gui: Don't set default path editing existing folders without label (fixes #4297 )

GitHub-Pull-Request: https://github.com/syncthing/syncthing/pull/4298 LGTM: calmh
lib/model: Remove ineffective symlink recovery attempt
2026-01-04 11:59:12 -05:00 · 2017-08-10 15:31:25 +00:00 · 2017-08-08 15:30:28 +02:00 · 2017-08-08 13:13:08 +00:00 · 2017-08-08 08:05:24 +02:00 · 2017-08-07 07:57:10 +02:00
1927 changed files with 457915 additions and 129942 deletions
--- a/16
+++ b/16
@@ -6,7 +6,8 @@
 # The NICKS list is auto generated from this file.

 Aaron Bieber (qbit) <qbit@deftly.net>
-Adam Piggott (simplypeachy) <aD@simplypeachy.co.uk> <simplypeachy@users.noreply.github.com>
+Adam Piggott (ProactiveServices) <aD@simplypeachy.co.uk> <simplypeachy@users.noreply.github.com> <ProactiveServices@users.noreply.github.com>
+Adel Qalieh (adelq) <aqalieh95@gmail.com> <adelq@users.noreply.github.com>
 Alessandro G. (alessandro.g89) <alessandro.g89@gmail.com>
 Alexander Graf (alex2108) <register-github@alex-graf.de>
 Alexandre Viau (aviau) <alexandre@alexandreviau.net> <aviau@debian.org>
@@ -20,6 +21,7 @@ Audrius Butkevicius (AudriusButkevicius) <audrius.butkevicius@gmail.com>
 Bart De Vries (mogwa1) <devriesb@gmail.com>
 Ben Curthoys (bencurthoys) <ben@bencurthoys.com>
 Ben Schulz (uok) <ueomkail@gmail.com> <uok@users.noreply.github.com>
+Ben Shepherd (benshep) <bjashepherd@gmail.com>
 Ben Sidhom (bsidhom) <bsidhom@gmail.com>
 Benny Ng (tpng) <benny.tpng@gmail.com>
 Brandon Philips (philips) <brandon@ifup.org>
@@ -35,6 +37,7 @@ Colin Kennedy (moshen) <moshen.colin@gmail.com>
 Daniel Bergmann (brgmnn) <dan.arne.bergmann@gmail.com> <brgmnn@users.noreply.github.com>
 Daniel Harte (norgeous) <daniel@harte.me> <daniel@danielharte.co.uk> <norgeous@users.noreply.github.com>
 Daniel Martí (mvdan) <mvdan@mvdan.cc>
+Darshil Chanpura (dtchanpura) <dtchanpura@gmail.com> <dcprime314@gmail.com>
 David Rimmer (dinosore) <dinosore@dbrsoftware.co.uk>
 Denis A. (dva) <denisva@gmail.com>
 Dennis Wilson (snnd) <dw@risu.io>
@@ -55,17 +58,21 @@ Jake Peterson (acogdev) <jake@acogdev.com>
 Jakob Borg (calmh) <jakob@nym.se> <jakob@kastelo.net>
 James Patterson (jpjp) <jamespatterson@operamail.com> <jpjp@users.noreply.github.com>
 Jaroslav Malec (dzarda) <dzardacz@gmail.com>
+Jaya Chithra (jayachithra) <s.k.jayachithra@gmail.com>
 Jens Diemer (jedie) <github.com@jensdiemer.de> <git@jensdiemer.de>
 Jochen Voss (seehuhn) <voss@seehuhn.de>
 Johan Vromans (sciurius) <jvromans@squirrel.nl>
+Jose Manuel Delicado (jmdaweb) <jmdaweb@hotmail.com> <jmdaweb@users.noreply.github.com>
 Karol Różycki (krozycki) <rozycki.karol@gmail.com>
 Kelong Cong (kc1212) <kc04bc@gmx.com> <kc1212@users.noreply.github.com>
 Ken'ichi Kamada (kamadak) <kamada@nanohz.org>
 Kevin Allen (ironmig) <kma1660@gmail.com>
 Kevin White, Jr. (kwhite17) <kevinwhite1710@gmail.com>
+Kurt Fitzner (Kudalufi) <kurt@va1der.ca> <kurt.fitzner@gmail.com>
 Lars K.W. Gohlke (lkwg82) <lkwg82@gmx.de>
 Laurent Etiemble (letiemble) <laurent.etiemble@gmail.com> <laurent.etiemble@monobjc.net>
 Leo Arias (elopio) <yo@elopio.net>
+Liu Siyuan (liusy182) <liusy182@gmail.com> <liusy182@hotmail.com>
 Lode Hoste (Zillode) <zillode@zillode.be>
 Lord Landon Agahnim (LordLandon) <lordlandon@gmail.com>
 Majed Abdulaziz (majedev) <majed.alhajry@gmail.com>
@@ -80,18 +87,23 @@ Michael Jephcote (Rewt0r) <rewt0r@gmx.com> <Rewt0r@users.noreply.github.com>
 Michael Ploujnikov (plouj) <ploujj@gmail.com>
 Michael Tilli (pyfisch) <pyfisch@gmail.com>
 Nate Morrison (nrm21) <natemorrison@gmail.com>
+Niels Peter Roest (Niller303) <nielsproest@hotmail.com> <seje.niels@hotmail.com>
 Pascal Jungblut (pascalj) <github@pascalj.com> <mail@pascal-jungblut.com>
 Peter Hoeg (peterhoeg) <peter@speartail.com>
 Philippe Schommers (filoozoom) <philippe@schommers.be>
 Phill Luby (pluby) <phill.luby@newredo.com>
 Piotr Bejda (piobpl) <piotrb10@gmail.com>
+Robert Carosi (nov1n) <robert@carosi.nl>
 Roman Zaynetdinov (zaynetro) <romanznet@gmail.com>
+Ross Smith II (rasa) <ross@smithii.com>
 Ryan Sullivan (KayoticSully) <kayoticsully@gmail.com>
+Sacheendra Talluri (sacheendra) <sacheendra.t@gmail.com>
 Scott Klupfel (kluppy) <kluppy@going2blue.com>
 Sergey Mishin (ralder) <ralder@yandex.ru>
 Simon Frei (imsodin) <freisim93@gmail.com>
 Stefan Kuntz (Stefan-Code) <stefan.github@gmail.com> <Stefan.github@gmail.com>
 Stefan Tatschner (rumpelsepp) <stefan@sevenbyte.org> <rumpelsepp@sevenbyte.org>
+Suhas Gundimeda (snugghash) <suhas.gundimeda@gmail.com> <snugghash@gmail.com>
 Tim Abell (timabell) <tim@timwise.co.uk>
 Tim Howes (timhowes) <timhowes@berkeley.edu>
 Tobias Nygren (tnn2) <tnn@nygren.pp.se>
@@ -103,6 +115,6 @@ Veeti Paananen (veeti) <veeti.paananen@rojekti.fi>
 Victor Buinsky (buinsky) <vix_booja@tut.by>
 Vil Brekin (Vilbrekin) <vilbrekin@gmail.com>
 William A. Kennington III (wkennington) <william@wkennington.com>
-Wulf Weich (wweich) <wweich@users.noreply.github.com> <wweich@gmx.de>
+Wulf Weich (wweich) <wweich@users.noreply.github.com> <wweich@gmx.de> <wulf@weich-kr.de>
 Xavier O. (damajor) <damajor@gmail.com>
 Yannic A. (eipiminus1) <eipiminusone+github@gmail.com> <eipiminus1@users.noreply.github.com>
--- a/GOALS.md
+++ b/GOALS.md
@@ -0,0 +1,83 @@
+# The Syncthing Goals
+
+Syncthing is a **continuous file synchronization program**. It synchronizes
+files between two or more computers. We strive to fulfill the goals below.
+The goals are listed in order of importance, the most important one being
+the first.
+
+> "Syncing files" here is precise. It means we specifically exclude things
+> that are not files - calendar items, instant messages, and so on. If those
+> are in fact stored as files on disk, they can of course be synced as
+> files.
+
+Syncthing should be:
+
+### 1. Safe From Data Loss
+
+Protecting the user's data is paramount. We take every reasonable precaution
+to avoid corrupting the user's files.
+
+> This is the overriding goal, without which synchronizing files becomes
+> pointless. This means that we do not make unsafe trade offs for the sake
+> of performance or, in some cases, even usability.
+
+### 2. Secure Against Attackers
+
+Again, protecting the user's data is paramount. Regardless of our other
+goals we must never allow the user's data to be susceptible to eavesdropping
+or modification by unauthorized parties.
+
+> This should be understood in context. It is not necessarily reasonable to
+> expect Syncthing to be resistant against well equipped state level
+> attackers. We will however do our best. Note also that this is different
+> from anonymity which is not, currently, a goal.
+
+### 3. Easy to Use
+
+Syncthing should be approachable, understandable and inclusive.
+
+> Complex concepts and maths form the base of Synchting's functionality.
+> This should nonetheless be abstracted or hidden to a degree where
+> Syncthing is usable by the general public.
+
+### 4. Automatic
+
+User interaction should be required only when absolutely necessary.
+
+> Specifically this means that changes to files are picked up without
+> prompting, conflicts are resolved without prompting and connections are
+> maintained without prompting. We only prompt the user when it is required
+> to fulfill one of the (overriding) Secure, Safe or Easy goals.
+
+### 5. Universally Available
+
+Syncthing should run on every common computer. We are mindful that the
+latest technology is not always available to any given individual.
+
+> Computers include desktops, laptops, servers, virtual machines, small
+> general purpose computers such as Raspberry Pis and, *where possible*,
+> tablets and phones. NAS appliances, toasters, cars, firearms, thermostats
+> and so on may include computing capabitilies but it is not our goal for
+> Syncthing to run smoothly on these devices.
+
+### 6. For Individuals
+
+Syncthing is primarily about empowering the individual user with safe,
+secure and easy to use file synchronization.
+
+> We acknowledge that it's also useful in an enterprise setting and include
+> functionality to support that. If this is in conflict with the
+> requirements of the individual, those will however take priority.
+
+### 7. Everything Else
+
+There are many things we care about that don't make it on to the list. It is
+fine to optimize for these values as well, as long as they are not in
+conflict with the stated goals above.
+
+> For example, performance is a thing we care about. We just don't care more
+> about it than safety, security, etc. Maintainability of the code base and
+> providing entertainment value for the maintainers are also things that
+> matter. It is understood that there are aspects of Syncthing that are
+> suboptimal or even in opposition with the goals above. However, we
+> continuously strive to align Syncthing more and more with these goals.
--- a/2
+++ b/2
@@ -357,7 +357,7 @@ Exhibit A - Source Code Form License Notice

  This Source Code Form is subject to the terms of the Mozilla Public
  License, v. 2.0. If a copy of the MPL was not distributed with this
-  file, You can obtain one at http://mozilla.org/MPL/2.0/.
+  file, You can obtain one at https://mozilla.org/MPL/2.0/.

 If it is not possible or desirable to put the notice in a particular
 file, then You may include the notice in a location (such as a LICENSE
--- a/25
+++ b/25
@@ -4,6 +4,8 @@
 0x010C <antoine.lamielle@0x010c.fr>
 0x010C <gh@0x010c.fr>
 acogdev <jake@acogdev.com>
+adelq <aqalieh95@gmail.com>
+adelq <adelq@users.noreply.github.com>
 alessandro.g89 <alessandro.g89@gmail.com>
 alex2108 <register-github@alex-graf.de>
 andersonvom <andersonvom@gmail.com>
@@ -13,6 +15,7 @@ AudriusButkevicius <audrius.butkevicius@gmail.com>
 aviau <alexandre@alexandreviau.net>
 aviau <aviau@debian.org>
 bencurthoys <ben@bencurthoys.com>
+benshep <bjashepherd@gmail.com>
 bigbear2nd <bigbear2nd@gmail.com>
 brbecker <brbecker@gmail.com>
 brendanlong <self@brendanlong.com>
@@ -33,6 +36,8 @@ ceh <emil@hessman.se>
 cqcallaw <enlightened.despot@gmail.com>
 damajor <damajor@gmail.com>
 dinosore <dinosore@dbrsoftware.co.uk>
+dtchanpura <dtchanpura@gmail.com>
+dtchanpura <dcprime314@gmail.com>
 dva <denisva@gmail.com>
 dzarda <dzardacz@gmail.com>
 eipiminus1 <eipiminusone+github@gmail.com>
@@ -48,9 +53,12 @@ hadogenes <szafar@linux.pl>
 imsodin <freisim93@gmail.com>
 ironmig <kma1660@gmail.com>
 jarlebring <jarlebring@gmail.com>
+jayachithra <s.k.jayachithra@gmail.com>
 jedie <github.com@jensdiemer.de>
 jedie <git@jensdiemer.de>
 jgke <jgke@jgke.fi>
+jmdaweb <jmdaweb@hotmail.com>
+jmdaweb <jmdaweb@users.noreply.github.com>
 jpjp <jamespatterson@operamail.com>
 jpjp <jpjp@users.noreply.github.com>
 kamadak <kamada@nanohz.org>
@@ -63,9 +71,13 @@ kozec <kozec@kozec.com>
 kralo <max.schulze@online.de>
 kralo <kralo@users.noreply.github.com>
 krozycki <rozycki.karol@gmail.com>
+Kudalufi <kurt@va1der.ca>
+Kudalufi <kurt.fitzner@gmail.com>
 kwhite17 <kevinwhite1710@gmail.com>
 letiemble <laurent.etiemble@gmail.com>
 letiemble <laurent.etiemble@monobjc.net>
+liusy182 <liusy182@gmail.com>
+liusy182 <liusy182@hotmail.com>
 lkwg82 <lkwg82@gmx.de>
 LordLandon <lordlandon@gmail.com>
 majedev <majed.alhajry@gmail.com>
@@ -78,9 +90,12 @@ moshen <moshen.colin@gmail.com>
 Moter8 <moter8@gmail.com>
 mpx <mark@kyne.com.au>
 mvdan <mvdan@mvdan.cc>
+Niller303 <nielsproest@hotmail.com>
+Niller303 <seje.niels@hotmail.com>
 norgeous <daniel@harte.me>
 norgeous <daniel@danielharte.co.uk>
 norgeous <norgeous@users.noreply.github.com>
+nov1n <robert@carosi.nl>
 nrm21 <natemorrison@gmail.com>
 Nutomic <me@nutomic.com>
 pascalj <github@pascalj.com>
@@ -90,20 +105,25 @@ philips <brandon@ifup.org>
 piobpl <piotrb10@gmail.com>
 plouj <ploujj@gmail.com>
 pluby <phill.luby@newredo.com>
+ProactiveServices <aD@simplypeachy.co.uk>
+ProactiveServices <simplypeachy@users.noreply.github.com>
+ProactiveServices <ProactiveServices@users.noreply.github.com>
 pyfisch <pyfisch@gmail.com>
 qbit <qbit@deftly.net>
 ralder <ralder@yandex.ru>
+rasa <ross@smithii.com>
 Rewt0r <rewt0r@gmx.com>
 Rewt0r <Rewt0r@users.noreply.github.com>
 rumpelsepp <stefan@sevenbyte.org>
 rumpelsepp <rumpelsepp@sevenbyte.org>
+sacheendra <sacheendra.t@gmail.com>
 scienmind <scintertech@cryptolab.net>
 sciurius <jvromans@squirrel.nl>
 seehuhn <voss@seehuhn.de>
-simplypeachy <aD@simplypeachy.co.uk>
-simplypeachy <simplypeachy@users.noreply.github.com>
 Smiley73 <heiko@zuerker.org>
 snnd <dw@risu.io>
+snugghash <suhas.gundimeda@gmail.com>
+snugghash <snugghash@gmail.com>
 Stefan-Code <stefan.github@gmail.com>
 Stefan-Code <Stefan.github@gmail.com>
 timabell <tim@timwise.co.uk>
@@ -122,6 +142,7 @@ wkennington <william@wkennington.com>
 WSGCSysadmin <e.meitner@willystreet.coop>
 wweich <wweich@users.noreply.github.com>
 wweich <wweich@gmx.de>
+wweich <wulf@weich-kr.de>
 xduugu <cedric@gmx.ca>
 zaynetro <romanznet@gmail.com>
 Zillode <zillode@zillode.be>
--- a/README.md
+++ b/README.md
@@ -1,24 +1,60 @@
-# Syncthing
+[![Syncthing][14]][15]

-[![Latest Build (Official)](https://img.shields.io/jenkins/s/http/build.syncthing.net/syncthing.svg?style=flat-square&label=unix%20build)](http://build.syncthing.net/job/syncthing/lastBuild/)
-[![API Documentation](https://img.shields.io/badge/api-Godoc-blue.svg?style=flat-square)](http://godoc.org/github.com/syncthing/syncthing)
+---
+
+[![Latest Linux & Cross Build](https://img.shields.io/jenkins/s/http/build.syncthing.net/syncthing.svg?style=flat-square&label=linux+%26+cross)](https://build.syncthing.net/job/syncthing/lastBuild/)
+[![Latest Windows Build](https://img.shields.io/jenkins/s/http/build.syncthing.net/syncthing-windows.svg?style=flat-square&label=windows)](https://build.syncthing.net/job/syncthing/lastBuild/)
+[![Latest Mac Build](https://img.shields.io/jenkins/s/http/build.syncthing.net/syncthing-mac.svg?style=flat-square&label=mac)](https://build.syncthing.net/job/syncthing/lastBuild/)
+[![Latest Solaris Build](https://img.shields.io/jenkins/s/http/build.syncthing.net/syncthing-solaris.svg?style=flat-square&label=solaris)](https://build.syncthing.net/job/syncthing/lastBuild/)
+[![API Documentation](https://img.shields.io/badge/api-Godoc-blue.svg?style=flat-square)](https://godoc.org/github.com/syncthing/syncthing)
 [![MPLv2 License](https://img.shields.io/badge/license-MPLv2-blue.svg?style=flat-square)](https://www.mozilla.org/MPL/2.0/)
 [![CII Best Practices](https://bestpractices.coreinfrastructure.org/projects/88/badge)](https://bestpractices.coreinfrastructure.org/projects/88)
+[![Go Report Card](https://goreportcard.com/badge/github.com/syncthing/syncthing)](https://goreportcard.com/report/github.com/syncthing/syncthing)

-This is the Syncthing project which pursues the following goals:
+## Goals

- 1. Define a protocol for synchronization of a folder between a number of
-    collaborating devices. This protocol should be well defined, unambiguous,
-    easily understood, free to use, efficient, secure and language neutral.
-    This is called the [Block Exchange Protocol][1].
+Syncthing is a **continuous file synchronization program**. It synchronizes
+files between two or more computers. We strive to fulfill the goals below.
+The goals are listed in order of importance, the most important one being
+the first. This is the summary version of the goal list - for more
+commentary, see the full [Goals document][13].

- 2. Provide the reference implementation to demonstrate the usability of
-    said protocol. This is the `syncthing` utility. We hope that
-    alternative, compatible implementations of the protocol will arise.
+Syncthing should be:

-The two are evolving together; the protocol is not to be considered
-stable until Syncthing 1.0 is released, at which point it is locked down
-for incompatible changes.
+1. Safe From Data Loss
+
+   Protecting the user's data is paramount. We take every reasonable
+   precaution to avoid corrupting the user's files.
+
+2. Secure Against Attackers
+
+   Again, protecting the user's data is paramount. Regardless of our other
+   goals we must never allow the user's data to be susceptible to
+   eavesdropping or modification by unauthorized parties.
+
+3. Easy to Use
+
+   Syncthing should be approachable, understandable and inclusive.
+
+4. Automatic
+
+   User interaction should be required only when absolutely necessary.
+
+5. Universally Available
+
+   Syncthing should run on every common computer. We are mindful that the
+   latest technology is not always available to any given individual.
+
+6. For Individuals
+
+   Syncthing is primarily about empowering the individual user with safe,
+   secure and easy to use file synchronization.
+
+7. Everything Else
+
+   There are many things we care about that don't make it on to the list. It
+   is fine to optimize for these values, as long as they are not in conflict
+   with the stated goals above.

 ## Getting Started

@@ -64,7 +100,7 @@ All code is licensed under the [MPLv2 License][7].
 [1]: https://docs.syncthing.net/specs/bep-v1.html
 [2]: https://docs.syncthing.net/intro/getting-started.html
 [3]: https://github.com/syncthing/syncthing/blob/master/etc
-[4]: http://www.freenode.net/irc_servers.shtml
+[4]: https://www.freenode.net/
 [5]: https://docs.syncthing.net/dev/building.html
 [6]: https://docs.syncthing.net/
 [7]: https://github.com/syncthing/syncthing/blob/master/LICENSE
@@ -73,3 +109,6 @@ All code is licensed under the [MPLv2 License][7].
 [10]: https://github.com/syncthing/syncthing/issues
 [11]: https://docs.syncthing.net/users/contrib.html#gui-wrappers
 [12]: https://www.bountysource.com/teams/syncthing/issues
+[13]: https://github.com/syncthing/syncthing/blob/master/GOALS.md
+[14]: assets/logo-text-128.png
+[15]: https://syncthing.net/ 
--- a/assets/syncthing_folder_icon.icns
+++ b/assets/syncthing_folder_icon.icns
--- a/build.go
+++ b/build.go
@@ -2,7 +2,7 @@
 //
 // This Source Code Form is subject to the terms of the Mozilla Public
 // License, v. 2.0. If a copy of the MPL was not distributed with this file,
-// You can obtain one at http://mozilla.org/MPL/2.0/.
+// You can obtain one at https://mozilla.org/MPL/2.0/.

 // +build ignore

@@ -12,7 +12,9 @@ import (
 	"archive/tar"
 	"archive/zip"
 	"bytes"
+	"compress/flate"
 	"compress/gzip"
+	"crypto/sha256"
 	"errors"
 	"flag"
 	"fmt"
@@ -32,18 +34,25 @@ import (
 )

 var (
-	versionRe = regexp.MustCompile(`-[0-9]{1,3}-g[0-9a-f]{5,10}`)
-	goarch    string
-	goos      string
-	noupgrade bool
-	version   string
-	goVersion float64
-	race      bool
-	debug     = os.Getenv("BUILDDEBUG") != ""
+	versionRe     = regexp.MustCompile(`-[0-9]{1,3}-g[0-9a-f]{5,10}`)
+	goarch        string
+	goos          string
+	noupgrade     bool
+	version       string
+	goVersion     float64
+	race          bool
+	debug         = os.Getenv("BUILDDEBUG") != ""
+	noBuildGopath bool
+	extraTags     string
+	installSuffix string
 )

 type target struct {
 	name              string
+	debname           string
+	debdeps           []string
+	debpost           string
+	description       string
 	buildPkg          string
 	binaryName        string
 	archiveFiles      []archiveFile
@@ -61,14 +70,18 @@ var targets = map[string]target{
 	"all": {
 		// Only valid for the "build" and "install" commands as it lacks all
 		// the archive creation stuff.
-		buildPkg: "./cmd/...",
+		buildPkg: "github.com/syncthing/syncthing/cmd/...",
 		tags:     []string{"purego"},
 	},
 	"syncthing": {
 		// The default target for "build", "install", "tar", "zip", "deb", etc.
-		name:       "syncthing",
-		buildPkg:   "./cmd/syncthing",
-		binaryName: "syncthing", // .exe will be added automatically for Windows builds
+		name:        "syncthing",
+		debname:     "syncthing",
+		debdeps:     []string{"libc6", "procps"},
+		debpost:     "script/post-upgrade",
+		description: "Open Source Continuous File Synchronization",
+		buildPkg:    "github.com/syncthing/syncthing/cmd/syncthing",
+		binaryName:  "syncthing", // .exe will be added automatically for Windows builds
 		archiveFiles: []archiveFile{
 			{src: "{{binary}}", dst: "{{binary}}", perm: 0755},
 			{src: "README.md", dst: "README.txt", perm: 0644},
@@ -98,9 +111,12 @@ var targets = map[string]target{
 		},
 	},
 	"stdiscosrv": {
-		name:       "stdiscosrv",
-		buildPkg:   "./cmd/stdiscosrv",
-		binaryName: "stdiscosrv", // .exe will be added automatically for Windows builds
+		name:        "stdiscosrv",
+		debname:     "syncthing-discosrv",
+		debdeps:     []string{"libc6"},
+		description: "Syncthing Discovery Server",
+		buildPkg:    "github.com/syncthing/syncthing/cmd/stdiscosrv",
+		binaryName:  "stdiscosrv", // .exe will be added automatically for Windows builds
 		archiveFiles: []archiveFile{
 			{src: "{{binary}}", dst: "{{binary}}", perm: 0755},
 			{src: "cmd/stdiscosrv/README.md", dst: "README.txt", perm: 0644},
@@ -109,17 +125,20 @@ var targets = map[string]target{
 		},
 		installationFiles: []archiveFile{
 			{src: "{{binary}}", dst: "deb/usr/bin/{{binary}}", perm: 0755},
-			{src: "cmd/stdiscosrv/README.md", dst: "deb/usr/share/doc/stdiscosrv/README.txt", perm: 0644},
-			{src: "cmd/stdiscosrv/LICENSE", dst: "deb/usr/share/doc/stdiscosrv/LICENSE.txt", perm: 0644},
-			{src: "AUTHORS", dst: "deb/usr/share/doc/stdiscosrv/AUTHORS.txt", perm: 0644},
+			{src: "cmd/stdiscosrv/README.md", dst: "deb/usr/share/doc/syncthing-discosrv/README.txt", perm: 0644},
+			{src: "cmd/stdiscosrv/LICENSE", dst: "deb/usr/share/doc/syncthing-discosrv/LICENSE.txt", perm: 0644},
+			{src: "AUTHORS", dst: "deb/usr/share/doc/syncthing-discosrv/AUTHORS.txt", perm: 0644},
 			{src: "man/stdiscosrv.1", dst: "deb/usr/share/man/man1/stdiscosrv.1", perm: 0644},
 		},
 		tags: []string{"purego"},
 	},
 	"strelaysrv": {
-		name:       "strelaysrv",
-		buildPkg:   "./cmd/strelaysrv",
-		binaryName: "strelaysrv", // .exe will be added automatically for Windows builds
+		name:        "strelaysrv",
+		debname:     "syncthing-relaysrv",
+		debdeps:     []string{"libc6"},
+		description: "Syncthing Relay Server",
+		buildPkg:    "github.com/syncthing/syncthing/cmd/strelaysrv",
+		binaryName:  "strelaysrv", // .exe will be added automatically for Windows builds
 		archiveFiles: []archiveFile{
 			{src: "{{binary}}", dst: "{{binary}}", perm: 0755},
 			{src: "cmd/strelaysrv/README.md", dst: "README.txt", perm: 0644},
@@ -128,16 +147,19 @@ var targets = map[string]target{
 		},
 		installationFiles: []archiveFile{
 			{src: "{{binary}}", dst: "deb/usr/bin/{{binary}}", perm: 0755},
-			{src: "cmd/strelaysrv/README.md", dst: "deb/usr/share/doc/strelaysrv/README.txt", perm: 0644},
-			{src: "cmd/strelaysrv/LICENSE", dst: "deb/usr/share/doc/strelaysrv/LICENSE.txt", perm: 0644},
-			{src: "AUTHORS", dst: "deb/usr/share/doc/strelaysrv/AUTHORS.txt", perm: 0644},
+			{src: "cmd/strelaysrv/README.md", dst: "deb/usr/share/doc/syncthing-relaysrv/README.txt", perm: 0644},
+			{src: "cmd/strelaysrv/LICENSE", dst: "deb/usr/share/doc/syncthing-relaysrv/LICENSE.txt", perm: 0644},
+			{src: "AUTHORS", dst: "deb/usr/share/doc/syncthing-relaysrv/AUTHORS.txt", perm: 0644},
 			{src: "man/strelaysrv.1", dst: "deb/usr/share/man/man1/strelaysrv.1", perm: 0644},
 		},
 	},
 	"strelaypoolsrv": {
-		name:       "strelaypoolsrv",
-		buildPkg:   "./cmd/strelaypoolsrv",
-		binaryName: "strelaypoolsrv", // .exe will be added automatically for Windows builds
+		name:        "strelaypoolsrv",
+		debname:     "syncthing-relaypoolsrv",
+		debdeps:     []string{"libc6"},
+		description: "Syncthing Relay Pool Server",
+		buildPkg:    "github.com/syncthing/syncthing/cmd/strelaypoolsrv",
+		binaryName:  "strelaypoolsrv", // .exe will be added automatically for Windows builds
 		archiveFiles: []archiveFile{
 			{src: "{{binary}}", dst: "{{binary}}", perm: 0755},
 			{src: "cmd/strelaypoolsrv/README.md", dst: "README.txt", perm: 0644},
@@ -146,47 +168,13 @@ var targets = map[string]target{
 		},
 		installationFiles: []archiveFile{
 			{src: "{{binary}}", dst: "deb/usr/bin/{{binary}}", perm: 0755},
-			{src: "cmd/strelaypoolsrv/README.md", dst: "deb/usr/share/doc/relaysrv/README.txt", perm: 0644},
-			{src: "cmd/strelaypoolsrv/LICENSE", dst: "deb/usr/share/doc/relaysrv/LICENSE.txt", perm: 0644},
-			{src: "AUTHORS", dst: "deb/usr/share/doc/relaysrv/AUTHORS.txt", perm: 0644},
+			{src: "cmd/strelaypoolsrv/README.md", dst: "deb/usr/share/doc/syncthing-relaypoolsrv/README.txt", perm: 0644},
+			{src: "cmd/strelaypoolsrv/LICENSE", dst: "deb/usr/share/doc/syncthing-relaypoolsrv/LICENSE.txt", perm: 0644},
+			{src: "AUTHORS", dst: "deb/usr/share/doc/syncthing-relaypoolsrv/AUTHORS.txt", perm: 0644},
 		},
 	},
 }

-var (
-	// fast linters complete in a fraction of a second and might as well be
-	// run always as part of the build
-	fastLinters = []string{
-		"deadcode",
-		"golint",
-		"ineffassign",
-		"vet",
-	}
-
-	// slow linters take several seconds and are run only as part of the
-	// "metalint" command.
-	slowLinters = []string{
-		"gosimple",
-		"staticcheck",
-		"structcheck",
-		"unused",
-		"varcheck",
-	}
-
-	// Which parts of the tree to lint
-	lintDirs = []string{".", "./lib/...", "./cmd/..."}
-
-	// Messages to ignore
-	lintExcludes = []string{
-		".pb.go",
-		"should have comment",
-		"protocol.Vector composite literal uses unkeyed fields",
-		"cli.Requires composite literal uses unkeyed fields",
-		"Use DialContext instead",   // Go 1.7
-		"os.SEEK_SET is deprecated", // Go 1.7
-	}
-)
-
 func init() {
 	// The "syncthing" target includes a few more files found in the "etc"
 	// and "extra" dirs.
@@ -203,12 +191,11 @@ func init() {
 	targets["syncthing"] = syncthingPkg
 }

-const minGoVersion = 1.5
-
 func main() {
-	log.SetOutput(os.Stdout)
 	log.SetFlags(0)

+	parseFlags()
+
 	if debug {
 		t0 := time.Now()
 		defer func() {
@@ -216,21 +203,26 @@ func main() {
 		}()
 	}

-	if os.Getenv("GOPATH") == "" {
-		setGoPath()
+	if gopath() == "" {
+		gopath, err := temporaryBuildDir()
+		if err != nil {
+			log.Fatal(err)
+		}
+		if !noBuildGopath {
+			lazyRebuildAssets()
+			if err := buildGOPATH(gopath); err != nil {
+				log.Fatal(err)
+			}
+		}
+		os.Setenv("GOPATH", gopath)
+		log.Println("GOPATH is", gopath)
 	}

-	// We use Go 1.5+ vendoring.
-	os.Setenv("GO15VENDOREXPERIMENT", "1")
-
 	// Set path to $GOPATH/bin:$PATH so that we can for sure find tools we
 	// might have installed during "build.go setup".
 	os.Setenv("PATH", fmt.Sprintf("%s%cbin%c%s", os.Getenv("GOPATH"), os.PathSeparator, os.PathListSeparator, os.Getenv("PATH")))

-	parseFlags()
-
 	checkArchitecture()
-	goVersion, _ = checkRequiredGoVersion()

 	// Invoking build.go with no parameters at all builds everything (incrementally),
 	// which is what you want for maximum error checking during development.
@@ -255,7 +247,7 @@ func main() {

 func checkArchitecture() {
 	switch goarch {
-	case "386", "amd64", "arm", "arm64", "ppc64", "ppc64le":
+	case "386", "amd64", "arm", "arm64", "ppc64", "ppc64le", "mips", "mipsle":
 		break
 	default:
 		log.Printf("Unknown goarch %q; proceed with caution!", goarch)
@@ -272,22 +264,23 @@ func runCommand(cmd string, target target) {
 		if noupgrade {
 			tags = []string{"noupgrade"}
 		}
+		tags = append(tags, strings.Fields(extraTags)...)
 		install(target, tags)
-		metalint(fastLinters, lintDirs)
+		metalintShort()

 	case "build":
 		var tags []string
 		if noupgrade {
 			tags = []string{"noupgrade"}
 		}
+		tags = append(tags, strings.Fields(extraTags)...)
 		build(target, tags)
-		metalint(fastLinters, lintDirs)

 	case "test":
-		test("./lib/...", "./cmd/...")
+		test("github.com/syncthing/syncthing/lib/...", "github.com/syncthing/syncthing/cmd/...")

 	case "bench":
-		bench("./lib/...", "./cmd/...")
+		bench("github.com/syncthing/syncthing/lib/...", "github.com/syncthing/syncthing/cmd/...")

 	case "assets":
 		rebuildAssets()
@@ -317,67 +310,41 @@ func runCommand(cmd string, target target) {
 		clean()

 	case "vet":
-		metalint(fastLinters, lintDirs)
+		metalintShort()

 	case "lint":
-		metalint(fastLinters, lintDirs)
+		metalintShort()

 	case "metalint":
-		metalint(fastLinters, lintDirs)
-		metalint(slowLinters, lintDirs)
+		metalint()

 	case "version":
 		fmt.Println(getVersion())

+	case "gopath":
+		gopath, err := temporaryBuildDir()
+		if err != nil {
+			log.Fatal(err)
+		}
+		fmt.Println(gopath)
+
 	default:
 		log.Fatalf("Unknown command %q", cmd)
 	}
 }

-// setGoPath sets GOPATH correctly with the assumption that we are
-// in $GOPATH/src/github.com/syncthing/syncthing.
-func setGoPath() {
-	cwd, err := os.Getwd()
-	if err != nil {
-		log.Fatal(err)
-	}
-	gopath := filepath.Clean(filepath.Join(cwd, "../../../../"))
-	log.Println("GOPATH is", gopath)
-	os.Setenv("GOPATH", gopath)
-}
-
 func parseFlags() {
 	flag.StringVar(&goarch, "goarch", runtime.GOARCH, "GOARCH")
 	flag.StringVar(&goos, "goos", runtime.GOOS, "GOOS")
 	flag.BoolVar(&noupgrade, "no-upgrade", noupgrade, "Disable upgrade functionality")
 	flag.StringVar(&version, "version", getVersion(), "Set compiled in version string")
 	flag.BoolVar(&race, "race", race, "Use race detector")
+	flag.BoolVar(&noBuildGopath, "no-build-gopath", noBuildGopath, "Don't build GOPATH, assume it's OK")
+	flag.StringVar(&extraTags, "tags", extraTags, "Extra tags, space separated")
+	flag.StringVar(&installSuffix, "installsuffix", installSuffix, "Install suffix, optional")
 	flag.Parse()
 }

-func checkRequiredGoVersion() (float64, bool) {
-	re := regexp.MustCompile(`go(\d+\.\d+)`)
-	ver := runtime.Version()
-	if m := re.FindStringSubmatch(ver); len(m) == 2 {
-		vs := string(m[1])
-		// This is a standard go build. Verify that it's new enough.
-		f, err := strconv.ParseFloat(vs, 64)
-		if err != nil {
-			log.Printf("*** Couldn't parse Go version out of %q.\n*** This isn't known to work, proceed on your own risk.", vs)
-			return 0, false
-		}
-		if f < 1.5 {
-			log.Printf("*** Go version %.01f doesn't support the vendoring mechanism.\n*** Ensure correct dependencies in your $GOPATH.", f)
-		} else if f < minGoVersion {
-			log.Fatalf("*** Go version %.01f is less than required %.01f.\n*** This is known not to work, not proceeding.", f, minGoVersion)
-		}
-		return f, true
-	}
-
-	log.Printf("*** Unknown Go version %q.\n*** This isn't known to work, proceed on your own risk.", ver)
-	return 0, false
-}
-
 func setup() {
 	packages := []string{
 		"github.com/alecthomas/gometalinter",
@@ -400,6 +367,8 @@ func setup() {
 		fmt.Println(pkg)
 		runPrint("go", "get", "-u", pkg)
 	}
+
+	runPrint("go", "install", "-v", "github.com/syncthing/syncthing/vendor/github.com/gogo/protobuf/protoc-gen-gogofast")
 }

 func test(pkgs ...string) {
@@ -438,6 +407,9 @@ func install(target target, tags []string) {
 	if len(tags) > 0 {
 		args = append(args, "-tags", strings.Join(tags, " "))
 	}
+	if installSuffix != "" {
+		args = append(args, "-installsuffix", installSuffix)
+	}
 	if race {
 		args = append(args, "-race")
 	}
@@ -453,11 +425,14 @@ func build(target target, tags []string) {

 	tags = append(target.tags, tags...)

-	rmr(target.binaryName)
+	rmr(target.BinaryName())
 	args := []string{"build", "-i", "-v", "-ldflags", ldflags()}
 	if len(tags) > 0 {
 		args = append(args, "-tags", strings.Join(tags, " "))
 	}
+	if installSuffix != "" {
+		args = append(args, "-installsuffix", installSuffix)
+	}
 	if race {
 		args = append(args, "-race")
 	}
@@ -481,22 +456,20 @@ func buildTar(target target) {
 	build(target, tags)

 	if goos == "darwin" {
-		macosCodesign(target.binaryName)
+		macosCodesign(target.BinaryName())
 	}

 	for i := range target.archiveFiles {
-		target.archiveFiles[i].src = strings.Replace(target.archiveFiles[i].src, "{{binary}}", target.binaryName, 1)
-		target.archiveFiles[i].dst = strings.Replace(target.archiveFiles[i].dst, "{{binary}}", target.binaryName, 1)
+		target.archiveFiles[i].src = strings.Replace(target.archiveFiles[i].src, "{{binary}}", target.BinaryName(), 1)
+		target.archiveFiles[i].dst = strings.Replace(target.archiveFiles[i].dst, "{{binary}}", target.BinaryName(), 1)
 		target.archiveFiles[i].dst = name + "/" + target.archiveFiles[i].dst
 	}

 	tarGz(filename, target.archiveFiles)
-	log.Println(filename)
+	fmt.Println(filename)
 }

 func buildZip(target target) {
-	target.binaryName += ".exe"
-
 	name := archiveName(target)
 	filename := name + ".zip"

@@ -509,13 +482,13 @@ func buildZip(target target) {
 	build(target, tags)

 	for i := range target.archiveFiles {
-		target.archiveFiles[i].src = strings.Replace(target.archiveFiles[i].src, "{{binary}}", target.binaryName, 1)
-		target.archiveFiles[i].dst = strings.Replace(target.archiveFiles[i].dst, "{{binary}}", target.binaryName, 1)
+		target.archiveFiles[i].src = strings.Replace(target.archiveFiles[i].src, "{{binary}}", target.BinaryName(), 1)
+		target.archiveFiles[i].dst = strings.Replace(target.archiveFiles[i].dst, "{{binary}}", target.BinaryName(), 1)
 		target.archiveFiles[i].dst = name + "/" + target.archiveFiles[i].dst
 	}

 	zipFile(filename, target.archiveFiles)
-	log.Println(filename)
+	fmt.Println(filename)
 }

 func buildDeb(target target) {
@@ -535,8 +508,8 @@ func buildDeb(target target) {
 	build(target, []string{"noupgrade"})

 	for i := range target.installationFiles {
-		target.installationFiles[i].src = strings.Replace(target.installationFiles[i].src, "{{binary}}", target.binaryName, 1)
-		target.installationFiles[i].dst = strings.Replace(target.installationFiles[i].dst, "{{binary}}", target.binaryName, 1)
+		target.installationFiles[i].src = strings.Replace(target.installationFiles[i].src, "{{binary}}", target.BinaryName(), 1)
+		target.installationFiles[i].dst = strings.Replace(target.installationFiles[i].dst, "{{binary}}", target.BinaryName(), 1)
 	}

 	for _, af := range target.installationFiles {
@@ -549,16 +522,31 @@ func buildDeb(target target) {
 	debver := version
 	if strings.HasPrefix(debver, "v") {
 		debver = debver[1:]
+		// Debian interprets dashes as separator between main version and
+		// Debian package version, and thus thinks 0.14.26-rc.1 is better
+		// than just 0.14.26. This rectifies that.
+		debver = strings.Replace(debver, "-", "~", -1)
 	}
-	runPrint("fpm", "-t", "deb", "-s", "dir", "-C", "deb",
-		"-n", "syncthing", "-v", debver, "-a", debarch,
-		"--vendor", maintainer, "-m", maintainer,
-		"-d", "libc6",
-		"-d", "procps", // because postinst script
+	args := []string{
+		"-t", "deb",
+		"-s", "dir",
+		"-C", "deb",
+		"-n", target.debname,
+		"-v", debver,
+		"-a", debarch,
+		"-m", maintainer,
+		"--vendor", maintainer,
+		"--description", target.description,
 		"--url", "https://syncthing.net/",
-		"--description", "Open Source Continuous File Synchronization",
-		"--after-upgrade", "script/post-upgrade",
-		"--license", "MPL-2")
+		"--license", "MPL-2",
+	}
+	for _, dep := range target.debdeps {
+		args = append(args, "-d", dep)
+	}
+	if target.debpost != "" {
+		args = append(args, "--after-upgrade", target.debpost)
+	}
+	runPrint("fpm", args...)
 }

 func buildSnap(target target) {
@@ -583,7 +571,7 @@ func buildSnap(target target) {
 		snapver = snapver[1:]
 	}
 	snapgrade := "devel"
-	if matched, _ := regexp.MatchString(`^\d+\.\d+\.\d+$`, snapver); matched {
+	if matched, _ := regexp.MatchString(`^\d+\.\d+\.\d+(-rc.\d+)?$`, snapver); matched {
 		snapgrade = "stable"
 	}
 	err = tmpl.Execute(f, map[string]string{
@@ -599,21 +587,36 @@ func buildSnap(target target) {
 	runPrint("snapcraft")
 }

+// copyFile copies a file from src to dst, ensuring the containing directory
+// exists. The permission bits are copied as well. If dst already exists and
+// the contents are identical to src the modification time is not updated.
 func copyFile(src, dst string, perm os.FileMode) error {
-	dstDir := filepath.Dir(dst)
-	os.MkdirAll(dstDir, 0755) // ignore error
-	srcFd, err := os.Open(src)
+	in, err := ioutil.ReadFile(src)
 	if err != nil {
 		return err
 	}
-	defer srcFd.Close()
-	dstFd, err := os.OpenFile(dst, os.O_CREATE|os.O_TRUNC|os.O_WRONLY, perm)
+
+	out, err := ioutil.ReadFile(dst)
 	if err != nil {
+		// The destination probably doesn't exist, we should create
+		// it.
+		goto copy
+	}
+
+	if bytes.Equal(in, out) {
+		// The permission bits may have changed without the contents
+		// changing so we always mirror them.
+		os.Chmod(dst, perm)
+		return nil
+	}
+
+copy:
+	os.MkdirAll(filepath.Dir(dst), 0777)
+	if err := ioutil.WriteFile(dst, in, perm); err != nil {
 		return err
 	}
-	defer dstFd.Close()
-	_, err = io.Copy(dstFd, srcFd)
-	return err
+
+	return nil
 }

 func listFiles(dir string) []string {
@@ -668,7 +671,7 @@ func shouldRebuildAssets(target, srcdir string) bool {
 }

 func proto() {
-	runPrint("go", "generate", "./lib/...")
+	runPrint("go", "generate", "github.com/syncthing/syncthing/lib/...")
 }

 func translate() {
@@ -795,8 +798,9 @@ func getBranchSuffix() string {
 	}

 	branch = parts[len(parts)-1]
-	if branch == "master" {
-		// master builds are the default.
+	switch branch {
+	case "master", "release":
+		// these are not special
 		return ""
 	}

@@ -920,7 +924,10 @@ func tarGz(out string, files []archiveFile) {
 		log.Fatal(err)
 	}

-	gw := gzip.NewWriter(fd)
+	gw, err := gzip.NewWriterLevel(fd, gzip.BestCompression)
+	if err != nil {
+		log.Fatal(err)
+	}
 	tw := tar.NewWriter(gw)

 	for _, f := range files {
@@ -973,6 +980,21 @@ func zipFile(out string, files []archiveFile) {

 	zw := zip.NewWriter(fd)

+	var fw *flate.Writer
+
+	// Register the deflator.
+	zw.RegisterCompressor(zip.Deflate, func(out io.Writer) (io.WriteCloser, error) {
+		var err error
+		if fw == nil {
+			// Creating a flate compressor for every file is
+			// expensive, create one and reuse it.
+			fw, err = flate.NewWriter(out, flate.BestCompression)
+		} else {
+			fw.Reset(out)
+		}
+		return fw, err
+	})
+
 	for _, f := range files {
 		sf, err := os.Open(f.src)
 		if err != nil {
@@ -1048,59 +1070,129 @@ func macosCodesign(file string) {
 	}
 }

-func metalint(linters []string, dirs []string) {
-	ok := true
-	if isGometalinterInstalled() {
-		if !gometalinter(linters, dirs, lintExcludes...) {
-			ok = false
-		}
-	}
-	if !ok {
-		log.Fatal("Build succeeded, but there were lint warnings")
-	}
+func metalint() {
+	lazyRebuildAssets()
+	runPrint("go", "test", "-run", "Metalint", "./meta")
 }

-func isGometalinterInstalled() bool {
-	if _, err := runError("gometalinter", "--disable-all"); err != nil {
-		log.Println("gometalinter is not installed")
-		return false
-	}
-	return true
+func metalintShort() {
+	lazyRebuildAssets()
+	runPrint("go", "test", "-short", "-run", "Metalint", "./meta")
 }

-func gometalinter(linters []string, dirs []string, excludes ...string) bool {
-	params := []string{"--disable-all", "--concurrency=2", "--deadline=300s"}
+func temporaryBuildDir() (string, error) {
+	// The base of our temp dir is "syncthing-xxxxxxxx" where the x:es
+	// are eight bytes from the sha256 of our working directory. We do
+	// this because we want a name in the global temp dir that doesn't
+	// conflict with someone else building syncthing on the same
+	// machine, yet is persistent between runs from the same source
+	// directory.
+	wd, err := os.Getwd()
+	if err != nil {
+		return "", err
+	}
+	hash := sha256.Sum256([]byte(wd))
+	base := fmt.Sprintf("syncthing-%x", hash[:4])

-	for _, linter := range linters {
-		params = append(params, "--enable="+linter)
+	// The temp dir is taken from $STTMPDIR if set, otherwise the system
+	// default (potentially infrluenced by $TMPDIR on unixes).
+	var tmpDir string
+	if t := os.Getenv("STTMPDIR"); t != "" {
+		tmpDir = t
+	} else {
+		tmpDir = os.TempDir()
 	}

-	for _, exclude := range excludes {
-		params = append(params, "--exclude="+exclude)
+	return filepath.Join(tmpDir, base), nil
+}
+
+func buildGOPATH(gopath string) error {
+	pkg := filepath.Join(gopath, "src/github.com/syncthing/syncthing")
+	dirs := []string{"cmd", "lib", "meta", "script", "test", "vendor"}
+
+	if debug {
+		t0 := time.Now()
+		log.Println("build temporary GOPATH in", gopath)
+		defer func() {
+			log.Println("... in", time.Since(t0))
+		}()
 	}

+	// Walk the sources and copy the files into the temporary GOPATH.
+	// Remember which files are supposed to be present so we can clean
+	// out everything else in the next step. The copyFile() step will
+	// only actually copy the file if it doesn't exist or the contents
+	// differ.
+
+	exists := map[string]struct{}{}
 	for _, dir := range dirs {
-		params = append(params, dir)
+		err := filepath.Walk(dir, func(path string, info os.FileInfo, err error) error {
+			if err != nil {
+				return err
+			}
+			if info.IsDir() {
+				return nil
+			}
+
+			dst := filepath.Join(pkg, path)
+			exists[dst] = struct{}{}
+
+			if err := copyFile(path, dst, info.Mode()); err != nil {
+				return err
+			}
+
+			return nil
+		})
+		if err != nil {
+			return err
+		}
 	}

-	bs, _ := runError("gometalinter", params...)
+	// Walk the temporary GOPATH and remove any files that we wouldn't
+	// have copied there in the previous step.

-	nerr := 0
-	lines := make(map[string]struct{})
-	for _, line := range strings.Split(string(bs), "\n") {
-		if line == "" {
-			continue
+	filepath.Walk(pkg, func(path string, info os.FileInfo, err error) error {
+		if err != nil {
+			return err
 		}
-		if _, ok := lines[line]; ok {
-			continue
+		if info.IsDir() {
+			return nil
 		}
-		log.Println(line)
-		if strings.Contains(line, "executable file not found") {
-			log.Println(` - Try "go run build.go setup" to install missing tools`)
+		if _, ok := exists[path]; !ok {
+			os.Remove(path)
 		}
-		lines[line] = struct{}{}
-		nerr++
-	}
+		return nil
+	})

-	return nerr == 0
+	return nil
+}
+
+func gopath() string {
+	if gopath := os.Getenv("GOPATH"); gopath != "" {
+		// The env var is set, use that.
+		return gopath
+	}
+
+	// Ask Go what it thinks.
+	bs, err := runError("go", "env", "GOPATH")
+	if err != nil {
+		return ""
+	}
+
+	// We got something. Check if we are in fact available in that location.
+	gopath := string(bs)
+	if _, err := os.Stat(filepath.Join(gopath, "src/github.com/syncthing/syncthing/build.go")); err == nil {
+		// That seems to be the gopath.
+		return gopath
+	}
+
+	// The gopath is not valid.
+	return ""
+}
+
+func (t target) BinaryName() string {
+	if goos == "windows" {
+		return t.binaryName + ".exe"
+	}
+	return t.binaryName
 }
--- a/build.sh
+++ b/build.sh
@@ -61,9 +61,9 @@ case "${1:-default}" in
 	prerelease)
 		go run script/authors.go
 		build transifex
-		git add -A gui/default/assets/ lib/auto/
 		pushd man ; ./refresh.sh ; popd
-		git add -A man
+		git add -A gui man
+		git commit -m 'gui, man: Update docs & translations'
 		;;

 	noupgrade)
@@ -93,40 +93,6 @@ case "${1:-default}" in
 		done
 		;;

-	test-cov)
-		ulimit -t 600 &>/dev/null || true
-		ulimit -d 512000 &>/dev/null || true
-		ulimit -m 512000 &>/dev/null || true
-
-		echo "mode: set" > coverage.out
-		fail=0
-
-		# For every package in the repo
-		for dir in $(go list ./lib/... ./cmd/...) ; do
-			# run the tests
-			GOPATH="$(pwd)/Godeps/_workspace:$GOPATH" go test -coverprofile=profile.out $dir
-			if [ -f profile.out ] ; then
-				# and if there was test output, append it to coverage.out
-				grep -v "mode: " profile.out >> coverage.out
-				rm profile.out
-			fi
-		done
-
-		notCovered=$(egrep -c '\s0$' coverage.out)
-		total=$(wc -l coverage.out | awk '{print $1}')
-		coverPct=$(awk "BEGIN{print (1 - $notCovered / $total) * 100}")
-		echo "Total coverage is $coverPct%"
-
-		gocov convert coverage.out | gocov-xml > coverage.xml
-
-		# This is usually run from within Jenkins. If it is, we need to
-		# tweak the paths in coverage.xml so cobertura finds the
-		# source.
-		if [[ "${WORKSPACE:-default}" != "default" ]] ; then
-			sed "s#$WORKSPACE##g" < coverage.xml > coverage.xml.new && mv coverage.xml.new coverage.xml
-		fi
-		;;
-
 	test-xunit)
 		ulimit -t 600 &>/dev/null || true
 		ulimit -d 512000 &>/dev/null || true
--- a/cmd/stbench/main.go
+++ b/cmd/stbench/main.go
@@ -2,7 +2,7 @@
 //
 // This Source Code Form is subject to the terms of the Mozilla Public
 // License, v. 2.0. If a copy of the MPL was not distributed with this file,
-// You can obtain one at http://mozilla.org/MPL/2.0/.
+// You can obtain one at https://mozilla.org/MPL/2.0/.

 // This doesn't build on Windows due to the Rusage stuff.

--- a/cmd/stcli/README.md
+++ b/cmd/stcli/README.md
@@ -1,10 +0,0 @@
-syncthing-cli
-=============
-
-[![Latest Build](http://img.shields.io/jenkins/s/http/build.syncthing.net/syncthing-cli.svg?style=flat-square)](http://build.syncthing.net/job/syncthing-cli/lastBuild/)
-
-A CLI that talks to the Syncthing REST interface.
-
-`go get github.com/syncthing/syncthing-cli`
-
-Or download the [latest build](http://build.syncthing.net/job/syncthing-cli/lastSuccessfulBuild/artifact/).
--- a/cmd/stcompdirs/main.go
+++ b/cmd/stcompdirs/main.go
@@ -2,7 +2,7 @@
 //
 // This Source Code Form is subject to the terms of the Mozilla Public
 // License, v. 2.0. If a copy of the MPL was not distributed with this file,
-// You can obtain one at http://mozilla.org/MPL/2.0/.
+// You can obtain one at https://mozilla.org/MPL/2.0/.

 package main

@@ -15,8 +15,6 @@ import (
 	"log"
 	"os"
 	"path/filepath"
-
-	"github.com/syncthing/syncthing/lib/symlinks"
 )

 func main() {
@@ -104,7 +102,7 @@ func startWalker(dir string, res chan<- fileInfo, abort <-chan struct{}) chan er
 				mode: os.ModeSymlink,
 			}

-			tgt, _, err := symlinks.Read(path)
+			tgt, err := os.Readlink(path)
 			if err != nil {
 				return err
 			}
--- a/cmd/stdisco/main.go
+++ b/cmd/stdisco/main.go
@@ -2,7 +2,7 @@
 //
 // This Source Code Form is subject to the terms of the Mozilla Public
 // License, v. 2.0. If a copy of the MPL was not distributed with this file,
-// You can obtain one at http://mozilla.org/MPL/2.0/.
+// You can obtain one at https://mozilla.org/MPL/2.0/.

 package main

--- a/cmd/stdiscosrv/README.md
+++ b/cmd/stdiscosrv/README.md
@@ -1,14 +1,8 @@
 stdiscosrv
 ==========

-[![Latest Build](http://img.shields.io/jenkins/s/http/build.syncthing.net/stdiscosrv.svg?style=flat-square)](http://build.syncthing.net/job/stdiscosrv/lastBuild/)
-
 This is the global discovery server for the `syncthing` project.

-To get it, run `go get github.com/syncthing/stdiscosrv` or download the
-[latest build](http://build.syncthing.net/job/stdiscosrv/lastSuccessfulBuild/artifact/)
-from the build server.
-
 Usage
 -----

@@ -38,3 +32,7 @@ In all cases, the appropriate tables and indexes will be created at first
 startup. If it doesn't exit with an error, you're fine.

 See `stdiscosrv -help` for other options.
+
+##### Third-party attribution
+
+[cznic/lldb](https://github.com/cznic/lldb), Copyright (C) 2014 The lldb Authors.
--- a/cmd/stdiscosrv/querysrv.go
+++ b/cmd/stdiscosrv/querysrv.go
@@ -19,9 +19,9 @@ import (
 	"time"

 	"github.com/golang/groupcache/lru"
-	"github.com/juju/ratelimit"
 	"github.com/syncthing/syncthing/lib/protocol"
 	"golang.org/x/net/context"
+	"golang.org/x/time/rate"
 )

 type querysrv struct {
@@ -373,14 +373,14 @@ func (s *querysrv) limit(remote net.IP) bool {

 	bkt, ok := s.limiter.Get(key)
 	if ok {
-		bkt := bkt.(*ratelimit.Bucket)
-		if bkt.TakeAvailable(1) != 1 {
+		bkt := bkt.(*rate.Limiter)
+		if !bkt.Allow() {
 			// Rate limit exceeded; ignore packet
 			return true
 		}
 	} else {
-		// One packet per ten seconds average rate, burst ten packets
-		s.limiter.Add(key, ratelimit.NewBucket(10*time.Second/time.Duration(limitAvg), int64(limitBurst)))
+		// limitAvg is in packets per ten seconds.
+		s.limiter.Add(key, rate.NewLimiter(rate.Limit(limitAvg)/10, limitBurst))
 	}

 	return false
--- a/cmd/stevents/main.go
+++ b/cmd/stevents/main.go
@@ -2,7 +2,7 @@
 //
 // This Source Code Form is subject to the terms of the Mozilla Public
 // License, v. 2.0. If a copy of the MPL was not distributed with this file,
-// You can obtain one at http://mozilla.org/MPL/2.0/.
+// You can obtain one at https://mozilla.org/MPL/2.0/.

 package main

--- a/cmd/stfileinfo/main.go
+++ b/cmd/stfileinfo/main.go
@@ -2,11 +2,12 @@
 //
 // This Source Code Form is subject to the terms of the Mozilla Public
 // License, v. 2.0. If a copy of the MPL was not distributed with this file,
-// You can obtain one at http://mozilla.org/MPL/2.0/.
+// You can obtain one at https://mozilla.org/MPL/2.0/.

 package main

 import (
+	"context"
 	"flag"
 	"log"
 	"os"
@@ -70,7 +71,7 @@ func main() {
 		if *standardBlocks || blockSize < protocol.BlockSize {
 			blockSize = protocol.BlockSize
 		}
-		bs, err := scanner.Blocks(fd, blockSize, fi.Size(), nil)
+		bs, err := scanner.Blocks(context.TODO(), fd, blockSize, fi.Size(), nil, true)
 		if err != nil {
 			log.Fatal(err)
 		}
--- a/cmd/stfinddevice/main.go
+++ b/cmd/stfinddevice/main.go
@@ -2,7 +2,7 @@
 //
 // This Source Code Form is subject to the terms of the Mozilla Public
 // License, v. 2.0. If a copy of the MPL was not distributed with this file,
-// You can obtain one at http://mozilla.org/MPL/2.0/.
+// You can obtain one at https://mozilla.org/MPL/2.0/.

 package main

--- a/cmd/stgenfiles/main.go
+++ b/cmd/stgenfiles/main.go
@@ -2,7 +2,7 @@
 //
 // This Source Code Form is subject to the terms of the Mozilla Public
 // License, v. 2.0. If a copy of the MPL was not distributed with this file,
-// You can obtain one at http://mozilla.org/MPL/2.0/.
+// You can obtain one at https://mozilla.org/MPL/2.0/.

 package main

--- a/cmd/stindex/dump.go
+++ b/cmd/stindex/dump.go
@@ -2,7 +2,7 @@
 //
 // This Source Code Form is subject to the terms of the Mozilla Public
 // License, v. 2.0. If a copy of the MPL was not distributed with this file,
-// You can obtain one at http://mozilla.org/MPL/2.0/.
+// You can obtain one at https://mozilla.org/MPL/2.0/.

 package main

--- a/cmd/stindex/dumpsize.go
+++ b/cmd/stindex/dumpsize.go
@@ -2,7 +2,7 @@
 //
 // This Source Code Form is subject to the terms of the Mozilla Public
 // License, v. 2.0. If a copy of the MPL was not distributed with this file,
-// You can obtain one at http://mozilla.org/MPL/2.0/.
+// You can obtain one at https://mozilla.org/MPL/2.0/.

 package main

--- a/cmd/stindex/main.go
+++ b/cmd/stindex/main.go
@@ -2,7 +2,7 @@
 //
 // This Source Code Form is subject to the terms of the Mozilla Public
 // License, v. 2.0. If a copy of the MPL was not distributed with this file,
-// You can obtain one at http://mozilla.org/MPL/2.0/.
+// You can obtain one at https://mozilla.org/MPL/2.0/.

 package main

--- a/cmd/stindex/util.go
+++ b/cmd/stindex/util.go
@@ -2,7 +2,7 @@
 //
 // This Source Code Form is subject to the terms of the Mozilla Public
 // License, v. 2.0. If a copy of the MPL was not distributed with this file,
-// You can obtain one at http://mozilla.org/MPL/2.0/.
+// You can obtain one at https://mozilla.org/MPL/2.0/.

 package main

--- a/cmd/strelaypoolsrv/README.md
+++ b/cmd/strelaypoolsrv/README.md
@@ -1,15 +1,24 @@
 # relaypoolsrv

-[![Latest Build](http://img.shields.io/jenkins/s/http/build.syncthing.net/relaypoolsrv.svg?style=flat-square)](http://build.syncthing.net/job/relaypoolsrv/lastBuild/)
+This is the relay pool server for the `syncthing` project, which allows
+community hosted [relaysrv](https://github.com/syncthing/relaysrv)'s to join
+the public pool.

-This is the relay pool server for the `syncthing` project, which allows community hosted [relaysrv](https://github.com/syncthing/relaysrv)'s to join the public pool.
+Servers that join the pool are then advertised to users of `syncthing` as
+potential connection points for those who are unable to connect directly due
+to NAT or firewall issues.

-Servers that join the pool are then advertised to users of `syncthing` as potential connection points for those who are unable to connect directly due to NAT or firewall issues.
-
-There is very little reason why you'd want to run this yourself, as `relaypoolsrv` is just used for announcement and lookup of public relay servers. If you are looking to setup a private or a public relay, please check the documentation for [relaysrv](https://github.com/syncthing/relaysrv), which also explains how to join the default public pool.
-
-If you still want to run it, you can run `go get github.com/syncthing/relaypoolsrv` download it or download the
-[latest build](http://build.syncthing.net/job/relaypoolsrv/lastSuccessfulBuild/artifact/)
-from the build server.
+There is very little reason why you'd want to run this yourself, as
+`relaypoolsrv` is just used for announcement and lookup of public relay
+servers. If you are looking to setup a private or a public relay, please
+check the documentation for
+[relaysrv](https://github.com/syncthing/relaysrv), which also explains how
+to join the default public pool.

 See `relaypoolsrv -help` for configuration options.
+
+##### Third-party attributions
+
+[oschwald/geoip2-golang](https://github.com/oschwald/geoip2-golang), [oschwald/maxminddb-golang](https://github.com/oschwald/maxminddb-golang), Copyright (C) 2015 [Gregory J. Oschwald](mailto:oschwald@gmail.com).
+
+[lib/pq](https://github.com/lib/pq)</a>, Copyright (C) 2011-2013 'pq' Contributors Portions Copyright (C) 2011 Blake Mizerany.
--- a/cmd/strelaypoolsrv/gui/index.html
+++ b/cmd/strelaypoolsrv/gui/index.html
@@ -2,15 +2,15 @@

 <html lang="en" ng-app="syncthing" ng-controller="relayDataController">
  <head>
-    <meta charset="utf-8">
-    <meta http-equiv="X-UA-Compatible" content="IE=edge">
-    <meta name="viewport" content="width=device-width, initial-scale=1.0">
-    <meta name="description" content="">
-    <meta name="author" content="">
+    <meta charset="utf-8"/>
+    <meta http-equiv="X-UA-Compatible" content="IE=edge"/>
+    <meta name="viewport" content="width=device-width, initial-scale=1.0"/>
+    <meta name="description" content=""/>
+    <meta name="author" content=""/>

    <title>Relay stats</title>
-    <link href="//maxcdn.bootstrapcdn.com/bootstrap/3.3.5/css/bootstrap.min.css" rel="stylesheet">
-    <link rel="stylesheet" href="//maxcdn.bootstrapcdn.com/font-awesome/4.6.1/css/font-awesome.min.css">
+    <link href="//maxcdn.bootstrapcdn.com/bootstrap/3.3.5/css/bootstrap.min.css" rel="stylesheet"/>
+    <link rel="stylesheet" href="//maxcdn.bootstrapcdn.com/font-awesome/4.6.1/css/font-awesome.min.css"/>

    <style>
      #map {
@@ -36,9 +36,9 @@

  <body class="ng-cloak">
    <div class="container">
-      <h1>Relay Pool Data</h2>
+      <h1>Relay Pool Data</h1>
      <div ng-if="relays === undefined" class="text-center">
-        <img src="//cdnjs.cloudflare.com/ajax/libs/galleriffic/2.0.1/css/loader.gif"/>
+        <img src="//cdnjs.cloudflare.com/ajax/libs/galleriffic/2.0.1/css/loader.gif" alt=""/>
        <p>Please wait while we gather data</p>
      </div>
      <div>
@@ -48,7 +48,7 @@
          </p>
        </div>
        <div id="map"></div> <!-- Can't hide the map, otherwise it freaks out -->
-        <p>The circle size represents how much bytes the relay transfered relative to other relays</p>
+        <p>The circle size represents how much bytes the relay transferred relative to other relays</p>
      </div>
      <div>
        <table class="table table-striped table-condensed table">
@@ -138,7 +138,7 @@
            </tr>
          </thead>
          <tbody>
-            <tr ng-repeat="relay in relays | orderBy:sortType:sortReverse:sortCompare">
+            <tr ng-repeat="relay in relays | orderBy:sortType:sortReverse:sortCompare" ng-mouseover="relay.showMarker()" ng-mouseleave="relay.hideMarker()">
              <td>{{ relay.address }}</td>
              <td ng-if="relay.status === undefined" colspan="11" class="text-center">Looking up...</td>
              <td ng-if-start="relay.status !== undefined">{{ relay.status.numActiveSessions }}</td>
@@ -184,10 +184,10 @@
    </div>


-    <script src="//code.jquery.com/jquery-2.1.4.min.js"></script>
-    <script src="//cdnjs.cloudflare.com/ajax/libs/angular.js/1.5.8/angular.min.js"></script>
-    <script src="//maxcdn.bootstrapcdn.com/bootstrap/3.3.5/js/bootstrap.min.js"></script>
-    <script src="//maps.googleapis.com/maps/api/js"></script>
+    <script type="text/javascript" src="//code.jquery.com/jquery-2.1.4.min.js"></script>
+    <script type="text/javascript" src="//cdnjs.cloudflare.com/ajax/libs/angular.js/1.5.8/angular.min.js"></script>
+    <script type="text/javascript" src="//maxcdn.bootstrapcdn.com/bootstrap/3.3.5/js/bootstrap.min.js"></script>
+    <script type="text/javascript" src="//maps.googleapis.com/maps/api/js"></script>
  </body>

  <script>
@@ -307,13 +307,16 @@
          content: $compile($scope.tooltipTemplate)(scope)[0],
        });

-        relay.marker.addListener('mouseover', function() {
+        relay.showMarker = function() {
          relay.marker.info.open($scope.map, relay.marker);
-        });
+        }

-        relay.marker.addListener('mouseout', function() {
+        relay.hideMarker = function() {
          relay.marker.info.close();
-        });
+        }
+
+        relay.marker.addListener('mouseover', relay.showMarker);
+        relay.marker.addListener('mouseout', relay.hideMarker);

        $scope.mapBounds.extend(relay.marker.position);
    }
@@ -392,12 +395,12 @@
        <span ng-if="relay.status.options['global-rate'] != undefined">
          <span ng-if="relay.status.options['global-rate'] > 0">Global rate limit: {{ relay.status.options['global-rate'] | bytes }}/s</span>
          <span ng-if="relay.status.options['global-rate'] == 0">Global rate limit: unlimited</span>
-          </br>
+          <br/>
        </span>
        <span ng-if="relay.status.options['per-session-rate'] != undefined">
          <span ng-if="relay.status.options['per-session-rate'] > 0">Session rate limit: {{ relay.status.options['per-session-rate'] | bytes }}/s</span>
          <span ng-if="relay.status.options['per-session-rate'] == 0">Session rate limit: unlimited</span>
-          </br>
+          <br/>
        </span>
      </div>
      <div ng-if="!relay.status">
--- a/cmd/strelaypoolsrv/main.go
+++ b/cmd/strelaypoolsrv/main.go
@@ -23,14 +23,12 @@ import (
 	"time"

 	"github.com/golang/groupcache/lru"
-	"github.com/juju/ratelimit"
-
 	"github.com/oschwald/geoip2-golang"
-
 	"github.com/syncthing/syncthing/cmd/strelaypoolsrv/auto"
 	"github.com/syncthing/syncthing/lib/relay/client"
 	"github.com/syncthing/syncthing/lib/sync"
 	"github.com/syncthing/syncthing/lib/tlsutil"
+	"golang.org/x/time/rate"
 )

 type location struct {
@@ -65,12 +63,12 @@ var (
 	dir            string
 	evictionTime   = time.Hour
 	debug          bool
-	getLRUSize           = 10 << 10
-	getLimitBurst  int64 = 10
-	getLimitAvg          = 1
-	postLRUSize          = 1 << 10
-	postLimitBurst int64 = 2
-	postLimitAvg         = 1
+	getLRUSize     = 10 << 10
+	getLimitBurst  = 10
+	getLimitAvg    = 1
+	postLRUSize    = 1 << 10
+	postLimitBurst = 2
+	postLimitAvg   = 1
 	getLimit       time.Duration
 	postLimit      time.Duration
 	permRelaysFile string
@@ -99,10 +97,10 @@ func main() {
 	flag.DurationVar(&evictionTime, "eviction", evictionTime, "After how long the relay is evicted")
 	flag.IntVar(&getLRUSize, "get-limit-cache", getLRUSize, "Get request limiter cache size")
 	flag.IntVar(&getLimitAvg, "get-limit-avg", 2, "Allowed average get request rate, per 10 s")
-	flag.Int64Var(&getLimitBurst, "get-limit-burst", getLimitBurst, "Allowed burst get requests")
+	flag.IntVar(&getLimitBurst, "get-limit-burst", getLimitBurst, "Allowed burst get requests")
 	flag.IntVar(&postLRUSize, "post-limit-cache", postLRUSize, "Post request limiter cache size")
 	flag.IntVar(&postLimitAvg, "post-limit-avg", 2, "Allowed average post request rate, per minute")
-	flag.Int64Var(&postLimitBurst, "post-limit-burst", postLimitBurst, "Allowed burst post requests")
+	flag.IntVar(&postLimitBurst, "post-limit-burst", postLimitBurst, "Allowed burst post requests")
 	flag.StringVar(&permRelaysFile, "perm-relays", "", "Path to list of permanent relays")
 	flag.StringVar(&ipHeader, "ip-header", "", "Name of header which holds clients ip:port. Only meaningful when running behind a reverse proxy.")
 	flag.StringVar(&geoipPath, "geoip", "GeoLite2-City.mmdb", "Path to GeoLite2-City database")
@@ -446,7 +444,7 @@ func evict(relay relay) func() {
 	}
 }

-func limit(addr string, cache *lru.Cache, lock sync.RWMutex, rate time.Duration, burst int64) bool {
+func limit(addr string, cache *lru.Cache, lock sync.RWMutex, intv time.Duration, burst int) bool {
 	host, _, err := net.SplitHostPort(addr)
 	if err != nil {
 		return false
@@ -456,14 +454,14 @@ func limit(addr string, cache *lru.Cache, lock sync.RWMutex, rate time.Duration,
 	bkt, ok := cache.Get(host)
 	lock.RUnlock()
 	if ok {
-		bkt := bkt.(*ratelimit.Bucket)
-		if bkt.TakeAvailable(1) != 1 {
+		bkt := bkt.(*rate.Limiter)
+		if !bkt.Allow() {
 			// Rate limit
 			return true
 		}
 	} else {
 		lock.Lock()
-		cache.Add(host, ratelimit.NewBucket(rate, burst))
+		cache.Add(host, rate.NewLimiter(rate.Every(intv), burst))
 		lock.Unlock()
 	}
 	return false
--- a/cmd/strelaysrv/README.md
+++ b/cmd/strelaysrv/README.md
@@ -1,28 +1,20 @@
 strelaysrv
 ==========

-[![Latest Build](http://img.shields.io/jenkins/s/http/build.syncthing.net/strelaysrv.svg?style=flat-square)](http://build.syncthing.net/job/strelaysrv/lastBuild/)
-
 This is the relay server for the `syncthing` project.

-To get it, run `go get github.com/syncthing/syncthing/cmd/strelaysrv` or download the
-[latest build](http://build.syncthing.net/job/strelaysrv/lastSuccessfulBuild/artifact/)
-from the build server.
-
 :exclamation:Warnings:exclamation: - Read or regret
 -----

-By default, all relay servers will join the default public relay pool, which means that the relay server will be availble for public use, and **will consume your bandwidth** helping others to connect.
+By default, all relay servers will join to the default public relay pool, which means that the relay server will be available for public use, and **will consume your bandwidth** helping others to connect.

-If you wish to disable this behaviour, please specify `-pools=""` argument.
+If you wish to disable this behaviour, please specify the `-pools=""` argument.

 Please note that `strelaysrv` is only usable by `syncthing` **version v0.12 and onwards**.

-To run `strelaysrv` you need to have port 22067 available to the internet, which means you might need to allow it through your firewall if you **have a public IP, or setup a port-forwarding** (22067 to 22067) if you are behind a router.
+To run `strelaysrv` you need to have port 22067 available to the internet, which means you might need to port forward it and/or allow it through your firewall.

-Furthermore, **by default strelaysrv will also expose a /status HTTP endpoint on port 22070**, which is used by the pool servers to peek at metrics of the strelaysrv, such as what are the current transfer rates, how many clients are connected, etc, etc. If you wish this information to be available, similarlly you might want to allow it through your firewall, or port-forward it (22070 to 22070) on your NAT device.
-
-This is **not mandatory** for the strelaysrv to function, and is used only to gather metrics and present them in the overview page of the pool server, displaying stats about the specific relay.
+Furthermore, by default `strelaysrv` will also expose a /status HTTP endpoint on port 22070, which is used by the pool servers to read metrics of the `strelaysrv`, such as  the current transfer rates, how many clients are connected, etc. If you wish this information to be available you may need to port forward and allow it through your firewall. This is not mandatory for the `strelaysrv` to function, and is used only to gather metrics and present them in the overview page of the pool server.

 At the point of writing the endpoint output looks as follows:

@@ -66,7 +58,7 @@ If you wish to disable the /status endpoint, provide `-status-srv=""` as one of

 Running for public use
 ----
-Make sure you have a public IP with port 22067 open, or make sure you have port-forwarding (22067 to 22067) if you are behind a router.
+Make sure you have a public IP with port 22067 open, or have forwarded port 22067 if you are behind a NAT.

 Run the `strelaysrv` with no arguments (or `-debug` if you want more output), and that should be enough for the server to join the public relay pool.
 You should see a message saying:
@@ -79,37 +71,37 @@ See `strelaysrv -help` for other options, such as rate limits, timeout intervals
 Running for private use
 -----

-Once you've started the `strelaysrv`, it will generate a key pair and print an URI:
+Once you've started the `strelaysrv`, it will generate a key pair and print a URI:
 ```bash
 relay://:22067/?id=EZQOIDM-6DDD4ZI-DJ65NSM-4OQWRAT-EIKSMJO-OZ552BO-WQZEGYY-STS5RQM&pingInterval=1m0s&networkTimeout=2m0s&sessionLimitBps=0&globalLimitBps=0&statusAddr=:22070
 ```

-This URI contains partial address of the relay server, as well as it's options which in the future may be taken into account when choosing the best suitable relay out of multiple available.
+This URI contains a partial address of the relay server, as well as its options which in the future may be taken into account when choosing the most suitable relay.

-Because `-listen` option was not used, the `strelaysrv` does not know it's external IP, therefore you should replace the host part of the URI with your public IP address on which the `strelaysrv` will be available:
+Because the `-listen` option was not used `strelaysrv` does not know its external IP, therefore you should replace the host part of the URI with your public IP address on which the `strelaysrv` will be available:

 ```bash
-relay://123.123.123.123:22067/?id=EZQOIDM-6DDD4ZI-DJ65NSM-4OQWRAT-EIKSMJO-OZ552BO-WQZEGYY-STS5RQM&pingInterval=1m0s&networkTimeout=2m0s&sessionLimitBps=0&globalLimitBps=0&statusAddr=:22070
+relay://192.0.2.1:22067/?id=EZQOIDM-6DDD4ZI-DJ65NSM-4OQWRAT-EIKSMJO-OZ552BO-WQZEGYY-STS5RQM&pingInterval=1m0s&networkTimeout=2m0s&sessionLimitBps=0&globalLimitBps=0&statusAddr=:22070
 ```

 If you do not care about certificate pinning (improved security) or do not care about passing verbose settings to the clients, you can shorten the URL to just the host part:

 ```bash
-relay://123.123.123.123:22067
+relay://192.0.2.1:22067
 ```

-This URI can then be used in `syncthing` as one of the relay servers.
+This URI can then be used in `syncthing` clients as one of the relay servers by adding the URI to the "Sync Protocol Listen Address" field, under Actions and Settings.

 See `strelaysrv -help` for other options, such as rate limits, timeout intervals, etc.

 Other items available in this repo
 ----
 ##### testutil
-A test utility which can be used to test connectivity of a relay server.
-You need to generate two x509 key pairs (key.pem and cert.pem), one for the client, another one for the server, in separate directories.
+A test utility which can be used to test the connectivity of a relay server.
+You need to generate two x509 key pairs (key.pem and cert.pem), one for the client and one for the server, in separate directories.
 Afterwards, start the client:
 ```bash
-./testutil -relay="relay://uri.of.relay" -keys=certs/client/ -join
+./testutil -relay="relay://192.0.2.1:22067" -keys=certs/client/ -join
 ```

 This prints out the client ID:
@@ -120,7 +112,7 @@ This prints out the client ID:
 In the other terminal run the following:

 ```bash
- ./testutil -relay="relay://uri.of.relay" -keys=certs/server/ -connect=BG2C5ZA-W7XPFDO-LH222Z6-65F3HJX-ADFTGRT-3SBFIGM-KV26O2Q-E5RMRQ2
+ ./testutil -relay="relay://192.0.2.1:22067" -keys=certs/server/ -connect=BG2C5ZA-W7XPFDO-LH222Z6-65F3HJX-ADFTGRT-3SBFIGM-KV26O2Q-E5RMRQ2
 ```

 Which should then give you an interactive prompt, where you can type things in one terminal, and they get relayed to the other terminal.
@@ -137,5 +129,3 @@ Relay related libraries used by this repo
 Only used by the testutil.

 [Available here](https://github.com/syncthing/syncthing/tree/master/lib/relay/client)
-
-
--- a/cmd/strelaysrv/listener.go
+++ b/cmd/strelaysrv/listener.go
@@ -59,6 +59,13 @@ func listener(proto, addr string, config *tls.Config) {

 func protocolConnectionHandler(tcpConn net.Conn, config *tls.Config) {
 	conn := tls.Server(tcpConn, config)
+	if err := conn.SetDeadline(time.Now().Add(messageTimeout)); err != nil {
+		if debug {
+			log.Println("Weird error setting deadline:", err, "on", conn.RemoteAddr())
+		}
+		conn.Close()
+		return
+	}
 	err := conn.Handshake()
 	if err != nil {
 		if debug {
@@ -81,6 +88,7 @@ func protocolConnectionHandler(tcpConn net.Conn, config *tls.Config) {
 		conn.Close()
 		return
 	}
+	conn.SetDeadline(time.Time{})

 	id := syncthingprotocol.NewDeviceID(certs[0].Raw)

@@ -277,6 +285,7 @@ func sessionConnectionHandler(conn net.Conn) {
 		if debug {
 			log.Println("Weird error setting deadline:", err, "on", conn.RemoteAddr())
 		}
+		conn.Close()
 		return
 	}

--- a/cmd/strelaysrv/main.go
+++ b/cmd/strelaysrv/main.go
@@ -20,10 +20,10 @@ import (
 	"syscall"
 	"time"

-	"github.com/juju/ratelimit"
 	"github.com/syncthing/syncthing/lib/osutil"
 	"github.com/syncthing/syncthing/lib/relay/protocol"
 	"github.com/syncthing/syncthing/lib/tlsutil"
+	"golang.org/x/time/rate"

 	"github.com/syncthing/syncthing/lib/config"
 	"github.com/syncthing/syncthing/lib/nat"
@@ -68,8 +68,8 @@ var (
 	globalLimitBps  int
 	overLimit       int32
 	descriptorLimit int64
-	sessionLimiter  *ratelimit.Bucket
-	globalLimiter   *ratelimit.Bucket
+	sessionLimiter  *rate.Limiter
+	globalLimiter   *rate.Limiter

 	statusAddr       string
 	poolAddrs        string
@@ -215,10 +215,10 @@ func main() {
 	}

 	if sessionLimitBps > 0 {
-		sessionLimiter = ratelimit.NewBucketWithRate(float64(sessionLimitBps), int64(2*sessionLimitBps))
+		sessionLimiter = rate.NewLimiter(rate.Limit(sessionLimitBps), 2*sessionLimitBps)
 	}
 	if globalLimitBps > 0 {
-		globalLimiter = ratelimit.NewBucketWithRate(float64(globalLimitBps), int64(2*globalLimitBps))
+		globalLimiter = rate.NewLimiter(rate.Limit(globalLimitBps), 2*globalLimitBps)
 	}

 	if statusAddr != "" {
--- a/cmd/strelaysrv/session.go
+++ b/cmd/strelaysrv/session.go
@@ -7,15 +7,16 @@ import (
 	"encoding/hex"
 	"fmt"
 	"log"
+	"math"
 	"net"
 	"sync"
 	"sync/atomic"
 	"time"

-	"github.com/juju/ratelimit"
-	"github.com/syncthing/syncthing/lib/relay/protocol"
+	"golang.org/x/time/rate"

 	syncthingprotocol "github.com/syncthing/syncthing/lib/protocol"
+	"github.com/syncthing/syncthing/lib/relay/protocol"
 )

 var (
@@ -26,7 +27,7 @@ var (
 	bytesProxied    int64
 )

-func newSession(serverid, clientid syncthingprotocol.DeviceID, sessionRateLimit, globalRateLimit *ratelimit.Bucket) *session {
+func newSession(serverid, clientid syncthingprotocol.DeviceID, sessionRateLimit, globalRateLimit *rate.Limiter) *session {
 	serverkey := make([]byte, 32)
 	_, err := rand.Read(serverkey)
 	if err != nil {
@@ -108,7 +109,7 @@ type session struct {
 	clientkey []byte
 	clientid  syncthingprotocol.DeviceID

-	rateLimit func(bytes int64)
+	rateLimit func(bytes int)

 	connsChan chan net.Conn
 	conns     []net.Conn
@@ -268,7 +269,7 @@ func (s *session) proxy(c1, c2 net.Conn) error {
 		}

 		if s.rateLimit != nil {
-			s.rateLimit(int64(n))
+			s.rateLimit(n)
 		}

 		c2.SetWriteDeadline(time.Now().Add(networkTimeout))
@@ -283,7 +284,7 @@ func (s *session) String() string {
 	return fmt.Sprintf("<%s/%s>", hex.EncodeToString(s.clientkey)[:5], hex.EncodeToString(s.serverkey)[:5])
 }

-func makeRateLimitFunc(sessionRateLimit, globalRateLimit *ratelimit.Bucket) func(int64) {
+func makeRateLimitFunc(sessionRateLimit, globalRateLimit *rate.Limiter) func(int) {
 	// This may be a case of super duper premature optimization... We build an
 	// optimized function to do the rate limiting here based on what we need
 	// to do and then use it in the loop.
@@ -298,29 +299,55 @@ func makeRateLimitFunc(sessionRateLimit, globalRateLimit *ratelimit.Bucket) func

 	if sessionRateLimit == nil {
 		// We only have a global limiter
-		return func(bytes int64) {
-			globalRateLimit.Wait(bytes)
+		return func(bytes int) {
+			take(bytes, globalRateLimit)
 		}
 	}

 	if globalRateLimit == nil {
 		// We only have a session limiter
-		return func(bytes int64) {
-			sessionRateLimit.Wait(bytes)
+		return func(bytes int) {
+			take(bytes, sessionRateLimit)
 		}
 	}

 	// We have both. Queue the bytes on both the global and session specific
-	// rate limiters. Wait for both in parallell, so that the actual send
-	// happens when both conditions are satisfied. In practice this just means
-	// wait the longer of the two times.
-	return func(bytes int64) {
-		t0 := sessionRateLimit.Take(bytes)
-		t1 := globalRateLimit.Take(bytes)
-		if t0 > t1 {
-			time.Sleep(t0)
-		} else {
-			time.Sleep(t1)
-		}
+	// rate limiters.
+	return func(bytes int) {
+		take(bytes, sessionRateLimit, globalRateLimit)
+	}
+}
+
+// take is a utility function to consume tokens from a set of rate.Limiters.
+// Tokens are consumed in parallel on all limiters, respecting their
+// individual burst sizes.
+func take(tokens int, ls ...*rate.Limiter) {
+	// minBurst is the smallest burst size supported by all limiters.
+	minBurst := int(math.MaxInt32)
+	for _, l := range ls {
+		if burst := l.Burst(); burst < minBurst {
+			minBurst = burst
+		}
+	}
+
+	for tokens > 0 {
+		// chunk is how many tokens we can consume at a time
+		chunk := tokens
+		if chunk > minBurst {
+			chunk = minBurst
+		}
+
+		// maxDelay is the longest delay mandated by any of the limiters for
+		// the chosen chunk size.
+		var maxDelay time.Duration
+		for _, l := range ls {
+			res := l.ReserveN(time.Now(), chunk)
+			if del := res.Delay(); del > maxDelay {
+				maxDelay = del
+			}
+		}
+
+		time.Sleep(maxDelay)
+		tokens -= chunk
 	}
 }
--- a/cmd/strelaysrv/status.go
+++ b/cmd/strelaysrv/status.go
@@ -16,8 +16,16 @@ var rc *rateCalculator
 func statusService(addr string) {
 	rc = newRateCalculator(360, 10*time.Second, &bytesProxied)

-	http.HandleFunc("/status", getStatus)
-	if err := http.ListenAndServe(addr, nil); err != nil {
+	handler := http.NewServeMux()
+	handler.HandleFunc("/status", getStatus)
+
+	srv := http.Server{
+		Addr:        addr,
+		Handler:     handler,
+		ReadTimeout: 15 * time.Second,
+	}
+	srv.SetKeepAlivesEnabled(false)
+	if err := srv.ListenAndServe(); err != nil {
 		log.Fatal(err)
 	}
 }
--- a/cmd/stsigtool/main.go
+++ b/cmd/stsigtool/main.go
@@ -2,7 +2,7 @@
 //
 // This Source Code Form is subject to the terms of the Mozilla Public
 // License, v. 2.0. If a copy of the MPL was not distributed with this file,
-// You can obtain one at http://mozilla.org/MPL/2.0/.
+// You can obtain one at https://mozilla.org/MPL/2.0/.

 package main

--- a/cmd/stvanity/main.go
+++ b/cmd/stvanity/main.go
@@ -2,7 +2,7 @@
 //
 // This Source Code Form is subject to the terms of the Mozilla Public
 // License, v. 2.0. If a copy of the MPL was not distributed with this file,
-// You can obtain one at http://mozilla.org/MPL/2.0/.
+// You can obtain one at https://mozilla.org/MPL/2.0/.

 package main

--- a/cmd/stwatchfile/main.go
+++ b/cmd/stwatchfile/main.go
@@ -2,7 +2,7 @@
 //
 // This Source Code Form is subject to the terms of the Mozilla Public
 // License, v. 2.0. If a copy of the MPL was not distributed with this file,
-// You can obtain one at http://mozilla.org/MPL/2.0/.
+// You can obtain one at https://mozilla.org/MPL/2.0/.

 package main

--- a/cmd/syncthing/auditservice.go
+++ b/cmd/syncthing/auditservice.go
@@ -2,7 +2,7 @@
 //
 // This Source Code Form is subject to the terms of the Mozilla Public
 // License, v. 2.0. If a copy of the MPL was not distributed with this file,
-// You can obtain one at http://mozilla.org/MPL/2.0/.
+// You can obtain one at https://mozilla.org/MPL/2.0/.

 package main

--- a/cmd/syncthing/auditservice_test.go
+++ b/cmd/syncthing/auditservice_test.go
@@ -2,7 +2,7 @@
 //
 // This Source Code Form is subject to the terms of the Mozilla Public
 // License, v. 2.0. If a copy of the MPL was not distributed with this file,
-// You can obtain one at http://mozilla.org/MPL/2.0/.
+// You can obtain one at https://mozilla.org/MPL/2.0/.

 package main

@@ -20,13 +20,13 @@ func TestAuditService(t *testing.T) {
 	service := newAuditService(buf)

 	// Event sent before start, will not be logged
-	events.Default.Log(events.Ping, "the first event")
+	events.Default.Log(events.ConfigSaved, "the first event")

 	go service.Serve()
 	service.WaitForStart()

 	// Event that should end up in the audit log
-	events.Default.Log(events.Ping, "the second event")
+	events.Default.Log(events.ConfigSaved, "the second event")

 	// We need to give the events time to arrive, since the channels are buffered etc.
 	time.Sleep(10 * time.Millisecond)
@@ -35,7 +35,7 @@ func TestAuditService(t *testing.T) {
 	service.WaitForStop()

 	// This event should not be logged, since we have stopped.
-	events.Default.Log(events.Ping, "the third event")
+	events.Default.Log(events.ConfigSaved, "the third event")

 	result := string(buf.Bytes())
 	t.Log(result)
--- a/cmd/syncthing/blockprof.go
+++ b/cmd/syncthing/blockprof.go
@@ -2,7 +2,7 @@
 //
 // This Source Code Form is subject to the terms of the Mozilla Public
 // License, v. 2.0. If a copy of the MPL was not distributed with this file,
-// You can obtain one at http://mozilla.org/MPL/2.0/.
+// You can obtain one at https://mozilla.org/MPL/2.0/.

 package main

--- a/cmd/syncthing/buildtag_noupgrade.go
+++ b/cmd/syncthing/buildtag_noupgrade.go
@@ -0,0 +1,13 @@
+// Copyright (C) 2017 The Syncthing Authors.
+//
+// This Source Code Form is subject to the terms of the Mozilla Public
+// License, v. 2.0. If a copy of the MPL was not distributed with this file,
+// You can obtain one at https://mozilla.org/MPL/2.0/.
+
+//+build noupgrade
+
+package main
+
+func init() {
+	BuildTags = append(BuildTags, "noupgrade")
+}
--- a/cmd/syncthing/buildtag_race.go
+++ b/cmd/syncthing/buildtag_race.go
@@ -0,0 +1,13 @@
+// Copyright (C) 2017 The Syncthing Authors.
+//
+// This Source Code Form is subject to the terms of the Mozilla Public
+// License, v. 2.0. If a copy of the MPL was not distributed with this file,
+// You can obtain one at https://mozilla.org/MPL/2.0/.
+
+//+build race
+
+package main
+
+func init() {
+	BuildTags = append(BuildTags, "race")
+}
--- a/cmd/syncthing/cpuusage.go
+++ b/cmd/syncthing/cpuusage.go
@@ -0,0 +1,59 @@
+// Copyright (C) 2017 The Syncthing Authors.
+//
+// This Source Code Form is subject to the terms of the Mozilla Public
+// License, v. 2.0. If a copy of the MPL was not distributed with this file,
+// You can obtain one at https://mozilla.org/MPL/2.0/.
+
+package main
+
+import (
+	"math"
+	"time"
+
+	metrics "github.com/rcrowley/go-metrics"
+)
+
+const cpuTickRate = 5 * time.Second
+
+type cpuService struct {
+	avg  metrics.EWMA
+	stop chan struct{}
+}
+
+func newCPUService() *cpuService {
+	return &cpuService{
+		// 10 second average. Magic alpha value comes from looking at EWMA package
+		// definitions of EWMA1, EWMA5. The tick rate *must* be five seconds (hard
+		// coded in the EWMA package).
+		avg:  metrics.NewEWMA(1 - math.Exp(-float64(cpuTickRate)/float64(time.Second)/10.0)),
+		stop: make(chan struct{}),
+	}
+}
+
+func (s *cpuService) Serve() {
+	// Initialize prevUsage to an actual value returned by cpuUsage
+	// instead of zero, because at least Windows returns a huge negative
+	// number here that then slowly increments...
+	prevUsage := cpuUsage()
+	ticker := time.NewTicker(cpuTickRate)
+	defer ticker.Stop()
+	for {
+		select {
+		case <-ticker.C:
+			curUsage := cpuUsage()
+			s.avg.Update(int64((curUsage - prevUsage) / time.Millisecond))
+			prevUsage = curUsage
+			s.avg.Tick()
+		case <-s.stop:
+			return
+		}
+	}
+}
+
+func (s *cpuService) Stop() {
+	close(s.stop)
+}
+
+func (s *cpuService) Rate() float64 {
+	return s.avg.Rate()
+}
--- a/cmd/syncthing/cpuusage_solaris.go
+++ b/cmd/syncthing/cpuusage_solaris.go
@@ -2,7 +2,7 @@
 //
 // This Source Code Form is subject to the terms of the Mozilla Public
 // License, v. 2.0. If a copy of the MPL was not distributed with this file,
-// You can obtain one at http://mozilla.org/MPL/2.0/.
+// You can obtain one at https://mozilla.org/MPL/2.0/.

 //+build solaris

@@ -59,40 +59,20 @@ type prusage_t struct {

 }

-func solarisPrusage(pid int, rusage *prusage_t) error {
-	fd, err := os.Open(fmt.Sprintf("/proc/%d/usage", pid))
+var procFile = fmt.Sprintf("/proc/%d/usage", os.Getpid())
+
+func cpuUsage() time.Duration {
+	fd, err := os.Open(procFile)
 	if err != nil {
-		return err
+		return 0
 	}
+
+	var rusage prusage_t
 	err = binary.Read(fd, binary.LittleEndian, rusage)
 	fd.Close()
-	return err
-}
-
-func init() {
-	go trackCPUUsage()
-}
-
-func trackCPUUsage() {
-	var prevUsage int64
-	var prevTime = time.Now().UnixNano()
-	var rusage prusage_t
-	var pid = os.Getpid()
-	for range time.NewTicker(time.Second).C {
-		err := solarisPrusage(pid, &rusage)
-		if err != nil {
-			l.Warnln("getting prusage:", err)
-			continue
-		}
-		curTime := time.Now().UnixNano()
-		timeDiff := curTime - prevTime
-		curUsage := rusage.Pr_utime.Nano() + rusage.Pr_stime.Nano()
-		usageDiff := curUsage - prevUsage
-		cpuUsageLock.Lock()
-		copy(cpuUsagePercent[1:], cpuUsagePercent[0:])
-		cpuUsagePercent[0] = 100 * float64(usageDiff) / float64(timeDiff)
-		cpuUsageLock.Unlock()
-		prevTime = curTime
-		prevUsage = curUsage
+	if err != nil {
+		return 0
 	}
+
+	return time.Duration(rusage.Pr_utime.Nano() + rusage.Pr_stime.Nano())
 }
--- a/cmd/syncthing/cpuusage_unix.go
+++ b/cmd/syncthing/cpuusage_unix.go
@@ -0,0 +1,18 @@
+// Copyright (C) 2014 The Syncthing Authors.
+//
+// This Source Code Form is subject to the terms of the Mozilla Public
+// License, v. 2.0. If a copy of the MPL was not distributed with this file,
+// You can obtain one at https://mozilla.org/MPL/2.0/.
+
+//+build !windows,!solaris
+
+package main
+
+import "syscall"
+import "time"
+
+func cpuUsage() time.Duration {
+	var rusage syscall.Rusage
+	syscall.Getrusage(syscall.RUSAGE_SELF, &rusage)
+	return time.Duration(rusage.Utime.Nano() + rusage.Stime.Nano())
+}
--- a/cmd/syncthing/cpuusage_windows.go
+++ b/cmd/syncthing/cpuusage_windows.go
@@ -0,0 +1,27 @@
+// Copyright (C) 2014 The Syncthing Authors.
+//
+// This Source Code Form is subject to the terms of the Mozilla Public
+// License, v. 2.0. If a copy of the MPL was not distributed with this file,
+// You can obtain one at https://mozilla.org/MPL/2.0/.
+
+//+build windows
+
+package main
+
+import "syscall"
+import "time"
+
+func cpuUsage() time.Duration {
+	handle, err := syscall.GetCurrentProcess()
+	if err != nil {
+		return 0
+	}
+	defer syscall.CloseHandle(handle)
+
+	var ctime, etime, ktime, utime syscall.Filetime
+	if err := syscall.GetProcessTimes(handle, &ctime, &etime, &ktime, &utime); err != nil {
+		return 0
+	}
+
+	return time.Duration(ktime.Nanoseconds() + utime.Nanoseconds())
+}
--- a/cmd/syncthing/debug.go
+++ b/cmd/syncthing/debug.go
@@ -2,7 +2,7 @@
 //
 // This Source Code Form is subject to the terms of the Mozilla Public
 // License, v. 2.0. If a copy of the MPL was not distributed with this file,
-// You can obtain one at http://mozilla.org/MPL/2.0/.
+// You can obtain one at https://mozilla.org/MPL/2.0/.

 package main

--- a/cmd/syncthing/gui.go
+++ b/cmd/syncthing/gui.go
@@ -2,7 +2,7 @@
 //
 // This Source Code Form is subject to the terms of the Mozilla Public
 // License, v. 2.0. If a copy of the MPL was not distributed with this file,
-// You can obtain one at http://mozilla.org/MPL/2.0/.
+// You can obtain one at https://mozilla.org/MPL/2.0/.

 package main

@@ -45,6 +45,12 @@ var (
 	startTime = time.Now()
 )

+const (
+	defaultEventMask   = events.AllEvents &^ events.LocalChangeDetected &^ events.RemoteChangeDetected
+	diskEventMask      = events.LocalChangeDetected | events.RemoteChangeDetected
+	eventSubBufferSize = 1000
+)
+
 type apiService struct {
 	id                 protocol.DeviceID
 	cfg                configIntf
@@ -52,8 +58,8 @@ type apiService struct {
 	httpsKeyFile       string
 	statics            *staticsServer
 	model              modelIntf
-	eventSub           events.BufferedSubscription
-	diskEventSub       events.BufferedSubscription
+	eventSubs          map[events.EventType]events.BufferedSubscription
+	eventSubsMut       sync.Mutex
 	discoverer         discover.CachingMux
 	connectionsService connectionsIntf
 	fss                *folderSummaryService
@@ -62,6 +68,7 @@ type apiService struct {
 	configChanged      chan struct{} // signals intentional listener close due to config change
 	started            chan string   // signals startup complete by sending the listener address, for testing only
 	startedOnce        chan struct{} // the service has started successfully at least once
+	cpu                rater

 	guiErrors logger.Recorder
 	systemLog logger.Recorder
@@ -104,6 +111,7 @@ type configIntf interface {
 	Folders() map[string]config.FolderConfiguration
 	Devices() map[protocol.DeviceID]config.DeviceConfiguration
 	SetDevice(config.DeviceConfiguration) error
+	SetDevices([]config.DeviceConfiguration) error
 	Save() error
 	ListenAddresses() []string
 	RequiresRestart() bool
@@ -113,16 +121,23 @@ type connectionsIntf interface {
 	Status() map[string]interface{}
 }

-func newAPIService(id protocol.DeviceID, cfg configIntf, httpsCertFile, httpsKeyFile, assetDir string, m modelIntf, eventSub events.BufferedSubscription, diskEventSub events.BufferedSubscription, discoverer discover.CachingMux, connectionsService connectionsIntf, errors, systemLog logger.Recorder) *apiService {
+type rater interface {
+	Rate() float64
+}
+
+func newAPIService(id protocol.DeviceID, cfg configIntf, httpsCertFile, httpsKeyFile, assetDir string, m modelIntf, defaultSub, diskSub events.BufferedSubscription, discoverer discover.CachingMux, connectionsService connectionsIntf, errors, systemLog logger.Recorder, cpu rater) *apiService {
 	service := &apiService{
-		id:                 id,
-		cfg:                cfg,
-		httpsCertFile:      httpsCertFile,
-		httpsKeyFile:       httpsKeyFile,
-		statics:            newStaticsServer(cfg.GUI().Theme, assetDir),
-		model:              m,
-		eventSub:           eventSub,
-		diskEventSub:       diskEventSub,
+		id:            id,
+		cfg:           cfg,
+		httpsCertFile: httpsCertFile,
+		httpsKeyFile:  httpsKeyFile,
+		statics:       newStaticsServer(cfg.GUI().Theme, assetDir),
+		model:         m,
+		eventSubs: map[events.EventType]events.BufferedSubscription{
+			defaultEventMask: defaultSub,
+			diskEventMask:    diskSub,
+		},
+		eventSubsMut:       sync.NewMutex(),
 		discoverer:         discoverer,
 		connectionsService: connectionsService,
 		systemConfigMut:    sync.NewMutex(),
@@ -131,6 +146,7 @@ func newAPIService(id protocol.DeviceID, cfg configIntf, httpsCertFile, httpsKey
 		startedOnce:        make(chan struct{}),
 		guiErrors:          errors,
 		systemLog:          systemLog,
+		cpu:                cpu,
 	}

 	return service
@@ -233,8 +249,8 @@ func (s *apiService) Serve() {
 	getRestMux.HandleFunc("/rest/db/need", s.getDBNeed)                          // folder [perpage] [page]
 	getRestMux.HandleFunc("/rest/db/status", s.getDBStatus)                      // folder
 	getRestMux.HandleFunc("/rest/db/browse", s.getDBBrowse)                      // folder [prefix] [dirsonly] [levels]
-	getRestMux.HandleFunc("/rest/events", s.getIndexEvents)                      // since [limit]
-	getRestMux.HandleFunc("/rest/events/disk", s.getDiskEvents)                  // since [limit]
+	getRestMux.HandleFunc("/rest/events", s.getIndexEvents)                      // [since] [limit] [timeout] [events]
+	getRestMux.HandleFunc("/rest/events/disk", s.getDiskEvents)                  // [since] [limit] [timeout]
 	getRestMux.HandleFunc("/rest/stats/device", s.getDeviceStats)                // -
 	getRestMux.HandleFunc("/rest/stats/folder", s.getFolderStats)                // -
 	getRestMux.HandleFunc("/rest/svc/deviceid", s.getDeviceID)                   // id
@@ -269,8 +285,8 @@ func (s *apiService) Serve() {
 	postRestMux.HandleFunc("/rest/system/restart", s.postSystemRestart)            // -
 	postRestMux.HandleFunc("/rest/system/shutdown", s.postSystemShutdown)          // -
 	postRestMux.HandleFunc("/rest/system/upgrade", s.postSystemUpgrade)            // -
-	postRestMux.HandleFunc("/rest/system/pause", s.makeDevicePauseHandler(true))   // device
-	postRestMux.HandleFunc("/rest/system/resume", s.makeDevicePauseHandler(false)) // device
+	postRestMux.HandleFunc("/rest/system/pause", s.makeDevicePauseHandler(true))   // [device]
+	postRestMux.HandleFunc("/rest/system/resume", s.makeDevicePauseHandler(false)) // [device]
 	postRestMux.HandleFunc("/rest/system/debug", s.postSystemDebug)                // [enable] [disable]

 	// Debug endpoints, not for general use
@@ -343,7 +359,7 @@ func (s *apiService) Serve() {
 		s.started <- listener.Addr().String()
 	}

-	// Indicate successfull initial startup, to ourselves and to interested
+	// Indicate successful initial startup, to ourselves and to interested
 	// listeners (i.e. the thing that starts the browser).
 	select {
 	case <-s.startedOnce:
@@ -836,9 +852,6 @@ func (s *apiService) flushResponse(resp string, w http.ResponseWriter) {
 	f.Flush()
 }

-var cpuUsagePercent [10]float64 // The last ten seconds
-var cpuUsageLock = sync.NewRWMutex()
-
 func (s *apiService) getSystemStatus(w http.ResponseWriter, r *http.Request) {
 	var m runtime.MemStats
 	runtime.ReadMemStats(&m)
@@ -865,14 +878,9 @@ func (s *apiService) getSystemStatus(w http.ResponseWriter, r *http.Request) {
 	}

 	res["connectionServiceStatus"] = s.connectionsService.Status()
-
-	cpuUsageLock.RLock()
-	var cpusum float64
-	for _, p := range cpuUsagePercent {
-		cpusum += p
-	}
-	cpuUsageLock.RUnlock()
-	res["cpuPercent"] = cpusum / float64(len(cpuUsagePercent)) / float64(runtime.NumCPU())
+	// cpuUsage.Rate() is in milliseconds per second, so dividing by ten
+	// gives us percent
+	res["cpuPercent"] = s.cpu.Rate() / 10 / float64(runtime.NumCPU())
 	res["pathSeparator"] = string(filepath.Separator)
 	res["uptime"] = int(time.Since(startTime).Seconds())
 	res["startTime"] = startTime
@@ -968,7 +976,9 @@ func (s *apiService) getRandomString(w http.ResponseWriter, r *http.Request) {
 func (s *apiService) getDBIgnores(w http.ResponseWriter, r *http.Request) {
 	qs := r.URL.Query()

-	ignores, patterns, err := s.model.GetIgnores(qs.Get("folder"))
+	folder := qs.Get("folder")
+
+	ignores, patterns, err := s.model.GetIgnores(folder)
 	if err != nil {
 		http.Error(w, err.Error(), 500)
 		return
@@ -1008,20 +1018,29 @@ func (s *apiService) postDBIgnores(w http.ResponseWriter, r *http.Request) {

 func (s *apiService) getIndexEvents(w http.ResponseWriter, r *http.Request) {
 	s.fss.gotEventRequest()
-	s.getEvents(w, r, s.eventSub)
+	mask := s.getEventMask(r.URL.Query().Get("events"))
+	sub := s.getEventSub(mask)
+	s.getEvents(w, r, sub)
 }

 func (s *apiService) getDiskEvents(w http.ResponseWriter, r *http.Request) {
-	s.getEvents(w, r, s.diskEventSub)
+	sub := s.getEventSub(diskEventMask)
+	s.getEvents(w, r, sub)
 }

 func (s *apiService) getEvents(w http.ResponseWriter, r *http.Request, eventSub events.BufferedSubscription) {
 	qs := r.URL.Query()
 	sinceStr := qs.Get("since")
 	limitStr := qs.Get("limit")
+	timeoutStr := qs.Get("timeout")
 	since, _ := strconv.Atoi(sinceStr)
 	limit, _ := strconv.Atoi(limitStr)

+	timeout := defaultEventTimeout
+	if timeoutSec, timeoutErr := strconv.Atoi(timeoutStr); timeoutErr == nil && timeoutSec >= 0 { // 0 is a valid timeout
+		timeout = time.Duration(timeoutSec) * time.Second
+	}
+
 	// Flush before blocking, to indicate that we've received the request and
 	// that it should not be retried. Must set Content-Type header before
 	// flushing.
@@ -1029,7 +1048,8 @@ func (s *apiService) getEvents(w http.ResponseWriter, r *http.Request, eventSub
 	f := w.(http.Flusher)
 	f.Flush()

-	evs := eventSub.Since(since, nil)
+	// If there are no events available return an empty slice, as this gets serialized as `[]`
+	evs := eventSub.Since(since, []events.Event{}, timeout)
 	if 0 < limit && limit < len(evs) {
 		evs = evs[len(evs)-limit:]
 	}
@@ -1037,12 +1057,38 @@ func (s *apiService) getEvents(w http.ResponseWriter, r *http.Request, eventSub
 	sendJSON(w, evs)
 }

+func (s *apiService) getEventMask(evs string) events.EventType {
+	eventMask := defaultEventMask
+	if evs != "" {
+		eventList := strings.Split(evs, ",")
+		eventMask = 0
+		for _, ev := range eventList {
+			eventMask |= events.UnmarshalEventType(strings.TrimSpace(ev))
+		}
+	}
+	return eventMask
+}
+
+func (s *apiService) getEventSub(mask events.EventType) events.BufferedSubscription {
+	s.eventSubsMut.Lock()
+	bufsub, ok := s.eventSubs[mask]
+	if !ok {
+		evsub := events.Default.Subscribe(mask)
+		bufsub = events.NewBufferedSubscription(evsub, eventSubBufferSize)
+		s.eventSubs[mask] = bufsub
+	}
+	s.eventSubsMut.Unlock()
+
+	return bufsub
+}
+
 func (s *apiService) getSystemUpgrade(w http.ResponseWriter, r *http.Request) {
-	if noUpgrade {
+	if noUpgradeFromEnv {
 		http.Error(w, upgrade.ErrUpgradeUnsupported.Error(), 500)
 		return
 	}
-	rel, err := upgrade.LatestRelease(s.cfg.Options().ReleasesURL, Version)
+	opts := s.cfg.Options()
+	rel, err := upgrade.LatestRelease(opts.ReleasesURL, Version, opts.UpgradeToPreReleases)
 	if err != nil {
 		http.Error(w, err.Error(), 500)
 		return
@@ -1083,7 +1129,8 @@ func (s *apiService) getLang(w http.ResponseWriter, r *http.Request) {
 }

 func (s *apiService) postSystemUpgrade(w http.ResponseWriter, r *http.Request) {
-	rel, err := upgrade.LatestRelease(s.cfg.Options().ReleasesURL, Version)
+	opts := s.cfg.Options()
+	rel, err := upgrade.LatestRelease(opts.ReleasesURL, Version, opts.UpgradeToPreReleases)
 	if err != nil {
 		l.Warnln("getting latest release:", err)
 		http.Error(w, err.Error(), 500)
@@ -1109,19 +1156,31 @@ func (s *apiService) makeDevicePauseHandler(paused bool) http.HandlerFunc {
 		var qs = r.URL.Query()
 		var deviceStr = qs.Get("device")

-		device, err := protocol.DeviceIDFromString(deviceStr)
-		if err != nil {
-			http.Error(w, err.Error(), 500)
-			return
+		var cfgs []config.DeviceConfiguration
+
+		if deviceStr == "" {
+			for _, cfg := range s.cfg.Devices() {
+				cfg.Paused = paused
+				cfgs = append(cfgs, cfg)
+			}
+		} else {
+			device, err := protocol.DeviceIDFromString(deviceStr)
+			if err != nil {
+				http.Error(w, err.Error(), 500)
+				return
+			}
+
+			cfg, ok := s.cfg.Devices()[device]
+			if !ok {
+				http.Error(w, "not found", http.StatusNotFound)
+				return
+			}
+
+			cfg.Paused = paused
+			cfgs = append(cfgs, cfg)
 		}

-		cfg, ok := s.cfg.Devices()[device]
-		if !ok {
-			http.Error(w, "not found", http.StatusNotFound)
-		}
-
-		cfg.Paused = paused
-		if err := s.cfg.SetDevice(cfg); err != nil {
+		if err := s.cfg.SetDevices(cfgs); err != nil {
 			http.Error(w, err.Error(), 500)
 		}
 	}
@@ -1131,18 +1190,17 @@ func (s *apiService) postDBScan(w http.ResponseWriter, r *http.Request) {
 	qs := r.URL.Query()
 	folder := qs.Get("folder")
 	if folder != "" {
+		subs := qs["sub"]
+		err := s.model.ScanFolderSubdirs(folder, subs)
+		if err != nil {
+			http.Error(w, err.Error(), 500)
+			return
+		}
 		nextStr := qs.Get("next")
 		next, err := strconv.Atoi(nextStr)
 		if err == nil {
 			s.model.DelayScan(folder, time.Duration(next)*time.Second)
 		}
-
-		subs := qs["sub"]
-		err = s.model.ScanFolderSubdirs(folder, subs)
-		if err != nil {
-			http.Error(w, err.Error(), 500)
-			return
-		}
 	} else {
 		errors := s.model.ScanFolders()
 		if len(errors) > 0 {
--- a/cmd/syncthing/gui_auth.go
+++ b/cmd/syncthing/gui_auth.go
@@ -2,7 +2,7 @@
 //
 // This Source Code Form is subject to the terms of the Mozilla Public
 // License, v. 2.0. If a copy of the MPL was not distributed with this file,
-// You can obtain one at http://mozilla.org/MPL/2.0/.
+// You can obtain one at https://mozilla.org/MPL/2.0/.

 package main

--- a/cmd/syncthing/gui_csrf.go
+++ b/cmd/syncthing/gui_csrf.go
@@ -2,7 +2,7 @@
 //
 // This Source Code Form is subject to the terms of the Mozilla Public
 // License, v. 2.0. If a copy of the MPL was not distributed with this file,
-// You can obtain one at http://mozilla.org/MPL/2.0/.
+// You can obtain one at https://mozilla.org/MPL/2.0/.

 package main

--- a/cmd/syncthing/gui_statics.go
+++ b/cmd/syncthing/gui_statics.go
@@ -2,7 +2,7 @@
 //
 // This Source Code Form is subject to the terms of the Mozilla Public
 // License, v. 2.0. If a copy of the MPL was not distributed with this file,
-// You can obtain one at http://mozilla.org/MPL/2.0/.
+// You can obtain one at https://mozilla.org/MPL/2.0/.

 package main

--- a/cmd/syncthing/gui_test.go
+++ b/cmd/syncthing/gui_test.go
@@ -2,7 +2,7 @@
 //
 // This Source Code Form is subject to the terms of the Mozilla Public
 // License, v. 2.0. If a copy of the MPL was not distributed with this file,
-// You can obtain one at http://mozilla.org/MPL/2.0/.
+// You can obtain one at https://mozilla.org/MPL/2.0/.

 package main

@@ -23,6 +23,7 @@ import (

 	"github.com/d4l3k/messagediff"
 	"github.com/syncthing/syncthing/lib/config"
+	"github.com/syncthing/syncthing/lib/events"
 	"github.com/syncthing/syncthing/lib/protocol"
 	"github.com/syncthing/syncthing/lib/sync"
 	"github.com/thejerf/suture"
@@ -70,7 +71,7 @@ func TestStopAfterBrokenConfig(t *testing.T) {
 	}
 	w := config.Wrap("/dev/null", cfg)

-	srv := newAPIService(protocol.LocalDeviceID, w, "../../test/h1/https-cert.pem", "../../test/h1/https-key.pem", "", nil, nil, nil, nil, nil, nil, nil)
+	srv := newAPIService(protocol.LocalDeviceID, w, "../../test/h1/https-cert.pem", "../../test/h1/https-key.pem", "", nil, nil, nil, nil, nil, nil, nil, nil)
 	srv.started = make(chan string)

 	sup := suture.NewSimple("test")
@@ -474,11 +475,12 @@ func startHTTP(cfg *mockedConfig) (string, error) {
 	connections := new(mockedConnections)
 	errorLog := new(mockedLoggerRecorder)
 	systemLog := new(mockedLoggerRecorder)
+	cpu := new(mockedCPUService)
 	addrChan := make(chan string)

 	// Instantiate the API service
 	svc := newAPIService(protocol.LocalDeviceID, cfg, httpsCertFile, httpsKeyFile, assetDir, model,
-		eventSub, diskEventSub, discoverer, connections, errorLog, systemLog)
+		eventSub, diskEventSub, discoverer, connections, errorLog, systemLog, cpu)
 	svc.started = addrChan

 	// Actually start the API service
@@ -924,3 +926,34 @@ func TestOptionsRequest(t *testing.T) {
 		t.Fatal("OPTIONS on /rest/system/status should return a 'Access-Control-Allow-Headers: Content-Type, X-API-KEY' header")
 	}
 }
+
+func TestEventMasks(t *testing.T) {
+	cfg := new(mockedConfig)
+	defSub := new(mockedEventSub)
+	diskSub := new(mockedEventSub)
+	svc := newAPIService(protocol.LocalDeviceID, cfg, "", "", "", nil, defSub, diskSub, nil, nil, nil, nil, nil)
+
+	if mask := svc.getEventMask(""); mask != defaultEventMask {
+		t.Errorf("incorrect default mask %x != %x", int64(mask), int64(defaultEventMask))
+	}
+
+	expected := events.FolderSummary | events.LocalChangeDetected
+	if mask := svc.getEventMask("FolderSummary,LocalChangeDetected"); mask != expected {
+		t.Errorf("incorrect parsed mask %x != %x", int64(mask), int64(expected))
+	}
+
+	expected = 0
+	if mask := svc.getEventMask("WeirdEvent,something else that doesn't exist"); mask != expected {
+		t.Errorf("incorrect parsed mask %x != %x", int64(mask), int64(expected))
+	}
+
+	if res := svc.getEventSub(defaultEventMask); res != defSub {
+		t.Errorf("should have returned the given default event sub")
+	}
+	if res := svc.getEventSub(diskEventMask); res != diskSub {
+		t.Errorf("should have returned the given disk event sub")
+	}
+	if res := svc.getEventSub(events.LocalIndexUpdated); res == nil || res == defSub || res == diskSub {
+		t.Errorf("should have returned a valid, non-default event sub")
+	}
+}
--- a/cmd/syncthing/gui_unix.go
+++ b/cmd/syncthing/gui_unix.go
@@ -1,37 +0,0 @@
-// Copyright (C) 2014 The Syncthing Authors.
-//
-// This Source Code Form is subject to the terms of the Mozilla Public
-// License, v. 2.0. If a copy of the MPL was not distributed with this file,
-// You can obtain one at http://mozilla.org/MPL/2.0/.
-
-//+build !windows,!solaris
-
-package main
-
-import (
-	"syscall"
-	"time"
-)
-
-func init() {
-	go trackCPUUsage()
-}
-
-func trackCPUUsage() {
-	var prevUsage int64
-	var prevTime = time.Now().UnixNano()
-	var rusage syscall.Rusage
-	for range time.NewTicker(time.Second).C {
-		syscall.Getrusage(syscall.RUSAGE_SELF, &rusage)
-		curTime := time.Now().UnixNano()
-		timeDiff := curTime - prevTime
-		curUsage := rusage.Utime.Nano() + rusage.Stime.Nano()
-		usageDiff := curUsage - prevUsage
-		cpuUsageLock.Lock()
-		copy(cpuUsagePercent[1:], cpuUsagePercent[0:])
-		cpuUsagePercent[0] = 100 * float64(usageDiff) / float64(timeDiff)
-		cpuUsageLock.Unlock()
-		prevTime = curTime
-		prevUsage = curUsage
-	}
-}
--- a/cmd/syncthing/gui_windows.go
+++ b/cmd/syncthing/gui_windows.go
@@ -1,58 +0,0 @@
-// Copyright (C) 2014 The Syncthing Authors.
-//
-// This Source Code Form is subject to the terms of the Mozilla Public
-// License, v. 2.0. If a copy of the MPL was not distributed with this file,
-// You can obtain one at http://mozilla.org/MPL/2.0/.
-
-//+build windows
-
-package main
-
-import (
-	"syscall"
-	"time"
-)
-
-func init() {
-	go trackCPUUsage()
-}
-
-func trackCPUUsage() {
-	handle, err := syscall.GetCurrentProcess()
-	if err != nil {
-		l.Warnln("Cannot track CPU usage:", err)
-		return
-	}
-
-	var ctime, etime, ktime, utime syscall.Filetime
-	err = syscall.GetProcessTimes(handle, &ctime, &etime, &ktime, &utime)
-	if err != nil {
-		l.Warnln("Cannot track CPU usage:", err)
-		return
-	}
-
-	prevTime := ctime.Nanoseconds()
-	prevUsage := ktime.Nanoseconds() + utime.Nanoseconds() // Always overflows
-
-	for range time.NewTicker(time.Second).C {
-		err := syscall.GetProcessTimes(handle, &ctime, &etime, &ktime, &utime)
-		if err != nil {
-			continue
-		}
-
-		curTime := time.Now().UnixNano()
-		timeDiff := curTime - prevTime
-		// This is sometimes 0, no clue why.
-		if timeDiff == 0 {
-			continue
-		}
-		curUsage := ktime.Nanoseconds() + utime.Nanoseconds()
-		usageDiff := curUsage - prevUsage
-		cpuUsageLock.Lock()
-		copy(cpuUsagePercent[1:], cpuUsagePercent[0:])
-		cpuUsagePercent[0] = 100 * float64(usageDiff) / float64(timeDiff)
-		cpuUsageLock.Unlock()
-		prevTime = curTime
-		prevUsage = curUsage
-	}
-}
--- a/cmd/syncthing/heapprof.go
+++ b/cmd/syncthing/heapprof.go
@@ -2,7 +2,7 @@
 //
 // This Source Code Form is subject to the terms of the Mozilla Public
 // License, v. 2.0. If a copy of the MPL was not distributed with this file,
-// You can obtain one at http://mozilla.org/MPL/2.0/.
+// You can obtain one at https://mozilla.org/MPL/2.0/.

 package main

--- a/cmd/syncthing/locations.go
+++ b/cmd/syncthing/locations.go
@@ -2,7 +2,7 @@
 //
 // This Source Code Form is subject to the terms of the Mozilla Public
 // License, v. 2.0. If a copy of the MPL was not distributed with this file,
-// You can obtain one at http://mozilla.org/MPL/2.0/.
+// You can obtain one at https://mozilla.org/MPL/2.0/.

 package main

--- a/cmd/syncthing/main.go
+++ b/cmd/syncthing/main.go
@@ -2,7 +2,7 @@
 //
 // This Source Code Form is subject to the terms of the Mozilla Public
 // License, v. 2.0. If a copy of the MPL was not distributed with this file,
-// You can obtain one at http://mozilla.org/MPL/2.0/.
+// You can obtain one at https://mozilla.org/MPL/2.0/.

 package main

@@ -12,6 +12,7 @@ import (
 	"errors"
 	"flag"
 	"fmt"
+	"io"
 	"io/ioutil"
 	"log"
 	"net"
@@ -42,9 +43,9 @@ import (
 	"github.com/syncthing/syncthing/lib/protocol"
 	"github.com/syncthing/syncthing/lib/rand"
 	"github.com/syncthing/syncthing/lib/sha256"
-	"github.com/syncthing/syncthing/lib/symlinks"
 	"github.com/syncthing/syncthing/lib/tlsutil"
 	"github.com/syncthing/syncthing/lib/upgrade"
+	"github.com/syncthing/syncthing/lib/weakhash"

 	"github.com/thejerf/suture"

@@ -59,8 +60,10 @@ var (
 	BuildHost         = "unknown"
 	BuildUser         = "unknown"
 	IsRelease         bool
+	IsCandidate       bool
 	IsBeta            bool
 	LongVersion       string
+	BuildTags         []string
 	allowedVersionExp = regexp.MustCompile(`^v\d+\.\d+\.\d+(-[a-z0-9]+)*(\.\d+)*(\+\d+-g[0-9a-f]+)?(-[^\s]+)?$`)
 )

@@ -77,7 +80,7 @@ const (
 	tlsDefaultCommonName = "syncthing"
 	httpsRSABits         = 2048
 	bepRSABits           = 0 // 384 bit ECDSA used instead
-	pingEventInterval    = time.Minute
+	defaultEventTimeout  = time.Minute
 	maxSystemErrors      = 5
 	initialSystemLog     = 10
 	maxSystemLog         = 250
@@ -97,15 +100,26 @@ func init() {
 			l.Fatalf("Invalid version string %q;\n\tdoes not match regexp %v", Version, allowedVersionExp)
 		}
 	}
+}

-	// Check for a clean release build. A release is something like "v0.1.2",
-	// with an optional suffix of letters and dot separated numbers like
-	// "-beta3.47". If there's more stuff, like a plus sign and a commit hash
-	// and so on, then it's not a release. If there's a dash anywhere in
-	// there, it's some kind of beta or prerelease version.
+func setBuildMetadata() {
+	// Check for a clean release build. A release is something like
+	// "v0.1.2", with an optional suffix of letters and dot separated
+	// numbers like "-beta3.47". If there's more stuff, like a plus sign and
+	// a commit hash and so on, then it's not a release. If it has a dash in
+	// it, it's some sort of beta, release candidate or special build. If it
+	// has "-rc." in it, like "v0.14.35-rc.42", then it's a candidate build.
+	//
+	// So, every build that is not a stable release build has IsBeta = true.
+	// This is used to enable some extra debugging (the deadlock detector).
+	//
+	// Release candidate builds are also "betas" from this point of view and
+	// will have that debugging enabled. In addition, some features are
+	// forced for release candidates - auto upgrade, and usage reporting.

 	exp := regexp.MustCompile(`^v\d+\.\d+\.\d+(-[a-z]+[\d\.]+)?$`)
 	IsRelease = exp.MatchString(Version)
+	IsCandidate = strings.Contains(Version, "-rc.")
 	IsBeta = strings.Contains(Version, "-")

 	stamp, _ := strconv.Atoi(BuildStamp)
@@ -113,6 +127,10 @@ func init() {

 	date := BuildDate.UTC().Format("2006-01-02 15:04:05 MST")
 	LongVersion = fmt.Sprintf(`syncthing %s "%s" (%s %s-%s) %s@%s %s`, Version, Codename, runtime.Version(), runtime.GOOS, runtime.GOARCH, BuildUser, BuildHost, date)
+
+	if len(BuildTags) > 0 {
+		LongVersion = fmt.Sprintf("%s [%s]", LongVersion, strings.Join(BuildTags, ", "))
+	}
 }

 var (
@@ -140,11 +158,11 @@ show time only (2).
 Development Settings
 --------------------

-The following environment variables modify syncthing's behavior in ways that
+The following environment variables modify Syncthing's behavior in ways that
 are mostly useful for developers. Use with care.

 STNODEFAULTFOLDER Don't create a default folder when starting for the first
-                   time.  This variable will be ignored anytime after the first
+                   time. This variable will be ignored anytime after the first
                   run.

 STGUIASSETS       Directory to load GUI assets from. Overrides compiled in
@@ -153,8 +171,8 @@ are mostly useful for developers. Use with care.
 STTRACE           A comma separated string of facilities to trace. The valid
                   facility strings listed below.

- STPROFILER        Set to a listen address such as "127.0.0.1:9090" to start the
-                   profiler with HTTP access.
+ STPROFILER        Set to a listen address such as "127.0.0.1:9090" to start
+                   the profiler with HTTP access.

 STCPUPROFILE      Write a CPU profile to cpu-$pid.pprof on exit.

@@ -167,6 +185,20 @@ are mostly useful for developers. Use with care.
 STPERFSTATS       Write running performance statistics to perf-$pid.csv. Not
                   supported on Windows.

+ STDEADLOCK        Used for debugging internal deadlocks. Use only under
+                   direction of a developer.
+
+ STDEADLOCKTIMEOUT Used for debugging internal deadlocks; sets debug
+                   sensitivity. Use only under direction of a developer.
+
+ STDEADLOCKTHRESHOLD Used for debugging internal deadlocks; sets debug
+                     sensitivity.  Use only under direction of a developer.
+
+ STNORESTART       Equivalent to the -no-restart argument. Disable the
+                   Syncthing monitor process which handles restarts for some
+                   configuration changes, upgrades, crashes and also log file
+                   writing (stdout is still written).
+
 STNOUPGRADE       Disable automatic upgrades.

 STHASHING         Select the SHA256 hashing package to use. Possible values
@@ -179,7 +211,7 @@ are mostly useful for developers. Use with care.

 GOGC              Percentage of heap growth at which to trigger GC. Default is
                   100. Lower numbers keep peak memory usage down, at the price
-                   of CPU usage (ie. performance).
+                   of CPU usage (i.e. performance).


 Debugging Facilities
@@ -192,9 +224,9 @@ The following are valid values for the STTRACE variable:

 // Environment options
 var (
-	noUpgrade       = os.Getenv("STNOUPGRADE") != ""
-	innerProcess    = os.Getenv("STNORESTART") != "" || os.Getenv("STMONITORED") != ""
-	noDefaultFolder = os.Getenv("STNODEFAULTFOLDER") != ""
+	noUpgradeFromEnv = os.Getenv("STNOUPGRADE") != ""
+	innerProcess     = os.Getenv("STNORESTART") != "" || os.Getenv("STMONITORED") != ""
+	noDefaultFolder  = os.Getenv("STNODEFAULTFOLDER") != ""
 )

 type RuntimeOptions struct {
@@ -211,6 +243,7 @@ type RuntimeOptions struct {
 	hideConsole    bool
 	logFile        string
 	auditEnabled   bool
+	auditFile      string
 	verbose        bool
 	paused         bool
 	unpaused       bool
@@ -236,7 +269,7 @@ func defaultRuntimeOptions() RuntimeOptions {
 	}

 	if os.Getenv("STTRACE") != "" {
-		options.logFlags = log.Ltime | log.Ldate | log.Lmicroseconds | log.Lshortfile
+		options.logFlags = logger.DebugFlags
 	}

 	if runtime.GOOS != "windows" {
@@ -260,7 +293,7 @@ func parseCommandLineOptions() RuntimeOptions {
 	flag.IntVar(&options.logFlags, "logflags", options.logFlags, "Select information in log line prefix (see below)")
 	flag.BoolVar(&options.noBrowser, "no-browser", false, "Do not start browser")
 	flag.BoolVar(&options.browserOnly, "browser-only", false, "Open GUI in browser")
-	flag.BoolVar(&options.noRestart, "no-restart", options.noRestart, "Do not restart; just exit")
+	flag.BoolVar(&options.noRestart, "no-restart", options.noRestart, "Disable monitor process, managed restarts and log file writing")
 	flag.BoolVar(&options.resetDatabase, "reset-database", false, "Reset the database, forcing a full rescan and resync")
 	flag.BoolVar(&options.resetDeltaIdxs, "reset-deltas", false, "Reset delta index IDs, forcing a full index exchange")
 	flag.BoolVar(&options.doUpgrade, "upgrade", false, "Perform upgrade")
@@ -273,6 +306,7 @@ func parseCommandLineOptions() RuntimeOptions {
 	flag.BoolVar(&options.paused, "paused", false, "Start with all devices and folders paused")
 	flag.BoolVar(&options.unpaused, "unpaused", false, "Start with all devices and folders unpaused")
 	flag.StringVar(&options.logFile, "logfile", options.logFile, "Log file name (use \"-\" for stdout)")
+	flag.StringVar(&options.auditFile, "auditfile", options.auditFile, "Specify audit file (use \"-\" for stdout, \"--\" for stderr)")
 	if runtime.GOOS == "windows" {
 		// Allow user to hide the console window
 		flag.BoolVar(&options.hideConsole, "no-console", false, "Hide console window")
@@ -291,6 +325,8 @@ func parseCommandLineOptions() RuntimeOptions {
 }

 func main() {
+	setBuildMetadata()
+
 	options := parseCommandLineOptions()
 	l.SetFlags(options.logFlags)

@@ -303,12 +339,27 @@ func main() {
 		os.Setenv("STGUIAPIKEY", options.guiAPIKey)
 	}

+	// Check for options which are not compatible with each other. We have
+	// to check logfile before it's set to the default below - we only want
+	// to complain if they set -logfile explicitly, not if it's set to its
+	// default location
+	if options.noRestart && (options.logFile != "" && options.logFile != "-") {
+		l.Fatalln("-logfile may not be used with -no-restart or STNORESTART")
+	}
+
 	if options.hideConsole {
 		osutil.HideConsole()
 	}

 	if options.confDir != "" {
 		// Not set as default above because the string can be really long.
+		if !filepath.IsAbs(options.confDir) {
+			var err error
+			options.confDir, err = filepath.Abs(options.confDir)
+			if err != nil {
+				l.Fatalln(err)
+			}
+		}
 		baseDirs["config"] = options.confDir
 	}

@@ -376,7 +427,7 @@ func main() {
 		return
 	}

-	if options.noRestart {
+	if innerProcess || options.noRestart {
 		syncthingMain(options)
 	} else {
 		monitorMain(options)
@@ -456,8 +507,8 @@ func debugFacilities() string {

 func checkUpgrade() upgrade.Release {
 	cfg, _ := loadConfig()
-	releasesURL := cfg.Options().ReleasesURL
-	release, err := upgrade.LatestRelease(releasesURL, Version)
+	opts := cfg.Options()
+	release, err := upgrade.LatestRelease(opts.ReleasesURL, Version, opts.UpgradeToPreReleases)
 	if err != nil {
 		l.Fatalln("Upgrade:", err)
 	}
@@ -545,7 +596,7 @@ func syncthingMain(runtimeOptions RuntimeOptions) {
 	l.SetPrefix("[start] ")

 	if runtimeOptions.auditEnabled {
-		startAuditing(mainService)
+		startAuditing(mainService, runtimeOptions.auditFile)
 	}

 	if runtimeOptions.verbose {
@@ -558,8 +609,8 @@ func syncthingMain(runtimeOptions RuntimeOptions) {
 	// Event subscription for the API; must start early to catch the early
 	// events. The LocalChangeDetected event might overwhelm the event
 	// receiver in some situations so we will not subscribe to it here.
-	apiSub := events.NewBufferedSubscription(events.Default.Subscribe(events.AllEvents&^events.LocalChangeDetected&^events.RemoteChangeDetected), 1000)
-	diskSub := events.NewBufferedSubscription(events.Default.Subscribe(events.LocalChangeDetected|events.RemoteChangeDetected), 1000)
+	defaultSub := events.NewBufferedSubscription(events.Default.Subscribe(defaultEventMask), eventSubBufferSize)
+	diskSub := events.NewBufferedSubscription(events.Default.Subscribe(diskEventMask), eventSubBufferSize)

 	if len(os.Getenv("GOMAXPROCS")) == 0 {
 		runtime.GOMAXPROCS(runtime.NumCPU())
@@ -570,7 +621,7 @@ func syncthingMain(runtimeOptions RuntimeOptions) {
 	// report the error if there is one.
 	osutil.MaximizeOpenFileLimit()

-	// Ensure that that we have a certificate and key.
+	// Ensure that we have a certificate and key.
 	cert, err := tls.LoadX509KeyPair(locations[locCertFile], locations[locKeyFile])
 	if err != nil {
 		l.Infof("Generating ECDSA key and certificate for %s...", tlsDefaultCommonName)
@@ -588,6 +639,10 @@ func syncthingMain(runtimeOptions RuntimeOptions) {

 	sha256.SelectAlgo()
 	sha256.Report()
+	perfWithWeakHash := cpuBench(3, 150*time.Millisecond, true)
+	l.Infof("Hashing performance with weak hash is %.02f MB/s", perfWithWeakHash)
+	perfWithoutWeakHash := cpuBench(3, 150*time.Millisecond, false)
+	l.Infof("Hashing performance without weak hash is %.02f MB/s", perfWithoutWeakHash)

 	// Emit the Starting event, now that we know who we are.

@@ -637,13 +692,22 @@ func syncthingMain(runtimeOptions RuntimeOptions) {
 		},
 	}

-	// If the read or write rate should be limited, set up a rate limiter for it.
-	// This will be used on connections created in the connect and listen routines.
-
 	opts := cfg.Options()

-	if !opts.SymlinksEnabled {
-		symlinks.Supported = false
+	if opts.WeakHashSelectionMethod == config.WeakHashAuto {
+		if perfWithoutWeakHash*0.8 > perfWithWeakHash {
+			l.Infof("Weak hash disabled, as it has an unacceptable performance impact.")
+			weakhash.Enabled = false
+		} else {
+			l.Infof("Weak hash enabled, as it has an acceptable performance impact.")
+			weakhash.Enabled = true
+		}
+	} else if opts.WeakHashSelectionMethod == config.WeakHashNever {
+		l.Infof("Disabling weak hash")
+		weakhash.Enabled = false
+	} else if opts.WeakHashSelectionMethod == config.WeakHashAlways {
+		l.Infof("Enabling weak hash")
+		weakhash.Enabled = true
 	}

 	if (opts.MaxRecvKbps > 0 || opts.MaxSendKbps > 0) && !opts.LimitBandwidthInLan {
@@ -698,8 +762,12 @@ func syncthingMain(runtimeOptions RuntimeOptions) {
 		// have been incorrectly ignore filtered.
 		ldb.DropDeltaIndexIDs()
 	}
+	if cfg.RawCopy().OriginalVersion < 19 {
+		// Converts old symlink types to new in the entire database.
+		ldb.ConvertSymlinkTypes()
+	}

-	m := model.NewModel(cfg, myID, myDeviceName(cfg), "syncthing", Version, ldb, protectedFiles)
+	m := model.NewModel(cfg, myID, "syncthing", Version, ldb, protectedFiles)

 	if t := os.Getenv("STDEADLOCKTIMEOUT"); len(t) > 0 {
 		it, err := strconv.Atoi(t)
@@ -719,6 +787,7 @@ func syncthingMain(runtimeOptions RuntimeOptions) {
 	// Add and start folders
 	for _, folderCfg := range cfg.Folders() {
 		if folderCfg.Paused {
+			folderCfg.CreateRoot()
 			continue
 		}
 		m.AddFolder(folderCfg)
@@ -772,7 +841,7 @@ func syncthingMain(runtimeOptions RuntimeOptions) {

 	// GUI

-	setupGUI(mainService, cfg, m, apiSub, diskSub, cachedDiscovery, connectionsService, errors, systemLog, runtimeOptions)
+	setupGUI(mainService, cfg, m, defaultSub, diskSub, cachedDiscovery, connectionsService, errors, systemLog, runtimeOptions)

 	if runtimeOptions.cpuProfile {
 		f, err := os.Create(fmt.Sprintf("cpu-%d.pprof", os.Getpid()))
@@ -788,20 +857,26 @@ func syncthingMain(runtimeOptions RuntimeOptions) {
 		}
 	}

+	// Candidate builds always run with usage reporting.
+
+	if IsCandidate {
+		l.Infoln("Anonymous usage reporting is always enabled for candidate releases.")
+		opts.URAccepted = usageReportVersion
+		// Unique ID will be set and config saved below if necessary.
+	}
+
 	if opts.URAccepted > 0 && opts.URAccepted < usageReportVersion {
 		l.Infoln("Anonymous usage report has changed; revoking acceptance")
 		opts.URAccepted = 0
 		opts.URUniqueID = ""
 		cfg.SetOptions(opts)
 	}
-	if opts.URAccepted >= usageReportVersion {
-		if opts.URUniqueID == "" {
-			// Previously the ID was generated from the node ID. We now need
-			// to generate a new one.
-			opts.URUniqueID = rand.String(8)
-			cfg.SetOptions(opts)
-			cfg.Save()
-		}
+
+	if opts.URAccepted >= usageReportVersion && opts.URUniqueID == "" {
+		// Generate and save a new unique ID if it is missing.
+		opts.URUniqueID = rand.String(8)
+		cfg.SetOptions(opts)
+		cfg.Save()
 	}

 	// The usageReportingManager registers itself to listen to configuration
@@ -813,18 +888,38 @@ func syncthingMain(runtimeOptions RuntimeOptions) {
 		go standbyMonitor()
 	}

+	// Candidate builds should auto upgrade. Make sure the option is set,
+	// unless we are in a build where it's disabled or the STNOUPGRADE
+	// environment variable is set.
+
+	if IsCandidate && !upgrade.DisabledByCompilation && !noUpgradeFromEnv {
+		l.Infoln("Automatic upgrade is always enabled for candidate releases.")
+		if opts.AutoUpgradeIntervalH == 0 || opts.AutoUpgradeIntervalH > 24 {
+			opts.AutoUpgradeIntervalH = 12
+			// Set the option into the config as well, as the auto upgrade
+			// loop expects to read a valid interval from there.
+			cfg.SetOptions(opts)
+			cfg.Save()
+		}
+		// We don't tweak the user's choice of upgrading to pre-releases or
+		// not, as otherwise they cannot step off the candidate channel.
+	}
+
 	if opts.AutoUpgradeIntervalH > 0 {
-		if noUpgrade {
+		if noUpgradeFromEnv {
 			l.Infof("No automatic upgrades; STNOUPGRADE environment variable defined.")
 		} else {
 			go autoUpgrade(cfg)
 		}
 	}

+	if isSuperUser() {
+		l.Warnln("Syncthing should not run as a privileged or system user. Please consider using a normal user account.")
+	}
+
 	events.Default.Log(events.StartupComplete, map[string]string{
 		"myID": myID.String(),
 	})
-	go generatePingEvents()

 	cleanConfigDirectory()

@@ -841,15 +936,6 @@ func syncthingMain(runtimeOptions RuntimeOptions) {
 	os.Exit(code)
 }

-func myDeviceName(cfg *config.Wrapper) string {
-	devices := cfg.Devices()
-	myName := devices[myID].Name
-	if myName == "" {
-		myName, _ = os.Hostname()
-	}
-	return myName
-}
-
 func setupSignalHandling() {
 	// Exit cleanly with "restarting" code on SIGHUP.

@@ -931,11 +1017,31 @@ func copyFile(src, dst string) error {
 	return nil
 }

-func startAuditing(mainService *suture.Supervisor) {
-	auditFile := timestampedLoc(locAuditLog)
-	fd, err := os.OpenFile(auditFile, os.O_WRONLY|os.O_CREATE|os.O_EXCL, 0600)
-	if err != nil {
-		l.Fatalln("Audit:", err)
+func startAuditing(mainService *suture.Supervisor, auditFile string) {
+
+	var fd io.Writer
+	var err error
+	var auditDest string
+	var auditFlags int
+
+	if auditFile == "-" {
+		fd = os.Stdout
+		auditDest = "stdout"
+	} else if auditFile == "--" {
+		fd = os.Stderr
+		auditDest = "stderr"
+	} else {
+		if auditFile == "" {
+			auditFile = timestampedLoc(locAuditLog)
+			auditFlags = os.O_WRONLY | os.O_CREATE | os.O_EXCL
+		} else {
+			auditFlags = os.O_WRONLY | os.O_CREATE | os.O_APPEND
+		}
+		fd, err = os.OpenFile(auditFile, auditFlags, 0600)
+		if err != nil {
+			l.Fatalln("Audit:", err)
+		}
+		auditDest = auditFile
 	}

 	auditService := newAuditService(fd)
@@ -945,10 +1051,10 @@ func startAuditing(mainService *suture.Supervisor) {
 	// ensure we capture all events from the start.
 	auditService.WaitForStart()

-	l.Infoln("Audit log in", auditFile)
+	l.Infoln("Audit log in", auditDest)
 }

-func setupGUI(mainService *suture.Supervisor, cfg *config.Wrapper, m *model.Model, apiSub events.BufferedSubscription, diskSub events.BufferedSubscription, discoverer discover.CachingMux, connectionsService *connections.Service, errors, systemLog logger.Recorder, runtimeOptions RuntimeOptions) {
+func setupGUI(mainService *suture.Supervisor, cfg *config.Wrapper, m *model.Model, defaultSub, diskSub events.BufferedSubscription, discoverer discover.CachingMux, connectionsService *connections.Service, errors, systemLog logger.Recorder, runtimeOptions RuntimeOptions) {
 	guiCfg := cfg.GUI()

 	if !guiCfg.Enabled {
@@ -959,13 +1065,16 @@ func setupGUI(mainService *suture.Supervisor, cfg *config.Wrapper, m *model.Mode
 		l.Warnln("Insecure admin access is enabled.")
 	}

-	api := newAPIService(myID, cfg, locations[locHTTPSCertFile], locations[locHTTPSKeyFile], runtimeOptions.assetDir, m, apiSub, diskSub, discoverer, connectionsService, errors, systemLog)
+	cpu := newCPUService()
+	mainService.Add(cpu)
+
+	api := newAPIService(myID, cfg, locations[locHTTPSCertFile], locations[locHTTPSKeyFile], runtimeOptions.assetDir, m, defaultSub, diskSub, discoverer, connectionsService, errors, systemLog, cpu)
 	cfg.Subscribe(api)
 	mainService.Add(api)

 	if cfg.Options().StartBrowser && !runtimeOptions.noBrowser && !runtimeOptions.stRestarting {
 		// Can potentially block if the utility we are invoking doesn't
-		// fork, and just execs, hence keep it in it's own routine.
+		// fork, and just execs, hence keep it in its own routine.
 		<-api.startedOnce
 		go openURL(guiCfg.URL())
 	}
@@ -979,7 +1088,7 @@ func defaultConfig(myName string) config.Configuration {
 		defaultFolder = config.NewFolderConfiguration("default", locations[locDefFolder])
 		defaultFolder.Label = "Default Folder"
 		defaultFolder.RescanIntervalS = 60
-		defaultFolder.MinDiskFreePct = 1
+		defaultFolder.MinDiskFree = config.Size{Value: 1, Unit: "%"}
 		defaultFolder.Devices = []config.FolderDeviceConfiguration{{DeviceID: myID}}
 		defaultFolder.AutoNormalize = true
 		defaultFolder.MaxConflicts = -1
@@ -1018,13 +1127,6 @@ func defaultConfig(myName string) config.Configuration {
 	return newCfg
 }

-func generatePingEvents() {
-	for {
-		time.Sleep(pingEventInterval)
-		events.Default.Log(events.Ping, nil)
-	}
-}
-
 func resetDB() error {
 	return os.RemoveAll(locations[locDatabase])
 }
@@ -1115,7 +1217,15 @@ func autoUpgrade(cfg *config.Wrapper) {
 		case <-timer.C:
 		}

-		rel, err := upgrade.LatestRelease(cfg.Options().ReleasesURL, Version)
+		opts := cfg.Options()
+		checkInterval := time.Duration(opts.AutoUpgradeIntervalH) * time.Hour
+		if checkInterval < time.Hour {
+			// We shouldn't be here if AutoUpgradeIntervalH < 1, but for
+			// safety's sake.
+			checkInterval = time.Hour
+		}
+
+		rel, err := upgrade.LatestRelease(opts.ReleasesURL, Version, opts.UpgradeToPreReleases)
 		if err == upgrade.ErrUpgradeUnsupported {
 			events.Default.Unsubscribe(sub)
 			return
@@ -1124,13 +1234,13 @@ func autoUpgrade(cfg *config.Wrapper) {
 			// Don't complain too loudly here; we might simply not have
 			// internet connectivity, or the upgrade server might be down.
 			l.Infoln("Automatic upgrade:", err)
-			timer.Reset(time.Duration(cfg.Options().AutoUpgradeIntervalH) * time.Hour)
+			timer.Reset(checkInterval)
 			continue
 		}

 		if upgrade.CompareVersions(rel.Tag, Version) != upgrade.Newer {
 			// Skip equal, older or majorly newer (incompatible) versions
-			timer.Reset(time.Duration(cfg.Options().AutoUpgradeIntervalH) * time.Hour)
+			timer.Reset(checkInterval)
 			continue
 		}

@@ -1138,7 +1248,7 @@ func autoUpgrade(cfg *config.Wrapper) {
 		err = upgrade.To(rel)
 		if err != nil {
 			l.Warnln("Automatic upgrade:", err)
-			timer.Reset(time.Duration(cfg.Options().AutoUpgradeIntervalH) * time.Hour)
+			timer.Reset(checkInterval)
 			continue
 		}
 		events.Default.Unsubscribe(sub)
--- a/cmd/syncthing/main_test.go
+++ b/cmd/syncthing/main_test.go
@@ -2,7 +2,7 @@
 //
 // This Source Code Form is subject to the terms of the Mozilla Public
 // License, v. 2.0. If a copy of the MPL was not distributed with this file,
-// You can obtain one at http://mozilla.org/MPL/2.0/.
+// You can obtain one at https://mozilla.org/MPL/2.0/.

 package main

--- a/cmd/syncthing/memsize_darwin.go
+++ b/cmd/syncthing/memsize_darwin.go
@@ -2,7 +2,7 @@
 //
 // This Source Code Form is subject to the terms of the Mozilla Public
 // License, v. 2.0. If a copy of the MPL was not distributed with this file,
-// You can obtain one at http://mozilla.org/MPL/2.0/.
+// You can obtain one at https://mozilla.org/MPL/2.0/.

 package main

--- a/cmd/syncthing/memsize_linux.go
+++ b/cmd/syncthing/memsize_linux.go
@@ -2,7 +2,7 @@
 //
 // This Source Code Form is subject to the terms of the Mozilla Public
 // License, v. 2.0. If a copy of the MPL was not distributed with this file,
-// You can obtain one at http://mozilla.org/MPL/2.0/.
+// You can obtain one at https://mozilla.org/MPL/2.0/.

 package main

--- a/cmd/syncthing/memsize_netbsd.go
+++ b/cmd/syncthing/memsize_netbsd.go
@@ -2,7 +2,7 @@
 //
 // This Source Code Form is subject to the terms of the Mozilla Public
 // License, v. 2.0. If a copy of the MPL was not distributed with this file,
-// You can obtain one at http://mozilla.org/MPL/2.0/.
+// You can obtain one at https://mozilla.org/MPL/2.0/.

 package main

--- a/cmd/syncthing/memsize_solaris.go
+++ b/cmd/syncthing/memsize_solaris.go
@@ -2,7 +2,7 @@
 //
 // This Source Code Form is subject to the terms of the Mozilla Public
 // License, v. 2.0. If a copy of the MPL was not distributed with this file,
-// You can obtain one at http://mozilla.org/MPL/2.0/.
+// You can obtain one at https://mozilla.org/MPL/2.0/.

 // +build solaris

--- a/cmd/syncthing/memsize_unimpl.go
+++ b/cmd/syncthing/memsize_unimpl.go
@@ -2,7 +2,7 @@
 //
 // This Source Code Form is subject to the terms of the Mozilla Public
 // License, v. 2.0. If a copy of the MPL was not distributed with this file,
-// You can obtain one at http://mozilla.org/MPL/2.0/.
+// You can obtain one at https://mozilla.org/MPL/2.0/.

 // +build freebsd openbsd dragonfly

--- a/cmd/syncthing/memsize_windows.go
+++ b/cmd/syncthing/memsize_windows.go
@@ -2,7 +2,7 @@
 //
 // This Source Code Form is subject to the terms of the Mozilla Public
 // License, v. 2.0. If a copy of the MPL was not distributed with this file,
-// You can obtain one at http://mozilla.org/MPL/2.0/.
+// You can obtain one at https://mozilla.org/MPL/2.0/.

 package main

--- a/cmd/syncthing/mocked_config_test.go
+++ b/cmd/syncthing/mocked_config_test.go
@@ -2,13 +2,14 @@
 //
 // This Source Code Form is subject to the terms of the Mozilla Public
 // License, v. 2.0. If a copy of the MPL was not distributed with this file,
-// You can obtain one at http://mozilla.org/MPL/2.0/.
+// You can obtain one at https://mozilla.org/MPL/2.0/.

 package main

 import (
 	"github.com/syncthing/syncthing/lib/config"
 	"github.com/syncthing/syncthing/lib/protocol"
+	"github.com/syncthing/syncthing/lib/util"
 )

 type mockedConfig struct {
@@ -24,7 +25,9 @@ func (c *mockedConfig) ListenAddresses() []string {
 }

 func (c *mockedConfig) RawCopy() config.Configuration {
-	return config.Configuration{}
+	cfg := config.Configuration{}
+	util.SetDefaults(&cfg.Options)
+	return cfg
 }

 func (c *mockedConfig) Options() config.OptionsConfiguration {
@@ -49,6 +52,10 @@ func (c *mockedConfig) SetDevice(config.DeviceConfiguration) error {
 	return nil
 }

+func (c *mockedConfig) SetDevices([]config.DeviceConfiguration) error {
+	return nil
+}
+
 func (c *mockedConfig) Save() error {
 	return nil
 }
--- a/cmd/syncthing/mocked_connections_test.go
+++ b/cmd/syncthing/mocked_connections_test.go
@@ -2,7 +2,7 @@
 //
 // This Source Code Form is subject to the terms of the Mozilla Public
 // License, v. 2.0. If a copy of the MPL was not distributed with this file,
-// You can obtain one at http://mozilla.org/MPL/2.0/.
+// You can obtain one at https://mozilla.org/MPL/2.0/.

 package main

--- a/cmd/syncthing/mocked_cpuusage_test.go
+++ b/cmd/syncthing/mocked_cpuusage_test.go
@@ -0,0 +1,13 @@
+// Copyright (C) 2017 The Syncthing Authors.
+//
+// This Source Code Form is subject to the terms of the Mozilla Public
+// License, v. 2.0. If a copy of the MPL was not distributed with this file,
+// You can obtain one at https://mozilla.org/MPL/2.0/.
+
+package main
+
+type mockedCPUService struct{}
+
+func (*mockedCPUService) Rate() float64 {
+	return 42
+}
--- a/cmd/syncthing/mocked_discovery_test.go
+++ b/cmd/syncthing/mocked_discovery_test.go
@@ -2,7 +2,7 @@
 //
 // This Source Code Form is subject to the terms of the Mozilla Public
 // License, v. 2.0. If a copy of the MPL was not distributed with this file,
-// You can obtain one at http://mozilla.org/MPL/2.0/.
+// You can obtain one at https://mozilla.org/MPL/2.0/.

 package main

--- a/cmd/syncthing/mocked_events_test.go
+++ b/cmd/syncthing/mocked_events_test.go
@@ -2,14 +2,18 @@
 //
 // This Source Code Form is subject to the terms of the Mozilla Public
 // License, v. 2.0. If a copy of the MPL was not distributed with this file,
-// You can obtain one at http://mozilla.org/MPL/2.0/.
+// You can obtain one at https://mozilla.org/MPL/2.0/.

 package main

-import "github.com/syncthing/syncthing/lib/events"
+import (
+	"time"
+
+	"github.com/syncthing/syncthing/lib/events"
+)

 type mockedEventSub struct{}

-func (s *mockedEventSub) Since(id int, into []events.Event) []events.Event {
+func (s *mockedEventSub) Since(id int, into []events.Event, timeout time.Duration) []events.Event {
 	select {}
 }
--- a/cmd/syncthing/mocked_logger_test.go
+++ b/cmd/syncthing/mocked_logger_test.go
@@ -2,7 +2,7 @@
 //
 // This Source Code Form is subject to the terms of the Mozilla Public
 // License, v. 2.0. If a copy of the MPL was not distributed with this file,
-// You can obtain one at http://mozilla.org/MPL/2.0/.
+// You can obtain one at https://mozilla.org/MPL/2.0/.

 package main

--- a/cmd/syncthing/mocked_model_test.go
+++ b/cmd/syncthing/mocked_model_test.go
@@ -2,7 +2,7 @@
 //
 // This Source Code Form is subject to the terms of the Mozilla Public
 // License, v. 2.0. If a copy of the MPL was not distributed with this file,
-// You can obtain one at http://mozilla.org/MPL/2.0/.
+// You can obtain one at https://mozilla.org/MPL/2.0/.

 package main

--- a/cmd/syncthing/monitor.go
+++ b/cmd/syncthing/monitor.go
@@ -2,7 +2,7 @@
 //
 // This Source Code Form is subject to the terms of the Mozilla Public
 // License, v. 2.0. If a copy of the MPL was not distributed with this file,
-// You can obtain one at http://mozilla.org/MPL/2.0/.
+// You can obtain one at https://mozilla.org/MPL/2.0/.

 package main

@@ -35,8 +35,6 @@ const (
 )

 func monitorMain(runtimeOptions RuntimeOptions) {
-	os.Setenv("STNORESTART", "yes")
-	os.Setenv("STMONITORED", "yes")
 	l.SetPrefix("[monitor] ")

 	var dst io.Writer = os.Stdout
@@ -70,6 +68,8 @@ func monitorMain(runtimeOptions RuntimeOptions) {
 	sigHup := syscall.Signal(1)
 	signal.Notify(restartSign, sigHup)

+	childEnv := childEnv()
+	first := true
 	for {
 		if t := time.Since(restarts[0]); t < loopThreshold {
 			l.Warnf("%d restarts in %v; not retrying further", countRestarts, t)
@@ -80,6 +80,7 @@ func monitorMain(runtimeOptions RuntimeOptions) {
 		restarts[len(restarts)-1] = time.Now()

 		cmd := exec.Command(args[0], args[1:]...)
+		cmd.Env = childEnv

 		stderr, err := cmd.StderrPipe()
 		if err != nil {
@@ -97,10 +98,6 @@ func monitorMain(runtimeOptions RuntimeOptions) {
 			l.Fatalln(err)
 		}

-		// Let the next child process know that this is not the first time
-		// it's starting up.
-		os.Setenv("STRESTART", "yes")
-
 		stdoutMut.Lock()
 		stdoutFirstLines = make([]string, 0, 10)
 		stdoutLastLines = make([]string, 0, 50)
@@ -150,7 +147,6 @@ func monitorMain(runtimeOptions RuntimeOptions) {
 						// Restart the monitor process to release the .old
 						// binary as part of the upgrade process.
 						l.Infoln("Restarting monitor...")
-						os.Setenv("STNORESTART", "")
 						if err = restartMonitor(args); err != nil {
 							l.Warnln("Restart:", err)
 						}
@@ -162,6 +158,13 @@ func monitorMain(runtimeOptions RuntimeOptions) {

 		l.Infoln("Syncthing exited:", err)
 		time.Sleep(1 * time.Second)
+
+		if first {
+			// Let the next child process know that this is not the first time
+			// it's starting up.
+			childEnv = append(childEnv, "STRESTART=yes")
+			first = false
+		}
 	}
 }

@@ -410,3 +413,19 @@ func (f *autoclosedFile) closerLoop() {
 		}
 	}
 }
+
+// Returns the desired child environment, properly filtered and added to.
+func childEnv() []string {
+	var env []string
+	for _, str := range os.Environ() {
+		if strings.HasPrefix("STNORESTART=", str) {
+			continue
+		}
+		if strings.HasPrefix("STMONITORED=", str) {
+			continue
+		}
+		env = append(env, str)
+	}
+	env = append(env, "STMONITORED=yes")
+	return env
+}
--- a/cmd/syncthing/openurl_unix.go
+++ b/cmd/syncthing/openurl_unix.go
@@ -2,7 +2,7 @@
 //
 // This Source Code Form is subject to the terms of the Mozilla Public
 // License, v. 2.0. If a copy of the MPL was not distributed with this file,
-// You can obtain one at http://mozilla.org/MPL/2.0/.
+// You can obtain one at https://mozilla.org/MPL/2.0/.

 // +build !windows

--- a/cmd/syncthing/openurl_windows.go
+++ b/cmd/syncthing/openurl_windows.go
@@ -2,7 +2,7 @@
 //
 // This Source Code Form is subject to the terms of the Mozilla Public
 // License, v. 2.0. If a copy of the MPL was not distributed with this file,
-// You can obtain one at http://mozilla.org/MPL/2.0/.
+// You can obtain one at https://mozilla.org/MPL/2.0/.

 // +build windows

--- a/cmd/syncthing/perfstats_unix.go
+++ b/cmd/syncthing/perfstats_unix.go
@@ -2,7 +2,7 @@
 //
 // This Source Code Form is subject to the terms of the Mozilla Public
 // License, v. 2.0. If a copy of the MPL was not distributed with this file,
-// You can obtain one at http://mozilla.org/MPL/2.0/.
+// You can obtain one at https://mozilla.org/MPL/2.0/.

 // +build !solaris,!windows

--- a/cmd/syncthing/summaryservice.go
+++ b/cmd/syncthing/summaryservice.go
@@ -2,7 +2,7 @@
 //
 // This Source Code Form is subject to the terms of the Mozilla Public
 // License, v. 2.0. If a copy of the MPL was not distributed with this file,
-// You can obtain one at http://mozilla.org/MPL/2.0/.
+// You can obtain one at https://mozilla.org/MPL/2.0/.

 package main

@@ -169,7 +169,7 @@ func (c *folderSummaryService) foldersToHandle() []string {
 	c.lastEventReqMut.Lock()
 	last := c.lastEventReq
 	c.lastEventReqMut.Unlock()
-	if time.Since(last) > pingEventInterval {
+	if time.Since(last) > defaultEventTimeout {
 		return nil
 	}

--- a/cmd/syncthing/superuser_unix.go
+++ b/cmd/syncthing/superuser_unix.go
@@ -0,0 +1,17 @@
+// Copyright (C) 2017 The Syncthing Authors.
+//
+// This Source Code Form is subject to the terms of the Mozilla Public
+// License, v. 2.0. If a copy of the MPL was not distributed with this file,
+// You can obtain one at https://mozilla.org/MPL/2.0/.
+
+// +build !windows
+
+package main
+
+import (
+	"os"
+)
+
+func isSuperUser() bool {
+	return os.Geteuid() == 0
+}
--- a/cmd/syncthing/superuser_windows.go
+++ b/cmd/syncthing/superuser_windows.go
@@ -0,0 +1,41 @@
+// Copyright (C) 2017 The Syncthing Authors.
+//
+// This Source Code Form is subject to the terms of the Mozilla Public
+// License, v. 2.0. If a copy of the MPL was not distributed with this file,
+// You can obtain one at https://mozilla.org/MPL/2.0/.
+
+package main
+
+import "syscall"
+
+// https://msdn.microsoft.com/en-us/library/windows/desktop/aa379649(v=vs.85).aspx
+const securityLocalSystemRID = "S-1-5-18"
+
+func isSuperUser() bool {
+	tok, err := syscall.OpenCurrentProcessToken()
+	if err != nil {
+		l.Debugln("OpenCurrentProcessToken:", err)
+		return false
+	}
+	defer tok.Close()
+
+	user, err := tok.GetTokenUser()
+	if err != nil {
+		l.Debugln("GetTokenUser:", err)
+		return false
+	}
+
+	if user.User.Sid == nil {
+		l.Debugln("sid is nil")
+		return false
+	}
+
+	sid, err := user.User.Sid.String()
+	if err != nil {
+		l.Debugln("Sid.String():", err)
+		return false
+	}
+
+	l.Debugf("SID: %q", sid)
+	return sid == securityLocalSystemRID
+}
--- a/cmd/syncthing/traceback.go
+++ b/cmd/syncthing/traceback.go
@@ -2,7 +2,7 @@
 //
 // This Source Code Form is subject to the terms of the Mozilla Public
 // License, v. 2.0. If a copy of the MPL was not distributed with this file,
-// You can obtain one at http://mozilla.org/MPL/2.0/.
+// You can obtain one at https://mozilla.org/MPL/2.0/.

 //+build go1.7

--- a/cmd/syncthing/usage.go
+++ b/cmd/syncthing/usage.go
@@ -2,7 +2,7 @@
 //
 // This Source Code Form is subject to the terms of the Mozilla Public
 // License, v. 2.0. If a copy of the MPL was not distributed with this file,
-// You can obtain one at http://mozilla.org/MPL/2.0/.
+// You can obtain one at https://mozilla.org/MPL/2.0/.

 package main

--- a/cmd/syncthing/usage_report.go
+++ b/cmd/syncthing/usage_report.go
@@ -2,12 +2,13 @@
 //
 // This Source Code Form is subject to the terms of the Mozilla Public
 // License, v. 2.0. If a copy of the MPL was not distributed with this file,
-// You can obtain one at http://mozilla.org/MPL/2.0/.
+// You can obtain one at https://mozilla.org/MPL/2.0/.

 package main

 import (
 	"bytes"
+	"context"
 	"crypto/rand"
 	"crypto/tls"
 	"encoding/json"
@@ -22,7 +23,7 @@ import (
 	"github.com/syncthing/syncthing/lib/dialer"
 	"github.com/syncthing/syncthing/lib/model"
 	"github.com/syncthing/syncthing/lib/protocol"
-	"github.com/syncthing/syncthing/lib/sha256"
+	"github.com/syncthing/syncthing/lib/scanner"
 	"github.com/syncthing/syncthing/lib/upgrade"
 	"github.com/thejerf/suture"
 )
@@ -81,9 +82,10 @@ func (m *usageReportingManager) String() string {
 // reportData returns the data to be sent in a usage report. It's used in
 // various places, so not part of the usageReportingManager object.
 func reportData(cfg configIntf, m modelIntf) map[string]interface{} {
+	opts := cfg.Options()
 	res := make(map[string]interface{})
 	res["urVersion"] = usageReportVersion
-	res["uniqueID"] = cfg.Options().URUniqueID
+	res["uniqueID"] = opts.URUniqueID
 	res["version"] = Version
 	res["longVersion"] = LongVersion
 	res["platform"] = runtime.GOOS + "-" + runtime.GOARCH
@@ -112,7 +114,8 @@ func reportData(cfg configIntf, m modelIntf) map[string]interface{} {
 	var mem runtime.MemStats
 	runtime.ReadMemStats(&mem)
 	res["memoryUsageMiB"] = (mem.Sys - mem.HeapReleased) / 1024 / 1024
-	res["sha256Perf"] = cpuBench(5, 125*time.Millisecond)
+	res["sha256Perf"] = cpuBench(5, 125*time.Millisecond, false)
+	res["hashPerf"] = cpuBench(5, 125*time.Millisecond, true)

 	bytes, err := memorySize()
 	if err == nil {
@@ -188,7 +191,7 @@ func reportData(cfg configIntf, m modelIntf) map[string]interface{} {
 	res["deviceUses"] = deviceUses

 	defaultAnnounceServersDNS, defaultAnnounceServersIP, otherAnnounceServers := 0, 0, 0
-	for _, addr := range cfg.Options().GlobalAnnServers {
+	for _, addr := range opts.GlobalAnnServers {
 		if addr == "default" || addr == "default-v4" || addr == "default-v6" {
 			defaultAnnounceServersDNS++
 		} else {
@@ -196,8 +199,8 @@ func reportData(cfg configIntf, m modelIntf) map[string]interface{} {
 		}
 	}
 	res["announce"] = map[string]interface{}{
-		"globalEnabled":     cfg.Options().GlobalAnnEnabled,
-		"localEnabled":      cfg.Options().LocalAnnEnabled,
+		"globalEnabled":     opts.GlobalAnnEnabled,
+		"localEnabled":      opts.LocalAnnEnabled,
 		"defaultServersDNS": defaultAnnounceServersDNS,
 		"defaultServersIP":  defaultAnnounceServersIP,
 		"otherServers":      otherAnnounceServers,
@@ -218,10 +221,11 @@ func reportData(cfg configIntf, m modelIntf) map[string]interface{} {
 		"otherServers":   otherRelayServers,
 	}

-	res["usesRateLimit"] = cfg.Options().MaxRecvKbps > 0 || cfg.Options().MaxSendKbps > 0
+	res["usesRateLimit"] = opts.MaxRecvKbps > 0 || opts.MaxSendKbps > 0

-	res["upgradeAllowedManual"] = !(upgrade.DisabledByCompilation || noUpgrade)
-	res["upgradeAllowedAuto"] = !(upgrade.DisabledByCompilation || noUpgrade) && cfg.Options().AutoUpgradeIntervalH > 0
+	res["upgradeAllowedManual"] = !(upgrade.DisabledByCompilation || noUpgradeFromEnv)
+	res["upgradeAllowedAuto"] = !(upgrade.DisabledByCompilation || noUpgradeFromEnv) && opts.AutoUpgradeIntervalH > 0
+	res["upgradeAllowedPre"] = !(upgrade.DisabledByCompilation || noUpgradeFromEnv) && opts.AutoUpgradeIntervalH > 0 && opts.UpgradeToPreReleases

 	return res
 }
@@ -284,29 +288,31 @@ func (s *usageReportingService) Stop() {
 }

 // cpuBench returns CPU performance as a measure of single threaded SHA-256 MiB/s
-func cpuBench(iterations int, duration time.Duration) float64 {
+func cpuBench(iterations int, duration time.Duration, useWeakHash bool) float64 {
+	dataSize := 16 * protocol.BlockSize
+	bs := make([]byte, dataSize)
+	rand.Reader.Read(bs)
+
 	var perf float64
 	for i := 0; i < iterations; i++ {
-		if v := cpuBenchOnce(duration); v > perf {
+		if v := cpuBenchOnce(duration, useWeakHash, bs); v > perf {
 			perf = v
 		}
 	}
+	blocksResult = nil
 	return perf
 }

-func cpuBenchOnce(duration time.Duration) float64 {
-	chunkSize := 100 * 1 << 10
-	h := sha256.New()
-	bs := make([]byte, chunkSize)
-	rand.Reader.Read(bs)
+var blocksResult []protocol.BlockInfo // so the result is not optimized away

+func cpuBenchOnce(duration time.Duration, useWeakHash bool, bs []byte) float64 {
 	t0 := time.Now()
 	b := 0
 	for time.Since(t0) < duration {
-		h.Write(bs)
-		b += chunkSize
+		r := bytes.NewReader(bs)
+		blocksResult, _ = scanner.Blocks(context.TODO(), r, protocol.BlockSize, int64(len(bs)), nil, useWeakHash)
+		b += len(bs)
 	}
-	h.Sum(nil)
 	d := time.Since(t0)
 	return float64(int(float64(b)/d.Seconds()/(1<<20)*100)) / 100
 }
--- a/cmd/syncthing/verboseservice.go
+++ b/cmd/syncthing/verboseservice.go
@@ -2,7 +2,7 @@
 //
 // This Source Code Form is subject to the terms of the Mozilla Public
 // License, v. 2.0. If a copy of the MPL was not distributed with this file,
-// You can obtain one at http://mozilla.org/MPL/2.0/.
+// You can obtain one at https://mozilla.org/MPL/2.0/.

 package main

@@ -66,7 +66,7 @@ func (s *verboseService) WaitForStart() {

 func (s *verboseService) formatEvent(ev events.Event) string {
 	switch ev.Type {
-	case events.Ping, events.DownloadProgress, events.LocalIndexUpdated:
+	case events.DownloadProgress, events.LocalIndexUpdated:
 		// Skip
 		return ""

@@ -154,7 +154,7 @@ func (s *verboseService) formatEvent(ev events.Event) string {
 		if total > 0 {
 			pct = 100 * current / total
 		}
-		return fmt.Sprintf("Scanning folder %q, %d%% done (%.01f MB/s)", folder, pct, rate)
+		return fmt.Sprintf("Scanning folder %q, %d%% done (%.01f MiB/s)", folder, pct, rate)

 	case events.DevicePaused:
 		data := ev.Data.(map[string]string)
--- a/cmd/todos/main.go
+++ b/cmd/todos/main.go
@@ -2,7 +2,7 @@
 //
 // This Source Code Form is subject to the terms of the Mozilla Public
 // License, v. 2.0. If a copy of the MPL was not distributed with this file,
-// You can obtain one at http://mozilla.org/MPL/2.0/.
+// You can obtain one at https://mozilla.org/MPL/2.0/.

 // +build ignore

--- a/etc/linux-systemd/README.md
+++ b/etc/linux-systemd/README.md
@@ -5,4 +5,4 @@ This directory contains configuration files for running Syncthing under the
 systemd user service. For further documentation take a look at the [systemd
 section][1] on https://docs.syncthing.net.

-[1]: https://docs.syncthing.net/users/autostart.html#systemd
+[1]: https://docs.syncthing.net/users/autostart.html#using-systemd
--- a/etc/linux-systemd/system/syncthing-resume.service
+++ b/etc/linux-systemd/system/syncthing-resume.service
@@ -1,11 +1,11 @@
 [Unit]
 Description=Restart Syncthing after resume
 Documentation=man:syncthing(1)
-After=suspend.target
+After=sleep.target

 [Service]
 Type=oneshot
 ExecStart=-/usr/bin/pkill -HUP -x syncthing

 [Install]
-WantedBy=suspend.target
+WantedBy=sleep.target
--- a/etc/linux-upstart/README.md
+++ b/etc/linux-upstart/README.md
@@ -5,7 +5,7 @@ the "Upstart" service manager on Linux. To have syncthing start when you login
 place "user/syncthing.conf" in the "/home/[username]/.config/upstart/" folder.
 To have syncthing start when the system boots place "system/syncthing.conf"
 in the "/etc/init/" folder.
-To manualy start syncthing via Upstart when using the system configuration use:
+To manually start syncthing via Upstart when using the system configuration use:

 ```
    sudo initctl start syncthing
--- a/gui/default/assets/css/overrides.css
+++ b/gui/default/assets/css/overrides.css
@@ -3,7 +3,7 @@
 //
 // This Source Code Form is subject to the terms of the Mozilla Public
 // License, v. 2.0. If a copy of the MPL was not distributed with this file,
-// You can obtain one at http://mozilla.org/MPL/2.0/.
+// You can obtain one at https://mozilla.org/MPL/2.0/.

 */

@@ -100,9 +100,20 @@ ul+h5 {
    white-space: nowrap;
 }

+/* Removing text decoration on anchor link hover pull request: #4135 */
+.table td.small-data span a:hover {
+    text-decoration: none;
+}
+
 table.table-condensed {
    table-layout: fixed;
 }
+
+table.table-dynamic {
+    word-wrap: break-word;
+    word-break: break-all;
+}
+
 table.table-condensed td {
    overflow: hidden;
    text-overflow: ellipsis;
@@ -215,6 +226,13 @@ identicon {
    height: 1em;
 }

+a.toggler {
+    color: inherit;
+}
+a.toggler:hover {
+    border-bottom: 1px dashed;
+    text-decoration: none;
+}

 /**
 * Progress bars with centered text
@@ -253,6 +271,21 @@ ul.three-columns li, ul.two-columns li {
    z-index: 980;
 }

+.globalChanges-path-col {
+  /* These are technically the same, but use both */
+  overflow-wrap: break-word;
+  word-wrap: break-word;
+
+  -ms-word-break: break-all;
+  /* This is the dangerous one in WebKit, as it breaks things wherever */
+  word-break: break-all;
+  /* Instead use this non-standard one: */
+  word-break: break-word;
+}
+.globalChanges-time-col {
+    width: 100px;
+}
+
 /** Footer nav on small devices **/
@media (max-width: 1199px) {
    /* Stay at the end of the page, with space reserved for the footer
@@ -333,4 +366,4 @@ ul.three-columns li, ul.two-columns li {
    .navbar-fixed-bottom li {
         width: 100%;
    }
-}
+}
--- a/gui/default/assets/css/theme.css
+++ b/gui/default/assets/css/theme.css
@@ -3,7 +3,7 @@
 //
 // This Source Code Form is subject to the terms of the Mozilla Public
 // License, v. 2.0. If a copy of the MPL was not distributed with this file,
-// You can obtain one at http://mozilla.org/MPL/2.0/.
+// You can obtain one at https://mozilla.org/MPL/2.0/.

 */

--- a/gui/default/assets/lang/README-FIRST.txt
+++ b/gui/default/assets/lang/README-FIRST.txt
--- a/gui/default/assets/lang/lang-bg.json
+++ b/gui/default/assets/lang/lang-bg.json
@@ -4,11 +4,13 @@
    "A new major version may not be compatible with previous versions.": "Нова основна версия, която може да не е съвмеситима с предишни версии.",
    "API Key": "API Ключ",
    "About": "За програмата",
+    "Action": "Действие",
    "Actions": "Меню",
    "Add": "Добави",
    "Add Device": "Добави устройство",
    "Add Folder": "Добави папка",
    "Add Remote Device": "Добави ново устройство",
+    "Add devices from the introducer to our device list, for mutually shared folders.": "Добавяне на устройства от списъка на запознаващото устройтво в нашият списък с устройства, за взаимно споделени папки.",
    "Add new folder?": "Добави нова папка?",
    "Address": "Адрес",
    "Addresses": "Адреси",
@@ -17,16 +19,20 @@
    "Advanced settings": "Допълнителни настройки",
    "All Data": "Всички данни",
    "Allow Anonymous Usage Reporting?": "Разреши анонимно докладване за употребата на програмата?",
+    "Allowed Networks": "Разрешени мрежи",
    "Alphabetic": "Азбучен ред",
+    "An external command handles the versioning. It has to remove the file from the shared folder.": "Друга команда се занимава с версиите. Тази команда трябва да премахне файла от синхронизираната папка.",
    "An external command handles the versioning. It has to remove the file from the synced folder.": "Друга команда се занимава с версиите. Тази команда трябва да премахни файла от синхронизираната папка.",
    "Anonymous Usage Reporting": "Анонимен доклад",
    "Any devices configured on an introducer device will be added to this device as well.": "Устройства настроени да представят други устройства също ще бъдат добавени към това устройство.",
+    "Automatic upgrade now offers the choice between stable releases and release candidates.": "Автоматичното обновяване вече предлага избор между стабилни версии и кандидат версии.",
    "Automatic upgrades": "Автоматично обновяване",
    "Be careful!": "Внимание!",
    "Bugs": "Бъгове",
    "CPU Utilization": "Използван процесор",
    "Changelog": "Списък с промени",
    "Clean out after": "Изчисти след",
+    "Click to see discovery failures": "Натиснете, за да видите грешки при откриването",
    "Close": "Затвори",
    "Command": "Команда",
    "Comment, when used at the start of a line": "Коментар, използван в началото на реда",
@@ -37,8 +43,11 @@
    "Copied from elsewhere": "Копиране от някъде другаде",
    "Copied from original": "Копиран от оригинала",
    "Copyright © 2014-2016 the following Contributors:": "Всички правата запазени © 2014-2016 Сътрудници:",
+    "Copyright © 2014-2017 the following Contributors:": "Всички правата запазени © 2014-2017. Сътрудници:",
+    "Creating ignore patterns, overwriting an existing file at {%path%}.": "Създаване на шаблони за игнориране, презаписване на съществуващ файл в {{path}}.",
    "Danger!": "Опасност!",
    "Deleted": "Изтрито",
+    "Device": "Устройство",
    "Device \"{%name%}\" ({%device%} at {%address%}) wants to connect. Add new device?": "Устройство \"{{name}}\" ({{device}}) на {{address}} желае да се свърже. Добави ново устройство?",
    "Device ID": "Идентификатор на устройство",
    "Device Identification": "Идентификатор на устройство",
@@ -47,6 +56,7 @@
    "Disconnected": "Не е свързано",
    "Discovered": "Открит",
    "Discovery": "Откриване",
+    "Discovery Failures": "Грешка в откриването",
    "Documentation": "Документация",
    "Download Rate": "Скорост на сваляне",
    "Downloaded": "Изтеглен",
@@ -55,17 +65,23 @@
    "Edit Device": "Промяна на устройството",
    "Edit Folder": "Промяна на папката",
    "Editing": "Променяне",
+    "Editing {%path%}.": "Промяна на  {{path}}.",
    "Enable NAT traversal": "Разреши NAT traversal",
    "Enable Relaying": "Разреши препращане",
+    "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Въведете не отрицателно число (пр. \"2.35\") и изберете единица.\nПроцентите са като част от размера на цялото дисково пространство.",
+    "Enter a non-privileged port number (1024 - 65535).": "Въведете непривилегирован номер на порт (1024-65535).",
    "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Въведете адреси разделени със запетая (\"tcp://ip:port\", \"tcp://host:port\") или \"dynamic\", за да автоматично откриване на наличните адреси.",
    "Enter ignore patterns, one per line.": "Добави шаблони за игнориране, по един на ред.",
    "Error": "Грешка",
    "External File Versioning": "Външно управление на версиите",
    "Failed Items": "Неуспешни",
+    "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "Неуспешна връзка към IPv6 сървъри може да се очаква ако няма IPv6 свързаност.",
    "File Pull Order": "Ред на сваляне",
    "File Versioning": "Версии на файловете",
    "File permission bits are ignored when looking for changes. Use on FAT file systems.": "Битовете за права за достъп ще бъдат игнорирани, когато се проверява за промени. Ползвайте за файлови системи тип FAT.",
+    "Files are moved to .stversions directory when replaced or deleted by Syncthing.": "Файловете биват преместени в .stversions папка, когато са заменен или изтрити от Syncthing.",
    "Files are moved to .stversions folder when replaced or deleted by Syncthing.": "Файловете биват преместени в .stversions папка, когато са заменен или изтрити от Syncthing.",
+    "Files are moved to date stamped versions in a .stversions directory when replaced or deleted by Syncthing.": "Когато syncthing замени или изтрие файл той се премества в  .stversions и преименува с набавени дата и час.",
    "Files are moved to date stamped versions in a .stversions folder when replaced or deleted by Syncthing.": "Когато syncthing замени или изтрие файл той се премества в  .stversions и преименува с набавени дата и час.",
    "Files are protected from changes made on other devices, but changes made on this device will be sent to the rest of the cluster.": "Защитава файловете от промени направени на други устройства, но промените направени на това устройство ще бъдат синхронизирани с останалите устройства.",
    "Folder": "Папка",
@@ -77,8 +93,11 @@
    "GUI": "Потребителски интерфейс",
    "GUI Authentication Password": "Парола за интерфейса",
    "GUI Authentication User": "Потребителско име за интерфейса",
+    "GUI Listen Address": "Адрес на слушане на GUI-то",
    "GUI Listen Addresses": "Адрес за свързване с потребителския интерфейс",
+    "GUI Theme": "Тема за потребителския интефейс",
    "Generate": "Генерирай",
+    "Global Changes": "Глобални промени",
    "Global Discovery": "Глобално откриване",
    "Global Discovery Servers": "Сървъри за глобално откриване",
    "Global State": "Глобално състояние",
@@ -89,6 +108,7 @@
    "Ignore Permissions": "Игнорирай правата за достъп",
    "Incoming Rate Limit (KiB/s)": "Лимит на скоростта за сваляне (KiB/s)",
    "Incorrect configuration may damage your folder contents and render Syncthing inoperable.": "Неправилни настройки могат да повредят файловете и да попречат на синхронизирането.",
+    "Introduced By": "Предложен от",
    "Introducer": "Може да предлага други устройства",
    "Inversion of the given condition (i.e. do not exclude)": "Обратното на даденото условие (пр. не изключвай)",
    "Keep Versions": "Пази версии",
@@ -98,6 +118,7 @@
    "Last seen": "Последно видяно",
    "Later": "По-късно",
    "Latest Change": "Последна промяна",
+    "Learn more": "Научете повече",
    "Listeners": "Синхронизиращи устройства",
    "Local Discovery": "Локално откриване",
    "Local State": "Локално състояние",
@@ -115,6 +136,7 @@
    "Newest First": "Първо най-новите",
    "No": "Не",
    "No File Versioning": "Без версии",
+    "No upgrades": "Няма обновления",
    "Normal": "Нормален",
    "Notice": "Известие",
    "OK": "ОК",
@@ -126,13 +148,18 @@
    "Out of Sync Items": "Несинхронизирани елементи",
    "Outgoing Rate Limit (KiB/s)": "Лимит на скорост за качване (KiB/s)",
    "Override Changes": "Наложи локалните промени",
+    "Path": "Път",
    "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Път до папката на това устройство. Ако не съществува ще бъде създадена. Символът тилда (~) може да бъде използван като заместител на",
+    "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).": "Пътят, където версиите да бъдат складирани(оставете празно за папката .stversions).",
    "Path where versions should be stored (leave empty for the default .stversions folder in the folder).": "Пътят, където версиите да бъдат складирани(остави празно за папката .stversions).",
    "Pause": "Пауза",
+    "Pause All": "Пауза на висчко",
    "Paused": "На пауза",
    "Please consult the release notes before performing a major upgrade.": "Моля прочети бележките по обновяването преди да започнеш.",
    "Please set a GUI Authentication User and Password in the Settings dialog.": "Моля задайте потребителско име и парола за потребителския интерфейс в секцията Настройки.",
    "Please wait": "Моля изчакай",
+    "Prefix indicating that the file can be deleted if preventing directory removal": "Представка, която индикира, че файлът може да бъде изтрит ако пречи на премахването на папка",
+    "Prefix indicating that the pattern should be matched without case sensitivity": "Представка, която индикира, че зададения шаблон трябва да бъде проверен без значение за главни/малки букви",
    "Preview": "Преглед",
    "Preview Usage Report": "Разгледай доклада за използване",
    "Quick guide to supported patterns": "Бърз наръчник към поддържаните шаблони",
@@ -140,6 +167,7 @@
    "Random": "Произволен",
    "Reduced by ignore patterns": "Намалено посредством шаблон за игнориране",
    "Release Notes": "Бележки по обновяването",
+    "Release candidates contain the latest features and fixes. They are similar to the traditional bi-weekly Syncthing releases.": "Кандидат версиите съдържат най-новата функционалност и поправки. Те са близки до традиционните дву-седмични Synchthing обновления.",
    "Remote Devices": "Чужди устройства",
    "Remove": "Премахни",
    "Required identifier for the folder. Must be the same on all cluster devices.": "Задължителен идентификатор за тази папка. Трябва да бъде един и същ на всички устройства.",
@@ -150,6 +178,7 @@
    "Restart Needed": "Изисква се рестартиране",
    "Restarting": "Рестартиране",
    "Resume": "Пусни",
+    "Resume All": "Пускане на всичко",
    "Reused": "Повторно използван",
    "Save": "Запази",
    "Scan Time Remaining": "Оставащо време за сканиране",
@@ -175,6 +204,9 @@
    "Single level wildcard (matches within a directory only)": "Маска на едно ниво (покрива само в папка)",
    "Smallest First": "Първо най-малките",
    "Source Code": "Сорс код",
+    "Stable releases and release candidates": "Стабилни версии и кандидати за стабилни версии",
+    "Stable releases are delayed by about two weeks. During this time they go through testing as release candidates.": "Стабилните версии са забавени с две седмици. През това време те преминават през тестване като бъдат кандидат версии.",
+    "Stable releases only": "Само стабилни версии",
    "Staggered File Versioning": "Наслагващи се версии",
    "Start Browser": "Стартирай браузъра",
    "Statistics": "Статистика",
@@ -215,7 +247,10 @@
    "This Device": "Вашето устройство",
    "This can easily give hackers access to read and change any files on your computer.": "Това дава лесен достъп на хакери да разглеждат и променят всякакви файлове на компютъра Ви.",
    "This is a major version upgrade.": "Това е нова основна версия.",
+    "This setting controls the free space required on the home (i.e., index database) disk.": "Тази настройка контролира нужното свободното място на основния (пр. този с базата данни) диск.",
+    "Time": "Време",
    "Trash Can File Versioning": "Само на файловете в кошчето",
+    "Type": "Тип",
    "Unknown": "Неясно",
    "Unshared": "Несподелена",
    "Unused": "Неизползван",
@@ -226,14 +261,21 @@
    "Upgrading": "Обновяване",
    "Upload Rate": "Скорост на качване",
    "Uptime": "Работи от",
+    "Usage reporting is always enabled for candidate releases.": "Докладът за ползването е винаги включен за кандидат нови версии.",
    "Use HTTPS for GUI": "Използвай HTTPS за потребителския интерфейс",
    "Version": "Версия",
    "Versions Path": "Път до версиите",
    "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "Версиите биват изтривани автоматично, когато са по-стари от максималната възраст или надминават броя файлове разрешени в даден интервал.",
+    "Warning, this path is a parent directory of an existing folder \"{%otherFolder%}\".": "Предупреждение, този път е по-горна директория на съществуващата папка \"{{otherFolder}}\".",
+    "Warning, this path is a parent directory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Предупреждение, този път е по-горна директория на съществуващата папка \"{{otherFolderLabel}}\" ({{otherFolder}}).",
    "Warning, this path is a subdirectory of an existing folder \"{%otherFolder%}\".": "Внимание, това е вътрешна папка на вече съществуваща папка \"{{otherFolder}}\".",
+    "Warning, this path is a subdirectory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Предупреждение, този път е под-директория на съществуващата папка \"{{otherFolderLabel}}\" ({{otherFolder}}).",
    "When adding a new device, keep in mind that this device must be added on the other side too.": "Когато добавяш ново устройство помни, че твоето устройство също трябва да бъде добавено от другата страна.",
    "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Когато добавяш нов идентификатор на папка помни, че той се използва за свързване на папките на различни устройства. Главни/малки букви са от значение и трябва да са еднакви на всички устройства.",
    "Yes": "Да",
+    "You can also select one of these nearby devices:": "Също така може да изберете едно от следните устройтва намиращи се наблизо:",
+    "You can change your choice at any time in the Settings dialog.": "Може да промените решението си по всяко време в прозореца Настройки.",
+    "You can read more about the two release channels at the link below.": "Може да научите допълнително за двата канала на версии, следвайки връзката по-долу.",
    "You must keep at least one version.": "Трябва да пазиш поне една версия.",
    "days": "дни",
    "directories": "директории",
--- a/gui/default/assets/lang/lang-ca.json
+++ b/gui/default/assets/lang/lang-ca.json
@@ -1,245 +0,0 @@
-{
-    "A device with that ID is already added.": "Ja s'ha afegit un dispositiu amb aquesta ID.",
-    "A negative number of days doesn't make sense.": "Un nombre negatiu de dies no té sentit.",
-    "A new major version may not be compatible with previous versions.": "Una nova versió major pot ser incompatible amb versions anteriors.",
-    "API Key": "Clau API",
-    "About": "Sobre",
-    "Actions": "Accions",
-    "Add": "Afegir",
-    "Add Device": "Afegir dispositiu",
-    "Add Folder": "Afegir carpeta",
-    "Add Remote Device": "Add Remote Device",
-    "Add new folder?": "Afegir nova carpeta?",
-    "Address": "Adreça",
-    "Addresses": "Adreces",
-    "Advanced": "Avançat",
-    "Advanced Configuration": "Configuració Avançada",
-    "Advanced settings": "Advanced settings",
-    "All Data": "Totes les dades",
-    "Allow Anonymous Usage Reporting?": "Permetre l'enviament anònim d'informes d'ús?",
-    "Alphabetic": "Alfabètic",
-    "An external command handles the versioning. It has to remove the file from the synced folder.": "Un comando extern s'encarrega del control de versions. Ha d'eliminar l'arxiu de la carpeta sincronitzada.",
-    "Anonymous Usage Reporting": "Informe anònim d'ús",
-    "Any devices configured on an introducer device will be added to this device as well.": "Qualsevol dispositiu configurat en un dispositiu introductor també s'afegirà a aquest dispositiu.",
-    "Automatic upgrades": "Actualitzacions automàtiques",
-    "Be careful!": "Ves amb compte!",
-    "Bugs": "Bugs",
-    "CPU Utilization": "Utilització del CPU",
-    "Changelog": "Historial de canvis",
-    "Clean out after": "Netejar després",
-    "Close": "Tancar",
-    "Command": "Comando",
-    "Comment, when used at the start of a line": "Comentari quan és usat al principi d'una línia",
-    "Compression": "Compressió",
-    "Configured": "Configured",
-    "Connection Error": "Error de connexió",
-    "Connection Type": "Connection Type",
-    "Copied from elsewhere": "Copiat d'un altre lloc",
-    "Copied from original": "Copiat de l'original",
-    "Copyright © 2014-2016 the following Contributors:": "Copyright © 2014-2016 the following Contributors:",
-    "Danger!": "Perill!",
-    "Deleted": "Esborrat",
-    "Device \"{%name%}\" ({%device%} at {%address%}) wants to connect. Add new device?": "Device \"{{name}}\" ({{device}} at {{address}}) wants to connect. Add new device?",
-    "Device ID": "ID del dispositiu",
-    "Device Identification": "Identificació del dispositiu",
-    "Device Name": "Nom del dispositiu",
-    "Devices": "Dispositius",
-    "Disconnected": "Desconnectat",
-    "Discovered": "Discovered",
-    "Discovery": "Descobriment",
-    "Documentation": "Documentació",
-    "Download Rate": "Tasca de descarrega",
-    "Downloaded": "Descarregat",
-    "Downloading": "Descarregant",
-    "Edit": "Editar",
-    "Edit Device": "Edit Device",
-    "Edit Folder": "Edit Folder",
-    "Editing": "Modificant",
-    "Enable NAT traversal": "Enable NAT traversal",
-    "Enable Relaying": "Enable Relaying",
-    "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Introdueix adreces separades per comes (\"tcp://ip:port\", \"tcp://host:port\") o \"dinàmic\" per realitzar descobriments automàtics de l'adreça.",
-    "Enter ignore patterns, one per line.": "Introduex patrons a ignorar, un per línia.",
-    "Error": "Error",
-    "External File Versioning": "Versionat de fitxers extern",
-    "Failed Items": "Elements fallats",
-    "File Pull Order": "Ordre d'agafar fitxers",
-    "File Versioning": "Versionat de Fitxers",
-    "File permission bits are ignored when looking for changes. Use on FAT file systems.": "Els bits de permisos dels fitxers son ignorats quan es cerquen canvis. Utilitzar en sistemes de fitxers FAT.",
-    "Files are moved to .stversions folder when replaced or deleted by Syncthing.": "Els fitxers són moguts a la carpeta .stversions quan són reemplaçats o esborrats per Syncthing.",
-    "Files are moved to date stamped versions in a .stversions folder when replaced or deleted by Syncthing.": "Els fitxers es mouen amb l'estampat de la data a la carpeta .stversions quan son substituïts o esborrats per syncthing.",
-    "Files are protected from changes made on other devices, but changes made on this device will be sent to the rest of the cluster.": "Els fitxers estan protegits de canvis fets per altres dispositius, però els canvis fets en aquest dispositiu seran enviats a la resta del cluster.",
-    "Folder": "Carpeta",
-    "Folder ID": "ID de carpeta",
-    "Folder Label": "Folder Label",
-    "Folder Path": "Camí de carpeta",
-    "Folder Type": "Folder Type",
-    "Folders": "Carpetes",
-    "GUI": "GUI",
-    "GUI Authentication Password": "Contrasenya d'autenticació GUI",
-    "GUI Authentication User": "Usuari d'autenticació GUI",
-    "GUI Listen Addresses": "Adreça d'escolta del GUI",
-    "Generate": "Generar",
-    "Global Discovery": "Descobriment Global",
-    "Global Discovery Servers": "Global Discovery Servers",
-    "Global State": "Estat global",
-    "Help": "Ajuda",
-    "Home page": "Pàgina d'inici",
-    "Ignore": "Ignorar",
-    "Ignore Patterns": "Patrons d'ignoració",
-    "Ignore Permissions": "Ignora Permisos",
-    "Incoming Rate Limit (KiB/s)": "Límit de velocitat d'entrada (KiB/s)",
-    "Incorrect configuration may damage your folder contents and render Syncthing inoperable.": "Una configuració incorrecta pot malmetre els continguts de la teva carpeta i que Syncthing esdevingui inoperatiu.",
-    "Introducer": "Introductor",
-    "Inversion of the given condition (i.e. do not exclude)": "Inversió del patrò introduït",
-    "Keep Versions": "Mantenir Versions",
-    "Largest First": "Més gran primer",
-    "Last File Received": "Últim fitxer rebut",
-    "Last Scan": "Last Scan",
-    "Last seen": "Vist per última vegada",
-    "Later": "Després",
-    "Latest Change": "Latest Change",
-    "Listeners": "Listeners",
-    "Local Discovery": "Descobriment Local",
-    "Local State": "Estat local",
-    "Local State (Total)": "Estat local (Total)",
-    "Major Upgrade": "Actualització major",
-    "Master": "Master",
-    "Maximum Age": "Antiguitat Màxima",
-    "Metadata Only": "Només metadades",
-    "Minimum Free Disk Space": "Espai de disc lliure mínim",
-    "Move to top of queue": "Moure al primer de la cua",
-    "Multi level wildcard (matches multiple directory levels)": "Caràcter comodí de nivell múltiple (aparella en carpetes de nivells múltiples)",
-    "Never": "Mai",
-    "New Device": "Nou dispositiu",
-    "New Folder": "Nova carpeta",
-    "Newest First": "Més nou primer",
-    "No": "No",
-    "No File Versioning": "Sense Versionat de Fitxer",
-    "Normal": "Normal",
-    "Notice": "Avís",
-    "OK": "OK",
-    "Off": "Desactivar",
-    "Oldest First": "Més antic primer",
-    "Optional descriptive label for the folder. Can be different on each device.": "Optional descriptive label for the folder. Can be different on each device.",
-    "Options": "Opcions",
-    "Out of Sync": "Fora de sincronia",
-    "Out of Sync Items": "Arxius encara no sincronitzats",
-    "Outgoing Rate Limit (KiB/s)": "Límit de velocitat de sortida (KiB/s)",
-    "Override Changes": "Sobreescriure Canvis",
-    "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Ruta de la carpeta a l'equip local. Si no existeix serà creada. El caràcter (~) es pot fer servir com a drecera de",
-    "Path where versions should be stored (leave empty for the default .stversions folder in the folder).": "Ruta on les versions s'haurien de guardar (deixa-ho buit per fer servir el directori .stversions per defecte a la carpeta)",
-    "Pause": "Pausa",
-    "Paused": "Pausat",
-    "Please consult the release notes before performing a major upgrade.": "Si us plau consulta les notes de llançament abans de realitzar una actualització major.",
-    "Please set a GUI Authentication User and Password in the Settings dialog.": "Si us plau, estableix un usuari i contrasenya al GUI a través del quadre de diàleg de configuració.",
-    "Please wait": "Si-us-plau espera",
-    "Preview": "Vista prèvia",
-    "Preview Usage Report": "Vista Prèvia de l'Informe d'Ús",
-    "Quick guide to supported patterns": "Guia ràpida per als possibles patrons",
-    "RAM Utilization": "Utilització de la RAM",
-    "Random": "Aleatori",
-    "Reduced by ignore patterns": "Reduced by ignore patterns",
-    "Release Notes": "Notes de llançament",
-    "Remote Devices": "Remote Devices",
-    "Remove": "Esborrar",
-    "Required identifier for the folder. Must be the same on all cluster devices.": "Required identifier for the folder. Must be the same on all cluster devices.",
-    "Rescan": "Re-escanejar",
-    "Rescan All": "Re-escanejar tot",
-    "Rescan Interval": "Interval de re-escaneig",
-    "Restart": "Reiniciar",
-    "Restart Needed": "És Necessari Reiniciar",
-    "Restarting": "Reiniciant",
-    "Resume": "Reprendre",
-    "Reused": "Reutilitzat",
-    "Save": "Guardar",
-    "Scan Time Remaining": "Temps d'escanejat restant",
-    "Scanning": "Escanejant",
-    "Select the devices to share this folder with.": "Selecciona els dispositius en els quals compartir aquesta carpeta.",
-    "Select the folders to share with this device.": "Selecciona la carpeta per a compartir en aquest dispositiu.",
-    "Send & Receive": "Send & Receive",
-    "Send Only": "Send Only",
-    "Settings": "Preferències",
-    "Share": "Compartir",
-    "Share Folder": "Compartir carpeta",
-    "Share Folders With Device": "Compartir carpetes en dispositiu",
-    "Share With Devices": "Compartir en dispositius",
-    "Share this folder?": "Compartir aquesta carpeta?",
-    "Shared With": "Compartir Amb",
-    "Show ID": "Mostrar ID",
-    "Show QR": "Show QR",
-    "Shown instead of Device ID in the cluster status. Will be advertised to other devices as an optional default name.": "Mostrat en comptes del ID del Node en l'estat del cluster. Serà advertit als altres dispositius com un nom opcional per defecte.",
-    "Shown instead of Device ID in the cluster status. Will be updated to the name the device advertises if left empty.": "Mostrat en comptes del ID del Node en l'estat del cluster. S'actualitzarà al nom del dispositiu si es deixa buit.",
-    "Shutdown": "Apagar",
-    "Shutdown Complete": "Apagat complet",
-    "Simple File Versioning": "Versionat de Fitxers Senzill",
-    "Single level wildcard (matches within a directory only)": "Caràcter comodí de nivell singular (aparella sóls en una carpeta)",
-    "Smallest First": "Més petit primer",
-    "Source Code": "Codi Font",
-    "Staggered File Versioning": "Versionat de Fitxers Esglaonat",
-    "Start Browser": "Arrancar Navegador",
-    "Statistics": "Estadístiques",
-    "Stopped": "Aturat",
-    "Support": "Suport",
-    "Sync Protocol Listen Addresses": "Adreça d'escolta del Protocol Sync",
-    "Syncing": "Synthing",
-    "Syncthing has been shut down.": "S'ha aturat el synthing.",
-    "Syncthing includes the following software or portions thereof:": "Syncthing inclou el següent programari o parts dels mateixos:",
-    "Syncthing is restarting.": "Reiniciant syncthing.",
-    "Syncthing is upgrading.": "Actualitzant syncthing.",
-    "Syncthing seems to be down, or there is a problem with your Internet connection. Retrying…": "Synthing sembla parat, o hi ha algun problema amb la connexió a Internet. Reintentant...",
-    "Syncthing seems to be experiencing a problem processing your request. Please refresh the page or restart Syncthing if the problem persists.": "Sembla ser que Syncthing està tinguent problemes per processar la teva petició. Si us plau, refresca la pàgina o reinicia Syncthing si el problema persisteix.",
-    "The Syncthing admin interface is configured to allow remote access without a password.": "La interfície d'administració de Syncthing està configurada per permetre l'accés remot sense contrasenya.",
-    "The aggregated statistics are publicly available at the URL below.": "The aggregated statistics are publicly available at the URL below.",
-    "The configuration has been saved but not activated. Syncthing must restart to activate the new configuration.": "La configuració s'ha guardar però no s'ha activat. S'ha de reiniciar el synthing per activar la nova configuració.",
-    "The device ID cannot be blank.": "El ID del dispositiu no pot estar en blanc.",
-    "The device ID to enter here can be found in the \"Actions > Show ID\" dialog on the other device. Spaces and dashes are optional (ignored).": "The device ID to enter here can be found in the \"Actions > Show ID\" dialog on the other device. Spaces and dashes are optional (ignored).",
-    "The encrypted usage report is sent daily. It is used to track common platforms, folder sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.": "L'informe d'ús encriptat s'envia diàriament. Es fa servir per rastrejar plataformes habituals, mides de carpetes i versions de l'aplicació. Si es canvia el conjunt de dades reportades es demanarà amb aquest diàleg de nou.",
-    "The entered device ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.": "El ID del dispositiu introduït no sembla vàlid. Hauria de tenir 52 o 56 caràcters amb lletres i números, els espais i les barres son opcionals.",
-    "The first command line parameter is the folder path and the second parameter is the relative path in the folder.": "El primer paràmetre de la línia de comandes és el camí a la carpeta i el segon paràmetre és el camí relatiu a la carpeta.",
-    "The folder ID cannot be blank.": "El ID del dispositiu no pot estar en blanc.",
-    "The folder ID must be unique.": "El ID de la carpeta ha de ser únic.",
-    "The folder path cannot be blank.": "El camí a la carpeta no pot estar en blanc.",
-    "The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.": "Es fan servir els següents intervals: per la primera hora es manté una versió cada 30 segons, pel primer dia es manté una versió cada hora, pel primer cada 30 dies es manté una versió cada dia, fins el màxim d'antiguitat es manté una versió cada setmana.",
-    "The following items could not be synchronized.": "Els següents elements no es poden sincronitzar.",
-    "The maximum age must be a number and cannot be blank.": "La màxima antiguitat ha de ser un número i no pot estar en blanc.",
-    "The maximum time to keep a version (in days, set to 0 to keep versions forever).": "Temps màxim en mantenir una versió (en dies, si es deixa en 0 es mantenen les versions per sempre).",
-    "The minimum free disk space percentage must be a non-negative number between 0 and 100 (inclusive).": "El percentatge d'espai de disc lliure mínim ha de ser un nombre positiu entre 0 i 100 (inclosos).",
-    "The number of days must be a number and cannot be blank.": "El nombre de dies ha de ser un número i no pot estar en blanc.",
-    "The number of days to keep files in the trash can. Zero means forever.": "El nombre de dies per guardar els fitxers a la paperera. Zero significa per sempre.",
-    "The number of old versions to keep, per file.": "El nombre de versions antigues que es mantenen per fitxer.",
-    "The number of versions must be a number and cannot be blank.": "El nombre de versions ha de ser un número i no es pot deixar en blanc.",
-    "The path cannot be blank.": "El camí no pot estar en blanc.",
-    "The rate limit must be a non-negative number (0: no limit)": "El límit de velocitat ha de ser un nombre positiu (0: sense límit)",
-    "The rescan interval must be a non-negative number of seconds.": "El interval de re-escaneig ha der ser un nombre positiu de segons.",
-    "They are retried automatically and will be synced when the error is resolved.": "Són reintentats automàticament i seran sincronitzats quan l'error estigui resolt.",
-    "This Device": "This Device",
-    "This can easily give hackers access to read and change any files on your computer.": "Això pot donar facilment accés a hackers per llegir i canviar qualsevol fitxer del teu ordinador.",
-    "This is a major version upgrade.": "Aquesta és una actualització de versió major.",
-    "Trash Can File Versioning": "Paperera de versionat de fitxers",
-    "Unknown": "Desconegut",
-    "Unshared": "No compartit",
-    "Unused": "No usat",
-    "Up to Date": "Actualitzat",
-    "Updated": "Actualitzat",
-    "Upgrade": "Actualització",
-    "Upgrade To {%version%}": "Actualitzar a {{version}}",
-    "Upgrading": "Actualitzant",
-    "Upload Rate": "Tasca de Pujada",
-    "Uptime": "Temps funcionant",
-    "Use HTTPS for GUI": "Utilitzar HTTPS pel GUI",
-    "Version": "Versió",
-    "Versions Path": "Carpeta de les Versions",
-    "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "Les versions son automàticament eliminades si son més antigues que el màxim d'antiguitat o si excedeixen del nombre de fitxers permesos en un interval.",
-    "Warning, this path is a subdirectory of an existing folder \"{%otherFolder%}\".": "Warning, this path is a subdirectory of an existing folder \"{{otherFolder}}\".",
-    "When adding a new device, keep in mind that this device must be added on the other side too.": "Quan s'afegeix un nou dispositiu, recorda que aquest dispositiu tambè s'ha d'afegir a l'altre banda.",
-    "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Quan s'afegeix una nova carpeta recorda que el ID d'aquesta s'utilitza per lligar repositoris entre els dispositius. Es distingeix entre majúscules i minúscules i ha de ser exactament iguals entre tots els dispositius.",
-    "Yes": "Si",
-    "You must keep at least one version.": "Has de mantenir com a mínim una versió.",
-    "days": "dies",
-    "directories": "directories",
-    "files": "files",
-    "full documentation": "documentació sencera",
-    "items": "Elements",
-    "{%device%} wants to share folder \"{%folder%}\".": "{{device}} vol compartir la carpeta \"{{folder}}\".",
-    "{%device%} wants to share folder \"{%folderlabel%}\" ({%folder%}).": "{{device}} wants to share folder \"{{folderlabel}}\" ({{folder}})."
-}
--- a/gui/default/assets/lang/lang-ca@valencia.json
+++ b/gui/default/assets/lang/lang-ca@valencia.json
@@ -4,11 +4,13 @@
    "A new major version may not be compatible with previous versions.": "Una nova versión amb canvis importants pot no ser compatible amb versions prèvies.",
    "API Key": "Clau API",
    "About": "Sobre",
+    "Action": "Acció",
    "Actions": "Accions",
    "Add": "Afegir",
    "Add Device": "Afegir dispositiu",
    "Add Folder": "Afegir carpeta",
    "Add Remote Device": "Afegir Dispositiu Remot.",
+    "Add devices from the introducer to our device list, for mutually shared folders.": "Afegir dispositius des-de l'introductor a la nostra llista de dispositius, per a tindre carpetes compartides mútuament",
    "Add new folder?": "Afegir nova carpeta?",
    "Address": "Direcció",
    "Addresses": "Direccions",
@@ -17,55 +19,69 @@
    "Advanced settings": "Ajustos avançats.",
    "All Data": "Totes les dades",
    "Allow Anonymous Usage Reporting?": "Permetre informes d'ús anònim?",
+    "Allowed Networks": "Xarxes permeses",
    "Alphabetic": "Alfabètic",
+    "An external command handles the versioning. It has to remove the file from the shared folder.": "Un command extern maneja les versions. Té que eliminar el fitxer de la carpeta compartida.",
    "An external command handles the versioning. It has to remove the file from the synced folder.": "Un comando extern controla el versionat. És necessari eliminar el fitxer de la carpeta sincronitzada.",
    "Anonymous Usage Reporting": "Informe d'ús anònim",
    "Any devices configured on an introducer device will be added to this device as well.": "Tots els dispositius configurats en un dispositiu presentador seràn afegits també a aquest dispositiu.",
+    "Automatic upgrade now offers the choice between stable releases and release candidates.": "L'actualització automàtica ara ofereix l'elecció entre les versions estables i les versions candidates.",
    "Automatic upgrades": "Actualitzacions automàtiques",
    "Be careful!": "Tin precaució!",
    "Bugs": "Errors (Bugs)",
    "CPU Utilization": "Utilització de la CPU",
    "Changelog": "Registre de canvis",
    "Clean out after": "Netejar després de",
+    "Click to see discovery failures": "Clica per a vore els fallos en el descobriment",
    "Close": "Tancar",
    "Command": "Comando",
    "Comment, when used at the start of a line": "Comentar, quant s'utilitza al principi d'una línia",
    "Compression": "Compresió",
-    "Configured": "Configured",
+    "Configured": "Configurat",
    "Connection Error": "Error de connexió",
    "Connection Type": "Tipus de connexió",
    "Copied from elsewhere": "Copiat de qualsevol lloc",
    "Copied from original": "Copiat de l'original",
    "Copyright © 2014-2016 the following Contributors:": "Copyright © 2014-2016 els següents Col·laboradors:",
+    "Copyright © 2014-2017 the following Contributors:": "Copyright © 2014-2017 els següents Col·laboradors:",
+    "Creating ignore patterns, overwriting an existing file at {%path%}.": "Creant patrons a ignorar, sobreescriguent un fitxer que ja existeix a {{path}}.",
    "Danger!": "Perill!",
    "Deleted": "Esborrat",
+    "Device": "Dispositiu",
    "Device \"{%name%}\" ({%device%} at {%address%}) wants to connect. Add new device?": "Dispositiu \"{{name}}\" ({{device}} a l'adreça {{address}}) vol connectar. Afegir nou dispositiu?",
    "Device ID": "ID del dispositiu",
    "Device Identification": "Identificació del dispositiu",
    "Device Name": "Nom del dispositiu",
    "Devices": "Dispositius",
    "Disconnected": "Desconnectat",
-    "Discovered": "Discovered",
+    "Discovered": "Descobert",
    "Discovery": "Descobriment",
+    "Discovery Failures": "Fallades al Descobriment",
    "Documentation": "Documentació",
    "Download Rate": "Velocitat de descàrrega",
    "Downloaded": "Descarregat",
    "Downloading": "Descarregant",
    "Edit": "Editar",
-    "Edit Device": "Edit Device",
-    "Edit Folder": "Edit Folder",
+    "Edit Device": "Editar Dispositiu",
+    "Edit Folder": "Editar Carpeta",
    "Editing": "Editant",
+    "Editing {%path%}.": "Editant {{path}}.",
    "Enable NAT traversal": "Permetre NAT transversal",
    "Enable Relaying": "Permetre Transmissions",
+    "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Introdueix un nombre no negatiu (per exemple, \"2.35\") i selecciona una unitat. Els percentatges són com a part del tamany total del disc.",
+    "Enter a non-privileged port number (1024 - 65535).": "Introdueix un nombre de port sense privilegis (1024-65535).",
    "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Introdueix adreces separades per coma (\"tcp://ip:port\", \"tcp://host:port\") o \"dynamic\" per a realitzar el descobriment automàtic de l'adreça.",
    "Enter ignore patterns, one per line.": "Introduïr patrons a ignorar, un per línia.",
    "Error": "Error",
    "External File Versioning": "Versionat extern de fitxers",
    "Failed Items": "Objectes fallits",
+    "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "És possible que es produïsca una fallada al connectar als servidors IPv6 si no hi ha connectivitat IPv6.",
    "File Pull Order": "Ordre de fitxers del pull",
    "File Versioning": "Versionat de fitxer",
    "File permission bits are ignored when looking for changes. Use on FAT file systems.": "Els bits de permís del fitxer són ignorats quant es busquen els canvis. Utilitzar en sistemes de fitxers FAT.",
+    "Files are moved to .stversions directory when replaced or deleted by Syncthing.": "Els fitxers seràn moguts al directori .stversions quant siguen reemplaçats o esborrats per Syncthing.",
    "Files are moved to .stversions folder when replaced or deleted by Syncthing.": "Els arxius es menejen a la carpeta .stversions quant són substituïts o esborrats per Syncthing.",
+    "Files are moved to date stamped versions in a .stversions directory when replaced or deleted by Syncthing.": "Els arxius seran moguts a un directori .stversions a versions amb control de la data quan siguen reemplaçats o esborrats per Syncthing.",
    "Files are moved to date stamped versions in a .stversions folder when replaced or deleted by Syncthing.": "Els fitxers són canviats a versions amb indicació de data en una carpeta \".stversions\" quant són reemplaçats o esborrats per Syncthing.",
    "Files are protected from changes made on other devices, but changes made on this device will be sent to the rest of the cluster.": "Els fitxers són protegits dels canvis fets en altres dispositius, però els canvis fets en aquest dispositiu seràn enviats a la resta del grup (cluster).",
    "Folder": "Carpeta",
@@ -77,8 +93,11 @@
    "GUI": "IGU (Interfície Gràfica d'Usuari)",
    "GUI Authentication Password": "Password d'autenticació de l'Interfície Gràfica d'Usuari (GUI)",
    "GUI Authentication User": "Autenticació de l'usuari de l'Interfície Gràfica d'Usuari (GUI)",
+    "GUI Listen Address": "Adreça d'Escolta de l'Interfície Gràfica d'Usuari (GUI).",
    "GUI Listen Addresses": "Direcció d'escolta de l'Interfície Gràfica d'Usuari (GUI)",
+    "GUI Theme": "Tema de l'Interfície Gràfica d'Usuari (GUI)",
    "Generate": "Generar",
+    "Global Changes": "Canvis Globals",
    "Global Discovery": "Descobriment global",
    "Global Discovery Servers": "Servidors de Descobriment Global",
    "Global State": "Estat global",
@@ -89,6 +108,7 @@
    "Ignore Permissions": "Permisos a ignorar",
    "Incoming Rate Limit (KiB/s)": "Límit de descàrrega (KiB/s)",
    "Incorrect configuration may damage your folder contents and render Syncthing inoperable.": "La configuración incorrecta pot danyar el contingut de la teua carpeta i deixar Syncthing inoperatiu.",
+    "Introduced By": "Introduït Per",
    "Introducer": "Presentador",
    "Inversion of the given condition (i.e. do not exclude)": "Inversió de la condició donada (per exemple no excloure)",
    "Keep Versions": "Mantindre versions",
@@ -97,7 +117,8 @@
    "Last Scan": "Últim escaneig",
    "Last seen": "Vist per última vegada",
    "Later": "Més tard",
-    "Latest Change": "Latest Change",
+    "Latest Change": "Últim Canvi",
+    "Learn more": "Saber més",
    "Listeners": "Escoltants",
    "Local Discovery": "Descobriment local",
    "Local State": "Estat local",
@@ -115,6 +136,7 @@
    "Newest First": "El més nou primer",
    "No": "No",
    "No File Versioning": "Sense versionat de fitxer",
+    "No upgrades": "Sense actualitzacions",
    "Normal": "Normal",
    "Notice": "Avís",
    "OK": "OK",
@@ -126,20 +148,26 @@
    "Out of Sync Items": "Dispositius sense sincronitzar",
    "Outgoing Rate Limit (KiB/s)": "Límit de pujada (KiB/s)",
    "Override Changes": "Sobreescriure els canvis",
+    "Path": "Ruta",
    "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Ruta a la carpeta local en l'ordinador. Es crearà si no existeix. El caràcter tilde (~) es pot utilitzar com a drecera",
+    "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).": "La ruta on deuen guardar-se les versions (deixar buit per al directori per defecte .stversions en la carpeta compartida).",
    "Path where versions should be stored (leave empty for the default .stversions folder in the folder).": "Ruta on les versions deurien estar emmagatzemades (deixar buit per a la carpeta .stversions en la carpeta).",
    "Pause": "Pausa",
+    "Pause All": "Pausa Tot",
    "Paused": "Pausat",
    "Please consult the release notes before performing a major upgrade.": "Per favor, consultar les notes de la versió abans de fer una actualització important.",
    "Please set a GUI Authentication User and Password in the Settings dialog.": "Per favor, estableix un usuari i password per a l'Interfície Gràfica d'Usuari en el menú d'Adjustos.",
    "Please wait": "Per favor, espere",
+    "Prefix indicating that the file can be deleted if preventing directory removal": "Prefix indicating that the file can be deleted if preventing directory removal",
+    "Prefix indicating that the pattern should be matched without case sensitivity": "Prefix indicating that the pattern should be matched without case sensitivity",
    "Preview": "Vista prèvia",
    "Preview Usage Report": "Informe d'ús de vista prèvia",
    "Quick guide to supported patterns": "Guía ràpida de patrons suportats",
    "RAM Utilization": "Utilització de la RAM",
    "Random": "Aleatori",
-    "Reduced by ignore patterns": "Reduced by ignore patterns",
+    "Reduced by ignore patterns": "Reduït ignorant patrons",
    "Release Notes": "Notes de la versió",
+    "Release candidates contain the latest features and fixes. They are similar to the traditional bi-weekly Syncthing releases.": "Les versions candidates (Release Candidates) contenen les darreres característiques i arreglos. Són paregudes a les versions tradicionals bi-semanals de Syncthing. ",
    "Remote Devices": "Dispositius Remots",
    "Remove": "Eliminar",
    "Required identifier for the folder. Must be the same on all cluster devices.": "Identificador necessari per la carpeta. Deu ser el mateix en tots els dispositius del cluster.",
@@ -150,14 +178,15 @@
    "Restart Needed": "Reinici necesari",
    "Restarting": "Reiniciant",
    "Resume": "Continuar",
+    "Resume All": "Continuar Tot",
    "Reused": "Reutilitzat",
    "Save": "Gravar",
    "Scan Time Remaining": "Temps d'escaneig restant",
    "Scanning": "Rastrejant",
    "Select the devices to share this folder with.": "Selecciona els dispositius amb els que compartir aquesta carpeta.",
    "Select the folders to share with this device.": "Selecciona les carpetes per a compartir amb aquest dispositiu.",
-    "Send & Receive": "Send & Receive",
-    "Send Only": "Send Only",
+    "Send & Receive": "Enviar i Rebre",
+    "Send Only": "Enviar Solament",
    "Settings": "Ajustos",
    "Share": "Compartir",
    "Share Folder": "Compartir carpeta",
@@ -175,6 +204,9 @@
    "Single level wildcard (matches within a directory only)": "Comodí de nivell únic (coincideix sols dins d'un directori)",
    "Smallest First": "El més xicotet primer",
    "Source Code": "Codi font",
+    "Stable releases and release candidates": "Versions estables i versions candidates",
+    "Stable releases are delayed by about two weeks. During this time they go through testing as release candidates.": "Les versions estables es retrasen sobre dos setmanes. Durant aquest temps es fiquen a prova com versions candidates.",
+    "Stable releases only": "Solament versions estables",
    "Staggered File Versioning": "Versionat de fitxers escalonat",
    "Start Browser": "Iniciar navegador",
    "Statistics": "Estadístiques",
@@ -215,7 +247,10 @@
    "This Device": "Aquest Dispositiu",
    "This can easily give hackers access to read and change any files on your computer.": "Açò pot donar accés fàcilment als hackers per a llegir i canviar qualsevol fitxer al teu ordinador.",
    "This is a major version upgrade.": "Aquesta és una actualització important de la versió.",
+    "This setting controls the free space required on the home (i.e., index database) disk.": "Aquest ajust controla l'espai lliure requerit en el disc inicial (per exemple, la base de dades de l'index).",
+    "Time": "Temps",
    "Trash Can File Versioning": "Versionat d'arxius de la paperera",
+    "Type": "Tipus",
    "Unknown": "Desconegut",
    "Unshared": "No compartit",
    "Unused": "No utilitzat",
@@ -226,18 +261,25 @@
    "Upgrading": "Actualitzant",
    "Upload Rate": "Velocitat d'actualització",
    "Uptime": "Temps de funcionament",
-    "Use HTTPS for GUI": "Utilitzar HTTP per a l'Interfície Gràfica d'Usuari (GUI)",
+    "Usage reporting is always enabled for candidate releases.": "Els informes d'ús sempre estan activats per a les versions candidates.",
+    "Use HTTPS for GUI": "Utilitzar HTTPS per a l'Interfície Gràfica d'Usuari (GUI)",
    "Version": "Versió",
    "Versions Path": "Ruta de les versions",
    "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "Les versions s'esborren automàticament si són més antigues que l'edat màxima o excedixen el nombre de fitxer permesos en un interval.",
-    "Warning, this path is a subdirectory of an existing folder \"{%otherFolder%}\".": "Perill! Aquesta ruta és un subdirectori d'una carpeta que ja existeix nomenada \"{{otherFolder}}\".",
+    "Warning, this path is a parent directory of an existing folder \"{%otherFolder%}\".": "Perill! Esta ruta és un directori pare d'una carpeta ja existent \"{{otherFolder}}\".",
+    "Warning, this path is a parent directory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Perill! Esta ruta és un directori pare d'una carpeta existent \"{{otherFolderLabel}}\" ({{otherFolder}}).",
+    "Warning, this path is a subdirectory of an existing folder \"{%otherFolder%}\".": "Perill! Esta ruta és un subdirectori d'una carpeta que ja existeix nomenada \"{{otherFolder}}\".",
+    "Warning, this path is a subdirectory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Perill! Esta ruta és un subdirectori de una carpeta existent \"{{otherFolderLabel}}\" ({{otherFolder}}).",
    "When adding a new device, keep in mind that this device must be added on the other side too.": "Quant s'afig un nou dispositiu, hi ha que tindre en compte que aquest dispositiu deu ser afegit també en l'altre costat.",
    "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Quant s'afig una nova carpeta, hi ha que tindre en compte que l'ID de la carpeta s'utilitza per a juntar les carpetes entre dispositius. Són sensibles a les majúscules i deuen coincidir exactament entre tots els dispositius.",
    "Yes": "Sí",
+    "You can also select one of these nearby devices:": "You can also select one of these nearby devices:",
+    "You can change your choice at any time in the Settings dialog.": "Pots canviar la teua elecció en qualsevol moment en el dialog Ajustos",
+    "You can read more about the two release channels at the link below.": "Pots llegir més sobre els dos canals de versions en l'enllaç de baix.",
    "You must keep at least one version.": "Es deu mantindre al menys una versió.",
    "days": "dies",
-    "directories": "directories",
-    "files": "files",
+    "directories": "directoris",
+    "files": "arxius",
    "full documentation": "Documentació completa",
    "items": "Elements",
    "{%device%} wants to share folder \"{%folder%}\".": "{{device}} vol compartit la carpeta \"{{folder}}\".",
--- a/gui/default/assets/lang/lang-cs.json
+++ b/gui/default/assets/lang/lang-cs.json
@@ -1,14 +1,16 @@
 {
-    "A device with that ID is already added.": "Přístroj s tímto ID je již přídán.",
+    "A device with that ID is already added.": "Přístroj s tímto ID je již přidán.",
    "A negative number of days doesn't make sense.": "Záporný počet dní nedává smysl.",
    "A new major version may not be compatible with previous versions.": "Nová důležitá verze nemusí být kompatibilní s předchozími verzemi.",
    "API Key": "API klíč",
    "About": "O aplikaci",
+    "Action": "Akce",
    "Actions": "Akce",
    "Add": "Přidat",
    "Add Device": "Přidat přístroj",
    "Add Folder": "Přidat adresář",
    "Add Remote Device": "Přidat vzdálené zařízení",
+    "Add devices from the introducer to our device list, for mutually shared folders.": "Přidat zařízení ze zavaděče do našeho seznamu zařízení, pro vzájemně sdílené adresáře.",
    "Add new folder?": "Přidat nový adresář?",
    "Address": "Adresa",
    "Addresses": "Adresy",
@@ -17,16 +19,20 @@
    "Advanced settings": "Pokročilá nastavení",
    "All Data": "Všechna data",
    "Allow Anonymous Usage Reporting?": "Povolit anonymní hlášení o používání?",
+    "Allowed Networks": "Povolené sítě",
    "Alphabetic": "Abecedně",
+    "An external command handles the versioning. It has to remove the file from the shared folder.": "O verzování se stará externí příkaz. To on musí smazat soubor ze sdíleného adresáře.",
    "An external command handles the versioning. It has to remove the file from the synced folder.": "Verzování obstarává externí příkaz. Musí odstranit soubor ze sdíleného adresáře.",
    "Anonymous Usage Reporting": "Anonymní hlášení o používání",
    "Any devices configured on an introducer device will be added to this device as well.": "Jakékoliv přístroje nakonfigurované na zavaděči budou přidány také na tento přístroj.",
+    "Automatic upgrade now offers the choice between stable releases and release candidates.": "Automatická aktualizace nyní nabízí volbu mezi stabilními vydáními a kandidáty na vydání.",
    "Automatic upgrades": "Automatické aktualizace",
    "Be careful!": "Pozor!",
    "Bugs": "Chyby",
    "CPU Utilization": "Využití CPU",
    "Changelog": "Changelog",
    "Clean out after": "Vyčistit po",
+    "Click to see discovery failures": "Kliknutím zobrazíte selhání při oznamování",
    "Close": "Zavřít",
    "Command": "Příkaz",
    "Comment, when used at the start of a line": "Komentář, pokud použito na začátku řádku",
@@ -37,8 +43,11 @@
    "Copied from elsewhere": "Zkopírováno odjinud",
    "Copied from original": "Zkopírováno z originálu",
    "Copyright © 2014-2016 the following Contributors:": "Copyright © 2014-2016 následující přispěvatelé:",
+    "Copyright © 2014-2017 the following Contributors:": "Copyright © 2014-2017 následující přispěvatelé:",
+    "Creating ignore patterns, overwriting an existing file at {%path%}.": "Vytváření ignorovaných vzorů, přepisování existujícího souboru v {{path}}.",
    "Danger!": "Pozor!",
    "Deleted": "Smazáno",
+    "Device": "Zařízení",
    "Device \"{%name%}\" ({%device%} at {%address%}) wants to connect. Add new device?": "Zařízení \"{{name}}\" ({{device}} na {{address}}) se chce připojit. Přidat nové zařízení?",
    "Device ID": "ID přístroje",
    "Device Identification": "Identifikace přístroje",
@@ -47,6 +56,7 @@
    "Disconnected": "Odpojen",
    "Discovered": "Nalezeno",
    "Discovery": "Oznamování",
+    "Discovery Failures": "Selhání při oznamování",
    "Documentation": "Dokumentace",
    "Download Rate": "Rychlost stahování",
    "Downloaded": "Staženo",
@@ -55,18 +65,24 @@
    "Edit Device": "Upravit zařízení",
    "Edit Folder": "Upravit adresář",
    "Editing": "Upravuje se",
+    "Editing {%path%}.": "Editace {{path}}.",
    "Enable NAT traversal": "Povolit NAT přenos",
    "Enable Relaying": "Povolit přenašeče",
+    "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Zadajte kladné číslo (např. \"2.35\") a zvolte jednotku. Percenta znamenají část celkové velikosti disku.",
+    "Enter a non-privileged port number (1024 - 65535).": "Enter a non-privileged port number (1024 - 65535).",
    "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Zadejte adresy oddělené čárkou (\"tcp://ip:port\", \"tcp://host:port\") nebo \"dynamic\" pro automatické zjišťování adres.",
    "Enter ignore patterns, one per line.": "Vložit ignorované vzory, jeden na řádek.",
    "Error": "Chyba",
    "External File Versioning": "Externí verzování souborů",
    "Failed Items": "Selhalo",
+    "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "Je v pořádku, když připojení k IPv6 serverům selže, pokud není k dispozici IPv6 konektivita.",
    "File Pull Order": "Pořadí stahování souborů",
    "File Versioning": "Verzování souborů",
    "File permission bits are ignored when looking for changes. Use on FAT file systems.": "Bity označující práva souborů jsou při hledání změn ignorovány. Použít pro souborové systémy FAT.",
-    "Files are moved to .stversions folder when replaced or deleted by Syncthing.": "Po nahrazení nebo smazání aplikací Syncthing jsou soubory přesunuty do adresáře .stversions.",
-    "Files are moved to date stamped versions in a .stversions folder when replaced or deleted by Syncthing.": "Po nahrazení nebo smazání aplikací Syncthing jsou soubory přesunuty do verzí označených daty v adresáři .stversions.",
+    "Files are moved to .stversions directory when replaced or deleted by Syncthing.": "Po nahrazení nebo smazání aplikací Syncthing jsou soubory přesunuty do adresáře .stversions.",
+    "Files are moved to .stversions folder when replaced or deleted by Syncthing.": "Po nahrazení nebo smazání aplikací Syncthing jsou soubory přesunuty do složky .stversions.",
+    "Files are moved to date stamped versions in a .stversions directory when replaced or deleted by Syncthing.": "Po nahrazení nebo smazání aplikací Syncthing jsou soubory přesunuty do verzí označených daty v adresáři .stversions.",
+    "Files are moved to date stamped versions in a .stversions folder when replaced or deleted by Syncthing.": "Po nahrazení nebo smazání aplikací Syncthing jsou soubory přesunuty do verzí označených daty ve složce .stversions.",
    "Files are protected from changes made on other devices, but changes made on this device will be sent to the rest of the cluster.": "Soubory jsou chráněny před změnami na ostatních přístrojích, ale změny provedené z tohoto přístroje budou rozeslány na zbytek clusteru.",
    "Folder": "Adresář",
    "Folder ID": "ID adresáře",
@@ -77,8 +93,11 @@
    "GUI": "GUI",
    "GUI Authentication Password": "Přihlašovací heslo pro GUI",
    "GUI Authentication User": "Přihlašovací jméno pro GUI",
+    "GUI Listen Address": "Adresa naslouchání GUI",
    "GUI Listen Addresses": "Adresa naslouchání GUI",
+    "GUI Theme": "Grafické téma",
    "Generate": "Generovat",
+    "Global Changes": "Globální změny",
    "Global Discovery": "Globální oznamování",
    "Global Discovery Servers": "Servery globálního oznamování",
    "Global State": "Globální status",
@@ -89,6 +108,7 @@
    "Ignore Permissions": "Ignorovat oprávnění",
    "Incoming Rate Limit (KiB/s)": "Omezení příchozí rychlosti (KiB/s)",
    "Incorrect configuration may damage your folder contents and render Syncthing inoperable.": "Nesprávné nastavení může poškodit obsah Vašich adresářů a učinit Syncthing nefunkční.",
+    "Introduced By": "Zavedl",
    "Introducer": "Zavaděč",
    "Inversion of the given condition (i.e. do not exclude)": "Prohození zadané podmínky (např. nevynechat)",
    "Keep Versions": "Ponechat verze",
@@ -98,6 +118,7 @@
    "Last seen": "Naposledy spatřen",
    "Later": "Později",
    "Latest Change": "Poslední změna",
+    "Learn more": "Zjistěte více",
    "Listeners": "Naslouchající",
    "Local Discovery": "Místní oznamování",
    "Local State": "Místní status",
@@ -108,13 +129,14 @@
    "Metadata Only": "Pouze metadata",
    "Minimum Free Disk Space": "Minimální velikost volného místa na disku",
    "Move to top of queue": "Přesunout na začátek fronty",
-    "Multi level wildcard (matches multiple directory levels)": "Víceúrovňový zástupný znak (shoda skrz více úrovní adresářů)",
+    "Multi level wildcard (matches multiple directory levels)": "Víceúrovňový zástupný znak (shoda skrz více úrovní složek)",
    "Never": "Nikdy",
    "New Device": "Nový přístroj",
    "New Folder": "Nový adresář",
    "Newest First": "Od nejnovějšího",
    "No": "Ne",
    "No File Versioning": "Bez verzování souborů",
+    "No upgrades": "Žádné aktualizace",
    "Normal": "Normální",
    "Notice": "Oznámení",
    "OK": "OK",
@@ -126,13 +148,18 @@
    "Out of Sync Items": "Nesesynchronizované položky",
    "Outgoing Rate Limit (KiB/s)": "Omezení odchozí rychlosti (KiB/s)",
    "Override Changes": "Přepsat změny",
+    "Path": "Cesta",
    "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Cesta k adresáři na lokálním počítači. Pokud neexistuje, bude vytvořen. Znak vlnovky (~) může být použit jako zkratka pro",
-    "Path where versions should be stored (leave empty for the default .stversions folder in the folder).": "Cesta pro ukládání verzí (nechat prázdné pro výchozí podadresář .stversions v adresářích).",
+    "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).": "Cesta pro ukládání verzí (ponechte prázdné pro výchozí adresář .stversions ve sdíleném adresáři).",
+    "Path where versions should be stored (leave empty for the default .stversions folder in the folder).": "Cesta pro ukládání verzí (nechat prázdné pro výchozí složku .stversions v adresáři).",
    "Pause": "Pozastavit",
+    "Pause All": "Pozastavit vše",
    "Paused": "Pozastaveno",
    "Please consult the release notes before performing a major upgrade.": "Před spuštěním důležité aktualizace si nejdříve přečtěte poznámky k vydání nové verze.",
    "Please set a GUI Authentication User and Password in the Settings dialog.": "Zadejte prosím přihlašovací jméno a heslo pro GUI v dialogu nastavení.",
    "Please wait": "Chvíli strpení",
+    "Prefix indicating that the file can be deleted if preventing directory removal": "Prefix indicating that the file can be deleted if preventing directory removal",
+    "Prefix indicating that the pattern should be matched without case sensitivity": "Prefix indicating that the pattern should be matched without case sensitivity",
    "Preview": "Náhled",
    "Preview Usage Report": "Náhled záznamu o využítí",
    "Quick guide to supported patterns": "Rychlá nápověda k podporovaným vzorům",
@@ -140,6 +167,7 @@
    "Random": "Náhodně",
    "Reduced by ignore patterns": "Redukováno o ignorované vzory",
    "Release Notes": "Poznámky k vydání",
+    "Release candidates contain the latest features and fixes. They are similar to the traditional bi-weekly Syncthing releases.": "Kandidáti na vydání obsahují nejnovější změny a opravy. Podobají se tradičním dvoutýdenním vydáním Syncthing.",
    "Remote Devices": "Vzdálená zařízení",
    "Remove": "Odstranit",
    "Required identifier for the folder. Must be the same on all cluster devices.": "Požadovaný identifikátor adresáře. Musí být stejný na všech zařízeních.",
@@ -150,6 +178,7 @@
    "Restart Needed": "Je nutný restart",
    "Restarting": "Restartuji",
    "Resume": "Pokračovat",
+    "Resume All": "Pokračovat (vše)",
    "Reused": "Opakovaně použité",
    "Save": "Uložit",
    "Scan Time Remaining": "Zbývající čas skenování",
@@ -172,9 +201,12 @@
    "Shutdown": "Vypnout",
    "Shutdown Complete": "Vypnutí dokončeno",
    "Simple File Versioning": "Jednoduché verzování souborů",
-    "Single level wildcard (matches within a directory only)": "Jednoúrovňový zástupný znak (shody pouze uvnitř adresáře)",
+    "Single level wildcard (matches within a directory only)": "Jednoúrovňový zástupný znak (shody pouze uvnitř složky)",
    "Smallest First": "Od nejmenšího",
    "Source Code": "Zdrojový kód",
+    "Stable releases and release candidates": "Stabilní vydání a kandidáti na vydání",
+    "Stable releases are delayed by about two weeks. During this time they go through testing as release candidates.": "Stabilní vydání jsou opožděna zhruba o dva týdny. Po tuto dobu se testují jako kandidáti na vydání.",
+    "Stable releases only": "Pouze stabilní vydání",
    "Staggered File Versioning": "Postupné verzování souborů",
    "Start Browser": "Otevřít prohlížeč",
    "Statistics": "Statistiky",
@@ -215,7 +247,10 @@
    "This Device": "Toto zařízení",
    "This can easily give hackers access to read and change any files on your computer.": "To může útočníkům jednoduše povolit čtení a úpravy souborů na vašem přístroji. ",
    "This is a major version upgrade.": "Toto je důležitá aktualizace.",
+    "This setting controls the free space required on the home (i.e., index database) disk.": "This setting controls the free space required on the home (i.e., index database) disk.",
+    "Time": "Čas",
    "Trash Can File Versioning": "Verzování souborů v koši",
+    "Type": "Typ",
    "Unknown": "Neznámý",
    "Unshared": "Nesdílený",
    "Unused": "Nepoužitý",
@@ -226,14 +261,21 @@
    "Upgrading": "Aktualizuji",
    "Upload Rate": "Rychlost odesílání",
    "Uptime": "Celkový čas běhu",
+    "Usage reporting is always enabled for candidate releases.": "Hlášení o používání je pro kandidáty na vydání vždy zapnuto.",
    "Use HTTPS for GUI": "Použít HTTPS pro grafické rozhraní",
    "Version": "Verze",
    "Versions Path": "Cesta k verzím",
    "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "Verze jsou automaticky smazány, pokud jsou starší než maximální časový limit nebo překročí počet souborů povolených pro interval.",
-    "Warning, this path is a subdirectory of an existing folder \"{%otherFolder%}\".": "Varování: tato cesta je podadresářem existujícího adresáře \"{{otherFolder}}\".",
+    "Warning, this path is a parent directory of an existing folder \"{%otherFolder%}\".": "Varování, tato cesta je nadřazenou složkou existujícího adresáře \"{{otherFolder}}\".",
+    "Warning, this path is a parent directory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Varování, tato cesta je nadřazenou složkou existujícího adresáře \"{{otherFolderLabel}}\" ({{otherFolder}}).",
+    "Warning, this path is a subdirectory of an existing folder \"{%otherFolder%}\".": "Varování: tato cesta je podsložkou existujícího adresáře \"{{otherFolder}}\".",
+    "Warning, this path is a subdirectory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Varování, tato cesta je podsložkou existujícího adresáře \"{{otherFolderLabel}}\" ({{otherFolder}}).",
    "When adding a new device, keep in mind that this device must be added on the other side too.": "Při přidávání nového přístroje mějte na paměti, že je ho třeba také zadat na druhé straně.",
    "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Při přidávání nového adresáře mějte na paměti, že jeho ID je použito ke svázání adresářů napříč přístoji. Rozlišují se malá a velká písmena a musí přesně souhlasit mezi všemi přístroji.",
    "Yes": "Ano",
+    "You can also select one of these nearby devices:": "You can also select one of these nearby devices:",
+    "You can change your choice at any time in the Settings dialog.": "Vaši volbu můžete kdykoliv změnit v dialogu nastavení.",
+    "You can read more about the two release channels at the link below.": "O kandidátech na vydání si můžete přečíst více v odkazu níže.",
    "You must keep at least one version.": "Je třeba ponechat alespoň jednu verzi.",
    "days": "dní",
    "directories": "složek",
--- a/gui/default/assets/lang/lang-da.json
+++ b/gui/default/assets/lang/lang-da.json
@@ -1,86 +1,105 @@
 {
-    "A device with that ID is already added.": "A device with that ID is already added.",
+    "A device with that ID is already added.": "En enhed, med dette id, er allerede tilføjet.",
    "A negative number of days doesn't make sense.": "Et negativt antal dage giver ikke mening.",
    "A new major version may not be compatible with previous versions.": "En ny versionsudgivelse er måske ikke kompatibel med tidligere versioner.",
    "API Key": "API-nøgle",
    "About": "Om",
+    "Action": "Handling",
    "Actions": "Handlinger.",
    "Add": "Tilføj",
    "Add Device": "Tilføj enhed",
    "Add Folder": "Tilføj mappe",
-    "Add Remote Device": "Add Remote Device",
+    "Add Remote Device": "Tilføj fjernenhed",
+    "Add devices from the introducer to our device list, for mutually shared folders.": "Add devices from the introducer to our device list, for mutually shared folders.",
    "Add new folder?": "Tilføj ny mappe",
    "Address": "Adresse",
    "Addresses": "Adresser",
    "Advanced": "Avanceret",
    "Advanced Configuration": "Avanceret konfiguration",
-    "Advanced settings": "Advanced settings",
+    "Advanced settings": "Avancerede indstillinger",
    "All Data": "Alt data",
    "Allow Anonymous Usage Reporting?": "Tillad anonym brugerstatistik?",
+    "Allowed Networks": "Tilladte netværk",
    "Alphabetic": "Alfabetisk",
+    "An external command handles the versioning. It has to remove the file from the shared folder.": "En ekstern kommando styrer versioneringen. Den skal fjerne filen fra den delte mappe.",
    "An external command handles the versioning. It has to remove the file from the synced folder.": " ",
    "Anonymous Usage Reporting": "Anonym brugerstatistik",
    "Any devices configured on an introducer device will be added to this device as well.": "Alle enheder som er konfigueret som en introducerende enhed, vil også blive tilføjet til denne enhed.",
+    "Automatic upgrade now offers the choice between stable releases and release candidates.": "Den automatiske opdatering tilbyder nu valget mellem stabile - og udgivelses kandidater.",
    "Automatic upgrades": "Automatisk opdatering",
    "Be careful!": "Vær forsigtig!",
    "Bugs": "Fejl",
    "CPU Utilization": "CPU-forbrug",
    "Changelog": "Udgivelsesnoter",
    "Clean out after": "Rens efter",
+    "Click to see discovery failures": "Klik for at se opdagelses fejl ",
    "Close": "Luk",
    "Command": "Kommando",
    "Comment, when used at the start of a line": "Kommentering som bruges i starten af en linje",
    "Compression": "Anvend komprimering",
-    "Configured": "Configured",
+    "Configured": "Konfigureret",
    "Connection Error": "Tilslutnings fejl",
-    "Connection Type": "Connection Type",
+    "Connection Type": "Tilslutningstype",
    "Copied from elsewhere": "Kopieret fra et andet sted",
    "Copied from original": "Kopieret fra originalen",
-    "Copyright © 2014-2016 the following Contributors:": "Copyright © 2014-2016 the following Contributors:",
+    "Copyright © 2014-2016 the following Contributors:": "Copyright © 2014-2016 de følgende bidragsydere:",
+    "Copyright © 2014-2017 the following Contributors:": "Copyright © 2014-2017 de følgende bidragsydere:",
+    "Creating ignore patterns, overwriting an existing file at {%path%}.": "Creating ignore patterns, overwriting an existing file at {{path}}.",
    "Danger!": "Fare!",
    "Deleted": "Slettet",
-    "Device \"{%name%}\" ({%device%} at {%address%}) wants to connect. Add new device?": "Device \"{{name}}\" ({{device}} at {{address}}) wants to connect. Add new device?",
+    "Device": "Enhed",
+    "Device \"{%name%}\" ({%device%} at {%address%}) wants to connect. Add new device?": "Enheden\"{{name}}\" ({{device}} på {{address}}) vil gerne forbinde. Tilføj denne enhed ? ",
    "Device ID": "Enheds-ID",
    "Device Identification": "Enhedsidentifikation",
    "Device Name": "Enhedsnavn",
    "Devices": "Enheder",
    "Disconnected": "Ikke tilsluttet",
-    "Discovered": "Discovered",
+    "Discovered": "Opdaget",
    "Discovery": "Opslag",
+    "Discovery Failures": "Opdagelses Fejl ",
    "Documentation": "Dokumentation",
    "Download Rate": "Downloadhastighed",
    "Downloaded": "Downloadet",
    "Downloading": "Downloader",
    "Edit": "Rediger",
-    "Edit Device": "Edit Device",
-    "Edit Folder": "Edit Folder",
+    "Edit Device": "Rediger enhed",
+    "Edit Folder": "Rediger mappe",
    "Editing": "Redigerer",
-    "Enable NAT traversal": "Enable NAT traversal",
-    "Enable Relaying": "Enable Relaying",
+    "Editing {%path%}.": "Redigerer {{path}}.",
+    "Enable NAT traversal": "Aktiver NAT",
+    "Enable Relaying": "Aktiver Relaying",
+    "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.",
+    "Enter a non-privileged port number (1024 - 65535).": "Enter a non-privileged port number (1024 - 65535).",
    "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Angiv kommaseparerede adresser (\"tcp://ip:port\", \"tcp://host:port\") eller \"dynamic\" for at benytte automatisk opdagelse af adressen.",
    "Enter ignore patterns, one per line.": "Vælg ignorer maske, én per linje.",
    "Error": "Fejl",
    "External File Versioning": "Ekstern fil-versionskontrol",
    "Failed Items": "Mislykkede filer",
+    "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "Fejl i forbindelse med opkobling til IPv6 servere skal forventes hvis der ikke er IPv6 forbindelse. ",
    "File Pull Order": "Filhentnings rækkefølge",
    "File Versioning": "Filversionering",
    "File permission bits are ignored when looking for changes. Use on FAT file systems.": "Filtilladelses bits ignoreres når der søges efter ændringer. Bruges på FAT filsystemer.  ",
+    "Files are moved to .stversions directory when replaced or deleted by Syncthing.": "Filer bliver flyttet til .stversions mappen, når de bliver erstattet eller slettet af Syncthing.",
    "Files are moved to .stversions folder when replaced or deleted by Syncthing.": "Filer flyttes til .stversions mappen når de erstattes eller slettes af Syncthing.",
+    "Files are moved to date stamped versions in a .stversions directory when replaced or deleted by Syncthing.": "Filer er flyttet til datostemplet versioner i en .stversions mappe når de bliver erstattet eller slettet af Syncthing.",
    "Files are moved to date stamped versions in a .stversions folder when replaced or deleted by Syncthing.": "Filer flyttes til data-stemplede versioner i en .stversions mappe når de erstattes eller slettes af Syncthing.",
    "Files are protected from changes made on other devices, but changes made on this device will be sent to the rest of the cluster.": "Filer er beskyttet fra ændringer foretaget på andre enheder, men ændringerne på denne enhed vil blive sendt til alle andre tilknyttede enheder.",
    "Folder": "Mappe",
    "Folder ID": "Mappe-ID",
-    "Folder Label": "Folder Label",
+    "Folder Label": "Mappelabel",
    "Folder Path": "Mappesti",
-    "Folder Type": "Folder Type",
+    "Folder Type": "Mappetype",
    "Folders": "Mapper",
    "GUI": "GUI",
    "GUI Authentication Password": "GUI-kodeord",
    "GUI Authentication User": "GUI-brugernavn",
+    "GUI Listen Address": "GUI Listen Address",
    "GUI Listen Addresses": "GUI-lytteadresse",
+    "GUI Theme": "GUI tema",
    "Generate": "Opret",
+    "Global Changes": "Globale ændringer",
    "Global Discovery": "Globalt opslag",
-    "Global Discovery Servers": "Global Discovery Servers",
+    "Global Discovery Servers": "Globale opslags servere",
    "Global State": "Global tilstand",
    "Help": "Hjælp",
    "Home page": "Hjem",
@@ -89,21 +108,23 @@
    "Ignore Permissions": "Ignorér filrettigheder",
    "Incoming Rate Limit (KiB/s)": "Indgående hastighedsbegrænsning (KiB/s)",
    "Incorrect configuration may damage your folder contents and render Syncthing inoperable.": "Ukorrekt opsætning kan skade dine data og gøre Syncthing ude af stand til at fungere.",
+    "Introduced By": "Introduceret af",
    "Introducer": "Introducerende enhed",
    "Inversion of the given condition (i.e. do not exclude)": "Det omvendte (dvs. undlad ikke)",
    "Keep Versions": "Behold versioner",
    "Largest First": "Største først",
    "Last File Received": "Sidste modtaget fil",
-    "Last Scan": "Last Scan",
+    "Last Scan": "Sidste skanning.",
    "Last seen": "Sidst set",
    "Later": "Senere",
-    "Latest Change": "Latest Change",
-    "Listeners": "Listeners",
+    "Latest Change": "Sidste ændring",
+    "Learn more": "Lær mere",
+    "Listeners": "Lyttere",
    "Local Discovery": "Lokal opslag",
    "Local State": "Lokal tilstand",
    "Local State (Total)": "Lokal tilstand (total)",
    "Major Upgrade": "Ny version",
-    "Master": "Master",
+    "Master": "Mester ",
    "Maximum Age": "Maks alder",
    "Metadata Only": "Kun metadata",
    "Minimum Free Disk Space": "Mindst ledig diskplads",
@@ -115,34 +136,41 @@
    "Newest First": "Nyeste først",
    "No": "Nej",
    "No File Versioning": "Ingen filversion",
+    "No upgrades": "Ingen opgraderinger",
    "Normal": "Normal",
    "Notice": "OBS",
    "OK": "OK",
    "Off": "Slå fra",
    "Oldest First": "Ældste først",
-    "Optional descriptive label for the folder. Can be different on each device.": "Optional descriptive label for the folder. Can be different on each device.",
+    "Optional descriptive label for the folder. Can be different on each device.": "En frivillig beskrivelse af mappen. Kan være forskellig på hver enkelt enhed.",
    "Options": "Indstillinger",
    "Out of Sync": "Ikke synkroniseret",
    "Out of Sync Items": "Endnu ikke synkroniserede filer",
    "Outgoing Rate Limit (KiB/s)": "Udgående hastighedsbegrænsning (KiB/s)",
    "Override Changes": "Overskriv ændringer",
+    "Path": "Sti",
    "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Sti til den lokale mappe. Vil blive oprettet hvis den ikke findes. Tilde tegnet (~) kan bruges som en forkortelse for",
+    "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).": "Sti hvor versioner skal gemmes ( lad dette felt være tom for at bruge .stversions mappen i den delte mappe)",
    "Path where versions should be stored (leave empty for the default .stversions folder in the folder).": "Sti hvor versioner skal gemmes (efterlad tom for default .stversions mappe)",
    "Pause": "Pause",
+    "Pause All": "Sæt alt på pause",
    "Paused": "Pauset",
    "Please consult the release notes before performing a major upgrade.": "Tjek venligst udgivelsesnoterne før opgradering til en ny version.",
    "Please set a GUI Authentication User and Password in the Settings dialog.": "Sæt vensligt en GUI bruger og kodeord i opsætningsdialogen.",
    "Please wait": "Vent venligst",
+    "Prefix indicating that the file can be deleted if preventing directory removal": "Prefix indicating that the file can be deleted if preventing directory removal",
+    "Prefix indicating that the pattern should be matched without case sensitivity": "Prefix indicating that the pattern should be matched without case sensitivity",
    "Preview": "Forhåndsvisning",
    "Preview Usage Report": "Forhåndsvisning af forbrugsrapport",
    "Quick guide to supported patterns": "Hurtig guide til supporteret mønstre",
    "RAM Utilization": "RAM-forbrug",
    "Random": "Tilfældig",
-    "Reduced by ignore patterns": "Reduced by ignore patterns",
+    "Reduced by ignore patterns": "Reduceret af ignorerings mønsteret. ",
    "Release Notes": "Udgivelsesnoter",
-    "Remote Devices": "Remote Devices",
+    "Release candidates contain the latest features and fixes. They are similar to the traditional bi-weekly Syncthing releases.": "Udgivelseskandidater indeholder alle de nyeste funktioner og rettelser. De er ens med de traditionelle 2 ugers Syncthing udgivelser.",
+    "Remote Devices": "Fjernenheder ",
    "Remove": "Fjern",
-    "Required identifier for the folder. Must be the same on all cluster devices.": "Required identifier for the folder. Must be the same on all cluster devices.",
+    "Required identifier for the folder. Must be the same on all cluster devices.": "Nødvendig identifikation af mappen. Dette skal være det samme på alle enheder.",
    "Rescan": "Skan igen",
    "Rescan All": "Skan alt igen",
    "Rescan Interval": "Genskannings interval",
@@ -150,14 +178,15 @@
    "Restart Needed": "Programmet kræver genstart",
    "Restarting": "Genstarter",
    "Resume": "Genoptag",
+    "Resume All": "Genoptag alt",
    "Reused": "Genbrugt",
    "Save": "Gem",
    "Scan Time Remaining": "Tid tilbage af skanningen",
    "Scanning": "Opdaterer",
    "Select the devices to share this folder with.": "Vælg hvilke enheder du vil dele denne mappe med",
    "Select the folders to share with this device.": "Vælg hvilke mapper du vil dele med denne enhed.",
-    "Send & Receive": "Send & Receive",
-    "Send Only": "Send Only",
+    "Send & Receive": "Send & Modtag",
+    "Send Only": "Send Kun",
    "Settings": "Indstillinger",
    "Share": "Del",
    "Share Folder": "Delt mappe",
@@ -166,7 +195,7 @@
    "Share this folder?": "Del denne mappe",
    "Shared With": "Delt med",
    "Show ID": "Vis ID",
-    "Show QR": "Show QR",
+    "Show QR": "Vis QR",
    "Shown instead of Device ID in the cluster status. Will be advertised to other devices as an optional default name.": "Vist istedet for Enheds ID i klynge status. Vil blive vist på andre enheder som valgfrit standard navn.",
    "Shown instead of Device ID in the cluster status. Will be updated to the name the device advertises if left empty.": "Vist istedet for Enheds ID i klynge status. Vil blive opdateret til det navn som enheden viser, hvis det ikke er udfyldt.",
    "Shutdown": "Luk ned",
@@ -175,6 +204,9 @@
    "Single level wildcard (matches within a directory only)": "Enkeltnivau wildcard (matcher kun inden for en mapp)",
    "Smallest First": "Mindste først",
    "Source Code": "Kildekode",
+    "Stable releases and release candidates": "Stabile udgivelser og udgivelseskandidater ",
+    "Stable releases are delayed by about two weeks. During this time they go through testing as release candidates.": "Stabile udgivelser er forsinket med omkring 2 uger. I denne periode gennemgår de tests som udgivelseskandidater. ",
+    "Stable releases only": "Kun stabile udgivelser",
    "Staggered File Versioning": "Forskudte filversioner",
    "Start Browser": "Start browser",
    "Statistics": "Statistikker",
@@ -189,10 +221,10 @@
    "Syncthing seems to be down, or there is a problem with your Internet connection. Retrying…": "Syncthing ser ud til at være stoppet eller oplever problemer med din internetforbindels. Prøver igen...",
    "Syncthing seems to be experiencing a problem processing your request. Please refresh the page or restart Syncthing if the problem persists.": "Det ser ud til at Syncthiing har problemer med at udføre opgaven. Prøv at genopfriske siden eller genstarte Synching hvis problemet vedbliver.",
    "The Syncthing admin interface is configured to allow remote access without a password.": "Syncthing administationsdelen er konfigureret til at blive fjernstyret uden kodeord.",
-    "The aggregated statistics are publicly available at the URL below.": "The aggregated statistics are publicly available at the URL below.",
+    "The aggregated statistics are publicly available at the URL below.": "Den indsamlede statistik er offentlig tilgængelig på den nedenstående URL.",
    "The configuration has been saved but not activated. Syncthing must restart to activate the new configuration.": "Konfigurationen er gemt, men ikke aktiveret. Syncthing skal genstarte for at aktivere den nye konfiguration.",
    "The device ID cannot be blank.": "Enhedens ID må ikke være tom.",
-    "The device ID to enter here can be found in the \"Actions > Show ID\" dialog on the other device. Spaces and dashes are optional (ignored).": "The device ID to enter here can be found in the \"Actions > Show ID\" dialog on the other device. Spaces and dashes are optional (ignored).",
+    "The device ID to enter here can be found in the \"Actions > Show ID\" dialog on the other device. Spaces and dashes are optional (ignored).": "Det enheds ID som skal indtastes her kan findes under menuen \"Handlinger > Vis ID\" på den anden enhed. Mellemrum og streger er frivillige. (De bliver ignoreret) ",
    "The encrypted usage report is sent daily. It is used to track common platforms, folder sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.": "Den krypterede forbrugsrapport sendes dagligt. Den benyttes til at spore anvendte platforme, mappestørrelser og versioner. Hvis det typen af opsamlet data ændres på et senere tidspunkt, vil du blive spurgt om tilladelse igen.",
    "The entered device ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.": "Det indtastede node ID ser ikke gyldigt ud. Det skal være en 52 eller 56 tegn streng, bestående af tal og bogstaver, eventuelt med mellemrum og bindestreger.",
    "The first command line parameter is the folder path and the second parameter is the relative path in the folder.": "Den første kommandolinjeparameter er mappestien og den anden parameter er den relative sti til mappen.",
@@ -212,10 +244,13 @@
    "The rate limit must be a non-negative number (0: no limit)": "Ratebegrænsningen må ikke være negative tal (0: ingen begrænsning)",
    "The rescan interval must be a non-negative number of seconds.": "Genskanningsintervallet skal være et ikke-negativt antal sekunder",
    "They are retried automatically and will be synced when the error is resolved.": "De prøves igen automatisk og vil blive synkroniseret når fejlen er løst.",
-    "This Device": "This Device",
+    "This Device": "Denne Enhed",
    "This can easily give hackers access to read and change any files on your computer.": "Dette gør det nemt for hackere at få adgang til at læse og ændre filer på din computer.",
    "This is a major version upgrade.": "Dette er en ny version",
+    "This setting controls the free space required on the home (i.e., index database) disk.": "This setting controls the free space required on the home (i.e., index database) disk.",
+    "Time": "Tid",
    "Trash Can File Versioning": "Skraldespand fil versioner",
+    "Type": "Type",
    "Unknown": "Ukendt",
    "Unshared": "Ikke delt",
    "Unused": "Ubrugt",
@@ -226,20 +261,27 @@
    "Upgrading": "Opgradere",
    "Upload Rate": "Uploadhastighed",
    "Uptime": "Oppetid",
+    "Usage reporting is always enabled for candidate releases.": "Forbrugsraportering er altid slået til for udgivelseskandidater.",
    "Use HTTPS for GUI": "Anvend HTTPS til GUI adgang",
    "Version": "Version",
    "Versions Path": "Versions-sti",
    "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "Versioner slettes automatisk, hvis de er ældre end den satte maksimum alder eller overstiger det tilladte antal filer i et interval.",
-    "Warning, this path is a subdirectory of an existing folder \"{%otherFolder%}\".": "Warning, this path is a subdirectory of an existing folder \"{{otherFolder}}\".",
+    "Warning, this path is a parent directory of an existing folder \"{%otherFolder%}\".": "Advarsel, denne sti er en rodmappe til den eksisterende mappe \"{{otherFolder}}\".",
+    "Warning, this path is a parent directory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Advarsel, denne sti er en rodmappe til den eksisterende mappe \"{{otherFolderLabel}}\" ({{otherFolder}}).",
+    "Warning, this path is a subdirectory of an existing folder \"{%otherFolder%}\".": "Advarsel, denne sti er en undermappe af en eksisterende mappe \"{{otherFolder}}\".",
+    "Warning, this path is a subdirectory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Advarsel, denne sti er en undermappe af en eksisterende mappe \"{{otherFolderLabel}}\" ({{otherFolder}}).",
    "When adding a new device, keep in mind that this device must be added on the other side too.": "Når der tilføjes en ny enhed, vær da opmærksom på, at denne enhed også skal tilføjes på den anden side.",
    "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Når der tilføjes en ny enhed, vær da opmærksom på at samme ID bruges til at forbinde mapperne på de forskellige enheder. Der er forskel på store og små bogstaver, og ID skal være fuldstændig identisk på alle enheder.",
    "Yes": "Ja",
+    "You can also select one of these nearby devices:": "You can also select one of these nearby devices:",
+    "You can change your choice at any time in the Settings dialog.": "Du kan altid ændre dit valg under indstillinger.",
+    "You can read more about the two release channels at the link below.": "Du kan læse mere om de to udgivelseskanaler på links herunder.",
    "You must keep at least one version.": "Du skal beholde mindst én version.",
    "days": "dage",
-    "directories": "directories",
-    "files": "files",
+    "directories": "mapper",
+    "files": "filer",
    "full documentation": "Fuld dokumentation",
    "items": "poster",
    "{%device%} wants to share folder \"{%folder%}\".": "{{device}} ønsker at dele mappen \"{{folder}}\". ",
-    "{%device%} wants to share folder \"{%folderlabel%}\" ({%folder%}).": "{{device}} wants to share folder \"{{folderlabel}}\" ({{folder}})."
+    "{%device%} wants to share folder \"{%folderlabel%}\" ({%folder%}).": "{{device}} vil gerne dele mappen \"{{folderlabel}}\" ({{folder}})."
 }
--- a/gui/default/assets/lang/lang-de.json
+++ b/gui/default/assets/lang/lang-de.json
@@ -4,11 +4,13 @@
    "A new major version may not be compatible with previous versions.": "Die neue Hauptversion ist evtl. nicht mit vorherigen Versionen kompatibel.",
    "API Key": "API-Schlüssel",
    "About": "Über",
+    "Action": "Aktion",
    "Actions": "Aktionen",
    "Add": "Hinzufügen",
    "Add Device": "Gerät hinzufügen",
    "Add Folder": "Ordner hinzufügen",
-    "Add Remote Device": "Fern-Gerät hinzufügen",
+    "Add Remote Device": "Gerät hinzufügen",
+    "Add devices from the introducer to our device list, for mutually shared folders.": "Add devices from the introducer to our device list, for mutually shared folders.",
    "Add new folder?": "Neuen Ordner hinzufügen?",
    "Address": "Adresse",
    "Addresses": "Adressen",
@@ -17,16 +19,20 @@
    "Advanced settings": "Erweiterte Einstellungen",
    "All Data": "Alle Daten",
    "Allow Anonymous Usage Reporting?": "Übertragung von anonymen Nutzungsberichten erlauben?",
+    "Allowed Networks": "Erlaubte Netzwerke",
    "Alphabetic": "Alphabetisch",
+    "An external command handles the versioning. It has to remove the file from the shared folder.": "Ein externer Befehl führt die Versionierung durch. Dazu muss die Datei aus dem geteilten Ordner entfernt werden.",
    "An external command handles the versioning. It has to remove the file from the synced folder.": "Ein externer Programmaufruf handhabt die Versionierung. Es muss die Datei aus dem zu synchronisierendem Ordner entfernen.",
    "Anonymous Usage Reporting": "Anonymer Nutzungsbericht",
    "Any devices configured on an introducer device will be added to this device as well.": "Alle Geräte, die beim Verteiler eingetragen sind, werden auch bei diesem Gerät eingetragen",
+    "Automatic upgrade now offers the choice between stable releases and release candidates.": "Die automatische Aktualisierung bietet jetzt die Wahl zwischen stabilen Veröffentlichungen und Veröffentlichungskandidaten.",
    "Automatic upgrades": "Automatische Updates aktivieren",
    "Be careful!": "Vorsicht!",
    "Bugs": "Fehler",
    "CPU Utilization": "Prozessorauslastung",
    "Changelog": "Änderungsprotokoll",
    "Clean out after": "Löschen nach",
+    "Click to see discovery failures": "Zum Anzeigen von Gerätesuchfehlern klicken",
    "Close": "Schließen",
    "Command": "Befehl",
    "Comment, when used at the start of a line": "Kommentar, wenn am Anfang der Zeile benutzt.",
@@ -37,8 +43,11 @@
    "Copied from elsewhere": "Von anderer Quelle kopiert",
    "Copied from original": "Vom Original kopiert",
    "Copyright © 2014-2016 the following Contributors:": "Copyright © 2014-2016 der folgenden Unterstützer:",
+    "Copyright © 2014-2017 the following Contributors:": "Copyright © 2014-2017 der folgenden Unterstützer:",
+    "Creating ignore patterns, overwriting an existing file at {%path%}.": "Creating ignore patterns, overwriting an existing file at {{path}}.",
    "Danger!": "Achtung!",
    "Deleted": "Gelöscht",
+    "Device": "Gerät",
    "Device \"{%name%}\" ({%device%} at {%address%}) wants to connect. Add new device?": "Gerät \"{{name}}\" ({{device}} {{address}}) möchte sich verbinden. Gerät hinzufügen?",
    "Device ID": "Gerätekennung",
    "Device Identification": "Geräteidentifikation",
@@ -47,6 +56,7 @@
    "Disconnected": "Getrennt",
    "Discovered": "Ermittelt",
    "Discovery": "Gerätesuche",
+    "Discovery Failures": "Gerätesuchfehler",
    "Documentation": "Dokumentation",
    "Download Rate": "Download",
    "Downloaded": "Heruntergeladen",
@@ -55,17 +65,23 @@
    "Edit Device": "Gerät bearbeiten",
    "Edit Folder": "Ordner bearbeiten",
    "Editing": "Bearbeitet",
+    "Editing {%path%}.": "{{path}} wird bearbeitet.",
    "Enable NAT traversal": "NAT-Durchdringung aktivieren",
    "Enable Relaying": "Weiterleitung aktivieren",
+    "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.",
+    "Enter a non-privileged port number (1024 - 65535).": "Enter a non-privileged port number (1024 - 65535).",
    "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Kommagetrennte Adressen (\"tcp://ip:port\", \"tcp://host:port\") oder \"dynamic\" eingeben, um die Adresse automatisch zu ermitteln.",
    "Enter ignore patterns, one per line.": "Geben Sie Ignoriermuster ein, eines pro Zeile.",
    "Error": "Fehler",
    "External File Versioning": "Externe Dateiversionierung",
    "Failed Items": "Fehlgeschlagene Objekte",
+    "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "Es wird ein Verbindungsfehler zu IPv6-Servern erwartet, wenn es keine IPv6-Konnektivität gibt.",
    "File Pull Order": "Dateiübertragungsreihenfolge",
    "File Versioning": "Dateiversionierung",
    "File permission bits are ignored when looking for changes. Use on FAT file systems.": "Dateizugriffsrechte beim Suchen nach Veränderungen ignorieren. Bei FAT-Dateisystemen zu verwenden.",
+    "Files are moved to .stversions directory when replaced or deleted by Syncthing.": "Dateien werden in das .stversions-Verzeichnis verschoben, wenn sie von Syncthing ersetzt oder gelöscht werden.",
    "Files are moved to .stversions folder when replaced or deleted by Syncthing.": "Wenn Syncthing Dateien ersetzt oder löscht, werden sie in den Ordner .stversions verschoben.",
+    "Files are moved to date stamped versions in a .stversions directory when replaced or deleted by Syncthing.": "Dateien werden mit einem Datumsstempel im Namen versehen und in ein .stversions-Verzeichnis verschoben, wenn sie von Syncthing ersetzt oder gelöscht werden.",
    "Files are moved to date stamped versions in a .stversions folder when replaced or deleted by Syncthing.": "Dateien werden, bevor Syncthing sie löscht oder ersetzt, datiert in den Ordner .stversions verschoben.",
    "Files are protected from changes made on other devices, but changes made on this device will be sent to the rest of the cluster.": "Dateien sind auf diesem Gerät schreibgeschützt. Auf diesem Gerät durchgeführte Veränderungen werden aber auf den Rest des Verbunds übertragen.",
    "Folder": "Ordner",
@@ -77,8 +93,11 @@
    "GUI": "GUI",
    "GUI Authentication Password": "Passwort für Zugang zur Benutzeroberfläche",
    "GUI Authentication User": "Nutzername für Zugang zur Benutzeroberfläche",
+    "GUI Listen Address": "GUI Listen Address",
    "GUI Listen Addresses": "Adresse(n) für die Benutzeroberfläche",
+    "GUI Theme": "GUI-Theme",
    "Generate": "Generieren",
+    "Global Changes": "Globale Änderungen",
    "Global Discovery": "Globale Gerätesuche",
    "Global Discovery Servers": "Globale Gerätesuchserver",
    "Global State": "Globaler Status",
@@ -89,6 +108,7 @@
    "Ignore Permissions": "Berechtigungen ignorieren",
    "Incoming Rate Limit (KiB/s)": "Limit Datenrate (eingehend) (KB/s)",
    "Incorrect configuration may damage your folder contents and render Syncthing inoperable.": "Eine falsche Konfiguration kann den Ordnerinhalt beschädigen und Syncthing in einen unausführbaren Zustand versetzen.",
+    "Introduced By": "Verteilt von",
    "Introducer": "Verteilergerät",
    "Inversion of the given condition (i.e. do not exclude)": "Umkehrung der angegebenen Bedingung (z.B. schließe nicht aus)",
    "Keep Versions": "Versionen erhalten",
@@ -98,6 +118,7 @@
    "Last seen": "Zuletzt online",
    "Later": "Später",
    "Latest Change": "Letzte Änderung",
+    "Learn more": "Mehr erfahren",
    "Listeners": "Zuhörer",
    "Local Discovery": "Lokale Gerätesuche",
    "Local State": "Lokaler Status",
@@ -115,6 +136,7 @@
    "Newest First": "Neueste zuerst",
    "No": "Nein",
    "No File Versioning": "Keine Dateiversionierung",
+    "No upgrades": "Keine Upgrades",
    "Normal": "Normal",
    "Notice": "Hinweis",
    "OK": "OK",
@@ -126,13 +148,18 @@
    "Out of Sync Items": "Nicht synchronisierte Objekte",
    "Outgoing Rate Limit (KiB/s)": "Limit Datenrate (ausgehend) (KB/s)",
    "Override Changes": "Änderungen überschreiben",
+    "Path": "Pfad",
    "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Pfad zum Ordner auf dem lokalen Gerät. Ordner wird erzeugt, wenn er nicht existiert. Das Tilden-Zeichen (~) kann als Abkürzung benutzt werden für",
+    "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).": "Pfad, in dem Versionen gespeichert werden sollen (leer lassen, wenn das Standard-.stversions-Verzeichnis im geteilten Ordner verwendet werden soll).",
    "Path where versions should be stored (leave empty for the default .stversions folder in the folder).": "Pfad in dem alte Dateiversionen gespeichert werden sollen (ohne Angabe wird der Ordner .stversions im Ordner verwendet).",
    "Pause": "Pause",
+    "Pause All": "Alles pausieren",
    "Paused": "Pausiert",
    "Please consult the release notes before performing a major upgrade.": "Bitte lesen Sie die Veröffentlichungsnotizen bevor Sie eine neue Hauptversion installieren.",
    "Please set a GUI Authentication User and Password in the Settings dialog.": "Bitte setze einen Benutzer und ein Passwort für das GUI in den Einstellungen.",
    "Please wait": "Bitte warten",
+    "Prefix indicating that the file can be deleted if preventing directory removal": "Prefix indicating that the file can be deleted if preventing directory removal",
+    "Prefix indicating that the pattern should be matched without case sensitivity": "Prefix indicating that the pattern should be matched without case sensitivity",
    "Preview": "Vorschau",
    "Preview Usage Report": "Vorschau des Nutzungsberichts",
    "Quick guide to supported patterns": "Schnellanleitung zu den unterstützten Mustern",
@@ -140,6 +167,7 @@
    "Random": "Zufall",
    "Reduced by ignore patterns": "Durch Ignoriermuster reduziert",
    "Release Notes": "Veröffentlichungsnotizen",
+    "Release candidates contain the latest features and fixes. They are similar to the traditional bi-weekly Syncthing releases.": "Veröffentlichungskandidaten enthalten die neuesten Funktionen und Verbesserungen. Sie ähneln den traditionellen zweiwöchentlichen Syncthing-Veröffentlichungen.",
    "Remote Devices": "Fern-Geräte",
    "Remove": "Entfernen",
    "Required identifier for the folder. Must be the same on all cluster devices.": "Erforderlicher Bezeichner für den Ordner. Muss auf allen Verbund-Geräten gleich sein.",
@@ -149,7 +177,8 @@
    "Restart": "Neustart",
    "Restart Needed": "Neustart benötigt",
    "Restarting": "Wird neu gestartet",
-    "Resume": "Fortfahren",
+    "Resume": "Fortsetzen",
+    "Resume All": "Alles fortsetzen",
    "Reused": "Erneut benutzt",
    "Save": "Speichern",
    "Scan Time Remaining": "Zeit für Scan verbleibend",
@@ -165,7 +194,7 @@
    "Share With Devices": "Teile mit diesen Geräten",
    "Share this folder?": "Diesen Ordner teilen?",
    "Shared With": "Geteilt mit",
-    "Show ID": "Kennung anzeigen",
+    "Show ID": "Eigene Kennung",
    "Show QR": "Zeige QR Code",
    "Shown instead of Device ID in the cluster status. Will be advertised to other devices as an optional default name.": "Wird anstatt der Gerätekennung im Verbund-Status angezeigt. Wird als optionaler Standardname an andere Geräte bekannt gegeben.",
    "Shown instead of Device ID in the cluster status. Will be updated to the name the device advertises if left empty.": "Wird auf diesem Gerät als Gerätename angezeigt und an die anderen Geräte im Geräte-Verbund weitergegeben. Wenn kein Gerätename anegegeben wird, wird der Name des entfernten Gerätes genommen.",
@@ -175,6 +204,9 @@
    "Single level wildcard (matches within a directory only)": "Einzelnes Maskenzeichen (wird für einen einzelnen Ordner verwendet)",
    "Smallest First": "Kleinstes zuerst",
    "Source Code": "Quellcode",
+    "Stable releases and release candidates": "Stabile Veröffentlichungen und Veröffentlichungskandidaten",
+    "Stable releases are delayed by about two weeks. During this time they go through testing as release candidates.": "Stabile Veröffentlichungen werden ca. 2 Wochen zurückgehalten. Während dieser Zeit durchlaufen sie eine Testphase als Veröffentlichungskandidaten.",
+    "Stable releases only": "Ausschließlich stabile Veröffentlichungen",
    "Staggered File Versioning": "Stufenweise Dateiversionierung",
    "Start Browser": "Browser starten",
    "Statistics": "Statistiken",
@@ -215,7 +247,10 @@
    "This Device": "Dieses Gerät",
    "This can easily give hackers access to read and change any files on your computer.": "Dies kann dazu führen, dass Unberechtigte relativ einfach auf Ihre Dateien zugreifen und diese ändern können.",
    "This is a major version upgrade.": "Dies ist eine neue Hauptversion.",
+    "This setting controls the free space required on the home (i.e., index database) disk.": "This setting controls the free space required on the home (i.e., index database) disk.",
+    "Time": "Zeit",
    "Trash Can File Versioning": "Papierkorb Dateiversionierung",
+    "Type": "Typ",
    "Unknown": "Unbekannt",
    "Unshared": "Ungeteilt",
    "Unused": "Ungenutzt",
@@ -226,14 +261,21 @@
    "Upgrading": "Wird aktualisiert",
    "Upload Rate": "Upload",
    "Uptime": "Betriebszeit",
+    "Usage reporting is always enabled for candidate releases.": "Nutzungsauswertung ist für Veröffentlichungskandidaten immer aktiviert.",
    "Use HTTPS for GUI": "HTTPS für Benutzeroberfläche benutzen",
    "Version": "Version",
    "Versions Path": "Versionierungspfad",
    "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "Alte Dateiversionen werden automatisch gelöscht, wenn sie älter als das angegebene Höchstalter sind oder die angegebene Höchstzahl an Dateien erreicht ist.",
+    "Warning, this path is a parent directory of an existing folder \"{%otherFolder%}\".": "Warnung, dieser Pfad ist ein übergeordnetes Verzeichnis eines existierenden Ordners \"{{otherFolder}}\".",
+    "Warning, this path is a parent directory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Warnung, dieser Pfad ist ein übergeordnetes Verzeichnis eines existierenden Ordners \"{{otherFolderLabel}}\" ({{otherFolder}}).",
    "Warning, this path is a subdirectory of an existing folder \"{%otherFolder%}\".": "Warnung, dieser Pfad ist ein Unterordner des existierenden Ordners \"{{otherFolder}}\".",
+    "Warning, this path is a subdirectory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Warnung, dieser Pfad ist ein Unterverzeichnis eines existierenden Ordners \"{{otherFolderLabel}}\" ({{otherFolder}}).",
    "When adding a new device, keep in mind that this device must be added on the other side too.": "Beachte beim Hinzufügen eines neuen Gerätes, dass dieses Gerät auch auf den anderen Geräten hinzugefügt werden muss.",
    "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Beachte bitte beim Hinzufügen eines neuen Ordners, dass die Ordnerkennung dazu verwendet wird, Ordner zwischen Geräten zu verbinden. Die Kennung muss also auf allen Geräten gleich sein, die Groß- und Kleinschreibung muss dabei beachtet werden.",
    "Yes": "Ja",
+    "You can also select one of these nearby devices:": "You can also select one of these nearby devices:",
+    "You can change your choice at any time in the Settings dialog.": "Sie können Ihre Wahl jederzeit in den Einstellungen ändern.",
+    "You can read more about the two release channels at the link below.": "Über den untenstehenden Link können Sie mehr über die zwei Veröffentlichungskanäle erfahren.",
    "You must keep at least one version.": "Du musst mindestens eine Version behalten.",
    "days": "Tage",
    "directories": "Ordner",
--- a/gui/default/assets/lang/lang-el.json
+++ b/gui/default/assets/lang/lang-el.json
@@ -4,11 +4,13 @@
    "A new major version may not be compatible with previous versions.": "Μια νέα σημαντική έκδοση μπορεί να μην είναι συμβατή με τις προηγούμενες εκδόσεις.",
    "API Key": "Κλειδί API",
    "About": "Σχετικά με το Syncthing",
+    "Action": "Ενέργεια",
    "Actions": "Ενέργειες",
    "Add": "Προσθήκη",
    "Add Device": "Προσθήκη συσκευής",
    "Add Folder": "Προσθήκη φακέλου",
    "Add Remote Device": "Προσθήκη Απομακρυσμένης Συσκευής",
+    "Add devices from the introducer to our device list, for mutually shared folders.": "Προσθήκη συσκευών από το Βασικό κόμβο στη λίστα συσκευών μας, για όσους κοινούς φακέλους υπάρχουν μεταξύ τους.",
    "Add new folder?": "Προσθήκη νέου φακέλου;",
    "Address": "Διεύθυνση",
    "Addresses": "Διευθύνσεις",
@@ -17,16 +19,20 @@
    "Advanced settings": "Προχωρημένες ρυθμίσεις",
    "All Data": "Όλα τα δεδομένα",
    "Allow Anonymous Usage Reporting?": "Να επιτρέπεται η αποστολή ανώνυμων στοιχείων χρήσης;",
+    "Allowed Networks": "Επιτρεπόμενα δίκτυα",
    "Alphabetic": "Αλφαβητικά",
+    "An external command handles the versioning. It has to remove the file from the shared folder.": "Μια εξωτερική εντολή χειρίζεται την τήρηση εκδόσεων και αναλαμβάνει να αφαιρέσει το αρχείο από τον συγχρονισμένο φάκελο.",
    "An external command handles the versioning. It has to remove the file from the synced folder.": "Μια εξωτερική εντολή χειρίζεται την διαχείριση εκδόσεων. Χρειάζεται να αφαιρέσει το αρχείο από το φάκελο συγχρονισμένων.",
    "Anonymous Usage Reporting": "Ανώνυμα στοιχεία χρήσης",
    "Any devices configured on an introducer device will be added to this device as well.": "Αν δηλωθεί σαν «βασικός κόμβος», τότε όλες οι συσκευές που είναι δηλωμένες εκεί θα υπάρχουν και στον τοπικό κόμβο.",
+    "Automatic upgrade now offers the choice between stable releases and release candidates.": "Για τις αυτόματες αναβαθμίσεις μπορείτε πλέον να επιλέξετε μεταξύ σταθερών εκδόσεων και υποψήφιων εκδόσεων.",
    "Automatic upgrades": "Αυτόματη αναβάθμιση",
    "Be careful!": "Με προσοχή!",
    "Bugs": "Bugs",
    "CPU Utilization": "Επιβάρυνση του επεξεργαστή",
    "Changelog": "Πληροφορίες εκδόσεων",
    "Clean out after": "Εκκαθάριση μετά από",
+    "Click to see discovery failures": "Πατήστε για να δείτε τις αποτυχίες ανεύρεσης συσκευών",
    "Close": "Τέλος",
    "Command": "Εντολή",
    "Comment, when used at the start of a line": "Σχόλιο, όταν χρησιμοποιείται στην αρχή μιας γραμμής",
@@ -37,8 +43,11 @@
    "Copied from elsewhere": "Έχει αντιγραφεί από κάπου αλλού",
    "Copied from original": "Έχει αντιγραφεί από το πρωτότυπο",
    "Copyright © 2014-2016 the following Contributors:": "Copyright © 2014-2016 για τους παρακάτω συνεισφέροντες:",
+    "Copyright © 2014-2017 the following Contributors:": "Copyright © 2014-2017 για τους παρακάτω συνεισφέροντες:",
+    "Creating ignore patterns, overwriting an existing file at {%path%}.": "Δημιουργία προτύπων αγνόησης, αντικατάσταση του υπάρχοντος αρχείου στο {{path}}.",
    "Danger!": "Προσοχή!",
    "Deleted": "Διαγραμμένα",
+    "Device": "Συσκευή",
    "Device \"{%name%}\" ({%device%} at {%address%}) wants to connect. Add new device?": "Η συσκευή \"{{name}}\" ({{device}} στη διεύθυνση {{address}}) επιθυμεί να συνδεθεί. Προσθήκη της νέας συσκευής;",
    "Device ID": "Ταυτότητα συσκευής",
    "Device Identification": "Ταυτότητα συσκευής",
@@ -47,6 +56,7 @@
    "Disconnected": "Αποσυνδεδεμένος",
    "Discovered": "Βάσει ανεύρεσης",
    "Discovery": "Ανεύρεση συσκευών",
+    "Discovery Failures": "Αποτυχίες ανεύρεσης συσκευών",
    "Documentation": "Τεκμηρίωση",
    "Download Rate": "Ταχύτητα λήψης",
    "Downloaded": "Έχει ληφθεί",
@@ -55,17 +65,23 @@
    "Edit Device": "Επεξεργασία συσκευής",
    "Edit Folder": "Επεξεργασία φακέλου",
    "Editing": "Επεξεργασία σε εξέλιξη",
+    "Editing {%path%}.": "Επεξεργασία του {{path}}.",
    "Enable NAT traversal": "Ενεργοποίηση διάσχισης NAT",
    "Enable Relaying": "Ενεργοποίηση αναμετάδοσης",
+    "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Εισάγετε έναν μη αρνητικό αριθμό (π.χ. «2.35») και επιλέξτε μια μονάδα μέτρησης. Τα ποσοστά ισχύουν ως προς το συνολικό μέγεθος του δίσκου.",
+    "Enter a non-privileged port number (1024 - 65535).": "Εισάγετε τον αριθμό μιας μη δεσμευμένης θύρας (1024 - 65535).",
    "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Εισάγετε τις διευθύνσεις χωρισμένες με κόμμα (\"tcp://ip:port\", \"tcp://host:port\") ή γράψτε \"dynamic\" για την αυτόματη ανεύρεση τους.",
    "Enter ignore patterns, one per line.": "Δώσε τα πρότυπα που θα αγνοηθούν, ένα σε κάθε γραμμή.",
    "Error": "Σφάλμα",
    "External File Versioning": "Εξωτερική τήρηση εκδόσεων",
    "Failed Items": "Αρχεία που απέτυχαν",
+    "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "Είναι φυσιολογική η αποτυχία σύνδεσης σε εξυπηρετητές IPv6 όταν δεν υπάρχει συνδεσιμότητα IPv6.",
    "File Pull Order": "Σειρά με την οποία θα κατεβαίνουν τα αρχεία",
-    "File Versioning": "Τήρηση εκδόσεων",
+    "File Versioning": "Τήρηση εκδόσεων αρχείων",
    "File permission bits are ignored when looking for changes. Use on FAT file systems.": "Τα δικαιώματα των αρχείων θα αγνοούνται όταν κοιτάζω για αλλαγές. Αφορά συστήματα αρχείων FAT.",
+    "Files are moved to .stversions directory when replaced or deleted by Syncthing.": "Τα αρχεία που σβήνονται ή αντικαθίστανται από το Syncthing μετακινούνται στον κατάλογο .stversions.",
    "Files are moved to .stversions folder when replaced or deleted by Syncthing.": "Τα αρχεία που σβήνονται ή αντικαθιστούνται από το Syncthing μετακινούνται σε έναν φάκελο .stversions με χρονοσφραγίδα.",
+    "Files are moved to date stamped versions in a .stversions directory when replaced or deleted by Syncthing.": "Τα αρχεία που σβήνονται ή αντικαθίστανται από το Syncthing μετακινούνται στον κατάλογο .stversions με χρονοσήμανση.",
    "Files are moved to date stamped versions in a .stversions folder when replaced or deleted by Syncthing.": "Τα αρχεία που σβήνονται ή αντικαθιστούνται από το Syncthing μετακινούνται σε έναν φάκελο .stversions με χρονοσφραγίδα.",
    "Files are protected from changes made on other devices, but changes made on this device will be sent to the rest of the cluster.": "Τα αρχεία προστατεύονται από αλλαγές που γίνονται σε άλλες συσκευές, αλλά όποιες αλλαγές γίνουν σε αυτή τη συσκευή θα αποσταλούν σε όλη τη συστάδα συσκευών.",
    "Folder": "Φάκελος",
@@ -77,8 +93,11 @@
    "GUI": "Γραφικό περιβάλλον",
    "GUI Authentication Password": "Κωδικός για την πρόσβαση στη διεπαφή",
    "GUI Authentication User": "Χρηστώνυμο για την πρόσβαση στη διεπαφή",
+    "GUI Listen Address": "Διεύθυνση ακρόασης γραφικού περιβάλλοντος (GUI)",
    "GUI Listen Addresses": "Διευθύνσεις από τις οποίες θα είναι προσβάσιμη η διεπαφή",
+    "GUI Theme": "Θέμα GUI",
    "Generate": "Δημιουργία",
+    "Global Changes": "Συνολικές αλλαγές",
    "Global Discovery": "Καθολική ανεύρεση",
    "Global Discovery Servers": "Διακομιστές καθολικής ανεύρεσης κόμβων",
    "Global State": "Καθολική κατάσταση",
@@ -88,7 +107,8 @@
    "Ignore Patterns": "Πρότυπο για αγνόηση",
    "Ignore Permissions": "Αγνόησε τα δικαιώματα",
    "Incoming Rate Limit (KiB/s)": "Περιορισμός ταχύτητας λήψης (KiB/s)",
-    "Incorrect configuration may damage your folder contents and render Syncthing inoperable.": "Με μια εσφαλμένη ρύθμιση μπορεί να προκληθεί ζημιά στα περιεχόμενα των φακέλων και το Syncthing ενδέχεται να σταματήσει να λειτουργεί.",
+    "Incorrect configuration may damage your folder contents and render Syncthing inoperable.": "Με μια εσφαλμένη ρύθμιση μπορεί να προκληθεί ζημιά στα περιεχόμενα των φακέλων και το Syncthing να σταματήσει να λειτουργεί.",
+    "Introduced By": "Προτάθηκε από",
    "Introducer": "Βασικός κόμβος",
    "Inversion of the given condition (i.e. do not exclude)": "Αντιστροφή της δοσμένης συνθήκης (π.χ. να μην εξαιρείς) ",
    "Keep Versions": "Διατήρηση εκδόσεων",
@@ -98,6 +118,7 @@
    "Last seen": "Τελευταία φορά συνδεδεμένος",
    "Later": "Αργότερα",
    "Latest Change": "Τελευταία αλλαγή",
+    "Learn more": "Μάθετε περισσότερα",
    "Listeners": "Ακροατές",
    "Local Discovery": "Τοπική ανεύρεση",
    "Local State": "Τοπική κατάσταση",
@@ -115,6 +136,7 @@
    "Newest First": "Το νεότερο πρώτα",
    "No": "Όχι",
    "No File Versioning": "Να μην τηρούνται εκδόσεις",
+    "No upgrades": "Απενεργοποιημένες",
    "Normal": "Κανονικός",
    "Notice": "Σημείωση",
    "OK": "OK",
@@ -126,13 +148,18 @@
    "Out of Sync Items": "Μη συγχρονισμένα αντικείμενα",
    "Outgoing Rate Limit (KiB/s)": "Περιορισμός ταχύτητας αποστολής (KiB/s)",
    "Override Changes": "Να αντικατασταθούν οι αλλαγές",
+    "Path": "Μονοπάτι",
    "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Μονοπάτι του φακέλου σε αυτόν τον υπολογιστή. Αν δεν υπάρχει θα δημιουργηθεί. Η περισπωμένη (~) μπορεί να μπει σαν συντόμευση για το",
+    "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).": "Ο κατάλογος στον οποίο θα αποθηκεύονται οι εκδόσεις των αρχείων (αν δεν οριστεί, θα αποθηκεύονται στον υποκατάλογο .stversions)",
    "Path where versions should be stored (leave empty for the default .stversions folder in the folder).": "Ο φάκελος στον οποίο θα αποθηκεύονται οι εκδόσεις των αρχείων (αν δεν οριστεί θα αποθηκεύονται στον υποφάκελο .stversions)",
    "Pause": "Παύση",
+    "Pause All": "Παύση όλων",
    "Paused": "Σε παύση",
    "Please consult the release notes before performing a major upgrade.": "Παρακαλούμε, πριν από την εκτέλεση μιας σημαντικής αναβάθμισης, να συμβουλευτείς το σημείωμα που τη συνοδεύει.  ",
    "Please set a GUI Authentication User and Password in the Settings dialog.": "Παρακαλώ όρισε στις ρυθμίσεις έναν χρήστη και έναν κωδικό πρόσβασης για τη διεπαφή.",
    "Please wait": "Παρακαλώ περιμένετε",
+    "Prefix indicating that the file can be deleted if preventing directory removal": "Πρόθεμα που δείχνει ότι το αρχείο θα μπορεί να διαγραφεί αν εμποδίζει τη διαγραφή καταλόγου",
+    "Prefix indicating that the pattern should be matched without case sensitivity": "Πρόθεμα που δείχνει ότι αντιστοίχιση του προτύπου θα γίνεται χωρίς διάκριση πεζών και κεφαλαίων χαρακτήρων",
    "Preview": "Προεπισκόπηση",
    "Preview Usage Report": "Προεπισκόπηση αναφοράς χρήσης",
    "Quick guide to supported patterns": "Σύντομη βοήθεια σχετικά με τα πρότυπα αναζήτησης που υποστηρίζονται",
@@ -140,6 +167,7 @@
    "Random": "Τυχαία",
    "Reduced by ignore patterns": "Περιορισμένα λόγω προτύπων αγνόησης",
    "Release Notes": "Σημείωμα έκδοσης",
+    "Release candidates contain the latest features and fixes. They are similar to the traditional bi-weekly Syncthing releases.": "Οι υποψήφιες εκδόσεις περιέχουν τις νεότερες λειτουργίες και επιδιορθώσεις σφαλμάτων, όπως και οι παραδοσιακές δισεβδομαδιαίες εκδόσεις του Syncthing.",
    "Remote Devices": "Απομακρυσμένες συσκευές",
    "Remove": "Αφαίρεση",
    "Required identifier for the folder. Must be the same on all cluster devices.": "Απαραίτητο αναγνωριστικό για τον φάκελο. Πρέπει να είναι το ίδιο σε όλες τις συσκευές με τις οποίες διαμοιράζεται ο φάκελος αυτός.",
@@ -150,6 +178,7 @@
    "Restart Needed": "Απαιτείται επανεκκίνηση",
    "Restarting": "Επανεκκίνηση",
    "Resume": "Συνέχεια",
+    "Resume All": "Συνέχιση όλων",
    "Reused": "Χρησιμοποιήθηκε ξανά",
    "Save": "Αποθήκευση",
    "Scan Time Remaining": "Εναπομείναντας χρόνος για τον έλεγχο ",
@@ -175,6 +204,9 @@
    "Single level wildcard (matches within a directory only)": "Τελεστής μπαλαντέρ (*) για ένα επίπεδο (χρησιμοποιείται για έναν φάκελο μόνο)",
    "Smallest First": "Το μικρότερο πρώτα",
    "Source Code": "Πηγαίος κώδικας",
+    "Stable releases and release candidates": "Σταθερές εκδόσεις και υποψήφιες εκδόσεις.",
+    "Stable releases are delayed by about two weeks. During this time they go through testing as release candidates.": "Οι σταθερές εκδόσεις βγαίνουν με καθυστέρηση περίπου δύο εβδομάδων. Σε αυτό το διάστημα δοκιμάζονται ως υποψήφιες εκδόσεις.",
+    "Stable releases only": "Μόνο σταθερές εκδόσεις",
    "Staggered File Versioning": "Να τηρούνται κλιμακούμενες εκδόσεις",
    "Start Browser": "Εκκίνηση προγράμματος περιήγησης",
    "Statistics": "Στατιστικά",
@@ -205,7 +237,7 @@
    "The maximum time to keep a version (in days, set to 0 to keep versions forever).": "Η μέγιστη ηλικία παλιότερων εκδόσεων (σε ημέρες, αν δώσεις 0 οι παλιότερες εκδόσεις θα διατηρούνται για πάντα).",
    "The minimum free disk space percentage must be a non-negative number between 0 and 100 (inclusive).": "Το ποσοστό του ελάχιστου διαθέσιμου αποθηκευτικόυ χώρου πρέπει να είναι έναν μη-αρνητικός αριθμός μεταξύ του 0 και του 100 (συμπεριλαμβανομένων)",
    "The number of days must be a number and cannot be blank.": "Ο αριθμός ημερών πρέπει να είναι αριθμός και σίγουρα όχι κενό.",
-    "The number of days to keep files in the trash can. Zero means forever.": "Ο αριθμός ημερών που θα διατηρούντα τα αρχεία στον κάδο. Μηδέν σημαίνει διατήρηση για πάντα.",
+    "The number of days to keep files in the trash can. Zero means forever.": "Ο αριθμός ημερών που θα διατηρούνται τα αρχεία στον κάδο. Μηδέν σημαίνει διατήρηση για πάντα.",
    "The number of old versions to keep, per file.": "Πόσες παλιότερες εκδόσεις θα διατηρούνται, ανά αρχείο.",
    "The number of versions must be a number and cannot be blank.": "Ο αριθμός εκδόσεων πρέπει να είναι αριθμός και σίγουρα όχι κενό.",
    "The path cannot be blank.": "Το μονοπάτι δεν μπορεί να είναι κενό.",
@@ -215,7 +247,10 @@
    "This Device": "Αυτή η συσκευή",
    "This can easily give hackers access to read and change any files on your computer.": "Αυτό μπορεί εύκολα να δώσει πρόσβαση ανάγνωσης και επεξεργασίας αρχείων του υπολογιστή σας σε χάκερς.",
    "This is a major version upgrade.": "Αυτή είναι μια σημαντική αναβάθμιση.",
+    "This setting controls the free space required on the home (i.e., index database) disk.": "Αυτή η επιλογή καθορίζει τον ελεύθερο χώρο που θα παραμένει ελεύθερος στον δίσκο όπου βρίσκεται ο κατάλογος της εφαρμογής (και συνεπώς η βάση δεδομένων ευρετηρίων).",
+    "Time": "Χρόνος",
    "Trash Can File Versioning": "Τήρηση εκδόσεων κάδου ανακύκλωσης",
+    "Type": "Τύπος",
    "Unknown": "Άγνωστο",
    "Unshared": "Δε μοιράζεται",
    "Unused": "Δε χρησιμοποιείται",
@@ -226,14 +261,21 @@
    "Upgrading": "Αναβάθμιση",
    "Upload Rate": "Ταχύτητα ανεβάσματος",
    "Uptime": "Χρόνος απρόσκοπτης λειτουργίας",
+    "Usage reporting is always enabled for candidate releases.": "Η αποστολή αναφορών χρήσης είναι πάντα ενεργοποιημένη στις υποψήφιες εκδόσεις.",
    "Use HTTPS for GUI": "Χρήση HTTPS για τη διεπαφή",
    "Version": "Έκδοση",
    "Versions Path": "Φάκελος τήρησης εκδόσεων",
    "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "Οι παλιές εκδόσεις θα σβήνονται αυτόματα όταν ξεπεράσουν τη μέγιστη ηλικία ή όταν ξεπεραστεί ο μέγιστος αριθμός αρχείων ανά περίοδο.",
+    "Warning, this path is a parent directory of an existing folder \"{%otherFolder%}\".": "Προσοχή, αυτό το μονοπάτι είναι γονικός φάκελος ενός υπάρχοντος φακέλου \"{{otherFolder}}\".",
+    "Warning, this path is a parent directory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Προσοχή, αυτό το μονοπάτι είναι γονικός φάκελος ενός υπάρχοντος φακέλου \"{{otherFolderLabel}}\" ({{otherFolder}}).",
    "Warning, this path is a subdirectory of an existing folder \"{%otherFolder%}\".": "Προσοχή, αυτό το μονοπάτι είναι υποφάκελος του υπάρχοντος φακέλου \"{{otherFolder}}\".",
+    "Warning, this path is a subdirectory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Προσοχή, αυτό το μονοπάτι είναι υποφάκελος ενός υπάρχοντος φακέλου \"{{otherFolderLabel}}\" ({{otherFolder}}).",
    "When adding a new device, keep in mind that this device must be added on the other side too.": "Θυμήσου πως όταν προσθέτεις μια νέα συσκευή, ετούτη η συσκευή θα πρέπει να προστεθεί και στην άλλη πλευρά.",
    "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Όταν προσθέτεις έναν νέο φάκελο, θυμήσου πως η ταυτότητα ενός φακέλου χρησιμοποιείται για να να συσχετίσει φακέλους μεταξύ συσκευών. Η ταυτότητα του φακέλου θα πρέπει να είναι η ίδια σε όλες τις συσκευές και έχουν σημασία τα πεζά ή κεφαλαία γράμματα.",
    "Yes": "Ναι",
+    "You can also select one of these nearby devices:": "Μπορείτε επίσης να επιλέξετε μια από αυτές τις κοντινές συσκευές:",
+    "You can change your choice at any time in the Settings dialog.": "Μπορείτε να αλλάξετε τη ρύθμιση αυτή ανά πάσα στιγμή στο παράθυρο «Ρυθμίσεις».",
+    "You can read more about the two release channels at the link below.": "Μπορείτε να διαβάσετε περισσότερα για τα δύο κανάλια εκδόσεων στον παρακάτω σύνδεσμο.",
    "You must keep at least one version.": "Πρέπει να τηρήσεις τουλάχιστον μια έκδοση.",
    "days": "Μέρες",
    "directories": "κατάλογοι",
--- a/gui/default/assets/lang/lang-en-GB.json
+++ b/gui/default/assets/lang/lang-en-GB.json
@@ -4,11 +4,13 @@
    "A new major version may not be compatible with previous versions.": "A new major version may not be compatible with previous versions.",
    "API Key": "API Key",
    "About": "About",
+    "Action": "Action",
    "Actions": "Actions",
    "Add": "Add",
    "Add Device": "Add Device",
    "Add Folder": "Add Folder",
    "Add Remote Device": "Add Remote Device",
+    "Add devices from the introducer to our device list, for mutually shared folders.": "Add devices from the introducer to our device list, for mutually shared folders.",
    "Add new folder?": "Add new folder?",
    "Address": "Address",
    "Addresses": "Addresses",
@@ -17,16 +19,20 @@
    "Advanced settings": "Advanced settings",
    "All Data": "All Data",
    "Allow Anonymous Usage Reporting?": "Allow Anonymous Usage Reporting?",
+    "Allowed Networks": "Allowed Networks",
    "Alphabetic": "Alphabetic",
+    "An external command handles the versioning. It has to remove the file from the shared folder.": "An external command handles the versioning. It has to remove the file from the shared folder.",
    "An external command handles the versioning. It has to remove the file from the synced folder.": "An external command handles the versioning. It has to remove the file from the synced folder.",
    "Anonymous Usage Reporting": "Anonymous Usage Reporting",
    "Any devices configured on an introducer device will be added to this device as well.": "Any devices configured on an introducer device will be added to this device as well.",
+    "Automatic upgrade now offers the choice between stable releases and release candidates.": "Automatic upgrade now offers the choice between stable releases and release candidates.",
    "Automatic upgrades": "Automatic upgrades",
    "Be careful!": "Be careful!",
    "Bugs": "Bugs",
    "CPU Utilization": "CPU Utilisation",
    "Changelog": "Changelog",
    "Clean out after": "Clean out after",
+    "Click to see discovery failures": "Click to see discovery failures",
    "Close": "Close",
    "Command": "Command",
    "Comment, when used at the start of a line": "Comment, when used at the start of a line",
@@ -37,8 +43,11 @@
    "Copied from elsewhere": "Copied from elsewhere",
    "Copied from original": "Copied from original",
    "Copyright © 2014-2016 the following Contributors:": "Copyright © 2014-2016 the following Contributors:",
+    "Copyright © 2014-2017 the following Contributors:": "Copyright © 2014-2017 the following Contributors:",
+    "Creating ignore patterns, overwriting an existing file at {%path%}.": "Creating ignore patterns, overwriting an existing file at {{path}}.",
    "Danger!": "Danger!",
    "Deleted": "Deleted",
+    "Device": "Device",
    "Device \"{%name%}\" ({%device%} at {%address%}) wants to connect. Add new device?": "Device \"{{name}}\" ({{device}} at {{address}}) wants to connect. Add new device?",
    "Device ID": "Device ID",
    "Device Identification": "Device Identification",
@@ -47,6 +56,7 @@
    "Disconnected": "Disconnected",
    "Discovered": "Discovered",
    "Discovery": "Discovery",
+    "Discovery Failures": "Discovery Failures",
    "Documentation": "Documentation",
    "Download Rate": "Download Rate",
    "Downloaded": "Downloaded",
@@ -55,17 +65,23 @@
    "Edit Device": "Edit Device",
    "Edit Folder": "Edit Folder",
    "Editing": "Editing",
+    "Editing {%path%}.": "Editing {{path}}.",
    "Enable NAT traversal": "Enable NAT traversal",
    "Enable Relaying": "Enable Relaying",
+    "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.",
+    "Enter a non-privileged port number (1024 - 65535).": "Enter a non-privileged port number (1024 - 65535).",
    "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.",
    "Enter ignore patterns, one per line.": "Enter ignore patterns, one per line.",
    "Error": "Error",
    "External File Versioning": "External File Versioning",
    "Failed Items": "Failed Items",
+    "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.",
    "File Pull Order": "File Pull Order",
    "File Versioning": "File Versioning",
    "File permission bits are ignored when looking for changes. Use on FAT file systems.": "File permission bits are ignored when looking for changes. Use on FAT file systems.",
+    "Files are moved to .stversions directory when replaced or deleted by Syncthing.": "Files are moved to .stversions directory when replaced or deleted by Syncthing.",
    "Files are moved to .stversions folder when replaced or deleted by Syncthing.": "Files are moved to .stversions folder when replaced or deleted by Syncthing.",
+    "Files are moved to date stamped versions in a .stversions directory when replaced or deleted by Syncthing.": "Files are moved to date stamped versions in a .stversions directory when replaced or deleted by Syncthing.",
    "Files are moved to date stamped versions in a .stversions folder when replaced or deleted by Syncthing.": "Files are moved to date stamped versions in a .stversions folder when replaced or deleted by Syncthing.",
    "Files are protected from changes made on other devices, but changes made on this device will be sent to the rest of the cluster.": "Files are protected from changes made on other devices, but changes made on this device will be sent to the rest of the cluster.",
    "Folder": "Folder",
@@ -77,8 +93,11 @@
    "GUI": "GUI",
    "GUI Authentication Password": "GUI Authentication Password",
    "GUI Authentication User": "GUI Authentication User",
+    "GUI Listen Address": "GUI Listen Address",
    "GUI Listen Addresses": "GUI Listen Addresses",
+    "GUI Theme": "GUI Theme",
    "Generate": "Generate",
+    "Global Changes": "Global Changes",
    "Global Discovery": "Global Discovery",
    "Global Discovery Servers": "Global Discovery Servers",
    "Global State": "Global State",
@@ -89,6 +108,7 @@
    "Ignore Permissions": "Ignore Permissions",
    "Incoming Rate Limit (KiB/s)": "Incoming Rate Limit (KiB/s)",
    "Incorrect configuration may damage your folder contents and render Syncthing inoperable.": "Incorrect configuration may damage your folder contents and render Syncthing inoperable.",
+    "Introduced By": "Introduced By",
    "Introducer": "Introducer",
    "Inversion of the given condition (i.e. do not exclude)": "Inversion of the given condition (i.e. do not exclude)",
    "Keep Versions": "Keep Versions",
@@ -98,6 +118,7 @@
    "Last seen": "Last seen",
    "Later": "Later",
    "Latest Change": "Latest Change",
+    "Learn more": "Learn more",
    "Listeners": "Listeners",
    "Local Discovery": "Local Discovery",
    "Local State": "Local State",
@@ -115,6 +136,7 @@
    "Newest First": "Newest First",
    "No": "No",
    "No File Versioning": "No File Versioning",
+    "No upgrades": "No upgrades",
    "Normal": "Normal",
    "Notice": "Notice",
    "OK": "OK",
@@ -126,13 +148,18 @@
    "Out of Sync Items": "Out of Sync Items",
    "Outgoing Rate Limit (KiB/s)": "Outgoing Rate Limit (KiB/s)",
    "Override Changes": "Override Changes",
+    "Path": "Path",
    "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for",
+    "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).": "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).",
    "Path where versions should be stored (leave empty for the default .stversions folder in the folder).": "Path where versions should be stored (leave empty for the default .stversions folder in the folder).",
    "Pause": "Pause",
+    "Pause All": "Pause All",
    "Paused": "Paused",
    "Please consult the release notes before performing a major upgrade.": "Please consult the release notes before performing a major upgrade.",
    "Please set a GUI Authentication User and Password in the Settings dialog.": "Please set a GUI Authentication User and Password in the Settings dialogue.",
    "Please wait": "Please wait",
+    "Prefix indicating that the file can be deleted if preventing directory removal": "Prefix indicating that the file can be deleted if preventing directory removal",
+    "Prefix indicating that the pattern should be matched without case sensitivity": "Prefix indicating that the pattern should be matched without case sensitivity",
    "Preview": "Preview",
    "Preview Usage Report": "Preview Usage Report",
    "Quick guide to supported patterns": "Quick guide to supported patterns",
@@ -140,6 +167,7 @@
    "Random": "Random",
    "Reduced by ignore patterns": "Reduced by ignore patterns",
    "Release Notes": "Release Notes",
+    "Release candidates contain the latest features and fixes. They are similar to the traditional bi-weekly Syncthing releases.": "Release candidates contain the latest features and fixes. They are similar to the traditional fortnightly Syncthing releases.",
    "Remote Devices": "Remote Devices",
    "Remove": "Remove",
    "Required identifier for the folder. Must be the same on all cluster devices.": "Required identifier for the folder. Must be the same on all cluster devices.",
@@ -150,6 +178,7 @@
    "Restart Needed": "Restart Needed",
    "Restarting": "Restarting",
    "Resume": "Resume",
+    "Resume All": "Resume All",
    "Reused": "Reused",
    "Save": "Save",
    "Scan Time Remaining": "Scan Time Remaining",
@@ -175,6 +204,9 @@
    "Single level wildcard (matches within a directory only)": "Single level wildcard (matches within a directory only)",
    "Smallest First": "Smallest First",
    "Source Code": "Source Code",
+    "Stable releases and release candidates": "Stable releases and release candidates",
+    "Stable releases are delayed by about two weeks. During this time they go through testing as release candidates.": "Stable releases are delayed by about two weeks. During this time they go through testing as release candidates.",
+    "Stable releases only": "Stable releases only",
    "Staggered File Versioning": "Staggered File Versioning",
    "Start Browser": "Start Browser",
    "Statistics": "Statistics",
@@ -215,7 +247,10 @@
    "This Device": "This Device",
    "This can easily give hackers access to read and change any files on your computer.": "This can easily give hackers access to read and change any files on your computer.",
    "This is a major version upgrade.": "This is a major version upgrade.",
+    "This setting controls the free space required on the home (i.e., index database) disk.": "This setting controls the free space required on the home (i.e., index database) disk.",
+    "Time": "Time",
    "Trash Can File Versioning": "Rubbish Bin File Versioning",
+    "Type": "Type",
    "Unknown": "Unknown",
    "Unshared": "Unshared",
    "Unused": "Unused",
@@ -226,14 +261,21 @@
    "Upgrading": "Upgrading",
    "Upload Rate": "Upload Rate",
    "Uptime": "Uptime",
+    "Usage reporting is always enabled for candidate releases.": "Usage reporting is always enabled for candidate releases.",
    "Use HTTPS for GUI": "Use HTTPS for GUI",
    "Version": "Version",
    "Versions Path": "Versions Path",
    "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.",
+    "Warning, this path is a parent directory of an existing folder \"{%otherFolder%}\".": "Warning, this path is a parent directory of an existing folder \"{{otherFolder}}\".",
+    "Warning, this path is a parent directory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Warning, this path is a parent directory of an existing folder \"{{otherFolderLabel}}\" ({{otherFolder}}).",
    "Warning, this path is a subdirectory of an existing folder \"{%otherFolder%}\".": "Warning, this path is a subdirectory of an existing folder \"{{otherFolder}}\".",
+    "Warning, this path is a subdirectory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Warning, this path is a subdirectory of an existing folder \"{{otherFolderLabel}}\" ({{otherFolder}}).",
    "When adding a new device, keep in mind that this device must be added on the other side too.": "When adding a new device, keep in mind that this device must be added on the other side too.",
    "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.",
    "Yes": "Yes",
+    "You can also select one of these nearby devices:": "You can also select one of these nearby devices:",
+    "You can change your choice at any time in the Settings dialog.": "You can change your choice at any time in the Settings dialogue.",
+    "You can read more about the two release channels at the link below.": "You can read more about the two release channels at the link below.",
    "You must keep at least one version.": "You must keep at least one version.",
    "days": "days",
    "directories": "directories",
--- a/gui/default/assets/lang/lang-en.json
+++ b/gui/default/assets/lang/lang-en.json
@@ -4,11 +4,13 @@
   "A new major version may not be compatible with previous versions.": "A new major version may not be compatible with previous versions.",
   "API Key": "API Key",
   "About": "About",
+   "Action": "Action",
   "Actions": "Actions",
   "Add": "Add",
   "Add Device": "Add Device",
   "Add Folder": "Add Folder",
   "Add Remote Device": "Add Remote Device",
+   "Add devices from the introducer to our device list, for mutually shared folders.": "Add devices from the introducer to our device list, for mutually shared folders.",
   "Add new folder?": "Add new folder?",
   "Address": "Address",
   "Addresses": "Addresses",
@@ -17,16 +19,20 @@
   "Advanced settings": "Advanced settings",
   "All Data": "All Data",
   "Allow Anonymous Usage Reporting?": "Allow Anonymous Usage Reporting?",
+   "Allowed Networks": "Allowed Networks",
   "Alphabetic": "Alphabetic",
+   "An external command handles the versioning. It has to remove the file from the shared folder.": "An external command handles the versioning. It has to remove the file from the shared folder.",
   "An external command handles the versioning. It has to remove the file from the synced folder.": "An external command handles the versioning. It has to remove the file from the synced folder.",
   "Anonymous Usage Reporting": "Anonymous Usage Reporting",
   "Any devices configured on an introducer device will be added to this device as well.": "Any devices configured on an introducer device will be added to this device as well.",
+   "Automatic upgrade now offers the choice between stable releases and release candidates.": "Automatic upgrade now offers the choice between stable releases and release candidates.",
   "Automatic upgrades": "Automatic upgrades",
   "Be careful!": "Be careful!",
   "Bugs": "Bugs",
   "CPU Utilization": "CPU Utilization",
   "Changelog": "Changelog",
   "Clean out after": "Clean out after",
+   "Click to see discovery failures": "Click to see discovery failures",
   "Close": "Close",
   "Command": "Command",
   "Comment, when used at the start of a line": "Comment, when used at the start of a line",
@@ -37,8 +43,11 @@
   "Copied from elsewhere": "Copied from elsewhere",
   "Copied from original": "Copied from original",
   "Copyright © 2014-2016 the following Contributors:": "Copyright © 2014-2016 the following Contributors:",
+   "Copyright © 2014-2017 the following Contributors:": "Copyright © 2014-2017 the following Contributors:",
+   "Creating ignore patterns, overwriting an existing file at {%path%}.": "Creating ignore patterns, overwriting an existing file at {{path}}.",
   "Danger!": "Danger!",
   "Deleted": "Deleted",
+   "Device": "Device",
   "Device \"{%name%}\" ({%device%} at {%address%}) wants to connect. Add new device?": "Device \"{{name}}\" ({{device}} at {{address}}) wants to connect. Add new device?",
   "Device ID": "Device ID",
   "Device Identification": "Device Identification",
@@ -47,6 +56,7 @@
   "Disconnected": "Disconnected",
   "Discovered": "Discovered",
   "Discovery": "Discovery",
+   "Discovery Failures": "Discovery Failures",
   "Documentation": "Documentation",
   "Download Rate": "Download Rate",
   "Downloaded": "Downloaded",
@@ -55,17 +65,23 @@
   "Edit Device": "Edit Device",
   "Edit Folder": "Edit Folder",
   "Editing": "Editing",
+   "Editing {%path%}.": "Editing {{path}}.",
   "Enable NAT traversal": "Enable NAT traversal",
   "Enable Relaying": "Enable Relaying",
+   "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.",
+   "Enter a non-privileged port number (1024 - 65535).": "Enter a non-privileged port number (1024 - 65535).",
   "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.",
   "Enter ignore patterns, one per line.": "Enter ignore patterns, one per line.",
   "Error": "Error",
   "External File Versioning": "External File Versioning",
   "Failed Items": "Failed Items",
+   "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.",
   "File Pull Order": "File Pull Order",
   "File Versioning": "File Versioning",
   "File permission bits are ignored when looking for changes. Use on FAT file systems.": "File permission bits are ignored when looking for changes. Use on FAT file systems.",
+   "Files are moved to .stversions directory when replaced or deleted by Syncthing.": "Files are moved to .stversions directory when replaced or deleted by Syncthing.",
   "Files are moved to .stversions folder when replaced or deleted by Syncthing.": "Files are moved to .stversions folder when replaced or deleted by Syncthing.",
+   "Files are moved to date stamped versions in a .stversions directory when replaced or deleted by Syncthing.": "Files are moved to date stamped versions in a .stversions directory when replaced or deleted by Syncthing.",
   "Files are moved to date stamped versions in a .stversions folder when replaced or deleted by Syncthing.": "Files are moved to date stamped versions in a .stversions folder when replaced or deleted by Syncthing.",
   "Files are protected from changes made on other devices, but changes made on this device will be sent to the rest of the cluster.": "Files are protected from changes made on other devices, but changes made on this device will be sent to the rest of the cluster.",
   "Folder": "Folder",
@@ -77,8 +93,11 @@
   "GUI": "GUI",
   "GUI Authentication Password": "GUI Authentication Password",
   "GUI Authentication User": "GUI Authentication User",
+   "GUI Listen Address": "GUI Listen Address",
   "GUI Listen Addresses": "GUI Listen Addresses",
+   "GUI Theme": "GUI Theme",
   "Generate": "Generate",
+   "Global Changes": "Global Changes",
   "Global Discovery": "Global Discovery",
   "Global Discovery Servers": "Global Discovery Servers",
   "Global State": "Global State",
@@ -89,6 +108,7 @@
   "Ignore Permissions": "Ignore Permissions",
   "Incoming Rate Limit (KiB/s)": "Incoming Rate Limit (KiB/s)",
   "Incorrect configuration may damage your folder contents and render Syncthing inoperable.": "Incorrect configuration may damage your folder contents and render Syncthing inoperable.",
+   "Introduced By": "Introduced By",
   "Introducer": "Introducer",
   "Inversion of the given condition (i.e. do not exclude)": "Inversion of the given condition (i.e. do not exclude)",
   "Keep Versions": "Keep Versions",
@@ -98,6 +118,7 @@
   "Last seen": "Last seen",
   "Later": "Later",
   "Latest Change": "Latest Change",
+   "Learn more": "Learn more",
   "Listeners": "Listeners",
   "Local Discovery": "Local Discovery",
   "Local State": "Local State",
@@ -115,6 +136,7 @@
   "Newest First": "Newest First",
   "No": "No",
   "No File Versioning": "No File Versioning",
+   "No upgrades": "No upgrades",
   "Normal": "Normal",
   "Notice": "Notice",
   "OK": "OK",
@@ -126,13 +148,18 @@
   "Out of Sync Items": "Out of Sync Items",
   "Outgoing Rate Limit (KiB/s)": "Outgoing Rate Limit (KiB/s)",
   "Override Changes": "Override Changes",
+   "Path": "Path",
   "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for",
+   "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).": "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).",
   "Path where versions should be stored (leave empty for the default .stversions folder in the folder).": "Path where versions should be stored (leave empty for the default .stversions folder in the folder).",
   "Pause": "Pause",
+   "Pause All": "Pause All",
   "Paused": "Paused",
   "Please consult the release notes before performing a major upgrade.": "Please consult the release notes before performing a major upgrade.",
   "Please set a GUI Authentication User and Password in the Settings dialog.": "Please set a GUI Authentication User and Password in the Settings dialog.",
   "Please wait": "Please wait",
+   "Prefix indicating that the file can be deleted if preventing directory removal": "Prefix indicating that the file can be deleted if preventing directory removal",
+   "Prefix indicating that the pattern should be matched without case sensitivity": "Prefix indicating that the pattern should be matched without case sensitivity",
   "Preview": "Preview",
   "Preview Usage Report": "Preview Usage Report",
   "Quick guide to supported patterns": "Quick guide to supported patterns",
@@ -140,6 +167,7 @@
   "Random": "Random",
   "Reduced by ignore patterns": "Reduced by ignore patterns",
   "Release Notes": "Release Notes",
+   "Release candidates contain the latest features and fixes. They are similar to the traditional bi-weekly Syncthing releases.": "Release candidates contain the latest features and fixes. They are similar to the traditional bi-weekly Syncthing releases.",
   "Remote Devices": "Remote Devices",
   "Remove": "Remove",
   "Required identifier for the folder. Must be the same on all cluster devices.": "Required identifier for the folder. Must be the same on all cluster devices.",
@@ -150,6 +178,7 @@
   "Restart Needed": "Restart Needed",
   "Restarting": "Restarting",
   "Resume": "Resume",
+   "Resume All": "Resume All",
   "Reused": "Reused",
   "Save": "Save",
   "Scan Time Remaining": "Scan Time Remaining",
@@ -175,6 +204,9 @@
   "Single level wildcard (matches within a directory only)": "Single level wildcard (matches within a directory only)",
   "Smallest First": "Smallest First",
   "Source Code": "Source Code",
+   "Stable releases and release candidates": "Stable releases and release candidates",
+   "Stable releases are delayed by about two weeks. During this time they go through testing as release candidates.": "Stable releases are delayed by about two weeks. During this time they go through testing as release candidates.",
+   "Stable releases only": "Stable releases only",
   "Staggered File Versioning": "Staggered File Versioning",
   "Start Browser": "Start Browser",
   "Statistics": "Statistics",
@@ -215,7 +247,10 @@
   "This Device": "This Device",
   "This can easily give hackers access to read and change any files on your computer.": "This can easily give hackers access to read and change any files on your computer.",
   "This is a major version upgrade.": "This is a major version upgrade.",
+   "This setting controls the free space required on the home (i.e., index database) disk.": "This setting controls the free space required on the home (i.e., index database) disk.",
+   "Time": "Time",
   "Trash Can File Versioning": "Trash Can File Versioning",
+   "Type": "Type",
   "Unknown": "Unknown",
   "Unshared": "Unshared",
   "Unused": "Unused",
@@ -226,14 +261,21 @@
   "Upgrading": "Upgrading",
   "Upload Rate": "Upload Rate",
   "Uptime": "Uptime",
+   "Usage reporting is always enabled for candidate releases.": "Usage reporting is always enabled for candidate releases.",
   "Use HTTPS for GUI": "Use HTTPS for GUI",
   "Version": "Version",
   "Versions Path": "Versions Path",
   "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.",
+   "Warning, this path is a parent directory of an existing folder \"{%otherFolder%}\".": "Warning, this path is a parent directory of an existing folder \"{{otherFolder}}\".",
+   "Warning, this path is a parent directory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Warning, this path is a parent directory of an existing folder \"{{otherFolderLabel}}\" ({{otherFolder}}).",
   "Warning, this path is a subdirectory of an existing folder \"{%otherFolder%}\".": "Warning, this path is a subdirectory of an existing folder \"{{otherFolder}}\".",
+   "Warning, this path is a subdirectory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Warning, this path is a subdirectory of an existing folder \"{{otherFolderLabel}}\" ({{otherFolder}}).",
   "When adding a new device, keep in mind that this device must be added on the other side too.": "When adding a new device, keep in mind that this device must be added on the other side too.",
   "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.",
   "Yes": "Yes",
+   "You can also select one of these nearby devices:": "You can also select one of these nearby devices:",
+   "You can change your choice at any time in the Settings dialog.": "You can change your choice at any time in the Settings dialog.",
+   "You can read more about the two release channels at the link below.": "You can read more about the two release channels at the link below.",
   "You must keep at least one version.": "You must keep at least one version.",
   "days": "days",
   "directories": "directories",
--- a/gui/default/assets/lang/lang-eo.json
+++ b/gui/default/assets/lang/lang-eo.json
@@ -0,0 +1,287 @@
+{
+    "A device with that ID is already added.": "Aparato kies ID estis jam aldonita.",
+    "A negative number of days doesn't make sense.": "Negativa numero de tagoj sen senco.",
+    "A new major version may not be compatible with previous versions.": "Nova ĉefa versio eble ne kongruanta kun antaŭaj versioj.",
+    "API Key": "API Ŝlosilo",
+    "About": "Pri",
+    "Action": "Ago",
+    "Actions": "Agoj",
+    "Add": "Aldoni",
+    "Add Device": "Aldonu Aparaton",
+    "Add Folder": "Aldonu Dosierujon",
+    "Add Remote Device": "Aldonu Foran Aparaton",
+    "Add devices from the introducer to our device list, for mutually shared folders.": "Add devices from the introducer to our device list, for mutually shared folders.",
+    "Add new folder?": "Aldoni novan dosierujon?",
+    "Address": "Adreso",
+    "Addresses": "Adresoj",
+    "Advanced": "Altnivela",
+    "Advanced Configuration": "Altnivela Konfiguro",
+    "Advanced settings": "Altnivelaj agordoj",
+    "All Data": "Ĉiuj Datumoj",
+    "Allow Anonymous Usage Reporting?": "Permesi Anoniman Raporton de Uzado?",
+    "Allowed Networks": "Permesitaj Retoj",
+    "Alphabetic": "Alfabeta",
+    "An external command handles the versioning. It has to remove the file from the shared folder.": "Ekstera komando manipulas la version. Ĝi devas forigi la dosieron el la partigita dosierujo.",
+    "An external command handles the versioning. It has to remove the file from the synced folder.": "Ekstera komando manipulas la version. Ĝi devas forigi la dosieron el la sinkronigita dosierujo.",
+    "Anonymous Usage Reporting": "Anonima Raporto de Uzado",
+    "Any devices configured on an introducer device will be added to this device as well.": "Ajna aparatoj agorditaj sur enkondukanto aparato estos ankaŭ aldonita al ĉi tiu aparato.",
+    "Automatic upgrade now offers the choice between stable releases and release candidates.": "Aŭtomata ĝisdatigo nun proponas la elekton inter stabilaj eldonoj kaj kandidataj eldonoj.",
+    "Automatic upgrades": "Aŭtomataj ĝisdatigoj",
+    "Be careful!": "Atentu!",
+    "Bugs": "Bugoj",
+    "CPU Utilization": "Ĉefprocesoro Uzo",
+    "Changelog": "Ŝanĝoprotokolo",
+    "Clean out after": "Purigi poste",
+    "Click to see discovery failures": "Klaku por vidi malsukcesajn malkovrojn",
+    "Close": "Fermi",
+    "Command": "Komando",
+    "Comment, when used at the start of a line": "Komento, kiam uzita ĉe la komenco de lineo",
+    "Compression": "Densigo",
+    "Configured": "Agordita",
+    "Connection Error": "Eraro de Konekto",
+    "Connection Type": "Tipo de Konekto",
+    "Copied from elsewhere": "Kopiita el aliloke",
+    "Copied from original": "Kopiita el la originalo",
+    "Copyright © 2014-2016 the following Contributors:": "Kopirajto © 2014-2016 por la sekvantaj Kontribuantoj:",
+    "Copyright © 2014-2017 the following Contributors:": "Kopirajto © 2014-2017 por la sekvantaj Kontribuantoj:",
+    "Creating ignore patterns, overwriting an existing file at {%path%}.": "Kreante ignori skemojn,  anstataŭige ekzistantan dosieron ĉe {{path}}.",
+    "Danger!": "Danĝero!",
+    "Deleted": "Forigita",
+    "Device": "Aparato",
+    "Device \"{%name%}\" ({%device%} at {%address%}) wants to connect. Add new device?": "Aparato \"{{name}}\" ({{device}} ĉe {{address}}) volas konekti. Aldoni la novan aparaton?",
+    "Device ID": "Aparato ID",
+    "Device Identification": "Identigo de Aparato",
+    "Device Name": "Nomo de Aparato",
+    "Devices": "Aparatoj",
+    "Disconnected": "Malkonektita",
+    "Discovered": "Malkovrita",
+    "Discovery": "Malkovro",
+    "Discovery Failures": "Malkovritaj Fiaskoj",
+    "Documentation": "Dokumentado",
+    "Download Rate": "Elŝutado rapida",
+    "Downloaded": "Elŝutita",
+    "Downloading": "Elŝutado",
+    "Edit": "Redakti",
+    "Edit Device": "Redakti Aparaton",
+    "Edit Folder": "Redakti Dosierujon",
+    "Editing": "Redaktado",
+    "Editing {%path%}.": "Redaktado {{path}}.",
+    "Enable NAT traversal": "Ŝaltu trairan NAT",
+    "Enable Relaying": "Ŝaltu Relajsadon",
+    "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.",
+    "Enter a non-privileged port number (1024 - 65535).": "Enter a non-privileged port number (1024 - 65535).",
+    "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Enigi adresojn dividitajn per komoj (\"tcp://ip:port\", \"tcp://host:port\") aŭ \"dynamic\" por elfari aŭtomatan malkovradon de la adreso.",
+    "Enter ignore patterns, one per line.": "Entajpu ignori skemojn, unu po linio.",
+    "Error": "Eraro",
+    "External File Versioning": "Ekstera Versionado de Dosiero",
+    "Failed Items": "Malsukcesaj Eroj",
+    "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "Malsukceso por konekti al IPv6 serviloj atendante se ekzistas neniu IPv6 konektebleco.",
+    "File Pull Order": "Ordo por Tiri Dosieron",
+    "File Versioning": "Versionado de Dosieroj",
+    "File permission bits are ignored when looking for changes. Use on FAT file systems.": "Permesoj bitaj de dosieroj estas ignorita dum la serĉado por ŝanĝoj. Uzi en FAT dosiersistemoj.",
+    "Files are moved to .stversions directory when replaced or deleted by Syncthing.": "Dosieroj estas movigitaj al .stversiaj dosierujoj kiam anstataŭigitaj aŭ forigitaj en Syncthing.",
+    "Files are moved to .stversions folder when replaced or deleted by Syncthing.": "Dosieroj estas movigitaj al .stversions dosierujo kiam anstataŭigitaj aŭ forigitaj en Syncthing.",
+    "Files are moved to date stamped versions in a .stversions directory when replaced or deleted by Syncthing.": "Dosieroj estas movigitaj al date stampitaj versioj en .stversiaj dosierujo kiam ili estas anstataŭigitaj aŭ forigitaj en Syncthing.",
+    "Files are moved to date stamped versions in a .stversions folder when replaced or deleted by Syncthing.": "Dosieroj estas movigitaj al datostampitaj versioj en .stversions dosierujoj kiam ili estas anstataŭigitaj aŭ forigitaj en Syncthing.",
+    "Files are protected from changes made on other devices, but changes made on this device will be sent to the rest of the cluster.": "Dosieroj estas protektataj kontraŭ ŝanĝoj faritaj en aliaj aparatoj, sed ŝanĝoj faritaj en ĉi tiu aparato estos senditaj al cetera parto de la grupo.",
+    "Folder": "Dosierujo",
+    "Folder ID": "Dosieruja ID",
+    "Folder Label": "Dosieruja Etikedo",
+    "Folder Path": "Dosieruja Vojo",
+    "Folder Type": "Dosieruja Tipo",
+    "Folders": "Dosierujoj",
+    "GUI": "Grafika Interfaco",
+    "GUI Authentication Password": "Pasvorta Aŭtentigo en Grafika Interfaco",
+    "GUI Authentication User": "Uzanta Aŭtentigo en Grafika Interfaco",
+    "GUI Listen Address": "GUI Listen Address",
+    "GUI Listen Addresses": "Aŭskultado de Adresoj en Grafika Interfaco",
+    "GUI Theme": "Etoso de Grafika Interfaco",
+    "Generate": "Generi",
+    "Global Changes": "Kompletaj Ŝanĝoj",
+    "Global Discovery": "Kompleta Malkovro",
+    "Global Discovery Servers": "Kompleta Malkovrado de Serviloj",
+    "Global State": "Kompleta Stato",
+    "Help": "Helpo",
+    "Home page": "Hejma paĝo",
+    "Ignore": "Ignoru",
+    "Ignore Patterns": "Ignori Ŝablonojn",
+    "Ignore Permissions": "Ignori Permesojn",
+    "Incoming Rate Limit (KiB/s)": "Alvenanta Limo Rapideco (KiB/s)",
+    "Incorrect configuration may damage your folder contents and render Syncthing inoperable.": "Erara agordo povas difekti viajn dosierujajn enhavojn kaj senefikigi Syncthing-n.",
+    "Introduced By": "Enkondukita Per",
+    "Introducer": "Enkondukita",
+    "Inversion of the given condition (i.e. do not exclude)": "Inversigo de la donita kondiĉo (i.e. ne ekskludas)",
+    "Keep Versions": "Konservi Versiojn.",
+    "Largest First": "Plej Granda Unue",
+    "Last File Received": "Lasta Dosiero Ricevita",
+    "Last Scan": "Lasta Skano",
+    "Last seen": "Lasta vidita",
+    "Later": "Poste",
+    "Latest Change": "Lasta Ŝanĝo",
+    "Learn more": "Lerni pli",
+    "Listeners": "Aŭskultantoj",
+    "Local Discovery": "Loka Malkovro",
+    "Local State": "Loka Stato",
+    "Local State (Total)": "Loka Stato (Tuta)",
+    "Major Upgrade": "Ĉefa Ĝisdatigo",
+    "Master": "Ĉefa",
+    "Maximum Age": "Maksimuma Aĝo",
+    "Metadata Only": "Nur Metadatumoj",
+    "Minimum Free Disk Space": "Minimuma Libera Diskospaco",
+    "Move to top of queue": "Movi supren en la atendovico",
+    "Multi level wildcard (matches multiple directory levels)": "Multi nivelo ĵokero (egalas multoblajn dosierujaj niveloj)",
+    "Never": "Neniam",
+    "New Device": "Nova Aparato",
+    "New Folder": "Dova Dosierujo",
+    "Newest First": "Plejnova Unue",
+    "No": "Ne",
+    "No File Versioning": "Sen Dosiera Versionado",
+    "No upgrades": "Sen ĝisdatigoj",
+    "Normal": "Normala",
+    "Notice": "Avizo",
+    "OK": "Bone",
+    "Off": "For",
+    "Oldest First": "Malnova Unue",
+    "Optional descriptive label for the folder. Can be different on each device.": "Laŭvola priskriba etikedo por la dosierujo. Povas esti malsama en ĉiu aparato.",
+    "Options": "Opcioj",
+    "Out of Sync": "Elsinkronigita",
+    "Out of Sync Items": "Elsinkronigitaj Eroj",
+    "Outgoing Rate Limit (KiB/s)": "Limo de Eliranta Rapideco (KiB/s)",
+    "Override Changes": "Transpasi Ŝanĝojn",
+    "Path": "Vojo",
+    "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Vojo de la dosierujo en la loka komputilo. Kreiĝos se ne ekzistas. La tilda signo (~) povas esti uzata kiel mallongigilo por",
+    "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).": "Vojo kies versioj devus esti stokitaj (lasi malplena por la defaŭlta .stversiaj dosierujoj en la dividita dosierujo).",
+    "Path where versions should be stored (leave empty for the default .stversions folder in the folder).": "Vojo kies vesioj estas konservitaj (lasi malplena por la defaŭlta .stversiaj dosierujoj en la dosierujo).",
+    "Pause": "Paŭzu",
+    "Pause All": "Paŭzu Ĉion",
+    "Paused": "Paŭzita",
+    "Please consult the release notes before performing a major upgrade.": "Bonvolu konsulti la eldonitajn notojn antaŭ elfari ĉefan ĝisdatigon.",
+    "Please set a GUI Authentication User and Password in the Settings dialog.": "Bonvolu agordi GUI Authentication Uzanto kaj Pasvorto en la agordoj dialogo.",
+    "Please wait": "Bonvolu atendi",
+    "Prefix indicating that the file can be deleted if preventing directory removal": "Prefix indicating that the file can be deleted if preventing directory removal",
+    "Prefix indicating that the pattern should be matched without case sensitivity": "Prefix indicating that the pattern should be matched without case sensitivity",
+    "Preview": "Antaŭrigardo",
+    "Preview Usage Report": "Antaŭrigardo Uzada Raporto",
+    "Quick guide to supported patterns": "Rapida gvidisto al subtenata ŝablonoj",
+    "RAM Utilization": "RAM Utiligado",
+    "Random": "Hazarda",
+    "Reduced by ignore patterns": "Reduktita per ignorado de la ŝablonoj",
+    "Release Notes": "Eldonitaj Notoj",
+    "Release candidates contain the latest features and fixes. They are similar to the traditional bi-weekly Syncthing releases.": "Kandidataj eldonoj enhavas la lastajn trajtojn kaj korektojn. Ili estas similaj al la tradiciaj dusemajnaj Syncthing ĵetoj.",
+    "Remote Devices": "Foraj Aparatoj",
+    "Remove": "Forigu",
+    "Required identifier for the folder. Must be the same on all cluster devices.": "Nepra identigilo por la dosierujo. Devas esti la sama en ĉiuj aparatoj de la grupo.",
+    "Rescan": "Reskanu",
+    "Rescan All": "Reskanu Ĉion",
+    "Rescan Interval": "Reskana Intervalo",
+    "Restart": "Restartu",
+    "Restart Needed": "Restarto Bezonata",
+    "Restarting": "Restartado",
+    "Resume": "Daŭrigu",
+    "Resume All": "Daŭrigu Ĉion",
+    "Reused": "Reuzita",
+    "Save": "Konservu",
+    "Scan Time Remaining": "Skanada Restanta Tempo",
+    "Scanning": "Skanado",
+    "Select the devices to share this folder with.": "Elekti la aparatojn por komunigi ĉi tiun dosierujon.",
+    "Select the folders to share with this device.": "Elekti la dosierujojn por komunigi kun ĉi tiu aparato.",
+    "Send & Receive": "Sendi kaj Ricevi",
+    "Send Only": "Nur Sendi",
+    "Settings": "Agordoj",
+    "Share": "Komunigu",
+    "Share Folder": "Komunigu Dosierujon",
+    "Share Folders With Device": "Dosierujoj Komunigitaj Kun Aparato",
+    "Share With Devices": "Komunigu Kun Aparatoj",
+    "Share this folder?": "Komunigi ĉi tiun dosierujon?",
+    "Shared With": "Komunigita Kun",
+    "Show ID": "Montru ID",
+    "Show QR": "Montru QR",
+    "Shown instead of Device ID in the cluster status. Will be advertised to other devices as an optional default name.": "Montrita anstataŭ ID de Aparato en la statuso de la grupo. Estos anoncita al aliaj aparatoj kiel laŭvola defaŭlta nomo.",
+    "Shown instead of Device ID in the cluster status. Will be updated to the name the device advertises if left empty.": "Montri anstataŭ ID de Aparato en la statuso de la grupo. Estos ĝisdatigita al la nomo de la aparato sciigante se ĝi estas lasita malplena.",
+    "Shutdown": "Sistemfermu",
+    "Shutdown Complete": "Sistemfermu tute",
+    "Simple File Versioning": "Simpla Versionado de Dosieroj",
+    "Single level wildcard (matches within a directory only)": "Ununura nivelo ĵokero (egalas nur ene de dosierujo)",
+    "Smallest First": "Plej Malgranda Unue",
+    "Source Code": "Fontkodo",
+    "Stable releases and release candidates": "Stabilaj eldonoj kaj kandidataj eldonoj",
+    "Stable releases are delayed by about two weeks. During this time they go through testing as release candidates.": "Stabilaj eldonoj prokrastas je ĉirkaŭ du semjanoj. Dum tiu tempo ili estos testataj kiel kandidataj eldonoj.",
+    "Stable releases only": "Nur stabilaj eldonoj",
+    "Staggered File Versioning": "Gradigitaj Dosiera versionado",
+    "Start Browser": "Startu Retumilon",
+    "Statistics": "Statistikoj",
+    "Stopped": "Haltita",
+    "Support": "Subteno",
+    "Sync Protocol Listen Addresses": "Sync Protokolo de Aŭskultado de Adresoj",
+    "Syncing": "Elsinkronado",
+    "Syncthing has been shut down.": "Syncthing estis malŝaltita.",
+    "Syncthing includes the following software or portions thereof:": "Syncthing inkluzivas la jenajn programarojn aŭ porciojn ĝiajn:",
+    "Syncthing is restarting.": "Syncthing estas restartanta.",
+    "Syncthing is upgrading.": "Syncthing estas ĝisdatigita.",
+    "Syncthing seems to be down, or there is a problem with your Internet connection. Retrying…": "Syncthing ŝajnas nefunkcii, aŭ estas problemo kun via retkonekto. Reprovado...",
+    "Syncthing seems to be experiencing a problem processing your request. Please refresh the page or restart Syncthing if the problem persists.": "Syncthing ŝajnas renkonti problemon kun la traktado de via peto. Bonvolu refreŝigi la paĝon aŭ restarti Syncthing se la problemo daŭras.",
+    "The Syncthing admin interface is configured to allow remote access without a password.": "La administra interfaco de Syncthing estas agordita por permesi foran atingon sen pasvorto.",
+    "The aggregated statistics are publicly available at the URL below.": "La agregita statistikoj estas publike disponebla ĉe la URL malsupre.",
+    "The configuration has been saved but not activated. Syncthing must restart to activate the new configuration.": "La agordo estis registrita sed ne aktivigita. Syncthing devas restarti por aktivigi la novan agordon.",
+    "The device ID cannot be blank.": "La aparato ID ne povas esti malplena.",
+    "The device ID to enter here can be found in the \"Actions > Show ID\" dialog on the other device. Spaces and dashes are optional (ignored).": "La aparato ID por eniri ĉi tie estas trovebla per \"Agoj > Montru ID\" dialogo en la alia aparato. Interspacoj kaj streketoj estas opcio (ignorigita).",
+    "The encrypted usage report is sent daily. It is used to track common platforms, folder sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.": "La ĉifrita raporto de uzado estas sendata ĉiutage. Ĝi estas uzata por sekvi komunajn platformojn, dosierujajn grandojn kaj aplikaĵajn versiojn. Se la raporto datumaro ŝanĝis, vi estos avertata per ĉi tiu dialogo denove.",
+    "The entered device ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.": "La enigita aparato ID ne ŝajnas valida. Ĝi devas esti signoĉeno el 52 aŭ 56 karaktroj longa enhavanta leterojn kaj nombrojn, kun interspacoj kaj streketoj opciaj.",
+    "The first command line parameter is the folder path and the second parameter is the relative path in the folder.": "La unua komandlinia parametro estas la vojo de la dosierujo kaj la dua parametro estas la relativa vojo en la dosierujo.",
+    "The folder ID cannot be blank.": "La dosierujo ID ne povas esti malplena.",
+    "The folder ID must be unique.": "La dosierujo ID devas esti unika.",
+    "The folder path cannot be blank.": "La vojo de la dosierujo ne povas esti malplena.",
+    "The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.": "La jenaj intervaloj estas uzataj: dum la unua horo version restas dum ĉiuj 30 sekundoj, dum la unua tago versio restas konservita dum ĉiu horo, dum la unuaj 30 tagoj versio estas konservita dum ĉiu tago, ĝis la maksimume aĝa versio restas konservita dum ĉiu semajno.",
+    "The following items could not be synchronized.": "La sekvantaj elementoj ne povas esti sinkronigataj.",
+    "The maximum age must be a number and cannot be blank.": "La maksimuma aĝo devas esti nombro kaj ne povas esti malplena.",
+    "The maximum time to keep a version (in days, set to 0 to keep versions forever).": "La maksimuma tempo por konservi version (en tagoj, agordi je 0 por konservi versiojn eterne).",
+    "The minimum free disk space percentage must be a non-negative number between 0 and 100 (inclusive).": "La minimuma libera procento de diskospaco devas esti pozitiva nombro inter 0 kaj 100 (inkluziva).",
+    "The number of days must be a number and cannot be blank.": "La nombro da tagoj devas esti nombro kaj ne povas esti malplena.",
+    "The number of days to keep files in the trash can. Zero means forever.": "La nombro da tagoj por konservi dosierojn en la rubujo. Nulo signifas eterne.",
+    "The number of old versions to keep, per file.": "La nombro da malnovaj versioj por konservi, po ĉiu dosiero.",
+    "The number of versions must be a number and cannot be blank.": "La nombro da versioj devas esti nombro kaj ne povas esti malplena.",
+    "The path cannot be blank.": "La vojo ne povas esti malplena.",
+    "The rate limit must be a non-negative number (0: no limit)": "La rapideca limo devas esti pozitiva nombro (0: senlimo)",
+    "The rescan interval must be a non-negative number of seconds.": "La intervalo de reskano devas esti pozitiva nombro da sekundoj.",
+    "They are retried automatically and will be synced when the error is resolved.": "Ili estas reprovitaj aŭtomate kaj estos sinkronigitaj kiam la eraro estas solvita.",
+    "This Device": "Ĉi tiu Aparato",
+    "This can easily give hackers access to read and change any files on your computer.": "Ĉi tio povas facile doni al kodumuloj atingon por legi kaj ŝanĝi ajnajn dosierojn en via komputilo.",
+    "This is a major version upgrade.": "Ĉi tio estas ĉefversio ĝisdatigita.",
+    "This setting controls the free space required on the home (i.e., index database) disk.": "This setting controls the free space required on the home (i.e., index database) disk.",
+    "Time": "Tempo",
+    "Trash Can File Versioning": "Rubujo ebligas Dosieran Versionadon",
+    "Type": "Tipo",
+    "Unknown": "Nekonata",
+    "Unshared": "Nekomunigita",
+    "Unused": "Neuzita",
+    "Up to Date": "Ĝisdata",
+    "Updated": "Ĝisdatigita",
+    "Upgrade": "Altgradigo",
+    "Upgrade To {%version%}": "Altgradigi Al {{version}}",
+    "Upgrading": "Altgradigata",
+    "Upload Rate": "Alŝutorapideco",
+    "Uptime": "Daŭro de funkciado",
+    "Usage reporting is always enabled for candidate releases.": "Uzada raportado ĉiam ŝaltita por kandidataj ĵetoj.",
+    "Use HTTPS for GUI": "Uzi HTTPS por grafika interfaco.",
+    "Version": "Versio",
+    "Versions Path": "Vojo de Versioj",
+    "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "Versioj estas aŭtomate forigita se ili estas pli malnovaj ol la maksimuma aĝo aŭ superas la nombron da dosieroj permesita en intervalo.",
+    "Warning, this path is a parent directory of an existing folder \"{%otherFolder%}\".": "Averto, ĉi tiu vojo estas parenta dosierujo de ekzistanta dosierujo \"{{otherFolder}}\".",
+    "Warning, this path is a parent directory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Averto, ĉi tiu vojo estas parenta dosierujo de ekzistanta dosierujo \"{{otherFolderLabel}}\" ({{otherFolder}}).",
+    "Warning, this path is a subdirectory of an existing folder \"{%otherFolder%}\".": "Averto, ĉi tiu vojo estas subdosierujo de ekzistanta dosierujo \"{{otherFolder}}\".",
+    "Warning, this path is a subdirectory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Averto, ĉi tiu vojo estas subdosierujo de ekzistanta dosierujo \"{{otherFolderLabel}}\" ({{otherFolder}}).",
+    "When adding a new device, keep in mind that this device must be added on the other side too.": "Dum la aldonado de nova aparato, memoru ke ĉi tiu aparato devas esti aldonita en la alia flanko ankaŭ.",
+    "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Dum la aldonado de nova dosierujo, memoru ke la Dosieruja ID estas uzita por ligi la dosierujojn kune inter aparatoj. Ili estas literfakodistingaj kaj devas kongrui precize inter ĉiuj aparatoj.",
+    "Yes": "Jes",
+    "You can also select one of these nearby devices:": "You can also select one of these nearby devices:",
+    "You can change your choice at any time in the Settings dialog.": "Vi povas ŝanĝi vian elekton iam ajn en la Agorda dialogo.",
+    "You can read more about the two release channels at the link below.": "Vi povas legi plu pri la du eldonkanaloj per la malsupra ligilo.",
+    "You must keep at least one version.": "Vi devas konservi almenaŭ unu version.",
+    "days": "tagoj",
+    "directories": "dosierujoj",
+    "files": "dosieroj",
+    "full documentation": "tuta dokumentado",
+    "items": "elementoj",
+    "{%device%} wants to share folder \"{%folder%}\".": "{{device}} volas komunigi dosierujon \"{{folder}}\".",
+    "{%device%} wants to share folder \"{%folderlabel%}\" ({%folder%}).": "{{device}} volas komunigi dosierujon \"{{folderlabel}}\" ({{folder}})."
+}
--- a/gui/default/assets/lang/lang-es-ES.json
+++ b/gui/default/assets/lang/lang-es-ES.json
@@ -4,11 +4,13 @@
    "A new major version may not be compatible with previous versions.": "Una nueva versión con cambios importantes puede no ser compatible con versiones anteriores.",
    "API Key": "Clave del API",
    "About": "Acerca de",
+    "Action": "Acción",
    "Actions": "Acciones",
    "Add": "Agregar",
    "Add Device": "Agregar el dispositivo",
    "Add Folder": "Agregar Carpeta",
    "Add Remote Device": "Añadir un dispositivo",
+    "Add devices from the introducer to our device list, for mutually shared folders.": "Añadir dispositivos desde el introductor a nuestra lista de dispositivos, para las carpetas compartidas mutuamente.",
    "Add new folder?": "¿Agregar una carpeta nueva?",
    "Address": "Dirección",
    "Addresses": "Direcciones",
@@ -17,55 +19,69 @@
    "Advanced settings": "Ajustes avanzados",
    "All Data": "Todos los datos",
    "Allow Anonymous Usage Reporting?": "¿Deseas permitir el envío anónimo de informes de uso?",
+    "Allowed Networks": "Redes permitidas",
    "Alphabetic": "Alfabético",
+    "An external command handles the versioning. It has to remove the file from the shared folder.": "Un comando externo gestiona las versiones. Tiene que eliminar el fichero de la carpeta compartida.",
    "An external command handles the versioning. It has to remove the file from the synced folder.": "Un comando externo controla la versión. El fichero debe ser eliminado de la carpeta sincronizada.",
    "Anonymous Usage Reporting": "Informe anónimo de uso",
    "Any devices configured on an introducer device will be added to this device as well.": "Cualquier dispositivo configurado en un dispositivo de introducción será añadido también.",
+    "Automatic upgrade now offers the choice between stable releases and release candidates.": "Ahora la actualización automática permite elegir entre versiones estables o versiones candidatas.",
    "Automatic upgrades": "Actualizaciones automáticas",
    "Be careful!": "¡Ten cuidado!",
    "Bugs": "Errores",
    "CPU Utilization": "Uso de CPU",
    "Changelog": "Registro de cambios",
    "Clean out after": "Limpiar tras",
+    "Click to see discovery failures": "Clica para ver fallos de descubrimiento.",
    "Close": "Cerrar",
    "Command": "Acción",
    "Comment, when used at the start of a line": "Comentar, cuando se usa al comienzo de una línea",
    "Compression": "Compresión",
-    "Configured": "Configured",
+    "Configured": "Configurado",
    "Connection Error": "Error de conexión",
    "Connection Type": "Tipo de conexión",
    "Copied from elsewhere": "Copiado de otro sitio",
    "Copied from original": "Copiado del original",
    "Copyright © 2014-2016 the following Contributors:": "Copyright © 2014-2016 los siguientes Colaboradores:",
+    "Copyright © 2014-2017 the following Contributors:": "Copyright © 2014-2017 Los siguientes colaboradores:",
+    "Creating ignore patterns, overwriting an existing file at {%path%}.": "Crear patrones a ignorar, sobreescribiendo un fichero existente en {{path}}.",
    "Danger!": "¡Peligro!",
    "Deleted": "Eliminado",
+    "Device": "Dispositivo",
    "Device \"{%name%}\" ({%device%} at {%address%}) wants to connect. Add new device?": "El dispositivo \"{{name}}\" ({{device}} en la dirección {{address}}) quiere conectarse. Añadir nuevo dispositivo?",
    "Device ID": "ID del Dispositivo",
    "Device Identification": "Identificación del Dispositivo",
    "Device Name": "Nombre del Dispositivo",
    "Devices": "Dispositivos",
    "Disconnected": "Desconectado",
-    "Discovered": "Discovered",
+    "Discovered": "Descubierto",
    "Discovery": "Descubrimiento",
+    "Discovery Failures": "Fallos de Descubrimiento",
    "Documentation": "Documentación",
    "Download Rate": "Velocidad de descarga",
    "Downloaded": "Descargado",
    "Downloading": "Descargando",
    "Edit": "Editar",
-    "Edit Device": "Edit Device",
-    "Edit Folder": "Edit Folder",
+    "Edit Device": "Editar Dispositivo",
+    "Edit Folder": "Editar Carpeta",
    "Editing": "Editando",
+    "Editing {%path%}.": "Editando {{path}}.",
    "Enable NAT traversal": "Permitir NAT transversal",
    "Enable Relaying": "Habilitar Retransmisión",
+    "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Introduce un número no negativo (por ejemplo, \"2.35\") y selecciona una unidad. Los porcentajes son como parte del tamaño total del disco.",
+    "Enter a non-privileged port number (1024 - 65535).": "Introduce un puerto sin privilegios (1024 - 65535).",
    "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Introduzca las direcciones, separadas por comas (\"tcp://ip:port\", \"tcp://host:port\"), o \"dynamic\" para llevar a cabo el descubrimiento automático de la dirección.",
    "Enter ignore patterns, one per line.": "Introducir patrones a ignorar, uno por línea.",
    "Error": "Error",
    "External File Versioning": "Versionado externo de fichero",
    "Failed Items": "Elementos fallidos",
+    "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "Se espera un fallo al conectar a los servidores IPv6 si no hay conectividad IPv6.",
    "File Pull Order": "Orden de obtención de los ficheros",
    "File Versioning": "Versionado de ficheros",
    "File permission bits are ignored when looking for changes. Use on FAT file systems.": "Los bits de permiso de ficheros son ignorados cuando se buscan cambios. Utilizar en sistemas de ficheros FAT.",
+    "Files are moved to .stversions directory when replaced or deleted by Syncthing.": "Los ficheros son movidos a la carpeta .stversions cuando son reemplazados o borrados por Syncthing.",
    "Files are moved to .stversions folder when replaced or deleted by Syncthing.": "Los archivos serán movidos a la carpeta .stversions cuando sean reemplazados o borrados por Syncthing.",
+    "Files are moved to date stamped versions in a .stversions directory when replaced or deleted by Syncthing.": "Los ficheros son movidos a una carpeta .stversions a versiones con control de fecha cuando son reemplazados o borrados por Syncthing.",
    "Files are moved to date stamped versions in a .stversions folder when replaced or deleted by Syncthing.": "Los ficheros son cambiados a versiones con indicación de fecha en una carpeta \".stversions\" cuando son reemplazados o borrados por Syncthing.",
    "Files are protected from changes made on other devices, but changes made on this device will be sent to the rest of the cluster.": "Los ficheros son protegidos por los cambios hechos en otros dispositivos, pero los cambios hechos en este dispositivo serán enviados al resto del grupo (cluster).",
    "Folder": "Carpeta",
@@ -77,8 +93,11 @@
    "GUI": "GUI",
    "GUI Authentication Password": "Password de la Interfaz Gráfica de Usuario (GUI)",
    "GUI Authentication User": "Autentificación de usuario de la Interfaz Gráfica de Usuario (GUI)",
+    "GUI Listen Address": "Dirección de Escucha del GUI.",
    "GUI Listen Addresses": "Direcciones de escucha de la Interfaz Gráfica de Usuario (GUI)",
+    "GUI Theme": "Tema GUI",
    "Generate": "Generar",
+    "Global Changes": "Cambios globales",
    "Global Discovery": "Descubrimiento global",
    "Global Discovery Servers": "Servidores Globales de Descubrimiento",
    "Global State": "Estado global",
@@ -89,6 +108,7 @@
    "Ignore Permissions": "Permisos a ignorar",
    "Incoming Rate Limit (KiB/s)": "Límite de descarga (KiB/s)",
    "Incorrect configuration may damage your folder contents and render Syncthing inoperable.": "Una configuración incorrecta puede dañar los contenidos de la carpeta y hacer  que Syncthing no funcione.",
+    "Introduced By": "Introducido por",
    "Introducer": "Presentador",
    "Inversion of the given condition (i.e. do not exclude)": "Inversión de la condición dada (por ejemplo, \"no excluir\")",
    "Keep Versions": "Mantener versiones",
@@ -97,7 +117,8 @@
    "Last Scan": "Último escaneo",
    "Last seen": "Visto por última vez",
    "Later": "Más tarde",
-    "Latest Change": "Latest Change",
+    "Latest Change": "Último Cambio",
+    "Learn more": "Saber más",
    "Listeners": "Oyentes",
    "Local Discovery": "Descubrimiento local",
    "Local State": "Estado local",
@@ -115,6 +136,7 @@
    "Newest First": "El más nuevo primero",
    "No": "No",
    "No File Versioning": "Sin versionado de fichero",
+    "No upgrades": "Sin actualizaciones",
    "Normal": "Normal",
    "Notice": "Aviso",
    "OK": "OK",
@@ -126,20 +148,26 @@
    "Out of Sync Items": "Elementos no sincronizados",
    "Outgoing Rate Limit (KiB/s)": "Límite de subida (KiB/s)",
    "Override Changes": "Anular cambios",
+    "Path": "Parche",
    "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Ruta a la carpeta en la máquina local. Se creará si no existe. El carácter de la tilde (~) puede usarse como atajo.",
+    "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).": "La ruta donde las versiones deben ser almacenadas (dejar vacío para el directorio .stversions por defecto en la carpeta compartida).",
    "Path where versions should be stored (leave empty for the default .stversions folder in the folder).": "Ruta donde se almacenarán las versiones (dejar vacío para usar la carpeta por defecto \".stversions\").",
    "Pause": "Pausar",
+    "Pause All": "Pausar todo",
    "Paused": "Pausado",
    "Please consult the release notes before performing a major upgrade.": "Por favor, consultar las notas de la versión antes de realizar una actualización importante.",
    "Please set a GUI Authentication User and Password in the Settings dialog.": "Por favor, introduzca un Usuario y Contraseña para la Autenticación de la Interfaz de Usuario en el panel de Ajustes.",
    "Please wait": "Por favor, espere",
+    "Prefix indicating that the file can be deleted if preventing directory removal": "Prefix indicating that the file can be deleted if preventing directory removal",
+    "Prefix indicating that the pattern should be matched without case sensitivity": "Prefix indicating that the pattern should be matched without case sensitivity",
    "Preview": "Vista previa",
    "Preview Usage Report": "Informe de uso de vista previa",
    "Quick guide to supported patterns": "Guía rápida de patrones soportados",
    "RAM Utilization": "Uso de RAM",
    "Random": "Aleatorio",
-    "Reduced by ignore patterns": "Reduced by ignore patterns",
+    "Reduced by ignore patterns": "Reducido por patrones de ignorar",
    "Release Notes": "Notas de la versión",
+    "Release candidates contain the latest features and fixes. They are similar to the traditional bi-weekly Syncthing releases.": "Las versiones candidatas contienen las últimas funcionalidades y correcciones. Son similares a las tradicionales versiones bisemanales de Syncthing.",
    "Remote Devices": "Otros dispositivos",
    "Remove": "Eliminar",
    "Required identifier for the folder. Must be the same on all cluster devices.": "Identificador requerido para la carpeta. Debe ser el mismo en todos los dispositivos del clúster.",
@@ -150,14 +178,15 @@
    "Restart Needed": "Reinicio necesario",
    "Restarting": "Reiniciando",
    "Resume": "Continuar",
+    "Resume All": "Continuar todo",
    "Reused": "Reutilizado",
    "Save": "Guardar",
    "Scan Time Remaining": "Tiempo Restante de Escaneo",
    "Scanning": "Analizando",
    "Select the devices to share this folder with.": "Selecciona los dispositivos con los que compartir esta carpeta.",
    "Select the folders to share with this device.": "Selecciona las carpetas para compartir con este dispositivo.",
-    "Send & Receive": "Send & Receive",
-    "Send Only": "Send Only",
+    "Send & Receive": "Enviar y Recibir",
+    "Send Only": "Solo Enviar",
    "Settings": "Ajustes",
    "Share": "Compartir",
    "Share Folder": "Compartir carpeta",
@@ -175,6 +204,9 @@
    "Single level wildcard (matches within a directory only)": "Comodín de nivel único (coincide solamente dentro de un directorio)",
    "Smallest First": "El más pequeño primero",
    "Source Code": "Código fuente",
+    "Stable releases and release candidates": "Versiones estables y versiones candidatas",
+    "Stable releases are delayed by about two weeks. During this time they go through testing as release candidates.": "Las versiones estables son publicadas cada dos semanas. Durante este tiempo son probadas como versiones candidatas.",
+    "Stable releases only": "Solo versiones estables",
    "Staggered File Versioning": "Versionado escalonado de fichero",
    "Start Browser": "Iniciar el navegador",
    "Statistics": "Estadísticas",
@@ -215,7 +247,10 @@
    "This Device": "Este Dispositivo",
    "This can easily give hackers access to read and change any files on your computer.": "Esto podría permitir fácilmente el acceso a hackers para leer y modificar cualquier fichero de tu equipo.",
    "This is a major version upgrade.": "Hay una actualización importante.",
+    "This setting controls the free space required on the home (i.e., index database) disk.": "Este ajuste controla el espacio libre necesario en el disco principal (por ejemplo, el índice de la base de datos).",
+    "Time": "Hora",
    "Trash Can File Versioning": "Versionado de archivos de la papelera",
+    "Type": "Tipo",
    "Unknown": "Desconocido",
    "Unshared": "No compartido",
    "Unused": "No usado",
@@ -226,18 +261,25 @@
    "Upgrading": "Actualizando",
    "Upload Rate": "Velocidad de subida",
    "Uptime": "Tiempo de funcionamiento",
+    "Usage reporting is always enabled for candidate releases.": "El informe de uso está siempre habilitado en las versiones candidatas.",
    "Use HTTPS for GUI": "Usar HTTPS para la Interfaz Gráfica de Usuario (GUI)",
    "Version": "Versión",
    "Versions Path": "Ruta de las versiones",
    "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "Las versiones se borran automáticamente si son más antiguas que la edad máxima o exceden el número de ficheros permitidos en un intervalo.",
+    "Warning, this path is a parent directory of an existing folder \"{%otherFolder%}\".": "¡Peligro! Esta ruta es un directorio principal de la carpeta ya existente \"{{otherFolder}}\".",
+    "Warning, this path is a parent directory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "'Peligro! Esta ruta es un subdirectorio de la carpeta ya existente \"{{otherFolderLabel}}\"  ({{otherFolder}}).",
    "Warning, this path is a subdirectory of an existing folder \"{%otherFolder%}\".": "Peligro! Esta ruta es un subdirectorio de una carpeta ya existente llamada \"{{otherFolder}}\".",
+    "Warning, this path is a subdirectory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Peligro, esta ruta es un subdirectorio de una carpeta ya existente llamada \"{{otherFolderLabel}}\" ({{otherFolder}}).",
    "When adding a new device, keep in mind that this device must be added on the other side too.": "Cuando añada un nuevo dispositivo, tenga en cuenta que este debe añadirse también en el otro lado.",
    "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Cuando añada una nueva carpeta, tenga en cuenta que su ID se usa para unir carpetas entre dispositivos. Son sensibles a las mayúsculas y deben coincidir exactamente entre todos los dispositivos.",
    "Yes": "Si",
+    "You can also select one of these nearby devices:": "You can also select one of these nearby devices:",
+    "You can change your choice at any time in the Settings dialog.": "Puedes cambiar tu elección en cualquier momento en el panel de Ajustes.",
+    "You can read more about the two release channels at the link below.": "Puedes leer más sobre los dos método de publicación de versiones en el siguiente enlace.",
    "You must keep at least one version.": "Debes mantener al menos una versión.",
    "days": "días",
-    "directories": "directories",
-    "files": "files",
+    "directories": "directorios",
+    "files": "archivos",
    "full documentation": "Documentación completa",
    "items": "Elementos",
    "{%device%} wants to share folder \"{%folder%}\".": "{{device}} quiere compartir la carpeta \"{{folder}}\".",
--- a/gui/default/assets/lang/lang-es.json
+++ b/gui/default/assets/lang/lang-es.json
@@ -1,245 +1,287 @@
 {
-    "A device with that ID is already added.": "Ya se ha agregado un dispositivo con esa ID.",
+    "A device with that ID is already added.": "Ya se ha agregado un equipo con ese ID.",
    "A negative number of days doesn't make sense.": "Un número negativo de días no tiene sentido.",
-    "A new major version may not be compatible with previous versions.": "Una versión más reciente puede no ser compatible con las versiones anteriores.",
-    "API Key": "Clave API",
+    "A new major version may not be compatible with previous versions.": "Una nueva versión con cambios importantes puede no ser compatible con versiones anteriores.",
+    "API Key": "Clave del API",
    "About": "Acerca de",
+    "Action": "Acción",
    "Actions": "Acciones",
    "Add": "Agregar",
-    "Add Device": "Agregar Dispositivo",
-    "Add Folder": "Agregar Repositorio",
+    "Add Device": "Agregar el dispositivo",
+    "Add Folder": "Agregar Carpeta",
    "Add Remote Device": "Añadir un dispositivo",
-    "Add new folder?": "¿Agregar nueva carpeta?",
+    "Add devices from the introducer to our device list, for mutually shared folders.": "Añadir dispositivos desde el introductor a nuestra lista de dispositivos, para las carpetas compartidas mutuamente.",
+    "Add new folder?": "¿Agregar una carpeta nueva?",
    "Address": "Dirección",
    "Addresses": "Direcciones",
-    "Advanced": "Avanzada",
-    "Advanced Configuration": "Configuración avanzada",
-    "Advanced settings": "Optiones avanzadas",
+    "Advanced": "Avanzado",
+    "Advanced Configuration": "Configuración Avanzada",
+    "Advanced settings": "Ajustes avanzados",
    "All Data": "Todos los datos",
-    "Allow Anonymous Usage Reporting?": "Permitir reporte anónimo de uso?",
+    "Allow Anonymous Usage Reporting?": "¿Deseas permitir el envío anónimo de informes de uso?",
+    "Allowed Networks": "Redes permitidas",
    "Alphabetic": "Alfabético",
-    "An external command handles the versioning. It has to remove the file from the synced folder.": "Un comando exterior maneja el control de versiones. Éste tiene que eliminar el archivo de la carpeta sincronizada.",
-    "Anonymous Usage Reporting": "Reporte anónimo de uso",
-    "Any devices configured on an introducer device will be added to this device as well.": "Cualquier dispositivo configurado en un dispositivo introductor será también agregado a tu propio dispositivo.",
+    "An external command handles the versioning. It has to remove the file from the shared folder.": "Un comando externo gestiona las versiones. Tiene que eliminar el fichero de la carpeta compartida.",
+    "An external command handles the versioning. It has to remove the file from the synced folder.": "Un comando externo controla la versión. El fichero debe ser eliminado de la carpeta sincronizada.",
+    "Anonymous Usage Reporting": "Informe anónimo de uso",
+    "Any devices configured on an introducer device will be added to this device as well.": "Cualquier dispositivo configurado en un dispositivo de introducción será añadido también.",
+    "Automatic upgrade now offers the choice between stable releases and release candidates.": "Ahora la actualización automática permite elegir entre versiones estables o versiones candidatas.",
    "Automatic upgrades": "Actualizaciones automáticas",
-    "Be careful!": "¡Sé cuidadoso!",
+    "Be careful!": "¡Ten cuidado!",
    "Bugs": "Errores",
    "CPU Utilization": "Uso de CPU",
    "Changelog": "Registro de cambios",
-    "Clean out after": "Limpiar después",
+    "Clean out after": "Limpiar tras",
+    "Click to see discovery failures": "Clica para ver fallos de descubrimiento.",
    "Close": "Cerrar",
-    "Command": "Comando",
-    "Comment, when used at the start of a line": "Comentario, cuando es utilizado al inicio de una línea.",
+    "Command": "Acción",
+    "Comment, when used at the start of a line": "Comentar, cuando se usa al comienzo de una línea",
    "Compression": "Compresión",
    "Configured": "Configurado",
    "Connection Error": "Error de conexión",
    "Connection Type": "Tipo de conexión",
-    "Copied from elsewhere": "Copiado desde otra parte.",
+    "Copied from elsewhere": "Copiado de otro sitio",
    "Copied from original": "Copiado del original",
-    "Copyright © 2014-2016 the following Contributors:": "Copyright © 2014-2016 los siguientes contribuidores:",
-    "Danger!": "Peligro!",
-    "Deleted": "Suprimido",
-    "Device \"{%name%}\" ({%device%} at {%address%}) wants to connect. Add new device?": "Dispositivo \"{{name}}\" ({{device}} en {{address}}) quiere conectar. ¿Añadir nuevo dispositivo?",
-    "Device ID": "ID del dispositivo",
-    "Device Identification": "Identificación del dispositivo",
-    "Device Name": "Nombre del dispositivo",
+    "Copyright © 2014-2016 the following Contributors:": "Copyright © 2014-2016 los siguientes Colaboradores:",
+    "Copyright © 2014-2017 the following Contributors:": "Copyright © 2014-2017 Los siguientes colaboradores:",
+    "Creating ignore patterns, overwriting an existing file at {%path%}.": "Crear patrones a ignorar, sobreescribiendo un fichero existente en {{path}}.",
+    "Danger!": "¡Peligro!",
+    "Deleted": "Eliminado",
+    "Device": "Dispositivo",
+    "Device \"{%name%}\" ({%device%} at {%address%}) wants to connect. Add new device?": "El dispositivo \"{{name}}\" ({{device}} en la dirección {{address}}) quiere conectarse. Añadir nuevo dispositivo?",
+    "Device ID": "ID del Dispositivo",
+    "Device Identification": "Identificación del Dispositivo",
+    "Device Name": "Nombre del Dispositivo",
    "Devices": "Dispositivos",
    "Disconnected": "Desconectado",
    "Discovered": "Descubierto",
-    "Discovery": "Búsqueda",
+    "Discovery": "Descubrimiento",
+    "Discovery Failures": "Fallos de Descubrimiento",
    "Documentation": "Documentación",
-    "Download Rate": "Tasa de descarga",
+    "Download Rate": "Velocidad de descarga",
    "Downloaded": "Descargado",
    "Downloading": "Descargando",
    "Edit": "Editar",
-    "Edit Device": "Cambiando dispositivo",
-    "Edit Folder": "Cambiando repositorio",
+    "Edit Device": "Editar Dispositivo",
+    "Edit Folder": "Editar Carpeta",
    "Editing": "Editando",
-    "Enable NAT traversal": "Habilitar NAT trasversal",
+    "Editing {%path%}.": "Editando {{path}}.",
+    "Enable NAT traversal": "Permitir NAT transversal",
    "Enable Relaying": "Habilitar Retransmisión",
-    "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Introduce las direcciones (\"tcp://ip:puerto\", \"tcp://huésped:puerto\") separadas por comas, o \"dynamic\" para ejecutar un descubrimiento automático de la dirección. ",
-    "Enter ignore patterns, one per line.": "Añadir patrones de exclusión, uno por línea.",
+    "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Introduce un número no negativo (por ejemplo, \"2.35\") y selecciona una unidad. Los porcentajes son como parte del tamaño total del disco.",
+    "Enter a non-privileged port number (1024 - 65535).": "Introduce un puerto sin privilegios (1024 - 65535).",
+    "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Introduzca las direcciones, separadas por comas (\"tcp://ip:port\", \"tcp://host:port\"), o \"dynamic\" para llevar a cabo el descubrimiento automático de la dirección.",
+    "Enter ignore patterns, one per line.": "Introducir patrones a ignorar, uno por línea.",
    "Error": "Error",
-    "External File Versioning": "Control de versiones externo",
-    "Failed Items": "Artículos fallidos",
-    "File Pull Order": "Orden para coger ficheros",
-    "File Versioning": "Control de versiones",
-    "File permission bits are ignored when looking for changes. Use on FAT file systems.": "Los permisos de archivo son ignorados al buscar cambios. Usar el sistemas de archivos FAT.",
-    "Files are moved to .stversions folder when replaced or deleted by Syncthing.": "Los archivos son movidos al directorio .stversions cuando son reemplazados o eliminados por Syncthing. Sus caminos de accesos relativos son recreados aquí si necesidad. ",
-    "Files are moved to date stamped versions in a .stversions folder when replaced or deleted by Syncthing.": "Lo archivos son movidos al directorio .stversions y renombrados a versiones marcadas por fecha cuando son reemplazados o eliminados por Syncthing, Sus caminos de accesos relativos son recreados aquí si necesidad.",
-    "Files are protected from changes made on other devices, but changes made on this device will be sent to the rest of the cluster.": "Los archivos están protegidos frente a los cambios realizados en otros dispositivos, peros los cambios realizados en este dispositivo serán envíados al resto del grupo",
-    "Folder": "Repositorio",
-    "Folder ID": "ID del repositorio",
-    "Folder Label": "Etiqueta de Carpeta",
-    "Folder Path": "Ruta del repositorio",
-    "Folder Type": "Tipo de Carpeta",
-    "Folders": "Repositorios",
+    "External File Versioning": "Versionado externo de fichero",
+    "Failed Items": "Elementos fallidos",
+    "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "Se espera un fallo al conectar a los servidores IPv6 si no hay conectividad IPv6.",
+    "File Pull Order": "Orden de obtención de los ficheros",
+    "File Versioning": "Versionado de ficheros",
+    "File permission bits are ignored when looking for changes. Use on FAT file systems.": "Los bits de permiso de ficheros son ignorados cuando se buscan cambios. Utilizar en sistemas de ficheros FAT.",
+    "Files are moved to .stversions directory when replaced or deleted by Syncthing.": "Los ficheros son movidos a la carpeta .stversions cuando son reemplazados o borrados por Syncthing.",
+    "Files are moved to .stversions folder when replaced or deleted by Syncthing.": "Los archivos serán movidos a la carpeta .stversions cuando sean reemplazados o borrados por Syncthing.",
+    "Files are moved to date stamped versions in a .stversions directory when replaced or deleted by Syncthing.": "Los ficheros son movidos a una carpeta .stversions a versiones con control de fecha cuando son reemplazados o borrados por Syncthing.",
+    "Files are moved to date stamped versions in a .stversions folder when replaced or deleted by Syncthing.": "Los ficheros son cambiados a versiones con indicación de fecha en una carpeta \".stversions\" cuando son reemplazados o borrados por Syncthing.",
+    "Files are protected from changes made on other devices, but changes made on this device will be sent to the rest of the cluster.": "Los ficheros son protegidos por los cambios hechos en otros dispositivos, pero los cambios hechos en este dispositivo serán enviados al resto del grupo (cluster).",
+    "Folder": "Carpeta",
+    "Folder ID": "ID de carpeta",
+    "Folder Label": "Etiqueta de la Carpeta",
+    "Folder Path": "Ruta de la carpeta",
+    "Folder Type": "Tipo de carpeta",
+    "Folders": "Carpetas",
    "GUI": "GUI",
-    "GUI Authentication Password": "Contraseña de autenticación de la GUI",
-    "GUI Authentication User": "Usuario de la GUI",
-    "GUI Listen Addresses": "Direcciones de escucha para la GUI.",
+    "GUI Authentication Password": "Password de la Interfaz Gráfica de Usuario (GUI)",
+    "GUI Authentication User": "Autentificación de usuario de la Interfaz Gráfica de Usuario (GUI)",
+    "GUI Listen Address": "Dirección de Escucha del GUI.",
+    "GUI Listen Addresses": "Direcciones de escucha de la Interfaz Gráfica de Usuario (GUI)",
+    "GUI Theme": "Tema GUI",
    "Generate": "Generar",
-    "Global Discovery": "Búsqueda en internet",
-    "Global Discovery Servers": "Servidores globales de identificación",
+    "Global Changes": "Cambios globales",
+    "Global Discovery": "Descubrimiento global",
+    "Global Discovery Servers": "Servidores Globales de Descubrimiento",
    "Global State": "Estado global",
    "Help": "Ayuda",
-    "Home page": "Pagina de inicio",
+    "Home page": "Página de inicio",
    "Ignore": "Ignorar",
-    "Ignore Patterns": "Patrones de exclusión",
-    "Ignore Permissions": "Ignorar permisos",
-    "Incoming Rate Limit (KiB/s)": "Límite de velocidad de entrada (KiB/s)",
-    "Incorrect configuration may damage your folder contents and render Syncthing inoperable.": "Configuración incorrecta puede dañar los contenidos de la carpeta y hacer Syncthing inoperable.",
-    "Introducer": "Dispositivo introductor",
-    "Inversion of the given condition (i.e. do not exclude)": "Inversión de la condición dada (es decir, no excluir)",
-    "Keep Versions": "Conservar versiones",
+    "Ignore Patterns": "Patrones a ignorar",
+    "Ignore Permissions": "Permisos a ignorar",
+    "Incoming Rate Limit (KiB/s)": "Límite de descarga (KiB/s)",
+    "Incorrect configuration may damage your folder contents and render Syncthing inoperable.": "Una configuración incorrecta puede dañar los contenidos de la carpeta y hacer  que Syncthing no funcione.",
+    "Introduced By": "Introducido por",
+    "Introducer": "Presentador",
+    "Inversion of the given condition (i.e. do not exclude)": "Inversión de la condición dada (por ejemplo, \"no excluir\")",
+    "Keep Versions": "Mantener versiones",
    "Largest First": "Más grande primero",
    "Last File Received": "Última actualización",
    "Last Scan": "Último escaneo",
-    "Last seen": "Visto por ultima vez",
+    "Last seen": "Visto por última vez",
    "Later": "Más tarde",
-    "Latest Change": "Último cambio",
-    "Listeners": "Receptor",
-    "Local Discovery": "Búsqueda en red local",
+    "Latest Change": "Último Cambio",
+    "Learn more": "Saber más",
+    "Listeners": "Oyentes",
+    "Local Discovery": "Descubrimiento local",
    "Local State": "Estado local",
-    "Local State (Total)": "Estado local (total)",
-    "Major Upgrade": "Actualización mayor",
+    "Local State (Total)": "Estado Local (Total)",
+    "Major Upgrade": "Actualización importante",
    "Master": "Maestro",
    "Maximum Age": "Edad máxima",
    "Metadata Only": "Sólo metadatos",
    "Minimum Free Disk Space": "Espacio mínimo libre en disco",
-    "Move to top of queue": "Mover al principio de la cola.",
-    "Multi level wildcard (matches multiple directory levels)": "Carácter comodín multinivel (coincide en el directorio y  sus subdirectorios)",
+    "Move to top of queue": "Mover al principio de la cola",
+    "Multi level wildcard (matches multiple directory levels)": "Comodín multinivel (coincide con múltiples niveles de directorio)",
    "Never": "Nunca",
-    "New Device": "Nuevo dispositivo",
-    "New Folder": "Nuevo repositorio",
-    "Newest First": "Nuevo primero",
+    "New Device": "Nuevo Dispositivo",
+    "New Folder": "Nueva Carpeta",
+    "Newest First": "El más nuevo primero",
    "No": "No",
-    "No File Versioning": "Sin control de versiones de archivos",
+    "No File Versioning": "Sin versionado de fichero",
+    "No upgrades": "Sin actualizaciones",
    "Normal": "Normal",
    "Notice": "Aviso",
    "OK": "OK",
-    "Off": "Apagado",
-    "Oldest First": "Antiguo primero",
+    "Off": "Desconectar",
+    "Oldest First": "El más antiguo primero",
    "Optional descriptive label for the folder. Can be different on each device.": "Etiqueta descriptiva opcional para la carpeta. Puede ser diferente en cada dispositivo.",
    "Options": "Opciones",
-    "Out of Sync": "Fuera de sincronización",
-    "Out of Sync Items": "Ítems no sincronizados",
-    "Outgoing Rate Limit (KiB/s)": "Tasa máxima de envío (KiB/s)",
-    "Override Changes": "Reemplazar los cambios",
-    "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Ruta del repositorio en el equipo local. Será creado si no existe. El carácter tilde (~) puede ser utilizado como atajo de ",
-    "Path where versions should be stored (leave empty for the default .stversions folder in the folder).": "Ruta donde serán guardas las versiones (dejar vacío para usar el directorio predifinido \".stversions\" en el repositorio)",
-    "Pause": "Pausa",
-    "Paused": "En pausa",
-    "Please consult the release notes before performing a major upgrade.": "Por favor consulta las notas de lanzamiento antes de realizar una actualizacón mayor.",
-    "Please set a GUI Authentication User and Password in the Settings dialog.": "Por favor, establece un Usuario y Contraseña de Autenticación en la GUI en el diálogo de Configuración",
-    "Please wait": "Aguarde por favor",
+    "Out of Sync": "No sincronizado",
+    "Out of Sync Items": "Elementos no sincronizados",
+    "Outgoing Rate Limit (KiB/s)": "Límite de subida (KiB/s)",
+    "Override Changes": "Anular cambios",
+    "Path": "Parche",
+    "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Ruta a la carpeta en la máquina local. Se creará si no existe. El carácter de la tilde (~) puede usarse como atajo.",
+    "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).": "La ruta donde las versiones deben ser almacenadas (dejar vacío para el directorio .stversions por defecto en la carpeta compartida).",
+    "Path where versions should be stored (leave empty for the default .stversions folder in the folder).": "Ruta donde se almacenarán las versiones (dejar vacío para usar la carpeta por defecto \".stversions\").",
+    "Pause": "Pausar",
+    "Pause All": "Pausar todo",
+    "Paused": "Pausado",
+    "Please consult the release notes before performing a major upgrade.": "Por favor, consultar las notas de la versión antes de realizar una actualización importante.",
+    "Please set a GUI Authentication User and Password in the Settings dialog.": "Por favor, introduzca un Usuario y Contraseña para la Autenticación de la Interfaz de Usuario en el panel de Ajustes.",
+    "Please wait": "Por favor, espere",
+    "Prefix indicating that the file can be deleted if preventing directory removal": "Prefix indicating that the file can be deleted if preventing directory removal",
+    "Prefix indicating that the pattern should be matched without case sensitivity": "Prefix indicating that the pattern should be matched without case sensitivity",
    "Preview": "Vista previa",
-    "Preview Usage Report": "Ver reporte de uso",
-    "Quick guide to supported patterns": "Guía rápida sobre los patrones soportados",
-    "RAM Utilization": "Utilización de RAM",
+    "Preview Usage Report": "Informe de uso de vista previa",
+    "Quick guide to supported patterns": "Guía rápida de patrones soportados",
+    "RAM Utilization": "Uso de RAM",
    "Random": "Aleatorio",
-    "Reduced by ignore patterns": "(Restringido por patrones de exclusión)",
-    "Release Notes": "Notas de lanzamiento",
+    "Reduced by ignore patterns": "Reducido por patrones de ignorar",
+    "Release Notes": "Notas de la versión",
+    "Release candidates contain the latest features and fixes. They are similar to the traditional bi-weekly Syncthing releases.": "Las versiones candidatas contienen las últimas funcionalidades y correcciones. Son similares a las tradicionales versiones bisemanales de Syncthing.",
    "Remote Devices": "Otros dispositivos",
    "Remove": "Eliminar",
-    "Required identifier for the folder. Must be the same on all cluster devices.": "Identificación requerida para la carpeta. Debe ser la misma en todos los dispositivos del grupo.",
-    "Rescan": "Reescanear",
-    "Rescan All": "Reescanear todo",
-    "Rescan Interval": "Intervalo de reescaneo",
+    "Required identifier for the folder. Must be the same on all cluster devices.": "Identificador requerido para la carpeta. Debe ser el mismo en todos los dispositivos del clúster.",
+    "Rescan": "Volver a analizar",
+    "Rescan All": "Volver a analizar Todo",
+    "Rescan Interval": "Intervalo de análisis",
    "Restart": "Reiniciar",
-    "Restart Needed": "Es necesario reiniciar",
+    "Restart Needed": "Reinicio necesario",
    "Restarting": "Reiniciando",
-    "Resume": "Reanudar",
+    "Resume": "Continuar",
+    "Resume All": "Continuar todo",
    "Reused": "Reutilizado",
    "Save": "Guardar",
-    "Scan Time Remaining": "Tiempo de Escaneo Restante",
-    "Scanning": "Actualización",
-    "Select the devices to share this folder with.": "Seleccione los dispositivos con los cuales compartir este repositorio.",
-    "Select the folders to share with this device.": "Seleccione los repositorios para compartir con este dispositivo.",
-    "Send & Receive": "Send & Receive",
-    "Send Only": "Send Only",
-    "Settings": "Configuración",
+    "Scan Time Remaining": "Tiempo Restante de Escaneo",
+    "Scanning": "Analizando",
+    "Select the devices to share this folder with.": "Selecciona los dispositivos con los que compartir esta carpeta.",
+    "Select the folders to share with this device.": "Selecciona las carpetas para compartir con este dispositivo.",
+    "Send & Receive": "Enviar y Recibir",
+    "Send Only": "Solo Enviar",
+    "Settings": "Ajustes",
    "Share": "Compartir",
-    "Share Folder": "Compartir repositorio",
-    "Share Folders With Device": "Compartir repositorios con dispositivo",
-    "Share With Devices": "Compartir con los dispositivos",
-    "Share this folder?": "¿Compartir este repositorio?",
-    "Shared With": "Compartido con",
+    "Share Folder": "Compartir carpeta",
+    "Share Folders With Device": "Compartir carpetas con dispositivo",
+    "Share With Devices": "Compartir con dispositivos",
+    "Share this folder?": "¿Deseas compartir esta carpeta?",
+    "Shared With": "Compartir con",
    "Show ID": "Mostrar ID",
    "Show QR": "Mostrar QR",
-    "Shown instead of Device ID in the cluster status. Will be advertised to other devices as an optional default name.": "Mostrado en lugar de la ID del dispositivo en el estado del grupo. Será sugerido a otros dispositivos como nombre fácil de usar predeterminado opcional.",
-    "Shown instead of Device ID in the cluster status. Will be updated to the name the device advertises if left empty.": "Mostrado en lugar de la ID del dispositivo en el estado del grupo. Si se deja en blanco, será llenado por el nombre fácil de usar sugerido por el dispositivo.",
+    "Shown instead of Device ID in the cluster status. Will be advertised to other devices as an optional default name.": "Se muestra en lugar del ID del dispositivo en el estado del grupo (cluster). Se notificará a los otros dispositivos como nombre opcional por defecto.",
+    "Shown instead of Device ID in the cluster status. Will be updated to the name the device advertises if left empty.": "Se muestra en lugar del ID del dispositivo en el estado del grupo (cluster). Se actualizará al nombre que el dispositivo anuncia si se deja vacío.",
    "Shutdown": "Apagar",
-    "Shutdown Complete": "Apagado completado",
-    "Simple File Versioning": "Versiones simple de archivos",
-    "Single level wildcard (matches within a directory only)": "Carácter comodín de un solo nivel (coincide sólo dentro de un directorio)",
-    "Smallest First": "Más pequeño primero",
+    "Shutdown Complete": "Apagar completamente",
+    "Simple File Versioning": "Versionado simple de fichero",
+    "Single level wildcard (matches within a directory only)": "Comodín de nivel único (coincide solamente dentro de un directorio)",
+    "Smallest First": "El más pequeño primero",
    "Source Code": "Código fuente",
-    "Staggered File Versioning": "Versiones del archivo escalonado",
-    "Start Browser": "Iniciar navegador",
+    "Stable releases and release candidates": "Versiones estables y versiones candidatas",
+    "Stable releases are delayed by about two weeks. During this time they go through testing as release candidates.": "Las versiones estables son publicadas cada dos semanas. Durante este tiempo son probadas como versiones candidatas.",
+    "Stable releases only": "Solo versiones estables",
+    "Staggered File Versioning": "Versionado escalonado de fichero",
+    "Start Browser": "Iniciar el navegador",
    "Statistics": "Estadísticas",
-    "Stopped": "Parado",
+    "Stopped": "Detenido",
    "Support": "Forum",
-    "Sync Protocol Listen Addresses": "Dirección de escucha del protocolo de sincronización",
-    "Syncing": "Sincronización",
-    "Syncthing has been shut down.": "La sincronización esta apagada",
-    "Syncthing includes the following software or portions thereof:": "Syncthing incluye los siguientes softwares o partes de ellos:",
-    "Syncthing is restarting.": "Syncthing está reiniciando.",
+    "Sync Protocol Listen Addresses": "Direcciones de escucha del protocolo de sincronización",
+    "Syncing": "Sincronizando",
+    "Syncthing has been shut down.": "Syncthing se ha detenido.",
+    "Syncthing includes the following software or portions thereof:": "Syncthing incluye el siguiente software o partes de él:",
+    "Syncthing is restarting.": "Syncthing se está reiniciando.",
    "Syncthing is upgrading.": "Syncthing se está actualizando.",
-    "Syncthing seems to be down, or there is a problem with your Internet connection. Retrying…": "Syncthing parece estar apagado, o hay un problema con su conexión de Internet. Reintentando...",
-    "Syncthing seems to be experiencing a problem processing your request. Please refresh the page or restart Syncthing if the problem persists.": "Syncthing parece estar experimentando un problema al procesar su solicitud. Por favor, recargue el navegador o reinicie Syncthing si el problema persiste.",
-    "The Syncthing admin interface is configured to allow remote access without a password.": "La interfaz administrativa del Syncthing está configurada para permitir acceso remoto sin una contraseña.",
-    "The aggregated statistics are publicly available at the URL below.": "Las estadísticas agregadas están disponibles públicamente en la dirección de abajo.",
-    "The configuration has been saved but not activated. Syncthing must restart to activate the new configuration.": "La configuración ha sido guardada pero no activada.\nSyncthing debe reiniciarse para activar la nueva configuración.",
-    "The device ID cannot be blank.": "La ID del dispositivo no puede estar en blanco.",
-    "The device ID to enter here can be found in the \"Actions > Show ID\" dialog on the other device. Spaces and dashes are optional (ignored).": "La ID de dispositivo a introducir ser puede encontrar en el menú \"Acciones > Mostrar ID\" en el otro dispositivo. Espacios y guiones son opcionales (ignorados). ",
-    "The encrypted usage report is sent daily. It is used to track common platforms, folder sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.": "El informe de uso se envía encriptado diariamente. Se utiliza para hacer un seguimiento de plataformas comunes, tamaño de repositorios y versiones de la aplicación. Si el conjunto de datos cambia será notificado mediante este dialogo nuevamente.",
-    "The entered device ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.": "La ID del dispositivo introducida no es válida. Debe ser una cadena de 52 o 56 caracteres consistente en letras y números, con espacios y guiones opcionales.",
-    "The first command line parameter is the folder path and the second parameter is the relative path in the folder.": "El primer argumento es la ruta de la carpeta y el segundo argumento es la ruta relativa de esta carpeta.",
-    "The folder ID cannot be blank.": "La ID del repositorio no puede estar en blanco.",
-    "The folder ID must be unique.": "La ID del repositorio debe ser única.",
-    "The folder path cannot be blank.": "La ruta del repositorio no puede estar vacía.",
-    "The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.": "Los siguientes intervalos se utilizan: para la primera hora una versión se mantiene cada 30 segundos, para el primer día de una versión se mantiene cada hora, durante los primeros 30 días de la versión se mantiene todos los días, hasta que la edad máxima de una versión se mantiene cada semana.",
-    "The following items could not be synchronized.": "Los siguientes artículos no pueden ser sincronizados.",
-    "The maximum age must be a number and cannot be blank.": "La edad máxima debe ser un número y no puede estar en blanco.",
-    "The maximum time to keep a version (in days, set to 0 to keep versions forever).": "El tiempo máximo para mantener una versión (en días, establece en 0 para mantener versiones para siempre).",
-    "The minimum free disk space percentage must be a non-negative number between 0 and 100 (inclusive).": "El porcentaje de espacio libre en disco mínimo debe ser un número no negativo entre 0 y 100 (incluidos).",
-    "The number of days must be a number and cannot be blank.": "El número de días debe ser un número y no puede estar vacío.",
-    "The number of days to keep files in the trash can. Zero means forever.": "El tiempo máximo para mantener un archivo en el cubo de basura (en días, establece en 0 para mantener versiones para siempre).",
-    "The number of old versions to keep, per file.": "El numero de versiones anteriores a conservar, por archivo.",
+    "Syncthing seems to be down, or there is a problem with your Internet connection. Retrying…": "Syncthing parece no estar activo o hay un problema con tu conexión de internet. Reintentando...",
+    "Syncthing seems to be experiencing a problem processing your request. Please refresh the page or restart Syncthing if the problem persists.": "Syncthing tiene problemas para procesar tu solicitud. Por favor, actualiza la página o reinicia Syncthing si el problema persiste.",
+    "The Syncthing admin interface is configured to allow remote access without a password.": "El panel de administración de Syncthing está configurado para permitir el acceso remoto sin contraseña.",
+    "The aggregated statistics are publicly available at the URL below.": "Las estadísticas agragadas están disponibles públicamente en la URL de abajo.",
+    "The configuration has been saved but not activated. Syncthing must restart to activate the new configuration.": "La configuración ha sido grabada pero no activada. Syncthing debe reiniciarse para activar la nueva configuración.",
+    "The device ID cannot be blank.": "La ID del dispositivo no puede estar vacía.",
+    "The device ID to enter here can be found in the \"Actions > Show ID\" dialog on the other device. Spaces and dashes are optional (ignored).": "El ID del dispositivo que hay que introducir aquí se puede encontrar en el diálogo \"Acciones > Mostrar ID\" en el otro dispositivo. Los espacios y las barras son opcionales (ignorados).",
+    "The encrypted usage report is sent daily. It is used to track common platforms, folder sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.": "El informe encriptado de uso se envía diariamente. Se usa para rastrear plataformas comunes, tamaños de carpetas y versiones de la aplicación. Si el conjunto de datos enviados en el informes se cambia, se le pedirá a usted autorización de nuevo.",
+    "The entered device ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.": "La ID del dispositivo introducida no parece válida. Debe ser una cadena de 52 ó 56 caracteres formada por letras y números, con espacios y guiones opcionales.",
+    "The first command line parameter is the folder path and the second parameter is the relative path in the folder.": "El primer parámetro del comando es la ruta de la carpeta y el segundo es la ruta relativa en la carpeta.",
+    "The folder ID cannot be blank.": "La ID de la carpeta no puede estar vacía.",
+    "The folder ID must be unique.": "La ID de la carpeta debe ser única.",
+    "The folder path cannot be blank.": "La ruta de la carpeta no puede estar en blanco.",
+    "The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.": "Se utilizan los siguientes intervalos: para la primera hora se mantiene una versión cada 30 segundos, para el primer día se mantiene una versión cada hora, para los primeros 30 días se mantiene una versión diaria hasta la edad máxima de una semana.",
+    "The following items could not be synchronized.": "Los siguientes elementos no pueden ser sincronizados.",
+    "The maximum age must be a number and cannot be blank.": "La edad máxima debe ser un número y no puede estar vacía.",
+    "The maximum time to keep a version (in days, set to 0 to keep versions forever).": "El tiempo máximo para mantener una versión en días (introducir 0 para mantener las versiones indefinidamente).",
+    "The minimum free disk space percentage must be a non-negative number between 0 and 100 (inclusive).": "El porcentaje de espacio libre mínimo debe ser un número no negativo entre 0 y 100 (ambos inclusive).",
+    "The number of days must be a number and cannot be blank.": "El número de días debe ser un número y no puede estar en blanco.",
+    "The number of days to keep files in the trash can. Zero means forever.": "El número de días para mantener los archivos en la papelera. Cero significa \"para siempre\".",
+    "The number of old versions to keep, per file.": "El número de versiones a antiguas a mantener para cada fichero.",
    "The number of versions must be a number and cannot be blank.": "El número de versiones debe ser un número y no puede estar vacío.",
    "The path cannot be blank.": "La ruta no puede estar vacía.",
-    "The rate limit must be a non-negative number (0: no limit)": "El intervalo de reescaneo debe ser un número no negativo de segundos.  (0: no limit)",
-    "The rescan interval must be a non-negative number of seconds.": "El intervalo de reescaneo debe ser un número no negativo de segundos.",
-    "They are retried automatically and will be synced when the error is resolved.": "Los archivos se sincronizan automáticamente cuando el error se resuelve.",
+    "The rate limit must be a non-negative number (0: no limit)": "El límite de velocidad debe ser un número no negativo (0: sin límite)",
+    "The rescan interval must be a non-negative number of seconds.": "El intervalo de actualización debe ser un número positivo de segundos.",
+    "They are retried automatically and will be synced when the error is resolved.": "Se reintentarán de forma automática y se sincronizarán cuando se resuelva el error.",
    "This Device": "Este Dispositivo",
-    "This can easily give hackers access to read and change any files on your computer.": "Esto puede darle permiso a los hackers, podrán acceder a cualquier archivo, pudiéndolos leer y editar.",
-    "This is a major version upgrade.": "Esta es una actualización de version mayor.",
-    "Trash Can File Versioning": "Versiones como cubo de basura",
+    "This can easily give hackers access to read and change any files on your computer.": "Esto podría permitir fácilmente el acceso a hackers para leer y modificar cualquier fichero de tu equipo.",
+    "This is a major version upgrade.": "Hay una actualización importante.",
+    "This setting controls the free space required on the home (i.e., index database) disk.": "Este ajuste controla el espacio libre necesario en el disco principal (por ejemplo, el índice de la base de datos).",
+    "Time": "Hora",
+    "Trash Can File Versioning": "Versionado de archivos de la papelera",
+    "Type": "Tipo",
    "Unknown": "Desconocido",
    "Unshared": "No compartido",
-    "Unused": "No utilizado",
+    "Unused": "No usado",
    "Up to Date": "Actualizado",
    "Updated": "Actualizado",
    "Upgrade": "Actualizar",
    "Upgrade To {%version%}": "Actualizar a {{version}}",
    "Upgrading": "Actualizando",
-    "Upload Rate": "Tasa de subida",
-    "Uptime": "Tiempo en funcionamiento",
-    "Use HTTPS for GUI": "Usar HTTPS para la GUI",
+    "Upload Rate": "Velocidad de subida",
+    "Uptime": "Tiempo de funcionamiento",
+    "Usage reporting is always enabled for candidate releases.": "El informe de uso está siempre habilitado en las versiones candidatas.",
+    "Use HTTPS for GUI": "Usar HTTPS para la Interfaz Gráfica de Usuario (GUI)",
    "Version": "Versión",
-    "Versions Path": "Ruta de versiones",
-    "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "Las versiones se eliminan automáticamente si son mayores de la edad máxima o mayor que el número de archivos permitidos en un intervalo.",
-    "Warning, this path is a subdirectory of an existing folder \"{%otherFolder%}\".": "Atención, esta dirección es un subdirectorio de un directorio existente \"{{otherFolder}}\".",
-    "When adding a new device, keep in mind that this device must be added on the other side too.": "Al agregar un nuevo dispositivo, tenga en cuenta que este dispositivo se debe agregar en el otro lado también.",
-    "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Al agregar un nuevo repositorio, tenga en cuenta que la ID del repositorio se utiliza para conectar los repositorios entre dispositivos. Se distingue entre mayúsculas y minúsculas y debe ser exactamente igual en todos los dispositivos.",
-    "Yes": "Sí",
-    "You must keep at least one version.": "Debe mantener al menos una versión",
+    "Versions Path": "Ruta de las versiones",
+    "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "Las versiones se borran automáticamente si son más antiguas que la edad máxima o exceden el número de ficheros permitidos en un intervalo.",
+    "Warning, this path is a parent directory of an existing folder \"{%otherFolder%}\".": "¡Peligro! Esta ruta es un directorio principal de la carpeta ya existente \"{{otherFolder}}\".",
+    "Warning, this path is a parent directory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "'Peligro! Esta ruta es un subdirectorio de la carpeta ya existente \"{{otherFolderLabel}}\"  ({{otherFolder}}).",
+    "Warning, this path is a subdirectory of an existing folder \"{%otherFolder%}\".": "Peligro! Esta ruta es un subdirectorio de una carpeta ya existente llamada \"{{otherFolder}}\".",
+    "Warning, this path is a subdirectory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Peligro, esta ruta es un subdirectorio de una carpeta ya existente llamada \"{{otherFolderLabel}}\" ({{otherFolder}}).",
+    "When adding a new device, keep in mind that this device must be added on the other side too.": "Cuando añada un nuevo dispositivo, tenga en cuenta que este debe añadirse también en el otro lado.",
+    "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Cuando añada una nueva carpeta, tenga en cuenta que su ID se usa para unir carpetas entre dispositivos. Son sensibles a las mayúsculas y deben coincidir exactamente entre todos los dispositivos.",
+    "Yes": "Si",
+    "You can also select one of these nearby devices:": "You can also select one of these nearby devices:",
+    "You can change your choice at any time in the Settings dialog.": "Puedes cambiar tu elección en cualquier momento en el panel de Ajustes.",
+    "You can read more about the two release channels at the link below.": "Puedes leer más sobre los dos método de publicación de versiones en el siguiente enlace.",
+    "You must keep at least one version.": "Debes mantener al menos una versión.",
    "days": "días",
    "directories": "directorios",
    "files": "archivos",
-    "full documentation": "documentación completa",
-    "items": "ítems",
-    "{%device%} wants to share folder \"{%folder%}\".": "{{device}} quiere compartir repositorio \"{{folder}}\".",
+    "full documentation": "Documentación completa",
+    "items": "Elementos",
+    "{%device%} wants to share folder \"{%folder%}\".": "{{device}} quiere compartir la carpeta \"{{folder}}\".",
    "{%device%} wants to share folder \"{%folderlabel%}\" ({%folder%}).": "{{device}} quiere compartir la carpeta \"{{folderlabel}}\" ({{folder}})."
 }
--- a/gui/default/assets/lang/lang-eu.json
+++ b/gui/default/assets/lang/lang-eu.json
@@ -1,245 +1,287 @@
 {
-    "A device with that ID is already added.": "Id horrekin beste talde bat gehitu da.",
-    "A negative number of days doesn't make sense.": "Hemen 0 edo zenbaki positiboa ,mesedez.",
-    "A new major version may not be compatible with previous versions.": "Aldaketa garrantzitsuak dituen bertsio berria beharbada ez da bateragarria izango bertsio zaharragoekin.",
+    "A device with that ID is already added.": "Id hori duen tresna bat jadanik bada",
+    "A negative number of days doesn't make sense.": "0 edo zenbaki positiboa onartzen da bakarrik",
+    "A new major version may not be compatible with previous versions.": "Aldaketa garrantzitsuak dituen bertsio berri bat ez da beharbada bateragarria izanen bertsio zaharragoekin.",
    "API Key": "API giltza",
-    "About": "Egoki",
+    "About": "Honi buruz",
+    "Action": "Egintza",
    "Actions": "Egintzak",
-    "Add": "Gaineratu",
-    "Add Device": "Gaineratu makina",
-    "Add Folder": "Gaineratu partekatze",
-    "Add Remote Device": "Gaineratu makinan izan",
-    "Add new folder?": "Gaineratu hau partekatze ?",
-    "Address": "Helbide",
-    "Addresses": "Helbidek",
-    "Advanced": "Aditu",
-    "Advanced Configuration": "Konfigurazio aintzinatua",
-    "Advanced settings": "Ezarpen aurreratuak",
+    "Add": "Gehitu",
+    "Add Device": "Tresna gehitu",
+    "Add Folder": "Karpeta gehitu",
+    "Add Remote Device": "Urrundikako tresna bat gehitu",
+    "Add devices from the introducer to our device list, for mutually shared folders.": "Gure tresna zerrendan tresnak gehitzea baimendu, partekatzeetan.",
+    "Add new folder?": "Karpeta berria gehitu?",
+    "Address": "Helbidea",
+    "Addresses": "Helbideak",
+    "Advanced": "Aitzinatua",
+    "Advanced Configuration": "Konfigurazio aitzinatua",
+    "Advanced settings": "Parametro aitzinatuak",
    "All Data": "Datu guziak",
-    "Allow Anonymous Usage Reporting?": "Izenik gabeko erabiltze erreportak baimendu",
+    "Allow Anonymous Usage Reporting?": "Izenik gabeko erabiltze erreportak baimendu?",
+    "Allowed Networks": "Sare baimenduak",
    "Alphabetic": "Alfabetikoa",
-    "An external command handles the versioning. It has to remove the file from the synced folder.": "Kanpoko kontrolagailu batek bertsioak erabiltzen ditu. Fitxeroak errepertorio sinkronizatutik desagertaraztea berari doakio.",
+    "An external command handles the versioning. It has to remove the file from the shared folder.": "Kanpoko kontrolagailu  batek fitxategien bertsioak kudeatzen ditu. Fitxategiak kendu behar ditu errepertorio sinkronizatuan.",
+    "An external command handles the versioning. It has to remove the file from the synced folder.": "Kanpoko kontrolagailu batek fitxeroen bertsioak erabiltzen ditu. Fitxeroak errepertorio sinkronizatutik desagertaraztea berari doakio.",
    "Anonymous Usage Reporting": "Izenik gabeko erabiltze erreportak",
-    "Any devices configured on an introducer device will be added to this device as well.": "Sarrarazle batean sartua izanen edozein tresna dena huntan ere izanen da.",
-    "Automatic upgrades": "Aktualizatze automatikoak",
-    "Be careful!": "Kasu!",
-    "Bugs": "Akatsek",
-    "CPU Utilization": "Prozesadore erabiltze",
-    "Changelog": "Bertsio historia",
+    "Any devices configured on an introducer device will be added to this device as well.": "Sarrarazle deitzen duzun tresna batean gehitua izanen den edozein tresna, zurean ere gehitua izanen da.",
+    "Automatic upgrade now offers the choice between stable releases and release candidates.": "Eguneratze automatiko sistemak iraunkor bertsioen eta aitzineko bertsioen artean hautatzea proposatzen du",
+    "Automatic upgrades": "Eguneratze automatikoak",
+    "Be careful!": "Kasu emazu!",
+    "Bugs": "Akatsak",
+    "CPU Utilization": "Prozesadorearen erabiltzea",
+    "Changelog": "Bertsioen historia",
    "Clean out after": "Garbi …. epearen ondotik",
-    "Close": "Ezeztatu",
+    "Click to see discovery failures": "Klik egin hutsegiteak ikusteko",
+    "Close": "Hetsi",
    "Command": "Kontrolagailua",
    "Comment, when used at the start of a line": "Komentarioa, lerro baten hastean delarik",
    "Compression": "Trinkotze",
    "Configured": "Konfiguratua",
    "Connection Error": "Konexio hutsa",
-    "Connection Type": "Konexion mota",
+    "Connection Type": "Konexio mota",
    "Copied from elsewhere": "Beste nunbaitik kopiatua",
-    "Copied from original": "Kopiatua jatorrizkoatik",
+    "Copied from original": "Jatorrizkotik kopiatua",
    "Copyright © 2014-2016 the following Contributors:": "Copyright 2014-2016, ekarle hauk:",
-    "Danger!": "Lanjer !",
-    "Deleted": "Ezeztatu",
-    "Device \"{%name%}\" ({%device%} at {%address%}) wants to connect. Add new device?": "Makina \"{{name}}\" ({{device}} izan {{address}}) konektatu nahi du. Gaineratu berri makina ?",
-    "Device ID": "Makina ID",
+    "Copyright © 2014-2017 the following Contributors:": "Copyright 2014-2017, ekarle hauk:",
+    "Creating ignore patterns, overwriting an existing file at {%path%}.": "Baztertze modelo batzuen sortzea, dagoen fitxategiari ordaina ezartzea: {{path}}",
+    "Danger!": "Lanjera !",
+    "Deleted": "Kendua",
+    "Device": "Tresna",
+    "Device \"{%name%}\" ({%device%} at {%address%}) wants to connect. Add new device?": "Tresna \"{{name}}\" ({{device}} {{address}} era) konektatu nahi du. Onhartzen duzu ?",
+    "Device ID": "Tresnaren ID-a",
    "Device Identification": "Tresnaren identifikazioa",
-    "Device Name": "Makina izen",
-    "Devices": "Makinak",
-    "Disconnected": "Desloturik",
-    "Discovered": "Ziloa",
-    "Discovery": "Aurkikuntza",
-    "Documentation": "Dokumentazio",
-    "Download Rate": "Deskargatze emari",
-    "Downloaded": "Telekargatua",
-    "Downloading": "Deskargatze",
+    "Device Name": "Tresnaren izena",
+    "Devices": "Tresnak",
+    "Disconnected": "Deskonektatua",
+    "Discovered": "Agertua",
+    "Discovery": "Agertzea",
+    "Discovery Failures": "Agertze hutsegiteak",
+    "Documentation": "Dokumentazioa",
+    "Download Rate": "Deskargatzearen bit-tasa",
+    "Downloaded": "Deskargatua",
+    "Downloading": "Deskargatzea",
    "Edit": "Aldatu",
-    "Edit Device": "Aldaketa tresna",
-    "Edit Folder": "Aldaketa partekatze",
-    "Editing": "Aldaketa",
-    "Enable NAT traversal": "Ahalbidetu NAT",
-    "Enable Relaying": "Ahalbidetu lekua hartu",
-    "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": " (\"tcp://ip:port\" ou \"tcp://nom:port\") zuzenbideak sar, krakotx batez separatuak edo bestenaz \"dynamic\", zuzenbidearen xekatze automatikoa aktibatzeko\nTu peux traduire nom et port dans la parenthèse, c'est pas des variables du programme, juste du texte explicatif",
-    "Enter ignore patterns, one per line.": "Ezkluzio filtroak sar, lerro batean bakar bat",
-    "Error": "Huts",
-    "External File Versioning": "Fitxero bertsioen kanpoko kudeaketa",
-    "Failed Items": "Fitxategiken huts",
-    "File Pull Order": "Fitxategiak irekitzeko agindua",
-    "File Versioning": "Artxiboak babesteko metodoa",
-    "File permission bits are ignored when looking for changes. Use on FAT file systems.": "Aldaketa bilaketetan fitxero baimenen bitak ez dira kontuan hartuko. Fitxero FAT sistimetan erabilia.",
+    "Edit Device": "Tresna aldatzea",
+    "Edit Folder": "Partekatze aldatzea",
+    "Editing": "Aldaketak",
+    "Editing {%path%}.": "Muntatzea {{path}}",
+    "Enable NAT traversal": "NAT translazioa aktibatu",
+    "Enable Relaying": "Aldizkatzea posible",
+    "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Negatiboa ez den zenbaki bat hauta ezazu (\"2.35\" adib.) bai eta unitate bat. Disko osoaren  ehuneko espazioa",
+    "Enter a non-privileged port number (1024 - 65535).": "Abantailatua ez den portu zenbalki bat sar ezazu (1024 - 65535)",
+    "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": " (\"tcp://ip:ataka\", \"tcp://izena:ataka\") zuzenbideak sar, krakotx batez separatuak edo bestenaz \"dynamic\", zuzenbidearen xekatze automatikoa aktibatzeko",
+    "Enter ignore patterns, one per line.": "Ezkluzio filtroak sar, lerro bakoitzean bat bakarrik.",
+    "Error": "Hutsa",
+    "External File Versioning": "Fitxategi bertsioen kanpoko kudeaketa",
+    "Failed Items": "Huts egin duten fitxategiak",
+    "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "IPv6 zerbitzariei buruzko konexioak huts eginen du, IPv6 konektibitaterik ez bada",
+    "File Pull Order": "Fitxategiak berreskuratzeko ordena",
+    "File Versioning": "Fitxategiak zaintzeko metodoa",
+    "File permission bits are ignored when looking for changes. Use on FAT file systems.": "Aldaketa bilaketetan, fitxeroen baimen bitak ez dira kontuan hartuko. Fitxero FAT sistimetan erabilia.",
+    "Files are moved to .stversions directory when replaced or deleted by Syncthing.": "Fitxategiak .stbersioak errepertorioan lekutuak dira, Syncthing-ek ordezkatzen edo kentzen dituelarik",
    "Files are moved to .stversions folder when replaced or deleted by Syncthing.": ".stbersioak azpi karpetan lekutuko dira fitxeroak, Syncthing-ek aldatu edo ezeztatuko dituelarik. Beren helbide errelatiboak hor berean berriz sortuak izanen dira, behar balin bada",
-    "Files are moved to date stamped versions in a .stversions folder when replaced or deleted by Syncthing.": ".stbersioak azpi karpetan lekutuko eta ordu-markatuko dira fitxeroak, Syncthing-ek aldatu edo ezeztatuko dituelarik. Beren helbide errelatiboak hor berean berriz sortuak izanen dira, behar balin bada",
-    "Files are protected from changes made on other devices, but changes made on this device will be sent to the rest of the cluster.": "Beste tresnetan eginak izanen diren aldaketetatik zainduak izanen dira fitxeroak; haatik, tresna huntan egindako aldaketak besteeri hedatuak izanen dira",
+    "Files are moved to date stamped versions in a .stversions directory when replaced or deleted by Syncthing.": "Syncthing-ek aldatzen edo kentzen dituelarik, fitxeroak \".stbertsioak\" peko-errepertoriorat lekutuak dira, jatorrizkoaren berdin berdina den zuhaitz-formako batean",
+    "Files are moved to date stamped versions in a .stversions folder when replaced or deleted by Syncthing.": ".stbersioak azpi karpetan lekutuko eta ordu-markatuko dira fitxeroak, egitura errelatibo berdin batean, Syncthing-ek aldatu edo ezeztatuko dituelarik.",
+    "Files are protected from changes made on other devices, but changes made on this device will be sent to the rest of the cluster.": "Beste tresnetan eginak izanen diren aldaketetatik zainduak izanen dira fitxeroak; haatik, tresna huntan egindako aldaketak besteeri hedatuak izanen dira.",
    "Folder": "Partekatze",
-    "Folder ID": "Partekatze ID",
-    "Folder Label": "Partekatze izengoiti",
-    "Folder Path": "Partekatze bidexka",
+    "Folder ID": "ID partekatze",
+    "Folder Label": "Partekatzearen izena",
+    "Folder Path": "Partekatzearen sustrai bidea",
    "Folder Type": "Partekatze mota",
-    "Folders": "Partekatzek",
-    "GUI": "Interfaze grafiko",
-    "GUI Authentication Password": "Interfaze grafiko pasahitz",
-    "GUI Authentication User": "Interfaze grafiko erabiltzaile",
-    "GUI Listen Addresses": "Interfaze grafiko helbide",
+    "Folders": "Partekatzeak",
+    "GUI": "Interfaze grafikoa",
+    "GUI Authentication Password": "Interfaze grafiko pasahitza",
+    "GUI Authentication User": "Interfaze grafiko erabiltzaile baimendua",
+    "GUI Listen Address": "Interfaze grafiko helbidea",
+    "GUI Listen Addresses": "Interfaze grafiko helbideak",
+    "GUI Theme": "Interfaze grafiko tema",
    "Generate": "Sortu",
-    "Global Discovery": "Aurkikuntza oso",
-    "Global Discovery Servers": "Aurkikuntza oso zerbitzarik",
-    "Global State": "Oso egoera",
-    "Help": "Aiuta",
-    "Home page": "Errezibitze",
-    "Ignore": "Baztertu",
-    "Ignore Patterns": "Bazterketak arauk",
-    "Ignore Permissions": "Baztertu baimenek",
-    "Incoming Rate Limit (KiB/s)": "Deskargatze emari gehieneko (KiB/s)",
-    "Incorrect configuration may damage your folder contents and render Syncthing inoperable.": "Langer !!!!",
-    "Introducer": "Abiarazle",
+    "Global Changes": "Azken aldaketak",
+    "Global Discovery": "Aurkikuntza  orokorra",
+    "Global Discovery Servers": "Orokor aurkikuntza zerbitzaria",
+    "Global State": "Egoera orokorra",
+    "Help": "Laguntza",
+    "Home page": "Harrera",
+    "Ignore": "Kontuan ez hartu",
+    "Ignore Patterns": "Baztertzeak",
+    "Ignore Permissions": "Baimenak kontuan ez hartu",
+    "Incoming Rate Limit (KiB/s)": "Deskargatze emari muga (KiB/s)",
+    "Incorrect configuration may damage your folder contents and render Syncthing inoperable.": "Behar ez den konfigurazio batek zuen partekatzetan makurrak egin ditzake eta Syncthing ezin erabilia utzi",
+    "Introduced By": "...k sartua",
+    "Introducer": "Tresna sarrarazlea",
    "Inversion of the given condition (i.e. do not exclude)": "Emana izan den baldintza alderantziz eman (i.e ez baztertu)",
    "Keep Versions": "Gorde bertsioak",
    "Largest First": "Handienak lehenik",
-    "Last File Received": " Fitxategi azken eskuratu",
-    "Last Scan": "Azterketa azken",
+    "Last File Received": " Azkenik eskuratu fitxategia",
+    "Last Scan": "Azken azterketa",
    "Last seen": "Azken agerraldia",
    "Later": "Berantago",
-    "Latest Change": "Asken aldaketa",
+    "Latest Change": "Azken aldaketa",
+    "Learn more": "Gehiago jakiteko",
    "Listeners": "Entzungailuak",
    "Local Discovery": "Lekuko aurkikuntza",
    "Local State": "Lekuko egoera",
-    "Local State (Total)": "Lekuko egoera (Oso)",
-    "Major Upgrade": "Nagusi eguneratu",
-    "Master": "Nagusi",
-    "Maximum Age": "Goren adin",
+    "Local State (Total)": "Lekuko egoera (Osoa)",
+    "Major Upgrade": "Eguneratze nagusia",
+    "Master": "Nagusia",
+    "Maximum Age": "Adin gehiena",
    "Metadata Only": "Metadatuak bakarrik",
-    "Minimum Free Disk Space": "Diskoan leku libre gutxieneko",
-    "Move to top of queue": "Igurikatze zerrenda bururat lekuz alda",
-    "Multi level wildcard (matches multiple directory levels)": "Hein askorentzako jokerra (errepertorio eta azpi errepertorioeri  dagokiona)",
+    "Minimum Free Disk Space": "Diskoan gutieneko leku libroa ",
+    "Move to top of queue": "Lerro bururat lekuz alda",
+    "Multi level wildcard (matches multiple directory levels)": "Hein anitzerako jokerra (errepertorio eta azpi errepertorioeri  dagokiona)",
    "Never": "Sekulan",
-    "New Device": "Berria makina",
-    "New Folder": "Berri partekatze",
-    "Newest First": "Gehien gertatu berri lehen",
+    "New Device": "Tresna berria",
+    "New Folder": "Partekatze berria",
+    "Newest First": "Berrienak lehenik",
    "No": "Ez",
-    "No File Versioning": "Ez babestu",
-    "Normal": "Normal",
+    "No File Versioning": "Fitxategi bersioen kontrolik ez",
+    "No upgrades": "Eguneratzerik ez",
+    "Normal": "Normala",
    "Notice": "Jakinaraztea",
    "OK": "Ados",
    "Off": "Desgaitu",
-    "Oldest First": "Gehien zahar lehen",
-    "Optional descriptive label for the folder. Can be different on each device.": "Partikatzearen izen hautuzkoa eta atsegina, zure gisa. Tresna bakotxean desberdina izaiten ahal da.",
-    "Options": "Hautuk",
+    "Oldest First": "Zaharrenak lehenik",
+    "Optional descriptive label for the folder. Can be different on each device.": "Partekatzearen izen hautuzkoa eta atsegina, zure gisa. Tresna bakotxean desberdina izaiten ahal da.",
+    "Options": "Hautuzkoak",
    "Out of Sync": "Ez sinkronizatua",
    "Out of Sync Items": "Ez sinkronizatu elementuak",
-    "Outgoing Rate Limit (KiB/s)": "Bidaltze emari gehieneko (KiB/s)",
+    "Outgoing Rate Limit (KiB/s)": "Bidaltze emari gehienekoa (KiB/s)",
    "Override Changes": "Aldaketak desegin",
-    "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Bertako tresnaren karpetari buruzko bidea. Ez balin bada, asmatu beharko da bat. Vous pouvez entrer un chemin absolu (p.ex \"/home/moi/Sync/Exemple\") ou relatif à celui du programme (p.ex \"..\\Partages\\Exemple\" - utile pour installation portable). Tildea (~, edo ~+Espazioa Windows XP+Azerty-n) erabil litzateke bide motz gisa",
-    "Path where versions should be stored (leave empty for the default .stversions folder in the folder).": "Kopiak kontserbatzeko bidea (hutsa utzezazu, .stversioen karpetaren bide ohituan).",
+    "Path": "Bidexka",
+    "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Lekuko tresnaren partekatzeari buruzko bidea. Ez balitz, asmatu beharko da bat. Programarenari, baitezpadako bide bat sartzen ahal duzu (adibidez \"/home/ni/Sync/Etsenplua\") edo bestenaz bide errelatibo bat (adibidez \"..\\Partekatzeak\\Etsenplua\" - instalazio mugikor batentzat baliagarria). Tildea (~, edo ~+Espazioa Windows XP+Azerty-n) erabil litzateke laburbide gisa",
+    "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).": "Kopiak kontserbatzeko bidea (hutsa utz ezazu, .steversioen ohizko bidearentzat, dosier partekatuan)",
+    "Path where versions should be stored (leave empty for the default .stversions folder in the folder).": "Kopiak kontserbatzeko bidea (hutsa utz ezazu, .stversioen ohizko dosierarentzat, karpeta partekatuan)",
    "Pause": "Pausa",
-    "Paused": "Geldirik",
+    "Pause All": "Geldi dena",
+    "Paused": "Gelditua",
    "Please consult the release notes before performing a major upgrade.": "Aktualizatze garrantzitsu bat egin baino lehen, bertsioaren oharrak begira itzazu.",
-    "Please set a GUI Authentication User and Password in the Settings dialog.": "Konfigurazio leihoan asma itzazu erabiltzale izen bat eta sartzeko giltza bat",
-    "Please wait": "Oraino pazientzia pixka bat har ezazu",
+    "Please set a GUI Authentication User and Password in the Settings dialog.": "Konfigurazio leihoan asma itzazu erabiltzale izen bat eta pasahitz bat",
+    "Please wait": "Pazientzia pixka bat, otoi",
+    "Prefix indicating that the file can be deleted if preventing directory removal": "Prefix indicating that the file can be deleted if preventing directory removal",
+    "Prefix indicating that the pattern should be matched without case sensitivity": "Prefix indicating that the pattern should be matched without case sensitivity",
    "Preview": "Aurrebista",
-    "Preview Usage Report": "Erabiltze aurrebista",
-    "Quick guide to supported patterns": "Filtro ez onartuen txostena",
-    "RAM Utilization": "RAM erabiltze",
-    "Random": "Aleatorio",
-    "Reduced by ignore patterns": "(Mugatu baztertzek patroikez)",
+    "Preview Usage Report": "Erabiltze estatistika txostenaren aurrebista",
+    "Quick guide to supported patterns": "Eredu konpatibleen gidaliburuxka",
+    "RAM Utilization": "RAM aren erabiltzea",
+    "Random": "Aleatorioa",
+    "Reduced by ignore patterns": "Baztertze eredu batzuk mugatuak",
    "Release Notes": "Bertsioen notak",
-    "Remote Devices": "Besteak makinak",
+    "Release candidates contain the latest features and fixes. They are similar to the traditional bi-weekly Syncthing releases.": "Azken zuzenketak eta funtzionalitateak edukitzen dituzte aitzin-bertsioek. Bi hilabete guziz egiten diren eguneratzeen berdinak dira.",
+    "Remote Devices": "Beste tresnak",
    "Remove": "Kendu",
-    "Required identifier for the folder. Must be the same on all cluster devices.": "Partikatzearen erabilzaile izena. Diren tresna guzietan berdin berdina izan behar du",
-    "Rescan": "Berreskanea",
-    "Rescan All": "Berreskanea guzia",
-    "Rescan Interval": "Arte berreskanea",
-    "Restart": "Berriz abiatu",
+    "Required identifier for the folder. Must be the same on all cluster devices.": "Partekatzearen erabilzaile izena. Dauden tresna guzietan berdin berdina izan behar du",
+    "Rescan": "Berriz eskaneatu",
+    "Rescan All": "Dena berriz eskaneatu",
+    "Rescan Interval": "Berriz eskaneatzeko tartea",
+    "Restart": "Berriz piztu",
    "Restart Needed": "Berriz piztea beharrezkoa",
    "Restarting": "Berriz piztea martxan",
-    "Resume": "Berriz hasi",
+    "Resume": "Berriz hastea",
+    "Resume All": "Dena berriz hastea",
    "Reused": "Berriz erabilia",
-    "Save": "Begiratu",
-    "Scan Time Remaining": "Gelditzen den denbora azterketa",
-    "Scanning": "Etengabeko azterketa",
-    "Select the devices to share this folder with.": "Honekin sinkronizatua:",
-    "Select the folders to share with this device.": "Tresna hunek erabiltzen dituen banaketak hauta",
-    "Send & Receive": "Igorri & Artu",
-    "Send Only": "Bakarrik igorri",
-    "Settings": "Egokitzek",
-    "Share": "Banatu",
-    "Share Folder": "Banatu",
-    "Share Folders With Device": "Partekatu makinakekin",
-    "Share With Devices": "Partekatuekin makinak",
-    "Share this folder?": "Banatze hau onartzen duzu?",
-    "Shared With": "Partekatuekin",
-    "Show ID": "Erakutsi ene ID",
-    "Show QR": "Erakutsi QR",
-    "Shown instead of Device ID in the cluster status. Will be advertised to other devices as an optional default name.": "Tresnaren ID-aren ordez erakutsia, taldearen egoeran. Beste tresneri erakutsia izanen da, izen erabilgarria bezala",
+    "Save": "Grabatu",
+    "Scan Time Remaining": "Gelditzen den azterketa denbora",
+    "Scanning": "Azterketa martxan",
+    "Select the devices to share this folder with.": " Tresnak hauta itzazu partekatze honekin sinkronizatzeko ",
+    "Select the folders to share with this device.": "Tresna honek erabiltzen dituen partekatzeak hauta itzazu",
+    "Send & Receive": "Igorri eta errezibitu",
+    "Send Only": "Igorrri bakarrik",
+    "Settings": "Konfigurazioa",
+    "Share": "Partekatu",
+    "Share Folder": "Partekatzea",
+    "Share Folders With Device": "Tresnarekin partekatzeak",
+    "Share With Devices": "Tresnekin partekatu",
+    "Share this folder?": "Partekatze hau onartzen duzu?",
+    "Shared With": "...ekin partekatua",
+    "Show ID": "Erakutsi ene ID-a",
+    "Show QR": "Erakutsi QR-a",
+    "Shown instead of Device ID in the cluster status. Will be advertised to other devices as an optional default name.": "Tresnaren ID-aren ordez erakutsia, taldearen egoeran. Beste tresneri erakutsia izanen da, izen erabilgarri bat bezala",
    "Shown instead of Device ID in the cluster status. Will be updated to the name the device advertises if left empty.": "Tresnaren ID-aren ordez erakutsia, taldearen egoeran. Hutsa utzia balin bada, urrun den tresnak proposatu izenarekin aktualizatua izanen da",
-    "Shutdown": "Utzi",
+    "Shutdown": "Geldi",
    "Shutdown Complete": "Gelditua!",
-    "Simple File Versioning": "Bertsioen segitze sinplifikatuak",
+    "Simple File Versioning": "Bertsioen segitze sinplifikatua",
    "Single level wildcard (matches within a directory only)": "Hein bakar bateko jokerra (karpetaren barnean bakarrik dagokiona)",
-    "Smallest First": "Tipienak lehenik",
-    "Source Code": "Iturri kode",
-    "Staggered File Versioning": "Bertsio eskaleratuak",
-    "Start Browser": "Web nabigatzailea pitz",
-    "Statistics": "Statistikak",
+    "Smallest First": "Ttipienak lehenik",
+    "Source Code": "Iturri kodea",
+    "Stable releases and release candidates": "iraunkor eta aintzin-bertsioak",
+    "Stable releases are delayed by about two weeks. During this time they go through testing as release candidates.": "Iraunkor bertsioak bi astez (nonbait han) gibelatuak dira. Bitartean, aintzin-bertsio gisa probatuak izanen dira.",
+    "Stable releases only": "Iraunkor bertsioak bakarrik",
+    "Staggered File Versioning": "Bertsio mailakatuak",
+    "Start Browser": "Web nabigatzailea piztu",
+    "Statistics": "Estatistikak",
    "Stopped": "Gelditua!",
    "Support": "Foroa",
    "Sync Protocol Listen Addresses": "Sinkronizatu protokoloaren entzun zuzenbideak",
-    "Syncing": "Sinkronizazio joaira",
+    "Syncing": "Sinkronizazioa martxan",
    "Syncthing has been shut down.": "Syncthing gelditua izan da",
    "Syncthing includes the following software or portions thereof:": "Syncthing-ek programa hauk integratzen ditu (edo programa hauetatik datozten elementuak):",
    "Syncthing is restarting.": "Syncthing berriz pizten ari",
    "Syncthing is upgrading.": "Syncthing aktualizatzen ari da",
    "Syncthing seems to be down, or there is a problem with your Internet connection. Retrying…": "Iduri luke Syncthing gelditua dela, edo bestenaz arrazo bat bada interneten konekzioarekin. Berriz entsea zaitez…",
-    "Syncthing seems to be experiencing a problem processing your request. Please refresh the page or restart Syncthing if the problem persists.": "Iduri luke Syncthing arazo bat duela zure eskaeraren tratatzeko. Otoi, horria freska ezazu edo bestenaz Syncthing berriz pitz arazoak segitzen badu.",
-    "The Syncthing admin interface is configured to allow remote access without a password.": "Syncthing administrazio interfazea pentsatua da urrundikako irisbideak sekretu hitz gabe onartzeko !!!",
-    "The aggregated statistics are publicly available at the URL below.": "Estadistikak zuzen bide honetan publikoki ikusgarri dira",
-    "The configuration has been saved but not activated. Syncthing must restart to activate the new configuration.": "Konfigurazioa grabatua izan da bainan ez aktibatua. Syncthing berriz piztu behar da konfigurazio berriaren berriz aktibatzeko.",
+    "Syncthing seems to be experiencing a problem processing your request. Please refresh the page or restart Syncthing if the problem persists.": "Iduri luke Syncthing-ek arazo bat duela zure eskaera tratatzeko. Otoi, orrialdea freska ezazu edo bestenaz, arazoak segitzen badu, Syncthing berriz pitz ezazu .",
+    "The Syncthing admin interface is configured to allow remote access without a password.": "Syncthing-en administrazio interfazea pentsatua da urrundikako helbideak pasahitzik gabe onartzeko !",
+    "The aggregated statistics are publicly available at the URL below.": "Estadistikak zuzen bide honetan publikoki ikusgarriak dira",
+    "The configuration has been saved but not activated. Syncthing must restart to activate the new configuration.": "Konfigurazioa grabatua izan da bainan ez aktibatua. Syncthing berriz piztu behar da konfigurazio berria berriz aktibatzeko.",
    "The device ID cannot be blank.": "Tresnaren ID-a ez da hutsa izaiten ahal.",
-    "The device ID to enter here can be found in the \"Actions > Show ID\" dialog on the other device. Spaces and dashes are optional (ignored).": "Tresnaren ID-a atxemaiten ahal da \"Ekintza> Tresna urrunduaren \"ID-a erakuts\" menuan. Espazio eta gioiak ez dira beharrezkoak.",
-    "The encrypted usage report is sent daily. It is used to track common platforms, folder sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.": "Erabileraren zifratu txostena egun guziz igorria da. Erabili diren plataformak, banaketeen neurriak eta aplikazioaren bertsioen zerendatzeko balio du.",
-    "The entered device ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.": "Sartu den tresnaren ID-ak iduri du ez duela balio. 52 edo 56-ko ezaugarriko kadena baten itxura behar luke, hizkiak, zifrak eta baita ere tarte edo gioiez egina",
-    "The first command line parameter is the folder path and the second parameter is the relative path in the folder.": "Agingailu lerroaren lehen parametroa banatua den karpetaren bidea da, eta bigarrena karpetan den errelatibo bidea",
-    "The folder ID cannot be blank.": "banatzearen ID-a ez da hutsa izaiten ahal",
-    "The folder ID must be unique.": "Banatzearen ID-ak bakarra izan behar du",
-    "The folder path cannot be blank.": "Karpetari buruzko bidea ez da hutsa izaiten ahal",
-    "The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.": "Hunako tarteak erabiliak dira: oren bateko denboraldian bertsio bat kontserbatua da 30 segundu guziz. Egun batekoan,bertsio bat egunero. Handik harat, adinaren mugetan egonez, bertsio bat astero.",
+    "The device ID to enter here can be found in the \"Actions > Show ID\" dialog on the other device. Spaces and dashes are optional (ignored).": "Sartu behar den tresnaren ID-a atxemaiten ahal da menuan \"Ekintzak > ID-a erakuts\" (tresna urrunduarena). Espazio eta gioiak ez dira beharrezkoak.",
+    "The encrypted usage report is sent daily. It is used to track common platforms, folder sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.": "Erabileraren zifratu txostena egun guziz igorria da. Erabili diren plataformak, partekatzeen neurriak eta aplikazioaren bertsioen zerendatzeko balio du. Datu orokorrak aldatzen balin badira, mezu honen bidez ontzat emaitea eskatua izanen zaizu.\nErabiltzearen zifratu txostena egun guziz igorria da. Balio du erabiliak izan diren plataformak, partekatzeen izaria eta aplikazioaren bertsioak zerrendatzeko. Datu orokorrek aldatuak izan behar balute, mezu honen bidez ontzat emaitea eskatua izanen zaizu. Zure erabakia aldatzen ahal duzu Ekintzak/Konfigurazioa-ren bidez, baita igortzeen maiztasuna Ekintzak/ aitzinatua/Opzioak -en bidez.",
+    "The entered device ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.": "Sartu den tresnaren ID-ak iduri du ez duela balio. 52 edo 56-ko ezaugarriko kadena baten itxura behar luke, hizkiak, zifrak eta baita ere tarte edo gioiez egina.",
+    "The first command line parameter is the folder path and the second parameter is the relative path in the folder.": "Agingailu lerroaren lehen parametroa partekatzearen bidea da, eta bigarrena partekatzean den bide errelatiboa.",
+    "The folder ID cannot be blank.": "Partekatzearen ID-a ez da hutsa izaiten ahal",
+    "The folder ID must be unique.": "Partekatzearen ID-a bakarra izan behar da",
+    "The folder path cannot be blank.": "Partekatzeari buruzko bidea ez da hutsa izaiten ahal",
+    "The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.": "Hunako tarteak erabiliak dira: lehen orduan bertsio bat kontserbatua da 30 segundu guziz. Lehen egunean, bertsio bat ordu bakoitz, lehen 30 egunetan bertsio bat egunero. Handik harat, adinaren mugetan egonez, bertsio bat astero.",
    "The following items could not be synchronized.": "Ondoko fitxero hauk ez dira sinkronizatuak ahal izan",
    "The maximum age must be a number and cannot be blank.": "Gehieneko adinak zenbaki bat behar du izan eta ez da hutsa izaiten ahal.",
    "The maximum time to keep a version (in days, set to 0 to keep versions forever).": "Bertsio baten kontserbatzeko epe haundiena (egunez behar du izan. Jar ezazu zerotan bertsioak betirako atxikitzeko)",
    "The minimum free disk space percentage must be a non-negative number between 0 and 100 (inclusive).": "Diskoaren ehuneko espazioa hutsak zenbaki positibo bat behar du izan, 0 eta 100-en artekoa (100 barne)",
    "The number of days must be a number and cannot be blank.": "Egunen kopuruak numerikoa izan behar du eta ez da hutsa izaiten ahal",
-    "The number of days to keep files in the trash can. Zero means forever.": "Zikin ontziko elgar hizketen kontserbatzeko egun kopurua. Beti 0 erran nahi du.",
-    "The number of old versions to keep, per file.": "Atxikitzeko diren lehenagoko bertsio kopurua,fitxero bakotxarentzat",
-    "The number of versions must be a number and cannot be blank.": "Bertsio kopuruak numerikoa behar du izan eta ez da hutsa izaiten ahal",
+    "The number of days to keep files in the trash can. Zero means forever.": "Zikin ontzian elgar hizketak kontserbatzeko egun kopurua. Zerok \"betirako\" erran nahi du.",
+    "The number of old versions to keep, per file.": "Atxikitzeko diren lehenagoko bertsioen kopurua, fitxero bakoitzarentzat",
+    "The number of versions must be a number and cannot be blank.": "Bertsioen kopuruak numerikoa behar du izan eta ez da hutsa izaiten ahal",
    "The path cannot be blank.": "Bidea ez da hutsa izaiten ahal",
-    "The rate limit must be a non-negative number (0: no limit)": "Ixuriaren neurria ez da negatiboa izaiten ahal (0 = mugarik gabekoa)",
-    "The rescan interval must be a non-negative number of seconds.": "Ikerketaren tartea ez da segundu kopuru negatiboa izaiten ahal",
-    "They are retried automatically and will be synced when the error is resolved.": "Akatsa zuzendua izanen delarik, automatikoki berriz entseatuak et sinkronizatuak izanen dira",
-    "This Device": "Makina hau",
-    "This can easily give hackers access to read and change any files on your computer.": "Hunek errexki irakurtzen eta aldatzen uzten ahal du zure ordenagailuko edozein fitxero, nahiz eta sartu denak ez haizu!",
+    "The rate limit must be a non-negative number (0: no limit)": "Ixuriaren emaria ez da negatiboa izaiten ahal (0 = mugarik gabekoa)",
+    "The rescan interval must be a non-negative number of seconds.": "Ikerketaren tartea ez da segundo kopuru negatiboa izaiten ahal",
+    "They are retried automatically and will be synced when the error is resolved.": "Errorea zuzendua izanen delarik, automatikoki berriz entseatuak et sinkronizatuak izanen dira",
+    "This Device": "Tresna hau",
+    "This can easily give hackers access to read and change any files on your computer.": "Hunek errexki irakurtzen eta aldatzen uzten ahal du zure ordenagailuko edozein fitxero, nahiz eta sartu denak ez haizu izan!",
    "This is a major version upgrade.": "Aktualizatze garrantzitsu bat da",
+    "This setting controls the free space required on the home (i.e., index database) disk.": "Behar den espazio kontrolatzen du egokitze honek, zure erabiltzale partekatzea geritzatzen duen diskoan (hori da, indexazio datu-basean)",
+    "Time": "Ordua",
    "Trash Can File Versioning": "Zakarrontzia",
-    "Unknown": "Ez ezaguna",
-    "Unshared": "Partekatu ez den",
+    "Type": "Mota",
+    "Unknown": "Ezezaguna",
+    "Unshared": "Partekatua ez dena",
    "Unused": "Ez baliatua",
-    "Up to Date": "Egun",
-    "Updated": "Berritu",
+    "Up to Date": "Eguneratua",
+    "Updated": "Berritua",
    "Upgrade": "Aktualizatu",
-    "Upgrade To {%version%}": "Egunetaratzea {{version}}-i buruz",
+    "Upgrade To {%version%}": "Egunetaratu {{version}}-ari buruz",
    "Upgrading": "Syncthing-en egunetaratzea",
-    "Upload Rate": "Bidaltze emari",
-    "Uptime": "Denbora ibiltze",
-    "Use HTTPS for GUI": "HTTPS-a erabil GUI-arentzat",
-    "Version": "Bertsio",
-    "Versions Path": "Bertsioen egon tokia",
-    "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "Bertsioak automatikoki ezeztatuak izanen dira, kontserbatzeko iraupen denbora pasatua badute edo bitartean onartua den kopurua gainditua balin bada",
-    "Warning, this path is a subdirectory of an existing folder \"{%otherFolder%}\".": "Kasu emazu, \"{{otherFolder}}\" banaketa azpi-karpetaren bidea da. Arazoak emaiten ahal ditu, fitxero batzuen ezeztatze edo duplikatzeak batez ere.",
+    "Upload Rate": "Igortze emaria",
+    "Uptime": "Erabiltze denbora",
+    "Usage reporting is always enabled for candidate releases.": "Erabiltze estatiskitak aintzin-bertsioetan beti igorriak dira",
+    "Use HTTPS for GUI": "HTTPS-a erabil ezazu GUI-arentzat",
+    "Version": "Bertsioa",
+    "Versions Path": "Bertsioen kokalekua",
+    "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "Bertsioak automatikoki ezeztatuak izanen dira, kontserbatzeko iraupen denbora pasatua badute edo bitartean onartua den kopurua (fitxategi bakoitzean) gainditua balin bada",
+    "Warning, this path is a parent directory of an existing folder \"{%otherFolder%}\".": "Kasu, bide hau dagoen partekatze baten karpeta ahaidea da  (adibidez, \"{{otherFolder}}\"). Segitzen baduzu, azpi-karpeta berri bat sortu behar duzu, bestenaz arazoak sortzen ahal dira, fitxategi  kentzeak edo doblatzeak.",
+    "Warning, this path is a parent directory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Kasu, bide hau dagoen partekatze baten karpeta ahaidea da  (adibidez, \"{{otherFolderLabel}}\" ({{otherFolder}}). ",
+    "Warning, this path is a subdirectory of an existing folder \"{%otherFolder%}\".": "Kasu, bide hau \"{{otherFolder}}\" partekatzearen azpi-karpeta da. Arazoak emaiten ahal ditu, fitxategi kentzeak edo doblatzeak, adibidez.",
+    "Warning, this path is a subdirectory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Kasu, bide hau \"{{otherFolderLabel}}\" ({{otherFolder}}) partekatzearen azpi-karpeta da. Arazoak emaiten ahal ditu, fitxategi kentzeak edo doblatzeak, adibidez.",
    "When adding a new device, keep in mind that this device must be added on the other side too.": "Tresna bat gehitzen duzularik, gogoan atxik ezazu zurea bestaldean gehitu behar dela ere",
-    "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Tresna bat gehitzen delarik, gogoan atxik ezazu bere IDa erabilia dela errepertorioak lotzeko tresnen bitartez. ID-a hautskorra da eta banatze huntan parte hartzen duten tresna guzietan berdina izanen da",
+    "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Partekatze bat gehitzen delarik, gogoan atxik ezazu bere IDa erabilia dela errepertorioak lotzeko tresnen bitartez. ID-a hautskorra da eta partekatze hontan parte hartzen duten tresna guzietan berdina izan behar du.",
    "Yes": "Bai",
+    "You can also select one of these nearby devices:": "You can also select one of these nearby devices:",
+    "You can change your choice at any time in the Settings dialog.": "Zure hautua aldatzen ahal duzu \"Konfigurazio\" leihatilan",
+    "You can read more about the two release channels at the link below.": "Bi banaketa kanal hauen bidez gehiago jakin dezakezu, lokarri honen bidez ",
    "You must keep at least one version.": "Bertsio bat bederen behar duzu atxiki",
    "days": "Egunak",
-    "directories": "karpetak",
-    "files": "fitxategik",
+    "directories": "Karpetak",
+    "files": "Fitxategiak",
    "full documentation": "Dokumentazio osoa",
    "items": "Elementuak",
-    "{%device%} wants to share folder \"{%folder%}\".": "{{device}} banaketa \"{{folder}}\" gomitatzen zaitu.",
-    "{%device%} wants to share folder \"{%folderlabel%}\" ({%folder%}).": "{{device}}  \"{{folderlabel}}\" ({{folder}}) gomitatzen zaitu."
+    "{%device%} wants to share folder \"{%folder%}\".": "{{device}}k \"{{folder}}\" partekatze hontan gomitatzen zaitu.",
+    "{%device%} wants to share folder \"{%folderlabel%}\" ({%folder%}).": "{{device}}k  \"{{folderlabel}}\" ({{folder}}) hontan gomitatzen zaitu."
 }
--- a/gui/default/assets/lang/lang-fi.json
+++ b/gui/default/assets/lang/lang-fi.json
@@ -4,11 +4,13 @@
    "A new major version may not be compatible with previous versions.": "Uusi pääversio ei välttämättä ole yhteensopiva aiempien versioiden kanssa.",
    "API Key": "API-avain",
    "About": "Tietoja",
+    "Action": "Action",
    "Actions": "Muokkaa",
    "Add": "Lisää",
    "Add Device": "Lisää laite",
    "Add Folder": "Lisää kansio",
    "Add Remote Device": "Lisää laite",
+    "Add devices from the introducer to our device list, for mutually shared folders.": "Add devices from the introducer to our device list, for mutually shared folders.",
    "Add new folder?": "Lisää uusi kansio?",
    "Address": "Osoite",
    "Addresses": "Osoitteet",
@@ -17,16 +19,20 @@
    "Advanced settings": "Kehittyneet asetukset",
    "All Data": "Kaikki data",
    "Allow Anonymous Usage Reporting?": "Salli anonyymi käyttöraportointi?",
+    "Allowed Networks": "Allowed Networks",
    "Alphabetic": "Aakkosellinen",
+    "An external command handles the versioning. It has to remove the file from the shared folder.": "An external command handles the versioning. It has to remove the file from the shared folder.",
    "An external command handles the versioning. It has to remove the file from the synced folder.": "Ulkoinen komento hallitsee versionnin. Sen täytyy poistaa tiedosto synkronoidusta kansiosta.",
    "Anonymous Usage Reporting": "Anonyymi käyttöraportointi",
    "Any devices configured on an introducer device will be added to this device as well.": "Kaikki esittelijäksi määritetyn laitteen tuntemat laitteet lisätään myös tähän laitteeseen.",
+    "Automatic upgrade now offers the choice between stable releases and release candidates.": "Automatic upgrade now offers the choice between stable releases and release candidates.",
    "Automatic upgrades": "Automaattiset päivitykset",
    "Be careful!": "Ole varovainen!",
    "Bugs": "Bugit",
    "CPU Utilization": "CPU:n käyttö",
    "Changelog": "Muutoshistoria",
    "Clean out after": "Puhdista seuraavan ajan kuluttua",
+    "Click to see discovery failures": "Click to see discovery failures",
    "Close": "Sulje",
    "Command": "Komento",
    "Comment, when used at the start of a line": "Kommentti, käytettäessä rivin alussa",
@@ -37,8 +43,11 @@
    "Copied from elsewhere": "Kopioitu muualta",
    "Copied from original": "Kopioitu alkuperäisestä lähteestä",
    "Copyright © 2014-2016 the following Contributors:": "Copyright © 2014-2016 seuraavat avustajat",
+    "Copyright © 2014-2017 the following Contributors:": "Copyright © 2014-2017 the following Contributors:",
+    "Creating ignore patterns, overwriting an existing file at {%path%}.": "Creating ignore patterns, overwriting an existing file at {{path}}.",
    "Danger!": "Vaara!",
    "Deleted": "Poistettu",
+    "Device": "Laite",
    "Device \"{%name%}\" ({%device%} at {%address%}) wants to connect. Add new device?": "Laite \"{{name}}\" {{device}} osoitteessa ({{address}}) haluaa yhdistää. Lisää uusi laite?",
    "Device ID": "Laitteen ID",
    "Device Identification": "Laitteen tunniste",
@@ -47,25 +56,32 @@
    "Disconnected": "Yhteys katkaistu",
    "Discovered": "Löydetty",
    "Discovery": "Etsintä",
+    "Discovery Failures": "Discovery Failures",
    "Documentation": "Dokumentaatio",
    "Download Rate": "Latausmäärä",
    "Downloaded": "Ladattu",
    "Downloading": "Ladataan",
    "Edit": "Muokkaa",
-    "Edit Device": "Edit Device",
-    "Edit Folder": "Edit Folder",
+    "Edit Device": "Muokkaa laitetta",
+    "Edit Folder": "Muokkaa kansiota",
    "Editing": "Muokkaus",
+    "Editing {%path%}.": "Editing {{path}}.",
    "Enable NAT traversal": "Aktivoi osoitteenmuunnoksen kierto",
    "Enable Relaying": "Aktivoi yhteyden välitys",
+    "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.",
+    "Enter a non-privileged port number (1024 - 65535).": "Enter a non-privileged port number (1024 - 65535).",
    "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Syötä osoitteet pilkuilla erotettuina (\"tcp://ip:portti, tcp://nimi:portti\") tai \"dynamic\" käyttääksesi osoitteen automaattista selvitystä.",
    "Enter ignore patterns, one per line.": "Syötä ohituslausekkeet, yksi riviä kohden.",
    "Error": "Virhe",
    "External File Versioning": "Ulkoinen tiedostoversionti",
    "Failed Items": "Epäonnistuneet kohteet",
+    "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.",
    "File Pull Order": "Tiedostojen noutojärjestys",
    "File Versioning": "Tiedostoversiointi",
    "File permission bits are ignored when looking for changes. Use on FAT file systems.": "Tiedostojen oikeusbitit jätetään huomiotta etsittäessä muutoksia. Käytä FAT-tiedostojärjestelmissä.",
+    "Files are moved to .stversions directory when replaced or deleted by Syncthing.": "Files are moved to .stversions directory when replaced or deleted by Syncthing.",
    "Files are moved to .stversions folder when replaced or deleted by Syncthing.": "Kun Syncthing poistaa tai korvaa tiedostoja, ne siirretään .stversions-hakemistoon.",
+    "Files are moved to date stamped versions in a .stversions directory when replaced or deleted by Syncthing.": "Files are moved to date stamped versions in a .stversions directory when replaced or deleted by Syncthing.",
    "Files are moved to date stamped versions in a .stversions folder when replaced or deleted by Syncthing.": "Tiedostot siirretään päivämäärällä merkityiksi versioiksi .stversions-kansioon, kun Syncthing korvaa tai poistaa ne.",
    "Files are protected from changes made on other devices, but changes made on this device will be sent to the rest of the cluster.": "Tiedostot on suojattu muilla laitteilla tehdyiltä muutoksilta, mutta tällä laitteella tehdyt muutokset lähetetään muuhun ryhmään.",
    "Folder": "Kansio",
@@ -77,8 +93,11 @@
    "GUI": "GUI",
    "GUI Authentication Password": "GUI:n salasana",
    "GUI Authentication User": "GUI:n käyttäjätunnus",
+    "GUI Listen Address": "GUI Listen Address",
    "GUI Listen Addresses": "GUI:n kuunteluosoitteet",
+    "GUI Theme": "GUI Theme",
    "Generate": "Generoi",
+    "Global Changes": "Global Changes",
    "Global Discovery": "Globaali etsintä",
    "Global Discovery Servers": "Globaalit etsintäpalvelimet",
    "Global State": "Globaali tila",
@@ -89,6 +108,7 @@
    "Ignore Permissions": "Jätä oikeudet huomiotta",
    "Incoming Rate Limit (KiB/s)": "Sisääntulevan liikenteen rajoitus (KiB/s)",
    "Incorrect configuration may damage your folder contents and render Syncthing inoperable.": "Virheelliset asetukset voivat vahingoittaa kansion sisältöä tai estää Syncthingin toiminnan.",
+    "Introduced By": "Introduced By",
    "Introducer": "Esittelijä",
    "Inversion of the given condition (i.e. do not exclude)": "Käänteinen ehto (t.s. älä ohita)",
    "Keep Versions": "Säilytä versiot",
@@ -97,7 +117,8 @@
    "Last Scan": "Viimeisin skannaus",
    "Last seen": "Nähty viimeksi",
    "Later": "Myöhemmin",
-    "Latest Change": "Latest Change",
+    "Latest Change": "Viimeisin muutos",
+    "Learn more": "Learn more",
    "Listeners": "Kuuntelijat",
    "Local Discovery": "Paikallinen etsintä",
    "Local State": "Paikallinen tila",
@@ -115,6 +136,7 @@
    "Newest First": "Uusin ensin",
    "No": "Ei",
    "No File Versioning": "Ei tiedostoversiointia",
+    "No upgrades": "Ei päivityksiä",
    "Normal": "Normaali kansio",
    "Notice": "Huomautus",
    "OK": "OK",
@@ -126,13 +148,18 @@
    "Out of Sync Items": "Kohteet, jotka eivät ole ajan tasalla",
    "Outgoing Rate Limit (KiB/s)": "Uloslähtevän liikenteen rajoitus (KiB/s)",
    "Override Changes": "Ohita muutokset",
+    "Path": "Path",
    "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Polku kansioon paikallisella tietokoneella. Kansio luodaan, ellei sitä ole olemassa. Tilde-merkkiä (~) voidaan käyttää oikotienä polulle",
+    "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).": "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).",
    "Path where versions should be stored (leave empty for the default .stversions folder in the folder).": "Polku jonne versiot tullaan tallentamaan (jätä tyhjäksi oletusvalintaa .stversions varten).",
    "Pause": "Keskeytä",
+    "Pause All": "Pause All",
    "Paused": "Keskeytetty",
    "Please consult the release notes before performing a major upgrade.": "Tutustu julkaisutietoihin ennen kuin teet pääversion päivityksen.",
    "Please set a GUI Authentication User and Password in the Settings dialog.": "Ole hyvä ja aseta käyttäjätunnus ja salasana käyttöliittymää varten asetusvalikossa.",
    "Please wait": "Ole hyvä ja odota",
+    "Prefix indicating that the file can be deleted if preventing directory removal": "Prefix indicating that the file can be deleted if preventing directory removal",
+    "Prefix indicating that the pattern should be matched without case sensitivity": "Prefix indicating that the pattern should be matched without case sensitivity",
    "Preview": "Esikatselu",
    "Preview Usage Report": "Esikatsele käyttöraportti",
    "Quick guide to supported patterns": "Tuettujen lausekkeiden pikaohje",
@@ -140,6 +167,7 @@
    "Random": "Satunnainen",
    "Reduced by ignore patterns": "Vähennetty ohituslausekkeiden perusteella",
    "Release Notes": "Julkaisutiedot",
+    "Release candidates contain the latest features and fixes. They are similar to the traditional bi-weekly Syncthing releases.": "Release candidates contain the latest features and fixes. They are similar to the traditional bi-weekly Syncthing releases.",
    "Remote Devices": "Laitteet",
    "Remove": "Poista",
    "Required identifier for the folder. Must be the same on all cluster devices.": "Pakollinen tunniste kansiolle, jonka täytyy olla sama kaikilla laitteilla.",
@@ -150,14 +178,15 @@
    "Restart Needed": "Uudelleenkäynnistys tarvitaan",
    "Restarting": "Käynnistetään uudelleen",
    "Resume": "Jatka",
+    "Resume All": "Resume All",
    "Reused": "Uudelleenkäytetty",
    "Save": "Tallenna",
    "Scan Time Remaining": "Skannausaikaa jäljellä",
    "Scanning": "Skannataan",
    "Select the devices to share this folder with.": "Valitse laitteet, joiden kanssa tämä kansio jaetaan.",
    "Select the folders to share with this device.": "Valitse kansiot jaettavaksi tämän laitteen kanssa.",
-    "Send & Receive": "Send & Receive",
-    "Send Only": "Send Only",
+    "Send & Receive": "Lähetä & vastaanota",
+    "Send Only": "Vain lähetys",
    "Settings": "Asetukset",
    "Share": "Jaa",
    "Share Folder": "Jaa kansio",
@@ -175,6 +204,9 @@
    "Single level wildcard (matches within a directory only)": "Yksitasoinen jokerimerkki (vaikuttaa vain kyseisen kansion sisällä)",
    "Smallest First": "Pienin ensin",
    "Source Code": "Lähdekoodi",
+    "Stable releases and release candidates": "Vakaat julkaisut ja julkaisuehdokkaat",
+    "Stable releases are delayed by about two weeks. During this time they go through testing as release candidates.": "Stable releases are delayed by about two weeks. During this time they go through testing as release candidates.",
+    "Stable releases only": "Vain vakaat julkaisut",
    "Staggered File Versioning": "Porrastettu tiedostoversiointi",
    "Start Browser": "Käynnistä selain",
    "Statistics": "Tilastot",
@@ -215,7 +247,10 @@
    "This Device": "Tämä laite",
    "This can easily give hackers access to read and change any files on your computer.": "Tämä voi helposti sallia vihamielisille tahoille pääsyn lukea ja muokata kaikkia tiedostojasi",
    "This is a major version upgrade.": "Tämä on pääversion päivitys.",
+    "This setting controls the free space required on the home (i.e., index database) disk.": "This setting controls the free space required on the home (i.e., index database) disk.",
+    "Time": "Aika",
    "Trash Can File Versioning": "Roskakorin tiedostoversiointi",
+    "Type": "Tyyppi",
    "Unknown": "Tuntematon",
    "Unshared": "Jakamaton",
    "Unused": "Käyttämätön",
@@ -226,14 +261,21 @@
    "Upgrading": "Päivitetään",
    "Upload Rate": "Lähetysmäärä",
    "Uptime": "Päälläoloaika",
+    "Usage reporting is always enabled for candidate releases.": "Usage reporting is always enabled for candidate releases.",
    "Use HTTPS for GUI": "Käytä HTTPS:ää GUI:n kanssa",
    "Version": "Versio",
    "Versions Path": "Versioiden polku",
    "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "Versiot poistetaan automaattisesti mikäli ne ovat vanhempia kuin maksimi-ikä tai niiden määrä ylittää sallitun määrän tietyllä aikavälillä.",
+    "Warning, this path is a parent directory of an existing folder \"{%otherFolder%}\".": "Varoitus: tämä polku on olemassa olevan kansion \"{{otherFolder}}\" yläkansio.",
+    "Warning, this path is a parent directory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Warning, this path is a parent directory of an existing folder \"{{otherFolderLabel}}\" ({{otherFolder}}).",
    "Warning, this path is a subdirectory of an existing folder \"{%otherFolder%}\".": "Varoitus: tämä polku on olemassa olevan kansion \"{{otherFolder}}\" alikansio.",
+    "Warning, this path is a subdirectory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Warning, this path is a subdirectory of an existing folder \"{{otherFolderLabel}}\" ({{otherFolder}}).",
    "When adding a new device, keep in mind that this device must be added on the other side too.": "Lisättäessä laitetta, muista että tämä laite tulee myös lisätä toiseen laitteeseen.",
    "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Lisättäessä uutta kansiota, muista että kansion ID:tä käytetään solmimaan kansiot yhteen laitteiden välillä. Ne ovat riippuvaisia kirjankoosta ja niiden tulee täsmätä kaikkien laitteiden välillä.",
    "Yes": "Kyllä",
+    "You can also select one of these nearby devices:": "You can also select one of these nearby devices:",
+    "You can change your choice at any time in the Settings dialog.": "You can change your choice at any time in the Settings dialog.",
+    "You can read more about the two release channels at the link below.": "You can read more about the two release channels at the link below.",
    "You must keep at least one version.": "Sinun tulee säilyttää ainakin yksi versio.",
    "days": "päivää",
    "directories": "kansiot",
--- a/gui/default/assets/lang/lang-fr-CA.json
+++ b/gui/default/assets/lang/lang-fr-CA.json
@@ -4,11 +4,13 @@
    "A new major version may not be compatible with previous versions.": "Une nouvelle version majeure peut présenter des incompatibilités avec les versions antérieures.",
    "API Key": "Clé API",
    "About": "À propos",
+    "Action": "Action",
    "Actions": "Actions",
    "Add": "Ajouter",
    "Add Device": "Ajouter l'appareil",
    "Add Folder": "Ajouter un partage",
    "Add Remote Device": "Ajouter un appareil",
+    "Add devices from the introducer to our device list, for mutually shared folders.": "Lui permettre d'ajouter et enlever des membres à toutes mes listes de membres de partages dont il fait partie (ceci permet de créer toutes les liaisons point à point possibles en complétant mes listes par les siennes, meilleur débit de réception par cumul des débits d'envoi, indépendance vis à vis de l'introducteur, etc).",
    "Add new folder?": "Ajouter ce partage ?",
    "Address": "Adresse",
    "Addresses": "Adresses",
@@ -17,16 +19,20 @@
    "Advanced settings": "Paramètres avancés",
    "All Data": "Toutes les données",
    "Allow Anonymous Usage Reporting?": "Autoriser l'envoi de statistiques d'utilisation anonymisées ?",
+    "Allowed Networks": "Réseaux autorisés",
    "Alphabetic": "Alphabétique",
+    "An external command handles the versioning. It has to remove the file from the shared folder.": "Une commande externe gère les versions de fichiers. Il lui incombe de supprimer les fichiers dans le répertoire synchronisé.",
    "An external command handles the versioning. It has to remove the file from the synced folder.": "Une commande externe gère les versions de fichiers. Il lui incombe de supprimer les fichiers dans le répertoire synchronisé.",
    "Anonymous Usage Reporting": "Rapport anonyme de statistiques d'utilisation",
-    "Any devices configured on an introducer device will be added to this device as well.": "Tout appareil ajouté sur un appareil introducteur sera aussi ajouté sur votre propre appareil.",
+    "Any devices configured on an introducer device will be added to this device as well.": "Lui permettre d'ajouter et enlever des membres à toutes mes listes de membres de partages dont il fait partie (ceci permet de créer toutes les liaisons point à point possibles en complétant mes listes par les siennes, meilleur débit de réception par cumul des débits d'envoi, indépendance vis à vis de l'introducteur, etc).",
+    "Automatic upgrade now offers the choice between stable releases and release candidates.": "Le système de mise à jour automatique propose le choix entre versions stables et versions préliminaires.",
    "Automatic upgrades": "Mises à jour automatiques",
    "Be careful!": "Faites attention !",
    "Bugs": "Bugs",
    "CPU Utilization": "Utilisation du CPU",
-    "Changelog": "Historique des changements",
+    "Changelog": "Historique des versions",
    "Clean out after": "Purger après :",
+    "Click to see discovery failures": "Voir les échecs de découverte",
    "Close": "Fermer",
    "Command": "Commande",
    "Comment, when used at the start of a line": "Commentaire lorsque utilisé en début de ligne",
@@ -37,8 +43,11 @@
    "Copied from elsewhere": "Copié d'ailleurs",
    "Copied from original": "Copié depuis l'original",
    "Copyright © 2014-2016 the following Contributors:": "Copyright © 2014-2016, les contributeurs suivants:",
+    "Copyright © 2014-2017 the following Contributors:": "Copyright © 2014-2017, les contributeurs suivants :",
+    "Creating ignore patterns, overwriting an existing file at {%path%}.": "Création de masques d'exclusion, remplacement du fichier existant : {{path}}.",
    "Danger!": "Attention !",
    "Deleted": "Supprimé",
+    "Device": "Appareil",
    "Device \"{%name%}\" ({%device%} at {%address%}) wants to connect. Add new device?": "L'appareil \"{{name}}\" ({{device}} à l'IP {{address}}) souhaite se connecter. L'acceptez-vous ?",
    "Device ID": "ID de l'appareil",
    "Device Identification": "Identifiant de l'appareil",
@@ -47,26 +56,33 @@
    "Disconnected": "Déconnecté",
    "Discovered": "Découvert",
    "Discovery": "Découverte",
+    "Discovery Failures": "Échecs de découverte",
    "Documentation": "Documentation",
    "Download Rate": "Débit de réception",
-    "Downloaded": "Téléchargé",
-    "Downloading": "Téléchargement",
+    "Downloaded": "Reçu",
+    "Downloading": "Réception",
    "Edit": "Modifier",
    "Edit Device": "Modifier l'appareil",
    "Edit Folder": "Modifier le partage",
    "Editing": "Modifications",
+    "Editing {%path%}.": "Modification de {{path}}.",
    "Enable NAT traversal": "Activer transfert d'adresses NAT",
    "Enable Relaying": "Activer le relayage",
+    "Enter a non-negative number (e.g., \"2.35\") and select a unit. Percentages are as part of the total disk size.": "Nombre positif (p.ex, \"2.35\") et unité. Pourcentage de l'espace disque total.",
+    "Enter a non-privileged port number (1024 - 65535).": "Enter a non-privileged port number (1024 - 65535).",
    "Enter comma separated  (\"tcp://ip:port\", \"tcp://host:port\") addresses or \"dynamic\" to perform automatic discovery of the address.": "Entrer les adresses (\"tcp://ip:port\" ou \"tcp://hôte:port\") séparées par une virgule, ou \"dynamic\" afin d'activer la recherche automatique de l'adresse.",
    "Enter ignore patterns, one per line.": "Entrer les masques d'exclusion, un par ligne.",
    "Error": "Erreur",
    "External File Versioning": "Gestion externe des versions de fichiers",
    "Failed Items": "Éléments en échec",
+    "Failure to connect to IPv6 servers is expected if there is no IPv6 connectivity.": "La connexion aux serveurs en IPv6 va échouer s'il n'y a pas de connectivité IPv6.",
    "File Pull Order": "Ordre de récupération de fichier",
    "File Versioning": "Méthode de préservation des fichiers",
    "File permission bits are ignored when looking for changes. Use on FAT file systems.": "Les bits de permission de fichier sont ignorés lors de la recherche de changements. Utilisé sur les systèmes de fichiers FAT.",
+    "Files are moved to .stversions directory when replaced or deleted by Syncthing.": "Les fichiers sont déplacés dans le sous-répertoire .stversions quand ils sont remplacés ou supprimés par Syncthing. Leurs chemins d'accès relatifs y sont recréés si besoin.",
    "Files are moved to .stversions folder when replaced or deleted by Syncthing.": "Les fichiers sont déplacés dans le sous-répertoire .stversions quand ils sont remplacés ou supprimés par Syncthing. Leurs chemins d'accès relatifs y sont recréés si besoin.",
-    "Files are moved to date stamped versions in a .stversions folder when replaced or deleted by Syncthing.": "Les fichiers sont déplacés, avec horodatage, dans le répertoire .stversions quand ils sont remplacés ou supprimés par Syncthing. Leurs chemins d'accès relatifs y sont recréés si besoin.",
+    "Files are moved to date stamped versions in a .stversions directory when replaced or deleted by Syncthing.": "Quand ils sont remplacés ou supprimés par Syncthing, les fichiers sont déplacés et horodatés vers le sous-répertoire .stversions dans une arborescence relative identique à celle de l'original.",
+    "Files are moved to date stamped versions in a .stversions folder when replaced or deleted by Syncthing.": "Quand ils sont remplacés ou supprimés par Syncthing, les fichiers sont déplacés et horodatés vers le sous-répertoire .stversions dans une arborescence relative identique à celle de l'original.",
    "Files are protected from changes made on other devices, but changes made on this device will be sent to the rest of the cluster.": "Les fichiers sont protégés des changements réalisés sur les autres appareils, mais les changements réalisés sur celui-ci seront transférés aux autres.",
    "Folder": "Partage",
    "Folder ID": "ID du partage",
@@ -77,8 +93,11 @@
    "GUI": "Interface graphique",
    "GUI Authentication Password": "Mot de passe d'authentification GUI",
    "GUI Authentication User": "Utilisateur autorisé GUI",
+    "GUI Listen Address": "GUI Listen Address",
    "GUI Listen Addresses": "Adresses de l'interface (GUI)",
+    "GUI Theme": "Thème graphique",
    "Generate": "Générer",
+    "Global Changes": "Derniers changements",
    "Global Discovery": "Découverte globale",
    "Global Discovery Servers": "Serveurs de découverte globale",
    "Global State": "État global",
@@ -87,8 +106,9 @@
    "Ignore": "Ignorer",
    "Ignore Patterns": "Règles d'exclusion",
    "Ignore Permissions": "Ignorer les permissions",
-    "Incoming Rate Limit (KiB/s)": "Limite du débit entrant (KiB/s)",
+    "Incoming Rate Limit (KiB/s)": "Limite du débit de réception (Kio/s)",
    "Incorrect configuration may damage your folder contents and render Syncthing inoperable.": "Une configuration incorrecte peut créer des dommages dans vos répertoires et mettre Syncthing hors-service.",
+    "Introduced By": "Introduit par",
    "Introducer": "Appareil introducteur",
    "Inversion of the given condition (i.e. do not exclude)": "Inverser la condition donnée (i.e. ne pas exclure)",
    "Keep Versions": "Combien de versions conserver",
@@ -98,6 +118,7 @@
    "Last seen": "Dernière apparition",
    "Later": "Plus tard",
    "Latest Change": "Dernier changement",
+    "Learn more": "En savoir plus",
    "Listeners": "Systèmes à l'écoute",
    "Local Discovery": "Découverte locale",
    "Local State": "État local",
@@ -115,6 +136,7 @@
    "Newest First": "Les plus récents en premier",
    "No": "Non",
    "No File Versioning": "Pas de préservation",
+    "No upgrades": "Pas de mises à jour",
    "Normal": "Normal",
    "Notice": "Notification",
    "OK": "OK",
@@ -124,32 +146,39 @@
    "Options": "Options",
    "Out of Sync": "Désynchronisé",
    "Out of Sync Items": "Éléments non synchronisés",
-    "Outgoing Rate Limit (KiB/s)": "Limite du débit sortant (KiB/s)",
+    "Outgoing Rate Limit (KiB/s)": "Limite du débit d'envoi (Kio/s)",
    "Override Changes": "Écraser les changements",
-    "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Chemin vers le répertoire dans l'appareil local. Il sera créé s'il n'existe pas. Vous pouvez entrer un chemin absolu (p.ex \"/home/moi/Sync/Exemple\") ou relatif à celui du programme (p.ex \"..\\Partages\\Exemple\" - utile pour installation portable). Le caractère tilde (~, ou ~+Espace sous Windows XP+Azerty) peut être utilisé comme raccourci vers",
-    "Path where versions should be stored (leave empty for the default .stversions folder in the folder).": "Chemin où les versions doivent être conservées (laisser vide pour le chemin par défaut de .stversions dans le répertoire)",
+    "Path": "Chemin",
+    "Path to the folder on the local computer. Will be created if it does not exist. The tilde character (~) can be used as a shortcut for": "Chemin vers le répertoire à partager dans l'appareil local. Il sera créé s'il n'existe pas. Vous pouvez entrer un chemin absolu (p.ex \"/home/moi/Sync/Exemple\") ou relatif à celui du programme (p.ex \"..\\Partages\\Exemple\" - utile pour installation portable). Le caractère tilde (~, ou ~+Espace sous Windows XP+Azerty) peut être utilisé comme raccourci vers",
+    "Path where versions should be stored (leave empty for the default .stversions directory in the shared folder).": "Chemin où les versions doivent être conservées (laisser vide pour le chemin par défaut de .stversions dans le répertoire partagé).\nChemin relatif ou absolu (recommandé), mais dans un répertoire non synchronisé (par masque ou hors du chemin du partage).\nSur la même partition ou système de fichiers (recommandé).",
+    "Path where versions should be stored (leave empty for the default .stversions folder in the folder).": "Chemin où les versions doivent être conservées (laisser vide pour le chemin par défaut de .stversions dans le répertoire partagé).\nChemin relatif ou absolu (recommandé), mais dans un répertoire non synchronisé (par masque ou hors du chemin du partage).\nSur la même partition ou système de fichiers (recommandé).",
    "Pause": "Pause",
+    "Pause All": "Tout suspendre",
    "Paused": "En pause",
    "Please consult the release notes before performing a major upgrade.": "Veuillez consulter les notes de version avant de réaliser une mise à jour majeure.",
    "Please set a GUI Authentication User and Password in the Settings dialog.": "Veuillez définir un nom d'utilisateur et un mot de passe dans les réglages.",
    "Please wait": "Merci de patienter",
+    "Prefix indicating that the file can be deleted if preventing directory removal": "Prefix indicating that the file can be deleted if preventing directory removal",
+    "Prefix indicating that the pattern should be matched without case sensitivity": "Prefix indicating that the pattern should be matched without case sensitivity",
    "Preview": "Aperçu",
    "Preview Usage Report": "Aperçu du rapport de statistiques d'utilisation",
-    "Quick guide to supported patterns": "Guide rapide des masques supportés",
+    "Quick guide to supported patterns": "Guide rapide des masques compatibles ci-dessous",
    "RAM Utilization": "Utilisation de la RAM",
    "Random": "Aléatoire",
    "Reduced by ignore patterns": "(Limité par des masques d'exclusion)",
    "Release Notes": "Notes de version",
+    "Release candidates contain the latest features and fixes. They are similar to the traditional bi-weekly Syncthing releases.": "Les versions préliminaires contiennent les dernières fonctionnalités et derniers correctifs. Elles sont identiques aux traditionnelles mises à jour bimensuelles.",
    "Remote Devices": "Autres appareils",
    "Remove": "Enlever",
    "Required identifier for the folder. Must be the same on all cluster devices.": "Identifiant du partage. Doit être le même sur tous les appareils concernés.",
    "Rescan": "Réanalyser",
-    "Rescan All": "Réanalyser tout",
+    "Rescan All": "Tout réanalyser",
    "Rescan Interval": "Intervalle d'analyse",
    "Restart": "Redémarrer",
    "Restart Needed": "Redémarrage nécessaire",
    "Restarting": "Redémarrage en cours",
    "Resume": "Reprise",
+    "Resume All": "Tout libérer",
    "Reused": "Réutilisé",
    "Save": "Enregistrer",
    "Scan Time Remaining": "Temps d'analyse restant",
@@ -157,7 +186,7 @@
    "Select the devices to share this folder with.": "Synchroniser avec :",
    "Select the folders to share with this device.": "Sélectionner les partages auxquels participe cet appareil.",
    "Send & Receive": "Envoi & réception",
-    "Send Only": "Envoi seulement",
+    "Send Only": "Envoi (lecture seule)",
    "Settings": "Configuration",
    "Share": "Partager",
    "Share Folder": "Partager",
@@ -175,6 +204,9 @@
    "Single level wildcard (matches within a directory only)": "Joker à un seul niveau (correspond uniquement à l’intérieur du répertoire)",
    "Smallest First": "Les plus petits d'abord",
    "Source Code": "Code source",
+    "Stable releases and release candidates": "Versions stables et préliminaires",
+    "Stable releases are delayed by about two weeks. During this time they go through testing as release candidates.": "Les versions stables sont reportées d'environ deux semaines. Pendant ce temps elles sont testées en tant que versions préliminaires.",
+    "Stable releases only": "Seulement les versions stables",
    "Staggered File Versioning": "Versions échelonnées",
    "Start Browser": "Lancer le navigateur web",
    "Statistics": "Statistiques",
@@ -193,20 +225,20 @@
    "The configuration has been saved but not activated. Syncthing must restart to activate the new configuration.": "La configuration a été enregistrée mais pas activée. Syncthing doit redémarrer afin d'activer la nouvelle configuration.",
    "The device ID cannot be blank.": "L'ID de l'appareil ne peut être vide.",
    "The device ID to enter here can be found in the \"Actions > Show ID\" dialog on the other device. Spaces and dashes are optional (ignored).": "L'ID d'appareil à saisir ici se trouve dans le menu \"Actions > Afficher mon ID\" sur l'appareil distant. Les tirets et espaces sont optionnels (et ignorés).",
-    "The encrypted usage report is sent daily. It is used to track common platforms, folder sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.": "Le rapport d'utilisation chiffré est envoyé quotidiennement. Il sert à répertorier les plates-formes utilisées, la taille des partages et les versions de l'application. Si les données rapportées sont modifiées cette boite de dialogue vous redemandera votre confirmation.",
+    "The encrypted usage report is sent daily. It is used to track common platforms, folder sizes and app versions. If the reported data set is changed you will be prompted with this dialog again.": "Le rapport d'utilisation chiffré est envoyé quotidiennement. Il sert à répertorier les plates-formes utilisées, la taille des partages et les versions de l'application. Si le jeu de données rapportées devait être changé, il vous serait demandé de valider de nouveau son envoi via ce message. Vous pouvez revenir sur votre décision via Actions/Configuration, et agir sur la fréquence d'envoi via Actions/Avancé/Options (urInitialDelayS).",
    "The entered device ID does not look valid. It should be a 52 or 56 character string consisting of letters and numbers, with spaces and dashes being optional.": "L'ID de l'appareil inséré ne semble pas valide. Il devrait ressembler à une chaîne de 52 ou 56 caractères comprenant des lettres, des chiffres et potentiellement des espaces et des traits d'union.",
    "The first command line parameter is the folder path and the second parameter is the relative path in the folder.": "Le premier paramètre de ligne de commande est le chemin du répertoire partagé, et le second est le chemin relatif dans le répertoire.",
    "The folder ID cannot be blank.": "L'identifiant du partage ne peut être vide.",
    "The folder ID must be unique.": "L'ID du partage doit être unique.",
    "The folder path cannot be blank.": "Le chemin vers le répertoire ne peut pas être vide.",
-    "The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.": "Les intervalles suivant sont utilisés: jusqu'à une heure une version est conservée toutes les 30 secondes. Jusqu'à un jour une version est conservée chaque heure. Jusqu'à 30 jours une version est conservée chaque jour. Au-delà, jusqu'à la limite d'âge, une version est conservée chaque semaine.",
+    "The following intervals are used: for the first hour a version is kept every 30 seconds, for the first day a version is kept every hour, for the first 30 days a version is kept every day, until the maximum age a version is kept every week.": "Les seuils de durée suivants définissent le nombre maximum de versions pour chaque fichier : pendant la première heure une version peut être conservée toutes les 30 secondes. Jusqu'à un jour, jusqu'à une version par heure - des versions de la première heure sont alors progressivement effacées pour n'en garder qu'une par heure. Jusqu'à 30 jours, jusqu'à une version par jour - des versions horaires du premier jour sont alors progressivement effacées pour n'en garder qu'une par jour. Au-delà, jusqu'à la limite d'âge, jusqu'à une version est conservée par semaine - des versions journalières du premier mois sont alors progressivement effacées pour n'en garder qu'une par semaine.",
    "The following items could not be synchronized.": "Les fichiers suivants n'ont pas pu être synchronisés.",
    "The maximum age must be a number and cannot be blank.": "L'âge maximum doit être un nombre et ne peut être vide.",
-    "The maximum time to keep a version (in days, set to 0 to keep versions forever).": "Le temps maximum de conservation d'une version (en jours, mettre à 0 pour conserver les versions indéfiniment)",
+    "The maximum time to keep a version (in days, set to 0 to keep versions forever).": "Durée maximum de conservation d'une version (en jours, 0 pour conserver les versions indéfiniment)",
    "The minimum free disk space percentage must be a non-negative number between 0 and 100 (inclusive).": "Le pourcentage d'espace disque libre doit être un nombre positif compris entre 0 et 100 (inclus).",
    "The number of days must be a number and cannot be blank.": "Le nombre de jours doit être numérique et ne peut pas être vide.",
    "The number of days to keep files in the trash can. Zero means forever.": "Le nombre de jours de conservation des fichiers dans la poubelle. 0 signifie toujours.",
-    "The number of old versions to keep, per file.": "Le nombre d'anciennes versions à garder, par fichier.",
+    "The number of old versions to keep, per file.": "Le nombre maximum d'anciennes versions à garder indéfiniment, par fichier.",
    "The number of versions must be a number and cannot be blank.": "Le nombre de versions doit être numérique, et ne peut pas être vide.",
    "The path cannot be blank.": "Le chemin ne peut pas être vide.",
    "The rate limit must be a non-negative number (0: no limit)": "La limite de débit ne doit pas être négative (0 = pas de limite)",
@@ -215,30 +247,40 @@
    "This Device": "Cet appareil",
    "This can easily give hackers access to read and change any files on your computer.": "Ceci peut aisément permettre à un intrus de lire et modifier n'importe quel fichier de votre ordinateur.  ",
    "This is a major version upgrade.": "Il s'agit d'une mise à jour majeure.",
+    "This setting controls the free space required on the home (i.e., index database) disk.": "Ce réglage contrôle l'espace disque requis dans le disque qui abrite votre répertoire utilisateur (pour la base de données d'indexation).",
+    "Time": "Heure",
    "Trash Can File Versioning": "Style poubelle",
+    "Type": "Type",
    "Unknown": "Inconnu",
    "Unshared": "Non partagé",
    "Unused": "Non utilisé",
-    "Up to Date": "Synchronisé",
+    "Up to Date": "À jour",
    "Updated": "Mis à jour",
    "Upgrade": "Mettre à jour",
    "Upgrade To {%version%}": "Mettre à jour vers {{version}}",
    "Upgrading": "Mise à jour de Syncthing",
    "Upload Rate": "Débit d'envoi",
    "Uptime": "Durée de fonctionnement",
+    "Usage reporting is always enabled for candidate releases.": "Les statistiques d'utilisation sont toujours envoyées pour les versions préliminaires.",
    "Use HTTPS for GUI": "Utiliser l'HTTPS pour le GUI",
    "Version": "Version",
    "Versions Path": "Emplacement des versions",
-    "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "Les versions seront supprimées automatiquement, si elles dépassent la durée maximum de conservation, ou si leur nombre est supérieur à la valeur autorisée dans l'intervalle.",
-    "Warning, this path is a subdirectory of an existing folder \"{%otherFolder%}\".": "Attention, ce chemin est un sous-répertoire du partage existant \"{{otherFolder}}\". Ceci peut causer des problèmes tels que duplications de fichiers ou suppressions intempestives sur les autres machines.",
+    "Versions are automatically deleted if they are older than the maximum age or exceed the number of files allowed in an interval.": "Les plus anciennes versions seront supprimées automatiquement quand elles dépassent la durée maximum de conservation ou si leur nombre (par fichier) est supérieur à la limite prédéfinie pour l'intervalle.",
+    "Warning, this path is a parent directory of an existing folder \"{%otherFolder%}\".": "Attention, ce chemin est un répertoire parent d'au moins un partage existant (par exemple \"{{otherFolder}}\"). Si vous continuez, vous devriez créer un nouveau sous-répertoire, sinon ceci peut causer des problèmes tels que duplications et/ou suppressions intempestives de fichiers.",
+    "Warning, this path is a parent directory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "Attention, ce chemin est un répertoire parent d'au moins un partage existant (par exemple \"{{otherFolderLabel}}\" ({{otherFolder}})). Si vous continuez, vous devriez créer un nouveau sous-répertoire, sinon ceci peut causer des problèmes tels que duplications et/ou suppressions intempestives de fichiers.",
+    "Warning, this path is a subdirectory of an existing folder \"{%otherFolder%}\".": "ATTENTION, ce chemin est un sous-répertoire du partage existant \"{{otherFolder}}\". Ceci peut causer des problèmes tels que duplications et/ou suppressions intempestives de fichiers.",
+    "Warning, this path is a subdirectory of an existing folder \"{%otherFolderLabel%}\" ({%otherFolder%}).": "ATTENTION, ce chemin est un sous-répertoire du partage existant \"{{otherFolderLabel}}\" ({{otherFolder}}). Ceci peut causer des problèmes tels que duplications et/ou suppressions intempestives de fichiers.",
    "When adding a new device, keep in mind that this device must be added on the other side too.": "Lorsque vous ajoutez un appareil, gardez à l'esprit que le votre doit aussi être ajouté de l'autre coté.",
    "When adding a new folder, keep in mind that the Folder ID is used to tie folders together between devices. They are case sensitive and must match exactly between all devices.": "Lorsqu'un nouveau partage est ajouté, gardez à l'esprit que son ID est utilisée pour lier les répertoires à travers les appareils. L'ID est sensible à la casse et sera forcément la même sur tous les appareils participant à ce partage.",
    "Yes": "Oui",
+    "You can also select one of these nearby devices:": "You can also select one of these nearby devices:",
+    "You can change your choice at any time in the Settings dialog.": "Vous pouvez changer votre choix dans la boîte de dialogue \"Configuration\".",
+    "You can read more about the two release channels at the link below.": "Vous pouvez en savoir plus sur les deux canaux de distribution via le lien ci-dessous.",
    "You must keep at least one version.": "Vous devez garder au minimum une version.",
    "days": "Jours",
    "directories": "répertoires",
    "files": "fichiers",
-    "full documentation": "documentation complète",
+    "full documentation": "Documentation complète ici",
    "items": "éléments",
    "{%device%} wants to share folder \"{%folder%}\".": "{{device}} vous invite au partage \"{{folder}}\".",
    "{%device%} wants to share folder \"{%folderlabel%}\" ({%folder%}).": "{{device}} vous invite au partage \"{{folderlabel}}\" ({{folder}})."
--- a/Show More
+++ b/Show More