Engine.PeerForIP was pure delegation to the callback that LocalBackend
installs via SetPeerForIPFunc, so external callers going through the
engine were taking a pointless round trip: LocalBackend called
b.e.PeerForIP, which called right back into LocalBackend, and the
netstack UseNetstackForIP hooks in tsnet and tailscaled did the same
dance one layer removed.
Export LocalBackend.PeerForIP and make those callers use it directly.
The engine-internal cold paths (Ping, TSMP disco advertisements,
pendopen diagnostics) still need the lookup and have no netmap of
their own, so SetPeerForIPFunc stays on the interface, but the lookup
method itself is now unexported and gone from the Engine interface.
In tailscaled the UseNetstackForIP hook moves from netstack setup to
just after the LocalBackend is created, since the backend doesn't
exist yet when netstack is wired up.
Updates #12542
Change-Id: Ib1e1a4fa5c84ee0dcb9ce5d1910047f2bab9453c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Give nodeBackend a RouteManager and keep it in sync as routing
inputs change: full netmaps resync the whole peer set (removals plus
no-op-cheap upserts), incremental netmap deltas mirror their peer
upserts and removes into the same mutation batch, and
authReconfigLocked pushes the routing-relevant prefs (exit node,
subnet route acceptance, OneCGNAT) after resolving the exit node's
stable ID to its current numeric node ID.
A selected exit node that doesn't resolve to a current peer (a
nonexistent node, or MDM's "auto:any" placeholder awaiting
resolution) is not the same as no exit node: per the long-standing
ipn.Prefs.ExitNodeID contract, it blackholes internet traffic rather
than letting it escape to the local network. RouteManager's Prefs
gains an ExitNodeSelected bit so its OS route set keeps the default
routes in that case, with no outbound peer to carry them, matching
what routerConfigLocked does today, as pinned by TestRouterConfigExitNodeBlackhole in the previous commit.
All mutations happen with nodeBackend.mu held, satisfying the
RouteManager's serialized Begin/Commit contract.
Nothing consumes its snapshots yet; the wgengine data plane and OS
router wiring come next.
Updates #12542
Change-Id: I677b6b2c9efb8e41b3d27071bd9db73e01640d3b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Like the earlier RemoteConfig change, gate Hostinfo.AllowsUpdate on
feature.IsRegistered("clientupdate") in addition to the
buildfeatures.HasClientUpdate build-tag const. tsnet binaries don't
import feature/clientupdate even though ts_omit_clientupdate isn't
set, so they shouldn't tell control they can be remotely updated.
Add the previously missing feature.Register call to
feature/clientupdate, document the binary-support requirement on
tailcfg.Hostinfo.AllowsUpdate, and make tsnet's dep test verify it
doesn't depend on feature/clientupdate.
Updates #12614
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: I526ef11f2a4141f5fce161b1f77263324014b5c4
wgcfg.Config.NetworkLogging carried the network flow logging identity
inside the WireGuard config, where it was unrelated to WireGuard; it
lived there mainly so that identity changes would defeat Reconfig's
ErrNoChanges check and reach the netlog startup/shutdown logic.
Remove the field and move the whole netlog lifecycle into a new
feature/netlog package, installed on the engine via the new
wgengine.HookNewNetLogger hook, like other feature/* packages. The
logging identity now comes from LocalBackend's current netmap via the
widened NetLogSource interface (replacing Engine.SetNetLogNodeSource),
so nmcfg no longer parses audit log IDs into the config. The engine
still calls the hook before its ErrNoChanges return and before
router.Set (to capture initial packets), and again after router.Set
(to capture final packets), preserving the previous ordering.
Core wgengine no longer imports wgengine/netlog, so minimal builds
drop it entirely. tailscaled keeps netlog via feature/condregister,
and tsnet imports feature/condregister/netlog explicitly to keep
netlog enabled by default in tsnet-based binaries (tsidp,
k8s-operator).
This is pulled out of a future change that removes wgcfg.Config.Peers,
to make that PR smaller.
Updates #12542
Updates #12614
Change-Id: I41ca7dfe43c51e977c41b5f8e934bd1f0e6e6e24
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
* ipn/localapi,ipnlocal,feature/acme,client/local: honour Retry-After on cert rate-limit
serveCert now responds with 429 + Retry-After when the underlying ACME
error is a rate limit, instead of a generic 500. client/local surfaces
this as a typed RateLimitedError with the parsed hint so callers can
back off intelligently.
Updates tailscale/corp#42164
Signed-off-by: chaosinthecrd <tom@tmlabs.co.uk>
* tsweb,feature/acme,ipn/localapi,ipnlocal: generalise cert error → HTTP mapping via tsweb.HTTPStatuser
Introduces a tsweb.HTTPStatuser interface, any error can implement
to describe its intended HTTP response (code, message, headers).
Moves CertRateLimitedError from ipnlocal to feature/acme where it's
constructed, and it now uses HTTPStatuser to return 429 + Retry-After.
serveCert now checks for tsweb.HTTPStatuser rather than the specific
error type, so it no longer needs to know about the ACME rate-limit
type.
Signed-off-by: chaosinthecrd <tom@tmlabs.co.uk>
---------
Signed-off-by: chaosinthecrd <tom@tmlabs.co.uk>
Add a new Prefs.RemoteConfig bool. When true, a c2n endpoint at
/remoteapi/localapi/* proxies into this node's LocalAPI at
/localapi/* with full read/write permission, giving the tailnet
admin the same API surface a local root/admin user has via the
tailscale CLI. All LocalAPI versions (v0, v1, ...) proxy through.
RemoteConfig is an alternative to Tailscale's default per-feature
double opt-in, in which both the tailnet admin and the local machine
owner must consent to each individual setting change. It is a single
client-side "I trust the tailnet admin" switch that, once on, hands
over full remote management of this node's settings and LocalAPI
without any further local prompt or confirmation.
This is only appropriate when the tailnet admin already owns the
machine (e.g. a corporate fleet device) or the local user has
explicitly delegated full control. It should never be enabled on a
personal/BYOD device with an untrusted tailnet admin. The trust
model is documented on the pref, on the hidden --remote-config CLI
flag, and on the feature/remoteconfig package.
The node advertises its RemoteConfig state to the control plane via
a new Hostinfo.RemoteConfig bool. This is only true when the feature
is both compiled in (buildfeatures.HasRemoteConfig) and its init
actually ran (feature.IsRegistered("remoteconfig")); tsnet builds
have the former but not the latter and correctly report false.
The handler lives in feature/remoteconfig and can be omitted with the
ts_omit_remoteconfig build tag. tsnet's TestDeps guards against
accidentally pulling it in.
Updates tailscale/corp#18043
Change-Id: I72ce10a90a0e4e738c72c940af3af64c986160b2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Now that the routecheck subsystem is continuously collecting
reachability reports in the background, we can add a hook to
LocalBackend for fetching its report. That allows
suggestExitNodeUsingTrafficSteering to consult that report when
disqualifying candidates, instead of blocking on an immediate probe.
Exit node suggestions will only consult the report when the
`client-side-reachability` and `client-side-reachability-routecheck`
node attributes are both set on the current node.
Updates #17366
Updates tailscale/corp#33033
Signed-off-by: Simon Law <sfllaw@tailscale.com>
Tailscaled had no way to seed device-scope syspolicy settings short of
environment variables or a custom store wired up out of tree. Add a
--syspolicy-file flag whose default points at a well-known JSON file
that, when present, is parsed as a map[string]any and registered as a
device-scope policy source. The default path is
/etc/tailscale/syspolicy.json on every non-Windows platform (Linux, the
BSDs, illumos/Solaris, and tailscaled-without-the-GUI on macOS) and
%ProgramData%\Tailscale\syspolicy.json on Windows. The flag lets users
running tailscaled by hand (development, custom installs) point it at
an alternate file, and "" disables the load entirely.
JSON values map to setting types as expected: strings to
StringValue/PreferenceOptionValue/VisibilityValue/DurationValue (e.g.
"24h" parsed by time.ParseDuration), booleans to BooleanValue, numbers
to IntegerValue, and string arrays to StringListValue. The file is
validated against the registered setting definitions at load time so
unknown keys and value/type mismatches fail startup loudly rather than
producing surprising defaults at first read.
When HuJSON support is linked into the build (default; opt out with
ts_omit_hujsonconf), the file may use HuJSON (comments, trailing
commas). With ts_omit_hujsonconf it must be pure standard JSON. This
mirrors the pattern used by ipn/conffile.
On Windows the JSON file and the existing HKLM registry store both
register at DeviceScope. rsop merges later-registered same-scope
sources over earlier ones, so per-key values in the file override the
registry while keys absent from the file fall back to the registry.
The loader is registered via a feature.Hook from a file gated by
!ts_omit_syspolicy, and called from main after flag parsing. tsnet
still does not depend on the root syspolicy package, so embedders
don't pick this up implicitly.
Fixes#20305
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: Ie6326461c14efb226979ac162998a9c6373ce493
f5eac39ea ("feature/acme, ipn/ipnlocal: start moving ACME/cert state
into an extension") started to move the cert code into feature/acme
but was meant as a baby step.
This goes further, moving almost everything, leaving only some hooks
in ipnlocal.
When we later move "serve" support out to feature/serve, this will
look a bit different in that the hooks currently in ipnlocal will move
to feature/serve (cert support already depends on serve).
As part of this, cert-related tests move to feaure/acme too, which
means some test infra from ipnlocal now moves to shared ipnlocaltest.
(it's not big at the moment, but I imagine it growing)
Updates #12614
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: I9ea89aa9754f12d54b81751b6bd830f2664241ff
This was missing in the earlier f5eac39ea7 and meant that tsnet users weren't
getting (all of) acme support.
Thanks to @ChaosInTheCRD and @BeckyPauley for debugging.
Updates #12614
Updates #20252
Change-Id: I176a7b179b2ad3726aca484057f0aae7cc3561c8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Move all the FooForTest methods on LocalBackend to instead be
methods on a new unexported forTest type which is then given out
to callers in other packages via an exported ForTest method
(panicking in non-test contexts) that returns that unexported type.
This is unusual style (exported returning unexported) but declutters
godoc and makes call sites both more explicit and easier to read
without the "ForTest" suffix polluting the symbols. Now FooForTest()
changes into ForTest().Foo().
This was motivated by a pending change moving a bunch of code out of
LocalBackend into other packages that required adding more ForTest
methods to LocalBackend to keep the tests (now in other packages)
working. Instead, do this refactor now so the future change is prettier.
Updates #12614
Updates #cleanup
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: Ib25e6d76d48dc8622ac3a955e0b1220d582e63a8
prometheus/common v0.66/v0.67 introduced a mandatory
model.ValidationScheme on expfmt.TextParser as part of
prepping for UTF-8 metric/label names in Prometheus 3.0. The
zero value is intentionally UnsetValidation, which panics on
the first call to IsValidMetricName / IsValidLabelName with
Invalid name validation scheme requested: unset
so the long-standing "var parser expfmt.TextParser" pattern
crashes at runtime. Several big downstreams have hit the same
sharp edge:
https://github.com/thanos-io/thanos/issues/8823https://github.com/grafana/loki/pull/21401
Switch our two callers (parseMetrics in tsnet's
TestUserMetricsByteCounters and the client-metrics scraper in
tstest/natlab/vmtest) to the new expfmt.NewTextParser
constructor with model.LegacyValidation. LegacyValidation
matches the classic ASCII metric/label naming rules that
tailscaled's exporter uses today; if and when we ever emit a
metric with a UTF-8 name, we can revisit.
Goes to v0.69.0 (the latest at the time of writing) rather
than v0.67.5 so we pick up the unrelated security fixes for
cross-host redirects.
Done in advance so a follow-up change can pull in
github.com/tailscale/policybottest (which depends on
palantir/policy-bot, which transitively requires
prometheus/common at v0.67+) without dragging this debugging
into that PR.
Updates tailscale/corp#13972
Change-Id: I4b37db9ad3bebef1a32d9020bf6f8790bab25336
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
updates tailscale/corp#44019
WebClient is very useful for remote management
on tvOS (which cannot do ssh). Let's include it there.
Minimal corresponding tailscale/corp changes to follow
to add UI to set the required prefs.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
* Revert "control/controlclient: continue map poll during key expiry to receive extensions"
This reverts commit 6a822dcc36. This commit
has caused test failures in the corp repo by unexpected changing the login
behaviour when nodes have a valid node key.
Updates tailscale/corp#43705
Updates #19326
Signed-off-by: Alex Chan <alexc@tailscale.com>
* Revert "tsnet: test key extension after server restart"
This reverts commit 317201375f. This test
relies on changes in 317201375f, which is
also being reverted because it causes test failures in corp.
Updates tailscale/corp#43705
Updates #19326
Signed-off-by: Alex Chan <alexc@tailscale.com>
---------
Signed-off-by: Alex Chan <alexc@tailscale.com>
tsdial.Dialer.SetNetMap rebuilt an O(n peers) map of MagicDNS names on
every netmap change. As we move toward per-peer incremental deltas,
this becomes quadratic. This removes it and replaces it with
SetResolveMagicDNS, a callback into LocalBackend that looks up
hostnames from nodeBackend's new nodeByName index (populated alongside
nodeByAddr/nodeByKey on both full and delta paths). The index stores
both FQDNs and short names as keys.
This is the same treatment applied to netlog (8f210454d), wglog
(988b0905b), and drive (1d6989408): stop pushing *netmap.NetworkMap
into subsystems and instead have them pull from LocalBackend's live
data via callbacks.
Updates #12542
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: I24557ab0c8a27636e08e4779bcfd3ec633db0a78
Another baby step toward removing slices of peers from the engine.
getStatus iterated peerSequence (a key snapshot built in Reconfig
from cfg.Peers) and then asked wgdev for each peer's stats; peers
that weren't active in wgdev silently fell out. Iterate active wgdev
peers directly via RemoveMatchingPeers(returnFalse) instead.
Updates #12542
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: I3abd348abc30db706db29b3a785179259e48abda
aa5da2e5f2 (in the 1.99.x dev series, unstable) introduced some bugs,
only some of which were later fixed. This fixed another. As of that
change, tkaFilterNetmapLocked ran only on full netmaps through
LocalBackend.setClientStatusLocked and not peer upserts via new or
changed peers. The later ae743642d9 fixed a regression in the
Engine layer but didn't fix the tkaFilter code from re-running on
upserts.
This add a tkaFilterDeltaMutsLocked pass before
nodeBackend.UpdateNetmapDelta. For each NodeMutationUpsert whose
peer fails the same signature check tkaFilterNetmapLocked applies,
rewrite the upsert in place into a NodeMutationRemove targeting the
same node ID, so magicsock's per-mutation dispatch and
nodeBackend.peers both drop the peer, matching the prior full-netmap
semantics.
New tsnet tests added:
- TestTailnetLockFiltersUnsignedDeltaPeer covers the new-peer
case.
- TestTailnetLockFiltersUnsignedDeltaPeerReplacement covers the
existing-peer-replacement case, to an empty signature.
- TestTailnetLockFiltersDeltaPeerWithInvalidSignature like above
but with a bogus signature.
Updates #12542
Updates tailscale/corp#43767
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: Ib35d0391541fee654867c26489847dbc5b7e2ae8
Outbound packets produced by netstack (used by tailscaled with
--tun userspace-networking, by tsnet, and by the SOCKS5/HTTP proxies)
enter the wrapper via InjectOutbound{,PacketBuffer} and take the
injectedRead path, which bypasses Filter.RunOut.
RunOut's side effect for UDP/SCTP is to insert the reverse-flow tuple
into the connection-tracking LRU so that Filter.RunIn admits inbound
replies that no explicit ACL rule covers. Skipping it on the injected
path meant a netstack-side dial of UDP would send fine but the reply
would be dropped as "no matching rule". The kernel-TUN path was
already fine because it goes through RunOut.
Fixes#14229Fixes#20064
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: I816ef55c493a12ff4f561cd89c095559b5c2743b
When recommending an exit node, suggestExitNodeLocked ranks candidates by
the latency to their home DERP region, taken from the most recent netcheck
report. But netcheck alternates between full reports, which probe every
region, and incremental reports, which only re-probe the home region and a
handful of the fastest regions. When the most recent report is incremental,
the suggestion fell back to a random for exit nodes that are far away.
Now we rank candidates against the best recent latency, tracked by the
`netcheck.Client` - the same data that is used to pick the preferred
DERP. It uses a history of measurements which includes a full netcheck
report, so should cover all DERP regions.
Updates tailscale/corp#17516
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
The Logger previously took a *netmap.NetworkMap at Startup and on every
ReconfigNetworkMap call, denormalizing it into per-IP and self lookup
maps. That denormalization is O(n) over all peers and ran on every
netmap update, contributing to the broader quadratic behavior we want
to eliminate when a single peer is added or removed.
Instead, this makes netlog ask LocalBackend (well, nodeBackend) for
the info it needs, letting us remove the netmap.NetworkMap type
entirely from the netlog package.
This is a dependency to removing the netmap.NetworkMap type from
upstream callers, like wgengine.Engine in general.
Updates #12542
Change-Id: Ib5f2de96e788a667332c0a6f7ac833b3d0053b5c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In PR #17809, @bradfitz tried to fix tsnet_test.TestConn by making the
second tailscaled start after the first was fully set up. On slow
runners, the Ping for connectivity to the second server would race
against that server establishing a connection with its DERP home. If
the Ping arrived too soon, the DERP server would respond with
PeerGoneNotHome and the Ping would wait for its full timeout before
failing the test.
This patch introduces waitForHomeDERPConnected and makes startServer
block until the server’s home DERP has established its connection.
This patch also reduces the Ping timeout to 10 seconds for the tsnet
tests, which should be enough that a hung Ping is fast enough for
interactive debugging, but with enough headroom for a RekeyTimeout.
Fixes#12766
Signed-off-by: Simon Law <sfllaw@tailscale.com>
util/def: add def.Bool and def.Duration default parse helpers
Replace multiple instances of def.Bool and def.Duration with a new util/def
package.
Updates #20018
Co-authored-by: Bobby <boby@codelabs.co.id>
Co-authored-by: Simon Law <sfllaw@tailscale.com>
Signed-off-by: Bobby <boby@codelabs.co.id>
Signed-off-by: Simon Law <sfllaw@tailscale.com>
The earlier aa5da2e5f2 made peer adds and removes through a netmap
delta path that mutates only nodeBackend, on the assumption that
PeerForIP, lookupPeerByIP, the engine's wireguard config
(e.lastCfgFull), the engine BART, wgdev's PeerLookupFunc closure, and
the engine's cached netmap (e.netMap) would all stay correct without
further updates. They don't. I'd totally forgotten that
Engine.PeerForIP has its own alternate IP-to-peer lookup codepath.
Concretely, all of these failed for a peer that arrived via
[tailcfg.MapResponse.PeersChanged] (and never via a full
[tailcfg.MapResponse.Peers] list):
- [wgengine.Engine.PeerForIP] read from e.netMap and e.lastCfgFull
(neither updated on the delta path) and so missed the new
peer. The rando non-data-plane callers (Ping, TSMP, pendopen,
debug endpoints, tsdial.Dialer.UseNetstackForIP for tsnet and
onlyNetstack tailscaled) all returned "no matching peer".
- The engine BART (built from e.lastCfgFull) missed the new peer's
subnet routes / exit-node default routes.
- wgdev's [device.PeerLookupFunc] closure (rebuilt only inside
wgcfg.ReconfigDevice) didn't have the new peer's noise key, so
outbound encryption to the new peer dropped the packet even when
SetPeerByIPPacketFunc returned the right NodePublic.
- And nothing in the delta path triggered NodeMutationRemove to
flow through to authReconfig either, so the same stale state
pointed at removed peers indefinitely.
So just (functionally) revert it for now, to have something easily
cherry-pickable to the 1.100 release branch. Proper fixes can come later
for the next release.
This also adds three new tests:
- TestPingPeerLearnedViaDelta runs disco and TSMP subtests over a
delta-added peer with only self addresses. disco exercises the
cold PeerForIP path (magicsock); TSMP exercises the full data path
through wgdev encryption. Both fail without this fix.
- TestPingSubnetRouteOfDeltaPeer exercises a subnet-router peer
arriving via delta. With s1 in --accept-routes mode, an IP
inside the advertised CIDR must resolve to s2 and a TSMP ping
must round-trip. Hits the BART + lastCfgFull + wgdev staleness
in one go.
- TestPingSelfReturnsIsLocalIP is a regression guard for the
IsSelf early-out in Engine.Ping. Passes on main today; included
here so future refactors of PeerForIP can't regress self
handling without test breakage.
Updates tailscale/corp#43394
Change-Id: I7a049271359bd73e7147ae9e2554e85614c2b8d2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
tsnet depends on logpolicy, which in turn depended on util/syspolicy
because of a single LogTarget policy setting it uses.
In this commit, we replace that dependency with a feature.Hook,
which only tailscaled or its platform-specific alternatives should set.
Updates #20031
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Introduce a new `tailscale routecheck` command which prints a report
of high-availability routers that are reachable.
This command rhymes with the `tailscale netcheck` command and but
instead of reporting on local network conditions, `routecheck` reports
on remote connectivity.
Updates #17366
Updates tailscale/corp#33033
Signed-off-by: Simon Law <sfllaw@tailscale.com>
In order to support a `tailscale routecheck` command, we introduce the
`/localapi/v0/routecheck` endpoint to the local API. This endpoint
returns the most recent report collected by the routecheck client.
If `force=true` is an argument in the query string, then this endpoint
will actively probe before returning the report.
Updates #17366
Updates tailscale/corp#33033
Signed-off-by: Simon Law <sfllaw@tailscale.com>
This adds tsnet.Server.ListenSSH which, if the SSH feature is linked,
returns a net.Listener whose Accept yields *tailssh.Session values (as
net.Conn). This lets tsnet apps accept incoming SSH connections to
implement custom TUI applications.
Basic apps can use net.Conn directly (Read/Write/Close). Rich apps
import ssh/tailssh and type-assert for peer identity, PTY, signals,
etc. If feature/ssh isn't imported, ListenSSH returns an error.
Includes a demo guess-the-number game in tsnet/example/ssh-game.
Updates tailscale/corp#37839
Change-Id: I4e7c3c96afb030cdf4da8f2d8b2253820628129a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
If we dispatch a ping too early (after a later patch removes a 250ms
blockage) then the ping may be lost due to the peers not yet knowing
about each other. The ping is retained in order to setup and ensure a
wireguard session prior to test flow.
Updates #19822
Change-Id: I6cfea28931646a9387b6ffc2654e72cd846f4e55
Signed-off-by: James Tucker <james@tailscale.com>
Co-authored-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Previously, sharding required tests to opt in by calling tstest.Shard,
which used a process-global counter to assign each test to a shard.
This had two problems: most tests didn't call it, so they ran on every
shard (defeating the purpose), and shard assignments were unstable
(depended on call order, so adding a test could reshuffle others).
Remove tstest.Shard and tstest.SkipOnUnshardedCI entirely. Instead,
have testwrapper implement sharding automatically for all tests: when
TS_TEST_SHARD=N/M is set, it uses "go list -json" (no compilation) to
find test source files, scans them for top-level Test/Benchmark/
Example/Fuzz function names, and filters by fnv32a(name) % M == N-1.
The filtered names are passed as an anchored -run regex to go test.
Using go list instead of "go test -list" avoids linking the test binary
twice (Go's build cache does not cache test binary linking).
Fixes#19886
Change-Id: I62ab7b3d757324d4c5fd0b5de50c1e3742681791
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In PR tailscale/corp#30448, we originally decided to break ties using
SHA256 for our rendezvous hashing algorithm. Now that we’ve had some
experience with it, we think that FNV-1a is a better choice. It
distributes bits evenly, it’s much faster, and it doesn’t need to be
cryptographically secure. The FNV designers recommend FNV-1a over the
deprecated FNV-1.
This PR makes the switch and updates the related tests, since changing
the algorithm changes which stable pick gets selected. As of 2026-05,
this is the best time to make this change, since there are almost no
clients in the wild with traffic steering enabled.
Updates #17366
Updates tailscale/corp#29964
Updates tailscale/corp#29966
Updates tailscale/corp#33033
Signed-off-by: Simon Law <sfllaw@tailscale.com>
For large tailnets (~50k+ nodes) with frequent peer churn (ephemeral
GitHub Actions workers etc.), tailscaled used to rebuild the full
netmap and fan it out on the IPN bus on every MapResponse that
added or removed a peer. There were two O(N) costs per delta: the
full netmap rebuild + every Notify.NetMap encode to every bus watcher.
This change tackles both:
1. Plumb O(1) peer add/remove through the delta path. PeersChanged
and PeersRemoved no longer prevent the delta happy path; instead,
they mutate the per-node-backend peer map in place.
2. Restrict ipn.Notify.NetMap emission to the platforms whose host
GUIs still depend on it (Windows, macOS, iOS) and migrate
in-tree consumers off it everywhere else:
- Migrate reactive consumers (containerboot, kube agents,
sniproxy, tsconsensus, etc.) off Notify.NetMap to the
previously-added Notify.SelfChange signal so they no longer
have to subscribe to the full netmap.
- Add ipn.NotifyNoNetMap so GUI clients on "legacy-emit" platforms
that have already migrated can opt out of the per-watcher
NetMap encode.
- Gate Notify.NetMap emission on the producer side by a compile-
time GOOS check, so the supporting code is dead-code-eliminated
on Linux and other geese where no GUI consumer needs it.
Re-running BenchmarkGiantTailnet from tstest/largetailnet, which was
added along with baseline numbers on unmodified main in ad5436af0d,
the per-delta cost (one peer add+remove pair) is now ~O(1) regardless
of tailnet size N:
N no-watcher (ms/op) bus-watcher (ms/op)
before now factor before now factor
10000 32 0.11 300x 166 0.13 1300x
50000 222 0.11 2000x 865 0.13 6700x
100000 504 0.12 4100x 1765 0.13 13400x
250000 1551 0.12 12500x 4696 0.15 32400x
Updates #12542
Change-Id: I94e34b37331d1a8ec74c299deffadf4d061fda9e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The traffic package contains helpers for evaluating traffic steering
scores and picking appropriate nodes. These were extracted from
ipnlocal.suggestExitNodeUsingTrafficSteering so they can be reused by
the new routecheck package to probe exit nodes in priority order.
Updates #17366
Updates tailscale/corp#33033
Signed-off-by: Simon Law <sfllaw@tailscale.com>
The tailscale.com/wif package brings in the AWS SDK
(github.com/aws/aws-sdk-go-v2/{config,sts,...} and github.com/aws/smithy-go)
to support fetching ID tokens from AWS IMDS for workload identity
federation. Until now, tsnet pulled this in unconditionally via
feature/condregister/identityfederation, costing ~70 unwanted deps for
every tsnet program whether or not it uses workload identity federation.
These AWS SDK deps were originally removed from tsnet on 2025-09-29 by
commit 69c79cb9f ("ipn/store, feature/condregister: move AWS + Kube
store registration to condregister"). They were then accidentally added
back on 2026-01-14 by commit 6a6aa805d ("cmd,feature: add identity
token auto generation for workload identity", PR #18373) when the new
wif package was wired into tsnet via feature/identityfederation.
Drop the blanket import. tsnet programs that want workload identity
federation now opt in with:
import _ "tailscale.com/feature/identityfederation"
The hook lookup in resolveAuthKey already uses GetOk and degrades
gracefully when the feature isn't linked, so existing programs that
don't use workload identity federation see no behavior change. The
tailscale CLI still imports the condregister wrapper directly, so its
behavior is also unchanged.
Lock this in with TestDeps additions: tailscale.com/wif as a BadDep,
plus substring checks in OnDep that fail on any github.com/aws/ or
k8s.io/ dependency creeping back in.
Also, switch cmd/gitops-pusher from the condregister wrapper to a
direct import of feature/identityfederation: gitops-pusher's auth flow
calls HookExchangeJWTForTokenViaWIF directly, so it shouldn't be
subject to the ts_omit_identityfederation build tag.
Updates #12614
Change-Id: I70599f2bdd4d3666b26a859d5b76caa5d6b94507
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Commit 69c79cb9f (Sep 2025) moved awsstore and kubestore registration
behind condregister build tags so tsnet wouldn't pull in the AWS SDK
and Kubernetes client by default. The accompanying TestDeps BadDeps
entry was missed, so PR #19667 (which re-added those imports) wasn't
caught by the test.
Add the two packages to BadDeps so future regressions fail the test.
Updates #19667
Updates #12614
Change-Id: I903b7c976e5e122cc0c0b956dc73740f5d474fac
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
There are only a couple endpoints that check peer capabilities. Keeping
permission checks with the code that assumes they were performed, rather
than with the routing layer, feels easier to reason about.
Check that the caller is actually a peer and pass their capabilities via
a context value for handlers that want to check them.
Along with this, simplify the helper handler wrappers that are not
needed for most of the endpoints.
Updates #40851
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Add two narrower accessors alongside the existing
[LocalBackend.NetMap], with docs that distinguish their semantics:
- NetMapNoPeers: cheap (returns the cached *netmap.NetworkMap with
a possibly-stale Peers slice). For callers that only read non-Peers
fields like SelfNode, DNS, PacketFilter, capabilities.
- NetMapWithPeers: documented as returning an up-to-date Peers slice.
For callers that genuinely need to iterate Peers or call
PeerByXxx.
Mark the existing NetMap deprecated and point readers at the two new
accessors. NetMap, NetMapNoPeers, and NetMapWithPeers all currently
return the same value (b.currentNode().NetMap()): this commit is a
no-op behaviorally, just a renaming and migration of in-tree callers.
A subsequent change in the same series will switch
NetMapWithPeers to actually rebuild the Peers slice from the live
per-node-backend peers map (O(N) per call), at which point the
distinction between the two new accessors becomes load-bearing.
Migrate in-tree callers to the appropriate accessor based on what
fields they read:
- NetMapNoPeers (most common): localapi handlers, peerapi accept,
GetCertPEMWithValidity, web client noise request, doctor DNS
resolver check, tsnet CertDomains/TailscaleIPs, ssh/tailssh
SSH-policy/cap reads, several LocalBackend internals
(isLocalIP, allowExitNodeDNSProxyToServeName, pauseForNetwork
nil-check, serve config).
- NetMapWithPeers: writeNetmapToDiskLocked (persist full netmap to
disk for fast restart), PeerByTailscaleIP lookup.
Tests still call the legacy NetMap; they'll see the deprecation
warning but otherwise behave identically.
Also add two pieces of plumbing the next change in this series will
need, but which are already useful on their own:
- [client/local.GetDebugResultJSON]: a generic [Client.DebugResultJSON]
that decodes directly into a target type T, avoiding the
marshal/unmarshal roundtrip callers otherwise need.
- localapi "current-netmap" debug action: returns the current
netmap (with peers) as JSON. Documented as debug-only — the
netmap.NetworkMap shape is internal and may change without notice.
This commit is part of a series breaking up a larger change for
review; on its own it is a no-op refactor.
Updates #12542
Change-Id: Idbb30707414f8da3149c44ca0273262708375b02
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Add a Go benchmark that exercises a single tailnet client (a [tsnet.Server]
running in the test process) against a synthetic large initial netmap and
a stream of caller-driven peer add/remove deltas, all in-process.
The harness is split in two parts:
- tstest/largetailnet, a reusable package containing a [Streamer]
that hijacks the map long-poll on a [testcontrol.Server] via the new
AltMapStream hook, sends one initial MapResponse with N synthetic
peers, and forwards caller-supplied delta MapResponses on the same
stream. Helpers like MakePeer / AllocPeer build synthetic peers with
unique IDs and addresses derived from the Tailscale ULA range.
- tstest/largetailnet/largetailnet_test.go, BenchmarkGiantTailnet
(headless tailscaled workload, no IPN bus subscriber) and
BenchmarkGiantTailnetBusWatcher (GUI-client workload with one
Notify subscriber attached). Both are gated on
--actually-test-giant-tailnet (skipped by default), stand up an
in-process testcontrol + tsnet.Server, let Up block until the
initial N-peer netmap has been processed, then ResetTimer and run
add+remove pairs via b.Loop. Per-delta sync is via a test-only
[ipnlocal.LocalBackend.AwaitNodeKeyForTest] channel that closes
once the just-added peer key appears in the netmap (no-watcher
variant) or via bus-Notify drain (bus-watcher variant).
To support the hijack, [testcontrol.Server] grows an AltMapStream hook
and a small MapStreamWriter interface for benchmarks/stress tests that
need to drive a controlled MapResponse sequence; the normal serveMap
path is untouched when AltMapStream is nil. The streamer answers
non-streaming "lite" map polls (which controlclient issues before the
streaming long-poll to push HostInfo) with an empty MapResponse and
returns immediately, so the streaming poll that follows is the one
that gets the initial netmap.
The benchmark is intended for before/after comparisons of netmap- and
delta-handling changes targeted at large tailnets. CPU profiles on
unmodified main show the expected O(N) hotspots:
setControlClientStatusLocked / authReconfigLocked /
userspaceEngine.Reconfig / setNetMapLocked, plus JSON encoding of the
full Notify.NetMap to bus watchers (which dominates the BusWatcher
variant).
Median ms/op over 10 runs on unmodified main, by tailnet size N:
N no-watcher bus-watcher
10000 32 166
50000 222 865
100000 504 1765
250000 1551 4696
Recommended invocation:
go test ./tstest/largetailnet/ -run=^$ \
-bench='BenchmarkGiantTailnet(BusWatcher)?$' \
-benchtime=2000x -timeout=10m \
--actually-test-giant-tailnet \
--giant-tailnet-n=250000 \
-cpuprofile=/tmp/giant.cpu.pprof
Updates #12542
Change-Id: I4f5b2bb271a36ba853d5a0ffe82054ef2b15c585
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This drops an indirect dependency on the old github.com/docker/docker
(which was replaced with github.com/moby/moby) and fixes a couple recent
CVEs.
Updates #cleanup
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Adds a CI check to keep opted-in directories' README.md files in sync
with their package godoc. For now tsnet (and its sub-packages under
tsnet/example) is the only opted-in tree. The list of directories
lives in misc/genreadme/genreadme.go as defaultRoots, so CI and humans
both just run `./tool/go run ./misc/genreadme` with no arguments.
The check piggybacks on the existing go_generate job in test.yml and
fails if any README.md is out of date, pointing the user at the same
command.
Along the way:
- tempfork/pkgdoc now emits Markdown instead of plain text: headings
become level-2 with no {#hdr-...} anchors, and [Symbol] doc links
resolve to pkg.go.dev URLs, including for symbols in the current
package (which the default Printer would otherwise emit as bare
#Name fragments with no backing anchor in a README). Parsing no
longer uses parser.ImportsOnly, so doc.Package knows the package's
symbols and can resolve [Symbol] links at all.
- genreadme also emits a pkg.go.dev Go Reference badge at the top of
a library package's README; suppressed for package main.
- tsnet/tsnet.go's package godoc is expanded in idiomatic godoc
syntax — [Type], [Type.Method], reference-style [link]: URL
definitions — rather than Markdown-flavored [text](url) or
backtick-quoted identifiers, so that both pkg.go.dev and the
generated README.md render cleanly from a single source.
Fixes#19431Fixes#19483Fixes#19470
Change-Id: I8ca37e9e7b3bd446b8bfa7a91ac548f142688cb1
Co-authored-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Signed-off-by: Walter Poupore <walterp@tailscale.com>
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
fixestailscale/corp#39422
Updates tailscale/certstore for properly macOS support and
builds the request signing support into macOS builds. iOS and builds
that do not use cGo are omitted.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
Add ExtraRootCAs *x509.CertPool to tsd.System and plumb it through
the control client, noise transport, DERP, and wgengine layers so
that platforms like Android can inject user-installed CA certificates
into Go's TLS verification.
tlsdial.Config now honors base.RootCAs as additional trusted roots,
tried after system roots and before the baked-in LetsEncrypt fallback.
SetConfigExpectedCert gets the same treatment for domain-fronted DERP.
The Android client will set sys.ExtraRootCAs with a pool built from
x509.SystemCertPool + user-installed certs obtained via the Android
KeyStore API, replacing the current SSL_CERT_DIR environment variable
approach.
Updates #8085
Change-Id: Iecce0fd140cd5aa0331b124e55a7045e24d8e0c2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Add a new vet analyzer that checks t.Run subtest names don't contain
characters requiring quoting when re-running via "go test -run". This
enforces the style guide rule: don't use spaces or punctuation in
subtest names.
The analyzer flags:
- Direct t.Run calls with string literal names containing spaces,
regex metacharacters, quotes, or other problematic characters
- Table-driven t.Run(tt.name, ...) calls where tt ranges over a
slice/map literal with bad name field values
Also fix all 978 existing violations across 81 test files, replacing
spaces with hyphens and shortening long sentence-like names to concise
hyphenated forms.
Updates #19242
Change-Id: Ib0ad96a111bd8e764582d1d4902fe2599454ab65
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Prior to this change, closing multiple ServiceListeners concurrently
could result in failures as the independent close operations vie for the
attention of the Server's LocalBackend. The close operations would each
obtain the current ETag of the serve config and try to write new serve
config using this ETag. When one write invalidated the ETag of another,
the latter would fail. Exacerbating the issue, ServiceListener.Close
cannot be retried.
This change resolves the bug by using Server.mu to synchronize across
all ServiceListener.Close operations, ensuring they happen serially.
Fixes#19169
Signed-off-by: Harry Harpham <harry@tailscale.com>
This is a regression test for #19166, in which it was discovered that
after calling Server.ListenService for multiple Services, only the
Service from the most recent call would be advertised.
The bug was fixed in 99f8039101
Updates #19166
Signed-off-by: Harry Harpham <harry@tailscale.com>
AppendTo returns the new slice but the result was discarded,
so only the newly added service was advertised.
Signed-off-by: Evan Champion <110177090+evan314159@users.noreply.github.com>
