I omitted a lot of the min/max modernizers because they didn't
result in more clear code.
Some of it's older "for x := range 123".
Also: errors.AsType, any, fmt.Appendf, etc.
Updates #18682
Change-Id: I83a451577f33877f962766a5b65ce86f7696471c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This had gotten flaky with Go 1.26.
Use synctest + AllocsPerRun to make it fast and deterministic.
Updates #18682
Change-Id: If673d6ecd8c1177f59c1b9c0f3fca42309375dff
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This adds a new ControlKnob to make MagicDNS IPv6 registration
(telling systemd/etc) opt-out rather than opt-in.
Updates #15404
Change-Id: If008e1cb046b792c6aff7bb1d7c58638f7d650b1
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In the absence of a better mechanism, writing unqualified hostnames to the hosts file may be required
for MagicDNS to work on some Windows environments, such as domain-joined machines. It can also
improve MagicDNS performance on non-domain joined devices when we are not the device's primary
DNS resolver.
At the same time, updating the hosts file can be slow and expensive, especially when it already contains
many entries, as was previously reported in #14327. It may also have negative side effects, such as interfering
with the system's DNS resolution policies.
Additionally, to fix#18712, we had to extend hosts file usage to domain-joined machines when we are not
the primary DNS resolver. For the reasons above, this change may introduce risk.
To allow customers to disable hosts file updates remotely without disabling MagicDNS entirely, whether on
domain-joined machines or not, this PR introduces the `disable-hosts-file-updates` node attribute.
Updates #18712
Updates #14327
Signed-off-by: Nick Khyl <nickk@tailscale.com>
concurrent netmaps that if the first is logged in, it is never skipped.
This should have been covered be the skip test case, but that case
wasn't updated to include level set state.
Updates #12639
Updates #17869
Signed-off-by: James Tucker <james@tailscale.com>
This file was never truly necessary and has never actually been used in
the history of Tailscale's open source releases.
A Brief History of AUTHORS files
---
The AUTHORS file was a pattern developed at Google, originally for
Chromium, then adopted by Go and a bunch of other projects. The problem
was that Chromium originally had a copyright line only recognizing
Google as the copyright holder. Because Google (and most open source
projects) do not require copyright assignemnt for contributions, each
contributor maintains their copyright. Some large corporate contributors
then tried to add their own name to the copyright line in the LICENSE
file or in file headers. This quickly becomes unwieldy, and puts a
tremendous burden on anyone building on top of Chromium, since the
license requires that they keep all copyright lines intact.
The compromise was to create an AUTHORS file that would list all of the
copyright holders. The LICENSE file and source file headers would then
include that list by reference, listing the copyright holder as "The
Chromium Authors".
This also become cumbersome to simply keep the file up to date with a
high rate of new contributors. Plus it's not always obvious who the
copyright holder is. Sometimes it is the individual making the
contribution, but many times it may be their employer. There is no way
for the proejct maintainer to know.
Eventually, Google changed their policy to no longer recommend trying to
keep the AUTHORS file up to date proactively, and instead to only add to
it when requested: https://opensource.google/docs/releasing/authors.
They are also clear that:
> Adding contributors to the AUTHORS file is entirely within the
> project's discretion and has no implications for copyright ownership.
It was primarily added to appease a small number of large contributors
that insisted that they be recognized as copyright holders (which was
entirely their right to do). But it's not truly necessary, and not even
the most accurate way of identifying contributors and/or copyright
holders.
In practice, we've never added anyone to our AUTHORS file. It only lists
Tailscale, so it's not really serving any purpose. It also causes
confusion because Tailscalars put the "Tailscale Inc & AUTHORS" header
in other open source repos which don't actually have an AUTHORS file, so
it's ambiguous what that means.
Instead, we just acknowledge that the contributors to Tailscale (whoever
they are) are copyright holders for their individual contributions. We
also have the benefit of using the DCO (developercertificate.org) which
provides some additional certification of their right to make the
contribution.
The source file changes were purely mechanical with:
git ls-files | xargs sed -i -e 's/\(Tailscale Inc &\) AUTHORS/\1 contributors/g'
Updates #cleanup
Change-Id: Ia101a4a3005adb9118051b3416f5a64a4a45987d
Signed-off-by: Will Norris <will@tailscale.com>
And fix up the TestAutoUpdateDefaults integration tests as they
weren't testing reality: the DefaultAutoUpdate is supposed to only be
relevant on the first MapResponse in the stream, but the tests weren't
testing that. They were instead injecting a 2nd+ MapResponse.
This changes the test control server to add a hook to modify the first
map response, and then makes the test control when the node goes up
and down to make new map responses.
Also, the test now runs on macOS where the auto-update feature being
disabled would've previously t.Skipped the whole test.
Updates #11502
Change-Id: If2319bd1f71e108b57d79fe500b2acedbc76e1a6
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Adds the ability to rotate discovery keys on running clients, needed for
testing upcoming disco key distribution changes.
Introduces key.DiscoKey, an atomic container for a disco private key,
public key, and the public key's ShortString, replacing the prior
separate atomic fields.
magicsock.Conn has a new RotateDiscoKey method, and access to this is
provided via localapi and a CLI debug command.
Note that this implementation is primarily for testing as it stands, and
regular use should likely introduce an additional mechanism that allows
the old key to be used for some time, to provide a seamless key rotation
rather than one that invalidates all sessions.
Updates tailscale/corp#34037
Signed-off-by: James Tucker <james@tailscale.com>
Includes adding StartPaused, which will be used in a future change to
enable netmap caching testing.
Updates #12639
Change-Id: Iec39915d33b8d75e9b8315b281b1af2f5d13a44a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It's an unnecessary nuisance having it. We go out of our way to redact
it in so many places when we don't even need it there anyway.
Updates #12639
Change-Id: I5fc72e19e9cf36caeb42cf80ba430873f67167c3
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Remove the State enum (StateNew, StateNotAuthenticated, etc.) from
controlclient and replace it with two explicit boolean fields:
- LoginFinished: indicates successful authentication
- Synced: indicates we've received at least one netmap
This makes the state more composable and easier to reason about, as
multiple conditions can be true independently rather than being
encoded in a single enum value.
The State enum was originally intended as the state machine for the
whole client, but that abstraction moved to ipn.Backend long ago.
This change continues moving away from the legacy state machine by
representing state as a combination of independent facts.
Also adds test helpers in ipnlocal that check independent, observable
facts (hasValidNetMap, needsLogin, etc.) rather than relying on
derived state enums, making tests more robust.
Updates #12639
Signed-off-by: James Tucker <james@tailscale.com>
As a baby step towards eventbus-ifying controlclient, make the
Observer optional.
This also means callers that don't care (like this network lock test,
and some tests in other repos) can omit it, rather than passing in a
no-op one.
Updates #12639
Change-Id: Ibd776b45b4425c08db19405bc3172b238e87da4e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Temporarily back out the TPM-based hw attestation code while we debug
Windows exceptions.
Updates tailscale/corp#31269
Signed-off-by: Patrick O'Doherty <patrick@tailscale.com>
Extend Persist with AttestationKey to record a hardware-backed
attestation key for the node's identity.
Add a flag to tailscaled to allow users to control the use of
hardware-backed keys to bind node identity to individual machines.
Updates tailscale/corp#31269
Change-Id: Idcf40d730a448d85f07f1bebf387f086d4c58be3
Signed-off-by: Patrick O'Doherty <patrick@tailscale.com>
c2n was already a conditional feature, but it didn't have a
feature/c2n directory before (rather, it was using consts + DCE). This
adds it, and moves some code, which removes the httprec dependency.
Also, remove some unnecessary code from our httprec fork.
Updates #12614
Change-Id: I2fbe538e09794c517038e35a694a363312c426a2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In the earlier http2 package migration (1d93bdce20, #17394) I had
removed Direct.Close's tracking of the connPool, thinking it wasn't
necessary.
Some tests (in another repo) are strict and like it to tear down the
world and wait, to check for leaked goroutines. And they caught this
letting some goroutines idle past Close, even if they'd eventually
close down on their own.
This restores the connPool accounting and the aggressife close.
Updates #17305
Updates #17394
Change-Id: I5fed283a179ff7c3e2be104836bbe58b05130cc7
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
A recent change (009d702adf) introduced a deadlock where the
/machine/update-health network request to report the client's health
status update to the control plane was moved to being synchronous
within the eventbus's pump machinery.
I started to instead make the health reporting be async, but then we
realized in the three years since we added that, it's barely been used
and doesn't pay for itself, for how many HTTP requests it makes.
Instead, delete it all and replace it with a c2n handler, which
provides much more helpful information.
Fixestailscale/corp#32952
Change-Id: I9e8a5458269ebfdda1c752d7bbb8af2780d71b04
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Saves 262 KB so far. I'm sure I missed some places, but shotizam says
these were the low hanging fruit.
Updates #12614
Change-Id: Ia31c01b454f627e6d0470229aae4e19d615e45e3
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Maybe it matters? At least globally across all nodes?
Fixes#17343
Change-Id: I3f61758ea37de527e16602ec1a6e453d913b3195
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Saves 352 KB, removing one of our two HTTP/2 implementations linked
into the binary.
Fixes#17305
Updates #15015
Change-Id: I53a04b1f2687dca73c8541949465038b69aa6ade
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
A following change will split out the controlclient.NoiseClient type
out, away from the rest of the controlclient package which is
relatively dependency heavy.
A question was where to move it, and whether to make a new (a fifth!)
package in the ts2021 dependency chain.
@creachadair and I brainstormed and decided to merge
internal/noiseconn and controlclient.NoiseClient into one package,
with names ts2021.Conn and ts2021.Client.
For ease of reviewing the subsequent PR, this is the first step that
just renames the internal/noiseconn package to control/ts2021.
Updates #17305
Change-Id: Ib5ea162dc1d336c1d805bdd9548d1702dd6e1468
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The callback itself is not removed as it is used in other repos, making
it simpler for those to slowly transition to the eventbus.
Updates #15160
Signed-off-by: Claus Lensbøl <claus@tailscale.com>
It never launched and I've lost hope of it launching and it's in my
way now, so I guess it's time to say goodbye.
Updates tailscale/corp#4383
Updates #17305
Change-Id: I2eb551d49f2fb062979cc307f284df4b3dfa5956
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Saves 139 KB.
Also Synology support, which I saw had its own large-ish proxy parsing
support on Linux, but support for proxies without Synology proxy
support is reasonable, so I pulled that out as its own thing.
Updates #12614
Change-Id: I22de285a3def7be77fdcf23e2bec7c83c9655593
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Saves 328 KB (2.5%) off the minimal binary.
For IoT devices that don't need MagicDNS (e.g. they don't make
outbound connections), this provides a knob to disable all the DNS
functionality.
Rather than a massive refactor today, this uses constant false values
as a deadcode sledgehammer, guided by shotizam to find the largest DNS
functions which survived deadcode.
A future refactor could make it so that the net/dns/resolver and
publicdns packages don't even show up in the import graph (along with
their imports) but really it's already pretty good looking with just
these consts, so it's not at the top of my list to refactor it more
soon.
Also do the same in a few places with the ACME (cert) functionality,
as I saw those while searching for DNS stuff.
Updates #12614
Change-Id: I8e459f595c2fde68ca16503ff61c8ab339871f97
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It has nothing to do with logtail and is confusing named like that.
Updates #cleanup
Updates #17323
Change-Id: Idd34587ba186a2416725f72ffc4c5778b0b9db4a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Only changes how the go routine consuming the events starts and stops,
not what it does.
Updates #15160
Signed-off-by: Claus Lensbøl <claus@tailscale.com>
controlhttp has the responsibility of dialing a set of candidate control
endpoints in a way that minimizes user facing latency. If one control
endpoint is unavailable we promptly dial another, racing across the
dimensions of: IPv6, IPv4, port 80, and port 443, over multiple server
endpoints.
In the case that the top priority endpoint was not available, the prior
implementation would hang waiting for other results, so as to try to
return the highest priority successful connection to the rest of the
client code. This hang would take too long with a large dialplan and
sufficient client to endpoint latency as to cause the server to timeout
the connection due to inactivity in the intermediate state.
Instead of trying to prioritize non-ideal candidate connections, the
first successful connection is now used unconditionally, improving user
facing latency and avoiding any delays that would encroach on the
server-side timeout.
The tests are converted to memnet and synctest, running on all
platforms.
Fixes#8442Fixestailscale/corp#32534
Co-authored-by: James Tucker <james@tailscale.com>
Change-Id: I4eb57f046d8b40403220e40eb67a31c41adb3a38
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Signed-off-by: James Tucker <james@tailscale.com>
Pulls out the last callback logic and ensures timers are still running.
The eventbustest package is updated support the absence of events.
Updates #15160
Signed-off-by: Claus Lensbøl <claus@tailscale.com>
For debugging purposes, add a new C2N endpoint returning the current
netmap. Optionally, coordination server can send a new "candidate" map
response, which the client will generate a separate netmap for.
Coordination server can later compare two netmaps, detecting unexpected
changes to the client state.
Updates tailscale/corp#32095
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
Previously, seamless key renewal was an opt-in feature. Customers had
to set a `seamless-key-renewal` node attribute in their policy file.
This patch enables seamless key renewal by default for all clients.
It includes a `disable-seamless-key-renewal` node attribute we can set
in Control, so we can manage the rollout and disable the feature for
clients with known bugs. This new attribute makes the feature opt-out.
Updates tailscale/corp#31479
Signed-off-by: Alex Chan <alexc@tailscale.com>
