportti",
     "Quick guide to supported patterns": "Tuettujen lausekkeiden pikaohje",
@@ -271,6 +273,7 @@
     "When adding a new device, keep in mind that this device must be added on the other side too.": "Lisättäessä laitetta, muista että tämä laite tulee myös lisätä toiseen laitteeseen.",
     "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Lisättäessä uutta kansiota, muista että kansion ID:tä käytetään solmimaan kansiot yhteen laitteiden välillä. Ne ovat riippuvaisia kirjankoosta ja niiden tulee täsmätä kaikkien laitteiden välillä.",
     "Yes": "Kyllä",
+    "You can also select one of these nearby devices:": "You can also select one of these nearby devices:",
     "You can change your choice at any time in the Settings dialog.": "You can change your choice at any time in the Settings dialog.",
     "You can read more about the two release channels at the link below.": "You can read more about the two release channels at the link below.",
     "You must keep at least one version.": "Sinun tulee säilyttää ainakin yksi versio.",

gui/default/assets/lang/lang-fr-CA.json

@@ -158,6 +158,8 @@
     "Please consult the release notes before performing a major upgrade.": "Veuillez consulter les notes de version avant de réaliser une mise à jour majeure.",
     "Please set a GUI Authentication User and Password in the Settings dialog.": "Veuillez définir un nom d'utilisateur et un mot de passe dans les réglages.",
     "Please wait": "Merci de patienter",
+    "Prefix indicating that the file can be deleted if preventing directory removal": "Prefix indicating that the file can be deleted if preventing directory removal",
+    "Prefix indicating that the pattern should be matched without case sensitivity": "Prefix indicating that the pattern should be matched without case sensitivity",
     "Preview": "Aperçu",
     "Preview Usage Report": "Aperçu du rapport de statistiques d'utilisation",
     "Quick guide to supported patterns": "Guide rapide des masques compatibles ci-dessous",
@@ -271,6 +273,7 @@
     "When adding a new device, keep in mind that this device must be added on the other side too.": "Lorsque vous ajoutez un appareil, gardez à l'esprit que le votre doit aussi être ajouté de l'autre coté.",
     "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Lorsqu'un nouveau partage est ajouté, gardez à l'esprit que son ID est utilisée pour lier les répertoires à travers les appareils. L'ID est sensible à la casse et sera forcément la même sur tous les appareils participant à ce partage.",
     "Yes": "Oui",
+    "You can also select one of these nearby devices:": "You can also select one of these nearby devices:",
     "You can change your choice at any time in the Settings dialog.": "Vous pouvez changer votre choix dans la boîte de dialogue \"Configuration\".",
     "You can read more about the two release channels at the link below.": "Vous pouvez en savoir plus sur les deux canaux de distribution via le lien ci-dessous.",
     "You must keep at least one version.": "Vous devez garder au minimum une version.",

gui/default/assets/lang/lang-fr.json

@@ -1,5 +1,5 @@
 {
-    "A device with that ID is already added.": "L'appareil portant cette ID est déjà présent.",
+    "A device with that ID is already added.": "L'appareil portant cet ID est déjà présent.",
     "A negative number of days doesn't make sense.": "Ce champ n'accepte qu'un entier positif ou nul.",
     "A new major version may not be compatible with previous versions.": "Une nouvelle version majeure peut présenter des incompatibilités avec les versions antérieures.",
     "API Key": "Clé API",
@@ -37,7 +37,7 @@
     "Command": "Commande",
     "Comment, when used at the start of a line": "Commentaire lorsque utilisé en début de ligne",
     "Compression": "Compression",
-    "Configured": "Configuré",
+    "Configured": "Configurée",
     "Connection Error": "Erreur de connexion",
     "Connection Type": "Type de connexion",
     "Copied from elsewhere": "Copié d'ailleurs",
@@ -48,7 +48,7 @@
     "Danger!": "Attention !",
     "Deleted": "Supprimé",
     "Device": "Appareil",
-    "Device \"{%name%}\" ({%device%} at {%address%}) wants to connect. Add new device?": "L'appareil \"{{name}}\" ({{device}} à {{address}}) veut se connecter. L'acceptez-vous ?",
+    "Device \"{%name%}\" ({%device%} at {%address%}) wants to connect. Add new device?": "\"{{name}}\" ({{device}}), actuellement à {{address}}, demande à se connecter.\nAcceptez-vous de l'ajouter à votre liste d'appareils connus ?",
     "Device ID": "ID de l'appareil",
     "Device Identification": "Identifiant de l'appareil",
     "Device Name": "Nom de l'appareil",
@@ -158,6 +158,8 @@
     "Please consult the release notes before performing a major upgrade.": "Veuillez consulter les notes de version avant de réaliser une mise à jour majeure.",
     "Please set a GUI Authentication User and Password in the Settings dialog.": "Veuillez définir un nom d'utilisateur et un mot de passe dans la fenêtre de Configuration.",
     "Please wait": "Merci de patienter",
+    "Prefix indicating that the file can be deleted if preventing directory removal": "Ce préfixe autorise la suppression des fichiers pour permettre la suppression de répertoires.",
+    "Prefix indicating that the pattern should be matched without case sensitivity": "Ce préfixe, inutile sur Windows et Mac OS, indique que le masque d'exclusion est insensible à la casse.",
     "Preview": "Aperçu",
     "Preview Usage Report": "Aperçu du rapport de statistiques d'utilisation",
     "Quick guide to supported patterns": "Guide rapide des masques compatibles ci-dessous",
@@ -264,13 +266,14 @@
     "Version": "Version",
     "Versions Path": "Emplacement des versions",
     "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "Les plus anciennes versions seront supprimées automatiquement quand elles dépassent la durée maximum de conservation ou si leur nombre (par fichier) est supérieur à la limite prédéfinie pour l'intervalle.",
-    "Warning, this path is a parent directory of an existing folder \"{%otherFolder%}\".": "Attention, ce chemin est un répertoire parent d'au moins un partage existant (par exemple \"{{otherFolder}}\"). Si vous continuez, vous devriez créer un nouveau sous-répertoire, sinon ceci peut causer des problèmes tels que duplications et/ou suppressions intempestives de fichiers.",
+    "Warning, this path is a parent directory of an existing folder \"{%otherFolder%}\".": "Attention, ce chemin est un répertoire parent d'au moins un partage existant (par exemple \"{{otherFolder}}\"). Si c'est bien ce que vous souhaitez, vous devriez créer un nouveau sous-répertoire, sinon ceci peut causer des problèmes tels que duplications et/ou suppressions intempestives de fichiers.",
     "Warning, this path is a parent directory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Attention, ce chemin est un répertoire parent d'au moins un partage existant (par exemple \"{{otherFolderLabel}}\" ({{otherFolder}})). Si vous continuez, vous devriez créer un nouveau sous-répertoire, sinon ceci peut causer des problèmes tels que duplications et/ou suppressions intempestives de fichiers.",
     "Warning, this path is a subdirectory of an existing folder \"{%otherFolder%}\".": "ATTENTION, ce chemin est un sous-répertoire du partage existant \"{{otherFolder}}\". Ceci peut causer des problèmes tels que duplications et/ou suppressions intempestives de fichiers.",
     "Warning, this path is a subdirectory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "ATTENTION, ce chemin est un sous-répertoire du partage existant \"{{otherFolderLabel}}\" ({{otherFolder}}). Ceci peut causer des problèmes tels que duplications et/ou suppressions intempestives de fichiers.",
     "When adding a new device, keep in mind that this device must be added on the other side too.": "Lorsque vous ajoutez un appareil, gardez à l'esprit que le votre doit aussi être ajouté de l'autre coté.",
     "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Lorsqu'un nouveau partage est ajouté, gardez à l'esprit que son ID est utilisée pour lier les répertoires à travers les appareils. L'ID est sensible à la casse et sera forcément la même sur tous les appareils participant à ce partage.",
     "Yes": "Oui",
+    "You can also select one of these nearby devices:": "Vous pouvez également sélectionner l'un de ces appareils proches :",
     "You can change your choice at any time in the Settings dialog.": "Vous pouvez changer votre choix dans la boîte de dialogue \"Configuration\".",
     "You can read more about the two release channels at the link below.": "Vous pouvez en savoir plus sur les deux canaux de distribution via le lien ci-dessous.",
     "You must keep at least one version.": "Vous devez garder au minimum une version.",

gui/default/assets/lang/lang-fy.json

@@ -75,7 +75,7 @@
     "Error": "Flater",
     "External File Versioning": "Ekstern ferzjebehear foar triemen",
     "Failed Items": "Mislearre items",
-    "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "Konneksje mei IPv6-tsjinners wol lykwols net slagje sûnder IPv6-ferbining is.",
+    "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": " Mislearjen fan it ferbinen mei IPv6-tsjinners wurd ferwachte as der gjin stipe foar IPv6-ferbinings is.",
     "File Pull Order": "Triemlûkfolchoarder",
     "File Versioning": "Triemferzjebehear",
     "File permission bits are ignored when looking for changes. Use on FAT file systems.": "Bits foar triemrjochten wurde negearre yn it sykjen foar feroarings. Brûk dit op FAT-triemsystemen.",
@@ -158,6 +158,8 @@
     "Please consult the release notes before performing a major upgrade.": "Foardat jo in wichtige fernijing ynstallearre, graach earst de fernijingsoantekenings lêze.",
     "Please set a GUI Authentication User and Password in the Settings dialog.": "Graach foar GUI-ferifikaasje in brûkers-ID en wachtwurd ynstelle yn it ynstellingsdialooch.",
     "Please wait": "In amerijke",
+    "Prefix indicating that the file can be deleted if preventing directory removal": "Prefiks dy't oanjout dat de triem fourtsmiten wurde kin wannear dit it ferwiderjen belet.",
+    "Prefix indicating that the pattern should be matched without case sensitivity": "Prefiks dy't oanjout dat fergelykings mei it patroans net haadlettergefoelich wêze sille.",
     "Preview": "Foarbyld",
     "Preview Usage Report": "Foarbyld fan brûkensrapport ",
     "Quick guide to supported patterns": "Fluch-paadwizer foar stipe patroanen",
@@ -271,6 +273,7 @@
     "When adding a new device, keep in mind that this device must be added on the other side too.": "Hâld by it taheakjen fan in nij apparaat yn de holle dat it apparaat oan de oare kant ek taheakke wurde moat. ",
     "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Hâld by it taheakjen fan in nije map yn de holle dat de map-ID brûkt wurd om de mappen tusken apparaten mei-inoar te ferbinen. Se binne haadlettergefoelich en moatte oer alle apparaten eksakt oerienkomme.",
     "Yes": "Ja",
+    "You can also select one of these nearby devices:": "Jo kinne ek ien fan dizze tichtbye apparaten selektearje:",
     "You can change your choice at any time in the Settings dialog.": "Jo kinne jo kar op elk stuit oanpasse yn it Ynstellingsdialooch.",
     "You can read more about the two release channels at the link below.": "Jo kinne mear lêze oer de twa útjeftekanalen fia de ûndersteande link.",
     "You must keep at least one version.": "Jo moatte minstens ien ferzje bewarje.",

gui/default/assets/lang/lang-hu.json

@@ -158,6 +158,8 @@
     "Please consult the release notes before performing a major upgrade.": "Nagyobb frissítés előtt ellenőrizni kell a kiadási megjegyzéseket.",
     "Please set a GUI Authentication User and Password in the Settings dialog.": "Be kell állítani a grafikus felület felhasználónevét és jelszavát a Beállítások párbeszédablakban.",
     "Please wait": "Türelem",
+    "Prefix indicating that the file can be deleted if preventing directory removal": "Előtag, amely jelzi, hogy a fájl törölhető, ha tiltva van a mappák eltávolítása",
+    "Prefix indicating that the pattern should be matched without case sensitivity": "Előtag, amely jelzi, hogy a mintát nagy- ill. kisbetűérzékenység nélkül kell illeszteni.",
     "Preview": "Előnézet",
     "Preview Usage Report": "Használati jelentés áttekintése",
     "Quick guide to supported patterns": "Rövid útmutató a használható mintákról",
@@ -271,6 +273,7 @@
     "When adding a new device, keep in mind that this device must be added on the other side too.": "Új eszköz hozzáadásakor nem szabad elfeledkezni arról, hogy a másik oldalon ezt az eszközt is hozzá kell adni.",
     "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Új eszköz hozzáadásakor észben kell tartani, hogy a mappaazonosító arra való, hogy összekösse a mappákat az eszközökön. Az azonosító kisbetű-nagybetű érzékeny és pontosan egyeznie kell az eszközökön.",
     "Yes": "Igen",
+    "You can also select one of these nearby devices:": "Az alábbi közelben lévő eszközök közül lehet választani:",
     "You can change your choice at any time in the Settings dialog.": "A beállításoknál bármikor módosíthatod a választásodat.",
     "You can read more about the two release channels at the link below.": "A két kiadási csatornáról az alábbi linken olvashatsz további információkat.",
     "You must keep at least one version.": "Legalább egy verziót meg kell tartani.",

gui/default/assets/lang/lang-id.json

@@ -158,6 +158,8 @@
     "Please consult the release notes before performing a major upgrade.": "Please consult the release notes before performing a major upgrade.",
     "Please set a GUI Authentication User and Password in the Settings dialog.": "Please set a GUI Authentication User and Password in the Settings dialog.",
     "Please wait": "Please wait",
+    "Prefix indicating that the file can be deleted if preventing directory removal": "Prefix indicating that the file can be deleted if preventing directory removal",
+    "Prefix indicating that the pattern should be matched without case sensitivity": "Prefix indicating that the pattern should be matched without case sensitivity",
     "Preview": "Preview",
     "Preview Usage Report": "Preview Usage Report",
     "Quick guide to supported patterns": "Quick guide to supported patterns",
@@ -271,6 +273,7 @@
     "When adding a new device, keep in mind that this device must be added on the other side too.": "When adding a new device, keep in mind that this device must be added on the other side too.",
     "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.",
     "Yes": "Yes",
+    "You can also select one of these nearby devices:": "You can also select one of these nearby devices:",
     "You can change your choice at any time in the Settings dialog.": "You can change your choice at any time in the Settings dialog.",
     "You can read more about the two release channels at the link below.": "You can read more about the two release channels at the link below.",
     "You must keep at least one version.": "You must keep at least one version.",

gui/default/assets/lang/lang-it.json

@@ -69,7 +69,7 @@
     "Enable NAT traversal": "Abilita NAT traversal",
     "Enable Relaying": "Abilita Reindirizzamento",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Inserisci un numero non negativo (ad esempio \"2.35\") e seleziona un'unità. Le percentuali sono parte della dimensione totale del disco.",
-    "Enter a non-privileged port number (1024 - 65535).": "Enter a non-privileged port number (1024 - 65535).",
+    "Enter a non-privileged port number (1024 - 65535).": "Inserisci un numero di porta non-privilegiata (1024 - 65535).",
     "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Inserisci indirizzi separati da virgola (\"tcp://ip:porta\", \"tcp://host:porta\")  oppure \"dynamic\" per effettuare il rilevamento automatico dell'indirizzo.",
     "Enter ignore patterns, one per line.": "Inserisci gli schemi di esclusione, uno per riga.",
     "Error": "Errore",
@@ -93,7 +93,7 @@
     "GUI": "Interfaccia Grafica Utente",
     "GUI Authentication Password": "Password dell'Interfaccia Grafica",
     "GUI Authentication User": "Utente dell'Interfaccia Grafica",
-    "GUI Listen Address": "GUI Listen Address",
+    "GUI Listen Address": "Indirizzo dell'Interfaccia Grafica",
     "GUI Listen Addresses": "Indirizzi dell'Interfaccia Grafica",
     "GUI Theme": "Tema GUI",
     "Generate": "Genera",
@@ -158,6 +158,8 @@
     "Please consult the release notes before performing a major upgrade.": "Si prega di consultare le note di rilascio prima di eseguire un aggiornamento principale.",
     "Please set a GUI Authentication User and Password in the Settings dialog.": "Per favore impostare Utente e Password dell'Interfaccia Grafica nelle Impostazioni.",
     "Please wait": "Attendere prego",
+    "Prefix indicating that the file can be deleted if preventing directory removal": "Prefisso che indica che il file può essere eliminato se impedisce la rimozione della cartella",
+    "Prefix indicating that the pattern should be matched without case sensitivity": "Prefisso che indica che lo schema deve essere abbinato senza tener conto delle maiuscole",
     "Preview": "Anteprima",
     "Preview Usage Report": "Anteprima Statistiche di Utilizzo",
     "Quick guide to supported patterns": "Guida veloce agli schemi supportati",
@@ -271,6 +273,7 @@
     "When adding a new device, keep in mind that this device must be added on the other side too.": "Quando si aggiunge un nuovo dispositivo, tenere presente che il dispositivo deve essere aggiunto anche dall'altra parte.",
     "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Quando aggiungi una nuova cartella, ricordati che gli ID vengono utilizzati per collegare le cartelle nei dispositivi. Distinguono maiuscole e minuscole e devono corrispondere esattamente su tutti i dispositivi.",
     "Yes": "Sì",
+    "You can also select one of these nearby devices:": "È anche possibile selezionare uno di questi dispositivi nelle vicinanze:",
     "You can change your choice at any time in the Settings dialog.": "Puoi sempre cambiare la tua scelta nel dialogo Impostazioni.",
     "You can read more about the two release channels at the link below.": "Puoi ottenere piu informazioni riguarda i due canali di rilascio nel collegamento sottostante.",
     "You must keep at least one version.": "È necessario mantenere almeno una versione.",

gui/default/assets/lang/lang-ja.json

@@ -1,7 +1,7 @@
 {
     "A device with that ID is already added.": "指定されたIDのデバイスは登録済みです。",
-    "A negative number of days doesn't make sense.": "負の日数は指定できません。",
-    "A new major version may not be compatible with previous versions.": "新しいメジャーバージョンは以前のバージョンと互換性がないかもしれません。",
+    "A negative number of days doesn't make sense.": "日数は0以上で指定してください。",
+    "A new major version may not be compatible with previous versions.": "新しいメジャーバージョンは以前のバージョンと互換性がない場合があります。",
     "API Key": "APIキー",
     "About": "Syncthingについて",
     "Action": "動作",
@@ -10,24 +10,24 @@
     "Add Device": "デバイスを追加",
     "Add Folder": "フォルダーを追加",
     "Add Remote Device": "接続先デバイスを追加",
-    "Add devices from the introducer to our device list, for mutually shared folders.": "紹介者デバイスから紹介されたデバイスは、相互に共有しているフォルダーがある場合、このデバイス上でも登録されます。",
-    "Add new folder?": "新しいフォルダーとして追加しますか?",
+    "Add devices from the introducer to our device list, for mutually shared folders.": "紹介者デバイスから紹介されたデバイスは、相互に共有しているフォルダーがある場合、このデバイス上にも追加されます。",
+    "Add new folder?": "新しいフォルダーとして追加しますか？",
     "Address": "アドレス",
     "Addresses": "アドレス",
     "Advanced": "高度な設定",
     "Advanced Configuration": "高度な設定",
     "Advanced settings": "高度な設定",
     "All Data": "全てのデータ",
-    "Allow Anonymous Usage Reporting?": "匿名で利用状況をレポートすることを許可しますか?",
+    "Allow Anonymous Usage Reporting?": "匿名で使用状況をレポートすることを許可しますか？",
     "Allowed Networks": "許可されているネットワーク",
     "Alphabetic": "アルファベット順",
     "An external command handles the versioning. It has to remove the file from the shared folder.": "外部コマンドにバージョン管理を任せます。ここで指定するコマンドは、共有フォルダーからファイルを削除するものでなくてはなりません。",
     "An external command handles the versioning. It has to remove the file from the synced folder.": "外部コマンドにバージョンを管理させます。ここで指定するコマンドは、同期フォルダーからファイルを削除するものでなくてはなりません。",
-    "Anonymous Usage Reporting": "匿名での利用状況レポート",
-    "Any devices configured on an introducer device will be added to this device as well.": "紹介者デバイス上で設定されたデバイスは、このデバイス上でも追加されます。",
-    "Automatic upgrade now offers the choice between stable releases and release candidates.": "自動アップグレードは、安定リリース版とリリース候補版のいずれかを選べるようになりました。",
+    "Anonymous Usage Reporting": "匿名での使用状況レポート",
+    "Any devices configured on an introducer device will be added to this device as well.": "紹介者デバイス上で設定されたデバイスは、このデバイス上にも追加されます。",
+    "Automatic upgrade now offers the choice between stable releases and release candidates.": "自動アップグレードは、安定版とリリース候補版のいずれかを選べるようになりました。",
     "Automatic upgrades": "自動アップグレード",
-    "Be careful!": "注意してください。",
+    "Be careful!": "注意！",
     "Bugs": "バグ",
     "CPU Utilization": "CPU使用率",
     "Changelog": "更新履歴",
@@ -35,7 +35,7 @@
     "Click to see discovery failures": "接続に失敗した探索サーバーを確認するにはクリックしてください",
     "Close": "閉じる",
     "Command": "コマンド",
-    "Comment, when used at the start of a line": "行頭で使用された場合、コメント行",
+    "Comment, when used at the start of a line": "行頭で使用するとコメント行になります",
     "Compression": "圧縮",
     "Configured": "設定値",
     "Connection Error": "接続エラー",
@@ -45,12 +45,12 @@
     "Copyright © 2014-2016 the following Contributors:": "Copyright © 2014-2016 the following Contributors:",
     "Copyright © 2014-2017 the following Contributors:": "Copyright © 2014-2017 the following Contributors:",
     "Creating ignore patterns, overwriting an existing file at {%path%}.": "無視パターンを作成中。既存のファイルが {{path}} にある場合は上書きされます。",
-    "Danger!": "危険",
+    "Danger!": "危険！",
     "Deleted": "削除",
     "Device": "デバイス",
-    "Device \"{%name%}\" ({%device%} at {%address%}) wants to connect. Add new device?": "デバイス「{{name}}」 ({{address}} の {{device}}) が接続を求めています。新しいデバイスとして追加しますか?",
+    "Device \"{%name%}\" ({%device%} at {%address%}) wants to connect. Add new device?": "デバイス「{{name}}」 ({{address}} の {{device}}) が接続を求めています。新しいデバイスとして追加しますか？",
     "Device ID": "デバイスID",
-    "Device Identification": "デバイス識別情報",
+    "Device Identification": "デバイスID",
     "Device Name": "デバイス名",
     "Devices": "デバイス",
     "Disconnected": "切断中",
@@ -65,24 +65,24 @@
     "Edit Device": "デバイスの編集",
     "Edit Folder": "フォルダーの編集",
     "Editing": "編集中",
-    "Editing {%path%}.": "{{path}} を編集中。",
+    "Editing {%path%}.": "{{path}} を編集中",
     "Enable NAT traversal": "NATトラバーサルを有効にする",
     "Enable Relaying": "中継サーバー経由の通信を有効にする",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "0以上の数 (例: 2.35) を入力し、単位を選択してください。パーセントはディスク容量全体に対する割合です。",
     "Enter a non-privileged port number (1024 - 65535).": "非特権ポート番号 (1024 - 65535) を入力してください。",
-    "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "アドレスを指定する場合は「tcp://IPアドレス:ポート」または「tcp://ホスト名:ポート」をコンマで区切って入力してください。自動探索を行う場合は「dynamic」と入力してください。",
+    "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "アドレスを指定する場合は「tcp://IPアドレス:ポート, tcp://ホスト名:ポート」のようにコンマで区切って入力してください。自動探索を行う場合は「dynamic」と入力してください。",
     "Enter ignore patterns, one per line.": "無視するファイル名のパターンを、一行につき一条件で入力してください。",
     "Error": "エラー",
     "External File Versioning": "外部バージョン管理",
     "Failed Items": "失敗した項目",
-    "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "お使いのネットワークにIPv6の接続性がない場合、IPv6のサーバーへの接続に失敗しても異常ではありません。",
+    "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "お使いのネットワークがIPv6を利用していない場合、IPv6のサーバーへの接続に失敗しても異常ではありません。",
     "File Pull Order": "ファイルを取得する順序",
     "File Versioning": "ファイルのバージョン管理",
-    "File permission bits are ignored when looking for changes. Use on FAT file systems.": "ファイルの変更を探すときにパーミッションを無視します。FATファイルシステムでご利用ください。",
-    "Files are moved to .stversions directory when replaced or deleted by Syncthing.": "Syncthingによって置き換えられたり削除されたりしたファイルは、.stversions ディレクトリに移動します。",
-    "Files are moved to .stversions folder when replaced or deleted by Syncthing.": "Syncthingがファイルを置き換えたり削除したりするとき、古い内容を .stversions フォルダーに移動します。",
-    "Files are moved to date stamped versions in a .stversions directory when replaced or deleted by Syncthing.": "Syncthingによって置き換えられたり削除されたりしたファイルは、タイムスタンプ付きのファイル名で .stversions ディレクトリに移動します。",
-    "Files are moved to date stamped versions in a .stversions folder when replaced or deleted by Syncthing.": "Syncthingがファイルを置き換えたり削除したりするとき、古い内容はファイル名にタイムスタンプを付けて .stversions フォルダーに移動します。",
+    "File permission bits are ignored when looking for changes. Use on FAT file systems.": "パーミッションの変更を検知しません。FATファイルシステムでご利用ください。",
+    "Files are moved to .stversions directory when replaced or deleted by Syncthing.": "Syncthingによって置き換えられたり削除されたファイルは、.stversions ディレクトリに移動します。",
+    "Files are moved to .stversions folder when replaced or deleted by Syncthing.": "Syncthingによって置き換えられたり削除されたファイルは、.stversions フォルダーに移動します。",
+    "Files are moved to date stamped versions in a .stversions directory when replaced or deleted by Syncthing.": "Syncthingによって置き換えられたり削除されたファイルは、タイムスタンプ付きのファイル名で .stversions ディレクトリに移動します。",
+    "Files are moved to date stamped versions in a .stversions folder when replaced or deleted by Syncthing.": "Syncthingによって置き換えられたり削除されたファイルは、タイムスタンプ付きのファイル名で .stversions フォルダーに移動します。",
     "Files are protected from changes made on other devices, but changes made on this device will be sent to the rest of the cluster.": "ファイルを他のデバイスによる変更から保護します。一方、このデバイスでの変更は他のデバイスに送信されます。",
     "Folder": "フォルダー",
     "Folder ID": "フォルダーID",
@@ -94,12 +94,12 @@
     "GUI Authentication Password": "GUI認証パスワード",
     "GUI Authentication User": "GUI認証ユーザー名",
     "GUI Listen Address": "GUI待ち受けアドレス",
-    "GUI Listen Addresses": "GUI待ち受けアドレスリスト",
+    "GUI Listen Addresses": "GUI待ち受けアドレス",
     "GUI Theme": "GUIテーマ",
     "Generate": "生成",
     "Global Changes": "全変更点",
-    "Global Discovery": "大域探索",
-    "Global Discovery Servers": "大域探索サーバー",
+    "Global Discovery": "グローバル探索",
+    "Global Discovery Servers": "グローバル探索サーバー",
     "Global State": "グローバル状態",
     "Help": "ヘルプ",
     "Home page": "ホームページ",
@@ -107,14 +107,14 @@
     "Ignore Patterns": "無視するファイル名",
     "Ignore Permissions": "パーミッションを無視する",
     "Incoming Rate Limit (KiB/s)": "下り帯域制限 (KiB/s)",
-    "Incorrect configuration may damage your folder contents and render Syncthing inoperable.": "間違った設定を行うと、フォルダーの内容を壊したり、Syncthingを操作不能にしたりする可能性があります。",
+    "Incorrect configuration may damage your folder contents and render Syncthing inoperable.": "間違った設定を行うと、フォルダーの内容を壊したり、Syncthingが動作しなくなる可能性があります。",
     "Introduced By": "紹介元",
     "Introducer": "紹介者デバイス",
     "Inversion of the given condition (i.e. do not exclude)": "条件の否定 (つまり、無視しないという意味になります)",
-    "Keep Versions": "保存するバージョンの数",
+    "Keep Versions": "保持するバージョン数",
     "Largest First": "大きい順",
     "Last File Received": "最後に受信したファイル",
-    "Last Scan": "最終スキャン時刻",
+    "Last Scan": "最終スキャン日時",
     "Last seen": "最終接続日時",
     "Later": "後で設定",
     "Latest Change": "最終変更内容",
@@ -125,7 +125,7 @@
     "Local State (Total)": "ローカル状態 (合計)",
     "Major Upgrade": "メジャーアップグレード",
     "Master": "マスター",
-    "Maximum Age": "最大寿命",
+    "Maximum Age": "最大保存日数",
     "Metadata Only": "メタデータのみ",
     "Minimum Free Disk Space": "同期を停止する最小空きディスク容量",
     "Move to top of queue": "最優先にする",
@@ -149,18 +149,20 @@
     "Outgoing Rate Limit (KiB/s)": "上り帯域制限 (KiB/s)",
     "Override Changes": "他のデバイスの変更を上書きする",
     "Path": "パス",
-    "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "ローカルコンピュータ上のフォルダーパス。存在しない場合は作成されます。チルダ (~) で次のフォルダーを短縮入力できます:",
-    "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).": "古いバージョンを保存するパス (空欄の場合、デフォルトで共有フォルダー内の .stversions ディレクトリになります)。",
-    "Path where versions should be stored (leave empty for the default .stversions folder in the folder).": "古いバージョンを保存するパス (空欄の場合、デフォルトで .stversions になります)。",
+    "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "ローカルコンピュータ上のフォルダーパス。フォルダーが存在しない場合は作成されます。チルダ (~) で次のフォルダーを短縮入力できます:",
+    "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).": "古いバージョンを保存するパス (空欄の場合、デフォルトで共有フォルダー内の .stversions ディレクトリ)",
+    "Path where versions should be stored (leave empty for the default .stversions folder in the folder).": "古いバージョンを保存するパス (空欄の場合、デフォルトでフォルダー内の .stversions フォルダー)",
     "Pause": "一時停止",
     "Pause All": "すべて一時停止",
     "Paused": "一時停止中",
     "Please consult the release notes before performing a major upgrade.": "メジャーアップグレードを行う前にリリースノートを参照してください。",
     "Please set a GUI Authentication User and Password in the Settings dialog.": "設定ダイアログから、GUI認証ユーザー名とパスワードを設定してください。",
     "Please wait": "お待ちください",
+    "Prefix indicating that the file can be deleted if preventing directory removal": "このファイルが中に残っているためにディレクトリを削除できない場合、このファイルごと消してもよいことを示す接頭辞",
+    "Prefix indicating that the pattern should be matched without case sensitivity": "大文字・小文字を同一視してマッチさせる接頭辞",
     "Preview": "プレビュー",
-    "Preview Usage Report": "利用状況レポートのプレビュー",
-    "Quick guide to supported patterns": "サポートされているパターンの簡易ガイド",
+    "Preview Usage Report": "使用状況レポートのプレビュー",
+    "Quick guide to supported patterns": "サポートされているパターンのクイックガイド",
     "RAM Utilization": "メモリ使用量",
     "Random": "ランダム",
     "Reduced by ignore patterns": "無視パターン該当分を除く",
@@ -189,28 +191,28 @@
     "Share": "共有",
     "Share Folder": "フォルダーを共有する",
     "Share Folders With Device": "このデバイスと共有するフォルダー",
-    "Share With Devices": "共有対象のデバイス",
-    "Share this folder?": "このフォルダーを共有しますか?",
-    "Shared With": "共有相手",
+    "Share With Devices": "共有するデバイス",
+    "Share this folder?": "このフォルダーを共有しますか？",
+    "Shared With": "共有中のデバイス",
     "Show ID": "IDを表示",
     "Show QR": "QRコードを表示",
     "Shown instead of Device ID in the cluster status. Will be advertised to other devices as an optional default name.": "ステータス画面でデバイスIDの代わりに表示されます。他のデバイスに対してもデフォルトの名前として通知されます。",
-    "Shown instead of Device ID in the cluster status. Will be updated to the name the device advertises if left empty.": "ステータス画面でデバイスIDの代わりに表示されます。空欄の場合、相手デバイスが通知してきた名前に更新されます。",
+    "Shown instead of Device ID in the cluster status. Will be updated to the name the device advertises if left empty.": "ステータス画面でデバイスIDの代わりに表示されます。空欄にすると相手側デバイスが通知してきた名前で更新されます。",
     "Shutdown": "シャットダウン",
     "Shutdown Complete": "シャットダウン完了",
     "Simple File Versioning": "単純バージョン管理",
     "Single level wildcard (matches within a directory only)": "ワイルドカード (単一のディレクトリ内だけでマッチします)",
     "Smallest First": "小さい順",
     "Source Code": "ソースコード",
-    "Stable releases and release candidates": "安定リリース版とリリース候補版",
-    "Stable releases are delayed by about two weeks. During this time they go through testing as release candidates.": "安定リリース版はおよそ2週間後にリリースされます。その間にリリース候補版としてテストされます。",
-    "Stable releases only": "安定リリース版のみ",
+    "Stable releases and release candidates": "安定版とリリース候補版",
+    "Stable releases are delayed by about two weeks. During this time they go through testing as release candidates.": "安定版は、リリース候補版としてのテスト後およそ2週間でリリースされます。",
+    "Stable releases only": "安定版のみ",
     "Staggered File Versioning": "期間別バージョン管理",
     "Start Browser": "起動時にウェブブラウザーで状態を表示する",
     "Statistics": "統計情報",
     "Stopped": "停止中",
     "Support": "サポート",
-    "Sync Protocol Listen Addresses": "Syncプロトコルの待ち受けアドレスリスト",
+    "Sync Protocol Listen Addresses": "同期プロトコルの待ち受けアドレス",
     "Syncing": "同期中",
     "Syncthing has been shut down.": "Syncthingをシャットダウンしました。",
     "Syncthing includes the following software or portions thereof:": "Syncthingは以下のソフトウェアまたはその一部を内包しています:",
@@ -221,26 +223,26 @@
     "The Syncthing admin interface is configured to allow remote access without a password.": "Syncthingの管理画面が、パスワードなしで外部からアクセスできるように設定されています。",
     "The aggregated statistics are publicly available at the URL below.": "集計結果は次のURLで公開されています。",
     "The configuration has been saved but not activated. Syncthing must restart to activate the new configuration.": "設定が保存されましたが、まだ有効になっていません。新しい設定を有効にするにはSyncthingを再起動してください。",
-    "The device ID cannot be blank.": "デバイスIDは空欄にできません。",
-    "The device ID to enter here can be found in the \"Actions > Show ID\" dialog on the other device. Spaces and dashes are optional (ignored).": "ここに入力するデバイスIDは、接続したい相手側デバイスの [メニュー]→[IDを表示] で確認することができます。スペースとハイフンは入力しなくてもかまいません。",
-    "The encrypted usage report is sent daily. It is used to track common platforms, folder sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.": "利用状況レポートは暗号化されて毎日送信されます。この情報はプラットフォーム、フォルダーの大きさ、アプリのバージョンを調査するために使われます。送信するデータセットが変更された場合、このダイアログで再度確認が求められます。",
+    "The device ID cannot be blank.": "デバイスIDを入力してください。",
+    "The device ID to enter here can be found in the \"Actions > Show ID\" dialog on the other device. Spaces and dashes are optional (ignored).": "ここに入力するデバイスIDは、接続したい相手側デバイスの [メニュー]→[IDを表示] で確認できます。スペースとハイフンは入力しなくてもかまいません。",
+    "The encrypted usage report is sent daily. It is used to track common platforms, folder sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.": "使用状況レポートは暗号化されて毎日送信されます。この情報はプラットフォーム、フォルダーのサイズ、アプリケーションのバージョンを調査するために使われます。送信するデータセットが変更された場合、このダイアログで再度確認が求められます。",
     "The entered device ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.": "入力されたデバイスIDが正しくありません。デバイスIDは52文字または56文字で、アルファベットと数字からなります。スペースとハイフンは入力してもしなくてもかまいません。",
     "The first command line parameter is the folder path and the second parameter is the relative path in the folder.": "第1コマンドライン引数はフォルダーのパス、第2引数はフォルダー内の相対パスです。",
     "The folder ID cannot be blank.": "フォルダーIDは空欄にできません。",
     "The folder ID must be unique.": "フォルダーIDが重複しています。",
     "The folder path cannot be blank.": "フォルダーパスは空欄にできません。",
-    "The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.": "保存間隔は次の通りです。最近1時間は30秒ごとに古いバージョンを保存します。同様に、最近1日間は1時間ごとに、最近30日間は1日ごとに、その後最大寿命までは1週間ごとに、古いバージョンを保存します。",
+    "The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.": "保存間隔は次の通りです。初めの1時間は30秒ごとに古いバージョンを保存します。同様に、初めの1日間は1時間ごと、初めの30日間は1日ごと、その後最大保存日数までは1週間ごとに、古いバージョンを保存します。",
     "The following items could not be synchronized.": "以下の項目は同期できませんでした。",
-    "The maximum age must be a number and cannot be blank.": "最大寿命は数値を指定してください。空欄にはできません。",
-    "The maximum time to keep a version (in days, set to 0 to keep versions forever).": "古いバージョンを保存する最大日数 (0を指定すると無期限になります)。",
+    "The maximum age must be a number and cannot be blank.": "最大保存日数には数値を指定してください。空欄にはできません。",
+    "The maximum time to keep a version (in days, set to 0 to keep versions forever).": "古いバージョンを保持する最大日数 (0で無期限)",
     "The minimum free disk space percentage must be a non-negative number between 0 and 100 (inclusive).": "最小空きディスク容量はパーセントで、0から100の値を入力してください。",
     "The number of days must be a number and cannot be blank.": "日数は数値を指定してください。空欄にはできません。",
-    "The number of days to keep files in the trash can. Zero means forever.": "ゴミ箱にファイルを保存する日数。0を指定すると無期限になります。",
-    "The number of old versions to keep, per file.": "ファイルごとに古いバージョンをいくつ保存するかを指定します。",
-    "The number of versions must be a number and cannot be blank.": "保存するバージョンの数は数値を指定してください。空欄にはできません。",
-    "The path cannot be blank.": "パスは空欄にできません。",
-    "The rate limit must be a non-negative number (0: no limit)": "帯域制限の値として負の数は指定できません (0を指定すると無制限になります)。",
-    "The rescan interval must be a non-negative number of seconds.": "再スキャン間隔として負の数は指定できません。",
+    "The number of days to keep files in the trash can. Zero means forever.": "ゴミ箱でファイルを保持する日数 (0で無期限)",
+    "The number of old versions to keep, per file.": "ファイルごとに古いバージョンをいくつ保持するかを指定します。",
+    "The number of versions must be a number and cannot be blank.": "保持するバージョン数は数値を指定してください。空欄にはできません。",
+    "The path cannot be blank.": "パスを入力してください。",
+    "The rate limit must be a non-negative number (0: no limit)": "帯域制限値は0以上で指定して下さい。 (0で無制限)",
+    "The rescan interval must be a non-negative number of seconds.": "再スキャン間隔は0秒以上で指定してください。",
     "They are retried automatically and will be synced when the error is resolved.": "エラーが解決すると、自動的に再試行され同期されます。",
     "This Device": "このデバイス",
     "This can easily give hackers access to read and change any files on your computer.": "この設定のままでは、あなたのコンピューターにある任意のファイルを、他者が簡単に盗み見たり書き換えたりすることができます。",
@@ -259,21 +261,22 @@
     "Upgrading": "アップグレード中",
     "Upload Rate": "アップロード速度",
     "Uptime": "稼働時間",
-    "Usage reporting is always enabled for candidate releases.": "リリース候補版では常に利用状況レポートが送信されます。",
+    "Usage reporting is always enabled for candidate releases.": "リリース候補版では常に使用状況レポートが送信されます。",
     "Use HTTPS for GUI": "GUIにHTTPSを使用する",
     "Version": "バージョン",
     "Versions Path": "古いバージョンを保存するパス",
-    "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "古いバージョンは、最大寿命もしくは期間ごとの最大保存数を超えた場合、自動的に削除されます。",
+    "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "古いバージョンは、最大保存日数もしくは期間ごとの最大保存数を超えた場合、自動的に削除されます。",
     "Warning, this path is a parent directory of an existing folder \"{%otherFolder%}\".": "警告: 入力されたパスは、設定済みのフォルダー「{{otherFolder}}」の親ディレクトリです。",
     "Warning, this path is a parent directory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "警告: 入力されたパスは、設定済みのフォルダー「{{otherFolderLabel}}」 ({{otherFolder}}) の親ディレクトリです。",
     "Warning, this path is a subdirectory of an existing folder \"{%otherFolder%}\".": "警告: 入力されたパスは、設定済みのフォルダー「{{otherFolder}}」のサブディレクトリです。",
     "Warning, this path is a subdirectory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "警告: 入力されたパスは、設定済みのフォルダー「{{otherFolderLabel}}」 ({{otherFolder}}) のサブディレクトリです。",
-    "When adding a new device, keep in mind that this device must be added on the other side too.": "新しいデバイスを追加する際は、相手側のデバイスにもこのデバイスを追加する必要があることに留意してください。",
+    "When adding a new device, keep in mind that this device must be added on the other side too.": "新しいデバイスを追加する際は、相手側デバイスにもこのデバイスを追加してください。",
     "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "新しいフォルダーを追加する際、フォルダーIDはデバイス間でフォルダーの対応づけに使われることに注意してください。フォルダーIDは大文字と小文字が区別され、共有するすべてのデバイスの間で完全に一致しなくてはなりません。",
     "Yes": "はい",
-    "You can change your choice at any time in the Settings dialog.": "どちらを選ぶかは設定ダイアログからいつでも変更できます。",
+    "You can also select one of these nearby devices:": "近くに検出された以下のデバイスの一つを選択できます。",
+    "You can change your choice at any time in the Settings dialog.": "この設定はいつでも変更できます。",
     "You can read more about the two release channels at the link below.": "2種類のリリースチャネルについての詳細は、以下のリンク先を参照してください。",
-    "You must keep at least one version.": "少なくとも一つのバージョンを保存してください。",
+    "You must keep at least one version.": "少なくとも一つのバージョンを保持する必要があります。",
     "days": "日",
     "directories": "個のディレクトリ",
     "files": "個のファイル",

gui/default/assets/lang/lang-ko-KR.json

@@ -158,12 +158,14 @@
     "Please consult the release notes before performing a major upgrade.": "메이저 업데이트를 하기 전에 먼저 릴리즈 노트를 살펴보세요.",
     "Please set a GUI Authentication User and Password in the Settings dialog.": "설정에서 GUI 인증용 User와 암호를 입력해주세요.",
     "Please wait": "기다려 주십시오",
+    "Prefix indicating that the file can be deleted if preventing directory removal": "디렉토리 제거를 방지 할 경우 파일을 삭제할 수 있음을 나타내는 접두사",
+    "Prefix indicating that the pattern should be matched without case sensitivity": "대소 문자를 구분하지 않고 패턴을 일치시켜야 함을 나타내는 접두사",
     "Preview": "미리보기",
     "Preview Usage Report": "사용 보고서 미리보기",
     "Quick guide to supported patterns": "지원하는 패턴에 대한 빠른 도움말",
     "RAM Utilization": "RAM 사용량",
     "Random": "무작위",
-    "Reduced by ignore patterns": "Reduced by ignore patterns",
+    "Reduced by ignore patterns": "무시 패턴으로 축소",
     "Release Notes": "릴리즈 노트",
     "Release candidates contain the latest features and fixes. They are similar to the traditional bi-weekly Syncthing releases.": "출시 후보는 최신 기능과 버그 픽스를 포함 하고 있습니다. 이 버전은 예전 방식인 2주 주기 Syncthing 출시와 비슷합니다.",
     "Remote Devices": "원격 기기",
@@ -271,6 +273,7 @@
     "When adding a new device, keep in mind that this device must be added on the other side too.": "새 장치를 추가할 시 추가한 기기 쪽에서도 이 장치를 추가해야 합니다.",
     "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "새 폴더를 추가할 시 폴더 ID는 장치간에 폴더를 묶을 때 사용됩니다. 대소문자를 구분하며 모든 장치에서 같은 ID를 사용해야 합니다.",
     "Yes": "예",
+    "You can also select one of these nearby devices:": "주변 기기 중 하나를 선택할 수 있습니다:",
     "You can change your choice at any time in the Settings dialog.": "설정창 에서 언제든지 원하시는 때에 설정을 변경하는 것이 가능합니다.",
     "You can read more about the two release channels at the link below.": "이 두 개의 출시 채널에 대해 아래 링크에서 자세하게 읽어 보실 수 있습니다.",
     "You must keep at least one version.": "최소 한 개의 버전은 유지해야 합니다.",

gui/default/assets/lang/lang-lt.json

@@ -158,6 +158,8 @@
     "Please consult the release notes before performing a major upgrade.": "Peržvelkite laidos informaciją prieš atlikdami stambų atnaujinimą.",
     "Please set a GUI Authentication User and Password in the Settings dialog.": "Prašome nustatymų dialoge nustatyti valdymo skydelio vartotojo vardą ir slaptažodį.",
     "Please wait": "Prašome palaukti",
+    "Prefix indicating that the file can be deleted if preventing directory removal": "Priešdelis, nurodantis, kad failas gali būti ištrintas tuo atveju, jei neleidžia šalinti katalogo",
+    "Prefix indicating that the pattern should be matched without case sensitivity": "Priešdelis, nurodantis, kad šablonas turėtų būti atitiktas neskiriant raidžių dydžio",
     "Preview": "Peržiūra",
     "Preview Usage Report": "Naudojimo ataskaitos peržiūra",
     "Quick guide to supported patterns": "Trumpas leistinų šablonų vadovas",
@@ -271,6 +273,7 @@
     "When adding a new device, keep in mind that this device must be added on the other side too.": "Pridėdami įrenginį, turėkite omeny, kad šis įrenginys taip pat turi būti pridėtas kitoje pusėje.",
     "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Kai įvedate naują aplanką neužmirškite, kad jis bus naudojamas visuose įrenginiuose. Svarbu visur įvesti visiškai tokį pat aplanko vardą neužmirštant apie didžiąsias ir mažąsias raides.",
     "Yes": "Taip",
+    "You can also select one of these nearby devices:": "Jūs taip pat galite pasirinkti vieną iš šių šalia esančių įrenginių:",
     "You can change your choice at any time in the Settings dialog.": "Jūs bet kuriuo metu galite pakeisti savo pasirinkimą nustatymų dialoge.",
     "You can read more about the two release channels at the link below.": "Jūs galite perskaityti daugiau apie šiuos du laidos kanalus, pasinaudodami žemiau esančia nuoroda.",
     "You must keep at least one version.": "Būtina saugoti bent vieną versiją.",

gui/default/assets/lang/lang-nb.json

@@ -158,6 +158,8 @@
     "Please consult the release notes before performing a major upgrade.": "Sjekk utgivelsesnotatene før en storoppgradering utføres.",
     "Please set a GUI Authentication User and Password in the Settings dialog.": "Vennligst angi bruker og passord for GUI-autentisering i innstillingsvinduet.",
     "Please wait": "Vent",
+    "Prefix indicating that the file can be deleted if preventing directory removal": "Prefix indicating that the file can be deleted if preventing directory removal",
+    "Prefix indicating that the pattern should be matched without case sensitivity": "Prefix indicating that the pattern should be matched without case sensitivity",
     "Preview": "Forhåndsvisning",
     "Preview Usage Report": "Forhåndsvisning av datainnsamling",
     "Quick guide to supported patterns": "Kjapp innføring i godkjente mønster",
@@ -268,9 +270,10 @@
     "Warning, this path is a parent directory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Advarsel, denne stien er en foreldremappe for en eksisterende mappe \"{{otherFolderLabel}}\" ({{otherFolder}}).",
     "Warning, this path is a subdirectory of an existing folder \"{%otherFolder%}\".": "Advarsel, denne stien er en undermappe i en eksisterende mappe \"{{otherFolder}}\".",
     "Warning, this path is a subdirectory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Advarsel, denne stien er en undermappe for en eksisterende mappe \"{{otherFolderLabel}}\" ({{otherFolder}}).",
-    "When adding a new device, keep in mind that this device must be added on the other side too.": "Merk at når en ny enhet blir lagt til må denne også legges til på andre siden.",
+    "When adding a new device, keep in mind that this device must be added on the other side too.": "When adding a new device, keep in mind that this device must be added on the other side too.",
     "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Når en ny mappe blir lagt til, husk at Mappe-ID blir brukt til å binde sammen mapper mellom enheter. Det er forskjell på store og små bokstaver, så IDene må være identiske på alle enhetene.",
     "Yes": "Ja",
+    "You can also select one of these nearby devices:": "You can also select one of these nearby devices:",
     "You can change your choice at any time in the Settings dialog.": "Du kan endre ditt valg når som helst i innstillingene.",
     "You can read more about the two release channels at the link below.": "Du kan lese mer om de to nye utgivelseskanalene i lenken nedenfor.",
     "You must keep at least one version.": "Du må beholde minst én versjon",

gui/default/assets/lang/lang-nl.json

@@ -9,7 +9,7 @@
     "Add": "Toevoegen",
     "Add Device": "Apparaat toevoegen",
     "Add Folder": "Map toevoegen",
-    "Add Remote Device": "Voeg extern apparaat toe",
+    "Add Remote Device": "Extern apparaat toevoegen",
     "Add devices from the introducer to our device list, for mutually shared folders.": "Voeg apparaten van het introductieapparaat toe aan de lijst met apparaten voor gemeenschappelijk gedeelde mappen.",
     "Add new folder?": "Nieuwe map toevoegen?",
     "Address": "Adres",
@@ -63,11 +63,11 @@
     "Downloading": "Bezig met downloaden",
     "Edit": "Bewerk",
     "Edit Device": "Bewerk apparaat",
-    "Edit Folder": "Bewerk map",
+    "Edit Folder": "Map bewerken",
     "Editing": "Bezig met bewerken",
     "Editing {%path%}.": "Bezig met bewerken van {{path}}.",
-    "Enable NAT traversal": "Activeer NAT traversal",
-    "Enable Relaying": "Activeer doorsturen",
+    "Enable NAT traversal": "NAT traversal inschakelen",
+    "Enable Relaying": "Doorsturen inschakelen",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.",
     "Enter a non-privileged port number (1024 - 65535).": "Enter a non-privileged port number (1024 - 65535).",
     "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Voer door komma's gescheiden (\"tcp://ip:port\", \"tcp://host:port\") adressen in of voer \"dynamisch\" in om automatische ontdekking van het adres uit te voeren.",
@@ -93,7 +93,7 @@
     "GUI": "GUI",
     "GUI Authentication Password": "GUI-wachtwoord",
     "GUI Authentication User": "GUI-gebruikersnaam",
-    "GUI Listen Address": "GUI Listen Address",
+    "GUI Listen Address": "GUI-luisteradres",
     "GUI Listen Addresses": "GUI-adres",
     "GUI Theme": "GUI-thema",
     "Generate": "Genereer",
@@ -158,6 +158,8 @@
     "Please consult the release notes before performing a major upgrade.": "Lees eerst de release notes voordat u een grote update uitvoert.",
     "Please set a GUI Authentication User and Password in the Settings dialog.": "Stel een gebruikersnaam en wachtwoord in bij 'Instellingen'.",
     "Please wait": "Even geduld",
+    "Prefix indicating that the file can be deleted if preventing directory removal": "Prefix indicating that the file can be deleted if preventing directory removal",
+    "Prefix indicating that the pattern should be matched without case sensitivity": "Prefix indicating that the pattern should be matched without case sensitivity",
     "Preview": "Preview",
     "Preview Usage Report": "Preview gebruiksstatistieken",
     "Quick guide to supported patterns": "Snelgids voor ondersteunde patronen",
@@ -271,6 +273,7 @@
     "When adding a new device, keep in mind that this device must be added on the other side too.": "Wanneer een nieuw toestel wordt toegevoegd, houd er dan rekening mee dat dit toestel ook aan de andere kant moet worden toegevoegd.",
     "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Houd er bij het toevoegen van nieuwe mappen rekening mee dat het map-ID gebruikt wordt om mappen tussen apparaten te verbinden. Dit ID is hoofdlettergevoelig en moet identiek zijn op andere apparaten.",
     "Yes": "Ja",
+    "You can also select one of these nearby devices:": "You can also select one of these nearby devices:",
     "You can change your choice at any time in the Settings dialog.": "Je kan je keuze op elk moment aanpassen in de Instellingen.",
     "You can read more about the two release channels at the link below.": "Je kan meer te weten komen over de twee uitgavekanalen via de link hieronder.",
     "You must keep at least one version.": "Minstens 1 versie moet bewaard blijven.",

gui/default/assets/lang/lang-nn.json

@@ -158,6 +158,8 @@
     "Please consult the release notes before performing a major upgrade.": "Sjå utgjevingsmerknadene før ei hovudoppgradering vert utført.",
     "Please set a GUI Authentication User and Password in the Settings dialog.": "Ver vennleg å laga ein GUI-brukar og eit passord i Innstillingar-dialogen.",
     "Please wait": "Gjer vel og vent",
+    "Prefix indicating that the file can be deleted if preventing directory removal": "Prefix indicating that the file can be deleted if preventing directory removal",
+    "Prefix indicating that the pattern should be matched without case sensitivity": "Prefix indicating that the pattern should be matched without case sensitivity",
     "Preview": "Førehandsvisning",
     "Preview Usage Report": "Førehandsvis bruksrapporten",
     "Quick guide to supported patterns": "Kjapp innføring i godkjente mønster",
@@ -271,6 +273,7 @@
     "When adding a new device, keep in mind that this device must be added on the other side too.": "Hugs at når ei ny eining vert lagt til, må ho òg leggjast til på andre sida.",
     "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Hugs at når ei ny mappe vert lagt til, vert mappe-ID-en brukt til å binda saman mappene mellom einingane. Det er skilnad på store og små bokstavar, så ID-ane må vera identiske på alle einingane.",
     "Yes": "Ja",
+    "You can also select one of these nearby devices:": "You can also select one of these nearby devices:",
     "You can change your choice at any time in the Settings dialog.": "You can change your choice at any time in the Settings dialog.",
     "You can read more about the two release channels at the link below.": "You can read more about the two release channels at the link below.",
     "You must keep at least one version.": "Du må behalda minst ein versjon.",

gui/default/assets/lang/lang-pl.json

@@ -10,7 +10,7 @@
     "Add Device": "Dodaj urządzenie",
     "Add Folder": "Dodaj folder",
     "Add Remote Device": "Dodaj urządzenie zdalne",
-    "Add devices from the introducer to our device list, for mutually shared folders.": "Add devices from the introducer to our device list, for mutually shared folders.",
+    "Add devices from the introducer to our device list, for mutually shared folders.": "Dodaj urządzenia od wprowadzającego do tej maszyny alby obustronnie dzielić katalogi.",
     "Add new folder?": "Dodać nowy folder?",
     "Address": "Adres",
     "Addresses": "Adresy",
@@ -19,20 +19,20 @@
     "Advanced settings": "Ustawienia zaawansowane",
     "All Data": "Wszystkie dane",
     "Allow Anonymous Usage Reporting?": "Zezwalaj na anonimowe statystyki użycia?",
-    "Allowed Networks": "Allowed Networks",
+    "Allowed Networks": "Dozwolone sieci",
     "Alphabetic": "Alfabetycznie",
-    "An external command handles the versioning. It has to remove the file from the shared folder.": "An external command handles the versioning. It has to remove the file from the shared folder.",
-    "An external command handles the versioning. It has to remove the file from the synced folder.": "Zewnętrzna komenda obsługuje kontrolę wersji. Musi ona usunąć ten plik z synchronizowanego folderu.",
+    "An external command handles the versioning. It has to remove the file from the shared folder.": "Zewnętrzna komenda odpowiedzialna za wersjonowanie. Musi usunąć plik ze współdzielonego folderu.",
+    "An external command handles the versioning. It has to remove the file from the synced folder.": "Zewnętrzna komenda odpowiedzialna za wersjonowanie. Musi usuwać ten plik z synchronizowanego folderu.",
     "Anonymous Usage Reporting": "Anonimowe statystyki użycia",
     "Any devices configured on an introducer device will be added to this device as well.": "Wszystkie urządzenia skonfigurowane na urządzeniu wprowadzającym zostaną dodane także do tego urządzenia.",
-    "Automatic upgrade now offers the choice between stable releases and release candidates.": "Automatic upgrade now offers the choice between stable releases and release candidates.",
+    "Automatic upgrade now offers the choice between stable releases and release candidates.": "Automatyczne aktualizacje pozwalają teraz wybrać pomiędzy wydaniami stabilnymi a wersjami kandydującymi.",
     "Automatic upgrades": "Automatyczne aktualizacje",
     "Be careful!": "Uważaj!",
     "Bugs": "Błędy",
     "CPU Utilization": "Użycie CPU",
     "Changelog": "Historia zmian",
     "Clean out after": "Uporządkuj",
-    "Click to see discovery failures": "Click to see discovery failures",
+    "Click to see discovery failures": "Kliknij aby zobaczyć błędy odnajdywania",
     "Close": "Zamknij",
     "Command": "Polecenie",
     "Comment, when used at the start of a line": "Komentarz, jeżeli użyty na początku linii",
@@ -43,8 +43,8 @@
     "Copied from elsewhere": "Skopiowane z innego miejsca ",
     "Copied from original": "Skopiowane z oryginału",
     "Copyright © 2014-2016 the following Contributors:": "Copyright © 2014-2016: ",
-    "Copyright © 2014-2017 the following Contributors:": "Copyright © 2014-2017 the following Contributors:",
-    "Creating ignore patterns, overwriting an existing file at {%path%}.": "Creating ignore patterns, overwriting an existing file at {{path}}.",
+    "Copyright © 2014-2017 the following Contributors:": "Prawa autorskie © 2014-2017 dla następujących autorów:",
+    "Creating ignore patterns, overwriting an existing file at {%path%}.": "Ustawienie wzorów ignorowania, nadpisze istniejący plik w {{path}}.",
     "Danger!": "Niebezpieczne!",
     "Deleted": "Usunięto",
     "Device": "Urządzenie",
@@ -56,7 +56,7 @@
     "Disconnected": "Rozłączony",
     "Discovered": "Odkryte",
     "Discovery": "Odnajdywanie",
-    "Discovery Failures": "Discovery Failures",
+    "Discovery Failures": "Błędy odnajdowania",
     "Documentation": "Dokumentacja",
     "Download Rate": "Prędkość pobierania",
     "Downloaded": "Pobrane",
@@ -65,23 +65,23 @@
     "Edit Device": "Edytuj urządzenie",
     "Edit Folder": "Edytuj folder",
     "Editing": "Edytowanie",
-    "Editing {%path%}.": "Editing {{path}}.",
+    "Editing {%path%}.": "Edytowanie {{path}}.",
     "Enable NAT traversal": "Włącz trawersowanie NAT",
     "Enable Relaying": "Włącz przekazywanie",
-    "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.",
-    "Enter a non-privileged port number (1024 - 65535).": "Enter a non-privileged port number (1024 - 65535).",
+    "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Wpisz nieujemną liczbę (np. \"2.35\") oraz wybierz jednostkę. Wartość procentowa odnosi się do rozmiaru całego dysku.",
+    "Enter a non-privileged port number (1024 - 65535).": "Wpisz nieuprzywilejowany numer portu (1024-65535).",
     "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Wpisz oddzielone przecinkiem adresy (\"tcp://ip:port\", \"tcp://host:port\") lub \"dynamic\" by przeprowadzić automatyczne odnalezienie adresu.",
     "Enter ignore patterns, one per line.": "Wprowadź wzorce ignorowania, jeden w każdej linii.",
     "Error": "Błąd",
     "External File Versioning": "Zewnętrzne wersjonowanie pliku",
     "Failed Items": "Niepowodzenia",
-    "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.",
+    "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "Błąd połączenia do serwerów IPv6 może wystąpić, jeśli brakuje połączenia po IPv6 w ogóle.",
     "File Pull Order": "Kolejność pobierania plików",
     "File Versioning": "Kontrola wersji",
     "File permission bits are ignored when looking for changes. Use on FAT file systems.": "Uprawnienia plików są ignorowane przy poszukiwaniu zmian. Używaj w systemie plików FAT.",
-    "Files are moved to .stversions directory when replaced or deleted by Syncthing.": "Files are moved to .stversions directory when replaced or deleted by Syncthing.",
+    "Files are moved to .stversions directory when replaced or deleted by Syncthing.": "Pliki są przenoszone do folderu .stversions przez Syncthing, kiedy zostaną zmienione lub usunięte.",
     "Files are moved to .stversions folder when replaced or deleted by Syncthing.": "Pliki przenoszone są do folderu .stversions gdy są zastępowane bądź usuwane przez Syncthing.",
-    "Files are moved to date stamped versions in a .stversions directory when replaced or deleted by Syncthing.": "Files are moved to date stamped versions in a .stversions directory when replaced or deleted by Syncthing.",
+    "Files are moved to date stamped versions in a .stversions directory when replaced or deleted by Syncthing.": "Pliki są datowane i przenoszone do folderu .stversions przez Syncthing, kiedy zostaną zmienione lub usunięte.",
     "Files are moved to date stamped versions in a .stversions folder when replaced or deleted by Syncthing.": "Pliki przenoszone są do wersji oznaczonych datą w folderze .stversions kiedy są zastępowane bądź usuwane przez Syncthing",
     "Files are protected from changes made on other devices, but changes made on this device will be sent to the rest of the cluster.": "Pliki są zabezpieczone przed zmianami na innym urządzeniu, jednak zmiany w tym urządzeniu będą wysłane do reszty.",
     "Folder": "Folder",
@@ -93,11 +93,11 @@
     "GUI": "GUI",
     "GUI Authentication Password": "Hasło",
     "GUI Authentication User": "Użytkownik",
-    "GUI Listen Address": "GUI Listen Address",
+    "GUI Listen Address": "Adres nasłuchu GUI",
     "GUI Listen Addresses": "Adres nasłuchiwania",
     "GUI Theme": "Motyw GUI",
     "Generate": "Generuj",
-    "Global Changes": "Globalne zmiany",
+    "Global Changes": "Zmiany globalne",
     "Global Discovery": "Globalne odnajdywanie",
     "Global Discovery Servers": "Globalne serwery odkrywania",
     "Global State": "Status globalny",
@@ -108,7 +108,7 @@
     "Ignore Permissions": "Ignoruj uprawnienia",
     "Incoming Rate Limit (KiB/s)": "Ograniczenie prędkości odbierania (KiB/s)",
     "Incorrect configuration may damage your folder contents and render Syncthing inoperable.": "Niepoprawna konfiguracja może uszkodzić zawartośc Twojego folderu i uczynić Syncthing niedziałającym.",
-    "Introduced By": "Wprowadzony Przez",
+    "Introduced By": "Wprowadzony przez",
     "Introducer": "Wprowadzający",
     "Inversion of the given condition (i.e. do not exclude)": "Odwrócenie podanego wzorca (np. nie wykluczaj)",
     "Keep Versions": "Zachowuj wersje",
@@ -118,7 +118,7 @@
     "Last seen": "Ostatnio widziany",
     "Later": "Później",
     "Latest Change": "Ostatnia zmiana",
-    "Learn more": "Learn more",
+    "Learn more": "Zobacz więcej",
     "Listeners": "Nasłuchujący",
     "Local Discovery": "Lokalne odnajdywanie",
     "Local State": "Status lokalny",
@@ -136,7 +136,7 @@
     "Newest First": "Najnowsze na początku",
     "No": "Nie",
     "No File Versioning": "Bez wersjonowania pliku",
-    "No upgrades": "Bez aktualizacji",
+    "No upgrades": "Brak aktualizacji",
     "Normal": "Zwykły",
     "Notice": "Wskazówka",
     "OK": "OK",
@@ -150,7 +150,7 @@
     "Override Changes": "Nadpisz zmiany",
     "Path": "Ścieżka",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Ścieżka do lokalnego folderu. Zostanie utworzona jeżeli nie istnieje.\nZnak tyldy (~) może zostać użyty jako skrót do",
-    "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).": "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).",
+    "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).": "Ścieżka gdzie wersje będą przechowywane (pozostaw puste dla domyślnego folderu .stversions we współ. folderze).",
     "Path where versions should be stored (leave empty for the default .stversions folder in the folder).": "Ścieżka gdzie będą przechowywane wersje (pozostaw puste dla domyślnego folderu .stversions)",
     "Pause": "Zatrzymaj",
     "Pause All": "Zatrzymaj wszystkie",
@@ -158,6 +158,8 @@
     "Please consult the release notes before performing a major upgrade.": "Zaleca się przeanalizowanie \"release notes\" przed przeprowadzeniem znaczącej aktualizacji.",
     "Please set a GUI Authentication User and Password in the Settings dialog.": "Ustaw proszę użytkownika i hasło dostępowe do GUI w Ustawieniach",
     "Please wait": "Proszę czekać",
+    "Prefix indicating that the file can be deleted if preventing directory removal": "Prefiks wskazujący, że plik może zostać usunięty w przypadku zapobiegania usunięciu katalogu",
+    "Prefix indicating that the pattern should be matched without case sensitivity": "Prefiks wskazujący, że wzorzec powinien być dopasowany bez rozróżniania wielkości liter",
     "Preview": "Podgląd",
     "Preview Usage Report": "Podgląd raportu użycia.",
     "Quick guide to supported patterns": "Krótki przewodnik po obsługiwanych wzorcach",
@@ -165,7 +167,7 @@
     "Random": "Losowo",
     "Reduced by ignore patterns": "Ograniczono przez wzorce ignorowania",
     "Release Notes": "Informacje o wydaniu",
-    "Release candidates contain the latest features and fixes. They are similar to the traditional bi-weekly Syncthing releases.": "Release candidates contain the latest features and fixes. They are similar to the traditional bi-weekly Syncthing releases.",
+    "Release candidates contain the latest features and fixes. They are similar to the traditional bi-weekly Syncthing releases.": "Wydania kandydujące zawierają najnowsze funkcje oraz poprawki błędów. Są one podobne do tradycyjnych co dwutygodniowych wydań Syncthing.",
     "Remote Devices": "Urządzenia zdalne",
     "Remove": "Usuń",
     "Required identifier for the folder. Must be the same on all cluster devices.": "Wymagany identyfikator dla folderu. Musi być taki sam na wszystkich urządzeniach.",
@@ -202,8 +204,8 @@
     "Single level wildcard (matches within a directory only)": "Wieloznaczność na poziomie plików (uwzględnia nazwy plików)",
     "Smallest First": "Najmniejsze na początku",
     "Source Code": "Kod źródłowy",
-    "Stable releases and release candidates": "Stable releases and release candidates",
-    "Stable releases are delayed by about two weeks. During this time they go through testing as release candidates.": "Stable releases are delayed by about two weeks. During this time they go through testing as release candidates.",
+    "Stable releases and release candidates": "Wydania stabilne i wydania kandydujące",
+    "Stable releases are delayed by about two weeks. During this time they go through testing as release candidates.": "Wydania stabilne są opóźnione ok. dwa tygodnie. W tym czasie są testowane jako wydania kandydujące.",
     "Stable releases only": "Tylko stabilne wydania",
     "Staggered File Versioning": "Rozbudowane wersjonowanie pliku",
     "Start Browser": "Uruchom przeglądarkę",
@@ -245,7 +247,7 @@
     "This Device": "To urządzenie",
     "This can easily give hackers access to read and change any files on your computer.": "Może to umożliwić osobom trzecim dostęp do odczytu i zmian dowolnych plików na urządzeniu.",
     "This is a major version upgrade.": "To jest ważna aktualizacja",
-    "This setting controls the free space required on the home (i.e., index database) disk.": "This setting controls the free space required on the home (i.e., index database) disk.",
+    "This setting controls the free space required on the home (i.e., index database) disk.": "Te ustawienia kontrolują ilość potrzebnej wolnej przestrzeni na dysku domowym (np. indeksowanie bazy danych).",
     "Time": "Czas",
     "Trash Can File Versioning": "Kontrola werjsi plików w koszu",
     "Type": "Typ",
@@ -259,7 +261,7 @@
     "Upgrading": "Aktualizowanie",
     "Upload Rate": "Prędkość wysyłania",
     "Uptime": "Czas działania",
-    "Usage reporting is always enabled for candidate releases.": "Usage reporting is always enabled for candidate releases.",
+    "Usage reporting is always enabled for candidate releases.": "Raportowanie użycia dla wydań kandydujących jest zawsze włączone.",
     "Use HTTPS for GUI": "Używaj HTTPS",
     "Version": "Wersja",
     "Versions Path": "Ścieżka wersji",
@@ -271,8 +273,9 @@
     "When adding a new device, keep in mind that this device must be added on the other side too.": "Gdy dodajesz nowe urządzenie, pamiętaj że urządzenie musi zostać dodane także po drugiej stronie.",
     "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Przy dodawaniu nowego folderu, pamiętaj, że ID użyte jest do łączenia folderów pomiędzy urządzeniami. Wielkość liter ciągu ma znaczenie musi zgadzać się na wszystkich urządzeniach.",
     "Yes": "Tak",
-    "You can change your choice at any time in the Settings dialog.": "Możesz zmienić swój wybór w dowolnej chwili w oknie Ustawień.",
-    "You can read more about the two release channels at the link below.": "You can read more about the two release channels at the link below.",
+    "You can also select one of these nearby devices:": "Możesz również wybrać jedno z pobliskich urządzeń:",
+    "You can change your choice at any time in the Settings dialog.": "Możesz zmienić swój wybór w dowolnej chwili w Ustawieniach",
+    "You can read more about the two release channels at the link below.": "Możesz więcej poczytać na temat obydwu wydań klikając poniższy link.",
     "You must keep at least one version.": "Musisz posiadać przynajmniej jedną wersję",
     "days": "dni",
     "directories": "katalogi",

gui/default/assets/lang/lang-pt-BR.json

@@ -158,6 +158,8 @@
     "Please consult the release notes before performing a major upgrade.": "Por favor, consulte as notas de lançamento antes de atualizar para uma versão \"major\".",
     "Please set a GUI Authentication User and Password in the Settings dialog.": "Por favor, defina um nome de usuário e senha para acesso à interface web, nas configurações.",
     "Please wait": "Aguarde",
+    "Prefix indicating that the file can be deleted if preventing directory removal": "Prefix indicating that the file can be deleted if preventing directory removal",
+    "Prefix indicating that the pattern should be matched without case sensitivity": "Prefix indicating that the pattern should be matched without case sensitivity",
     "Preview": "Visualizar",
     "Preview Usage Report": "Visualizar relatório de uso",
     "Quick guide to supported patterns": "Guia rápido dos padrões suportados",
@@ -271,6 +273,7 @@
     "When adding a new device, keep in mind that this device must be added on the other side too.": "Quando estiver adicionando um dispositivo, lembre-se de que este dispositivo deve ser adicionado do outro lado também.",
     "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Quando adicionar uma nova pasta, lembre-se que o ID da pasta é utilizado para ligar pastas entre dispositivos. Ele é sensível às diferenças entre maiúsculas e minúsculas e deve ser o mesmo em todos os dispositivos.",
     "Yes": "Sim",
+    "You can also select one of these nearby devices:": "You can also select one of these nearby devices:",
     "You can change your choice at any time in the Settings dialog.": "Você pode mudar de ideia a qualquer momento na tela de configurações.",
     "You can read more about the two release channels at the link below.": "Você pode se informar melhor sobre os dois canais de lançamento no link abaixo.",
     "You must keep at least one version.": "Você deve manter pelo menos uma versão.",

gui/default/assets/lang/lang-pt-PT.json

@@ -136,7 +136,7 @@
     "Newest First": "Primeiro os mais recentes",
     "No": "Não",
     "No File Versioning": "Nenhuma",
-    "No upgrades": "Não existem actualizações",
+    "No upgrades": "Sem actualizações",
     "Normal": "Normal",
     "Notice": "Avisos",
     "OK": "OK",
@@ -158,6 +158,8 @@
     "Please consult the release notes before performing a major upgrade.": "Consulte as notas de lançamento antes de fazer uma actualização importante.",
     "Please set a GUI Authentication User and Password in the Settings dialog.": "Por favor, defina um utilizador e senha de autenticação para a interface gráfica, nas configurações.",
     "Please wait": "Aguarde",
+    "Prefix indicating that the file can be deleted if preventing directory removal": "Prefixo para indicar que o ficheiro pode ser eliminado se estiver a impedir a eliminação da pasta",
+    "Prefix indicating that the pattern should be matched without case sensitivity": "Prefixo para indicar que o padrão não diferencia entre maiúsculas e minúsculas",
     "Preview": "Previsão",
     "Preview Usage Report": "Pré-visualizar relatório de utilização",
     "Quick guide to supported patterns": "Guia rápido dos padrões suportados",
@@ -271,6 +273,7 @@
     "When adding a new device, keep in mind that this device must be added on the other side too.": "Quando adicionar um novo dispositivo, lembre-se que este dispositivo tem que ser adicionado do outro lado também.",
     "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Quando adicionar uma nova pasta, lembre-se que o ID da pasta é utilizado para ligar as pastas entre dispositivos. É sensível às diferenças entre maiúsculas e minúsculas e tem que ter uma correspondência perfeita entre todos os dispositivos.",
     "Yes": "Sim",
+    "You can also select one of these nearby devices:": "Também pode seleccionar um destes dispositivos que estão próximos:",
     "You can change your choice at any time in the Settings dialog.": "Pode modificar a sua escolha em qualquer altura nas configurações.",
     "You can read more about the two release channels at the link below.": "Pode ler mais sobre os dois canais de lançamento na ligação abaixo.",
     "You must keep at least one version.": "Tem que manter pelo menos uma versão.",

gui/default/assets/lang/lang-ru.json

@@ -19,9 +19,9 @@
     "Advanced settings": "Дополнительные настройки",
     "All Data": "Все данные",
     "Allow Anonymous Usage Reporting?": "Разрешить анонимный отчет об использовании?",
-    "Allowed Networks": "Allowed Networks",
+    "Allowed Networks": "Разрешённые сети",
     "Alphabetic": "По алфавиту",
-    "An external command handles the versioning. It has to remove the file from the shared folder.": "An external command handles the versioning. It has to remove the file from the shared folder.",
+    "An external command handles the versioning. It has to remove the file from the shared folder.": "Для версионирования используется внешняя программа. Ей нужно удалить файл из общей папки.",
     "An external command handles the versioning. It has to remove the file from the synced folder.": "Внешний процесс управляет версиями файлов.  Процесс удалит файл из синхронизируемой папки.",
     "Anonymous Usage Reporting": "Анонимный отчет об использовании",
     "Any devices configured on an introducer device will be added to this device as well.": "Все устройства, подключённые к устройству-рекомендателю, будут добавлены к текущему устройству.",
@@ -43,7 +43,7 @@
     "Copied from elsewhere": "Скопировано из другого места",
     "Copied from original": "Скопировано с оригинала",
     "Copyright © 2014-2016 the following Contributors:": "Авторские права © 2014–2016 принадлежат:",
-    "Copyright © 2014-2017 the following Contributors:": "Авторское право © 2014-2017 следующие участники:",
+    "Copyright © 2014-2017 the following Contributors:": "Авторские права © 2014—2017 следующие участники:",
     "Creating ignore patterns, overwriting an existing file at {%path%}.": "Creating ignore patterns, overwriting an existing file at {{path}}.",
     "Danger!": "Опасно!",
     "Deleted": "Удалено",
@@ -65,23 +65,23 @@
     "Edit Device": "Редактирование устройства",
     "Edit Folder": "Редактирование папки",
     "Editing": "Редактирование",
-    "Editing {%path%}.": "Editing {{path}}.",
+    "Editing {%path%}.": "Правка {{path}}.",
     "Enable NAT traversal": "Включить NAT traversal",
     "Enable Relaying": "Включить релеи",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.",
-    "Enter a non-privileged port number (1024 - 65535).": "Enter a non-privileged port number (1024 - 65535).",
+    "Enter a non-privileged port number (1024 - 65535).": "Введите непривилегированный порт (1024—65535).",
     "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Введите через запятую («tcp://ip:port», «tcp://host:port») адреса, либо «dynamic», чтобы выполнить автоматическое обнаружение адреса.",
     "Enter ignore patterns, one per line.": "Введите шаблоны игнорирования, по одному на строку.",
     "Error": "Ошибка",
     "External File Versioning": "Внешний контроль версий файлов",
     "Failed Items": "Сбои",
-    "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.",
+    "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "Если нет IPv6-соединений, при подключении к IPv6-серверам произойдёт ошибка.",
     "File Pull Order": "Порядок получения файлов",
     "File Versioning": "Управление версиями",
     "File permission bits are ignored when looking for changes. Use on FAT file systems.": "Права на файлы игнорируются при поиске изменений. Используется на файловой системе FAT.",
-    "Files are moved to .stversions directory when replaced or deleted by Syncthing.": "Files are moved to .stversions directory when replaced or deleted by Syncthing.",
+    "Files are moved to .stversions directory when replaced or deleted by Syncthing.": "Когда Syncthing изменяет или удаляет файлы, они помещаются в папку .stversions",
     "Files are moved to .stversions folder when replaced or deleted by Syncthing.": "Файлы перемещаются в папку .stversions после их замены или удаления системой Syncthing.",
-    "Files are moved to date stamped versions in a .stversions directory when replaced or deleted by Syncthing.": "Files are moved to date stamped versions in a .stversions directory when replaced or deleted by Syncthing.",
+    "Files are moved to date stamped versions in a .stversions directory when replaced or deleted by Syncthing.": "Когда Syncthing изменяет или удаляет файлы, их версии с таймштампами помещаются в папку .stversions",
     "Files are moved to date stamped versions in a .stversions folder when replaced or deleted by Syncthing.": "Файлы с временнОй меткой версии помещаются в папку .stversions при их замене или удалении Syncthing.",
     "Files are protected from changes made on other devices, but changes made on this device will be sent to the rest of the cluster.": "Файлы защищены от изменений сделанных на других устройствах, но изменения сделанные на этом устройстве будут отправлены всему кластеру.",
     "Folder": "Папка",
@@ -97,7 +97,7 @@
     "GUI Listen Addresses": "Адрес панели управления",
     "GUI Theme": "Тема оформления",
     "Generate": "Сгенерировать",
-    "Global Changes": "Global Changes",
+    "Global Changes": "Глобальные изменения",
     "Global Discovery": "Глобальное обнаружение",
     "Global Discovery Servers": "Серверы глобального обнаружения",
     "Global State": "Глобальное состояние",
@@ -150,7 +150,7 @@
     "Override Changes": "Перезаписать изменения",
     "Path": "Путь",
     "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Путь к папке на локальном компьютере. Если её не существует, то она будет создана. Тильда (~) может использоваться как сокращение для",
-    "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).": "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).",
+    "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).": "Путь, в котором нужно хранить версии (оставьте пустым для папки по умолчанию .stversions внутри общей папки).",
     "Path where versions should be stored (leave empty for the default .stversions folder in the folder).": "Путь, где должны храниться версии (оставьте пустым, чтобы использовать папку по умолчанию .stversions внутри папки).",
     "Pause": "Пауза",
     "Pause All": "Приостановить все",
@@ -158,6 +158,8 @@
     "Please consult the release notes before performing a major upgrade.": "Перед проведением обновления основной версии ознакомтесь, пожалуйста, с Замечаниями к версии",
     "Please set a GUI Authentication User and Password in the Settings dialog.": "Установите имя пользователя и пароль для интерфейса в настройках",
     "Please wait": "Пожалуйста, подождите",
+    "Prefix indicating that the file can be deleted if preventing directory removal": "Prefix indicating that the file can be deleted if preventing directory removal",
+    "Prefix indicating that the pattern should be matched without case sensitivity": "Prefix indicating that the pattern should be matched without case sensitivity",
     "Preview": "Предварительный просмотр",
     "Preview Usage Report": "Посмотреть отчёт об использовании",
     "Quick guide to supported patterns": "Краткое руководство по поддерживаемым шаблонам",
@@ -245,7 +247,7 @@
     "This Device": "Это устройство",
     "This can easily give hackers access to read and change any files on your computer.": "Это может дать доступ хакерам для чтения и изменения любых файлов на вашем компьютере.",
     "This is a major version upgrade.": "Это обновление основной версии продукта.",
-    "This setting controls the free space required on the home (i.e., index database) disk.": "This setting controls the free space required on the home (i.e., index database) disk.",
+    "This setting controls the free space required on the home (i.e., index database) disk.": "Эта настройка управляет свободным местом, необходимым на домашнем диске (например, для базы индексов).",
     "Time": "Время",
     "Trash Can File Versioning": "Использовать версионность для файлов в Корзине",
     "Type": "Тип",
@@ -264,13 +266,14 @@
     "Version": "Версия",
     "Versions Path": "Путь к версиям",
     "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "Версии удаляются автоматически, если они существуют дольше максимального срока или превышают разрешённое количество файлов за интервал.",
-    "Warning, this path is a parent directory of an existing folder \"{%otherFolder%}\".": "Warning, this path is a parent directory of an existing folder \"{{otherFolder}}\".",
-    "Warning, this path is a parent directory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Warning, this path is a parent directory of an existing folder \"{{otherFolderLabel}}\" ({{otherFolder}}).",
+    "Warning, this path is a parent directory of an existing folder \"{%otherFolder%}\".": "Внимание! Этот путь — родительская директория уже существующей папки «{{otherFolder}}».",
+    "Warning, this path is a parent directory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Внимание! Этот путь — родительская директория уже существующей папки «{{otherFolderLabel}}» ({{otherFolder}}).",
     "Warning, this path is a subdirectory of an existing folder \"{%otherFolder%}\".": "Осторожно, этот путь является подкаталогом существующей папки «{{otherFolder}}».",
-    "Warning, this path is a subdirectory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Warning, this path is a subdirectory of an existing folder \"{{otherFolderLabel}}\" ({{otherFolder}}).",
+    "Warning, this path is a subdirectory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Внимание! Этот путь — поддиректория уже существующей папки «{{otherFolderLabel}}» ({{otherFolder}}).",
     "When adding a new device, keep in mind that this device must be added on the other side too.": "Когда добавляете устройство, помните о том, что это же устройство должно быть добавлено и другой стороной.",
     "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Когда добавляете новую папку, помните, что ID папок используются для того, чтобы связывать папки между всеми устройствами. Они чувствительны к регистру и должны совпадать на всех используемых устройствах.",
     "Yes": "Да",
+    "You can also select one of these nearby devices:": "Вы можете выбрать из этих устройств рядом:",
     "You can change your choice at any time in the Settings dialog.": "Выбор можно изменить в любой момент в диалоге настроек.",
     "You can read more about the two release channels at the link below.": "О двух каналах выпусков можно почитать подробнее по нижеприведённой ссылке.",
     "You must keep at least one version.": "Вы должны хранить как минимум одну версию.",

gui/default/assets/lang/lang-sk.json

@@ -18,7 +18,7 @@
     "Advanced Configuration": "Pokročilá konfigurácia",
     "Advanced settings": "Pokročilé nastavenia",
     "All Data": "Všetky dáta",
-    "Allow Anonymous Usage Reporting?": "Povoliť anoynmné hlásenie o použivaní?",
+    "Allow Anonymous Usage Reporting?": "Povoliť anoynmné hlásenia o použivaní?",
     "Allowed Networks": "Povolené siete",
     "Alphabetic": "Abecedne",
     "An external command handles the versioning. It has to remove the file from the shared folder.": "Externý príkaz obstaráva verzie. Musí odstrániť ",
@@ -28,11 +28,11 @@
     "Automatic upgrade now offers the choice between stable releases and release candidates.": "Automatická aktualizácia teraz ponúka voľbu medzi stabilnými vydaniami a kandidátmi na vydanie.",
     "Automatic upgrades": "Automatické aktualizácie",
     "Be careful!": "Buď opatrný!",
-    "Bugs": "Cyhby",
+    "Bugs": "Chyby",
     "CPU Utilization": "Využitie CPU",
     "Changelog": "Záznam zmien",
     "Clean out after": "Vyčistenie po",
-    "Click to see discovery failures": "Klikni pre zobrazenie zlyhaní objavovania.",
+    "Click to see discovery failures": "Kliknite pre zobrazenie zlyhaní zisťovania.",
     "Close": "Zatvoriť",
     "Command": "Príkaz",
     "Comment, when used at the start of a line": "Komentár, keď použité na začiatku riadku",
@@ -44,7 +44,7 @@
     "Copied from original": "Skopírované z originálu",
     "Copyright © 2014-2016 the following Contributors:": "Copyright © 2014-2016 následujúci prispivatelia:",
     "Copyright © 2014-2017 the following Contributors:": "Copyright © 2014-2017 následujúci prispivatelia:",
-    "Creating ignore patterns, overwriting an existing file at {%path%}.": "Creating ignore patterns, overwriting an existing file at {{path}}.",
+    "Creating ignore patterns, overwriting an existing file at {%path%}.": "Vytváranie vzorov ignorovania, prepísanie existujúceho súboru v {{path}}.",
     "Danger!": "Pozor!",
     "Deleted": "Zmazané",
     "Device": "Zariadenie",
@@ -54,9 +54,9 @@
     "Device Name": "Názov zariadenia",
     "Devices": "Zariadenia",
     "Disconnected": "Odpojené",
-    "Discovered": "Objavené",
-    "Discovery": "Objavenie",
-    "Discovery Failures": "Zlyhania objavovania",
+    "Discovered": "Zistené",
+    "Discovery": "Zisťovanie",
+    "Discovery Failures": "Zlyhania zisťovania",
     "Documentation": "Dokumentácia",
     "Download Rate": "Rýchlosť sťahovania",
     "Downloaded": "Stiahnuté",
@@ -69,7 +69,7 @@
     "Enable NAT traversal": "Povoliť priechod NAT",
     "Enable Relaying": "Povoliť prenosové uzly",
     "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Vložte kladné číslo (napr. \"2,35\") a zvoľte jednotku. Percentá sa zobrazujú ako časť celkovej veľkosti disku.",
-    "Enter a non-privileged port number (1024 - 65535).": "Enter a non-privileged port number (1024 - 65535).",
+    "Enter a non-privileged port number (1024 - 65535).": "Vložte číslo neprivilegovaného portu (1024-65535).",
     "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Zadaj čiarkou oddelené  (\"tcp://ip:port\", \"tcp://host:port\") adresy alebo \"dynamic\" na automatické zistenie adresy.",
     "Enter ignore patterns, one per line.": "Zadaj ignorované vzory, jeden na riadok.",
     "Error": "Chyba",
@@ -93,14 +93,14 @@
     "GUI": "GUI",
     "GUI Authentication Password": "Prihlasovacie heslo do GUI",
     "GUI Authentication User": "Prihlasovacie meno do GUI",
-    "GUI Listen Address": "GUI Listen Address",
+    "GUI Listen Address": "Adresa pre prístup do GUI",
     "GUI Listen Addresses": "Adresa pre prístup do GUI",
     "GUI Theme": "Grafická téma GUI",
     "Generate": "Generovať",
     "Global Changes": "Globálne zmeny",
-    "Global Discovery": "Globálne hľadanie",
-    "Global Discovery Servers": "Global Discovery Servers",
-    "Global State": "Global State",
+    "Global Discovery": "Globálne vyhľadávanie",
+    "Global Discovery Servers": "Globálne zisťovacie servery",
+    "Global State": "Globálny status",
     "Help": "Pomoc",
     "Home page": "Domovská stránka",
     "Ignore": "Ignorovať",
@@ -158,6 +158,8 @@
     "Please consult the release notes before performing a major upgrade.": "Pred spustením hlavnej aktualizácie si prosím prečítajte poznámky k vydaniu.",
     "Please set a GUI Authentication User and Password in the Settings dialog.": "Zadajte prosím prihlasovanie meno a heslo v dialógovom okne nastavení.",
     "Please wait": "Prosím čakajte",
+    "Prefix indicating that the file can be deleted if preventing directory removal": "Prefix označujúci, že súbor môže byť odstránený, ak bráni odstráneniu adresára.",
+    "Prefix indicating that the pattern should be matched without case sensitivity": "Prefix označujúci, že vzory by mali ignorovať veľkosť písma.",
     "Preview": "Náhľad",
     "Preview Usage Report": "Náhľad záznamu o používaní",
     "Quick guide to supported patterns": "Rýchly sprievodca podporovanými vzormi",
@@ -165,7 +167,7 @@
     "Random": "Náhodne",
     "Reduced by ignore patterns": "Znížené o ignorované vzory",
     "Release Notes": "Poznámky k vydaniu",
-    "Release candidates contain the latest features and fixes. They are similar to the traditional bi-weekly Syncthing releases.": "Release candidates contain the latest features and fixes. They are similar to the traditional bi-weekly Syncthing releases.",
+    "Release candidates contain the latest features and fixes. They are similar to the traditional bi-weekly Syncthing releases.": "Kandidáti na vydanie obsahujú najnovšie vlastnosti a opravy. Sú podobné tradičným dvojtýždenným vydaniam programu Syncthing.",
     "Remote Devices": "Vzdialené zariadenia",
     "Remove": "Odstrániť",
     "Required identifier for the folder. Must be the same on all cluster devices.": "Potrebný identifikátor pre adresár. Musí byť rovnaký na všetkých zariadeniach v skupine.",
@@ -186,99 +188,100 @@
     "Send & Receive": "Prijímať a odosielať",
     "Send Only": "Iba odosielať",
     "Settings": "Nastavenia",
-    "Share": "Share",
-    "Share Folder": "Share Folder",
-    "Share Folders With Device": "Share Folders With Device",
-    "Share With Devices": "Share With Devices",
-    "Share this folder?": "Share this folder?",
-    "Shared With": "Shared With",
-    "Show ID": "Show ID",
-    "Show QR": "Show QR",
-    "Shown instead of Device ID in the cluster status. Will be advertised to other devices as an optional default name.": "Shown instead of Device ID in the cluster status. Will be advertised to other devices as an optional default name.",
-    "Shown instead of Device ID in the cluster status. Will be updated to the name the device advertises if left empty.": "Shown instead of Device ID in the cluster status. Will be updated to the name the device advertises if left empty.",
+    "Share": "Zdieľať",
+    "Share Folder": "Zdieľať adresár",
+    "Share Folders With Device": "Zdieľať adresáre so zariadením",
+    "Share With Devices": "Zdieľať so zariadeniami",
+    "Share this folder?": "Zdieľať tento adresár?",
+    "Shared With": "Zdieľané s",
+    "Show ID": "Zobraziť ID",
+    "Show QR": "Zobraziť QR",
+    "Shown instead of Device ID in the cluster status. Will be advertised to other devices as an optional default name.": "Zobrazované namiesto ID zariadenia v štatúte klastra. Toto pomenovanie bude oznamovať ostatným zariadeniam ako voliteľné predvolené pomenovanie.",
+    "Shown instead of Device ID in the cluster status. Will be updated to the name the device advertises if left empty.": "Zobrazované namiesto ID zariadenia v klastri. Ak je ponechané prázdne, bude nahradené pomenovaním, ktoré oznamuje zariadenie.",
     "Shutdown": "Vypnutie",
-    "Shutdown Complete": "Shutdown Complete",
+    "Shutdown Complete": "Vypnutie ukončené",
     "Simple File Versioning": "Jednoduché verzie súborov",
     "Single level wildcard (matches within a directory only)": "Single level wildcard (matches within a directory only)",
-    "Smallest First": "Smallest First",
-    "Source Code": "Source Code",
-    "Stable releases and release candidates": "Stable releases and release candidates",
-    "Stable releases are delayed by about two weeks. During this time they go through testing as release candidates.": "Stable releases are delayed by about two weeks. During this time they go through testing as release candidates.",
-    "Stable releases only": "Stable releases only",
+    "Smallest First": "Najmenší najprv",
+    "Source Code": "Zdrojový kód",
+    "Stable releases and release candidates": "Stabilné verzie a kandidáti na vydanie",
+    "Stable releases are delayed by about two weeks. During this time they go through testing as release candidates.": "Stabilné vydania sú odložené asi o dva týždne. Počas tejto doby prechádzajú testovaním ako kandidáti na vydanie.",
+    "Stable releases only": "Iba stabilné verzie",
     "Staggered File Versioning": "Rozložené verzie súborov",
-    "Start Browser": "Start Browser",
-    "Statistics": "Statistics",
-    "Stopped": "Stopped",
-    "Support": "Support",
-    "Sync Protocol Listen Addresses": "Sync Protocol Listen Addresses",
-    "Syncing": "Syncing",
-    "Syncthing has been shut down.": "Syncthing has been shut down.",
-    "Syncthing includes the following software or portions thereof:": "Syncthing includes the following software or portions thereof:",
-    "Syncthing is restarting.": "Syncthing is restarting.",
-    "Syncthing is upgrading.": "Syncthing is upgrading.",
-    "Syncthing seems to be down, or there is a problem with your Internet connection. Retrying…": "Syncthing seems to be down, or there is a problem with your Internet connection. Retrying…",
+    "Start Browser": "Spusti prehliadač",
+    "Statistics": "Štatistika",
+    "Stopped": "Zastavené",
+    "Support": "Podpora",
+    "Sync Protocol Listen Addresses": "Adresa načúvania synchronizačného protokolu",
+    "Syncing": "Synchronizácia",
+    "Syncthing has been shut down.": "Syncthing bol vypnutý.",
+    "Syncthing includes the following software or portions thereof:": "Syncthing obsahuje nasledujúci software nebo jeho časti:",
+    "Syncthing is restarting.": "Syncthing sa reštartuje.",
+    "Syncthing is upgrading.": "Syncthing sa aktualizuje.",
+    "Syncthing seems to be down, or there is a problem with your Internet connection. Retrying…": "Syncthing se zdá byť nefunkčný, alebo je problém s internetovým pripojením. Opakujem...",
     "Syncthing seems to be experiencing a problem processing your request. Please refresh the page or restart Syncthing if the problem persists.": "Syncthing seems to be experiencing a problem processing your request. Please refresh the page or restart Syncthing if the problem persists.",
     "The Syncthing admin interface is configured to allow remote access without a password.": "The Syncthing admin interface is configured to allow remote access without a password.",
-    "The aggregated statistics are publicly available at the URL below.": "The aggregated statistics are publicly available at the URL below.",
+    "The aggregated statistics are publicly available at the URL below.": "Súhrnné štatistiky sú verejne dostupné na uvedenej URL.",
     "The configuration has been saved but not activated. Syncthing must restart to activate the new configuration.": "The configuration has been saved but not activated. Syncthing must restart to activate the new configuration.",
-    "The device ID cannot be blank.": "The device ID cannot be blank.",
-    "The device ID to enter here can be found in the \"Actions > Show ID\" dialog on the other device. Spaces and dashes are optional (ignored).": "The device ID to enter here can be found in the \"Actions > Show ID\" dialog on the other device. Spaces and dashes are optional (ignored).",
+    "The device ID cannot be blank.": "ID zariadenia nemôže byť prázdne.",
+    "The device ID to enter here can be found in the \"Actions > Show ID\" dialog on the other device. Spaces and dashes are optional (ignored).": "ID zariadenie pre vloženie môžete nájsť na druhom zariadení v dialógu \"Akcia > Zobraziť ID\". Medzery a pomlčky sú voliteľné (ignorované).",
     "The encrypted usage report is sent daily. It is used to track common platforms, folder sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.": "The encrypted usage report is sent daily. It is used to track common platforms, folder sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.",
     "The entered device ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.": "The entered device ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.",
     "The first command line parameter is the folder path and the second parameter is the relative path in the folder.": "The first command line parameter is the folder path and the second parameter is the relative path in the folder.",
     "The folder ID cannot be blank.": "The folder ID cannot be blank.",
-    "The folder ID must be unique.": "The folder ID must be unique.",
-    "The folder path cannot be blank.": "The folder path cannot be blank.",
+    "The folder ID must be unique.": "ID adresára musí byť jedinečné.",
+    "The folder path cannot be blank.": "Cesta k adresáru nemôže byť prázdna.",
     "The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.": "The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.",
     "The following items could not be synchronized.": "The following items could not be synchronized.",
-    "The maximum age must be a number and cannot be blank.": "The maximum age must be a number and cannot be blank.",
+    "The maximum age must be a number and cannot be blank.": "Maximálny vek musí byť číslo a nemôže byť prázdne.",
     "The maximum time to keep a version (in days, set to 0 to keep versions forever).": "The maximum time to keep a version (in days, set to 0 to keep versions forever).",
-    "The minimum free disk space percentage must be a non-negative number between 0 and 100 (inclusive).": "The minimum free disk space percentage must be a non-negative number between 0 and 100 (inclusive).",
-    "The number of days must be a number and cannot be blank.": "The number of days must be a number and cannot be blank.",
-    "The number of days to keep files in the trash can. Zero means forever.": "The number of days to keep files in the trash can. Zero means forever.",
-    "The number of old versions to keep, per file.": "The number of old versions to keep, per file.",
-    "The number of versions must be a number and cannot be blank.": "The number of versions must be a number and cannot be blank.",
-    "The path cannot be blank.": "The path cannot be blank.",
-    "The rate limit must be a non-negative number (0: no limit)": "The rate limit must be a non-negative number (0: no limit)",
+    "The minimum free disk space percentage must be a non-negative number between 0 and 100 (inclusive).": "Minimálne voľné miesto na disku v percentách musí byť kladné číslo medzi 0 a 100 (vrátane).",
+    "The number of days must be a number and cannot be blank.": "Počet dní musí byť číslo a nemôže byť prázdny.",
+    "The number of days to keep files in the trash can. Zero means forever.": "Počet dní pre uchovanie súborov v koši. Nula znamená navždy.",
+    "The number of old versions to keep, per file.": "Počet uchovávaných starších verzií pre každý súbor.",
+    "The number of versions must be a number and cannot be blank.": "Počet verzií musí byť číslo a nemôže byť prázdny.",
+    "The path cannot be blank.": "Cesta nemôže byť prázdna.",
+    "The rate limit must be a non-negative number (0: no limit)": "Limit rýchlosti musí byť kladné číslo (0: bez limitu)",
     "The rescan interval must be a non-negative number of seconds.": "The rescan interval must be a non-negative number of seconds.",
     "They are retried automatically and will be synced when the error is resolved.": "They are retried automatically and will be synced when the error is resolved.",
-    "This Device": "This Device",
+    "This Device": "Toto zariadenie",
     "This can easily give hackers access to read and change any files on your computer.": "This can easily give hackers access to read and change any files on your computer.",
-    "This is a major version upgrade.": "This is a major version upgrade.",
-    "This setting controls the free space required on the home (i.e., index database) disk.": "This setting controls the free space required on the home (i.e., index database) disk.",
-    "Time": "Time",
+    "This is a major version upgrade.": "Toto je hlavná aktualizácia.",
+    "This setting controls the free space required on the home (i.e., index database) disk.": "Toto nastavenie kontroluje voľné miesto požadované na domovskom disku (napr. indexová databáza).",
+    "Time": "Čas",
     "Trash Can File Versioning": "Verzie súborov v koši",
-    "Type": "Type",
-    "Unknown": "Unknown",
-    "Unshared": "Unshared",
-    "Unused": "Unused",
-    "Up to Date": "Up to Date",
-    "Updated": "Updated",
-    "Upgrade": "Upgrade",
-    "Upgrade To {%version%}": "Upgrade To {{version}}",
-    "Upgrading": "Upgrading",
-    "Upload Rate": "Upload Rate",
-    "Uptime": "Uptime",
-    "Usage reporting is always enabled for candidate releases.": "Usage reporting is always enabled for candidate releases.",
+    "Type": "Typ",
+    "Unknown": "Neznáme",
+    "Unshared": "Nezdieľané",
+    "Unused": "Nepoužité",
+    "Up to Date": "Aktuálne",
+    "Updated": "Aktualizované",
+    "Upgrade": "Aktualizácia",
+    "Upgrade To {%version%}": "Aktualizovať na {{version}}",
+    "Upgrading": "Aktualizácia",
+    "Upload Rate": "Rýchlosť odosielania",
+    "Uptime": "Doba prevádzky",
+    "Usage reporting is always enabled for candidate releases.": "Hlásenia o používaní sú pri kandidátoch na vydanie vždy povolené.",
     "Use HTTPS for GUI": "Use HTTPS for GUI",
-    "Version": "Version",
-    "Versions Path": "Versions Path",
-    "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.",
+    "Version": "Verzia",
+    "Versions Path": "Cesta k verziám",
+    "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "Verzie sú automaticky zmazané ak sú staršie ako je maximálny časový limit alebo presiahnu počet súborov povolených v danom intervale.",
     "Warning, this path is a parent directory of an existing folder \"{%otherFolder%}\".": "Warning, this path is a parent directory of an existing folder \"{{otherFolder}}\".",
     "Warning, this path is a parent directory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Warning, this path is a parent directory of an existing folder \"{{otherFolderLabel}}\" ({{otherFolder}}).",
     "Warning, this path is a subdirectory of an existing folder \"{%otherFolder%}\".": "Warning, this path is a subdirectory of an existing folder \"{{otherFolder}}\".",
     "Warning, this path is a subdirectory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Warning, this path is a subdirectory of an existing folder \"{{otherFolderLabel}}\" ({{otherFolder}}).",
     "When adding a new device, keep in mind that this device must be added on the other side too.": "When adding a new device, keep in mind that this device must be added on the other side too.",
     "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.",
-    "Yes": "Yes",
-    "You can change your choice at any time in the Settings dialog.": "You can change your choice at any time in the Settings dialog.",
-    "You can read more about the two release channels at the link below.": "You can read more about the two release channels at the link below.",
-    "You must keep at least one version.": "You must keep at least one version.",
-    "days": "days",
-    "directories": "directories",
-    "files": "files",
-    "full documentation": "full documentation",
-    "items": "items",
-    "{%device%} wants to share folder \"{%folder%}\".": "{{device}} wants to share folder \"{{folder}}\".",
-    "{%device%} wants to share folder \"{%folderlabel%}\" ({%folder%}).": "{{device}} wants to share folder \"{{folderlabel}}\" ({{folder}})."
+    "Yes": "Áno",
+    "You can also select one of these nearby devices:": "You can also select one of these nearby devices:",
+    "You can change your choice at any time in the Settings dialog.": "Voľbu môžete kedykoľvek zmeniť v dialógu Nastavenia.",
+    "You can read more about the two release channels at the link below.": "O dvoch vydávacích kanáloch si môžete viacej prečítať v odkaze nižšie.",
+    "You must keep at least one version.": "Musíte ponechať aspoň jednu verziu",
+    "days": "dní",
+    "directories": "adresáre",
+    "files": "súbory",
+    "full documentation": "úplná dokumntácia",
+    "items": "položiek",
+    "{%device%} wants to share folder \"{%folder%}\".": "{{device}} chce zdieľať adresár \"{{folder}}\".",
+    "{%device%} wants to share folder \"{%folderlabel%}\" ({%folder%}).": "{{device}} chce zdieľať adresár \"{{folderlabel}}\" ({{folder}})."
 }

gui/default/assets/lang/lang-sv.json

@@ -158,6 +158,8 @@
     "Please consult the release notes before performing a major upgrade.": "Läs igenom versionsnyheterna innan den stora uppgraderingen.",
     "Please set a GUI Authentication User and Password in the Settings dialog.": "Ställ in ett grafiska gränssnittets användarautentisering och lösenord i inställningsdialogrutan.",
     "Please wait": "Var god vänta",
+    "Prefix indicating that the file can be deleted if preventing directory removal": "Prefix som indikerar att filen kan raderas om det förhindrar borttagning av katalog",
+    "Prefix indicating that the pattern should be matched without case sensitivity": "Prefix som indikerar att mönstret ska matchas utan skiftlägeskänslighet",
     "Preview": "Förhandsgranska",
     "Preview Usage Report": "Förhandsgranska statistik",
     "Quick guide to supported patterns": "Snabb handledning till mönster som stöds",
@@ -271,6 +273,7 @@
     "When adding a new device, keep in mind that this device must be added on the other side too.": "När du lägger till en ny enhet, kom ihåg att den här enheten måste läggas till på den andra enheten också.",
     "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "När du lägger till ny mapp, tänk på att mapp-ID knyter ihop mappar mellan olika enheter. De skiftlägeskänsliga och måste matcha precis mellan alla enheter.",
     "Yes": "Ja",
+    "You can also select one of these nearby devices:": "Du kan också välja en av dessa närliggande enheter:",
     "You can change your choice at any time in the Settings dialog.": "Du kan ändra ditt val när som helst i inställningsdialogrutan.",
     "You can read more about the two release channels at the link below.": "Du kan läsa mer om de två publiceringsskanalerna på länken nedan.",
     "You must keep at least one version.": "Du måste behålla åtminstone en version.",

gui/default/assets/lang/lang-tr.json

@@ -158,6 +158,8 @@
     "Please consult the release notes before performing a major upgrade.": "Birincil bir yükseltme gerçekleştirmeden önce lütfen sürüm notlarını tetkik edin.",
     "Please set a GUI Authentication User and Password in the Settings dialog.": "GUI üzerinden Kimlik Doğrulaması yapmak için Ayarlar penceresinde Kullanıcı ve Parola tanımlayın lütfen.",
     "Please wait": "Lütfen Bekleyin",
+    "Prefix indicating that the file can be deleted if preventing directory removal": "Prefix indicating that the file can be deleted if preventing directory removal",
+    "Prefix indicating that the pattern should be matched without case sensitivity": "Prefix indicating that the pattern should be matched without case sensitivity",
     "Preview": "Önizleme",
     "Preview Usage Report": "Kullanım raporunu gözden geçir",
     "Quick guide to supported patterns": "Desteklenen kalıp dizileri için hızlı rehber",
@@ -271,6 +273,7 @@
     "When adding a new device, keep in mind that this device must be added on the other side too.": "Yeni bir aygıt eklendiğinde, bu aygıtın karşı tarafa da eklenmesi gerektiğini unutmayın.",
     "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Yeni bir klasör eklendiğinde, Klasör ID'nin klasörleri aygıtlar arasında bağlantılandırmak için kullanıldığını unutmayın. Klasör ID'ler büyük - küçük harf duyarlıdır ve tüm aygıtlarda tamı tamına eşleşmelidir.",
     "Yes": "Evet",
+    "You can also select one of these nearby devices:": "You can also select one of these nearby devices:",
     "You can change your choice at any time in the Settings dialog.": "Seçiminizi herhangi bir zamanda Ayarlar penceresinde değiştirebilirsiniz.",
     "You can read more about the two release channels at the link below.": "İki dağıtım kanalıyla ilgili daha çoğunu aşağıdaki bağlantıdan okuyabilirsiniz.",
     "You must keep at least one version.": "En az bir sürümü tutmalısınız.",

gui/default/assets/lang/lang-uk.json

@@ -65,11 +65,11 @@
     "Edit Device": "Налаштування пристрою",
     "Edit Folder": "Налаштування директорії",
     "Editing": "Редагування",
-    "Editing {%path%}.": "Editing {{path}}.",
+    "Editing {%path%}.": "Редагування {{path}}.",
     "Enable NAT traversal": "Увімкнути NAT traversal",
     "Enable Relaying": "Увімкнути ретрансляцію (relaying)",
-    "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.",
-    "Enter a non-privileged port number (1024 - 65535).": "Enter a non-privileged port number (1024 - 65535).",
+    "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Введіть невід'ємне число (напр. \"2.35\") та виберіть пристрій. Проценти від загального дискового простору.",
+    "Enter a non-privileged port number (1024 - 65535).": "Введіть номер непривілейованого порту (1024 - 65535).",
     "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Введіть розділені комою (\"tcp://ip:port\", \"tcp://host:port\") адреси або \"dynamic\" для автоматичного визначення адреси.",
     "Enter ignore patterns, one per line.": "Введіть шаблони ігнорування, по одному на рядок.",
     "Error": "Помилка",
@@ -93,7 +93,7 @@
     "GUI": "Графічний інтерфейс",
     "GUI Authentication Password": "Пароль для доступу до панелі управління",
     "GUI Authentication User": "Логін користувача для доступу до панелі управління",
-    "GUI Listen Address": "GUI Listen Address",
+    "GUI Listen Address": "Адреса прослуховування GUI",
     "GUI Listen Addresses": "Адреса доступу до панелі управління",
     "GUI Theme": "Тема інтерфейсу",
     "Generate": "Згенерувати",
@@ -158,6 +158,8 @@
     "Please consult the release notes before performing a major upgrade.": "Будь ласка перегляньте примітки до випуску перед мажорним оновленням. ",
     "Please set a GUI Authentication User and Password in the Settings dialog.": "Будь ласка, встановіть у налаштуваннях ім'я користувача та пароль до графічного інтерфейсу.",
     "Please wait": "Будь ласка, зачекайте",
+    "Prefix indicating that the file can be deleted if preventing directory removal": "Префікс означає, що файл може бути видалений при запобіганні видаленню директорії",
+    "Prefix indicating that the pattern should be matched without case sensitivity": "Префікс означає, що шаблон має збігатися без чутливості до регістру",
     "Preview": "Попередній перегляд",
     "Preview Usage Report": "Попередній перегляд статистичного звіту",
     "Quick guide to supported patterns": "Швидкий посібник по шаблонам, що підтримуються",
@@ -271,6 +273,7 @@
     "When adding a new device, keep in mind that this device must be added on the other side too.": "Коли додаєте новий вузол, пам’ятайте, що цей вузол повинен бути доданий і на іншій стороні.",
     "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Коли додаєте нову директорію, пам’ятайте, що ID цієї директорії використовується для того, щоб зв’язувати директорії разом між пристроями. Назви повинні точно співпадати між усіма пристроями, регістр символів має значення.",
     "Yes": "Так",
+    "You can also select one of these nearby devices:": "You can also select one of these nearby devices:",
     "You can change your choice at any time in the Settings dialog.": "Ви завжди можете змінити свій вибір у Налаштуваннях.",
     "You can read more about the two release channels at the link below.": "Ви можете прочитати більше про два канали випусків за посиланням нижче.",
     "You must keep at least one version.": "Ви повинні зберігати щонайменше одну версію.",

gui/default/assets/lang/lang-vi.json

@@ -158,6 +158,8 @@
     "Please consult the release notes before performing a major upgrade.": "Hãy xem kỹ lịch sử phát hành trước khi tiến hành bản cập nhật q.trọng.",
     "Please set a GUI Authentication User and Password in the Settings dialog.": "Hãy thiết lập tên ng.dùng và mật khẩu xác minh GUI trong hộp thoại Cài đặt.",
     "Please wait": "Xin chờ",
+    "Prefix indicating that the file can be deleted if preventing directory removal": "Prefix indicating that the file can be deleted if preventing directory removal",
+    "Prefix indicating that the pattern should be matched without case sensitivity": "Prefix indicating that the pattern should be matched without case sensitivity",
     "Preview": "Xem trước",
     "Preview Usage Report": "Xem trước báo cáo s.dụng",
     "Quick guide to supported patterns": "H.dẫn sơ lược về các q.luật được hỗ trợ",
@@ -271,6 +273,7 @@
     "When adding a new device, keep in mind that this device must be added on the other side too.": "Khi thêm một thiết bị mới, hãy nhớ rằng thiết bị này cũng phải được thêm vào máy kia.",
     "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Khi thêm một thư mục mới, hãy nhớ rằng ID thư mục được dùng để gắn kết thư mục giữa các thiết bị với nhau. Chúng phải chính xác từng chữ, cả viết hoa và thường giữa tất cả thiết bị.",
     "Yes": "Phải",
+    "You can also select one of these nearby devices:": "You can also select one of these nearby devices:",
     "You can change your choice at any time in the Settings dialog.": "You can change your choice at any time in the Settings dialog.",
     "You can read more about the two release channels at the link below.": "You can read more about the two release channels at the link below.",
     "You must keep at least one version.": "Bạn phải giữ ít nhất một phiên bản.",

gui/default/assets/lang/lang-zh-CN.json

@@ -31,7 +31,7 @@
     "Bugs": "问题回报",
     "CPU Utilization": "CPU使用率",
     "Changelog": "更新日志",
-    "Clean out after": "在该时间后清除：",
+    "Clean out after": "在该时间后清除",
     "Click to see discovery failures": "点击查看发现错误",
     "Close": "关闭",
     "Command": "命令",
@@ -111,7 +111,7 @@
     "Introduced By": "介绍自",
     "Introducer": "介绍人设备",
     "Inversion of the given condition (i.e. do not exclude)": "对本条件取反（例如：不要排除某项）",
-    "Keep Versions": "保留历史版本数量",
+    "Keep Versions": "保留版本数量",
     "Largest First": "大文件优先",
     "Last File Received": "最后接收的文件",
     "Last Scan": "最后扫描",
@@ -125,7 +125,7 @@
     "Local State (Total)": "本地状态汇总",
     "Major Upgrade": "重大更新",
     "Master": "自主",
-    "Maximum Age": "历史版本最长保留时间",
+    "Maximum Age": "最长保留时间",
     "Metadata Only": "仅元数据",
     "Minimum Free Disk Space": "最低可用磁盘空间",
     "Move to top of queue": "移动到队列顶端",
@@ -158,6 +158,8 @@
     "Please consult the release notes before performing a major upgrade.": "请在进行重大更新前查看发布说明。",
     "Please set a GUI Authentication User and Password in the Settings dialog.": "请在设置对话框中设置 GUI 验证用户及其密码。",
     "Please wait": "请稍候",
+    "Prefix indicating that the file can be deleted if preventing directory removal": "表示如果删除了阻止目录则文件可被删除的前缀",
+    "Prefix indicating that the pattern should be matched without case sensitivity": "表示该模式匹配忽略了大小写差异的前缀",
     "Preview": "预览",
     "Preview Usage Report": "预览使用报告",
     "Quick guide to supported patterns": "支持的通配符的简单教程：",
@@ -271,6 +273,7 @@
     "When adding a new device, keep in mind that this device must be added on the other side too.": "若您在本机添加新设备，记住您也必须在这个设备上添加本机。",
     "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "若你添加了新文件夹，记住文件夹 ID 是用以在不同设备间建立联系的。在不同设备间拥有相同 ID 的文件夹将会被同步。且文件夹 ID 区分大小写。",
     "Yes": "是",
+    "You can also select one of these nearby devices:": "您也可以从这些附近的设备中选择：",
     "You can change your choice at any time in the Settings dialog.": "您可以在任何时候在设置对话框中更改选择。",
     "You can read more about the two release channels at the link below.": "您可以从以下链接读取更多关于两个发行渠道的信息。",
     "You must keep at least one version.": "您必须保留至少一个版本。",

gui/default/index.html

@@ -9,32 +9,32 @@
 -->
 <html lang="en" ng-app="syncthing" ng-controller="SyncthingController" class="ng-cloak">
 <head>
-  <meta charset="utf-8">
-  <meta http-equiv="X-UA-Compatible" content="IE=edge">
-  <meta name="viewport" content="width=device-width, initial-scale=1.0">
-  <meta name="description" content="">
-  <meta name="author" content="">
-  <link rel="shortcut icon" href="assets/img/favicon-{{syncthingStatus()}}.png">
-  <link rel="mask-icon" href="assets/img/safari-pinned-tab.svg" color="#0882c8">
+  <meta charset="utf-8"/>
+  <meta http-equiv="X-UA-Compatible" content="IE=edge"/>
+  <meta name="viewport" content="width=device-width, initial-scale=1.0"/>
+  <meta name="description" content=""/>
+  <meta name="author" content=""/>
+  <link rel="shortcut icon" href="assets/img/favicon-{{syncthingStatus()}}.png"/>
+  <link rel="mask-icon" href="assets/img/safari-pinned-tab.svg" color="#0882c8"/>
 
   <title ng-bind="thisDeviceName() + ' | Syncthing'"></title>
-  <link href="vendor/bootstrap/css/bootstrap.css" rel="stylesheet">
-  <link href="assets/font/raleway.css" rel="stylesheet">
-  <link href="vendor/font-awesome/css/font-awesome.css" rel="stylesheet">
-  <link href="assets/css/overrides.css" rel="stylesheet">
-  <link href="assets/css/theme.css" rel="stylesheet">
+  <link href="vendor/bootstrap/css/bootstrap.css" rel="stylesheet"/>
+  <link href="assets/font/raleway.css" rel="stylesheet"/>
+  <link href="vendor/font-awesome/css/font-awesome.css" rel="stylesheet"/>
+  <link href="assets/css/overrides.css" rel="stylesheet"/>
+  <link href="assets/css/theme.css" rel="stylesheet"/>
 </head>
 
 <body>
-  <script src="syncthing/development/logbar.js"></script>
+  <script type="text/javascript" src="syncthing/development/logbar.js"></script>
   <div ng-if="version.isDevelopmentVersion" ng-include="'syncthing/development/logbar.html'"></div>
   <!-- Top bar -->
 
   <nav class="navbar navbar-top navbar-default" role="navigation">
     <div class="container">
       <span class="navbar-brand" aria-hidden="true">
-        <img class="logo hidden-xs" src="assets/img/logo-horizontal.svg" height="32" width="117"/>
-        <img class="logo hidden visible-xs" src="assets/img/favicon-default.png" height="32"/>
+        <img class="logo hidden-xs" src="assets/img/logo-horizontal.svg" height="32" width="117" alt=""/>
+        <img class="logo hidden visible-xs" src="assets/img/favicon-default.png" height="32" alt=""/>
       </span>
       <p class="navbar-text hidden-xs" ng-class="{'hidden-sm':upgradeInfo && upgradeInfo.newer}">{{thisDeviceName()}}</p>
       <ul class="nav navbar-nav navbar-right">
@@ -394,7 +394,7 @@
                     </tr>
                     <tr>
                       <th><span class="fa fa-fw fa-share-alt"></span>&nbsp;<span translate>Shared With</span></th>
-                      <td class="text-right">{{sharesFolder(folder)}}</td>
+                      <td class="text-right" title="{{sharesFolder(folder)}}">{{sharesFolder(folder)}}</td>
                     </tr>
                     <tr>
                       <th><span class="fa fa-fw fa-clock-o"></span>&nbsp;<span translate>Last Scan</span></th>
@@ -496,7 +496,12 @@
                   </tr>
                   <tr>
                     <th><span class="fa fa-fw fa-home"></span>&nbsp;<span translate>Local State (Total)</span></th>
-                    <td class="text-right">{{localStateTotal.files | alwaysNumber}} <span translate>items</span>, ~{{localStateTotal.bytes | binary}}B</td>
+                    <td class="text-right">
+                        <span tooltip data-original-title="{{localStateTotal.files | alwaysNumber}} {{'files' | translate}}, {{ localStateTotal.directories | alwaysNumber}} {{'directories' | translate}}, ~{{ localStateTotal.bytes | binary}}B">
+                        <span class="fa fa-files-o"></span>&nbsp;{{localStateTotal.files | alwaysNumber}}&ensp;
+                        <span class="fa fa-folder-o"></span>&nbsp;{{localStateTotal.directories| alwaysNumber}}&ensp;
+                        <span class="fa fa-hdd-o"></span>&nbsp;~{{localStateTotal.bytes | binary}}B
+                    </td>
                   </tr>
                   <tr>
                     <th><span class="fa fa-fw fa-th"></span>&nbsp;<span translate>RAM Utilization</span></th>
@@ -559,7 +564,7 @@
                 <span ng-switch="deviceStatus(deviceCfg)" class="pull-right text-{{deviceClass(deviceCfg)}}">
                   <span ng-switch-when="insync"><span class="hidden-xs" translate>Up to Date</span><span class="visible-xs">&#9724;</span></span>
                   <span ng-switch-when="syncing">
-                    <span class="hidden-xs" translate>Syncing</span> ({{completion[deviceCfg.deviceID]._total | number:0}}%)
+                    <span class="hidden-xs" translate>Syncing</span> ({{completion[deviceCfg.deviceID]._total | number:0}}%, {{completion[deviceCfg.deviceID]._needBytes | binary}}B)
                   </span>
                   <span ng-switch-when="paused"><span class="hidden-xs" translate>Paused</span><span class="visible-xs">&#9724;</span></span>
                   <span ng-switch-when="disconnected"><span class="hidden-xs" translate>Disconnected</span><span class="visible-xs">&#9724;</span></span>
@@ -640,7 +645,7 @@
                     </tr>
                     <tr ng-if="deviceFolders(deviceCfg).length > 0">
                       <th><span class="fa fa-fw fa-folder"></span>&nbsp;<span translate>Folders</span></th>
-                      <td class="text-right">{{deviceFolders(deviceCfg).map(folderLabel).join(", ")}}</td>
+                      <td class="text-right" title="{{deviceFolders(deviceCfg).map(folderLabel).join(", ")}}">{{deviceFolders(deviceCfg).map(folderLabel).join(", ")}}</td>
                     </tr>
                   </tbody>
                 </table>
@@ -716,41 +721,41 @@
   <ng-include src="'syncthing/core/discoveryFailuresModalView.html'"></ng-include>
 
   <!-- vendor scripts -->
-  <script src="vendor/jquery/jquery-2.2.2.js"></script>
-  <script src="vendor/angular/angular.js"></script>
-  <script src="vendor/angular/angular-sanitize.js"></script>
-  <script src="vendor/angular/angular-translate.js"></script>
-  <script src="vendor/angular/angular-translate-loader-static-files.js"></script>
-  <script src="vendor/angular/angular-dirPagination.js"></script>
-  <script src="vendor/bootstrap/js/bootstrap.js"></script>
+  <script type="text/javascript" src="vendor/jquery/jquery-2.2.2.js"></script>
+  <script type="text/javascript" src="vendor/angular/angular.js"></script>
+  <script type="text/javascript" src="vendor/angular/angular-sanitize.js"></script>
+  <script type="text/javascript" src="vendor/angular/angular-translate.js"></script>
+  <script type="text/javascript" src="vendor/angular/angular-translate-loader-static-files.js"></script>
+  <script type="text/javascript" src="vendor/angular/angular-dirPagination.js"></script>
+  <script type="text/javascript" src="vendor/bootstrap/js/bootstrap.js"></script>
   <!-- / vendor scripts -->
 
   <!-- gui application code -->
-  <script src="syncthing/core/module.js"></script>
-  <script src="syncthing/core/alwaysNumberFilter.js"></script>
-  <script src="syncthing/core/basenameFilter.js"></script>
-  <script src="syncthing/core/binaryFilter.js"></script>
-  <script src="syncthing/core/durationFilter.js"></script>
-  <script src="syncthing/core/eventService.js"></script>
-  <script src="syncthing/core/identiconDirective.js"></script>
-  <script src="syncthing/core/languageSelectDirective.js"></script>
-  <script src="syncthing/core/lastErrorComponentFilter.js"></script>
-  <script src="syncthing/core/localeService.js"></script>
-  <script src="syncthing/core/modalDirective.js"></script>
-  <script src="syncthing/core/naturalFilter.js"></script>
-  <script src="syncthing/core/metricFilter.js"></script>
-  <script src="syncthing/core/notificationDirective.js"></script>
-  <script src="syncthing/core/pathIsSubDirDirective.js"></script>
-  <script src="syncthing/core/popoverDirective.js"></script>
-  <script src="syncthing/core/selectOnClickDirective.js"></script>
-  <script src="syncthing/core/syncthingController.js"></script>
-  <script src="syncthing/core/tooltipDirective.js"></script>
-  <script src="syncthing/core/uniqueFolderDirective.js"></script>
-  <script src="syncthing/core/validDeviceidDirective.js"></script>
-  <script src="assets/lang/valid-langs.js"></script>
-  <script src="assets/lang/prettyprint.js"></script>
-  <script src="meta.js"></script>
-  <script src="syncthing/app.js"></script>
+  <script type="text/javascript" src="syncthing/core/module.js"></script>
+  <script type="text/javascript" src="syncthing/core/alwaysNumberFilter.js"></script>
+  <script type="text/javascript" src="syncthing/core/basenameFilter.js"></script>
+  <script type="text/javascript" src="syncthing/core/binaryFilter.js"></script>
+  <script type="text/javascript" src="syncthing/core/durationFilter.js"></script>
+  <script type="text/javascript" src="syncthing/core/eventService.js"></script>
+  <script type="text/javascript" src="syncthing/core/identiconDirective.js"></script>
+  <script type="text/javascript" src="syncthing/core/languageSelectDirective.js"></script>
+  <script type="text/javascript" src="syncthing/core/lastErrorComponentFilter.js"></script>
+  <script type="text/javascript" src="syncthing/core/localeService.js"></script>
+  <script type="text/javascript" src="syncthing/core/modalDirective.js"></script>
+  <script type="text/javascript" src="syncthing/core/naturalFilter.js"></script>
+  <script type="text/javascript" src="syncthing/core/metricFilter.js"></script>
+  <script type="text/javascript" src="syncthing/core/notificationDirective.js"></script>
+  <script type="text/javascript" src="syncthing/core/pathIsSubDirDirective.js"></script>
+  <script type="text/javascript" src="syncthing/core/popoverDirective.js"></script>
+  <script type="text/javascript" src="syncthing/core/selectOnClickDirective.js"></script>
+  <script type="text/javascript" src="syncthing/core/syncthingController.js"></script>
+  <script type="text/javascript" src="syncthing/core/tooltipDirective.js"></script>
+  <script type="text/javascript" src="syncthing/core/uniqueFolderDirective.js"></script>
+  <script type="text/javascript" src="syncthing/core/validDeviceidDirective.js"></script>
+  <script type="text/javascript" src="assets/lang/valid-langs.js"></script>
+  <script type="text/javascript" src="assets/lang/prettyprint.js"></script>
+  <script type="text/javascript" src="meta.js"></script>
+  <script type="text/javascript" src="syncthing/app.js"></script>
   <!-- / gui application code -->
 
 </body>

gui/default/syncthing/core/aboutModalView.html

@@ -12,7 +12,7 @@
     <p translate>Copyright &copy; 2014-2017 the following Contributors:</p>
     <div class="row">
       <div class="col-md-12" id="contributor-list">
-Jakob Borg, Audrius Butkevicius, Alexander Graf, Anderson Mesquita, Antony Male, Ben Schulz, Caleb Callaway, Daniel Harte, Lars K.W. Gohlke, Lode Hoste, Michael Ploujnikov, Philippe Schommers, Ryan Sullivan, Sergey Mishin, Simon Frei, Stefan Tatschner, Aaron Bieber, Adam Piggott, Adel Qalieh, Alessandro G., Alexandre Viau, Andrew Dunham, Andrey D, Antoine Lamielle, Arthur Axel fREW Schmidt, Bart De Vries, Ben Curthoys, Ben Shepherd, Ben Sidhom, Benny Ng, Brandon Philips, Brendan Long, Brian R. Becker, Carsten Hagemann, Cathryne Linenweaver, Cedric Staniewski, Chris Howie, Chris Joel, Colin Kennedy, Daniel Bergmann, Daniel Martí, Darshil Chanpura, David Rimmer, Denis A., Dennis Wilson, Dominik Heidler, Elias Jarlebring, Emil Hessman, Erik Meitner, Federico Castagnini, Felix Ableitner, Felix Unterpaintner, Francois-Xavier Gsell, Frank Isemann, Gilli Sigurdsson, Heiko Zuerker, Jaakko Hannikainen, Jacek Szafarkiewicz, Jake Peterson, James Patterson, Jaroslav Malec, Jaya Chithra, Jens Diemer, Jochen Voss, Johan Vromans, Karol Różycki, Kelong Cong, Ken'ichi Kamada, Kevin Allen, Kevin White, Jr., Kurt Fitzner, Laurent Etiemble, Leo Arias, Lord Landon Agahnim, Majed Abdulaziz, Marc Laporte, Marc Pujol, Marcin Dziadus, Mark Pulford, Mateusz Naściszewski, Matt Burke, Max Schulze, Michael Jephcote, Michael Tilli, Nate Morrison, Niels Peter Roest, Pascal Jungblut, Peter Hoeg, Phill Luby, Piotr Bejda, Robert Carosi, Roman Zaynetdinov, Sacheendra Talluri, Scott Klupfel, Stefan Kuntz, Tim Abell, Tim Howes, Tobias Nygren, Tomas Cerveny, Tully Robinson, Tyler Brazier, Unrud, Veeti Paananen, Victor Buinsky, Vil Brekin, William A. Kennington III, Wulf Weich, Xavier O., Yannic A.
+Jakob Borg, Audrius Butkevicius, Alexander Graf, Anderson Mesquita, Antony Male, Ben Schulz, Caleb Callaway, Daniel Harte, Lars K.W. Gohlke, Lode Hoste, Michael Ploujnikov, Nate Morrison, Philippe Schommers, Ryan Sullivan, Sergey Mishin, Simon Frei, Stefan Tatschner, Aaron Bieber, Adam Piggott, Adel Qalieh, Alessandro G., Alexandre Viau, Andrew Dunham, Andrey D, Antoine Lamielle, Arthur Axel fREW Schmidt, Bart De Vries, Ben Curthoys, Ben Shepherd, Ben Sidhom, Benny Ng, Brandon Philips, Brendan Long, Brian R. Becker, Carsten Hagemann, Cathryne Linenweaver, Cedric Staniewski, Chris Howie, Chris Joel, Colin Kennedy, Daniel Bergmann, Daniel Martí, Darshil Chanpura, David Rimmer, Denis A., Dennis Wilson, Dominik Heidler, Elias Jarlebring, Emil Hessman, Erik Meitner, Federico Castagnini, Felix Ableitner, Felix Unterpaintner, Francois-Xavier Gsell, Frank Isemann, Gilli Sigurdsson, Heiko Zuerker, Jaakko Hannikainen, Jacek Szafarkiewicz, Jake Peterson, James Patterson, Jaroslav Malec, Jaya Chithra, Jens Diemer, Jochen Voss, Johan Vromans, Jose Manuel Delicado, Karol Różycki, Kelong Cong, Ken'ichi Kamada, Kevin Allen, Kevin White, Jr., Kurt Fitzner, Laurent Etiemble, Leo Arias, Liu Siyuan, Lord Landon Agahnim, Majed Abdulaziz, Marc Laporte, Marc Pujol, Marcin Dziadus, Mark Pulford, Mateusz Naściszewski, Matt Burke, Max Schulze, Michael Jephcote, Michael Tilli, Niels Peter Roest, Pascal Jungblut, Peter Hoeg, Phill Luby, Piotr Bejda, Robert Carosi, Roman Zaynetdinov, Ross Smith II, Sacheendra Talluri, Scott Klupfel, Stefan Kuntz, Suhas Gundimeda, Tim Abell, Tim Howes, Tobias Nygren, Tomas Cerveny, Tully Robinson, Tyler Brazier, Unrud, Veeti Paananen, Victor Buinsky, Vil Brekin, William A. Kennington III, Wulf Weich, Xavier O., Yannic A.
     </div>
     </div>
     <hr/>

gui/default/syncthing/core/syncthingController.js

@@ -74,11 +74,13 @@ angular.module('syncthing.core')
             staggeredCleanInterval: 3600,
             staggeredVersionsPath: "",
             externalCommand: "",
-            autoNormalize: true
+            autoNormalize: true,
+            path: ""
         };
 
         $scope.localStateTotal = {
             bytes: 0,
+            directories: 0,
             files: 0
         };
 
@@ -231,7 +233,8 @@ angular.module('syncthing.core')
                     address: arg.data.addr
                 };
                 $scope.completion[arg.data.id] = {
-                    _total: 100
+                    _total: 100,
+                    _needBytes: 0
                 };
             }
         });
@@ -377,7 +380,8 @@ angular.module('syncthing.core')
             $scope.devices = $scope.config.devices;
             $scope.devices.forEach(function (deviceCfg) {
                 $scope.completion[deviceCfg.deviceID] = {
-                    _total: 100
+                    _total: 100,
+                    _needBytes: 0
                 };
             });
             $scope.devices.sort(deviceCompare);
@@ -448,19 +452,21 @@ angular.module('syncthing.core')
         function recalcLocalStateTotal () {
             $scope.localStateTotal = {
                 bytes: 0,
+                directories: 0,
                 files: 0
             };
 
             for (var f in $scope.model) {
                $scope.localStateTotal.bytes += $scope.model[f].localBytes;
                $scope.localStateTotal.files += $scope.model[f].localFiles;
+               $scope.localStateTotal.directories += $scope.model[f].localDirectories;
             }
         }
 
         function recalcCompletion(device) {
             var total = 0, needed = 0, deletes = 0;
             for (var folder in $scope.completion[device]) {
-                if (folder === "_total") {
+                if (folder === "_total" || folder === '_needBytes') {
                     continue;
                 }
                 total += $scope.completion[device][folder].globalBytes;
@@ -469,8 +475,10 @@ angular.module('syncthing.core')
             }
             if (total == 0) {
                 $scope.completion[device]._total = 100;
+                $scope.completion[device]._needBytes = 0;
             } else {
                 $scope.completion[device]._total = 100 * (1 - needed / total);
+                $scope.completion[device]._needBytes = needed
             }
 
             if (needed == 0 && deletes > 0) {
@@ -478,6 +486,7 @@ angular.module('syncthing.core')
                 // to do. Drop down the completion percentage to indicate
                 // that we have stuff to do.
                 $scope.completion[device]._total = 95;
+                $scope.completion[device]._needBytes = 0;
             }
 
             console.log("recalcCompletion", device, $scope.completion[device]);
@@ -598,6 +607,25 @@ angular.module('syncthing.core')
             $scope.neededTotal = data.total;
         }
 
+        function pathJoin(base, name) {
+            base = expandTilde(base);
+            if (base[base.length - 1] !== $scope.system.pathSeparator) {
+                return base + $scope.system.pathSeparator + name;
+            }
+            return base + name;
+        }
+
+        function expandTilde(path) {
+            if (path && path.trim().charAt(0) === '~') {
+                return $scope.system.tilde + path.trim().substring(1);
+            }
+            return path;
+        }
+
+        function shouldSetDefaultFolderPath() {
+            return $scope.config.options && $scope.config.options.defaultFolderPath && !$scope.editingExisting && $scope.folderEditor.folderPath.$pristine
+        }
+
         $scope.neededPageChanged = function (page) {
             $scope.neededCurrentPage = page;
             refreshNeed($scope.neededFolder);
@@ -1182,7 +1210,19 @@ angular.module('syncthing.core')
         $scope.addDevice = function (deviceID, name) {
             return $http.get(urlbase + '/system/discovery')
                 .success(function (registry) {
-                    $scope.discovery = registry;
+                    $scope.discovery = [];
+                    outer:
+                    for (var id in registry) {
+                        if ($scope.discovery.length === 5) {
+                            break;
+                        }
+                        for (var i = 0; i < $scope.devices.length; i++) {
+                            if ($scope.devices[i].deviceID === id) {
+                                continue outer;
+                            }
+                        }
+                        $scope.discovery.push(id);
+                    }
                 })
                 .then(function () {
                     $scope.currentDevice = {
@@ -1340,9 +1380,10 @@ angular.module('syncthing.core')
         $scope.directoryList = [];
 
         $scope.$watch('currentFolder.path', function (newvalue) {
-            if (newvalue && newvalue.trim().charAt(0) === '~') {
-                $scope.currentFolder.path = $scope.system.tilde + newvalue.trim().substring(1);
+            if (!newvalue) {
+                return;
             }
+            $scope.currentFolder.path = expandTilde(newvalue);
             $http.get(urlbase + '/system/browse', {
                 params: { current: newvalue }
             }).success(function (data) {
@@ -1350,6 +1391,20 @@ angular.module('syncthing.core')
             }).error($scope.emitHTTPError);
         });
 
+        $scope.$watch('currentFolder.label', function (newvalue) {
+            if (!newvalue || !shouldSetDefaultFolderPath()) {
+                return;
+            }
+            $scope.currentFolder.path = pathJoin($scope.config.options.defaultFolderPath, newvalue);
+        });
+
+        $scope.$watch('currentFolder.id', function (newvalue) {
+            if (!newvalue || !shouldSetDefaultFolderPath() || $scope.currentFolder.label) {
+                return;
+            }
+            $scope.currentFolder.path = pathJoin($scope.config.options.defaultFolderPath, newvalue);
+        });
+
         $scope.loadFormIntoScope = function (form) {
             console.log('loadFormIntoScope',form.$name);
             switch (form.$name) {
@@ -1366,7 +1421,15 @@ angular.module('syncthing.core')
             $('#globalChanges').modal();
         };
 
+        $scope.editFolderModal = function () {
+            $scope.folderPathErrors = {};
+            $scope.folderEditor.$setPristine();
+            $('#editIgnores textarea').val("");
+            $('#editFolder').modal();
+        };
+
         $scope.editFolder = function (folderCfg) {
+            $scope.editingExisting = true;
             $scope.currentFolder = angular.copy(folderCfg);
             if ($scope.currentFolder.path.slice(-1) === $scope.system.pathSeparator) {
                 $scope.currentFolder.path = $scope.currentFolder.path.slice(0, -1);
@@ -1409,26 +1472,21 @@ angular.module('syncthing.core')
             }
             $scope.currentFolder.externalCommand = $scope.currentFolder.externalCommand || "";
 
-            $scope.editingExisting = true;
-            $scope.folderPathErrors = {};
-            $scope.folderEditor.$setPristine();
-            $('#editFolder').modal();
+            $scope.editFolderModal();
         };
 
         $scope.addFolder = function () {
-            $scope.currentFolder = angular.copy($scope.folderDefaults);
-            $scope.editingExisting = false;
-            $('#editIgnores textarea').val("");
-            $scope.folderPathErrors = {};
-            $scope.folderEditor.$setPristine();
             $http.get(urlbase + '/svc/random/string?length=10').success(function (data) {
+                $scope.editingExisting = false;
+                $scope.currentFolder = angular.copy($scope.folderDefaults);
                 $scope.currentFolder.id = (data.random.substr(0, 5) + '-' + data.random.substr(5, 5)).toLowerCase();
-                $('#editFolder').modal();
+                $scope.editFolderModal();
             });
         };
 
         $scope.addFolderAndShare = function (folder, folderLabel, device) {
             $scope.dismissFolderRejection(folder, device);
+            $scope.editingExisting = false;
             $scope.currentFolder = angular.copy($scope.folderDefaults);
             $scope.currentFolder.id = folder;
             $scope.currentFolder.label = folderLabel;
@@ -1437,10 +1495,7 @@ angular.module('syncthing.core')
             };
             $scope.currentFolder.selectedDevices[device] = true;
 
-            $scope.editingExisting = false;
-            $scope.folderPathErrors = {};
-            $scope.folderEditor.$setPristine();
-            $('#editFolder').modal();
+            $scope.editFolderModal();
         };
 
         $scope.shareFolderWithDevice = function (folder, device) {

gui/default/syncthing/development/logbar.html

@@ -1,5 +1,5 @@
 <div class="dev-top-bar" id="dev-top-bar" style="display: none">
-    <link href="assets/css/dev.css" rel="stylesheet">
+    <link href="assets/css/dev.css" rel="stylesheet"/>
     <div class="row">
         <div class="col-xs-4"><b>DEV</b></div>
         <div id="log" class="col-xs-8">

gui/default/syncthing/device/editDeviceModalView.html

@@ -3,22 +3,30 @@
     <form role="form" name="deviceEditor">
       <div class="form-group" ng-class="{'has-error': deviceEditor.deviceID.$invalid && deviceEditor.deviceID.$dirty}" ng-init="loadFormIntoScope(deviceEditor)">
         <label translate for="deviceID">Device ID</label>
-        <input ng-if="!editingExisting" name="deviceID" id="deviceID" class="form-control text-monospace" type="text" ng-model="currentDevice.deviceID" required valid-deviceid list="discovery-list" />
-        <datalist id="discovery-list" ng-if="!editingExisting">
-          <option ng-repeat="(id, data) in discovery" value="{{id}}" />
-        </datalist>
+        <div ng-if="!editingExisting">
+          <input name="deviceID" id="deviceID" class="form-control text-monospace" type="text" ng-model="currentDevice.deviceID" required="" valid-deviceid list="discovery-list" aria-required="true"/>
+          <datalist id="discovery-list">
+            <option ng-repeat="id in discovery" value="{{id}}" />
+          </datalist>
+          <p class="help-block" ng-if="discovery">
+            <span translate>You can also select one of these nearby devices:</span>
+            <ul>
+              <li ng-repeat="id in discovery"><a ng-click="currentDevice.deviceID = id">{{id}}</a></li>
+            </ul>
+          </p>
+          <p class="help-block">
+            <span translate ng-if="deviceEditor.deviceID.$valid || deviceEditor.deviceID.$pristine">The device ID to enter here can be found in the "Actions > Show ID" dialog on the other device. Spaces and dashes are optional (ignored).</span>
+            <span translate ng-show="deviceEditor.deviceID.$valid || deviceEditor.deviceID.$pristine">When adding a new device, keep in mind that this device must be added on the other side too.</span>
+            <span translate ng-if="deviceEditor.deviceID.$error.required && deviceEditor.deviceID.$dirty">The device ID cannot be blank.</span>
+            <span translate ng-if="deviceEditor.deviceID.$error.validDeviceid && deviceEditor.deviceID.$dirty">The entered device ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.</span>
+            <span translate ng-if="deviceEditor.deviceID.$error.unique && deviceEditor.deviceID.$dirty">A device with that ID is already added.</span>
+          </p>
+        </div>
         <div ng-if="editingExisting" class="well well-sm text-monospace" select-on-click>{{currentDevice.deviceID}}</div>
-        <p class="help-block">
-          <span translate ng-if="deviceEditor.deviceID.$valid || deviceEditor.deviceID.$pristine">The device ID to enter here can be found in the "Actions > Show ID" dialog on the other device. Spaces and dashes are optional (ignored).</span>
-          <span translate ng-show="!editingExisting && (deviceEditor.deviceID.$valid || deviceEditor.deviceID.$pristine)">When adding a new device, keep in mind that this device must be added on the other side too.</span>
-          <span translate ng-if="deviceEditor.deviceID.$error.required && deviceEditor.deviceID.$dirty">The device ID cannot be blank.</span>
-          <span translate ng-if="deviceEditor.deviceID.$error.validDeviceid && deviceEditor.deviceID.$dirty">The entered device ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.</span>
-          <span translate ng-if="deviceEditor.deviceID.$error.unique && deviceEditor.deviceID.$dirty">A device with that ID is already added.</span>
-        </p>
       </div>
       <div class="form-group">
         <label translate for="name">Device Name</label>
-        <input id="name" class="form-control" type="text" ng-model="currentDevice.name"></input>
+        <input id="name" class="form-control" type="text" ng-model="currentDevice.name" />
         <p translate ng-if="currentDevice.deviceID == myID" class="help-block">Shown instead of Device ID in the cluster status. Will be advertised to other devices as an optional default name.</p>
         <p translate ng-if="currentDevice.deviceID != myID" class="help-block">Shown instead of Device ID in the cluster status. Will be updated to the name the device advertises if left empty.</p>
       </div>

gui/default/syncthing/device/globalChangesModalView.html

@@ -2,21 +2,25 @@
 <modal id="globalChanges" status="default" icon="{{'history'}}" heading="{{'Global Changes' | translate}}" large="yes" closeable="yes">
     <div class="modal-body">
         <table>
-          <tr>
-            <th translate>Device</th>
-            <th translate>Action</th>
-            <th translate>Type</th>
-            <th translate>Path</th>
-            <th translate>Time</th>
-          </tr>
-          <tr ng-repeat="changeEvent in globalChangeEvents">
-            <td ng-if="changeEvent.data.modifiedBy">{{friendlyNameFromShort(changeEvent.data.modifiedBy)}}</td>
-            <td ng-if="!changeEvent.data.modifiedBy"><span translate>Unknown</span></td>
-            <td>{{changeEvent.data.action}}</td>
-            <td>{{changeEvent.data.type}}</td>
-            <td class="globalChanges-path-col">{{changeEvent.data.path}}</td>
-            <td class="globalChanges-time-col">{{changeEvent.time | date:"yyyy-MM-dd HH:mm:ss"}}</td>
-          </tr>
+          <thead>          
+            <tr>
+              <th translate>Device</th>
+              <th translate>Action</th>
+              <th translate>Type</th>
+              <th translate>Path</th>
+              <th translate>Time</th>
+            </tr>
+          </thead>
+          <tbody>          
+            <tr ng-repeat="changeEvent in globalChangeEvents">
+              <td ng-if="changeEvent.data.modifiedBy">{{friendlyNameFromShort(changeEvent.data.modifiedBy)}}</td>
+              <td ng-if="!changeEvent.data.modifiedBy"><span translate>Unknown</span></td>
+              <td>{{changeEvent.data.action}}</td>
+              <td>{{changeEvent.data.type}}</td>
+              <td class="globalChanges-path-col">{{changeEvent.data.path}}</td>
+              <td class="globalChanges-time-col">{{changeEvent.time | date:"yyyy-MM-dd HH:mm:ss"}}</td>
+            </tr>
+          </tbody>        
         </table>
     </div>
     <div class="modal-footer">

gui/default/syncthing/device/idqrModalView.html

@@ -1,7 +1,7 @@
 <modal id="idqr" status="info" icon="qrcode" heading="{{'Device Identification' | translate}} - {{deviceName(currentDevice)}}" large="yes" closeable="yes">
   <div class="modal-body">
     <div class="well well-sm text-monospace text-center" select-on-click>{{currentDevice.deviceID}}</div>
-    <img ng-if="currentDevice.deviceID" class="center-block img-thumbnail" ng-src="qr/?text={{currentDevice.deviceID}}"/>
+    <img ng-if="currentDevice.deviceID" class="center-block img-thumbnail" ng-src="qr/?text={{currentDevice.deviceID}}" alt="qr code"/>
   </div>
   <div class="modal-footer">
     <button type="button" class="btn btn-default btn-sm" data-dismiss="modal">

gui/default/syncthing/folder/editFolderModalView.html

@@ -12,7 +12,7 @@
           </div>
           <div class="form-group" ng-class="{'has-error': folderEditor.folderID.$invalid && folderEditor.folderID.$dirty}">
             <label for="folderID"><span translate>Folder ID</span></label>
-            <input name="folderID" ng-readonly="editingExisting || (!editingExisting && currentFolder.viewFlags.importFromOtherDevice)" id="folderID" class="form-control" type="text" ng-model="currentFolder.id" required unique-folder value="{{currentFolder.id}}"/>
+            <input name="folderID" ng-readonly="editingExisting || (!editingExisting && currentFolder.viewFlags.importFromOtherDevice)" id="folderID" class="form-control" type="text" ng-model="currentFolder.id" required="" aria-required="true" unique-folder value="{{currentFolder.id}}"/>
             <p class="help-block">
               <span translate ng-if="folderEditor.folderID.$valid || folderEditor.folderID.$pristine">Required identifier for the folder. Must be the same on all cluster devices.</span>
               <span translate ng-if="folderEditor.folderID.$error.uniqueFolder">The folder ID must be unique.</span>
@@ -21,7 +21,7 @@
           </div>
           <div class="form-group" ng-class="{'has-error': folderEditor.folderPath.$invalid && folderEditor.folderPath.$dirty}">
             <label translate for="folderPath">Folder Path</label>
-            <input name="folderPath" ng-readonly="editingExisting" id="folderPath" class="form-control" type="text" ng-model="currentFolder.path" list="directory-list" required path-is-sub-dir/>
+            <input name="folderPath" ng-readonly="editingExisting" id="folderPath" class="form-control" type="text" ng-model="currentFolder.path" list="directory-list" required="" aria-required="true" path-is-sub-dir/>
             <datalist id="directory-list">
               <option ng-repeat="directory in directoryList" value="{{ directory }}" />
             </datalist>
@@ -45,7 +45,7 @@
               <div class="col-md-4" ng-repeat="device in otherDevices()">
                 <div class="checkbox">
                   <label>
-                    <input type="checkbox" ng-model="currentFolder.selectedDevices[device.deviceID]"> {{deviceName(device)}}
+                    <input type="checkbox" ng-model="currentFolder.selectedDevices[device.deviceID]"/> {{deviceName(device)}}
                   </label>
                 </div>
               </div>
@@ -68,7 +68,7 @@
           <div class="col-md-6">
             <div class="form-group" ng-class="{'has-error': folderEditor.rescanIntervalS.$invalid && folderEditor.rescanIntervalS.$dirty}">
               <label for="rescanIntervalS"><span translate>Rescan Interval</span> (s)</label><br/>
-              <input name="rescanIntervalS" id="rescanIntervalS" class="form-control" type="number" ng-model="currentFolder.rescanIntervalS" required min="0">
+              <input name="rescanIntervalS" id="rescanIntervalS" class="form-control" type="number" ng-model="currentFolder.rescanIntervalS" required=""  aria-required="true" min="0"/>
               <p class="help-block">
                 <span translate ng-if="!folderEditor.rescanIntervalS.$valid && folderEditor.rescanIntervalS.$dirty">The rescan interval must be a non-negative number of seconds.</span>
               </p>
@@ -77,7 +77,7 @@
           <div class="col-md-6 form-horizontal">
             <div class="form-group" ng-class="{'has-error': folderEditor.minDiskFree.$invalid && folderEditor.minDiskFree.$dirty}">
               <label class="col-xs-12" for="minDiskFree"><span translate>Minimum Free Disk Space</span></label><br/>
-              <div class="col-xs-9"><input name="minDiskFree" id="minDiskFree" class="form-control" type="number" ng-model="currentFolder.minDiskFree.value" required min="0" step="0.01"></div>
+              <div class="col-xs-9"><input name="minDiskFree" id="minDiskFree" class="form-control" type="number" ng-model="currentFolder.minDiskFree.value" required=""  aria-required="true" min="0" step="0.01"/></div>
               <div class="col-xs-3"><select class="col-sm-3 form-control" ng-model="currentFolder.minDiskFree.unit">
                 <option value="%">%</option>
                 <option value="kB">kB</option>
@@ -106,7 +106,7 @@
             <div class="form-group">
               <div class="checkbox">
                 <label>
-                  <input type="checkbox" ng-model="currentFolder.ignorePerms"> <span translate>Ignore Permissions</span>
+                  <input type="checkbox" ng-model="currentFolder.ignorePerms"/> <span translate>Ignore Permissions</span>
                 </label>
               </div>
               <p translate class="help-block">File permission bits are ignored when looking for changes. Use on FAT file systems.</p>
@@ -140,7 +140,7 @@
               <p translate class="help-block">Files are moved to .stversions directory when replaced or deleted by Syncthing.</p>
               <label translate for="trashcanClean">Clean out after</label>
               <div class="input-group">
-                <input name="trashcanClean" id="trashcanClean" class="form-control text-right" type="number" ng-model="currentFolder.trashcanClean" required min="0">
+                <input name="trashcanClean" id="trashcanClean" class="form-control text-right" type="number" ng-model="currentFolder.trashcanClean" required="" aria-required="true" min="0"/>
                 <div class="input-group-addon" translate>days</div>
               </div>
               <p class="help-block">
@@ -152,7 +152,7 @@
             <div class="form-group" ng-if="currentFolder.fileVersioningSelector=='simple'" ng-class="{'has-error': folderEditor.simpleKeep.$invalid && folderEditor.simpleKeep.$dirty}">
               <p translate class="help-block">Files are moved to date stamped versions in a .stversions directory when replaced or deleted by Syncthing.</p>
               <label translate for="simpleKeep">Keep Versions</label>
-              <input name="simpleKeep" id="simpleKeep" class="form-control" type="number" ng-model="currentFolder.simpleKeep" required min="1">
+              <input name="simpleKeep" id="simpleKeep" class="form-control" type="number" ng-model="currentFolder.simpleKeep" required="" aria-required="true" min="1"/>
               <p class="help-block">
                 <span translate ng-if="folderEditor.simpleKeep.$valid || folderEditor.simpleKeep.$pristine">The number of old versions to keep, per file.</span>
                 <span translate ng-if="folderEditor.simpleKeep.$error.required && folderEditor.simpleKeep.$dirty">The number of versions must be a number and cannot be blank.</span>
@@ -163,7 +163,7 @@
               <p class="help-block"><span translate>Files are moved to date stamped versions in a .stversions directory when replaced or deleted by Syncthing.</span> <span translate>Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.</span></p>
               <p translate class="help-block">The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.</p>
               <label translate for="staggeredMaxAge">Maximum Age</label>
-              <input name="staggeredMaxAge" id="staggeredMaxAge" class="form-control" type="number" ng-model="currentFolder.staggeredMaxAge" required min="0">
+              <input name="staggeredMaxAge" id="staggeredMaxAge" class="form-control" type="number" ng-model="currentFolder.staggeredMaxAge" required=""  aria-required="true" min="0"/>
               <p class="help-block">
                 <span translate ng-if="folderEditor.staggeredMaxAge.$valid || folderEditor.staggeredMaxAge.$pristine">The maximum time to keep a version (in days, set to 0 to keep versions forever).</span>
                 <span translate ng-if="folderEditor.staggeredMaxAge.$error.required && folderEditor.staggeredMaxAge.$dirty">The maximum age must be a number and cannot be blank.</span>
@@ -172,13 +172,13 @@
             </div>
             <div class="form-group" ng-if="currentFolder.fileVersioningSelector == 'staggered'">
               <label translate for="staggeredVersionsPath">Versions Path</label>
-              <input name="staggeredVersionsPath" id="staggeredVersionsPath" class="form-control" type="text" ng-model="currentFolder.staggeredVersionsPath">
+              <input name="staggeredVersionsPath" id="staggeredVersionsPath" class="form-control" type="text" ng-model="currentFolder.staggeredVersionsPath"/>
               <p translate class="help-block">Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).</p>
             </div>
             <div class="form-group" ng-if="currentFolder.fileVersioningSelector=='external'" ng-class="{'has-error': folderEditor.externalCommand.$invalid && folderEditor.externalCommand.$dirty}">
               <p translate class="help-block">An external command handles the versioning. It has to remove the file from the shared folder.</p>
               <label translate for="externalCommand">Command</label>
-              <input name="externalCommand" id="externalCommand" class="form-control" type="text" ng-model="currentFolder.externalCommand" required>
+              <input name="externalCommand" id="externalCommand" class="form-control" type="text" ng-model="currentFolder.externalCommand" required="" aria-required="true" />
               <p class="help-block">
                 <span translate ng-if="folderEditor.externalCommand.$valid || folderEditor.externalCommand.$pristine">The first command line parameter is the folder path and the second parameter is the relative path in the folder.</span>
                 <span translate ng-if="folderEditor.externalCommand.$error.required && folderEditor.externalCommand.$dirty">The path cannot be blank.</span>

gui/default/syncthing/settings/settingsModalView.html

@@ -6,18 +6,18 @@
         <div class="col-md-6">
           <div class="form-group">
             <label translate for="DeviceName">Device Name</label>
-            <input id="DeviceName" class="form-control" type="text" ng-model="tmpOptions.deviceName">
+            <input id="DeviceName" class="form-control" type="text" ng-model="tmpOptions.deviceName"/>
           </div>
 
           <div class="form-group">
             <label translate for="ListenAddressesStr">Sync Protocol Listen Addresses</label>&emsp;<a href="https://docs.syncthing.net/users/config.html#listen-addresses" target="_blank"><span class="fa fa-fw fa-book"></span>&nbsp;<span translate>Help</span></a>
 
-            <input id="ListenAddressesStr" class="form-control" type="text" ng-model="tmpOptions._listenAddressesStr">
+            <input id="ListenAddressesStr" class="form-control" type="text" ng-model="tmpOptions._listenAddressesStr"/>
           </div>
 
           <div class="form-group" ng-class="{'has-error': settingsEditor.MaxRecvKbps.$invalid && settingsEditor.MaxRecvKbps.$dirty}">
             <label translate for="MaxRecvKbps">Incoming Rate Limit (KiB/s)</label>
-            <input id="MaxRecvKbps" name="MaxRecvKbps" class="form-control" type="number" ng-model="tmpOptions.maxRecvKbps" min="0">
+            <input id="MaxRecvKbps" name="MaxRecvKbps" class="form-control" type="number" ng-model="tmpOptions.maxRecvKbps" min="0"/>
             <p class="help-block">
               <span translate ng-if="settingsEditor.MaxRecvKbps.$error.min && settingsEditor.MaxRecvKbps.$dirty">The rate limit must be a non-negative number (0: no limit)</span>
             </p>
@@ -25,7 +25,7 @@
 
           <div class="form-group" ng-class="{'has-error': settingsEditor.MaxSendKbps.$invalid && settingsEditor.MaxSendKbps.$dirty}">
             <label translate for="MaxSendKbps">Outgoing Rate Limit (KiB/s)</label>
-            <input id="MaxSendKbps" name="MaxSendKbps" class="form-control" type="number" ng-model="tmpOptions.maxSendKbps" min="0">
+            <input id="MaxSendKbps" name="MaxSendKbps" class="form-control" type="number" ng-model="tmpOptions.maxSendKbps" min="0"/>
             <p class="help-block">
               <span translate ng-if="settingsEditor.MaxSendKbps.$error.min && settingsEditor.MaxSendKbps.$dirty">The rate limit must be a non-negative number (0: no limit)</span>
             </p>
@@ -36,7 +36,7 @@
               <div class="form-group">
                 <div class="checkbox">
                   <label>
-                    <input id="NATEnabled" type="checkbox" ng-model="tmpOptions.natEnabled"> <span translate>Enable NAT traversal</span>
+                    <input id="NATEnabled" type="checkbox" ng-model="tmpOptions.natEnabled"/> <span translate>Enable NAT traversal</span>
                   </label>
                 </div>
               </div>
@@ -45,7 +45,7 @@
               <div class="form-group">
                 <div class="checkbox">
                   <label>
-                    <input id="LocalAnnEnabled" type="checkbox" ng-model="tmpOptions.localAnnounceEnabled"> <span translate>Local Discovery</span>
+                    <input id="LocalAnnEnabled" type="checkbox" ng-model="tmpOptions.localAnnounceEnabled"/> <span translate>Local Discovery</span>
                   </label>
                 </div>
               </div>
@@ -57,7 +57,7 @@
               <div class="form-group">
                 <div class="checkbox">
                   <label>
-                    <input id="GlobalAnnEnabled" type="checkbox" ng-model="tmpOptions.globalAnnounceEnabled"> <span translate>Global Discovery</span>
+                    <input id="GlobalAnnEnabled" type="checkbox" ng-model="tmpOptions.globalAnnounceEnabled"/> <span translate>Global Discovery</span>
                   </label>
                 </div>
               </div>
@@ -66,7 +66,7 @@
               <div class="form-group">
                 <div class="checkbox">
                   <label>
-                    <input id="RelaysEnabled" type="checkbox" ng-model="tmpOptions.relaysEnabled"> <span translate>Enable Relaying</span>
+                    <input id="RelaysEnabled" type="checkbox" ng-model="tmpOptions.relaysEnabled"/> <span translate>Enable Relaying</span>
                   </label>
                 </div>
               </div>
@@ -76,13 +76,13 @@
           <div class="clearfix"></div>
           <div class="form-group">
             <label translate for="GlobalAnnServersStr">Global Discovery Servers</label>
-            <input ng-disabled="!tmpOptions.globalAnnounceEnabled" id="GlobalAnnServersStr" class="form-control" type="text" ng-model="tmpOptions._globalAnnounceServersStr">
+            <input ng-disabled="!tmpOptions.globalAnnounceEnabled" id="GlobalAnnServersStr" class="form-control" type="text" ng-model="tmpOptions._globalAnnounceServersStr"/>
           </div>
 
           <div class="form-horizontal">
             <div class="form-group" ng-class="{'has-error': settingsEditor.minHomeDiskFree.$invalid && settingsEditor.minHomeDiskFree.$dirty}">
               <label class="col-xs-12" for="minHomeDiskFree"><span translate>Minimum Free Disk Space</span></label><br/>
-              <div class="col-xs-9"><input name="minHomeDiskFree" id="minHomeDiskFree" class="form-control" type="number" ng-model="tmpOptions.minHomeDiskFree.value" required min="0" step="0.01"></div>
+              <div class="col-xs-9"><input name="minHomeDiskFree" id="minHomeDiskFree" class="form-control" type="number" ng-model="tmpOptions.minHomeDiskFree.value" required=""  aria-required="true" min="0" step="0.01"/></div>
               <div class="col-xs-3"><select class="col-sm-3 form-control" ng-model="tmpOptions.minHomeDiskFree.unit">
                 <option value="%">%</option>
                 <option value="kB">kB</option>
@@ -102,30 +102,30 @@
         <div class="col-md-6">
           <div class="form-group"  ng-class="{'has-error': settingsEditor.Address.$invalid && settingsEditor.Address.$dirty}">
             <label translate for="Address">GUI Listen Address</label>&emsp;<a href="https://docs.syncthing.net/users/guilisten.html" target="_blank"><span class="fa fa-fw fa-book"></span>&nbsp;<span translate>Help</span></a>
-            <input id="Address" name="Address" class="form-control" type="text" ng-model="tmpGUI.address" ng-pattern="/.*:0*((102[4-9])|(10[3-9][0-9])|(1[1-9][0-9][0-9])|([2-9][0-9][0-9][0-9])|([1-6]\d{4}))$/">
+            <input id="Address" name="Address" class="form-control" type="text" ng-model="tmpGUI.address" ng-pattern="/.*:0*((102[4-9])|(10[3-9][0-9])|(1[1-9][0-9][0-9])|([2-9][0-9][0-9][0-9])|([1-6]\d{4}))$/"/>
               <p class="help-block" ng-show="settingsEditor.Address.$invalid" translate>
                 Enter a non-privileged port number (1024 - 65535).
               </p>
           </div>
           <div class="form-group">
             <label translate for="User">GUI Authentication User</label>
-            <input id="User" class="form-control" type="text" ng-model="tmpGUI.user">
+            <input id="User" class="form-control" type="text" ng-model="tmpGUI.user"/>
           </div>
           <div class="form-group">
             <label translate for="Password">GUI Authentication Password</label>
-            <input id="Password" class="form-control" type="password" ng-model="tmpGUI.password" ng-trim="false">
+            <input id="Password" class="form-control" type="password" ng-model="tmpGUI.password" ng-trim="false"/>
           </div>
           <div class="form-group">
             <div class="checkbox">
               <label>
-                <input id="UseTLS" type="checkbox" ng-model="tmpGUI.useTLS"> <span translate>Use HTTPS for GUI</span>
+                <input id="UseTLS" type="checkbox" ng-model="tmpGUI.useTLS"/> <span translate>Use HTTPS for GUI</span>
               </label>
             </div>
           </div>
           <div class="form-group">
             <div class="checkbox">
               <label>
-                <input id="StartBrowser" type="checkbox" ng-model="tmpOptions.startBrowser"> <span translate>Start Browser</span>
+                <input id="StartBrowser" type="checkbox" ng-model="tmpOptions.startBrowser"/> <span translate>Start Browser</span>
               </label>
             </div>
           </div>
@@ -141,7 +141,7 @@
           <div class="form-group">
             <div class="checkbox" ng-if="tmpOptions.upgrades != 'candidate'">
               <label>
-                <input id="UREnabled" type="checkbox" ng-model="tmpOptions.urEnabled"> <span translate>Anonymous Usage Reporting</span> (<a href="" translate data-toggle="modal" data-target="#urPreview">Preview</a>)
+                <input id="UREnabled" type="checkbox" ng-model="tmpOptions.urEnabled"/> <span translate>Anonymous Usage Reporting</span> (<a href="" translate data-toggle="modal" data-target="#urPreview">Preview</a>)
               </label>
             </div>
             <p class="help-block" ng-if="tmpOptions.upgrades == 'candidate'">

gui/default/syncthing/transfer/failedFilesModalView.html

@@ -14,7 +14,7 @@
     <ul class="pagination pull-right">
       <li ng-repeat="option in [10, 25, 50]" ng-class="{ active: failedPageSize == option }">
         <a href="#" ng-click="failedChangePageSize(option)">{{option}}</a>
-      <li>
+      </li>
     </ul>
     <div class="clearfix"></div>
   </div>

gui/default/syncthing/transfer/neededFilesModalView.html

@@ -60,7 +60,7 @@
     <ul class="pagination pull-right">
       <li ng-repeat="option in [10, 25, 50]" ng-class="{ active: neededPageSize == option }">
         <a href="#" ng-click="neededChangePageSize(option)">{{option}}</a>
-      <li>
+      </li>
     </ul>
     <div class="clearfix"></div>
   </div>

jenkins/common.bash

@@ -65,7 +65,30 @@ function test {
 
 function testWithCoverage {
     echo Test with coverage
-    CGO_ENABLED=1 ./build.sh test-cov
+    CGO_ENABLED=1
+
+    echo "mode: set" > coverage.out
+    fail=0
+
+    # For every package in the repo
+    for dir in $(go list ./lib/... ./cmd/...) ; do
+        # run the tests
+        GOPATH="$(pwd)/Godeps/_workspace:$GOPATH" go test -coverprofile=profile.out $dir
+        if [ -f profile.out ] ; then
+            # and if there was test output, append it to coverage.out
+            grep -v "mode: " profile.out >> coverage.out
+            rm profile.out
+        fi
+    done
+
+    gocov convert coverage.out | gocov-xml > coverage.xml
+
+    # This is usually run from within Jenkins. If it is, we need to
+    # tweak the paths in coverage.xml so cobertura finds the
+    # source.
+    if [[ "${WORKSPACE:-default}" != "default" ]] ; then
+        sed "s#$WORKSPACE##g" < coverage.xml > coverage.xml.new && mv coverage.xml.new coverage.xml
+    fi
 
     notCovered=$(egrep -c '\s0$' coverage.out)
     total=$(wc -l coverage.out | awk '{print $1}')
@@ -73,6 +96,8 @@ function testWithCoverage {
     echo "$coverPct" > "coverage.txt"
     echo "Test coverage is $coverPct%%"
     echo
+
+    CGO_ENABLED=0 # reset to before
 }
 
 function buildSource {

lib/config/config.go

@@ -17,6 +17,8 @@ import (
 	"net/url"
 	"os"
 	"path"
+	"path/filepath"
+	"runtime"
 	"sort"
 	"strconv"
 	"strings"
@@ -29,7 +31,7 @@ import (
 
 const (
 	OldestHandledVersion = 10
-	CurrentVersion       = 20
+	CurrentVersion       = 21
 	MaxRescanIntervalS   = 365 * 24 * 60 * 60
 )
 
@@ -268,6 +270,14 @@ func (cfg *Configuration) clean() error {
 		seenFolders[folder.ID] = struct{}{}
 	}
 
+	// Remove ignored folders that are anyway part of the configuration.
+	for i := 0; i < len(cfg.IgnoredFolders); i++ {
+		if _, ok := seenFolders[cfg.IgnoredFolders[i]]; ok {
+			cfg.IgnoredFolders = append(cfg.IgnoredFolders[:i], cfg.IgnoredFolders[i+1:]...)
+			i-- // IgnoredFolders[i] now points to something else, so needs to be rechecked
+		}
+	}
+
 	cfg.Options.ListenAddresses = util.UniqueStrings(cfg.Options.ListenAddresses)
 	cfg.Options.GlobalAnnServers = util.UniqueStrings(cfg.Options.GlobalAnnServers)
 
@@ -306,6 +316,9 @@ func (cfg *Configuration) clean() error {
 	if cfg.Version == 19 {
 		convertV19V20(cfg)
 	}
+	if cfg.Version == 20 {
+		convertV20V21(cfg)
+	}
 
 	// Build a list of available devices
 	existingDevices := make(map[protocol.DeviceID]bool)
@@ -355,6 +368,30 @@ func (cfg *Configuration) clean() error {
 	return nil
 }
 
+func convertV20V21(cfg *Configuration) {
+	for _, folder := range cfg.Folders {
+		switch folder.Versioning.Type {
+		case "simple", "trashcan":
+			// Clean out symlinks in the known place
+			cleanSymlinks(filepath.Join(folder.Path(), ".stversions"))
+		case "staggered":
+			versionDir := folder.Versioning.Params["versionsPath"]
+			if versionDir == "" {
+				// default place
+				cleanSymlinks(filepath.Join(folder.Path(), ".stversions"))
+			} else if filepath.IsAbs(versionDir) {
+				// absolute
+				cleanSymlinks(versionDir)
+			} else {
+				// relative to folder
+				cleanSymlinks(filepath.Join(folder.Path(), versionDir))
+			}
+		}
+	}
+
+	cfg.Version = 21
+}
+
 func convertV19V20(cfg *Configuration) {
 	cfg.Options.MinHomeDiskFree = Size{Value: cfg.Options.DeprecatedMinHomeDiskFreePct, Unit: "%"}
 	cfg.Options.DeprecatedMinHomeDiskFreePct = 0
@@ -632,3 +669,23 @@ loop:
 	}
 	return devices[0:count]
 }
+
+func cleanSymlinks(dir string) {
+	if runtime.GOOS == "windows" {
+		// We don't do symlinks on Windows. Additionally, there may
+		// be things that look like symlinks that are not, which we
+		// should leave alone. Deduplicated files, for example.
+		return
+	}
+	filepath.Walk(dir, func(path string, info os.FileInfo, err error) error {
+		if err != nil {
+			return err
+		}
+		if info.Mode()&os.ModeSymlink != 0 {
+			l.Infoln("Removing incorrectly versioned symlink", path)
+			os.Remove(path)
+			return filepath.SkipDir
+		}
+		return nil
+	})
+}

lib/config/config_test.go

@@ -73,6 +73,7 @@ func TestDefaultValues(t *testing.T) {
 		KCPSendWindowSize:       128,
 		KCPUpdateIntervalMs:     25,
 		KCPFastResend:           false,
+		DefaultFolderPath:       "~",
 	}
 
 	cfg := New(device1)
@@ -221,6 +222,7 @@ func TestOverriddenValues(t *testing.T) {
 		KCPSendWindowSize:       1280,
 		KCPUpdateIntervalMs:     1000,
 		KCPFastResend:           true,
+		DefaultFolderPath:       "/media/syncthing",
 	}
 
 	os.Unsetenv("STNOUPGRADE")
@@ -807,3 +809,34 @@ func TestSharesRemovedOnDeviceRemoval(t *testing.T) {
 		t.Error("Unexpected extra device")
 	}
 }
+
+func TestIssue4219(t *testing.T) {
+	// Adding a folder that was previously ignored should make it unignored.
+
+	r := bytes.NewReader([]byte(`{
+		"folders": [
+			{"id": "abcd123"}
+		],
+		"ignoredFolders": ["t1", "abcd123", "t2"]
+	}`))
+
+	cfg, err := ReadJSON(r, protocol.LocalDeviceID)
+	if err != nil {
+		t.Fatal(err)
+	}
+
+	if len(cfg.IgnoredFolders) != 2 {
+		t.Errorf("There should be two ignored folders, not %d", len(cfg.IgnoredFolders))
+	}
+
+	w := Wrap("/tmp/cfg", cfg)
+	if !w.IgnoredFolder("t1") {
+		t.Error("Folder t1 should be ignored")
+	}
+	if !w.IgnoredFolder("t2") {
+		t.Error("Folder t2 should be ignored")
+	}
+	if w.IgnoredFolder("abcd123") {
+		t.Error("Folder abcd123 should not be ignored")
+	}
+}

lib/config/optionsconfiguration.go

@@ -140,6 +140,7 @@ type OptionsConfiguration struct {
 	KCPCongestionControl    bool                    `xml:"kcpCongestionControl" json:"kcpCongestionControl" default:"true"`
 	KCPSendWindowSize       int                     `xml:"kcpSendWindowSize" json:"kcpSendWindowSize" default:"128"`
 	KCPReceiveWindowSize    int                     `xml:"kcpReceiveWindowSize" json:"kcpReceiveWindowSize" default:"128"`
+	DefaultFolderPath       string                  `xml:"defaultFolderPath" json:"defaultFolderPath" default:"~"`
 
 	DeprecatedUPnPEnabled        bool     `xml:"upnpEnabled,omitempty" json:"-"`
 	DeprecatedUPnPLeaseM         int      `xml:"upnpLeaseMinutes,omitempty" json:"-"`

lib/config/testdata/overridenvalues.xml

@@ -38,11 +38,12 @@
         <stunKeepaliveSeconds>10</stunKeepaliveSeconds>
         <stunServer>a.stun.com</stunServer>
         <stunServer>b.stun.com</stunServer>
-		<defaultKCPEnabled>true</defaultKCPEnabled>
-		<kcpCongestionControl>false</kcpCongestionControl>
-		<kcpReceiveWindowSize>1280</kcpReceiveWindowSize>
-		<kcpSendWindowSize>1280</kcpSendWindowSize>
-		<kcpUpdateIntervalMs>1000</kcpUpdateIntervalMs>
-		<kcpFastResend>true</kcpFastResend>
+        <defaultKCPEnabled>true</defaultKCPEnabled>
+        <kcpCongestionControl>false</kcpCongestionControl>
+        <kcpReceiveWindowSize>1280</kcpReceiveWindowSize>
+        <kcpSendWindowSize>1280</kcpSendWindowSize>
+        <kcpUpdateIntervalMs>1000</kcpUpdateIntervalMs>
+        <kcpFastResend>true</kcpFastResend>
+        <defaultFolderPath>/media/syncthing</defaultFolderPath>
     </options>
 </configuration>

lib/config/testdata/v21.xml

@@ -0,0 +1,15 @@
+<configuration version="21">
+    <folder id="test" path="testdata" type="readonly" ignorePerms="false" rescanIntervalS="600" autoNormalize="true">
+        <device id="AIR6LPZ-7K4PTTV-UXQSMUU-CPQ5YWH-OEDFIIQ-JUG777G-2YQXXR5-YD6AWQR"></device>
+        <device id="P56IOI7-MZJNU2Y-IQGDREY-DM2MGTI-MGL3BXN-PQ6W5BM-TBBZ4TJ-XZWICQ2"></device>
+        <minDiskFree unit="%">1</minDiskFree>
+        <maxConflicts>-1</maxConflicts>
+        <fsync>true</fsync>
+    </folder>
+    <device id="AIR6LPZ-7K4PTTV-UXQSMUU-CPQ5YWH-OEDFIIQ-JUG777G-2YQXXR5-YD6AWQR" name="node one" compression="metadata">
+        <address>tcp://a</address>
+    </device>
+    <device id="P56IOI7-MZJNU2Y-IQGDREY-DM2MGTI-MGL3BXN-PQ6W5BM-TBBZ4TJ-XZWICQ2" name="node two" compression="metadata">
+        <address>tcp://b</address>
+    </device>
+</configuration>

lib/connections/kcp_listen.go

@@ -187,7 +187,6 @@ func (t *kcpListener) stunRenewal(listener net.PacketConn) {
 	client := stun.NewClientWithConnection(listener)
 	client.SetSoftwareName("syncthing")
 
-	var uri url.URL
 	var natType stun.NATType
 	var extAddr *stun.Host
 	var err error
@@ -227,10 +226,12 @@ func (t *kcpListener) stunRenewal(listener net.PacketConn) {
 
 			for {
 				changed := false
-				uri = *t.uri
+
+				uri := *t.uri
 				uri.Host = extAddr.TransportAddr()
 
 				t.mut.Lock()
+
 				if t.address == nil || t.address.String() != uri.String() {
 					l.Infof("%s resolved external address %s (via %s)", t.uri, uri.String(), addr)
 					t.address = &uri

lib/connections/kcp_misc.go

@@ -26,8 +26,8 @@ var (
 
 type filterList []*pfilter.PacketFilter
 
-// Sort connections by wether the are unspecified or not, as connections
-// listenin on all addresses are more useful.
+// Sort connections by whether they are unspecified or not, as connections
+// listening on all addresses are more useful.
 func (f filterList) Len() int      { return len(f) }
 func (f filterList) Swap(i, j int) { f[i], f[j] = f[j], f[i] }
 func (f filterList) Less(i, j int) bool {
@@ -92,7 +92,7 @@ func (f *kcpConversationFilter) Outgoing(out []byte, addr net.Addr) {
 }
 
 func (kcpConversationFilter) isKCPConv(data []byte) bool {
-	// Need atleast 5 bytes
+	// Need at least 5 bytes
 	if len(data) < 5 {
 		return false
 	}
@@ -143,7 +143,7 @@ func (f *stunFilter) ClaimIncoming(in []byte, addr net.Addr) bool {
 }
 
 func (f *stunFilter) isStunPayload(data []byte) bool {
-	// Need atleast 20 bytes
+	// Need at least 20 bytes
 	if len(data) < 20 {
 		return false
 	}

lib/db/namespaced_test.go

@@ -51,14 +51,14 @@ func TestNamespacedTime(t *testing.T) {
 
 	n1 := NewNamespacedKV(ldb, "foo")
 
-	if v, ok := n1.Time("test"); v != (time.Time{}) || ok {
+	if v, ok := n1.Time("test"); !v.IsZero() || ok {
 		t.Errorf("Incorrect return v %v != %v || ok %v != false", v, time.Time{}, ok)
 	}
 
 	now := time.Now()
 	n1.PutTime("test", now)
 
-	if v, ok := n1.Time("test"); v != now || !ok {
+	if v, ok := n1.Time("test"); !v.Equal(now) || !ok {
 		t.Errorf("Incorrect return v %v != %v || ok %v != true", v, now, ok)
 	}
 }

lib/ignore/cache.go

@@ -8,6 +8,12 @@ package ignore
 
 import "time"
 
+type nower interface {
+	Now() time.Time
+}
+
+var clock = nower(defaultClock{})
+
 type cache struct {
 	patterns []Pattern
 	entries  map[string]cacheEntry
@@ -27,7 +33,7 @@ func newCache(patterns []Pattern) *cache {
 
 func (c *cache) clean(d time.Duration) {
 	for k, v := range c.entries {
-		if time.Since(v.access) > d {
+		if clock.Now().Sub(v.access) > d {
 			delete(c.entries, k)
 		}
 	}
@@ -36,7 +42,7 @@ func (c *cache) clean(d time.Duration) {
 func (c *cache) get(key string) (Result, bool) {
 	entry, ok := c.entries[key]
 	if ok {
-		entry.access = time.Now()
+		entry.access = clock.Now()
 		c.entries[key] = entry
 	}
 	return entry.result, ok
@@ -50,3 +56,9 @@ func (c *cache) len() int {
 	l := len(c.entries)
 	return l
 }
+
+type defaultClock struct{}
+
+func (defaultClock) Now() time.Time {
+	return time.Now()
+}

lib/ignore/cache_test.go

@@ -12,6 +12,13 @@ import (
 )
 
 func TestCache(t *testing.T) {
+	fc := new(fakeClock)
+	oldClock := clock
+	clock = fc
+	defer func() {
+		clock = oldClock
+	}()
+
 	c := newCache(nil)
 
 	res, ok := c.get("nonexistent")
@@ -52,11 +59,11 @@ func TestCache(t *testing.T) {
 
 	// Sleep and access, to get some data for clean
 
-	time.Sleep(500 * time.Millisecond)
+	*fc += 500 // milliseconds
 
 	c.get("true")
 
-	time.Sleep(100 * time.Millisecond)
+	*fc += 100 // milliseconds
 
 	// "false" was accessed ~600 ms ago, "true" was accessed ~100 ms ago.
 	// This should clean out "false" but not "true"
@@ -75,3 +82,11 @@ func TestCache(t *testing.T) {
 		t.Errorf("item should have been cleaned")
 	}
 }
+
+type fakeClock int64 // milliseconds
+
+func (f *fakeClock) Now() time.Time {
+	t := time.Unix(int64(*f)/1000, (int64(*f)%1000)*int64(time.Millisecond))
+	*f++
+	return t
+}

lib/ignore/ignore.go

@@ -64,24 +64,59 @@ func (r Result) IsCaseFolded() bool {
 	return r&resultFoldCase == resultFoldCase
 }
 
-type Matcher struct {
-	lines     []string
-	patterns  []Pattern
-	withCache bool
-	matches   *cache
-	curHash   string
-	stop      chan struct{}
-	modtimes  map[string]time.Time
-	mut       sync.Mutex
+// The ChangeDetector is responsible for determining if files have changed
+// on disk. It gets told to Remember() files (name and modtime) and will
+// then get asked if a file has been Seen() (i.e., Remember() has been
+// called on it) and if any of the files have Changed(). To forget all
+// files, call Reset().
+type ChangeDetector interface {
+	Remember(name string, modtime time.Time)
+	Seen(name string) bool
+	Changed() bool
+	Reset()
 }
 
-func New(withCache bool) *Matcher {
-	m := &Matcher{
-		withCache: withCache,
-		stop:      make(chan struct{}),
-		mut:       sync.NewMutex(),
+type Matcher struct {
+	lines          []string  // exact lines read from .stignore
+	patterns       []Pattern // patterns including those from included files
+	withCache      bool
+	matches        *cache
+	curHash        string
+	stop           chan struct{}
+	changeDetector ChangeDetector
+	mut            sync.Mutex
+}
+
+// An Option can be passed to New()
+type Option func(*Matcher)
+
+// WithCache enables or disables lookup caching. The default is disabled.
+func WithCache(v bool) Option {
+	return func(m *Matcher) {
+		m.withCache = v
 	}
-	if withCache {
+}
+
+// WithChangeDetector sets a custom ChangeDetector. The default is to simply
+// use the on disk modtime for comparison.
+func WithChangeDetector(cd ChangeDetector) Option {
+	return func(m *Matcher) {
+		m.changeDetector = cd
+	}
+}
+
+func New(opts ...Option) *Matcher {
+	m := &Matcher{
+		stop: make(chan struct{}),
+		mut:  sync.NewMutex(),
+	}
+	for _, opt := range opts {
+		opt(m)
+	}
+	if m.changeDetector == nil {
+		m.changeDetector = newModtimeChecker()
+	}
+	if m.withCache {
 		go m.clean(2 * time.Hour)
 	}
 	return m
@@ -91,7 +126,7 @@ func (m *Matcher) Load(file string) error {
 	m.mut.Lock()
 	defer m.mut.Unlock()
 
-	if m.patternsUnchanged(file) {
+	if m.changeDetector.Seen(file) && !m.changeDetector.Changed() {
 		return nil
 	}
 
@@ -108,9 +143,8 @@ func (m *Matcher) Load(file string) error {
 		return err
 	}
 
-	m.modtimes = map[string]time.Time{
-		file: info.ModTime(),
-	}
+	m.changeDetector.Reset()
+	m.changeDetector.Remember(file, info.ModTime())
 
 	return m.parseLocked(fd, file)
 }
@@ -122,7 +156,7 @@ func (m *Matcher) Parse(r io.Reader, file string) error {
 }
 
 func (m *Matcher) parseLocked(r io.Reader, file string) error {
-	lines, patterns, err := parseIgnoreFile(r, file, m.modtimes)
+	lines, patterns, err := parseIgnoreFile(r, file, m.changeDetector)
 	// Error is saved and returned at the end. We process the patterns
 	// (possibly blank) anyway.
 
@@ -142,26 +176,6 @@ func (m *Matcher) parseLocked(r io.Reader, file string) error {
 	return err
 }
 
-// patternsUnchanged returns true if none of the files making up the loaded
-// patterns have changed since last check.
-func (m *Matcher) patternsUnchanged(file string) bool {
-	if _, ok := m.modtimes[file]; !ok {
-		return false
-	}
-
-	for filename, modtime := range m.modtimes {
-		info, err := os.Stat(filename)
-		if err != nil {
-			return false
-		}
-		if !info.ModTime().Equal(modtime) {
-			return false
-		}
-	}
-
-	return true
-}
-
 func (m *Matcher) Match(file string) (result Result) {
 	if m == nil || file == "." {
 		return resultNotMatched
@@ -284,8 +298,8 @@ func hashPatterns(patterns []Pattern) string {
 	return fmt.Sprintf("%x", h.Sum(nil))
 }
 
-func loadIgnoreFile(file string, modtimes map[string]time.Time) ([]string, []Pattern, error) {
-	if _, ok := modtimes[file]; ok {
+func loadIgnoreFile(file string, cd ChangeDetector) ([]string, []Pattern, error) {
+	if cd.Seen(file) {
 		return nil, nil, fmt.Errorf("multiple include of ignore file %q", file)
 	}
 
@@ -299,12 +313,13 @@ func loadIgnoreFile(file string, modtimes map[string]time.Time) ([]string, []Pat
 	if err != nil {
 		return nil, nil, err
 	}
-	modtimes[file] = info.ModTime()
 
-	return parseIgnoreFile(fd, file, modtimes)
+	cd.Remember(file, info.ModTime())
+
+	return parseIgnoreFile(fd, file, cd)
 }
 
-func parseIgnoreFile(fd io.Reader, currentFile string, modtimes map[string]time.Time) ([]string, []Pattern, error) {
+func parseIgnoreFile(fd io.Reader, currentFile string, cd ChangeDetector) ([]string, []Pattern, error) {
 	var lines []string
 	var patterns []Pattern
 
@@ -371,11 +386,10 @@ func parseIgnoreFile(fd io.Reader, currentFile string, modtimes map[string]time.
 		} else if strings.HasPrefix(line, "#include ") {
 			includeRel := line[len("#include "):]
 			includeFile := filepath.Join(filepath.Dir(currentFile), includeRel)
-			includeLines, includePatterns, err := loadIgnoreFile(includeFile, modtimes)
+			_, includePatterns, err := loadIgnoreFile(includeFile, cd)
 			if err != nil {
 				return fmt.Errorf("include of %q: %v", includeRel, err)
 			}
-			lines = append(lines, includeLines...)
 			patterns = append(patterns, includePatterns...)
 		} else {
 			// Path name or pattern, add it so it matches files both in
@@ -466,3 +480,41 @@ func WriteIgnores(path string, content []string) error {
 
 	return nil
 }
+
+// modtimeChecker is the default implementation of ChangeDetector
+type modtimeChecker struct {
+	modtimes map[string]time.Time
+}
+
+func newModtimeChecker() *modtimeChecker {
+	return &modtimeChecker{
+		modtimes: map[string]time.Time{},
+	}
+}
+
+func (c *modtimeChecker) Remember(name string, modtime time.Time) {
+	c.modtimes[name] = modtime
+}
+
+func (c *modtimeChecker) Seen(name string) bool {
+	_, ok := c.modtimes[name]
+	return ok
+}
+
+func (c *modtimeChecker) Reset() {
+	c.modtimes = map[string]time.Time{}
+}
+
+func (c *modtimeChecker) Changed() bool {
+	for name, modtime := range c.modtimes {
+		info, err := os.Stat(name)
+		if err != nil {
+			return true
+		}
+		if !info.ModTime().Equal(modtime) {
+			return true
+		}
+	}
+
+	return false
+}

lib/ignore/ignore_test.go

@@ -18,7 +18,7 @@ import (
 )
 
 func TestIgnore(t *testing.T) {
-	pats := New(true)
+	pats := New(WithCache(true))
 	err := pats.Load("testdata/.stignore")
 	if err != nil {
 		t.Fatal(err)
@@ -68,7 +68,7 @@ func TestExcludes(t *testing.T) {
 	i*2
 	!ign2
 	`
-	pats := New(true)
+	pats := New(WithCache(true))
 	err := pats.Parse(bytes.NewBufferString(stignore), ".stignore")
 	if err != nil {
 		t.Fatal(err)
@@ -113,7 +113,7 @@ func TestFlagOrder(t *testing.T) {
 	(?i)(?d)(?d)!ign9
 	(?d)(?d)!ign10
 	`
-	pats := New(true)
+	pats := New(WithCache(true))
 	err := pats.Parse(bytes.NewBufferString(stignore), ".stignore")
 	if err != nil {
 		t.Fatal(err)
@@ -148,7 +148,7 @@ func TestDeletables(t *testing.T) {
 	ign7
 	(?i)ign8
 	`
-	pats := New(true)
+	pats := New(WithCache(true))
 	err := pats.Parse(bytes.NewBufferString(stignore), ".stignore")
 	if err != nil {
 		t.Fatal(err)
@@ -187,7 +187,7 @@ func TestBadPatterns(t *testing.T) {
 	}
 
 	for _, pat := range badPatterns {
-		err := New(true).Parse(bytes.NewBufferString(pat), ".stignore")
+		err := New(WithCache(true)).Parse(bytes.NewBufferString(pat), ".stignore")
 		if err == nil {
 			t.Errorf("No error for pattern %q", pat)
 		}
@@ -195,7 +195,7 @@ func TestBadPatterns(t *testing.T) {
 }
 
 func TestCaseSensitivity(t *testing.T) {
-	ign := New(true)
+	ign := New(WithCache(true))
 	err := ign.Parse(bytes.NewBufferString("test"), ".stignore")
 	if err != nil {
 		t.Error(err)
@@ -247,7 +247,7 @@ func TestCaching(t *testing.T) {
 
 	fd2.WriteString("/y/\n")
 
-	pats := New(true)
+	pats := New(WithCache(true))
 	err = pats.Load(fd1.Name())
 	if err != nil {
 		t.Fatal(err)
@@ -354,7 +354,7 @@ func TestCommentsAndBlankLines(t *testing.T) {
 
 
 	`
-	pats := New(true)
+	pats := New(WithCache(true))
 	err := pats.Parse(bytes.NewBufferString(stignore), ".stignore")
 	if err != nil {
 		t.Error(err)
@@ -382,7 +382,7 @@ flamingo
 *.crow
 *.crow
 	`
-	pats := New(false)
+	pats := New()
 	err := pats.Parse(bytes.NewBufferString(stignore), ".stignore")
 	if err != nil {
 		b.Error(err)
@@ -424,7 +424,7 @@ flamingo
 	}
 
 	// Load the patterns
-	pats := New(true)
+	pats := New(WithCache(true))
 	err = pats.Load(fd.Name())
 	if err != nil {
 		b.Fatal(err)
@@ -460,7 +460,7 @@ func TestCacheReload(t *testing.T) {
 		t.Fatal(err)
 	}
 
-	pats := New(true)
+	pats := New(WithCache(true))
 	err = pats.Load(fd.Name())
 	if err != nil {
 		t.Fatal(err)
@@ -515,7 +515,7 @@ func TestCacheReload(t *testing.T) {
 }
 
 func TestHash(t *testing.T) {
-	p1 := New(true)
+	p1 := New(WithCache(true))
 	err := p1.Load("testdata/.stignore")
 	if err != nil {
 		t.Fatal(err)
@@ -531,7 +531,7 @@ func TestHash(t *testing.T) {
 	/ffile
 	lost+found
 	`
-	p2 := New(true)
+	p2 := New(WithCache(true))
 	err = p2.Parse(bytes.NewBufferString(stignore), ".stignore")
 	if err != nil {
 		t.Fatal(err)
@@ -546,7 +546,7 @@ func TestHash(t *testing.T) {
 	/ffile
 	lost+found
 	`
-	p3 := New(true)
+	p3 := New(WithCache(true))
 	err = p3.Parse(bytes.NewBufferString(stignore), ".stignore")
 	if err != nil {
 		t.Fatal(err)
@@ -570,7 +570,7 @@ func TestHash(t *testing.T) {
 }
 
 func TestHashOfEmpty(t *testing.T) {
-	p1 := New(true)
+	p1 := New(WithCache(true))
 	err := p1.Load("testdata/.stignore")
 	if err != nil {
 		t.Fatal(err)
@@ -608,7 +608,7 @@ func TestWindowsPatterns(t *testing.T) {
 	a/b
 	c\d
 	`
-	pats := New(true)
+	pats := New(WithCache(true))
 	err := pats.Parse(bytes.NewBufferString(stignore), ".stignore")
 	if err != nil {
 		t.Fatal(err)
@@ -633,7 +633,7 @@ func TestAutomaticCaseInsensitivity(t *testing.T) {
 	A/B
 	c/d
 	`
-	pats := New(true)
+	pats := New(WithCache(true))
 	err := pats.Parse(bytes.NewBufferString(stignore), ".stignore")
 	if err != nil {
 		t.Fatal(err)
@@ -652,7 +652,7 @@ func TestCommas(t *testing.T) {
 	foo,bar.txt
 	{baz,quux}.txt
 	`
-	pats := New(true)
+	pats := New(WithCache(true))
 	err := pats.Parse(bytes.NewBufferString(stignore), ".stignore")
 	if err != nil {
 		t.Fatal(err)
@@ -683,7 +683,7 @@ func TestIssue3164(t *testing.T) {
 	(?d)(?i)/foo
 	(?d)(?i)**/bar
 	`
-	pats := New(true)
+	pats := New(WithCache(true))
 	err := pats.Parse(bytes.NewBufferString(stignore), ".stignore")
 	if err != nil {
 		t.Fatal(err)
@@ -719,7 +719,7 @@ func TestIssue3174(t *testing.T) {
 	stignore := `
 	*ä*
 	`
-	pats := New(true)
+	pats := New(WithCache(true))
 	err := pats.Parse(bytes.NewBufferString(stignore), ".stignore")
 	if err != nil {
 		t.Fatal(err)
@@ -734,7 +734,7 @@ func TestIssue3639(t *testing.T) {
 	stignore := `
 	foo/
 	`
-	pats := New(true)
+	pats := New(WithCache(true))
 	err := pats.Parse(bytes.NewBufferString(stignore), ".stignore")
 	if err != nil {
 		t.Fatal(err)
@@ -767,7 +767,7 @@ func TestIssue3674(t *testing.T) {
 		{"as/dc", true},
 	}
 
-	pats := New(true)
+	pats := New(WithCache(true))
 	err := pats.Parse(bytes.NewBufferString(stignore), ".stignore")
 	if err != nil {
 		t.Fatal(err)
@@ -799,7 +799,7 @@ func TestGobwasGlobIssue18(t *testing.T) {
 		{"bbaa", false},
 	}
 
-	pats := New(true)
+	pats := New(WithCache(true))
 	err := pats.Parse(bytes.NewBufferString(stignore), ".stignore")
 	if err != nil {
 		t.Fatal(err)
@@ -859,7 +859,7 @@ func TestRoot(t *testing.T) {
 		{"b", true},
 	}
 
-	pats := New(true)
+	pats := New(WithCache(true))
 	err := pats.Parse(bytes.NewBufferString(stignore), ".stignore")
 	if err != nil {
 		t.Fatal(err)
@@ -872,3 +872,38 @@ func TestRoot(t *testing.T) {
 		}
 	}
 }
+
+func TestLines(t *testing.T) {
+	stignore := `
+	#include testdata/excludes
+	
+	!/a
+	/*
+	`
+
+	pats := New(WithCache(true))
+	err := pats.Parse(bytes.NewBufferString(stignore), ".stignore")
+	if err != nil {
+		t.Fatal(err)
+	}
+
+	expectedLines := []string{
+		"",
+		"#include testdata/excludes",
+		"",
+		"!/a",
+		"/*",
+		"",
+	}
+
+	lines := pats.Lines()
+	if len(lines) != len(expectedLines) {
+		t.Fatalf("len(Lines()) == %d, expected %d", len(lines), len(expectedLines))
+	}
+	for i := range lines {
+		if lines[i] != expectedLines[i] {
+			t.Fatalf("Lines()[%d] == %s, expected %s", i, lines[i], expectedLines[i])
+		}
+	}
+
+}

lib/logger/logger.go

@@ -28,6 +28,8 @@ const (
 	NumLevels
 )
 
+const DebugFlags = log.Ltime | log.Ldate | log.Lmicroseconds | log.Lshortfile
+
 // A MessageHandler is called with the log level and message text.
 type MessageHandler func(l LogLevel, msg string)
 
@@ -215,6 +217,7 @@ func (l *logger) SetDebug(facility string, enabled bool) {
 	l.mut.Lock()
 	l.debug[facility] = enabled
 	l.mut.Unlock()
+	l.SetFlags(DebugFlags)
 }
 
 // FacilityDebugging returns the set of facilities that have debugging

lib/model/model.go

@@ -314,7 +314,7 @@ func (m *Model) addFolderLocked(cfg config.FolderConfiguration) {
 		m.deviceFolders[device.DeviceID] = append(m.deviceFolders[device.DeviceID], cfg.ID)
 	}
 
-	ignores := ignore.New(m.cacheIgnoredFiles)
+	ignores := ignore.New(ignore.WithCache(m.cacheIgnoredFiles))
 	if err := ignores.Load(filepath.Join(cfg.Path(), ".stignore")); err != nil && !os.IsNotExist(err) {
 		l.Warnln("Loading ignores:", err)
 	}
@@ -533,7 +533,7 @@ func (m *Model) Completion(device protocol.DeviceID, folder string) FolderComple
 
 	// If the completion is 100% but there are deletes we need to handle,
 	// drop it down a notch. Hack for consumers that look only at the
-	// percentage (our own GUI does the same calculation as here on it's own
+	// percentage (our own GUI does the same calculation as here on its own
 	// and needs the same fixup).
 	if need == 0 && deletes > 0 {
 		completionPct = 95 // chosen by fair dice roll
@@ -1260,7 +1260,7 @@ func (m *Model) GetIgnores(folder string) ([]string, []string, error) {
 	}
 
 	if cfg, ok := m.cfg.Folders()[folder]; ok {
-		matcher := ignore.New(false)
+		matcher := ignore.New()
 		path := filepath.Join(cfg.Path(), ".stignore")
 		if err := matcher.Load(path); err != nil {
 			return nil, nil, err

lib/model/model_test.go

@@ -350,6 +350,24 @@ func (f *fakeConnection) addFile(name string, flags uint32, ftype protocol.FileI
 	f.fileData[name] = data
 }
 
+func (f *fakeConnection) deleteFile(name string) {
+	f.mut.Lock()
+	defer f.mut.Unlock()
+
+	for i, fi := range f.files {
+		if fi.Name == name {
+			fi.Deleted = true
+			fi.ModifiedS = time.Now().Unix()
+			fi.Version = fi.Version.Update(f.id.Short())
+			fi.Sequence = time.Now().UnixNano()
+			fi.Blocks = nil
+
+			f.files = append(append(f.files[:i], f.files[i+1:]...), fi)
+			return
+		}
+	}
+}
+
 func (f *fakeConnection) sendIndexUpdate() {
 	f.model.IndexUpdate(f.id, f.folder, f.files)
 }
@@ -953,14 +971,6 @@ func changeIgnores(t *testing.T, m *Model, expected []string) {
 
 	ignores = append(ignores, "pox")
 
-	if runtime.GOOS == "darwin" {
-		// Mac has seconds-only timestamp precision, which tricks the ignore
-		// system into thinking the file has not changed. Work around it in
-		// an ugly way...
-		time.Sleep(time.Second)
-	} else {
-		time.Sleep(time.Millisecond)
-	}
 	err = m.SetIgnores("default", ignores)
 	if err != nil {
 		t.Error(err)
@@ -1011,6 +1021,14 @@ func TestIgnores(t *testing.T) {
 	m.AddFolder(defaultFolderConfig)
 	m.StartFolder("default")
 
+	// Reach in and update the ignore matcher to one that always does
+	// reloads when asked to, instead of checking file mtimes. This is
+	// because we will be changing the files on disk often enough that the
+	// mtimes will be unreliable to determine change status.
+	m.fmut.Lock()
+	m.folderIgnores["default"] = ignore.New(ignore.WithCache(true), ignore.WithChangeDetector(newAlwaysChanged()))
+	m.fmut.Unlock()
+
 	// Make sure the initial scan has finished (ScanFolders is blocking)
 	m.ScanFolders()
 
@@ -1843,7 +1861,7 @@ func TestIssue3164(t *testing.T) {
 	f := protocol.FileInfo{
 		Name: "issue3164",
 	}
-	m := ignore.New(false)
+	m := ignore.New()
 	if err := m.Parse(bytes.NewBufferString("(?d)oktodelete"), ""); err != nil {
 		t.Fatal(err)
 	}
@@ -2490,3 +2508,31 @@ func (fakeAddr) Network() string {
 func (fakeAddr) String() string {
 	return "address"
 }
+
+// alwaysChanges is an ignore.ChangeDetector that always returns true on Changed()
+type alwaysChanged struct {
+	seen map[string]struct{}
+}
+
+func newAlwaysChanged() *alwaysChanged {
+	return &alwaysChanged{
+		seen: make(map[string]struct{}),
+	}
+}
+
+func (c *alwaysChanged) Remember(name string, _ time.Time) {
+	c.seen[name] = struct{}{}
+}
+
+func (c *alwaysChanged) Reset() {
+	c.seen = make(map[string]struct{})
+}
+
+func (c *alwaysChanged) Seen(name string) bool {
+	_, ok := c.seen[name]
+	return ok
+}
+
+func (c *alwaysChanged) Changed() bool {
+	return true
+}

lib/model/requests_test.go

@@ -10,6 +10,7 @@ import (
 	"bytes"
 	"io/ioutil"
 	"os"
+	"path/filepath"
 	"runtime"
 	"strings"
 	"testing"
@@ -204,6 +205,86 @@ func TestRequestCreateTmpSymlink(t *testing.T) {
 	}
 }
 
+func TestRequestVersioningSymlinkAttack(t *testing.T) {
+	if runtime.GOOS == "windows" {
+		t.Skip("no symlink support on Windows")
+	}
+
+	// Sets up a folder with trashcan versioning and tries to use a
+	// deleted symlink to escape
+
+	cfg := defaultConfig.RawCopy()
+	cfg.Folders[0] = config.NewFolderConfiguration("default", "_tmpfolder")
+	cfg.Folders[0].PullerSleepS = 1
+	cfg.Folders[0].Devices = []config.FolderDeviceConfiguration{
+		{DeviceID: device1},
+		{DeviceID: device2},
+	}
+	cfg.Folders[0].Versioning = config.VersioningConfiguration{
+		Type: "trashcan",
+	}
+	w := config.Wrap("/tmp/cfg", cfg)
+
+	db := db.OpenMemory()
+	m := NewModel(w, device1, "syncthing", "dev", db, nil)
+	m.AddFolder(cfg.Folders[0])
+	m.ServeBackground()
+	m.StartFolder("default")
+	defer m.Stop()
+
+	defer os.RemoveAll("_tmpfolder")
+
+	fc := addFakeConn(m, device2)
+	fc.folder = "default"
+
+	// Create a temporary directory that we will use as target to see if
+	// we can escape to it
+	tmpdir, err := ioutil.TempDir("", "syncthing-test")
+	if err != nil {
+		t.Fatal(err)
+	}
+
+	// We listen for incoming index updates and trigger when we see one for
+	// the expected test file.
+	idx := make(chan int)
+	fc.mut.Lock()
+	fc.indexFn = func(folder string, fs []protocol.FileInfo) {
+		idx <- len(fs)
+	}
+	fc.mut.Unlock()
+
+	// Send an update for the test file, wait for it to sync and be reported back.
+	fc.addFile("foo", 0644, protocol.FileInfoTypeSymlink, []byte(tmpdir))
+	fc.sendIndexUpdate()
+
+	for updates := 0; updates < 1; updates += <-idx {
+	}
+
+	// Delete the symlink, hoping for it to get versioned
+	fc.deleteFile("foo")
+	fc.sendIndexUpdate()
+	for updates := 0; updates < 1; updates += <-idx {
+	}
+
+	// Recreate foo and a file in it with some data
+	fc.addFile("foo", 0755, protocol.FileInfoTypeDirectory, nil)
+	fc.addFile("foo/test", 0644, protocol.FileInfoTypeFile, []byte("testtesttest"))
+	fc.sendIndexUpdate()
+	for updates := 0; updates < 1; updates += <-idx {
+	}
+
+	// Remove the test file and see if it escaped
+	fc.deleteFile("foo/test")
+	fc.sendIndexUpdate()
+	for updates := 0; updates < 1; updates += <-idx {
+	}
+
+	path := filepath.Join(tmpdir, "test")
+	if _, err := os.Lstat(path); !os.IsNotExist(err) {
+		t.Fatal("File escaped to", path)
+	}
+}
+
 func setupModelWithConnection() (*Model, *fakeConnection) {
 	cfg := defaultConfig.RawCopy()
 	cfg.Folders[0] = config.NewFolderConfiguration("default", "_tmpfolder")

lib/model/rwfolder.go

@@ -855,7 +855,7 @@ func (f *sendReceiveFolder) deleteFile(file protocol.FileInfo) {
 		err = osutil.InWritableDir(func(name string) error {
 			return f.moveForConflict(name, file.ModifiedBy.String())
 		}, realName)
-	} else if f.versioner != nil {
+	} else if f.versioner != nil && !cur.IsSymlink() {
 		err = osutil.InWritableDir(f.versioner.Archive, realName)
 	} else {
 		err = osutil.InWritableDir(os.Remove, realName)
@@ -1463,7 +1463,7 @@ func (f *sendReceiveFolder) performFinish(state *sharedPullerState) error {
 				return err
 			}
 
-		case f.versioner != nil:
+		case f.versioner != nil && !state.file.IsSymlink():
 			// If we should use versioning, let the versioner archive the old
 			// file before we replace it. Archiving a non-existent file is not
 			// an error.

lib/scanner/walk_test.go

@@ -54,7 +54,7 @@ func init() {
 }
 
 func TestWalkSub(t *testing.T) {
-	ignores := ignore.New(false)
+	ignores := ignore.New()
 	err := ignores.Load("testdata/.stignore")
 	if err != nil {
 		t.Fatal(err)
@@ -90,7 +90,7 @@ func TestWalkSub(t *testing.T) {
 }
 
 func TestWalk(t *testing.T) {
-	ignores := ignore.New(false)
+	ignores := ignore.New()
 	err := ignores.Load("testdata/.stignore")
 	if err != nil {
 		t.Fatal(err)

lib/upgrade/upgrade_common.go

@@ -104,20 +104,26 @@ func CompareVersions(a, b string) Relation {
 	for i := 0; i < minlen; i++ {
 		if arel[i] < brel[i] {
 			if i == 0 {
+				// major version difference
+				if arel[0] == 0 && brel[0] == 1 {
+					// special case, v0.x is equivalent in majorness to v1.x.
+					return Older
+				}
 				return MajorOlder
 			}
-			if i == 1 && arel[0] == 0 {
-				return MajorOlder
-			}
+			// minor or patch version difference
 			return Older
 		}
 		if arel[i] > brel[i] {
 			if i == 0 {
+				// major version difference
+				if arel[0] == 1 && brel[0] == 0 {
+					// special case, v0.x is equivalent in majorness to v1.x.
+					return Newer
+				}
 				return MajorNewer
 			}
-			if i == 1 && arel[0] == 0 {
-				return MajorNewer
-			}
+			// minor or patch version difference
 			return Newer
 		}
 	}

lib/upgrade/upgrade_test.go

@@ -20,19 +20,21 @@ var versions = []struct {
 	{"0.1.2", "0.1.2", Equal},
 	{"0.1.3", "0.1.2", Newer},
 	{"0.1.1", "0.1.2", Older},
-	{"0.3.0", "0.1.2", MajorNewer},
-	{"0.0.9", "0.1.2", MajorOlder},
+	{"0.3.0", "0.1.2", Newer},
+	{"0.0.9", "0.1.2", Older},
 	{"1.3.0", "1.1.2", Newer},
 	{"1.0.9", "1.1.2", Older},
 	{"2.3.0", "1.1.2", MajorNewer},
 	{"1.0.9", "2.1.2", MajorOlder},
-	{"1.1.2", "0.1.2", MajorNewer},
-	{"0.1.2", "1.1.2", MajorOlder},
+	{"1.1.2", "0.1.2", Newer},
+	{"0.1.2", "1.1.2", Older},
+	{"2.1.2", "0.1.2", MajorNewer},
+	{"0.1.2", "2.1.2", MajorOlder},
 	{"0.1.10", "0.1.9", Newer},
-	{"0.10.0", "0.2.0", MajorNewer},
+	{"0.10.0", "0.2.0", Newer},
 	{"30.10.0", "4.9.0", MajorNewer},
 	{"0.9.0-beta7", "0.9.0-beta6", Newer},
-	{"0.9.0-beta7", "1.0.0-alpha", MajorOlder},
+	{"0.9.0-beta7", "1.0.0-alpha", Older},
 	{"1.0.0-alpha", "1.0.0-alpha.1", Older},
 	{"1.0.0-alpha.1", "1.0.0-alpha.beta", Older},
 	{"1.0.0-alpha.beta", "1.0.0-beta", Older},
@@ -73,6 +75,8 @@ func TestSelectedRelease(t *testing.T) {
 	}{
 		// Within the same "major" (minor, in this case) select the newest
 		{"v0.12.24", false, []string{"v0.12.23", "v0.12.24", "v0.12.25", "v0.12.26"}, "v0.12.26"},
+		{"v0.12.24", false, []string{"v0.12.23", "v0.12.24", "v0.12.25", "v0.13.0"}, "v0.13.0"},
+		{"v0.12.24", false, []string{"v0.12.23", "v0.12.24", "v0.12.25", "v1.0.0"}, "v1.0.0"},
 		// Do no select beta versions when we are not allowed to
 		{"v0.12.24", false, []string{"v0.12.26", "v0.12.27-beta.42"}, "v0.12.26"},
 		{"v0.12.24-beta.0", false, []string{"v0.12.26", "v0.12.27-beta.42"}, "v0.12.26"},
@@ -80,7 +84,7 @@ func TestSelectedRelease(t *testing.T) {
 		{"v0.12.24", true, []string{"v0.12.26", "v0.12.27-beta.42"}, "v0.12.27-beta.42"},
 		{"v0.12.24-beta.0", true, []string{"v0.12.26", "v0.12.27-beta.42"}, "v0.12.27-beta.42"},
 		// Select the best within the current major when there is a minor upgrade available
-		{"v0.12.24", false, []string{"v0.12.23", "v0.12.24", "v0.12.25", "v0.13.0"}, "v0.12.25"},
+		{"v0.12.24", false, []string{"v1.12.23", "v1.12.24", "v1.14.2", "v2.0.0"}, "v1.14.2"},
 		{"v1.12.24", false, []string{"v1.12.23", "v1.12.24", "v1.14.2", "v2.0.0"}, "v1.14.2"},
 		// Select the next major when we are at the best minor
 		{"v0.12.25", true, []string{"v0.12.23", "v0.12.24", "v0.12.25", "v0.13.0"}, "v0.13.0"},

lib/versioner/external.go

@@ -41,13 +41,16 @@ func NewExternal(folderID, folderPath string, params map[string]string) Versione
 // Archive moves the named file away to a version archive. If this function
 // returns nil, the named file does not exist any more (has been archived).
 func (v External) Archive(filePath string) error {
-	_, err := osutil.Lstat(filePath)
+	info, err := osutil.Lstat(filePath)
 	if os.IsNotExist(err) {
 		l.Debugln("not archiving nonexistent file", filePath)
 		return nil
 	} else if err != nil {
 		return err
 	}
+	if info.Mode()&os.ModeSymlink != 0 {
+		panic("bug: attempting to version a symlink")
+	}
 
 	l.Debugln("archiving", filePath)
 

lib/versioner/simple.go

@@ -50,6 +50,9 @@ func (v Simple) Archive(filePath string) error {
 	} else if err != nil {
 		return err
 	}
+	if fileInfo.Mode()&os.ModeSymlink != 0 {
+		panic("bug: attempting to version a symlink")
+	}
 
 	versionsDir := filepath.Join(v.folderPath, ".stversions")
 	_, err = os.Stat(versionsDir)

lib/versioner/staggered.go

@@ -51,11 +51,14 @@ func NewStaggered(folderID, folderPath string, params map[string]string) Version
 	// Use custom path if set, otherwise .stversions in folderPath
 	var versionsDir string
 	if params["versionsPath"] == "" {
-		l.Debugln("using default dir .stversions")
 		versionsDir = filepath.Join(folderPath, ".stversions")
-	} else {
+		l.Debugln("using default dir .stversions")
+	} else if filepath.IsAbs(params["versionsPath"]) {
 		l.Debugln("using dir", params["versionsPath"])
 		versionsDir = params["versionsPath"]
+	} else {
+		versionsDir = filepath.Join(folderPath, params["versionsPath"])
+		l.Debugln("using dir", versionsDir)
 	}
 
 	s := &Staggered{
@@ -241,13 +244,16 @@ func (v *Staggered) Archive(filePath string) error {
 	v.mutex.Lock()
 	defer v.mutex.Unlock()
 
-	_, err := osutil.Lstat(filePath)
+	info, err := osutil.Lstat(filePath)
 	if os.IsNotExist(err) {
 		l.Debugln("not archiving nonexistent file", filePath)
 		return nil
 	} else if err != nil {
 		return err
 	}
+	if info.Mode()&os.ModeSymlink != 0 {
+		panic("bug: attempting to version a symlink")
+	}
 
 	if _, err := os.Stat(v.versionsPath); err != nil {
 		if os.IsNotExist(err) {

lib/versioner/trashcan.go

@@ -44,13 +44,16 @@ func NewTrashcan(folderID, folderPath string, params map[string]string) Versione
 // Archive moves the named file away to a version archive. If this function
 // returns nil, the named file does not exist any more (has been archived).
 func (t *Trashcan) Archive(filePath string) error {
-	_, err := osutil.Lstat(filePath)
+	info, err := osutil.Lstat(filePath)
 	if os.IsNotExist(err) {
 		l.Debugln("not archiving nonexistent file", filePath)
 		return nil
 	} else if err != nil {
 		return err
 	}
+	if info.Mode()&os.ModeSymlink != 0 {
+		panic("bug: attempting to version a symlink")
+	}
 
 	versionsDir := filepath.Join(t.folderPath, ".stversions")
 	if _, err := os.Stat(versionsDir); err != nil {

man/stdiscosrv.1

@@ -1,6 +1,6 @@
 .\" Man page generated from reStructuredText.
 .
-.TH "STDISCOSRV" "1" "May 17, 2017" "v0.14" "Syncthing"
+.TH "STDISCOSRV" "1" "July 03, 2017" "v0.14" "Syncthing"
 .SH NAME
 stdiscosrv \- Syncthing Discovery Server
 .

man/strelaysrv.1

@@ -1,6 +1,6 @@
 .\" Man page generated from reStructuredText.
 .
-.TH "STRELAYSRV" "1" "May 17, 2017" "v0.14" "Syncthing"
+.TH "STRELAYSRV" "1" "July 03, 2017" "v0.14" "Syncthing"
 .SH NAME
 strelaysrv \- Syncthing Relay Server
 .

man/syncthing-bep.7

@@ -1,6 +1,6 @@
 .\" Man page generated from reStructuredText.
 .
-.TH "SYNCTHING-BEP" "7" "May 17, 2017" "v0.14" "Syncthing"
+.TH "SYNCTHING-BEP" "7" "July 03, 2017" "v0.14" "Syncthing"
 .SH NAME
 syncthing-bep \- Block Exchange Protocol v1
 .

man/syncthing-config.5

@@ -1,6 +1,6 @@
 .\" Man page generated from reStructuredText.
 .
-.TH "SYNCTHING-CONFIG" "5" "May 17, 2017" "v0.14" "Syncthing"
+.TH "SYNCTHING-CONFIG" "5" "July 03, 2017" "v0.14" "Syncthing"
 .SH NAME
 syncthing-config \- Syncthing Configuration
 .
@@ -84,7 +84,7 @@ The following shows an example of the default configuration file (IDs will diffe
 <configuration version="14">
     <folder id="zj2AA\-q55a7" label="Default Folder (zj2AA\-q55a7)" path="/Users/jb/Sync/" type="readwrite" rescanIntervalS="60" ignorePerms="false" autoNormalize="true">
         <device id="3LT2GA5\-CQI4XJM\-WTZ264P\-MLOGMHL\-MCRLDNT\-MZV4RD3\-KA745CL\-OGAERQZ"></device>
-        <minDiskFreePct>1</minDiskFreePct>
+        <minDiskFree unit="%">1</minDiskFree>
         <versioning></versioning>
         <copiers>0</copiers>
         <pullers>0</pullers>
@@ -135,7 +135,7 @@ The following shows an example of the default configuration file (IDs will diffe
         <cacheIgnoredFiles>false</cacheIgnoredFiles>
         <progressUpdateIntervalS>5</progressUpdateIntervalS>
         <limitBandwidthInLan>false</limitBandwidthInLan>
-        <minHomeDiskFreePct>1</minHomeDiskFreePct>
+        <minHomeDiskFree unit="%">1</minHomeDiskFree>
         <releasesURL>https://api.github.com/repos/syncthing/syncthing/releases?per_page=30</releasesURL>
         <overwriteRemoteDeviceNamesOnConnect>false</overwriteRemoteDeviceNamesOnConnect>
         <tempIndexMinBlocks>10</tempIndexMinBlocks>
@@ -162,7 +162,7 @@ migration from previous formats.
 .ft C
 <folder id="zj2AA\-q55a7" label="Default Folder (zj2AA\-q55a7)" path="/Users/jb/Sync/" type="readwrite" rescanIntervalS="60" ignorePerms="false" autoNormalize="true" ro="false">
     <device id="3LT2GA5\-CQI4XJM\-WTZ264P\-MLOGMHL\-MCRLDNT\-MZV4RD3\-KA745CL\-OGAERQZ" introducedBy="2CYF2WQ\-AKZO2QZ\-JAKWLYD\-AGHMQUM\-BGXUOIS\-GYILW34\-HJG3DUK\-LRRYQAR"></device>
-    <minDiskFreePct>1</minDiskFreePct>
+    <minDiskFree unit="%">1</minDiskFree>
     <versioning></versioning>
     <copiers>0</copiers>
     <pullers>0</pullers>
@@ -236,10 +236,10 @@ It is customary that the local device ID is included in all folders.
 Syncthing will currently add this automatically if it is not present in
 the configuration file.
 .TP
-.B minDiskFreePct
-The percentage of space that should be available on the disk this folder
-resides. The folder will be stopped when the percentage of free space goes
-below the threshold. Set to zero to disable.
+.B minDiskFree
+The minimum required free space that should be available on the disk this folder
+resides. The folder will be stopped when the value drops below the threshold. Accepted units are
+\fB%\fP, \fBkB\fP, \fBMB\fP, \fBGB\fP and \fBTB\fP\&. Set to zero to disable.
 .TP
 .B versioning
 Specifies a versioning configuration.
@@ -518,7 +518,7 @@ If set, this is the API key that enables usage of the REST interface.
     <cacheIgnoredFiles>false</cacheIgnoredFiles>
     <progressUpdateIntervalS>5</progressUpdateIntervalS>
     <limitBandwidthInLan>false</limitBandwidthInLan>
-    <minHomeDiskFreePct>1</minHomeDiskFreePct>
+    <minHomeDiskFree unit="%">1</minHomeDiskFree>
     <releasesURL>https://api.github.com/repos/syncthing/syncthing/releases?per_page=30</releasesURL>
     <overwriteRemoteDeviceNamesOnConnect>false</overwriteRemoteDeviceNamesOnConnect>
     <tempIndexMinBlocks>10</tempIndexMinBlocks>
@@ -654,9 +654,10 @@ slow response time (slow connection/cpu) and large index exchanges.
 .B pingIdleTimeS
 Ping interval in seconds. Don\(aqt change it unless you feel it\(aqs necessary.
 .TP
-.B minHomeDiskFreePct
-The percentage of space that should be available on the partition holding
-the configuration and index.
+.B minHomeDiskFree
+The minimum required free space that should be available on the the
+partition holding the configuration and index. Accepted units are \fB%\fP, \fBkB\fP,
+\fBMB\fP, \fBGB\fP and \fBTB\fP\&.
 .TP
 .B releasesURL
 The URL from which release information is loaded, for automatic upgrades.
@@ -675,6 +676,10 @@ into account files that have at least this many blocks.
 The following address types are accepted in sync protocol listen addresses:
 .INDENT 0.0
 .TP
+.B Default listen addresses (\fBdefault\fP)
+This is equivalent to \fBtcp://0.0.0.0:22000\fP and
+\fBdynamic+https://relays.syncthing.net/endpoint\fP\&.
+.TP
 .B TCP wildcard and port (\fBtcp://0.0.0.0:22000\fP, \fBtcp://:22000\fP)
 These are equivalent and will result in Syncthing listening on all
 interfaces, IPv4 and IPv6, on the specified port.

man/syncthing-device-ids.7

@@ -1,6 +1,6 @@
 .\" Man page generated from reStructuredText.
 .
-.TH "SYNCTHING-DEVICE-IDS" "7" "May 17, 2017" "v0.14" "Syncthing"
+.TH "SYNCTHING-DEVICE-IDS" "7" "July 03, 2017" "v0.14" "Syncthing"
 .SH NAME
 syncthing-device-ids \- Understanding Device IDs
 .

man/syncthing-event-api.7

@@ -1,6 +1,6 @@
 .\" Man page generated from reStructuredText.
 .
-.TH "SYNCTHING-EVENT-API" "7" "May 17, 2017" "v0.14" "Syncthing"
+.TH "SYNCTHING-EVENT-API" "7" "July 03, 2017" "v0.14" "Syncthing"
 .SH NAME
 syncthing-event-api \- Event API
 .
@@ -37,7 +37,7 @@ core utility towards a GUI.
 .sp
 To receive events, perform a HTTP GET of \fB/rest/events\fP or
 \fB/rest/events/disk\fP\&. The latter returns only local\-change\-detected and
-local\-change\-detected events, the former all other events.
+remote\-change\-detected events, the former all other events.
 .sp
 The optional parameter \fBsince=<lastSeenID>\fP sets the ID of the last event
 you\(aqve already seen. Syncthing returns a JSON encoded array of event objects,

man/syncthing-faq.7

@@ -1,6 +1,6 @@
 .\" Man page generated from reStructuredText.
 .
-.TH "SYNCTHING-FAQ" "7" "May 17, 2017" "v0.14" "Syncthing"
+.TH "SYNCTHING-FAQ" "7" "July 03, 2017" "v0.14" "Syncthing"
 .SH NAME
 syncthing-faq \- Frequently Asked Questions
 .

man/syncthing-globaldisco.7

@@ -1,6 +1,6 @@
 .\" Man page generated from reStructuredText.
 .
-.TH "SYNCTHING-GLOBALDISCO" "7" "May 17, 2017" "v0.14" "Syncthing"
+.TH "SYNCTHING-GLOBALDISCO" "7" "July 03, 2017" "v0.14" "Syncthing"
 .SH NAME
 syncthing-globaldisco \- Global Discovery Protocol v3
 .

man/syncthing-localdisco.7

@@ -1,6 +1,6 @@
 .\" Man page generated from reStructuredText.
 .
-.TH "SYNCTHING-LOCALDISCO" "7" "May 17, 2017" "v0.14" "Syncthing"
+.TH "SYNCTHING-LOCALDISCO" "7" "July 03, 2017" "v0.14" "Syncthing"
 .SH NAME
 syncthing-localdisco \- Local Discovery Protocol v4
 .

man/syncthing-networking.7

@@ -1,6 +1,6 @@
 .\" Man page generated from reStructuredText.
 .
-.TH "SYNCTHING-NETWORKING" "7" "May 17, 2017" "v0.14" "Syncthing"
+.TH "SYNCTHING-NETWORKING" "7" "July 03, 2017" "v0.14" "Syncthing"
 .SH NAME
 syncthing-networking \- Firewall Setup
 .

man/syncthing-relay.7

@@ -1,6 +1,6 @@
 .\" Man page generated from reStructuredText.
 .
-.TH "SYNCTHING-RELAY" "7" "May 17, 2017" "v0.14" "Syncthing"
+.TH "SYNCTHING-RELAY" "7" "July 03, 2017" "v0.14" "Syncthing"
 .SH NAME
 syncthing-relay \- Relay Protocol v1
 .

man/syncthing-rest-api.7

@@ -1,6 +1,6 @@
 .\" Man page generated from reStructuredText.
 .
-.TH "SYNCTHING-REST-API" "7" "May 17, 2017" "v0.14" "Syncthing"
+.TH "SYNCTHING-REST-API" "7" "July 03, 2017" "v0.14" "Syncthing"
 .SH NAME
 syncthing-rest-api \- REST API
 .
@@ -154,7 +154,6 @@ Returns the current configuration.
         "tempIndexMinBlocks": 10
       },
       "ignoredDevices": []
-      "ignoredFolders": []
     }
 }
 .ft P
@@ -886,7 +885,7 @@ core utility towards a GUI.
 .sp
 To receive events, perform a HTTP GET of \fB/rest/events\fP or
 \fB/rest/events/disk\fP\&. The latter returns only local\-change\-detected and
-local\-change\-detected events, the former all other events.
+remote\-change\-detected events, the former all other events.
 .sp
 The optional parameter \fBsince=<lastSeenID>\fP sets the ID of the last event
 you\(aqve already seen. Syncthing returns a JSON encoded array of event objects,

man/syncthing-security.7

@@ -1,6 +1,6 @@
 .\" Man page generated from reStructuredText.
 .
-.TH "SYNCTHING-SECURITY" "7" "May 17, 2017" "v0.14" "Syncthing"
+.TH "SYNCTHING-SECURITY" "7" "July 03, 2017" "v0.14" "Syncthing"
 .SH NAME
 syncthing-security \- Security Principles
 .

man/syncthing-stignore.5

@@ -1,6 +1,6 @@
 .\" Man page generated from reStructuredText.
 .
-.TH "SYNCTHING-STIGNORE" "5" "May 17, 2017" "v0.14" "Syncthing"
+.TH "SYNCTHING-STIGNORE" "5" "July 03, 2017" "v0.14" "Syncthing"
 .SH NAME
 syncthing-stignore \- Prevent files from being synchronized to other nodes
 .

man/syncthing-versioning.7

@@ -1,6 +1,6 @@
 .\" Man page generated from reStructuredText.
 .
-.TH "SYNCTHING-VERSIONING" "7" "May 17, 2017" "v0.14" "Syncthing"
+.TH "SYNCTHING-VERSIONING" "7" "July 03, 2017" "v0.14" "Syncthing"
 .SH NAME
 syncthing-versioning \- Keep automatic backups of deleted files by other nodes
 .

man/syncthing.1

@@ -1,6 +1,6 @@
 .\" Man page generated from reStructuredText.
 .
-.TH "SYNCTHING" "1" "May 17, 2017" "v0.14" "Syncthing"
+.TH "SYNCTHING" "1" "July 03, 2017" "v0.14" "Syncthing"
 .SH NAME
 syncthing \- Syncthing
 .