Add Catppuccin Latte (the light version) theme based on the existing Catppuccin Macchiato theme.
The palette and player styling are adapted for light mode while staying as close as practical
to the existing Macchiato theme behavior. I've opted to use gray for the
color for controls.
The dark version appears to mix a few control/accent colors,
so for Latte I standardized those choices. This might be worth looking
into in a separate PR. It uses gray and blue.
Signed-off-by: Love Billenius <lovebillenius@disroot.org>
Co-authored-by: Deluan Quintão <deluan@navidrome.org>
Signed-off-by: Deluan <deluan@navidrome.org>
* Add Moonbase theme
A warm dark theme with gold (#d4a039) accents on deep charcoal
backgrounds (#0a0a09/#141413). Features muted cream text (#e5ddd3),
copper error states (#c45c3c), and subtle earthy secondary tones.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* Fix review comments on Moonbase theme
- Fix CSS selector: use :not(.player-delete) instead of :not([class=".player-delete"])
- Fix MuiFormHelperText override structure: target error key directly
- Remove empty icon: {} and avatar: {} from NDLogin overrides
- Use comma-separated rgba syntax and hex for linear-gradient
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* Add Moonbase Alpha (light) and rename dark to Moonbase Bravo
Split the Moonbase theme into a complementary pair:
- Moonbase Alpha: warm cream/stone light theme with deep gold accents
- Moonbase Bravo: the original deep charcoal dark theme
Both share the same gold (#d4a039) brand accent, copper error states,
and earthy neutral palette. Alpha uses darkened gold (#9a7420) for
better contrast on light backgrounds.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Co-authored-by: Deluan Quintão <deluan@navidrome.org>
* fix(ui): update Spanish translations and add missing gain keys
- Add missing 'albumGain' and 'trackGain' keys (matches recent additions in pt-br, ru)
- Translate 'Playlists' and 'Shared Playlists' to 'Listas de reproducción' / '...compartidas'
- Translate 'OFFLINE' (server down indicator) to 'DESCONECTADO'
Spanish translation now covers 553/553 keys (was 551/553).
Signed-off-by: Daniel Banariba <banaribad@gmail.com>
* fix(ui): address review feedback on Spanish translations
- Use 'Ganancia del álbum' (with article 'del') for consistency with the existing pattern in line 624 ('album': 'Ganancia del álbum') and 'Artista del álbum'. Thanks @gemini-code-assist for the catch.
- Revert 'playlists' and 'sharedPlaylists' to keep the loanword 'Playlist(s)' which is the form actually used by Spanish-speaking music app users (Spotify ES, etc.) and matches existing usage elsewhere in this same file (e.g. line 48 'Agregar a la playlist').
Signed-off-by: Daniel Banariba <banaribad@gmail.com>
---------
Signed-off-by: Daniel Banariba <banaribad@gmail.com>
Co-authored-by: Deluan Quintão <deluan@navidrome.org>
* test: fix flaky tests in utils/cache
Two tests in the utils/cache suite were timing- and ordering-dependent
and failed intermittently on CI (notably on the Windows runner).
The FileHaunter tests raced the asynchronous cache-cleanup goroutine with
a fixed 400ms sleep, then asserted the directory state once. On slow
runners the haunter had not finished scrubbing, so the assertion saw the
original files and failed. Replace the fixed sleep with Eventually polling
so the assertions wait for the haunter to converge. While doing so, the
exact set and count of reaped files proved nondeterministic (the empty
file is double-counted in the size loop and LRU survivors depend on
OS access-time ordering), so the assertions now check the haunter's
actual guarantees: the empty file is always scrubbed and the cache stays
within the configured maxSize/maxItems bound. This also lets the
previously-disabled maxItems context and its commented-out assertions be
re-enabled.
The HTTPClient 'caches repeated requests' test relied on a shared
requestsReceived counter that was never reset in BeforeEach. Under
randomized spec order another spec could run first and leave the counter
non-zero, breaking the first assertion. Reset the counter and header in
BeforeEach to make the spec independent of execution order.
Verified with: ginkgo -race -repeat=80 --randomize-all ./utils/cache/
* test: surface errors in dirSize and align Eventually with house style
Address code review feedback on the cache flaky-test fix:
- dirSize now returns (uint64, error) and the maxSize spec asserts the
error is nil. Previously a ReadDir/Info failure silently returned 0,
which always satisfies '<= maxSize' and would mask a real filesystem
error as a passing test.
- dirSize skips non-regular entries (info.Mode().IsRegular()) to match
its doc comment and avoid counting directories or symlinks.
- The Eventually blocks now use .WithTimeout()/.WithPolling() with
time.Duration values instead of string-literal durations, matching the
prevailing pattern in the test suite.
Share repository read methods (Get, GetAll, Read, ReadAll, Exists, Count,
CountAll) did not apply an owner filter, so non-admin users saw shares
belonging to other users. The write paths already enforced per-user ownership;
this brings reads in line with them.
Add an addRestriction()/ownerFilter() based scope to share reads, keeping
admins and the headless public-share resolution path unrestricted. Route share
and player Delete through a new base-repo deleteOwned() primitive that applies
the ownership predicate in the DELETE's WHERE clause (atomic, no select-then-
delete window) and classifies a zero-row result as permission-denied vs
not-found, mirroring updateOwned. The addRestriction helper and the write-miss
classifier are hoisted onto the base repository so player and share share one
implementation.
Also map rest.ErrPermissionDenied and rest.ErrNotFound in the Subsonic error
handler so ownership/not-found failures from the rest-backed repositories
return the proper Subsonic codes (50 / 70) instead of a generic error.
Covered by unit tests (persistence, subsonic error mapping) and an end-to-end
cross-user sharing isolation test.
The native API exposes a `path` query param on /api/song, but it was not
registered in the media file filter map. Unmapped real columns fall through
to a default LIKE predicate that emits an unqualified `path LIKE ?`. Since
the song query joins the library table (which also has a `path` column),
SQLite returned "ambiguous column name: path" and the request failed with
HTTP 500.
Register a dedicated path filter qualified to media_file.path, resolving the
ambiguity. The value is matched with startsWith semantics (LIKE arg || '%')
against the library-relative path stored in media_file.path.
To register it inline (without a one-off wrapper), startsWithFilter now takes
a bound field and returns a filterFunc, mirroring containsFilter. The two
existing callers are updated accordingly, and the now-unused withTableName
helper is removed. The user 'name' filter, which previously relied on
withTableName, is now qualified directly as user.name; tests are added to
guard that filter against the same column-ambiguity class (the user query
also joins the library table, which has a name column).
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(security): restrict transcoding config reads to admins
Authenticated non-admin users could read transcoding configs through
the native API (GET /api/transcoding and /api/transcoding/{id}) when
EnableTranscodingConfig was enabled. The responses included the full
command templates, disclosing admin-configured ffmpeg invocations and
local command paths. Write operations were already admin-only.
The /transcoding route was registered in the general authenticated
group, and only the repository's write methods checked IsAdmin. This
applies the boundary at two layers:
- Move the route under adminOnlyMiddleware, alongside the other
admin-only resources (/library, /config, /inspect).
- Add an IsAdmin guard to the repository's rest.Repository read
methods (Read, ReadAll, Count) as defense-in-depth.
The guard is scoped to the REST methods only. The streaming pipeline
resolves profiles via Get/FindByFormat (model.TranscodingRepository),
which stay open so transcoding keeps working for non-admin users.
Adds regression tests covering non-admin read denial and confirming
non-admin streaming lookups (Get/FindByFormat) still succeed.
* fix(security): redact transcoding Command for non-admins instead of blocking reads
Reworks the previous approach after review (Codex P2): moving /transcoding
under adminOnlyMiddleware and denying non-admin reads broke legitimate
non-admin UI flows. The web UI reads the transcoding resource as a regular
user in several places that need only the profile name and target format:
the player edit dropdown (ReferenceInput), the player list (ReferenceField),
and the share/download format pickers (useGetList -> {targetFormat, name}).
The only sensitive field is Command (the admin-owned ffmpeg template). So:
- Revert the route move; /transcoding stays in the authenticated group.
- Read/ReadAll now return the profiles to any authenticated user but blank
the Command field for non-admins (mirrors user_repository's field-level
redaction). Count is no longer denied (the UI needs list pagination).
- Writes remain admin-only (Save/Update/Delete/Put).
- Streaming is unaffected: it resolves profiles via Get/FindByFormat, which
are not redacted, so on-the-fly transcoding keeps working for non-admins.
Tests updated: non-admin reads succeed with Command blank, admin reads keep
Command, non-admin Get/FindByFormat keep Command, writes still denied.
* fix(player): enforce ownership atomically on player update
The native API PUT /api/player/{id} authorized writes using the userId in
the request body via isPermitted, while the actual write targeted the row
by the URL id. A non-admin user could set userId to their own id in the
body to pass the check, then overwrite and reassign ownership of another
user's player row identified by the URL id (cross-tenant takeover).
Add updateOwned on the base repository: an atomic, ownership-restricted
UPDATE that folds the owner predicate (user_id = caller) into the WHERE
clause for non-admins, so a row owned by another user simply does not
match and no write happens. It also never writes user_id, so ownership is
immutable on update and no caller (admin included) can reassign a player
to a different owner. Unlike put, it never falls through to an INSERT, so
a non-matching id returns ErrNotFound instead of creating a row.
playerRepository.Update now uses updateOwned. Extract filterUpdateValues,
shared by put and updateOwned, so the update-column filtering lives in one
place. The create path (Save) keeps the body-based isPermitted check,
which is correct for new records.
Add regression tests covering the spoofed-userId hijack, regular-user and
admin ownership reassignment, legitimate owner updates, and the
nonexistent-player case.
* fix(share): enforce ownership atomically on share update
shareRepository.Update authorized writes with a separate checkOwnership
SELECT, then wrote the row via put(). The check and the write were two
statements (a TOCTOU window), put() could fall through to an INSERT on a
missing id, and put() would write user_id if present in the update
columns, so ownership was mutable on update.
Switch Update to updateOwned, which folds the owner predicate into the
UPDATE's WHERE clause, never writes user_id, and never inserts. This
makes the write atomic and ownership immutable, and drops the extra
ownership SELECT on the happy path.
To preserve the previous 403/404 distinction, updateOwned now classifies
a non-matching id: it runs a follow-up existence check only on the
failure path (count == 0, where no write happened, so no TOCTOU) and
returns ErrPermissionDenied when the row exists but is owned by another
user, ErrNotFound when the id is missing. The player path inherits this:
its tests now expect ErrPermissionDenied for a non-owner targeting an
existing row, and ErrNotFound only for a genuinely missing id.
Add share regression tests for the nonexistent-id and ownership-
reassignment cases. checkOwnership remains in use by Delete.
* refactor(persistence): extract canonical ownerFilter predicate
The non-admin owner-restriction predicate (user_id = me, exempting admins
and headless contexts) was spelled out independently in updateOwned and in
playerRepository.addRestriction. The two copies had drifted: addRestriction
did not exempt the headless/invalid user, so a headless context restricted
to user_id = "-1" (matching nothing) while updateOwned exempted it.
Extract sqlRepository.ownerFilter as the single definition and route both
call sites through it. addRestriction now exempts the headless user too;
that path is only reachable from the authenticated native API, so there is
no production behavior change, but the latent divergence is removed.
playlistRepository.userFilter is intentionally left alone: it encodes a
different policy (public OR owner_id = me, on the owner_id column).
* fix(share): preserve all-columns update path in Update
shareRepository.Update unconditionally appended "updated_at" to cols.
filterUpdateValues treats an empty cols as "update every column", so when
a caller passes no columns, appending "updated_at" turned an all-columns
update into an updated_at-only one, silently dropping every other field.
The REST controller always populates cols from the request-body field
names, so this path is not reachable through the native API and the
behavior was latent (and pre-existing). Guard the append so the
all-columns path is preserved, and add a regression test that updates
with no columns and asserts the other fields persist.
Signed-off-by: Deluan <deluan@navidrome.org>
---------
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(scrobbler): proxy NowPlaying even when ignoreScrobble is set
When a client reports playback with ignoreScrobble=true, the reportPlayback
handler suppressed both the scrobble submission and the NowPlaying update sent
to external agents (Last.fm, ListenBrainz, plugins). These are independent
concerns: ignoring the scrobble submission should not stop Navidrome from
telling external services what is currently playing.
The !params.IgnoreScrobble guard now applies only to the scrobble submission
and play-count path; the NowPlaying dispatch is gated solely by the player's
ScrobbleEnabled flag. This mirrors the legacy scrobble endpoint, where
submission=false has always still set NowPlaying.
* test(scrobbler): assert no scrobble dispatch when ignoreScrobble=true
Address PR review feedback: explicitly verify that ignoreScrobble=true
suppresses the scrobble submission (not just the play count) while NowPlaying
is still dispatched, so the flag cannot regress into ignoring nothing. Also
expand the NowPlaying gating comment to spell out the IgnoreScrobble vs
ScrobbleEnabled rules and identify the external agents involved.
* Add Gruvbox Dark theme
Add Gruvbox Dark color theme including:
- gruvboxDark.js with full palette and component overrides
- gruvboxDark.css.js with custom player styles
* Fix: move error state to MuiFormHelperText
The three It blocks that build a tight-cap streamer each spawned a fresh
transcoding cache without waiting for its background initialization. The
init goroutine reads conf.Server.CacheFolder, which races against
SnapshotConfig's pointer-swap restore (Server = &restored) fired by
DeferCleanup at the end of the spec. CI tripped the race under
-shuffle=on -race; locally it reproduced about 10% of the time.
Wait for tightCache.Available() before constructing the streamer, mirroring
the outer BeforeEach. For the slot-saturation spec, swap in a blocking
io.Pipe-backed mock ffmpeg so the cache's background copyAndClose can't
drain the source and release the slot — the previous behavior happened to
work only because the cache wasn't yet available and the no-cache path was
exercised.
* fix(playlists): preserve unchanged fields on partial REST updates (#5541)
The REST adapter for playlists was discarding the `cols` argument that
rest.Put provides (the list of fields actually present in the JSON
body). updatePlaylistEntity then compared the deserialized entity's
zero-valued Name/Comment against the DB row, decided "content changed",
and called updateMetadata with &entity.Name — overwriting the name with
the empty string.
This surfaced via the Playlists list view's bulk "Make Public" action,
which sends N parallel `PUT /api/playlist/{id}` requests with body
`{"public": true}`. Affected playlists ended up with their names wiped
(UI showed "Loading..." indefinitely). The per-row Public toggle was
unaffected because it spreads the full record into the payload.
Honor the cols list: gate every field-change check and every pointer
passed to updateMetadata by whether the field was actually in the
request body. Empty cols falls back to the existing "treat as a full
record" behavior so non-REST callers are unaffected.
* test(playlists): cover rules-only PUT + case-variant owner-change guard
Follow-ups from manual testing and code review of the prior commit:
- Manual testing confirmed Feishin-style rules-only PUT works correctly
on the fix; add ginkgo regression tests for rules-only update, name+
rules combined, idempotent rules PUT (no-op), and bulk Make-Public
preserving rules on smart playlists.
- Keep the non-admin owner-change permission check gated on the
deserialized entity content (not on `sent("ownerId")`) so a
case-variant JSON key like {"OwnerId":"x"} can't downgrade the 403
to a silent 200. Go's json decoder is case-insensitive on struct
field matching but rest.Put's field-name extraction is case-
sensitive; the entity-based guard catches both spellings. The
apply-side gating on ownerChanged still prevents the actual mutation,
so this was a behavioral (not security) regression, but worth fixing.
Adds a regression test asserting the case-variant key still returns
rest.ErrPermissionDenied.
- Correct misleading doc on applyContentUpdate: the path does not
rewrite the backing M3U file; it goes through updateMetadata which
bumps updatedAt and invalidates cached cover-art URLs.
* fix(playlists): match REST cols case-insensitively (PR #5542 review)
Go's encoding/json populates struct fields from case-variant keys like
{"Name":"x"} or {"OwnerId":"y"}, but rest.Put's getFieldNames extracts
raw JSON keys verbatim. With case-sensitive matching, sentFields would
ignore the field on the update side — a request with {"Name":"Renamed"}
would parse into entity.Name but then sent("name") returns false and
the rename silently no-ops.
Normalize both sides to lowercase. The entity-based owner-permission
guard added in the previous commit remains as belt-and-suspenders but
is now redundant with this change.
Also clarify the applyContentUpdate doc comment: namePtr/commentPtr
are nil when the field is absent OR present-but-unchanged, while
publicPtr only tracks presence (an idempotent public is still forwarded).
* refactor(playlists): drop redundant entity-based owner-permission guard
The case-insensitive sentFields predicate already prevents case-variant
JSON keys like {"OwnerId":"x"} from bypassing the ownerChanged check, so
the duplicated entity-content guard is no longer load-bearing.
Strengthen the regression test into a DescribeTable covering canonical,
PascalCase, all-upper, and all-lower spellings to lock in the
case-insensitive contract.
Dir embedded sync.Once directly and exposed a value-receiver GoString so
that pretty.Sprintf("%# v", Server) could render the path. That meant
every pretty-print copied the entire Dir along with its Once, and a
goroutine concurrently using the original (or any copy) for Path() could
hit a "sync: unlock of unlocked mutex" runtime fatal error. The failure
was reproduced deterministically on Windows CI when test-suite shuffle
ordering raced cache initialization (utils/cache/file_caches.go's
NewFileCache.func1 -> conf.CacheFolder.MustPath) against the
configuration-dump pretty.Sprintf in Load().
Drop the sync.Once entirely. Dir is now a plain {path, perm} value type,
and Path() calls os.MkdirAll on every invocation. MkdirAll is
idempotent, so repeated calls on an existing directory cost one stat
syscall — negligible for the few config paths read at startup and during
cache init.
This removes the entire class of bug:
- No Mutex, so copies (via reflection, pretty-print, etc.) are safe.
- No state pointer, so no nil-state defensive checks scattered across
methods, and no risk of two copies seeing different lifecycle state.
- go vet is happy with the value receivers — the //nolint:govet
suppression on GoString is gone.
Adds two regression tests in conf/dir_test.go:
- GoString renders Dir as a quoted path under pretty.Sprintf (and
does not leak the internal struct fields).
- Concurrent copy + Path() stress test, locking in the copy-safety
property in case the type ever grows non-trivial state again.
Move the option into the nested Transcoding config group alongside the
limit knobs it interacts with, so all transcoding-related settings live
together.
The old top-level name is still honored via the existing
mapDeprecatedOption / logDeprecatedOptions plumbing, which forwards the
value to the new key and logs a deprecation warning at startup. The old
struct field is removed (the new field is the single source of truth);
the deprecated default is removed so viper.IsSet correctly distinguishes
"user set the legacy option" from "no one set it."
* feat(transcoding): add MaxConcurrent and MaxConcurrentPerUser config
Introduce Transcoding.MaxConcurrent (default NumCPU()*2) and
Transcoding.MaxConcurrentPerUser (default 3) to support upcoming
concurrency limits on the streaming pipeline. No behavior change yet.
Refs #5246
* feat(transcoding): add TranscodeLimiter with global and per-user caps
Introduce a non-blocking limiter that gates concurrent transcodes. Returns
ErrTooManyTranscodes immediately when the cap is reached so callers can
translate it into a 429 response, rather than queuing requests.
The per-user reservation is taken first to avoid burning a global slot
that would only be rolled back when the per-user cap rejects the caller.
Release is idempotent so wrapping the transcoder reader's Close is safe.
Refs #5246
* feat(transcoding): cap concurrent transcodes in media streamer
Acquire a TranscodeLimiter slot before spawning ffmpeg in the transcoding
cache's read function, and release it when the resulting reader is closed.
Raw streams and cache hits bypass the limiter so a single saturating client
cannot block ordinary playback.
When the cap is reached, ErrTooManyTranscodes bubbles up through cache.Get,
ready for the HTTP layer to translate into a 429 response.
Refs #5246
* feat(transcoding): return HTTP 429 with Retry-After when transcode cap is hit
Map stream.ErrTooManyTranscodes to HTTP 429 in both the Subsonic API
(/stream, /download) and the public share endpoint, including a 5s
Retry-After hint. The Subsonic response still carries a failed-status
envelope so clients that ignore HTTP codes also see the failure.
Refs #5246
* feat(transcoding): default MaxConcurrent to 0 (disabled)
Ship the limiter opt-in so existing installations are not affected by a
behavior change on upgrade. Users hitting the DoS reported in #5246 can
enable it by setting Transcoding.MaxConcurrent to a positive value
(NumCPU()*2 is a reasonable starting point).
Refs #5246
* fix(transcoding): make global and per-user caps independent
Previously the limiter short-circuited to a no-op whenever MaxConcurrent
was zero, silently ignoring a configured MaxConcurrentPerUser. Treat each
cap independently so an operator can throttle per-user without enforcing
a global ceiling (or vice versa), and only fall back to the no-op limiter
when both caps are disabled.
* fix(archiver): abort archive download when the transcode limiter rejects
The album/artist/playlist zip writers were silently producing zip entries
with headers but no data when ms.NewStream returned ErrTooManyTranscodes,
because the per-file error was discarded by `_ = a.addFileToZip(...)`.
The client received HTTP 200 with a corrupt zip and no indication that
the server was rate-limited.
Now the zip loop bails out as soon as it sees ErrTooManyTranscodes, and
the Download handler swallows the error (the response status and
Content-Disposition are already flushed by the time the limit is hit, so
no 429 can be sent). The truncated zip surfaces the problem to the
client; operators see a clear "transcode cap reached" warning in the
server logs.
Refs #5246
* fix(transcoding): release limiter slot on client close, not ffmpeg EOF
Previously the slot was wrapped around the ffmpeg source reader, so it
was only released by the cache's background copyAndClose goroutine when
ffmpeg finished producing the file — meaning a client that disconnected
after a single byte still held the slot for the full transcode duration.
Under MaxConcurrent=N this serialized fresh requests behind abandoned
encodes for minutes.
Hand the release function back from the cache producer via the streamJob
struct and wire it into the consumer-side Stream.Close. The HTTP handler
already runs `defer stream.Close()`, so disconnect now frees the slot
immediately. Cache hits never enter the producer and still pay no slot,
and singleflight waiters on the same key correctly inherit no release
(only the original producer's job holds the slot).
Refs #5246
* fix(transcoding): skip per-user cap for anonymous requests
Public share viewers have no user in context, so userName(ctx) returned
the literal string "UNKNOWN" and the limiter mapped every anonymous
viewer to the same bucket. With MaxConcurrentPerUser=N, only N
unrelated anonymous clients could stream a viral share at any time —
the opposite of the fairness the per-user cap is meant to provide.
Introduce a limiterKey(ctx) helper that returns "" for anonymous
callers (userName(ctx) is unchanged for logs), and teach Acquire to
skip the per-user reservation when the key is empty. The global cap is
still enforced for anonymous traffic and remains the protection against
runaway anonymous load.
Refs #5246
* refactor(transcoding): tidy limiter struct and centralize Retry-After
Per review feedback:
- Drop the redundant maxConcurrent field on transcodeLimiter; the channel
capacity already enforces the global cap and the field was only used
inside the constructor.
- Only allocate the perUser map when MaxConcurrentPerUser > 0.
- Move the Retry-After value into core/stream as RetryAfterSeconds so the
Subsonic API and public-share handlers cannot drift if the window is
later tuned.
* fix(transcoding): do not log limiter rejections as cache failures
NewStream was emitting an error-level "Error accessing transcoding cache"
log whenever cache.Get returned anything non-nil, including the limiter's
ErrTooManyTranscodes — even though the producer had already logged the
rejection at warn level. The result was double logging and a misleading
"cache failure" classification that buries real cache problems.
Skip the error log when the cause is ErrTooManyTranscodes; the warn line
from the producer is the canonical signal.
* fix(archiver): open stream before writing zip entry header
Per review: addFileToZip previously called z.CreateHeader before
NewStream, so when the limiter rejected a transcode the zip already
contained a 0-byte entry for that track. Open the source first and only
write the header once the read side is ready; rejections now skip the
entry entirely.
The truncation comment in handleArchiveErr was also misleading — z.Close
finalises the central directory, so the client receives a well-formed
zip containing only the tracks written before the rejection, not a
"truncated" archive. Reword to match reality.
* fix(transcoding): hold slot for ffmpeg lifetime, force cancellable ctx
The previous release-on-consumer-close design let a client open many
unique transcodes, disconnect immediately, and still spawn the
configured cap's worth of ffmpeg processes — the cache writer goroutine
continued draining ffmpeg to disk after the client disappeared, defeating
the DoS protection the limiter is meant to provide.
Move the release back onto the source reader so the slot is freed only
when ffmpeg actually exits (either EOF or context cancellation). To keep
disconnects from leaking slots for the full transcode duration, force
the request context into ffmpeg whenever the limiter is enabled — so
client disconnect cancels the process and frees the slot promptly.
When the limiter is disabled, the legacy EnableTranscodingCancellation
behavior is preserved unchanged.
Reported by codex and Copilot reviewers on #5522.
* fix: split tag values from multiple sources individually
When a file has multiple tag frames mapping to the same logical tag
(e.g. both TXXX:MOOD and TMOO), TagLib merges them into one key with
multiple values. SplitTagValue had a len(values) != 1 guard that
skipped splitting entirely in this case, leaving comma-separated
values unsplit.
Change SplitTagValue to split each value individually regardless of
input count. Empty values are filtered during splitting.
Fixes#5065
* test: cover SplitTagValue with multi-frame regression cases
Add tests pinning the behavior fixed by SplitTagValue iterating over each
input value. The previous len(values) != 1 short-circuit silently skipped
splitting whenever TagLib merged multiple ID3v2 frames into the same
property (e.g. TMOO + TXXX:MOOD for mood, or duplicate TIPL entries for
composer), as reported in #5065.
Three layers of coverage:
- model/tag_mappings_test.go: direct unit tests on TagConf.SplitTagValue
covering single/multi-value input, case-insensitive separators, missing
SplitRx, empty input, and the empty-strings-passed-through contract that
the downstream metadata pipeline relies on.
- model/metadata/metadata_test.go: end-to-end check that a "mood" tag
surfaced as two raw values (the exact shape from the bug report) is
split, trimmed, and deduplicated to the expected three moods.
- model/metadata/map_participants_test.go: parallel multi-value case for
the COMPOSER tag, ensuring the same fix also corrects multi-frame role
parsing.
All three new specs fail on the pre-fix code and pass on the patched
SplitTagValue.
---------
Co-authored-by: Deluan Quintão <deluan@navidrome.org>
* fix(lastfm): require signed state token on link callback
The Last.fm OAuth callback at /api/lastfm/link/callback trusted a raw
\`uid\` query parameter and wrote the resulting Last.fm session key under
that user with no ownership check. Any authenticated user who learned a
victim's internal user ID (e.g. from playlist ownerId) could redirect the
victim's scrobbles to an attacker-controlled Last.fm account by calling
the callback directly with the victim's uid and a Last.fm token obtained
for their own account.
The callback cannot use the regular auth middleware because it is reached
via a browser redirect from Last.fm, which cannot carry a JWT header.
Instead, GET /api/lastfm/link (authenticated) now also returns a short-
lived (5 min) HMAC-signed link token bound to the requesting user, with a
dedicated "lastfm-link" scope claim. The callback verifies the signature,
scope and expiry before deriving the user ID from the token; the \`uid\`
query value is no longer trusted as a user identifier. The UI fetches
this token at link-flow start and passes it in place of the raw user ID.
Reuses the existing HS256 secret via auth.EncodeToken/DecodeAndVerifyToken
so no new key management is introduced.
* fix(ui): keep Last.fm popup tied to user gesture for Safari
Opening the Last.fm OAuth tab after an awaited fetch causes the popup to
be blocked on Safari and on Firefox with strict popup blocking enabled,
because the browser's transient-activation window has already elapsed by
the time window.open is reached. Linking became impossible on those
browsers in the previous commit.
Move the click handler up to the parent component and open a placeholder
about:blank tab synchronously from the click; the linkToken fetch then
runs in parallel and we redirect the existing tab to Last.fm's auth URL
once it resolves. The user gesture stays attached to the window.open
call, so popup blockers no longer fire.
The polling/progress UI is unchanged; it now receives the openedTab ref
from the parent instead of owning it.
* fix(lastfm): require exp claim on link tokens
jwtauth.VerifyToken treats a JWT without an exp claim as non-expiring, so
verifyLinkToken used to delegate expiry handling entirely. A future
regression in createLinkToken that dropped the exp field would silently
turn link tokens into permanent bearer credentials.
Assert presence of an exp claim explicitly and add a regression test
covering the missing-exp case. Also tightens the wrong-scope test to use
a freshly-minted token with all claims present except the scope, instead
of relying on auth.CreatePublicToken which happens to also be missing
exp.
* style(lastfm): simplify comments in link token code
Trim doc comments on createLinkToken/verifyLinkToken/callback/startLink
to the load-bearing lines: keep the non-obvious 'jwtauth treats missing
exp as non-expiring' note and the popup-blocker hint, drop the rest
since the function names already describe behavior.
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(lastfm): address review feedback on link token PR
- Wrap openInNewTab in a try/catch in startLink: openInNewTab calls
win.focus() unconditionally, so if the browser blocks the popup
(window.open returns null) it throws a TypeError synchronously,
before the catch() on the link-token fetch is attached. The throw
used to escape the click handler, leaving the UI without a
notification. Now the failure is surfaced as lastfmLinkFailure and
the toggle stays usable.
- Rename the link-token "subject" rejection message to "user ID" since
the claim is uid, not the JWT sub field.
---------
Signed-off-by: Deluan <deluan@navidrome.org>
The navidrome-music-player library rewinds the current track by directly
mutating audio.currentTime when the Previous button is pressed with
restartCurrentOnPrev (and other programmatic seek paths like singleLoop
reset and mediaSession seek). It does not invoke its onAudioSeeked
callback for these, so the play tracker never learned about the new
position until the next ~30s heartbeat.
Replace the React onAudioSeeked prop with a native HTML5 'seeked' event
listener on the audio element, which fires for every seek (programmatic
or via slider release). The handler is debounced by 250ms so the burst
of seeks emitted while dragging the progress bar coalesces into a single
reportPlayback call at the final position.
The Subsonic API spec defines songCount and created as required attributes
on AlbumID3, but they were tagged with omitempty in our response struct,
allowing them to be silently dropped from responses (e.g. when songCount
was 0). Created was also a *time.Time, which compounded the omitempty
behavior.
Remove omitempty from both fields and change Created from *time.Time to
time.Time so they are always serialized, matching the spec contract that
clients rely on. The buildAlbumID3 helper and its tests are updated for
the non-pointer Created, and the AlbumWithSongsID3 snapshots are
regenerated to include the now-always-present fields.
* fix(server): optimize smart playlist role queries for large criteria (#5511)
Role-based smart playlist criteria (artist, composer, etc.) now query
the indexed media_file_artists join table instead of parsing JSON via
json_tree() on every row. Multiple conditions for the same role within
an OR group are merged into a single EXISTS subquery (batched at 200
to stay under SQLite's expression tree depth limit).
A composite index (media_file_id, role) replaces the now-redundant
single-column (media_file_id) index on media_file_artists.
Benchmark (40k tracks, 500 patterns, 3 artists/track):
- Merged join-table: 15ms (9.3x faster)
- Merged json_tree: 30ms (4.6x faster)
- Unmerged baseline: 137ms
* refactor: simplify role condition SQL generation and benchmark
Extract shared roleCondSQL/roleExistsSQL helpers to deduplicate the
EXISTS template between roleCond and roleCondGroup. Use slices.Chunk
for batching per project convention. Extract runBenchQuery helper to
eliminate triplicated benchmark execution loop.
* chore: raise roleCondBatchSize to 350
The empirical SQLite limit is 496 conditions per merged EXISTS
subquery. Raising from 200 to 350 reduces the number of batches
(e.g. 500 patterns now splits into 2 batches instead of 3).
* fix(server): apply OR-merge optimization to tag conditions too
Generalize mergeRoleConds into mergeJsonConds to also collapse multiple
tag conditions for the same tag (e.g. genre) within OR groups. This
gives the same ~5x speedup for tag-heavy smart playlists as the role
optimization gives for artist-heavy ones.
* refactor: benchmark uses real criteria pipeline instead of hand-built SQL
The "Current" sub-benchmark now builds criteria.Criteria expressions and
runs them through the actual newSmartPlaylistCriteria → Where() → ToSql()
pipeline, validating the real production code path. The baseline still
uses hand-built SQL representing the old json_tree approach.
* fix: stabilize merged group ordering and close rows before error check
Sort group keys in mergeJsonConds so the merged additions have
deterministic order across runs, improving SQLite statement cache reuse.
Move rows.Close() before rows.Err() in benchmark helper.
* fix(i18n): correct grammar errors in Serbian (sr) translation
Eight objective grammatical / lexical errors in `resources/i18n/sr.json`.
No stylistic or strategic re-wording — only corrections where the
current string is grammatically wrong, contains a non-word, or breaks
plural / case agreement.
| Key | Before | After | Why |
| --- | --- | --- | --- |
| `resources.song.fields.bitDepth` | `Битова` | `Битска дубина` | "Битова" is genitive plural of "bit" ("of bits") and drops the "depth" semantics. Adjective+noun shape matches `Битски проток` already used for the adjacent "Bit rate" field |
| `resources.song.fields.channels` | `Канала` | `Канали` | "Канала" is genitive plural ("of channels"); a column header needs nominative plural "Канали" |
| `resources.radio.name` plural | `Радији` | `Радио-станице` | "Радији" is not a valid plural of "Радио" in Serbian. The standard plural for radio stations is "Радио-станице" |
| `ra.input.file.upload_*` and `ra.input.image.upload_*` | `Упустите фајлове / слике …` | `Превуците фајлове / слике …` | "Упустити" means "to engage in / to indulge", not "to drop". For drag-and-drop UIs the standard Serbian verb is "Превуците" ("Drag") |
| `ra.navigation.prev` | `Претход` | `Претх.` | "Претход" is not a word — looks like a truncated "Претходна" missing the period. Restored as a proper abbreviation |
| `about.links.featureRequests` | `Захтеви за функцијама` | `Захтеви за функције` | Wrong case. Serbian "захтев за X" takes accusative ("захтев за помоћ"), not instrumental ("за функцијама") |
| `player.clickToPauseText` / `clickToPlayText` | `Кликни за паузирање / пуштање` | `Кликните за паузирање / пуштање` | The rest of the file uses formal plural imperative ("Кликните…"). Only these two used the singular informal "Кликни", which broke the consistent register |
JSON validated with `python3 -m json.tool`. No keys added, removed, or
re-ordered — diff is purely value substitution. Stylistic and lexical
modernization (e.g. "Уметник" → "Извођач" for music artist, filling
the missing `library` / `plugin` / `nowPlaying` blocks added in upstream
en.json) intentionally left for a follow-up PR after this baseline of
objective fixes lands.
* fix(i18n): fill missing keys in Serbian (sr) translation — 100% coverage
The Serbian translation was at 70% of upstream `en.json` (389 of 553 keys).
This commit fills all 164 missing keys, bringing coverage to 100%.
The file is also re-ordered to match `en.json`'s key sequence so that
future translation drift is easy to detect by diffing the two files
side-by-side. This is the same regeneration pattern used by the previous
maintainer's PR #3941.
## What was missing
| Block | Keys | Notes |
| --- | ---: | --- |
| `resources.plugin` | 58 | Whole Plugin system block — settings, config schema, permissions, notifications |
| `resources.library` | 43 | Whole Library management block — fields, scan actions, validation, notifications |
| `about.config` + `about.tabs` | 12 | Configuration export feature (TOML) |
| `message.*` | 11 | Cover-art upload/remove + Instant Mix + remove-all-missing |
| `resources.song` | 9 | composer, sample rate, gain fields, instant mix, show-in-playlist |
| `resources.playlist` | 6 | search-or-create UX, save-queue-to-playlist |
| `resources.artist` | 5 | top songs / shuffle / radio actions, missing field, maincredit role |
| `resources.user` | 5 | Per-user library access controls |
| `menu.librarySelector` | 4 | Multi-library selector |
| `activity` | 4 | selectiveScan, scanType, status, elapsedTime |
| `nowPlaying` | 3 | Now Playing widget (title / empty / minutesAgo plural) |
| `resources.album` | 2 | libraryName, missing |
| `resources.missing` | 2 | remove_all action, libraryName field |
## Translation conventions followed
- Stuck with the existing terminology already in `sr.json` for consistency
— e.g. `Уметник` for "Artist", `Плејлиста` for "Playlist", `Жетон`
for "Token". Whether `Уметник` → `Извођач` (music-context "performer")
is a worthwhile rename is a separate question that deserves its own PR
with a focused review surface; not in scope here.
- Cyrillic throughout (matches `languageName: "српски"`).
- Variable interpolation (`%{var}`) preserved exactly.
- Pluralisation separator (` |||| `) preserved on plural-aware keys
(`nowPlaying.minutesAgo`, `resources.library.name`, `resources.plugin.name`,
`resources.artist.roles.maincredit`).
## Validation
- JSON validated with `python3 -m json.tool`
- Key-count parity check: 553 keys in `en.json` → 553 keys in `sr.json`,
zero missing, zero extra.
- Diff is +408 / -200 (line moves due to canonical ordering plus the
net 164 new translations). All existing translations preserved verbatim.
## Builds on PR #5444
This branch sits on top of `i18n-sr-grammar-fixes` (PR #5444). If that
PR merges first, this one auto-rebases cleanly. If this one merges first,
PR #5444 has trivial conflicts in the same 7 strings (all already
resolved here as part of regeneration).
* fix: require admin for radio mutations
Subsonic internet radio station mutation endpoints are admin-only in the Subsonic and OpenSubsonic specs, but the router only required an authenticated player. Add a reusable Subsonic admin middleware and apply it to create, update, and delete radio routes while leaving the list endpoint available to authenticated users. Cover the middleware and router behavior with unit and e2e tests.
* fix: streamline admin-only routes for internet radio station management
Signed-off-by: Deluan <deluan@navidrome.org>
* fix: use admin-only middleware for starting scans
Signed-off-by: Deluan <deluan@navidrome.org>
* test: align start scan authorization coverage
StartScan authorization now lives in the shared Subsonic admin middleware instead of the handler. Remove the obsolete direct handler unit assertion so the package tests reflect the route-level guard covered by middleware and e2e tests.
* fix: require admin for getUsers
The Subsonic getUsers endpoint exposes user-list semantics and should use the same shared admin middleware as other admin-only management endpoints. Apply the route-level guard while leaving getUser unchanged, and update the multi-user e2e coverage to expect regular users to receive an authorization failure.
* test: cover admin-only Subsonic access
Add e2e coverage that admins can still call getUsers after the route-level guard and that regular authenticated users can still list internet radio stations. These cases capture the access boundaries raised during PR review.
---------
Signed-off-by: Deluan <deluan@navidrome.org>
* feat(conf): add Dir type with lazy directory creation
Introduces the Dir type that wraps a directory path string and defers
os.MkdirAll until the first call to Path() or MustPath(), using sync.Once
to ensure the creation happens exactly once. Implements fmt.Stringer,
encoding.TextMarshaler, and encoding.TextUnmarshaler for config integration.
Includes Ginkgo/Gomega tests covering all methods and error paths.
* refactor(conf): replace eager dir creation with lazy Dir type
Change DataFolder, CacheFolder, Plugins.Folder, and Backup.Path from
string to Dir. Remove all os.MkdirAll calls from Load() so directories
are created lazily on first Path()/MustPath() call. Artwork folder
creation was already handled at point-of-use in image_upload.go.
Add SnapshotConfig() to conf package for safe test config save/restore
that avoids copying sync.Once inside Dir fields. Fix copy-lock vet
warning in nativeapi/config.go by marshalling pointer instead of value.
* refactor(conf): migrate tests and db init to lazy Dir type
Update all test files to use conf.NewDir() for Dir field assignments.
Ensure DataFolder is created lazily when the database is first opened
in db.Db(). Remove eager directory creation from conf.Load() tests.
* fix(conf): address review findings for Dir type
- Use os.ModePerm for DataFolder/CacheFolder (was 0700, should match
original behavior). Add NewDirWithPerm for PluginsFolder (0700).
- Use Path() instead of MustPath() in db.Prune() to avoid logFatal
from background cron job.
- Panic on marshal/unmarshal errors in SnapshotConfig (test helper).
- Clean up redundant String()/MustPath() calls in plugin manager.
- Remove dead code in dir_test.go.
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(conf): add GoString to Dir for clean config dump output
Implement fmt.GoStringer on Dir so pretty.Sprintf shows the path
string instead of internal struct fields (sync.Once, perm, err).
Also add TODO comment to configtest about removing the indirection.
* fix(dir): improve error logging in MustPath method
Signed-off-by: Deluan <deluan@navidrome.org>
* refactor(tests): remove redundant tests for unwritable DataFolder and CacheFolder
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(conf): address PR review feedback
- Ensure Plugins.Folder always uses 0700, even when user-configured
(previously only the derived default got restrictive permissions).
- Create LogFile parent directory before opening, so LogFile paths
inside a not-yet-created DataFolder work correctly.
---------
Signed-off-by: Deluan <deluan@navidrome.org>
Move the ffmpeg -ss (seek/offset) parameter before -i in all transcoding
commands so ffmpeg uses input seeking instead of output seeking. Per the
ffmpeg docs, placing -ss before -i seeks at the demuxer level by keyframe
(very fast), and since FFmpeg 2.1 it is also frame-accurate when
transcoding. The previous placement after -i caused ffmpeg to decode and
discard all audio up to the seek point, which was unnecessarily slow —
especially problematic for lengthy files (4+ hours).
Both code paths are updated: buildDynamicArgs (for default formats) and
createFFmpegCommand (for custom templates without %t). A database
migration updates existing default commands in the transcoding table.
The `held` channel in `runTwoRequests` was unbuffered, creating a race
condition with the `select/default` send in the handler. Under CI load
(slow runner, -race, -shuffle=on), the handler goroutine could reach
the select before the test goroutine blocked on `<-held`, causing the
send to silently fall through to `default` and deadlocking both
goroutines permanently.
Buffer the channel (capacity 1) so the send always succeeds regardless
of goroutine scheduling order.
* fix(transcoding): don't apply server-side transcoding override on getTranscodeDecision
The getTranscodeDecision endpoint was incorrectly applying server-side
player transcoding overrides (forced format and MaxBitRate cap), which
replaced the client's declared capabilities with synthetic profiles.
This caused the endpoint to ignore what the client can actually play and
return decisions for formats the client never requested (e.g. AAC when
the client only supports FLAC/opus/mp3). The override is now gated
behind an ApplyServerOverride flag in TranscodeOptions, which is only
set by the legacy stream endpoint where this behavior is expected.
Signed-off-by: Deluan <deluan@navidrome.org>
* refactor: move server-side transcoding override to ResolveRequest
Moved the server-side player transcoding override logic (forced format
and MaxBitRate cap) from MakeDecision into ResolveRequest, where the
legacy stream context is handled. This makes MakeDecision a pure
function that only operates on the ClientInfo it receives, removing the
ApplyServerOverride flag and all context-sniffing from the decision
engine. Tests moved accordingly to legacy_client_test.go.
* test(e2e): update transcode decision tests for server override removal
Updated e2e tests to reflect that getTranscodeDecision no longer applies
server-side player overrides (MaxBitRate cap and forced transcoding
profile). The player MaxBitRate tests now verify the endpoint ignores
the player cap and relies solely on client-declared capabilities.
* test(e2e): assert opus default bitrate when player cap is ignored
Added bitrate assertion to verify the player MaxBitRate cap is truly
ignored: the target bitrate should be the opus format default (128kbps),
not the player cap (320kbps).
---------
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(server): prevent artwork throttle token starvation on slow clients
Replace Chi's ThrottleBacklog middleware for artwork endpoints with a
custom RequestThrottle that releases processing tokens before writing
the HTTP response. Previously, a slow or stalled client could hold a
throttle token indefinitely during io.Copy, exhausting all 2-4 slots
and blocking artwork requests for all users (reported after 15+ days
uptime).
The new approach buffers artwork into memory while holding the token,
releases it immediately, then writes the buffered response. A 30-second
per-request write deadline (SetWriteTimeout) prevents stalled writes
from blocking indefinitely. Throttle exhaustion is now logged with
context for operator visibility.
* refactor(server): simplify throttle to middleware with same API as Chi
Restructure RequestThrottle from a DI-injected type into a drop-in
middleware function with the same signature as Chi's ThrottleBacklog.
Handlers are reverted to their original simple form (no throttle
awareness), and the middleware is applied at route definition time
just like before. This eliminates the DI dependency, removes the
artworkThrottle field from both Router structs, and consolidates
SetWriteTimeout into the throttle file. When limit <= 0, the
middleware returns a passthrough so callers don't need a guard.
Signed-off-by: Deluan <deluan@navidrome.org>
* feat(server): add opt-out flag for buffered artwork throttle
Add DevArtworkThrottleBuffered config (default true) that controls
whether the new buffered ThrottleBacklog middleware is used. When set
to false, it falls back to Chi's original middleware, giving users a
safety valve in case the buffered implementation causes issues.
Signed-off-by: Deluan <deluan@navidrome.org>
* test(server): clean up throttle tests for clarity and speed
Consolidate duplicate router setup into runTwoRequests() and
slowClientTest() helpers. Replace time.Sleep-based token holding with
channel synchronization, reducing suite time from ~7s to ~1.5s.
Remove redundant test, fix duplicate comment block, and add comment
explaining why slowTestWriter can't embed httptest.ResponseRecorder.
* fix: release artwork throttle tokens on panic
Defer the buffered artwork throttle release inside the handler closure so tokens are returned even when a downstream handler panics before response flushing. Document that the middleware buffers full responses in memory and add a regression test covering recovery after a panic.
* fix: align buffered throttle response behavior
Keep only the first status code written to the buffered artwork throttle response writer so it matches net/http semantics. Strengthen the opt-out test to verify DevArtworkThrottleBuffered=false uses Chi's original slow-client behavior instead of only checking shared 429 handling.
* refactor(server): remove setWriteTimeout from throttle middleware
SetWriteDeadline only constrains the server's Write syscall, not how
fast the client reads from the TCP buffer. For artwork-sized responses
(up to ~500KB), the kernel accepts the entire write immediately even
over real network interfaces due to TCP buffer auto-tuning. Verified
by testing with a stalled client over both loopback and en0 — the
deadline never triggers. The actual protection comes from buffering +
early token release, which is already in place.
---------
Signed-off-by: Deluan <deluan@navidrome.org>
Log skipped entries, total entries vs plugins found, and DB state
to help diagnose why sync may not find new plugins.
Signed-off-by: Deluan <deluan@navidrome.org>
* feat(ui): add Rescan button to plugin list empty state
When no plugins are installed and the folder watcher fails to detect new
plugins, users had no way to trigger a rescan. Extract RescanButton into
a shared component and render it in a custom empty state for the plugin
list.
* refactor(ui): address review feedback for plugin empty state
- Pass label translation key directly to RA Button (auto-translates)
- Use within() from Testing Library instead of querySelector for
scoped queries with better error messages
* fix(artwork): include top-level album folders in parent cover art lookup
The Path != "." guard added in #5451 was too aggressive — it excluded
any folder with Path=".", which includes top-level album folders (not
just the library root). Changed to ParentID != "" which correctly
excludes only the actual library root folder.
Fixes#5456
* fix: correct comment in test — album is under library root, not artist root
* test: add ascii tree diagram to top-level album e2e test
* test: replace internal bug references with issue link in e2e comments
Signed-off-by: Deluan <deluan@navidrome.org>
* test: add e2e test matching reporter's exact library layout (#5456)
Adds a deeply nested test (Genre/Artist/Album/Disc) with 12 discs
using the reporter's actual folder names to verify artwork resolution
works for non-top-level album folders too.
* fix(scanner): use a syntectic admin user when no admin user is found
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(scanner): bump album UpdatedAt on Phase 3 refresh to invalidate artwork cache
When Phase 3 corrects an album's FolderIDs (or any other field), bump
UpdatedAt to the current time. This ensures the artwork cache key changes,
invalidating any stale artwork that was resolved and cached during Phase 1
when the album had incomplete folder data.
* fix(artwork): include ImportedAt in artwork cache key to invalidate stale cache
Reverts the Phase 3 UpdatedAt bump (which would change album.UpdatedAt
semantics) and instead includes album.ImportedAt in the artwork cache key
computation. Since ImportedAt is bumped to time.Now() on every album Put,
any Phase 3 correction naturally invalidates cached artwork that was
resolved mid-scan with incomplete folder data.
* fix(artwork): simplify lastUpdate logic using TimeNewest utility
Signed-off-by: Deluan <deluan@navidrome.org>
---------
Signed-off-by: Deluan <deluan@navidrome.org>
* chore(ci): update GitHub Actions to latest major versions
Update actions/cache v4→v5, actions/github-script v3→v7,
actions/stale v9→v10, docker/login-action v3→v4,
docker/setup-buildx-action v3→v4, and docker/metadata-action v5→v6.
The github-script upgrade also migrates Octokit API calls from
github.* to github.rest.* namespace (required since v5).
* fix(ci): address review feedback on GitHub Actions update
Pass github_token to docker/metadata-action@v6 to avoid API rate
limiting. Fix github-script pagination to use the correct Octokit
paginate.iterator pattern (pass endpoint method, not awaited response).
Replace timing-sensitive time.Sleep synchronization with proper
Eventually/Consistently assertions in watcher tests, and increase
Eventually timeouts from 200ms to 500ms. Add FlakeAttempts(3) to the
inherently timing-dependent tests. For the scheduler test, increase
the Eventually timeout from 1s to 5s for the cron job execution check.
Fixed two bugs in album cover art resolution for multi-disc layouts:
1. compareImageFiles now sorts by path depth (shallower first) when basenames
tie, so album-root images like Artist/Album/cover.jpg are preferred over
disc-subfolder images like Artist/Album/CD1/cover.jpg.
2. commonParentFolder now includes the parent folder for single-disc-subfolder
albums, with a Path != "." guard to avoid pulling artist-folder images.
Closes#5376
* feat(plugins): add PlaybackReport to Scrobbler interface and all implementations
* feat(plugins): add PlaybackReport worker and dispatch in PlayTracker
* feat(plugins): add PlaybackReportRequest to plugin scrobbler capability
* chore(plugins): regenerate PDK files with PlaybackReport
* feat(plugins): add PlaybackReport to test scrobbler plugin
* feat(plugins): add PlaybackReport to plugin scrobbler adapter
* refactor(plugins): fix double DB fetch in StateStopped and batch getActiveScrobblers
- Hoist mf from scrobble branch so PlaybackReport reuses it instead of
fetching again from DB
- Call getActiveScrobblers once per drain batch instead of per-entry
* chore(plugins): include generated scrobbler schema with PlaybackReport
* fix(plugins): skip PlaybackReport for plugins that don't export it
Plugins detected as scrobblers only need to export one scrobbler
function. Older plugins that don't export nd_scrobbler_playback_report
would cause noisy error logs on every reportPlayback call. Now
errFunctionNotFound and errNotImplemented are treated as no-ops.
* refactor: rename NowPlayingInfo to PlaybackReport
Signed-off-by: Deluan <deluan@navidrome.org>
* refactor: rename stopNowPlayingWorker to stopBackgroundWorkers
Signed-off-by: Deluan <deluan@navidrome.org>
* refactor: move NowPlaying and PlaybackReport logic to separate worker files
Signed-off-by: Deluan <deluan@navidrome.org>
* refactor(scrobbler): rename NowPlayingInfo to PlaybackSession and add expired state
Rename NowPlayingInfo struct to PlaybackSession to better reflect its role
as a complete playback session representation. Add UserId field to make
sessions self-contained, removing redundant userId parameters from
PlaybackReport interface method and internal dispatch functions. Introduce
StateExpired internal state that fires when a session cache entry expires
without an explicit stop, ensuring plugins always receive a terminal event
regardless of client behavior.
* fix(scrobbler): update playback state description to include 'expired'
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(scrobbler): resolve data race in OnExpiration callback
Capture conf.Server.EnableNowPlaying at construction time instead of
reading it from the background ttlcache eviction goroutine. The previous
code raced with test config cleanup that writes to the same field
concurrently.
* fix(scrobbler): return error when media file lookup fails in StateStopped
Simplify the MediaFile population logic in the stopped case to return an
error if the track cannot be found. A stop report with an empty MediaFile
is useless to plugins, and returning the error allows clients to retry
or alert the user when auto-scrobble is enabled.
* refactor(scrobbler): use session data directly in PlaybackReport adapter
Use info.Username from PlaybackSession instead of extracting it from
context in the plugin adapter, since the session is now self-contained.
Add debug/trace logging for session expiration and enqueue the expired
report with a user-enriched context so downstream handlers can identify
the user.
---------
Signed-off-by: Deluan <deluan@navidrome.org>
* feat(config): add UIPlaybackReportInterval setting
* feat(server): expose playbackReportIntervalMs to UI config
* feat(ui): add playbackReportIntervalMs config default
* feat(ui): replace scrobble/nowPlaying with reportPlayback in subsonic API layer
* feat(ui): replace scrobble logic with reportPlayback state machine in Player
* refactor(ui): simplify Player heartbeat using useInterval hook
- Replace manual setInterval/clearInterval with existing useInterval hook
- Extract shared reportPlaybackUrl helper to deduplicate URL construction
- Use ref for currentTrackId in beforeunload to stabilize effect deps
- Have heartbeat read lastPositionMsRef instead of audioInstance.currentTime
* feat(ui): redesign NowPlaying panel with Discord-style layout
Show album art with play/pause overlay icon, track title, artist,
album name, progress bar with position/duration, and username.
* fix(ui): adjust NowPlaying panel height to fit 3 entries
* fix(ui): send stopped on player close and tab close while paused
- onBeforeDestroy now sends reportPlayback stopped before clearing queue
- beforeunload sends stopped beacon regardless of pause state
* feat(ui): animate NowPlaying progress bar with 1s client-side tick
* fix(ui): account for playbackRate in NowPlaying progress interpolation
* fix(ui): use timestamp-based interpolation for smooth NowPlaying progress
Replace tick counter with fetchedAt timestamp so the progress bar
advances smoothly without resetting on each server poll.
* fix(ui): fix NowPlaying progress bar not animating
Pass `now` (Date.now()) as a prop that changes every tick, so
React.memo'd components actually re-render each second.
* fix(ui): prevent progress bar reset on NowPlaying poll
Set fetchedAt and now atomically on fetch so the elapsed offset
starts at zero and the server's already-estimated positionMs
is used as the base without a visible jump.
* fix(ui): stamp entries with fetch time to prevent progress bar reset
Embed _fetchedAt timestamp directly into each entry object so the
position and its reference timestamp are always in the same state
update, eliminating the React 17 multi-setState batching race.
* fix(server): estimate position for starting state in GetNowPlaying
GetNowPlaying was only estimating elapsed position for the "playing"
state, returning raw positionMs=0 for "starting". Since the UI
player sends "starting" once and then doesn't update until the
60s heartbeat, NowPlaying polls returned 0 for up to a minute,
causing the progress bar to reset on every poll.
* fix(ui): send playing immediately after starting to enable position estimation
The server only estimates elapsed position for "playing" state in
GetNowPlaying. The Player was sending "starting" once and then not
updating until the 60s heartbeat, leaving the server state as
"starting" with positionMs=0 for up to a minute.
Now the Player follows up "starting" with an immediate "playing"
call, transitioning the server state so position estimation works
from the first poll.
* fix(subsonic): fix getNowPlaying returning same playerId for all entries
PlayerId was never incremented in the map callback, so every entry
got playerId=1. This caused the UI to use duplicate React keys,
mixing up rendered entries between players. Also use a stable
composite key in the UI instead of the sequential playerId.
* fix(ui): only send stopped beacon when tab is actually closing
Move the reportPlaybackBeacon call from beforeunload to pagehide.
beforeunload fires before the confirmation dialog, so cancelling
the close would still send stopped. pagehide only fires when the
page is actually being unloaded.
* fix(ui): revert to beforeunload for stopped beacon
pagehide does not fire reliably in Chrome when closing tabs.
Use beforeunload instead — if the user cancels the close dialog,
the heartbeat will re-register the NowPlaying entry on its next tick.
* fix(ui): use synchronous XHR for stopped report on tab close
Replace sendBeacon with synchronous XMLHttpRequest in beforeunload.
This blocks the page from closing until the server acknowledges
the stopped state, ensuring the NowPlaying entry is always removed.
* fix(ui): fix confirmation dialog and use fetch keepalive for tab close
- Move e.preventDefault() before the stopped report so the dialog
always shows regardless of XHR errors
- Use fetch with keepalive:true instead of sync XHR (more reliable,
non-blocking, survives page teardown)
- Fall back to sendBeacon if fetch throws
* fix(ui): prevent heartbeat from re-adding entry after stopped on tab close
Set a stoppedRef flag in beforeunload so the heartbeat interval
skips sending playing reports after stopped has been sent.
Without this, the heartbeat could re-register the NowPlaying
entry after the stopped event removed it.
* fix(ui): include client unique ID header in stopped report on tab close
Root cause: reportPlaybackSync (fetch keepalive) did not include the
X-ND-Client-Unique-Id header. Regular reportPlayback calls via
httpClient include this header, and the server uses it as the playMap
key. Without the header, the stopped call fell back to player.ID
as the key, which didn't match the entry added with the UUID key.
The playMap.Remove targeted the wrong key, so the entry persisted.
Fix: export clientUniqueId from httpClient and include it as a header
in the fetch keepalive request.
* fix(ui): use pagehide for stopped report to avoid premature send
beforeunload fires before the confirmation dialog, so the stopped
event was sent even when the user cancelled closing. Move the
stopped report to pagehide, which only fires when the page is
actually being unloaded (after confirmation).
* feat(server): broadcast NowPlaying SSE on every state change
Previously, the SSE broadcast only fired when the NowPlaying count
changed. Now it fires on every reportPlayback call (starting,
playing, paused, stopped), so the NowPlaying panel gets instant
updates for state transitions and position changes.
The UI reducer stores a nowPlayingLastUpdate timestamp alongside
the count, ensuring every SSE event triggers a re-fetch even when
the count is unchanged (e.g., pause/resume).
* fix(ui): clamp NowPlaying position to prevent negative time display
* fix(ui): debounce NowPlaying fetches to prevent progress bar trembling
During track changes, rapid SSE events (stopped, starting, playing)
triggered multiple refetches within milliseconds, each resetting the
interpolation base and causing the progress bar to oscillate. Skip
fetches within 1 second of the previous fetch.
* feat(ui): report playback position on seek
Send a reportPlayback(playing) call when the user seeks/scrubs in
the player, so the NowPlaying panel and server position stay in
sync immediately instead of waiting for the next 60s heartbeat.
* refactor: code review cleanup
- Export clientUniqueIdHeader from httpClient, use in subsonic layer
- Fix variable shadowing (now → fetchNow) in NowPlayingPanel fetchList
- Fix onBeforeDestroy nested dep (read isRadio from ref instead)
- Only broadcast SSE on state transitions, not heartbeat position updates
- Only enqueue NowPlaying to external scrobblers on state transitions
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(ui): use trailing-edge debounce for NowPlaying fetch
Replace the leading-edge throttle (which fetched on the first event
and blocked subsequent ones) with a trailing-edge debounce (300ms).
During track transitions, the burst of events (stopped → starting →
playing) now collapses into a single fetch after the burst settles,
showing the new track immediately instead of briefly showing empty.
* fix(ui): only show overlay on NowPlaying artwork when paused
Signed-off-by: Deluan <deluan@navidrome.org>
* refactor(ui): remove unnecessary sendBeacon fallback from reportPlaybackSync
* refactor(ui): rename reportPlaybackSync to reportPlaybackKeepalive
The function was never synchronous — it uses fetch with keepalive:true,
which is fire-and-forget. The name now reflects the actual behavior.
* style: format code with prettier
* test: add tests for reportPlayback SSE broadcast and UI changes
- play_tracker: verify SSE broadcast on every state transition and
that broadcasts are skipped when EnableNowPlaying is false
- activityReducer: verify nowPlayingLastUpdate timestamp is set
- subsonic/index: verify reportPlayback URL construction
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(ui): prevent NowPlaying from fetching every second when panel is open
fetchList had unstable identity because it depended on doFetch
(which depended on notify/dispatch). Each 1s setNow re-render
recreated the callback chain, re-triggering the useEffect that
calls fetchList. Use a ref for the fetch logic so fetchList has
a stable identity with empty deps.
* fix(ui): break fetch→dispatch→effect→fetch loop in NowPlaying panel
The fetch dispatched nowPlayingCountUpdate on every result, which
updated nowPlayingLastUpdate in Redux, which triggered the SSE
effect to call fetchList again — creating a fetch loop.
Fix: remove dispatch from fetch results. The badge count uses
entries.length (from local state) when entries are loaded, falling
back to Redux count (from SSE) when they aren't. SSE events remain
the only trigger for nowPlayingLastUpdate, breaking the loop.
* fix(ui): clear NowPlaying entries on panel close so badge uses SSE count
* style: format code with prettier
* fix: address code review feedback
- Fix currentTime truthiness check to handle position 0 correctly
- Report actual player state (playing/paused) on seek instead of
always sending 'playing'
- Remove idx from React key to avoid reorder issues
- Add debounce timer cleanup on unmount
- Keep entries on panel close so badge stays accurate from polling
- Fix test description to match actual assertion
* fix(ui): keep NowPlaying badge count accurate from polling
Add a separate nowPlayingCountSync action that updates the Redux
count without setting nowPlayingLastUpdate (which would trigger
the SSE effect and cause a fetch loop). Polling results now sync
the badge count via this action, so the badge stays accurate even
when SSE is unavailable.
* style: format code with prettier
---------
Signed-off-by: Deluan <deluan@navidrome.org>
* feat(req): add Float64Or helper for parsing float query params
* feat(scrobbler): extend NowPlayingInfo with state/position/rate fields
* feat(scrobbler): implement ReportPlayback with state machine and auto-scrobble
* feat(responses): add state/positionMs/playbackRate to NowPlayingEntry
* feat(subsonic): add reportPlayback endpoint handler
* feat(subsonic): include state/positionMs/playbackRate in getNowPlaying response
* feat(subsonic): register playbackReport OpenSubsonic extension
* test(e2e): add reportPlayback endpoint e2e tests
* refactor(scrobbler): simplify ReportPlayback — extract helpers, remove duplication
- Add state constants and exported ValidStates map
- Extract remainingTTL() helper (was duplicated 3x)
- Merge playing/paused switch cases into single branch
- Use Get instead of GetWithParticipants for non-stopped states
- Guard NowPlayingCount broadcast with count-change detection
- Use cache entry for NowPlaying dispatch instead of extra DB query
- Remove redundant Position field from NowPlayingInfo
* refactor(scrobbler): skip DB query in playing/paused when playMap has entry
* fix(play_tracker): handle errors when adding/updating NowPlayingInfo in cache
Signed-off-by: Deluan <deluan@navidrome.org>
* refactor(play_tracker): replace sort with slices.SortFunc for NowPlayingInfo
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(play_tracker): check all ReportPlayback errors in tests
Replace _ = with explicit error assertions to avoid masking
failures in intermediate calls.
Signed-off-by: Deluan <deluan@navidrome.org>
* test(e2e): use real PlayTracker and assert getNowPlaying after reportPlayback
Replace noopPlayTracker with a real PlayTracker backed by the E2E
database. E2E tests now verify the full round-trip: reportPlayback
creates/updates/removes entries visible via getNowPlaying, including
state, positionMs, and playbackRate fields.
Export NewPlayTracker constructor for use outside the scrobbler package.
* fix(play_tracker): account for playback rate in TTL and detect track switches
The remainingTTL function now divides remaining time by the playback rate,
so cache entries expire correctly at non-1x speeds (e.g., 2x playback halves
the TTL). Zero/negative rates default to 1.0. The playing/paused case now
checks if the cached MediaFile ID matches the reported mediaId, falling back
to a DB fetch when the client switches tracks without sending stopped/starting.
Adds parameterized tests for remainingTTL covering rate variations and edge cases.
* fix(subsonic): validate positionMs and playbackRate in reportPlayback
Reject negative positionMs values and invalid playbackRate values (NaN,
Inf, zero, negative) at the API boundary before they reach TTL and
position estimation math. Returns clear error messages for each case.
* feat(play_tracker): add ClientId and ClientName to ReportPlayback parameters
Signed-off-by: Deluan <deluan@navidrome.org>
* refactor(play_tracker): replace NowPlaying method with ReportPlayback calls
Signed-off-by: Deluan <deluan@navidrome.org>
* refactor(play_tracker_test): remove redundant TTL behavior tests and clean up mockPluginLoader
Signed-off-by: Deluan <deluan@navidrome.org>
---------
Signed-off-by: Deluan <deluan@navidrome.org>
When a user played an album, advanced a few tracks, closed the player,
then played a different album, playback started mid-album at the
previous track index instead of track 1.
The root cause was in reduceSyncQueue: the hasPendingSwitch check
compared playIndex against savedPlayIndex, but after clearQueue both
reset to 0, making the check falsely conclude no switch was pending.
This caused PLAYER_SYNC_QUEUE to prematurely clear the playIndex and
clear flags before the music player library could act on them.
Fix: also treat clear=true as a signal that a track switch is pending,
since it means a new queue was just loaded.
* fix(ui): show album tile actions on keyboard focus - #4836
The album grid tile bar (containing play/heart/context-menu buttons) had
opacity:0 by default and only became visible on mouse :hover. Keyboard
users tabbing through the album grid never saw which tile was focused
and could not discover the available actions.
Mirrors the existing :hover rule with :focus-within, which matches when
the link itself or any descendant (e.g. the play button) has focus.
Signed-off-by: Daniel Banariba <banaribad@gmail.com>
* fix(ui): also disable pointer events on hidden album tile bar - #4836
Per review feedback (@gemini-code-assist): the tileBar's buttons remained
clickable even at opacity:0, causing accidental Play/Menu triggers when a
user clicked what looked like the album cover.
Set 'pointerEvents: none' on the base tileBar and restore 'auto' on the
same selector that turns it visible.
Signed-off-by: Daniel Banariba <banaribad@gmail.com>
---------
Signed-off-by: Daniel Banariba <banaribad@gmail.com>
Rename FieldInfo.Name to Alias (only meaningful for backward-compat
entries like albumtype→releasetype) and FieldInfo.alias to tagAlias
(tag names from mappings.yml that resolve to existing fields). Add a
Name() method that derives the canonical name from the map key,
eliminating 60+ redundant Name declarations where the value matched
the key. LookupField now populates the private name field automatically.
Signed-off-by: Deluan <deluan@navidrome.org>
Expose the four ReplayGain database columns (rg_album_gain, rg_album_peak,
rg_track_gain, rg_track_peak) as first-class numeric criteria fields for
smart playlists. This allows users to filter tracks by ReplayGain values,
e.g. finding tracks with album gain below a threshold.
* feat(smartplaylist): add IsMissing and IsPresent operator types
Add two new Expression types for detecting absent/present tags and
roles in smart playlist criteria. Includes JSON marshal/unmarshal
support and Walk visitor registration.
* test(smartplaylist): add JSON marshal/unmarshal tests for isMissing/isPresent
* feat(smartplaylist): add SQL generation for isMissing/isPresent operators
Tags check json_tree(media_file.tags) for key existence.
Roles check json_tree(media_file.participants) for key existence.
Regular DB column fields are rejected with an error.
* test(smartplaylist): add e2e tests for isMissing/isPresent operators
Tests cover tag presence/absence with selective matching (grouping),
universal absence (lyricist role), universal presence (composer role),
and combined operator usage.
* refactor(smartplaylist): use strconv.ParseBool in IsTruthy
Replace hand-rolled string truthiness check with strconv.ParseBool,
which correctly handles standard boolean strings and rejects
unrecognized values as false.
* refactor(smartplaylist): clarify missingExpr parameter naming
Rename defaultNegate to checkAbsence and extract truthy local for
readability. The XNOR logic (checkAbsence == truthy) is now easier
to follow: isMissing passes true, isPresent passes false.
* refactor(smartplaylist): reuse jsonExpr in missingExpr, improve errors
- tagCond/roleCond now handle nil cond (existence-only check)
- missingExpr delegates to jsonExpr(info, nil, negate) instead of
building SQL manually
- Better error messages: unknown fields now report the field name
When clearing the queue, the reducer resets to initialState which lacks
an autoPlay field (undefined). The autoPlay option was computed as true
because undefined !== false, causing the music player library to attempt
playback of the first song before internal state was fully cleared.
Added a queue.length > 0 guard to the autoPlay calculation so it is
never true when the queue is empty, regardless of other state flags.
Fixes#5331
* fix(test): enable Subsonic response snapshot tests on Windows
Replaced cupaloy with a simple custom snapshot matcher that normalizes
CRLF line endings before comparison. The tests were skipped on Windows
via a //go:build unix tag because Git for Windows checks out snapshot
files with CRLF, while Go's xml/json.MarshalIndent always produces LF,
causing direct string comparison to fail. The new matcher reads snapshot
files with os.ReadFile and normalizes \r\n to \n before comparing.
Also added a .gitattributes in the .snapshots directory to enforce LF
checkout, and removed the now-unused cupaloy dependency.
* fix(test): add UPDATE_SNAPSHOTS support to custom snapshot matcher
Restore the ability to update snapshots via `make snapshots`
(UPDATE_SNAPSHOTS=true), which was lost when replacing cupaloy
with the custom matcher.
* fix(sharing): validate JWT expiration and share existence on stream endpoint
The public stream endpoint (/public/s/{token}) was using
TokenAuth.Decode() which only verifies the JWT signature but skips
exp claim validation. This allowed expired share stream URLs to remain
functional indefinitely. Additionally, deleting a share did not revoke
previously issued stream tokens since the handler never performed a
server-side share lookup.
Fixed by switching decodeStreamInfo() to use auth.Validate() which
properly checks the exp claim, and by embedding the share ID ("sid")
in stream tokens so the handler can verify the share still exists.
Old tokens without the sid claim remain backward compatible but still
benefit from expiration validation.
* fix(sharing): check share expiration on stream requests
Replace the lightweight Exists() check with Get() + expiration
validation, so that shares whose ExpiresAt was updated to an earlier
time after token issuance are also rejected (410 Gone). Reuses the
existing checkShareError handler for consistent error responses.
* feat(ui): add Not Starred filter option - #5108
Signed-off-by: Daniel Banariba <banaribad@gmail.com>
* fix(ui): apply notStarred translation to playlistTrack resource - #5108
Signed-off-by: Daniel Banariba <banaribad@gmail.com>
* refactor(ui): use NullableBooleanInput for starred filter - #5108
Replace QuickFilter approach with NullableBooleanInput per maintainer
review feedback. Single tri-state filter (Yes/No/Any) instead of two
separate buttons + dataProvider translation. Matches the existing pattern
used by the 'missing' filter.
Signed-off-by: Daniel Banariba <banaribad@gmail.com>
---------
Signed-off-by: Daniel Banariba <banaribad@gmail.com>
Co-authored-by: Deluan Quintão <deluan@navidrome.org>
* feat(plugins): add sonicSimilarity capability types
Defines the SonicSimilarity plugin capability interface with
GetSonicSimilarTracks and FindSonicPath methods, along with
their request/response types.
* feat(sonic): add core sonic similarity service
Implements the Sonic service with HasProvider, GetSonicSimilarTracks,
and FindSonicPath, delegating to the PluginLoader and using the
Matcher for index-preserving library resolution.
* test(sonic): add sonic service unit tests
Covers HasProvider, GetSonicSimilarTracks, and FindSonicPath with
mock plugin loader and provider, verifying error propagation and
successful match resolution via the library matcher.
* feat(matcher): add MatchSongsToLibraryMap for index-preserving matching
Adds a new method alongside MatchSongsToLibrary that returns a
map[int]MediaFile keyed by input song index rather than a flat slice,
enabling callers to correlate similarity scores back to the original
position in the results.
* fix(sonic): check provider availability before MediaFile lookup
Avoids unnecessary DB call when no plugin is available, and ensures
the correct error path is tested.
* feat(plugins): add sonic similarity adapter
Adds SonicSimilarityAdapter implementing sonic.Provider, bridging the
plugin system to the core sonic service via Extism plugin functions.
Reuses existing songRefsToAgentSongs helper for SongRef conversion.
* feat(plugins): add LoadSonicSimilarity to plugin manager
Adds Manager.LoadSonicSimilarity method following the pattern of
LoadLyricsProvider, enabling the core sonic service to load a
SonicSimilarityAdapter from a named plugin.
* feat(subsonic): add sonicMatch response type
Add SonicMatch struct with Entry and Similarity fields, and a SonicMatches slice to the Subsonic response struct. These types support the OpenSubsonic sonicSimilarity extension for returning similarity-scored track results.
* feat(subsonic): add getSonicSimilarTracks and findSonicPath handlers
Add two new Subsonic API handlers for the sonicSimilarity OpenSubsonic extension: GetSonicSimilarTracks returns similarity-scored tracks similar to a given song, and FindSonicPath returns a path of tracks connecting two songs. Both handlers delegate to the sonic core service and map results to SonicMatch response types.
* feat(subsonic): advertise sonicSimilarity extension when plugin available
Update GetOpenSubsonicExtensions to conditionally include the sonicSimilarity extension only when a sonic similarity plugin provider is available. The nil guard ensures backward compatibility with tests that pass nil for the sonic field. Also update the existing test to pass the new nil parameter.
* feat(subsonic): wire sonic similarity service into router
Add the sonic.Sonic service to the Router struct and New() constructor, register the getSonicSimilarTracks and findSonicPath routes, and wire sonic.New and its PluginLoader binding into the Wire dependency injection graph. Update all existing test call sites to pass the new nil parameter. Regenerate wire_gen.go.
* fix(e2e): add sonic parameter to subsonic.New call in e2e tests
* test(subsonic): add sonicSimilarity extension advertisement tests
Restructures the GetOpenSubsonicExtensions test into two contexts: one verifying the baseline 5 extensions are returned when no sonic similarity plugin is configured, and one verifying that the sonicSimilarity extension is advertised (making 6 total) when a plugin loader reports an available provider. Adds a mockSonicPluginLoader to satisfy the sonic.PluginLoader interface without requiring a real plugin.
* feat(subsonic): add nil guard and e2e tests for sonic similarity endpoints
Handlers return ErrorDataNotFound when no sonic service is configured,
preventing nil panics. E2e tests verify both endpoints return proper
error responses when no plugin is available.
* fix(subsonic): return HTTP 404 when no sonic similarity plugin available
Endpoints are always registered but return 404 when no provider is
available, rather than a subsonic error code 70.
* refactor: clean up sonic similarity code after review
Extract shared helpers to reduce duplication across the sonic similarity
implementation: loadAllMatches in matcher consolidates the 4-phase
matching pipeline, songRefToAgentSong eliminates per-iteration slice
allocation in the adapter, sonicMatchResponse deduplicates response
building in handlers, and a package-level constant replaces raw
capability name strings in core/sonic.
* fix empty response shapes
Signed-off-by: Deluan <deluan@navidrome.org>
* test(plugins): add testdata plugin and e2e tests for sonic similarity
Add a test-sonic-similarity WASM plugin that implements both
GetSonicSimilarTracks and FindSonicPath via the generated sonicsimilarity
PDK. The plugin returns deterministic test data with decreasing similarity
scores and supports error injection via config. Adapter tests verify the
full round-trip through the WASM plugin including error handling. Also
includes regenerated PDK code from make gen.
* docs: update README to include new capabilities and usage examples for plugins
Signed-off-by: Deluan <deluan@navidrome.org>
* test(e2e): enhance sonic similarity tests with additional scenarios and mock provider
Signed-off-by: Deluan <deluan@navidrome.org>
* fix: address PR review feedback for sonic similarity
Fix incorrect field names in README documentation ({from, to} →
{startSong, endSong}) and remove unnecessary XML serialization test
from e2e suite since OpenSubsonic endpoints only use JSON.
* refactor: rename Matcher methods for conciseness
Rename MatchSongsToLibrary to MatchSongs and MatchSongsToLibraryMap to
MatchSongsIndexed. The Matcher receiver already establishes the "to
library" context, making that suffix redundant, and "Indexed" better
describes the intent (preserving input ordering) than "Map" which
describes the data structure.
* refactor: standardize variable naming for media files in sonic path methods
Signed-off-by: Deluan <deluan@navidrome.org>
* refactor: simplify plugin loading by introducing adapter constructors
Signed-off-by: Deluan <deluan@navidrome.org>
---------
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(playlists): allow toggling auto-import (sync) via REST API
The updatePlaylistEntity handler was not applying the sync field from
incoming requests, causing the auto-import toggle in the UI to have no
effect. Apply the sync value for file-backed playlists only.
* fix(playlists): enhance update logic for playlist metadata and sync toggle
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(playlists): address code review feedback
- Add pointer equality short-circuit in rulesEqual before reflect.DeepEqual
- Guard against empty ID in Put's partial-update path
- Only apply Sync when it actually differs from current value, preventing
zero-value overwrites from partial payloads
* fix(playlists): remove unused parameters from Update method
Signed-off-by: Deluan <deluan@navidrome.org>
---------
Signed-off-by: Deluan <deluan@navidrome.org>
* test(artwork): add e2e suite documenting album/disc resolution
Adds core/artwork/e2e/ with a real-tempdir + scanner harness that exercises
artwork resolution end-to-end. Covers album and disc kinds; pending (PIt)
cases document two known bugs in reader_album.go for regression-guard
flipping once they are fixed.
* refactor(artwork): add libraryFS helper to resolve MusicFS for a library
* test(artwork): tighten libraryFS test isolation and add scheme-error case
* test(artwork): update libraryFS test description to match implementation
* refactor(artwork): convert fromExternalFile to use fs.FS
Add a temporary fromExternalFileAbs shim so existing absolute-path callers
still compile; the shim is removed once all readers are migrated.
* refactor(artwork): make fromExternalFileAbs a thin delegator
Introduce a minimal osDirectFS adapter so the shim no longer duplicates
the matching loop. Both will be removed in Task 9.
* refactor(artwork): convert fromTag to taglib.OpenStream over fs.FS
Add a temporary fromTagAbs shim so existing absolute-path callers still
compile; removed in Task 9. Reuses the osDirectFS adapter from Task 2.
* refactor(artwork): defer fs.File close until after taglib reads finish
Mirror the lifetime pattern used by adapters/gotaglib/gotaglib.go:
keep the underlying fs.File open until taglib.File is closed, and
pass WithFilename so format detection doesn't rely on content sniffing.
* docs(artwork): note ffmpeg's path-based API limitation
* refactor(artwork): migrate album reader to MusicFS
- Add libFS (storage.MusicFS) field to albumArtworkReader; resolved
once at construction time via libraryFS()
- Switch fromCoverArtPriority from abs-path shims to FS-based
fromTag/fromExternalFile; only fromFFmpegTag retains absolute path
- Build imgFiles as library-relative forward-slash paths in
loadAlbumFoldersPaths using path.Join(f.Path, f.Name, img)
- Guard embedAbs so that an empty EmbedArtPath never produces a
non-empty absolute path (prevents accidental ffmpeg invocation)
- Register testfile:// storage scheme in artwork test suite to provide
an os.DirFS-backed MusicFS without requiring the taglib extractor
- Update test assertions from filepath.FromSlash(abs) to bare
forward-slash relative strings
* fix(artwork): use path package in compareImageFiles for forward-slash relative paths
* refactor(artwork): migrate disc reader to MusicFS
Replace os.Open absolute-path access with libFS.Open on library-relative
forward-slash paths. Rename discFolders→discFoldersRel, split
firstTrackPath into firstTrackRelPath (for fromTag) and firstTrackAbsPath
(for fromFFmpegTag), and switch path.Dir/Base/Ext for forward-slash safety.
* refactor(artwork): build discFoldersRel directly and guard empty first track
* refactor(artwork): migrate mediafile reader to MusicFS
* refactor(artwork): migrate artist album-art lookup to MusicFS
* refactor(artwork): remove temporary path-based shims
All readers now use the FS-based fromTag and fromExternalFile directly,
so the absolute-path adapters and the osDirectFS helper that backed
them can go away.
* test(artwork): rewrite e2e suite to use storagetest.FakeFS
Switches from real-tempdir + local storage to FakeFS via the storage
registry. Adds a proper multi-disc scenario using the disc tag, which
previously required curated MP3 fixtures we did not have.
* test(artwork): use maps.Copy in trackFile tag merge
Lint cleanup: replace the manual map-copy loop flagged by mapsloop.
* test(artwork): reuse tests.MockFFmpeg in e2e harness
Replace the hand-rolled noopFFmpeg stub with tests.NewMockFFmpeg, which
already satisfies the full ffmpeg.FFmpeg interface and won't drift when
new methods are added. Also tie imageBytes to imageFile so they cannot
silently disagree on the on-disk encoding.
* test(artwork): add e2e scenarios from artwork documentation
Covers the behaviors documented at
https://www.navidrome.org/docs/usage/library/artwork/:
- Album: folder.*/front.* fallbacks and priority order with cover.*.
- Disc: cd*.* match, cover.* inside disc folder, DiscArtPriority="" skip
path, the documented multi-disc layout, and the discsubtitle keyword.
- MediaFile: disc-level fallback for multi-disc tracks and album-level
fallback for single-disc tracks (doc section "MediaFiles" items 2-3).
- Artist: album/artist.* lookup via libFS (passes). The artist-folder
branch is XIt-marked because fromArtistFolder still calls os.DirFS
directly on an absolute path and can't read from a FakeFS-backed
library — migrating that to storage.MusicFS is a follow-up.
Signed-off-by: Deluan <deluan@navidrome.org>
* refactor(artwork): scope artist folder traversal to library root
Route fromArtistFolder reads through storage.MusicFS and bound the
parent-directory walk at the library root. This keeps artwork
resolution scoped to the configured library and unblocks FakeFS-backed
e2e scenarios that depend on the artist folder.
Also consolidate the libraryFS + core.AbsolutePath pairing (used by
three readers) into a single libraryFSAndRoot helper.
* test(artwork): add ASCII file-tree diagrams to e2e scenarios
Each It/PIt block now shows the on-disk layout it exercises, with
arrows indicating which file wins (or should win, for the known-bug
PIt cases). Makes scenarios readable at a glance without having to
parse the MapFS map.
* test(artwork): add e2e tests for playlist and radio artwork resolution
Signed-off-by: Deluan <deluan@navidrome.org>
* test(artwork): enhance e2e tests with real MP3 fixtures for embedded artwork
Signed-off-by: Deluan <deluan@navidrome.org>
* test(ffmpeg): add support for animated WebP encoder detection and fallback handling
Signed-off-by: Deluan <deluan@navidrome.org>
* test(artwork): cover additional edge cases in e2e suite
Add high-value scenarios uncovered by the existing specs:
- Album: three-way basename tie (unsuffixed wins), unknown pattern in
CoverArtPriority is skipped, embedded-first with no embedded art
falls through.
- Disc: discsubtitle with no matching image falls through.
- Artist: ArtistArtPriority can reach images via album/<pattern>.
- Playlist: generates a 2x2 tiled cover from album art when the playlist
has no uploaded/sidecar/external image.
New helper realPNG() produces real taglib/image-decodable bytes so the
tiled-cover test can exercise the generator's decode + compose path.
* test(artwork): refactor image upload logic in e2e tests for consistency
Signed-off-by: Deluan <deluan@navidrome.org>
* test(ffmpeg): simplify animated WebP encoder check by removing context parameter
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(artwork): normalize rel path for fs.Glob on Windows
filepath.Rel returns backslash-separated paths on Windows, but fs.Glob
and path.Join require forward slashes. Convert with filepath.ToSlash
after computing the relative path and use path.Dir for the parent walk
so the artist-folder lookup works cross-platform.
* fix(ffmpeg): retry animated WebP probe on transient failure
The probe previously used the caller's request context inside sync.Once,
so a single cancelled first request would permanently disable animated
WebP for the rest of the process. Switch to a mutex + probed flag, use
a fresh background context with its own timeout, and only cache the
result when the probe actually succeeds.
* test(ffmpeg): reset ffOnce so ConvertAnimatedImage test is order-independent
The ConvertAnimatedImage stand-in test sets ffmpegPath directly but
does not reset ffOnce. If ffmpegCmd() has not been called earlier in
the test process, the next call inside hasAnimatedWebPEncoder runs
ffOnce.Do and re-resolves the real ffmpeg binary, overwriting the
stand-in and breaking the test. Reset ffOnce and conf.Server.FFmpegPath
alongside the other globals to pin resolution to the stand-in.
* test(artwork): unblock Windows CI — forward-slash fs paths and suite-level DB lifetime
The internal artwork test planted a Windows absolute path (backslashes) into
Folder.Path and then fed it through libFS.Open, which fs.ValidPath rejects.
Rooting the testfile library at the temp dir directly and using
filepath.ToSlash keeps the path model library-relative and forward-slash,
matching production.
The e2e suite opened a per-spec DB in a per-spec TempDir, but the go-sqlite3
singleton kept the file open across specs. Ginkgo's per-spec TempDir cleanup
then tried to unlink a file still held by that handle — fine on POSIX, fails
on Windows. Moving the DB to a suite-level tempdir and closing it in
AfterSuite avoids the race.
* test(artwork): keep Windows drive letters intact in testfile library URLs
url.Parse on `testfile://C:/path` reads `C` as the host and the path loses
the drive letter, so Windows libFS lookups go to `/path` and fail.
testFileLibPath now prepends a `/` when the OS path has no leading slash,
and the testfile constructor strips that extra slash back off before
handing the path to os.Stat / os.DirFS.
* refactor(artwork): consolidate libFS + root into libraryView helper
Collapses the per-reader libFS/libPath/rootFolder/firstTrackAbsPath fields
into a single libraryView{FS, absRoot} with an Abs(rel) method. Also folds
the two library lookups (ds.Library.Get + core.AbsolutePath) into one, and
uses mf.Path directly instead of stripping libRoot off an absolute path.
* refactor(ffmpeg): replace hasAnimatedWebPEncoder with encoderProbe for state management
Signed-off-by: Deluan <deluan@navidrome.org>
* fix: escape artist folder names in artwork glob
Escape glob metacharacters in the library-relative artist folder path before composing the fs.Glob pattern for artist image lookup. This preserves literal folder names such as Artist [Live] while keeping the configured filename pattern behavior unchanged, and adds a regression test for bracketed artist folders.
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(artwork): correct test path assertions after MusicFS migration
Source functions (fromTag, fromExternalFile) now return forward-slash
fs.FS-relative paths, so test assertions should compare against plain
forward-slash strings, not filepath.FromSlash(). The artistArtPriority
test needs filepath.FromSlash() on the suffix because findImageInFolder
returns OS-native absolute paths via filepath.Join.
* fix(artwork): normalize path separators in artistArtPriority assertion
The two table entries exercise different code paths: entry 1 goes through
fromArtistFolder (returns OS-native paths via filepath.Join), while entry 2
goes through fromExternalFile (returns forward-slash fs.FS paths). Using
filepath.FromSlash on the expected value only works for entry 1.
Normalize the actual path to forward slashes with filepath.ToSlash so a
single HaveSuffix assertion works for both code paths on all platforms.
---------
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(test): enable artwork tests on Windows by using OS-aware path assertions
Replace hardcoded forward-slash path expectations with filepath.FromSlash()
so assertions match OS-native separators on Windows. Removes all 8
SkipOnWindows("#TBD-path-sep-artwork") guards from artwork unit tests.
* test: add comment explaining forward-slash paths in test fixtures
Add LibraryID field to TrackInfo so plugins with library filesystem access
can determine which library a track belongs to. This lets plugins resolve
the full filesystem path by combining the library's root path with the
track's relative path. LibraryID is gated behind the same filesystem
access permission check as Path.
* test: add tests for recordingdate alias resolution in smart playlists
Signed-off-by: Deluan <deluan@navidrome.org>
* refactor: update FieldInfo structure and simplify fieldMap initialization
Signed-off-by: Deluan <deluan@navidrome.org>
* refactor: move sort parsing logic from persistence to criteria package
Extracted sort field parsing, validation, and direction handling from
persistence/criteria_sql.go into model/criteria/sort.go. The new
OrderByFields method on Criteria parses the Sort/Order strings into
validated SortField structs (field name + direction), resolving aliases
and handling +/- prefixes and order inversion. The persistence layer now
consumes these parsed fields and only handles SQL expression mapping.
This centralizes sort parsing to enforce consistent implementations.
* refactor: standardize field access in smartPlaylistCriteria structure
Signed-off-by: Deluan <deluan@navidrome.org>
* refactor: add ResolveLimit method to Criteria
Moved the percentage-limit resolution logic from playlist_repository
into Criteria.ResolveLimit, replacing the 3-line mutate-after-query
pattern with a single method call. The method preserves LimitPercent
rather than zeroing it, since IsPercentageLimit already returns false
once Limit is set, making the clear redundant and lossy.
* refactor: improve child playlist loading and error handling in refresh logic
Signed-off-by: Deluan <deluan@navidrome.org>
* refactor: extract smart playlist logic to dedicated files
Moved refreshSmartPlaylist, addSmartPlaylistAnnotationJoins, and
addCriteria methods from playlist_repository.go to a new
smart_playlist_repository.go file. Extracted all smart playlist tests
to smart_playlist_repository_test.go. Added DeferCleanup to the
"valid rules" test to fix ordering flakiness when Ginkgo randomizes
test execution across files.
* refactor: break refreshSmartPlaylist into smaller focused methods
Split the monolithic refreshSmartPlaylist method into discrete helpers
for readability: shouldRefreshSmartPlaylist for guard checks,
refreshChildPlaylists for recursive dependency refresh,
resolvePercentageLimit for count-based limit resolution,
buildSmartPlaylistQuery for assembling the SELECT with joins, and
addMediaFileAnnotationJoin to DRY up the repeated annotation join clause.
* refactor: deduplicate child playlist IDs in Criteria
Signed-off-by: Deluan <deluan@navidrome.org>
* refactor: simplify withSmartPlaylistOwner to accept model.User
Replaced separate ownerID string and ownerIsAdmin bool parameters with a
single model.User struct, reducing the field count in smartPlaylistCriteria
and making the option function signature clearer. Updated all call sites
and tests accordingly.
* fix: handle empty sort fields and propagate child playlist load errors
OrderByFields now falls back to [{title, asc}] when all user-supplied
sort fields are invalid, preventing empty ORDER BY clauses that would
produce invalid SQL in row_number() window functions. Also restored the
original behavior where a DB error loading child playlists aborts the
parent smart playlist refresh, by making refreshChildPlaylists return a
bool.
* refactor: log warning when no valid sort fields are found
Signed-off-by: Deluan <deluan@navidrome.org>
---------
Signed-off-by: Deluan <deluan@navidrome.org>
Replaced the Fields() type switch with a fields() method on the
Expression interface, eliminating the need to update a central switch
when adding new expression types. Removed the now-redundant
criteriaExpression() marker method since fields() alone suffices to
restrict the interface. Extracted a conjunction interface for the
ChildPlaylistIds() lookup used by All and Any.
* refactor: rename ImportFile to ImportFromFolder in playlists service
* feat: add ImportFile method with library/folder resolution
* feat: allow sync flag upgrade on re-import of non-synced playlists
* feat: add pls export subcommand with bulk and single export
Add `navidrome pls export` command that supports:
- Single playlist export to stdout (-p flag only)
- Single playlist export to directory (-p and -o flags)
- Bulk export of all playlists to a directory (-o flag only)
- Filtering by user (-u flag)
- Automatic filename sanitization and collision detection
Also extracts findPlaylist helper from runExporter for reuse.
* feat: add pls import subcommand with sync flag support
* fix: improve error message for export without output directory
* test: add tests for ImportFile sync flag and sync upgrade behavior
* refactor: streamline export and import logic by removing redundant comments and improving library path matching
Signed-off-by: Deluan <deluan@navidrome.org>
* feat: update ImportFile method to include sync flag for playlist imports
Signed-off-by: Deluan <deluan@navidrome.org>
* feat: implement fetchPlaylists function to streamline playlist retrieval
Signed-off-by: Deluan <deluan@navidrome.org>
* feat: replace inline filename sanitization with centralized utility function
Signed-off-by: Deluan <deluan@navidrome.org>
* feat: refactor playlist import logic to consolidate sync handling and improve method signatures
Signed-off-by: Deluan <deluan@navidrome.org>
* fix: address code review feedback on playlist import/export
- Fix duplicate playlist creation on non-sync re-import: only reconcile
sync flag when the playlist was actually persisted (has an ID)
- Distinguish "not in any library" from real errors in resolveFolder
using a sentinel error, so DB/folder errors propagate instead of
falling back to ImportM3U
- Use bufio.Scanner in countM3UTrackLines instead of reading entire file
* feat: replace bufio.Scanner with UTF8Reader and LinesFrom utility for improved file reading
Signed-off-by: Deluan <deluan@navidrome.org>
* fix: record path for outside-library imports to prevent duplicates
Files outside all libraries now go through updatePlaylist with the
absolute path recorded, so re-importing the same file updates the
existing playlist instead of creating a duplicate.
* refactor: name guard condition in updatePlaylist for readability
Extracted the compound boolean expression into a named local variable
`alreadyImportedAndNotSynced` to make the intent of the early-return
guard clearer at a glance.
* add godocs
Signed-off-by: Deluan <deluan@navidrome.org>
---------
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(search): transliterate non-ASCII letters symmetrically in FTS5 path
Songs and artists with letters like ø, æ, œ, ß were unsearchable. The
query path in server/subsonic/searching.go transliterates with
sanitize.Accents (Øystein → Oystein), but the FTS5 tokenizer's
remove_diacritics 2 only strips NFKD-decomposable marks — atomic
letters with built-in strokes/ligatures survive tokenization, so the
query side and index side disagreed.
Apply sanitize.Accents on both sides:
- normalizeForFTS now also emits an ASCII-transliterated form for each
word, so search_normalized contains the variant the query produces.
- buildFTS5Query transliterates the unquoted portion of the input so
every caller (Subsonic, REST fullTextFilter) gets the same handling.
Quoted phrases stay as typed, preserving phrase matches against the
original title/artist columns.
Existing libraries pick up the fix as records are re-scanned; users
can trigger a manual full rescan to refresh older entries.
* fix(search): cache transliteration and add ß/quoted-phrase test coverage
Address review feedback: call sanitize.Accents once per word and reuse
the result for both the punct-stripped and accent-only paths. Add missing
test entries for ß→ss transliteration and quoted Unicode phrase preservation.
---------
Co-authored-by: Claude <noreply@anthropic.com>
* test(e2e): add end-to-end tests for smart playlists functionality
Signed-off-by: Deluan <deluan@navidrome.org>
* fix: enforce playlist visibility in smart playlist InPlaylist/NotInPlaylist rules
Previously, the InPlaylist/NotInPlaylist smart playlist criteria only
allowed referencing public playlists, regardless of who owned the smart
playlist. This was too restrictive for owners referencing their own
private playlists and for admins who should have unrestricted access.
The fix passes the smart playlist owner's identity and admin status into
the criteria SQL builder, so that: admins can reference any playlist,
regular users can reference public playlists plus their own private ones,
and inaccessible referenced playlists produce a warning instead of a hard
error. Also prevents recursive refresh of child playlists the owner
cannot access.
* test(e2e): clarify user roles and fix playlist visibility tests
Renamed testUser/otherUser to adminUser/regularUser to make the admin
vs regular user distinction explicit in test code. Fixed three playlist
visibility tests that were evaluating as admin (bypassing all access
checks) instead of as a regular user, so the public playlist path is
now actually exercised. All playlist operator tests now use explicit
evaluateRuleAs calls with the appropriate user role.
* fix: sync rulesSQL criteria after limitPercent resolution
The rulesSQL struct captures a copy of rules at creation time. When
limitPercent is resolved later, rules.Limit is updated but rulesSQL
still holds the stale value. This caused percentage-based smart playlist
limits to be silently ignored. Fix by updating rulesSQL.criteria after
the resolution.
* refactor: convert inList to a method on smartPlaylistCriteria
The inList function already receives ownerID and ownerIsAdmin from the
smartPlaylistCriteria caller. Making it a method lets it access those
fields directly from the receiver, simplifying the signature and staying
consistent with exprSQL which was already converted to a method.
* refactor: simplify function signatures by removing type parameters in criteria_sql.go
Signed-off-by: Deluan <deluan@navidrome.org>
---------
Signed-off-by: Deluan <deluan@navidrome.org>
* refactor: move criteria SQL generation to persistence
Keep model/criteria as a domain DSL with JSON parsing, field metadata, expression traversal, and child playlist extraction only. Move smart playlist SQL translation, sort SQL, and join planning into persistence behind smartPlaylistCriteria so repository code uses a small query-building API.
* refactor: simplify criteria translator metadata
Use generic helper functions for criteria operator maps so the SQL translator can pass named criteria map types directly. Remove unused pseudo-field metadata from the criteria field API while preserving special field name lookup.
* test: add coverage check for criteria-to-SQL field mappings
Add a test that iterates all fields registered in the criteria package and
verifies that every non-tag/non-role field has a corresponding entry in
the persistence layer's smartPlaylistFields map. This prevents silent
drift between the domain field registry and the SQL translation layer.
Also adds an AllFieldNames() function to the criteria package to support
field enumeration from outside the package.
* test: add smart playlist e2e suite infrastructure
* test: add string field smart playlist e2e tests
* test: add numeric, boolean, tag, participant, annotation, logic, sorting smart playlist e2e tests
* test: add playlist operator smart playlist e2e tests
* test: add isNot and endsWith string field e2e tests
* test: add date/time field smart playlist e2e tests
* fix: add gosec nolint directives for safe SQL concatenation in e2e restore
* refactor: address code review feedback for smart playlist e2e tests
- Deduplicate evaluateRule by delegating to evaluateRuleOrdered
- Cache table list in BeforeSuite instead of querying sqlite_master per test
- Wrap restoreDB in a transaction with defer cleanup for DETACH/foreign_keys
- Use JSON numbers for numeric criteria values to match canonical JSON shape
* refactor: simplify e2e test infrastructure
- Remove unused return value from buildTestFS
- Add deferred ROLLBACK as safety net in restoreDB transaction
- Cache Come Together ID to avoid repeated lookups in BeforeSuite
- Use range-over-int for play count loop
* test: add missing operator coverage to smart playlist e2e tests
Add 4 tests for operators/paths that had no e2e coverage:
- notContains on string fields (LIKE negation path)
- before on date fields (Lt for dates, only after was tested)
- startsWith on tag fields (json_tree + LIKE subquery)
- endsWith on participant/role fields (json_tree + LIKE subquery)
* fix: split html sanitization from plaintext handling
Add a dedicated SanitizeHTML helper for HTML-rendered values so entity-encoded markup is decoded before bluemonday sanitization. Use the new helper for the login welcome message and artist biographies while preserving SanitizeText semantics for lyrics and other plaintext callers. Add regression coverage for both helpers and the serveIndex welcomeMessage path.
* docs: add SanitizeText and SanitizeHTML godoc
Signed-off-by: Deluan <deluan@navidrome.org>
* fix: preserve plain text in artist biographies
Revert artist biography storage to SanitizeText so entity-encoded plain text remains decoded for Subsonic consumers. This avoids double-escaping values like R&B in XML responses while keeping the new welcomeMessage HTML sanitization in place, and adds a regression test covering the biography storage behavior.
---------
Signed-off-by: Deluan <deluan@navidrome.org>
* feat(config): Add EnforceNonRootUser config option to exit early if started as root
Signed-off-by: Aengus Walton <ventolin@gmail.com>
* Move validateEnforceNonRootUser check to directly after parsing the config
* Ensure the data directory hasn't been created in test
---------
Signed-off-by: Aengus Walton <ventolin@gmail.com>
Co-authored-by: Deluan Quintão <deluan@navidrome.org>
* ci(windows): add skeleton go-windows job (compile-only smoke test)
* ci(windows): fix comment to reference Task 7 not Task 6
* ci(windows): harden PATH visibility and set explicit bash shell
* ci(windows): enable full go test suite and ndpgen check
* test(gotaglib): skip Unix-only permission tests on Windows
* test(lyrics): skip Windows-incompatible tests
* test(utils): skip Windows-incompatible tests
* test(mpv): skip Windows-incompatible playback tests
Skip 3 subprocess-execution tests that rely on Unix-style mpv
invocation; .bat output includes \r-terminated lines that break
argument parsing (#TBD-mpv-windows).
* test(storage): skip Windows-incompatible tests
Skip relative-path test where filepath.Join uses backslash but the
storage implementation returns a forward-slash URL path
(#TBD-path-sep-storage).
* test(storage/local): skip Windows-incompatible tests
Skip 13 tests that fail because url.Parse("file://" + windowsPath)
treats the drive letter colon as an invalid port; also skip the
Windows drive-letter path test that exposes a backslash vs
forward-slash normalisation bug (#TBD-path-sep-storage-local).
* test(playlists): skip Windows-incompatible tests
* test(model): skip Windows-incompatible tests
* test(model/metadata): skip Windows-incompatible tests
* test(core): skip Windows-incompatible tests
AbsolutePath uses filepath.Join which produces OS-native path separators;
skip the assertion test on Windows until the production code is fixed
(#TBD-path-sep-core).
* test(artwork): skip Windows-incompatible tests
Artwork readers produce OS-native path separators on Windows while tests
assert forward-slash paths; skip 11 affected tests pending a fix in
production code (#TBD-path-sep-artwork).
* test(persistence): skip Windows-incompatible tests
Skip flaky timestamp comparison (#TBD-flake-persistence) and path-separator
real-bugs (#TBD-path-sep-persistence) in FolderRepository.GetFolderUpdateInfo
which uses filepath.Clean/os.PathSeparator converting stored forward-slash paths
to backslashes on Windows.
* test(scanner): skip Windows-incompatible tests
Skip symlink tests (Unix-assumption), ndignore path-separator bugs
(#TBD-path-sep-scanner) in processLibraryEvents/resolveFolderPath where
filepath.Rel/filepath.Split return backslash paths incompatible with fs.FS
forward-slash expectations, error message mismatch on Windows, and file
format upgrade detection (#TBD-path-sep-scanner).
* test(plugins): skip Windows-incompatible tests
Add //go:build !windows tags to test files that reference the suite
bootstrap (testManager, testdataDir, createTestManager) which is only
compiled on non-Windows. Add a Windows-only suite stub that skips all
specs via BeforeEach to prevent [build failed] on Windows CI.
* test(server): skip Windows-incompatible tests
Skip createUnixSocketFile tests that rely on Unix file permission bits
(chmod/fchmod) which are not supported on Windows.
* test(nativeapi): skip Windows-incompatible tests
Skip the i18n JSON validation test that uses filepath.Join to build
embedded-FS paths; filepath.Join produces backslashes on Windows which
breaks fs.Open (embedded FS always uses forward slashes).
* test(e2e): skip Windows-incompatible tests
On Windows, SQLite holds file locks that prevent the Ginkgo TempDir
DeferCleanup from deleting the DB file. Register an explicit db.Close
DeferCleanup (LIFO before TempDir cleanup) on Windows so the file lock
is released before the temp directory is removed.
* test(windows): fix e2e AfterSuite and skip remaining scanner path test
* test(scanner): skip another Windows path-sep test (#TBD-path-sep-scanner)
* test(subsonic): skip timing-flaky test on Windows (#TBD-flake-time-resolution-subsonic)
* test(scanner): skip 'detects file moved to different folder' on Windows
* test(scanner): consolidate 'Library changes' Windows skips into BeforeEach
* test(scanner): close DB before TempDir cleanup to fix Windows file lock
* test(scanner): skip ScanFolders suite on Windows instead of closing shared DB
* ci: retrigger for Windows soak run 2/3
* ci: retrigger for Windows soak run 3/3
* ci: retrigger for Windows soak run 3/3 (take 2)
* test(scanner): skip Multi-Library suite on Windows (SQLite file lock)
* ci(windows): promote go-windows to blocking status check
* test(plugins): run platform-neutral specs on Windows, drop blanket Skip
* test(windows): make tests cross-platform instead of skipping
- subsonic: back-date submissionTime baseline by 1s so
BeTemporally(">") passes under millisecond clock resolution
- persistence: sleep briefly between Put calls so UpdatedAt is
strictly after CreatedAt on low-resolution clocks
- utils/files: close tempFile before os.Remove so the test works on
Windows (where an open handle holds a file lock)
- tests.TempFile: close the handle before returning; metadata tests
no longer leak the open file into Ginkgo's TempDir cleanup
Resolves Copilot review comments on #5380.
* test(tests): add SkipOnWindows helper to reduce boilerplate
Introduces tests.SkipOnWindows(reason) that wraps the 3-line
runtime.GOOS guard pattern used in every Windows-skipped spec.
* test(adapters): use tests.SkipOnWindows helper
* test(core): use tests.SkipOnWindows helper
* test(model): use tests.SkipOnWindows helper
* test(persistence): use tests.SkipOnWindows helper
* test(scanner): use tests.SkipOnWindows helper
* test(server): use tests.SkipOnWindows helper
* test(plugins): run pure-Go unit tests on Windows
config_validation_test, manager_loader_test, and migrate_test have no
WASM/exec dependencies and don't rely on the make-built test plugins
from plugins_suite_test.go. Let them run on Windows too.
* fix(artwork): return imagesUpdatedAt in LastUpdated when cover art changes
When cover art (cover.jpg) is updated in an album folder, the HTTP
Last-Modified header was incorrectly returning album.UpdatedAt (which
only tracks media file changes) instead of imagesUpdatedAt (which
tracks cover art changes).
This caused browsers to use their cached cover art because the
Last-Modified header didn't change, even though the actual cover art
image data was new (due to cache key changing based on imagesUpdatedAt).
The fix ensures LastUpdated() returns a.lastUpdate (which is the max of
album.UpdatedAt and imagesUpdatedAt) instead of always returning
album.UpdatedAt.
Fixesnavidrome/navidrome#5377
* refactor tests
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(artwork): return imagesUpdatedAt in disc LastUpdated
The discArtworkReader had the same bug as albumArtworkReader (fixed in
9a741859f): LastUpdated() returned album.UpdatedAt while Key() used the
max of album.UpdatedAt and ImagesUpdatedAt. This mismatch caused browsers
to keep stale disc cover art in cache when only the image file changed.
Also strengthen the album LastUpdated tests and add matching tests for
the disc reader. The tests use DescribeTable and were verified to fail
when the fix is reverted.
---------
Signed-off-by: Deluan <deluan@navidrome.org>
Co-authored-by: Deluan <deluan@navidrome.org>
Bump the main module, Dockerfile build stages, and devcontainer to Go
1.26.0. Plugin sub-modules under plugins/ remain on go 1.25 intentionally
(independent modules, untouched in this change).
Also add an explicit actions/setup-go@v6 step (with go-version-file:
go.mod) to the go-lint and go jobs in the CI pipeline. This matches the
golangci-lint-action v4+ requirement that setup-go run before the linter,
and pins the runner Go version to go.mod so CI does not depend on the
ubuntu-latest tools cache picking up Go 1.26.
* feat(docker): add musl build stage for native libwebp support
Add a new build-alpine stage using Alpine/musl with xx cross-compilation,
producing a dynamically-linked musl binary for the Docker image. The
runtime image now installs libwebp, libwebpdemux, and libwebpmux and
creates .so symlinks so gen2brain/webp can detect native libwebp via
purego/dlopen at startup and use it automatically.
The existing Debian/glibc 'build' stage is kept for standalone binary
distribution (darwin, windows, and glibc linux binaries); the Docker
image now ships the musl build from build-alpine instead.
* fix(docker): use dynamic symlinks for libwebp libraries
Avoid hardcoding SONAME versions (.so.7, .so.2, .so.3) which break
on Alpine version bumps. Also fix misleading comment: the musl build
is dynamic (required for purego dlopen), not static.
* feat(docker): enable WebP encoding in Docker environment
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(docker): pin build-alpine stage to Go 1.25 to match base stage
Align the new build-alpine stage with the existing glibc 'base' stage,
both pinned to Go 1.25. Bumping build-alpine independently would create
a version skew between the Docker image binary and the standalone
binaries, which should be avoided unless there is a specific reason.
* fix(docker): harden build-alpine stage (musl pin, -latomic, dynamic-link check)
Address review feedback on the build-alpine stage:
- Pin Go builder to golang:1.25-alpine3.20 so the musl version used at
build time matches the alpine:3.20 runtime image, eliminating any
potential musl ABI skew between builder and runtime.
- Add -extldflags '-latomic' so SQLite's 64-bit atomics resolve when
cross-compiling for 32-bit arm targets (arm/v6, arm/v7).
- Add a build-time check that the produced binary is dynamically
linked (using 'file' from Alpine), failing the build if it is not.
A fully-static binary cannot dlopen libwebp and would silently fall
back to the WASM encoder, defeating the whole point of this stage.
* fix(docker): revert to unpinned golang:1.25-alpine builder
The golang:1.25-alpine3.20 tag suggested during review does not exist on
public.ecr.aws (only 3.21, 3.22, 3.23, and unpinned 'alpine' are
published). Revert to the unpinned 'golang:1.25-alpine' tag so the
Docker build can resolve the base image.
This means the builder's Alpine version can drift relative to the
alpine:3.20 runtime, but in practice musl's backward compatibility
covers this for Navidrome's small dlopen surface (a few libwebp
symbols, no direct libc calls from the dlopen path). If a skew ever
manifests, we can pin both builder and runtime to the same specific
Alpine release in a follow-up.
---------
Signed-off-by: Deluan <deluan@navidrome.org>
* refactor(build): remove CPP taglib adapter
Remove the CGO-based TagLib adapter (adapters/taglib/) and all
cross-taglib build infrastructure. The WASM-based go-taglib adapter
(adapters/gotaglib/) is now the sole metadata extractor.
- Delete adapters/taglib/ (CPP/CGO wrapper)
- Delete .github/actions/download-taglib/
- Remove CROSS_TAGLIB_VERSION, CGO_CFLAGS_ALLOW, and all taglib-related
references from Dockerfile, Makefile, CI pipeline, and devcontainer
* fix(scanner): gracefully fallback to default extractor instead of crashing
Replace log.Fatal with a graceful fallback when the configured scanner
extractor is not found. Instead of terminating the process, the code now
warns and falls back to the default taglib extractor using the existing
consts.DefaultScannerExtractor constant. A fatal log is retained only for
the case where the default extractor itself is not registered, which
indicates a broken build.
* test(scanner): cover default extractor fallback and suppress redundant warn
Address review feedback on the extractor fallback in newLocalStorage:
- Only log the "using default" warning when the configured extractor
differs from the default, so a broken build (default extractor itself
missing) logs only the fatal — not a misleading "falling back" warn
followed immediately by the fatal.
- Add a unit test that registers a mock under consts.DefaultScannerExtractor,
sets the configured extractor to an unknown name, and asserts the local
storage is constructed using the default extractor's constructor.
* refactor: extract matchSongsToLibrary to core/matcher package
Move the song-to-library matching algorithm from core/external into its own
core/matcher package. The Matcher struct exposes a single public method
MatchSongsToLibrary that implements a multi-phase matching algorithm
(ID > MBID > ISRC > fuzzy title+artist). Includes pre-sanitization
optimization for the fuzzy matching loop.
No behavioral changes — the algorithm is identical to the version in
core/external/provider_matching.go.
* refactor: inject matcher.Matcher via Wire instead of creating it inline
Add *matcher.Matcher as a dependency of external.NewProvider, wired via
Google Wire. Update all provider test files to pass matcher.New(ds).
This eliminates tight coupling so future consumers can reuse the matcher
without depending on the external package.
* refactor: remove old provider_matching files
Delete core/external/provider_matching.go and its tests. All matching
logic now lives in core/matcher/.
* test(matcher): restore test coverage lost in extraction
Port back 23 specs that existed in the old provider_matching_test.go
but were dropped during the extraction. Covers specificity levels,
fuzzy matching thresholds, fuzzy album matching, duration matching,
and deduplication edge cases.
* test(matcher): extract matchFieldInAnd/matchFieldInEq helpers
The four inline mock.MatchedBy closures in setupAllPhaseExpectations
all followed the same squirrel.And -> squirrel.Eq -> field-name-check
pattern. Extract into two small helpers to reduce duplication and
make the setup functions read as a concise list of phase expectations.
* refactor(matcher): address PR #5348 review feedback
- sanitizedTrack now holds *model.MediaFile instead of a value copy. Since
MediaFile is a large struct (~74 fields), this avoids the per-track copy
into sanitized[] and a second copy when findBestMatch assigns the winner.
loadTracksByTitleAndArtist updated to iterate by index and pass &tracks[i].
- loadTracksByISRC now sorts results (starred desc, rating desc, year asc,
compilation asc) so that when multiple library tracks share an ISRC the
most relevant one is picked deterministically, matching the sort order
already used by loadTracksByTitleAndArtist.
- Restored the four worked examples (MBID Priority, ISRC Priority,
Specificity Ranking, Fuzzy Title Matching) in the MatchSongsToLibrary
godoc that were dropped during the extraction.
- matcher_test.go: tests now enforce expectations via AssertExpectations in
a DeferCleanup. The old setupAllPhaseExpectations helper was replaced
with per-phase helpers (expectIDPhase/expectMBIDPhase/expectISRCPhase +
allowOtherPhases) so each test deterministically verifies which matching
phases fire. This surfaced (and fixes) a latent issue copilot flagged:
the old .Once() expectations were not actually asserted, so tests would
silently pass even when phases short-circuited unexpectedly.
* feat(config): make max image upload size configurable
Let max image upload size be set from config or environment instead of a fixed 10 MB cap. The upload handler still falls back to 10 MB when MaxImageUploadSize is not set.
Signed-off-by: M8te <38794725+m8tec@users.noreply.github.com>
* feat(config): support human-readable MaxImageUploadSize values
Max image upload size can now be configured as a readable string like 10MB or 1GB instead of raw bytes. The config load validates it at startup, and the upload handler parses it before applying request limits (10MB fallback if it fails).
+ MaxImageUploadSize as human-readable string
+ removed redundant max(1, ...) to address code review
+ cap memory usage of ParseMultipartForm to 10MB (address code review)
Signed-off-by: M8te <38794725+m8tec@users.noreply.github.com>
* refactor(config): consolidate MaxImageUploadSize default and add tests
Move the "10MB" default constant to consts.DefaultMaxImageUploadSize so
both the viper default and the runtime fallback share a single source of
truth. Improve the validator error message with fmt.Errorf wrapping to
match the project convention (e.g. validatePurgeMissingOption). Add unit
tests for validateMaxImageUploadSize (valid/invalid inputs) and
maxImageUploadSize (configured, empty, invalid, raw bytes). Compute
maxImageSize once at handler creation rather than per request.
---------
Signed-off-by: M8te <38794725+m8tec@users.noreply.github.com>
Co-authored-by: Deluan Quintão <deluan@navidrome.org>
* fix(transcoding): clamp target channels to codec limit (#5336)
When transcoding a multi-channel source (e.g. 6-channel FLAC) to MP3, the
decider passed the source channel count through to ffmpeg unchanged. The
default MP3 command path then emitted `-ac 6`, and the template path injected
`-ac 6` after the template's own `-ac 2`, causing ffmpeg to honor the last
occurrence and fail with exit code 234 since libmp3lame only supports up to
2 channels.
Introduce `codecMaxChannels()` in core/stream/codec.go (mp3→2, opus→8),
mirroring the existing `codecMaxSampleRate` pattern, and apply the clamp in
`computeTranscodedStream` right after the sample-rate clamps. Also fix a
pre-existing ordering bug where the profile's MaxAudioChannels check compared
against src.Channels rather than ts.Channels, which would have let a looser
profile setting raise the codec-clamped value back up. Comparing against the
already-clamped ts.Channels makes profile limits strictly narrowing, which
matches how the sample-rate block already behaves.
The ffmpeg buildTemplateArgs comment is refreshed to point at the new upstream
clamp, since the flags it injects are now always codec-safe.
Adds unit tests for codecMaxChannels and four decider scenarios covering the
literal issue repro (6-ch FLAC→MP3 clamps to 2), a stricter profile limit
winning over the codec clamp, a looser profile limit leaving the codec clamp
intact, and a codec with no hard limit (AAC) passing 6 channels through.
* test(e2e): pin codec channel clamp at the Subsonic API surface (#5336)
Add a 6-channel FLAC fixture to the e2e test suite and use it to assert the
codec channel clamp end-to-end on both Subsonic streaming endpoints:
- getTranscodeDecision (mp3OnlyClient, no MaxAudioChannels in profile):
expects TranscodeStream.AudioChannels == 2 for the 6-channel source. This
exercises the new codecMaxChannels() helper through the OpenSubsonic
decision endpoint, with no profile-level channel limit masking the bug.
- /rest/stream (legacy): requests format=mp3 against the multichannel
fixture and asserts streamerSpy.LastRequest.Channels == 2, confirming
the clamp propagates through ResolveRequest into the stream.Request that
the streamer receives.
The fixture is metadata-only (channels: 6 plumbed via the existing
storagetest.File helper) — no real audio bytes required, since the e2e
suite uses a spy streamer rather than invoking ffmpeg. Bumps the empty-query
search3 song count expectation from 13 to 14 to account for the new fixture.
* test(decider): clarify codec-clamp comment terminology
Distinguish "transcoding profile MaxAudioChannels" (Profile.MaxAudioChannels
field) from "LimitationAudioChannels" (CodecProfile rule constant). The
regression test bypasses the former, not the latter.
* test(artwork): expect shared disc art for unnumbered filenames in single-folder albums
* fix(artwork): match unnumbered disc art for every disc in single-folder albums
* test(artwork): verify shared disc art resolves for every disc number
* test(artwork): regression guard for numbered disc filter with mixed filenames
* test(artwork): verify DiscArtPriority order decides numbered vs shared disc art
* test(artwork): strengthen regression guard to exercise both disc art branches
* refactor(artwork): simplify disc art matching and drop redundant comments
- Lowercase the pattern and filename once in fromExternalFile and pass
lowered values into extractDiscNumber, eliminating the duplicate
strings.ToLower calls inside that helper.
- Drop narrating comments in reader_disc.go and reader_disc_test.go that
duplicated information already conveyed by nearby code or doc comments.
* fix(artwork): prefer numbered disc art over shared fallback within a pattern
Review feedback: with files [disc.jpg, disc1.jpg, disc2.jpg] in a single
folder, the previous single-folder fall-through returned the first match
in imgFiles order. Because compareImageFiles sorts 'disc' before 'disc1'
and 'disc2', disc.jpg would mask the per-disc numbered files for every
disc, regressing the behavior from before the shared-disc-art change.
Within a single pattern the loop now records the first viable unnumbered
candidate as a fallback and keeps scanning for a numbered match equal to
the target disc. Numbered matches still win immediately; the shared file
is only returned when no numbered match for the target disc exists.
Also drops the redundant strings.ToLower(pattern) at the top of
fromExternalFile; fromDiscArtPriority already lowercases the whole
priority string before splitting, so the function contract is now
'pattern must be lowercase' (documented on the function).
* refactor(artwork): trim disc art matching comments and table-drive tests
Doc comment on fromExternalFile is trimmed to the one non-obvious
contract (caller must pre-lowercase the pattern) plus the headline
behavior; the bulleted restatement of the branch logic went away.
Two inline comments that narrated what the code already shows are
also gone.
Hoisting a `hasWildcard := strings.ContainsRune(pattern, '*')` check
out of the loop avoids per-iteration extractDiscNumber calls for
literal patterns (e.g. `shellac.png`) and lets the loop break as
soon as a viable fallback is found, since literal patterns can never
be beaten by a numbered match. Wildcard patterns keep the original
scan-to-end-for-numbered-match behavior.
The two regression tests added in the previous commit were
structurally identical apart from discNumber/expected, so they are
collapsed into a DescribeTable with two entries — matching the
existing table style used for extractDiscNumber tests in the same
file.
* fix(artwork): support '?' and '[...]' wildcards in disc art patterns
filepath.Match understands three glob metacharacters ('*', '?', '[')
but extractDiscNumber only looked for '*'. A pattern like 'disc?.jpg'
or 'cd[12].jpg' would therefore be treated as unnumbered, and every
disc of a multi-disc album would resolve to the same (first-sorted)
file instead of the per-disc numbered art.
extractDiscNumber now finds the literal prefix of the pattern by
scanning for the first '*', '?', or '[' (via strings.IndexAny),
strips it from the filename, and parses the leading digits that
follow. The standalone filepath.Match check is dropped; HasPrefix
plus the leading-digits requirement is enough to reject non-matches,
and the caller already verifies the glob match before calling.
fromExternalFile's literal-pattern optimization is widened
correspondingly: a pattern is treated as literal only when it
contains none of '*', '?', '['. Any wildcard form now keeps the
scan-to-end behavior so a numbered match can beat a fallback.
Adds table entries for both the extractDiscNumber parser and the
fromExternalFile higher-level behavior, covering '?' and '[...]'
patterns as well as a literal-pattern baseline.
* refactor(artwork): tidy extractDiscNumber after glob-wildcard support
- Name the '*?[' charset as globMetaChars, used by both extractDiscNumber
and fromExternalFile so the two call sites can't drift.
- Trim the extractDiscNumber doc comment: keep the non-obvious caller
contract, drop the algorithm narration.
- Replace the byte-slice digit accumulator with a direct filename slice
fed to strconv.Atoi.
- Rename the four new non-'*' wildcard Entry descriptions so they read
like the existing extractDiscNumber table ('pattern, target → expected')
instead of the ambiguous 'disc 1' shorthand.
* fix(artwork): retry remaining fallbacks when the first one fails to open
Review feedback: the previous shape remembered only the first unnumbered
candidate and fell through to a generic error if os.Open failed on it,
even though other matching unnumbered files in imgFiles could have
succeeded. The pre-PR code was more resilient because it looped and
continued on open failure.
fromExternalFile now collects every viable unnumbered candidate into a
slice during the scan, then tries them in order after the loop, mirroring
the pre-PR retry-on-open-failure behavior. Numbered matches still return
immediately on first success and skip the candidate list entirely — an
open failure on a numbered match means no other file has that number
anyway.
Also:
- globMetaChars doc comment now notes that '\' escape is intentionally
excluded (filepath.Match supports it but treating it as a metachar here
would misalign extractDiscNumber's literal-prefix extraction with no
benefit for realistic config patterns).
- The 'cover.jpg doesn't match disc*.*' Entry in the extractDiscNumber
table is renamed to 'cover.jpg with disc*.* (no prefix match)' to
reflect that the test now exercises the HasPrefix defensive guard,
not the removed internal filepath.Match check.
Regression test added: a single-folder album with a deleted first
candidate file resolves to the second candidate.
* fix(artwork): scan all literal-pattern matches so fallback retry works
Review feedback: the 'break on first literal match' optimization
assumed only one file in imgFiles could match a literal basename,
but filepath.Match compares basenames only — multiple folders can
contribute files with the same basename, and the fallback-list retry
in 5d79f751c is defeated if the loop breaks after recording just
the first one.
Removing the break makes literal and wildcard patterns follow the
same scan-to-end path, preserving the retry-on-open-failure
resilience regained in 5d79f751c. The efficiency cost is negligible
— imgFiles is 5-20 entries per album and this is a cache-miss path.
The error-check ordering after backupOp.Step(-1) checked !done before
err, which masked the underlying SQLite error (e.g. SQLITE_BUSY, I/O
errors) with a generic "backup not done with step -1" message. On
failure, Step returns done=false together with a non-nil err, so the
!done branch short-circuited before the real error was ever reported.
Swap the checks so the SQLite error is returned first, making failing
backups actually diagnosable.
Refs https://github.com/navidrome/navidrome/issues/5305#issuecomment-4230470593
* perf(subsonic): keep album/mediafile params on stack in response helpers
Two helpers were forcing their entire value parameter onto the heap via
pointer-to-field aliasing, adding one full-struct heap allocation per
response item on hot Subsonic endpoints (search3, getAlbumList2, etc.).
- childFromMediaFile assigned &mf.BirthTime to the returned Child,
pulling the whole ~1KB model.MediaFile to the heap on every call.
- buildDiscSubtitles passed &a.UpdatedAt to NewArtworkID inside a loop,
pulling the whole model.Album to the heap on every album with discs.
Both now copy the time.Time to a stack-local and use gg.P / &local so
only the small time.Time escapes. Verified via go build -gcflags=-m=2:
moved to heap: mf and moved to heap: a are gone at these sites.
* perf(metadata): avoid per-track closure allocations in PID computation
createGetPID was a factory that returned nested closures capturing
mf model.MediaFile (~992 bytes) by reference. Since it is called three
times per track during scans (trackPID, albumID, artistID), every track
triggered the allocation of three closures plus a heap copy of the full
MediaFile.
Refactor the body into package-level functions (computePID, getPIDAttr)
that take hash as an explicit parameter and the inner slice.Map callback
to an indexed for loop, removing the closure-capture of mf entirely.
trackPID/albumID/artistID now call computePID directly.
The tiny createGetPID wrapper was kept only for tests; move the
closure-building into the test file so production has no dead API.
Verified via go build -gcflags=-m=2 on model/metadata: no
"moved to heap: mf" anywhere in persistent_ids.go, and the callers in
map_mediafile.go / map_participants.go no longer heap-promote their
MediaFile argument.
* fix(subsonic): always emit required `created` field on AlbumID3
Strict OpenSubsonic clients (e.g. Navic via dev.zt64.subsonic) reject
search3/getAlbum/getAlbumList2 responses that omit the `created` field,
which the spec marks as required. Navidrome was dropping it whenever
the album's CreatedAt was zero.
Root cause was threefold:
1. buildAlbumID3/childFromAlbum conditionally emitted `created`, so a
zero CreatedAt became a missing JSON key.
2. ToAlbum's `older()` helper treated a zero BirthTime as the minimum,
so a single track with missing filesystem birth time could poison
the album aggregation.
3. phase_1_folders' CopyAttributes copied `created_at` from the previous
album row unconditionally, propagating an already-zero value forward
on every metadata-driven album ID change. Since sql_base_repository
drops `created_at` on UPDATE, a poisoned row could never self-heal.
Fixes:
- Always emit `created`, falling back to UpdatedAt/ImportedAt when
CreatedAt is zero. Adds albumCreatedAt() helper used by both
buildAlbumID3 and childFromAlbum.
- Guard `older()` against a zero second argument.
- Skip the CopyAttributes call in phase_1_folders when the previous
album's created_at is zero, so the freshly-computed value survives.
- New migration backfills existing broken rows from media_file.birth_time
(falling back to updated_at).
Tested against a real DB: repaired 605/6922 affected rows, no side
effects on healthy rows.
Signed-off-by: Deluan <deluan@navidrome.org>
* refactor(subsonic): return albumCreatedAt by value to avoid heap escape
Returning *time.Time from albumCreatedAt caused Go escape analysis to
move the entire model.Album parameter to the heap, since the returned
pointer aliased a field of the value receiver. For hot endpoints like
getAlbumList2 and search3, this meant one full-struct heap allocation
per album result.
Return time.Time by value and let callers wrap it with gg.P() to take
the address locally. Only the small time.Time value escapes; the
model.Album struct stays on the stack. Also corrects the doc comment
to reflect the actual guarantee ("best-effort" rather than "non-zero"),
matching the test case that exercises the all-zero fallback.
---------
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(msi): include ffprobe executable in MSI build
Signed-off-by: Deluan <deluan@navidrome.org>
* feat(ffmpeg): add IsProbeAvailable() to FFmpeg interface
Add runtime check for ffprobe binary availability with cached result
and startup logging. When ffprobe is missing, logs a warning at startup.
* feat(stream): guard MakeDecision behind ffprobe availability
When ffprobe is not available, MakeDecision returns a decision with
ErrorReason set and both CanDirectPlay and CanTranscode false, instead
of failing with an opaque exec error.
* feat(subsonic): only advertise transcoding extension when ffprobe is available
The OpenSubsonic transcoding extension is now conditionally included
based on ffprobe availability, so clients know not to call
getTranscodeDecision when ffprobe is missing.
* refactor(ffmpeg): move ffprobe startup warning to initial_setup
Move the ffprobe availability warning from the lazy IsProbeAvailable()
check to checkFFmpegInstallation() in server/initial_setup.go, alongside
the existing ffmpeg warning. This ensures the warning appears at startup
rather than on first endpoint call.
* fix(e2e): set noopFFmpeg.IsProbeAvailable to true
The e2e tests use pre-populated probe data and don't need a real ffprobe
binary. Setting IsProbeAvailable to true allows the transcode decision
logic to proceed normally in e2e tests.
* fix(stream): only guard on ffprobe when probing is needed
Move the IsProbeAvailable() guard inside the SkipProbe check so that
legacy stream requests (which pass SkipProbe: true) are not blocked
when ffprobe is missing. The guard only applies when probing is
actually required (i.e., getTranscodeDecision endpoint).
* refactor(stream): fall back to tag metadata when ffprobe is unavailable
Instead of blocking getTranscodeDecision when ffprobe is missing,
fall back to tag-based metadata (same behavior as /rest/stream).
The transcoding extension is always advertised. A startup warning
still alerts admins when ffprobe is not found.
* fix(stream): downgrade ffprobe-unavailable log to Debug
Avoids log spam when clients call getTranscodeDecision repeatedly
without ffprobe installed. The startup warning in initial_setup.go
already alerts admins at Warn level.
---------
Signed-off-by: Deluan <deluan@navidrome.org>
The cleanupLoop goroutine could execute cleanupExpired against a closed
database because Close() did not wait for the goroutine to exit before
calling db.Close(). This caused 'sql: database is closed' errors during
plugin unload or shutdown.
Close() now cancels the cleanup goroutine's context and waits for it to
finish via a sync.WaitGroup before running the final cleanup and closing
the database.
Signed-off-by: Deluan <deluan@navidrome.org>
The Squiddies Glass theme applies a CSS color filter to all images inside
table cells (MuiTableCell '& img'), which was intended for small playback
indicator icons. This inadvertently also applied to disc cover art
thumbnails in multi-disc album views, turning them into solid color
blocks. Adding 'filter: none !important' to the discCoverArt style
ensures cover art images are always displayed correctly regardless of
the active theme.
Signed-off-by: Deluan <deluan@navidrome.org>
* fix: allow WAV direct play by aliasing pcm and wav codecs
WAV files were being transcoded to FLAC even when the browser declared
native WAV support. The backend normalizes ffprobe's pcm_s16le (and
similar PCM variants) to the internal codec name "pcm", while browsers
advertise WAV support as audioCodecs:["wav"] in their client profile.
The direct-play codec check compared these literally and rejected the
match with "audio codec not supported", forcing a needless FLAC
transcode.
Added {"pcm", "wav"} to codecAliasGroups so the matcher treats them
as equivalent. The container check runs first, so AIFF files (which also
normalize to codec "pcm" but use container "aiff") cannot
accidentally match a WAV direct-play profile.
* feat: include profile details in direct-play rejection reasons
The transcodeReason array returned by getTranscodeDecision previously
contained one generic string per failed DirectPlayProfile (e.g., five
copies of "container not supported"), making it hard to correlate a
reason with the profile that rejected the stream.
Each rejection reason now embeds the offending source value (in single
quotes) along with a compact representation of the full profile that
rejected it, rendered as [container/codec]. For example, clients with
two distinct ogg-container profiles (opus and vorbis) produced two
identical rejection strings; they now read "container 'wav' not
supported by profile [ogg/opus]" and "container 'wav' not supported
by profile [ogg/vorbis]", making each entry in the transcodeReason
array unique and self-describing.
A small describeProfile helper renders profiles as [container/codec]
(or [container] when no codec is constrained).
* refactor(stream): address code review — narrow pcm/wav match, tighten tests
Responds to reviewer feedback on the initial PR:
- Replace the symmetric pcm↔wav codec alias with a contextual
isPCMInWAVMatch check in checkDirectPlayProfile. The alias
unconditionally equated the two names in matchesCodec, which would
let AIFF sources (also normalized to codec "pcm") falsely satisfy
a codec-only ["wav"] direct-play profile that omitted containers.
The new check additionally requires src.Container == "wav" before
bridging the names, closing the false-positive path.
- Tighten the rejection-reason test assertions to verify the new
formatted output (source value + profile descriptor) instead of
just matching loose substrings like "container", preventing
unrelated rejections from satisfying the expectations.
- Add coverage for the WAV→wav-codec acceptance path and for the
AIFF-in-wav-codec-profile rejection path to pin down the contract
of isPCMInWAVMatch.
* refactor(codec): rename isPCMInWAVMatch to matchesPCMWAVBridge for clarity
Signed-off-by: Deluan <deluan@navidrome.org>
---------
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(db): resolve schema inconsistencies in library_artist and scrobble_buffer tables
* fix(db): address PR comments around speed of the migration
* fix(db): simplify schema inconsistencies migration
Remove ineffective PRAGMA foreign_keys and cache_size statements, which are
no-ops inside goose's wrapping transaction. Drop the down migration body
(Navidrome does not run down migrations) and document the intent. Rename
the file to refresh the timestamp after rebase.
---------
Co-authored-by: Deluan Quintão <deluan@navidrome.org>
PublicURL() copied only the scheme and host from conf.Server.ShareURL,
silently dropping any path component. This broke OpenGraph image URLs
(and other share links) when ShareURL was configured with a path prefix
like https://example.com/navi — generated URLs pointed to /share/img/...
at the root instead of /navi/share/img/...
Now the ShareURL path is prepended to the resource path, with trailing
slashes trimmed. When ShareURL has no path, behavior is unchanged.
* fix(ui): regenerate package-lock.json to have integrity fields
* chore(deps): update esbuild and related packages to version 0.27.7
Signed-off-by: Deluan <deluan@navidrome.org>
* chore(lint): exclude node_modules from golangci-lint
Prevents lint errors from Go files inside npm packages under
ui/node_modules from being picked up by golangci-lint.
---------
Signed-off-by: Deluan <deluan@navidrome.org>
Co-authored-by: Deluan Quintão <deluan@navidrome.org>
* refactor(artwork): rename DevJpegCoverArt to EnableWebPEncoding
Replaced the internal DevJpegCoverArt flag with a user-facing
EnableWebPEncoding config option (defaults to true). When disabled, the
fallback encoding now preserves the original image format — PNG sources
stay PNG for non-square resizes, matching v0.60.3 behavior. The previous
implementation incorrectly re-encoded PNG sources as JPEG in non-square
mode. Also added EnableWebPEncoding to the insights data.
* feat: add configurable UICoverArtSize option
Converted the hardcoded UICoverArtSize constant (600px) into a
configurable option, allowing users to reduce the cover art size
requested by the UI to mitigate slow image encoding. The value is
served to the frontend via the app config and used by all components
that request cover art. Also simplified the cache warmer by removing
a single-iteration loop in favor of direct code.
* style: fix prettier formatting in subsonic test
* feat: log WebP encoder/decoder selection
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(artwork): address PR review feedback
- Add DevJpegCoverArt to logRemovedOptions so users with the old config
key get a clear warning instead of a silent ignore.
- Include EnableWebPEncoding in the resized artwork cache key to prevent
stale WebP responses after toggling the setting.
- Skip animated GIF to WebP conversion via ffmpeg when EnableWebPEncoding
is false, so the setting is consistent across all image types.
- Fix data race in cache warmer by reading UICoverArtSize at construction
time instead of per-image, avoiding concurrent access with config
cleanup in tests.
- Clarify cache warmer docstring to accurately describe caching behavior.
* Revert "fix(artwork): address PR review feedback"
This reverts commit 3a213ef03e.
* fix(artwork): avoid data race in cache warmer config access
Capture UICoverArtSize at construction time instead of reading from
conf.Server on each doCacheImage call. The background goroutine could
race with test config cleanup, causing intermittent race detector
failures in CI.
* fix(configuration): clamp UICoverArtSize to be within 200 and 1200
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(artwork): preserve album cache key compatibility with v0.60.3
Restored the v0.60.3 hash input order for album artwork cache keys
(Agents + CoverArtPriority) so that existing caches remain valid on
upgrade when EnableExternalServices is true. Also ensures
CoverArtPriority is always part of the hash even when external services
are disabled, fixing a v0.60.3 bug where changing CoverArtPriority had
no effect on cache invalidation.
Signed-off-by: Deluan <deluan@navidrome.org>
* fix: default EnableWebPEncoding to false and reduce artwork parallelism
Changed EnableWebPEncoding default to false so that upgrading users get
the same JPEG/PNG encoding behavior as v0.60.3 out of the box, avoiding
the WebP WASM overhead until native libwebp is available. Users can
opt in to WebP by setting EnableWebPEncoding=true. Also reduced the
default DevArtworkMaxRequests to half the CPU count (min 2) to lower
resource pressure during artwork processing.
* fix(configuration): update DefaultUICoverArtSize to 300
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(Makefile): append EXTRA_BUILD_TAGS to GO_BUILD_TAGS
Signed-off-by: Deluan <deluan@navidrome.org>
---------
Signed-off-by: Deluan <deluan@navidrome.org>
buildOSPlaylist was the only OpenSubsonic builder function missing the
LegacyClients guard, causing attributes like `validUntil` and `readonly`
to appear in playlist XML responses for legacy clients like DSub2000.
This caused a crash when DSub2000 tried to parse evaluated smart
playlists containing the `validUntil` attribute.
The coverArt field was returning the raw uploaded image filename instead
of the standard ra-{id} artwork ID format. This caused getCoverArt to
fail when clients passed the coverArt value directly. Now uses
CoverArtID().String() consistent with how albums, artists, and playlists
return their coverArt values. Fixes#5293.
Fix#5284
Several configOptions struct fields were missing corresponding
viper.SetDefault entries, making them invisible to environment variable
overrides and config file parsing. Added defaults for mpvpath (consistent
with ffmpegpath), artistimagefolder, and plugins.loglevel.
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(external): refresh stale artist image URLs on expiry
ArtistImage() was serving cached image URLs from the database
indefinitely, ignoring ExternalInfoUpdatedAt. When users changed agent
configuration (e.g. disabling Deezer), old URLs persisted because only
the UpdateArtistInfo code path checked the TTL.
Now ArtistImage() checks the expiry and enqueues a background refresh
when the cached info is stale, matching the pattern used by
refreshArtistInfo(). The stale URL is still returned immediately to
avoid blocking clients.
Fixes#5266
* test: add expired artist image info test with log assertion
Verify that ArtistImage() enqueues a background refresh when cached
info is expired, by capturing log output and checking for the expected
debug message. Also asserts the stale URL is returned immediately
without calling the agent.
Signed-off-by: Deluan <deluan@navidrome.org>
* fix: only enqueue refresh when returning a stale cached URL
Move the expiry check to the else branch so we only enqueue a
background refresh when a cached image URL exists and is being
returned. This avoids doubling external API calls when the URL is
empty (synchronous fetch) but ExternalInfoUpdatedAt is old.
---------
Signed-off-by: Deluan <deluan@navidrome.org>
ffmpeg.ExtractImage returns a pipe-based reader immediately, before ffmpeg
finishes processing. When the audio file has no embedded image stream (e.g.
a plain MP3), ffmpeg exits with an error that closes the pipe asynchronously.
The selectImageReader function saw the non-nil reader as a success and
returned it instead of falling through to the next source in the chain
(album art). This caused getCoverArt to return an error response for tracks
on albums where the disc artwork reader was invoked but no embedded art
existed.
Fixed by reading one byte from the pipe to validate the stream delivers
data before returning it. If the read fails, the reader is closed and nil
is returned, allowing the fallback chain to continue to album artwork.
Closes#5265
Replace 14 repeated fmt.Fprintln(os.Stderr, "FATAL:", ...)/os.Exit(1)
patterns with a single logFatal function. This reduces duplication
and makes all fatal config paths testable via SetLogFatal.
Signed-off-by: Deluan <deluan@navidrome.org>
* feat: add toPascalCase helper for config key display
Adds a toPascalCase helper that converts dotted lowercase Viper config keys
(e.g. 'scanner.schedule') to PascalCase (e.g. 'Scanner.Schedule') for use
in user-facing warning messages. Includes export_test.go binding and a
full Ginkgo DescribeTable test suite covering simple, dotted, multi-segment,
already-capitalized, and empty-string cases.
* feat: remap ND_-prefixed env var names found in config files
Detect when users mistakenly use environment variable names (like
ND_ADDRESS) in config files, remap them to canonical keys, and warn.
Fatal error if both ND_ and canonical versions of the same key exist.
Closes#5242
Replaced single Read assertion with Eventually loop to drain buffered
pipe data after context cancellation. The previous test assumed the first
Read after cancel() would fail, but ffmpeg may have already written data
into the pipe buffer before being killed, causing the Read to succeed
from buffered content.
The config flag gates all image uploads (artists, radios, playlists),
not just cover art. Rename it to accurately reflect its scope across
the backend config, native API permission check, Subsonic CoverArtRole,
serve_index JSON key, and frontend config.
FTS5's implicit AND (space-separated tokens) silently fails when combined
with parenthesized OR groups produced by processPunctuatedWords. For example,
searching "you've got" generated the query `("you ve" OR youve*) got*` which
returned no results. Using explicit AND (`("you ve" OR youve*) AND got*`)
resolves this FTS5 quirk. Since implicit and explicit AND are semantically
identical in FTS5, this change is safe for all queries unconditionally.
* feat(ui): cancel in-flight image requests on pagination and cache across remounts
When paginating quickly through list/grid views, image requests for previous
pages were never canceled, queuing on the server and blocking new images.
This adds a useImageUrl hook that loads images via fetch() with AbortController,
so requests are canceled when components unmount. A module-level cache (URL →
blob URL) with reference counting ensures React Admin refreshes display images
instantly without re-fetching.
* feat(ui): update AlbumListPagination to conditionally render based on albumListType
Signed-off-by: Deluan <deluan@navidrome.org>
* feat(ui): abort all in-flight image fetches on pagination change
Pagination component now watches page/perPage via useListContext and
calls abortAllInFlight() when either changes, freeing the browser
connection pool immediately for the next page's data request.
Also adds empty placeholder style to CoverArtAvatar so it renders as a
clean transparent area while loading instead of the default person icon.
* Revert "feat(ui): abort all in-flight image fetches on pagination change"
This reverts commit 3bc09f9d03.
* fix(ui): limit concurrent image fetches to prevent connection pool saturation
With <img src>, the browser prioritizes API requests over image loads.
With fetch(), all requests compete equally for the HTTP/1.1 connection
pool (6 per origin), causing API requests to queue behind images and
making pagination feel unresponsive. Caps concurrent image fetches at
4 with a pending queue, leaving connections free for API requests.
Queued fetches for unmounted components are removed without ever
hitting the network.
* fix(ui): fix queued fetch not aborted on unmount
Set queued=false when doFetch executes from the pending queue, so
cleanup correctly calls controller.abort() instead of searching an
already-drained queue.
---------
Signed-off-by: Deluan <deluan@navidrome.org>
The Vorbis/FLAC VERSION field is for track-level disambiguation (e.g.
remix, live, 30s edit), not album versioning. Including it in the
albumversion aliases caused albums to split incorrectly when tracks
had different VERSION values and no MusicBrainz Album ID was set.
Remove 'version' from the albumversion aliases in mappings.yaml.
Users who want the old behavior can re-add it via Tags config.
Update the PID test to use 'albumversion' directly instead of
'version' as the raw PID attribute, with a realistic value.
Fixes#5082
Co-authored-by: Deluan Quintão <deluan@navidrome.org>
Increased the UI cover art request size from 300px to 600px for sharper
images on high-DPI displays. Replaced BiLinear with CatmullRom (bicubic)
interpolation for higher quality image resizing. Extracted the hardcoded
size into a COVER_ART_SIZE constant in the frontend and consolidated
backend sizes into a CacheWarmerImageSizes slice. Removed the unused
UIThumbnailSize constant.
Signed-off-by: Deluan <deluan@navidrome.org>
Removed marginBottom: '3px' from tileBar and tileBarMobile styles that
was causing the hover overlay to not fully cover the album cover art.
The margin pushed the absolutely-positioned GridListTileBar up, leaving
a visible gap at the bottom. This became apparent after d2a54243a added
aspectRatio: 1 to the cover container.
Allow plugins to opt out of automatic redirect following on a per-request
basis. When set to true, the response returns the redirect status code and
Location header directly instead of following to the final destination.
* feat(scheduler): add CrontabSchedule with crontab(5) random ~ syntax
Implement ParseCrontab() that extends robfig/cron with support for
the crontab(5) random ~ operator (e.g., 0~30 * * * *). Random values
are resolved fresh on each Next() call for load spreading.
Supports A~B, ~B, A~, and bare ~ forms in all 6 fields (including
seconds). Expressions without ~ delegate to robfig's standard parser
with zero overhead.
Integrates into scheduler.Add() and conf.validateSchedule() so that
scanner.schedule and backup.schedule config values accept ~ syntax.
* refactor(scheduler): resolve random ~ values once at parse time
Change from per-Next() randomization to per-parse randomization,
matching crontab(5) semantics. This prevents double-firing within
the same period when random values land after the current time.
ParseCrontab now resolves ~ fields to concrete values, substitutes
them into the spec string, and delegates to robfig's parser. This
eliminates CrontabSchedule, randomField, and resolveField entirely.
* test(scheduler): replace WaitGroup with channel for job execution synchronization
Signed-off-by: Deluan <deluan@navidrome.org>
---------
Signed-off-by: Deluan <deluan@navidrome.org>
The test was checking that the buffer was drained before asserting on
cached sizes, but the buffer is cleared before processBatch completes.
Use Eventually on getCachedSizes() directly to properly wait for the
artwork caching to finish.
* feat(artwork): add KindRadioArtwork and EntityRadio constant
* feat(model): add UploadedImage field and artwork methods to Radio
* feat(model): add Radio to GetEntityByID lookup chain
* feat(db): add uploaded_image column to radio table
* feat(artwork): add radio artwork reader with uploaded image fallback
* feat(api): add radio image upload/delete endpoints
* feat(ui): add radio artwork ID prefix to getCoverArtUrl
* feat(ui): add cover art display and upload to RadioEdit
* feat(ui): add cover art thumbnails to radio list
* feat(ui): prefer artwork URL in radio player helper
* refactor: remove redundant code in radio artwork
- Remove duplicate Avatar rendering in RadioList by reusing CoverArtField
- Remove redundant UpdatedAt assignment in radio image handlers (already set by repository Put)
* refactor(ui): extract shared useImageLoadingState hook
Move image loading/error/lightbox state management into a shared
useImageLoadingState hook in common/. Consolidates duplicated logic
from AlbumDetails, PlaylistDetails, RadioEdit, and artist detail views.
* feat(ui): use radio placeholder icon when no uploaded image
Remove album placeholder fallback from radio artwork reader so radios
without an uploaded image return ErrUnavailable. On the frontend, show
the internet-radio-icon.svg placeholder instead of requesting server
artwork when no image is uploaded, allowing favicon fallback in the
player.
* refactor(ui): update defaultOff fields in useSelectedFields for RadioList
Signed-off-by: Deluan <deluan@navidrome.org>
* fix: address code review feedback
- Add missing alt attribute to CardMedia in RadioEdit for accessibility
- Fix UpdateInternetRadio to preserve UploadedImage field by fetching
existing radio before updating (prevents Subsonic API from clearing
custom artwork)
- Add Reader() level tests to verify ErrUnavailable is returned when
radio has no uploaded image
* refactor: add colsToUpdate to RadioRepository.Put
Use the base sqlRepository.put with column filtering instead of
hand-rolled SQL. UpdateInternetRadio now specifies only the Subsonic API
fields, preventing UploadedImage from being cleared. Image upload/delete
handlers specify only UploadedImage.
* fix: ensure UpdatedAt is included in colsToUpdate for radio Put
---------
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(server): capture ffmpeg stderr and warn on empty transcoded output
When ffmpeg fails during transcoding (e.g., missing codec like libopus),
the error was silently discarded because stderr was sent to io.Discard
and the HTTP response returned 200 OK with a 0-byte body.
- Capture ffmpeg stderr in a bounded buffer (4KB) and include it in the
error message when the process exits with a non-zero status code
- Log a warning when transcoded output is 0 bytes, guiding users to
check codec support and enable Trace logging for details
- Remove log level guard so transcoding errors are always logged, not
just at Debug level
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(server): return proper error responses for empty transcoded output
Instead of returning HTTP 200 with 0-byte body when transcoding fails,
return a Subsonic error response (for stream/download/getTranscodeStream)
or HTTP 500 (for public shared streams). This gives clients a clear
signal that the request failed rather than a misleading empty success.
Signed-off-by: Deluan <deluan@navidrome.org>
* test(e2e): add tests for empty transcoded stream error responses
Add E2E tests verifying that stream and download endpoints return
Subsonic error responses when transcoding produces empty output.
Extend spyStreamer with SimulateEmptyStream and SimulateError fields
to support failure injection in tests.
Signed-off-by: Deluan <deluan@navidrome.org>
* refactor(server): extract stream serving logic into Stream.Serve method
Extract the duplicated non-seekable stream serving logic (header setup,
estimateContentLength, HEAD draining, io.Copy with error/empty detection)
from server/subsonic/stream.go and server/public/handle_streams.go into a
single Stream.Serve method on core/stream. Both callers now delegate to it,
eliminating ~30 lines of near-identical code.
* fix(server): return 200 with empty body for stream/download on empty transcoded output
Don't return a Subsonic error response when transcoding produces empty
output on stream/download endpoints — just log the error and return 200
with an empty body. The getTranscodeStream and public share endpoints
still return HTTP 500 for empty output. Stream.Serve now returns
(int64, error) so callers can check the byte count.
---------
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(scanner): widen WASM panic recovery to cover tag/property reading
The panic recovery in gotaglib's extractMetadata was only inside
openFile(), which covers taglib.OpenStream(). Panics from f.AllTags()
and f.Properties() (e.g. readString crashes on malformed files) were
uncaught, crashing the scanner subprocess with exit status 2.
Move the recover() up to extractMetadata() so it covers the entire
tag reading lifecycle, matching the CGO taglib wrapper's approach.
Fixes#5220
* fix(scanner): use consistent log key "filePath" in panic recovery
* fix(scanner): include stack trace in WASM panic recovery log
Signed-off-by: Deluan <deluan@navidrome.org>
---------
Signed-off-by: Deluan <deluan@navidrome.org>
Added a custom AlbumListPagination component that returns null while the
list is loading, preventing stale pagination controls from appearing
alongside the Loading spinner when navigating to the Random album view.
Added aspect-ratio: 1 to the cover container so it reserves the correct
square dimensions immediately on first render, before react-measure
reports the container width. Previously, contentRect.bounds.width started
as undefined/0, causing images to render with zero height and producing a
brief flash of compressed tiles before the measurement callback fired.
When artists are purged during garbage collection, any custom uploaded
cover images were left orphaned on disk. Modified purgeEmpty() to query
for uploaded_image filenames before the bulk DELETE, then remove the
corresponding files from disk afterwards. Image cleanup is best-effort
to avoid failing the GC if a file is already missing or inaccessible.
Also populated album_artists entries in the persistence test suite setup
to reflect the actual album-artist relationships from test data, ensuring
purgeEmpty() doesn't inadvertently delete shared test artists.
The lockfile still referenced the local file path from testing,
causing CI to fail resolving the navidrome-music-player import.
Regenerated to point to the npm registry.
Navidrome returns Last-Modified values like `Fri, 12 Dec 2025 03:32:26
UTC`. This is invalid according to RFC 7231 which requires HTTP dates to
use GMT instead of UTC. Switch to http.TimeFormat instead of
time.RFC1123 to resolve the issue.
* fix(artwork): fallback mediafile cover art to disc artwork before album
Changed the mediafile cover art fallback chain to go through disc artwork
before album artwork (mediafile → disc → album). Previously, mediafiles
without embedded art fell back directly to album cover, bypassing any
disc-specific artwork. Renamed AlbumCoverArtID() to DiscCoverArtID() to
encapsulate the disc-vs-album decision in a single method, used by both
CoverArtID() and the mediafile artwork reader.
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(artwork): fix cache invalidation for mediafile and album cover art
Include imagesUpdatedAt from album folders in the mediafile artwork
reader's cache key, so that when a cover image file changes on disk
(without audio metadata changes) the mediafile cache properly
invalidates. Also include CoverArtPriority unconditionally in the album
artwork reader's cache key hash, so that changing the priority order
with external services disabled correctly invalidates the album cache.
* fix(artwork): skip disc artwork resolution for single-disc albums
Single-disc albums with DiscNumber=1 were unnecessarily routed through
discArtworkReader, which does extra DB queries only to fall through to
album art anyway. Now only multi-disc albums use the disc fallback path.
* refactor(artwork): restore AlbumCoverArtID as a separate method
Extract AlbumCoverArtID back out of DiscCoverArtID so the single-disc
fallback path in reader_mediafile can reference it by name instead of
inlining the artwork ID construction.
---------
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(db): normalize timestamps and fix recently added album sorting
SQLite stores timestamps as TEXT and uses string comparison for ORDER BY.
Timestamps in RFC3339 T-format ('2024-01-01T10:00:00Z') sort incorrectly
against space-format ('2024-01-01 10:00:00+00:00') because 'T' (ASCII 84)
> ' ' (ASCII 32), causing albums with T-format timestamps to appear as
newer than they are in the "Recently Added" list.
This adds a migration to normalize all T-format timestamps across all
tables to the space-format expected by go-sqlite3, wraps the
recently_added sort with datetime() to make it format-agnostic, and
replaces the plain album timestamp indexes with expression indexes to
maintain query performance.
* fix(test): improve recently_added sort test robustness
Use same-date timestamps (2024-01-15T08:00:00Z vs 2024-01-15 20:00:00)
so the T-vs-space character difference at position 10 actually triggers
the sorting bug. Initialize index variables to -1 and assert both test
albums are found before comparing positions.
* chore(db): update migration timestamp to 2026-03-16
* feat: add shared ImageUploadService for entity image management
* feat: add UploadedImage field and methods to Artist model
* feat: add uploaded_image column to artist table
* feat: add ArtistImageFolder config option
* refactor: wire ImageUploadService and delegate playlist file ops to it
Wire ImageUploadService into the DI container and refactor the playlist
service to delegate image file operations (SetImage/RemoveImage) to the
shared ImageUploadService, removing duplicated file I/O logic. A local
ImageUploadService interface is defined in core/playlists to avoid an
import cycle between core and core/playlists.
* feat: artist artwork reader checks uploaded image first
* feat: add image-folder priority source for artist artwork
* feat: cache key invalidation for image-folder and uploaded images
* refactor: extract shared image upload HTTP helpers
* feat: add artist image upload/delete API endpoints
* refactor: playlist handlers use shared image upload helpers
* feat: add shared ImageUploadOverlay component
* feat: add i18n keys for artist image upload
* feat: add image upload overlay to artist detail pages
* refactor: playlist details uses shared ImageUploadOverlay component
* fix: add gosec nolint directive for ParseMultipartForm
* refactor: deduplicate image upload code and optimize dir scanning
- Remove dead ImageFilename methods from Artist and Playlist models
(production code uses core.imageFilename exclusively)
- Extract shared uploadedImagePath helper in model/image.go
- Extract findImageInArtistFolder to deduplicate dir-scanning logic
between fromArtistImageFolder and getArtistImageFolderModTime
- Fix fileInputRef in useCallback dependency array
* fix: include artist UpdatedAt in artwork cache key
Without this, uploading or deleting an artist image would not
invalidate the cached artwork because the cache key was only based
on album folder timestamps, not the artist's own UpdatedAt field.
* feat: add Portuguese translations for artist image upload
* refactor: use shared i18n keys for cover art upload messages
Move cover art upload/remove translations from per-entity sections
(artist, playlist) to a shared top-level "message" section, avoiding
duplication across entity types and translation files.
* refactor: move cover art i18n keys to shared message section for all languages
* refactor: simplify image upload code and eliminate redundancies
Extracted duplicate image loading/lightbox state logic from
DesktopArtistDetails and MobileArtistDetails into a shared
useArtistImageState hook. Moved entity type constants to the consts
package and replaced raw string literals throughout model, core, and
nativeapi packages. Exported model.UploadedImagePath and reused it in
core/image_upload.go to consolidate path construction. Cached the
ArtistImageFolder lookup result in artistReader to eliminate a redundant
os.ReadDir call on every artwork request.
Signed-off-by: Deluan <deluan@navidrome.org>
* style: fix prettier formatting in ImageUploadOverlay
* fix: address code review feedback on image upload error handling
- RemoveImage now returns errors instead of swallowing them
- Artist handlers distinguish not-found from other DB errors
- Defer multipart temp file cleanup after parsing
* fix: enforce hard request size limit with MaxBytesReader for image uploads
Signed-off-by: Deluan <deluan@navidrome.org>
---------
Signed-off-by: Deluan <deluan@navidrome.org>
* style(ui): add tooltips for long playlist and album names - 5068
Signed-off-by: Thiago Sfreddo <sfredo@gmail.com>
* fix dnd and improve performance
Signed-off-by: Thiago Sfreddo <sfredo@gmail.com>
* lint fixes
Signed-off-by: Thiago Sfreddo <sfredo@gmail.com>
* fix(ui): update tooltip styles for improved visibility and consistency
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(ui): add overflow tooltip to playlist name for better visibility
Signed-off-by: Deluan <deluan@navidrome.org>
* refactor(ui): simplify OverflowTooltip and improve render performance
- Inline styles from useMenuTooltipStyles into OverflowTooltip (single consumer)
- Use MUI named colors (grey[700]/grey[300] with alpha) instead of raw rgba
- Stabilize ref callback with useCallback to avoid unnecessary ref churn
- Memoize Tooltip classes and hoist TransitionProps to module level
- Fix useLayoutEffect dependency: observe DOM size, not title string
---------
Signed-off-by: Thiago Sfreddo <sfredo@gmail.com>
Signed-off-by: Deluan <deluan@navidrome.org>
Co-authored-by: Deluan Quintão <deluan@navidrome.org>
* fix: add syslog priority prefixes for systemd-journald
When running under systemd, all log messages were assigned priority 3
(error) by journald because navidrome wrote plain text to stderr without
syslog priority prefixes.
Add a journalFormatter that wraps the existing logrus formatter and
prepends <N> syslog priority prefixes (RFC 5424) to each log line.
The formatter is automatically enabled when the JOURNAL_STREAM
environment variable is set (indicating the process is managed by
systemd).
Priority mapping:
- Fatal/Panic → <2>/<0> (crit/emerg)
- Error → <3> (err)
- Warn → <4> (warning)
- Info → <6> (info)
- Debug/Trace → <7> (debug)
Fixes#5142
* test: refactor journalFormatter tests to use Ginkgo and DescribeTable
Signed-off-by: Deluan <deluan@navidrome.org>
---------
Signed-off-by: Deluan <deluan@navidrome.org>
Co-authored-by: Deluan <deluan@navidrome.org>
* fix(ui): allow DefaultTheme "Auto" from config
When DefaultTheme is set to "Auto" in the server config, the
defaultTheme() function in themeReducer now returns AUTO_THEME_ID
instead of falling through to the DarkTheme fallback.
This allows useCurrentTheme to correctly read prefers-color-scheme
and select Light or Dark theme automatically for new/incognito users.
Adds themeReducer unit tests covering Auto, named-theme, and
unrecognized-value fallback paths.
* chore: format
Signed-off-by: Deluan <deluan@navidrome.org>
---------
Signed-off-by: Deluan <deluan@navidrome.org>
Co-authored-by: Deluan <deluan@navidrome.org>
Removed `omitempty` from the `Title` struct tag in the `Child` response
type. The Subsonic/OpenSubsonic API spec requires `title` to be a
mandatory field, but songs with empty titles caused the field to be
omitted entirely, crashing clients like Symfonium during sync.
Ref: https://support.symfonium.app/t/app-gets-stuck-on-syncing-large-database/13004/8
* refactor: remove built-in Spotify integration
Remove the Spotify adapter and all related configuration, replacing
the built-in integration with the plugin system. This deletes the
adapters/spotify package, removes Spotify config options (ID/Secret),
updates the default agents list from "deezer,lastfm,spotify" to
"deezer,lastfm", and cleans up all references across configuration,
metrics, logging, artwork caching, and documentation. Users with
Spotify config options will now see a warning that the options are
no longer available.
* feat: add ListenBrainz to list of default agents
Signed-off-by: Deluan <deluan@navidrome.org>
---------
Signed-off-by: Deluan <deluan@navidrome.org>
* test(share): add failing tests for Delete ownership checks
* fix(share): add ownership check to Delete
* test(share): add failing tests for Update ownership checks
* fix(share): add ownership check to Update
* refactor(share): extract checkOwnership helper with lightweight query
- Deduplicate ownership check from Delete and Update into a single helper
- Use a minimal single-column SELECT instead of Get (avoids loadMedia overhead)
- Use positive bypass form (IsAdmin || invalidUserId) matching codebase convention
* fix(share): convert model.ErrNotFound to rest.ErrNotFound in checkOwnership
Ensure consistent 404 responses when a nonexistent share ID is passed
to Delete or Update, by handling the conversion in checkOwnership
rather than relying on the subsequent write operation.
useMediaQuery defaults to false on the first render (SSR compat),
causing MobileArtistDetails to briefly render on desktop. Its CSS
background-image triggered a full-size image fetch before the
component switched to DesktopArtistDetails, which fetched again.
Pass noSsr: true so the media query evaluates synchronously, and
cap the mobile background image to 800px.
In processMissingTracks, matched tracks were not removed from the candidate
pool after being consumed by moveMatched. This allowed the same target track
to be paired with multiple missing tracks, creating duplicate non-missing
records with the same path. Track consumed matches in a usedMatched map so
each target is used at most once.
Fixes#5169
* feat(artwork): add KindDiscArtwork and ParseDiscArtworkID
Add new disc artwork kind with 'dc' prefix for per-disc cover art
support. The composite ID format is albumID:discNumber, parsed by
the new ParseDiscArtworkID helper.
* feat(conf): add DiscArtPriority configuration option
Default: 'disc*.*, cd*.*, embedded'. Controls how per-disc cover
art is resolved, following the same pattern as CoverArtPriority
and ArtistArtPriority.
* feat(artwork): implement extractDiscNumber helper
Extracts disc number from filenames based on glob patterns by
parsing leading digits from the wildcard-matched portion.
Used for matching disc-specific artwork files like disc1.jpg.
* feat(artwork): implement fromDiscExternalFile source function
Disc-aware variant of fromExternalFile that filters image files
by disc number (extracted from filename) or folder association
(for multi-folder albums).
* feat(artwork): implement discArtworkReader
Resolves disc artwork using DiscArtPriority config patterns.
Supports glob patterns with disc number extraction, embedded
images from first track, and falls back to album cover art.
Handles both multi-folder and single-folder multi-disc albums.
* feat(artwork): register disc artwork reader in dispatcher
Add KindDiscArtwork case to getArtworkReader switch, routing
disc artwork requests to the new discArtworkReader.
* feat(subsonic): add CoverArt field to DiscTitle response
Implements OpenSubsonic PR #220: optional cover art ID in
DiscTitle responses for per-disc artwork support.
* feat(subsonic): populate CoverArt in DiscTitle responses
Each DiscTitle now includes a disc artwork ID (dc-albumID:discNum)
that clients can use with getCoverArt to retrieve per-disc artwork.
* style: fix file permission in test to satisfy gosec
* feat(ui): add disc cover art display and lightbox functionality
Signed-off-by: Deluan <deluan@navidrome.org>
* refactor: simplify disc artwork code
- Add DiscArtworkID constructor to encapsulate the "albumID:discNumber"
format in one place
- Convert fromDiscExternalFile to a method on discArtworkReader,
reducing parameter count from 6 to 2
- Remove unused rootFolder field from discArtworkReader
* style: fix prettier formatting in subsonic index
* style(ui): move cursor style to makeStyles in SongDatagrid
* feat(artwork): add discsubtitle option to DiscArtPriority
Allow matching disc cover art by the disc's subtitle/name.
When the "discsubtitle" keyword is in the priority list, image files
whose stem matches the disc subtitle (case-insensitive) are used.
This is useful for box sets with named discs (e.g., "The Blue Disc.jpg").
* feat(configuration): update discartpriority to include cover art options
Signed-off-by: Deluan <deluan@navidrome.org>
---------
Signed-off-by: Deluan <deluan@navidrome.org>
* feat(artwork): preserve animated image artwork during resize
Detect animated GIFs, WebPs, and APNGs via lightweight byte scanning
and preserve their animation when serving resized artwork. Animated GIFs
are converted to animated WebP via ffmpeg with optional downscaling;
animated WebP/APNG are returned as-is since ffmpeg cannot re-encode them.
Adds ConvertAnimatedImage to the FFmpeg interface for piping stdin data
through ffmpeg with animated WebP output.
* fix(artwork): address code review feedback for animated artwork
Fix ReadCloser leak where ffmpeg pipe's Close was discarded by
io.NopCloser wrapping — now preserves ReadCloser semantics when the
resized reader already supports Close. Use uint64 for PNG chunk position
to prevent potential overflow on 32-bit platforms. Add integration tests
for the animation branching logic in resizeImage.
* test(artwork): add benchmark helpers for generating test images
* test(artwork): add image decode benchmarks for JPEG/PNG at various sizes
* test(artwork): add image resize benchmarks for Lanczos at various sizes
* test(artwork): add image encode benchmarks for JPEG quality levels and PNG
* test(artwork): add full resize pipeline benchmark (decode+resize+encode)
* test(artwork): add tag extraction benchmark for embedded art
* test(cache): add file cache benchmarks for read, write, and concurrent access
* test(artwork): add E2E benchmarks for artwork.Get with cache on/off and concurrency
* fix(test): use absolute path for tag extraction benchmark fixture
* test(artwork): add resize alternatives benchmark comparing resamplers
* perf(artwork): switch to CatmullRom resampler and JPEG for square images
Replace imaging.Lanczos with imaging.CatmullRom for image resizing
(30% faster, indistinguishable quality at thumbnail sizes). Stop forcing
PNG encoding for square images when the source is JPEG — JPEG is smaller
and faster to encode. Square images from JPEG sources went from 52ms to
10ms (80% improvement). Add sync.Pool for encode buffers to reduce GC
pressure under concurrent load.
* perf(artwork): increase cache warmer concurrency from 2 to 4 workers
Resize is CPU-bound, so more workers improve throughput on multi-core
systems. Doubled worker count to better utilize available cores during
background cache warming.
* perf(artwork): switch to xdraw.ApproxBiLinear and always encode as JPEG
Replace disintegration/imaging with golang.org/x/image/draw for image
resizing. This eliminates ~92K allocations per resize (from imaging's
internal goroutine parallelism) down to ~20, reducing GC pressure under
concurrent load.
Always encode resized artwork as JPEG regardless of source format, since
cover art doesn't need transparency. This is ~5x faster than PNG encode
and produces much smaller output (e.g. 18KB JPEG vs 124KB PNG).
* perf(artwork): skip external API call when artist image URL is cached
ArtistImage() was always calling the external agent (Spotify/Last.fm)
to get the image URL, even when the artist already had URLs stored in
the database. This caused every artist image request to block on an
external API call, creating severe serialization when loading artist
grids (5-20 seconds for the first page).
Now use the stored URL directly when available. Artists with no stored
URL still fetch synchronously. Background refresh via UpdateArtistInfo
handles TTL-based URL updates.
* perf(artwork): increase getCoverArt throttle from NumCPU/3 to NumCPU
The previous default of max(2, NumCPU/3) was too aggressive for artist
images which are I/O-bound (downloading from external CDNs), not
CPU-bound. On an 8-core machine this meant only 2 concurrent requests,
causing a staircase pattern where 12 images took ~2.4s wall-clock.
Bumping to max(4, NumCPU) cuts wall-clock time by ~50% for artist image
grids while still preventing unbounded concurrency for CPU-bound resizes.
* perf(artwork): encode resized images as WebP instead of JPEG
Switch from JPEG to WebP encoding for resized artwork using gen2brain/webp
(libwebp via WASM, no CGo). WebP produces ~74% smaller output at the same
quality with only ~25% slower full-pipeline encode time (cached, so only
paid once per artwork+size).
Use NRGBA image type to preserve alpha channel in WebP output, and
transparent padding for square canvas instead of black.
Also removes the disintegration/imaging dependency entirely by replacing
imaging.Fill in playlist tile generation with a custom fillCenter function
using xdraw.ApproxBiLinear.
* perf(artwork): switch from ApproxBiLinear to BiLinear scaling for improved image processing
Signed-off-by: Deluan <deluan@navidrome.org>
* refactor(configuration): rename CoverJpegQuality to CoverArtQuality and update references
Signed-off-by: Deluan <deluan@navidrome.org>
* feat(artwork): add DevJpegCoverArt option to control JPEG encoding for cover art
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(artwork): remove redundant transparent fill and handle encode errors in resizeImage
Removed a no-op draw.Draw call that filled the NRGBA canvas with
transparent pixels — NewNRGBA already zero-initializes to fully
transparent. Also added an early return on encode failure to avoid
allocating and copying potentially corrupt buffer data before returning
the error.
* fix(configuration): reorder default agents (deezer is faster)
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(test): resolve dogsled lint warning in tag extraction benchmark
Use all return values from runtime.Caller instead of discarding three
with blank identifiers, which triggered the dogsled linter.
* fix(artwork): revert cache key format
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(configuration): remove deprecated CoverJpegQuality field and update references to CoverArtQuality
Signed-off-by: Deluan <deluan@navidrome.org>
---------
Signed-off-by: Deluan <deluan@navidrome.org>
When files were moved between libraries, the small channel buffers (size 1)
throughout the watcher pipeline caused backpressure that led to dropped
filesystem events. This meant only some of the affected folders were scanned,
preventing cross-library move detection from working correctly.
Increase all watcher channel buffers to 500 and switch to blocking sends
to ensure no filesystem events are silently dropped.
The ensure_default_transcodings migration only checked target_format
before inserting, but the transcoding table has UNIQUE constraints on
both name and target_format. Older installations may have entries where
the name matches a default (e.g., 'opus audio') but the target_format
differs (e.g., 'oga' instead of 'opus'), causing a UNIQUE constraint
violation on name during the INSERT.
Fixes#5174
* fix: use ADTS format for AAC transcoding to avoid silent output on ffmpeg 8.0+
The fragmented MP4 muxer (`-f ipod -movflags frag_keyframe+empty_moov`)
produces corrupt/silent audio when ffmpeg pipes to stdout, confirmed on
ffmpeg 8.0+. The moof atom offset values are zeroed out in pipe mode,
causing AAC decoder errors. Switch to `-f adts` (raw AAC framing) which
works reliably via pipe and is widely supported by clients including
UPnP/Sonos devices.
* fix: exclude AAC from transcode decision, as it is not working for Sonos.
Signed-off-by: Deluan <deluan@navidrome.org>
---------
Signed-off-by: Deluan <deluan@navidrome.org>
When a client requests transcoding with an explicit format (e.g.,
format=opus) but no maxBitRate, buildLegacyClientInfo was adding a
direct play profile matching the source format. Since there was no
bitrate constraint to block it, MakeDecision would match the source
against the direct play profile and return the raw file instead of
transcoding. This fix only adds the direct play profile when no
explicit format was requested (bitrate-only downsampling) or when the
requested format matches the source format (allowing direct play when
no actual transcoding is needed).
* refactor: rename core/transcode directory to core/stream
* refactor: update all imports from core/transcode to core/stream
* refactor: rename exported symbols to fit core/stream package name
* refactor: simplify MediaStreamer interface to single NewStream method
Remove the two-method interface (NewStream + DoStream) in favor of a
single NewStream(ctx, mf, req) method. Callers are now responsible for
fetching the MediaFile before calling NewStream. This removes the
implicit DB lookup from the streamer, making it a pure streaming
concern.
* refactor: update all callers from DoStream to NewStream
* chore: update wire_gen.go and stale comment for core/stream rename
* refactor: update wire command to handle GO_BUILD_TAGS correctly
Signed-off-by: Deluan <deluan@navidrome.org>
* fix: distinguish not-found from internal errors in public stream handler
* refactor: remove unused ID field from stream.Request
* refactor: simplify ResolveRequestFromToken to receive *model.MediaFile
Move MediaFile fetching responsibility to callers, making the method
focused on token validation and request resolution. Remove ErrMediaNotFound
(no longer produced). Update GetTranscodeStream handler to fetch the
media file before calling ResolveRequestFromToken.
* refactor: extend tokenTTL from 12 to 48 hours
Signed-off-by: Deluan <deluan@navidrome.org>
---------
Signed-off-by: Deluan <deluan@navidrome.org>
* feat(transcode): apply player MaxBitRate cap and use format-aware default bitrates
Add player MaxBitRate cap to the transcode decider so server-side player
bitrate limits are respected when making OpenSubsonic transcode decisions.
The player cap is applied only when it is more restrictive than the client's
maxAudioBitrate (or when the client has no limit).
Also replace the hardcoded 256 kbps default with a format-aware lookup that
checks the DB first (for user-customized values), then built-in defaults,
and finally falls back to 256 kbps. For lossless→lossy transcoding, prefer
maxTranscodingAudioBitrate over maxAudioBitrate when available.
* test(e2e): add tests for player MaxBitRate cap and format-aware default bitrates
Add e2e tests covering:
- Player MaxBitRate forcing transcode when source exceeds cap
- Player MaxBitRate having no effect when source is under cap
- Client limit winning when more restrictive than player MaxBitRate
- Player MaxBitRate winning when more restrictive than client limit
- Player MaxBitRate=0 having no effect
- Format-aware defaults: mp3 (192kbps), opus (128kbps) instead of hardcoded 256
- maxAudioBitrate fallback for lossless→lossy when no maxTranscodingAudioBitrate
- maxTranscodingAudioBitrate taking priority over maxAudioBitrate
- Combined player + client limits flowing correctly through decision→stream
* feat(transcode): update transcoding profiles to add flac, filter by supported codecs, and ensure mp3 fallback
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(db): ensure all default transcodings exist on upgrade
Older installations that were seeded before aac/flac were added to
DefaultTranscodings may be missing these entries. The previous migration
only added flac; this one ensures all default transcodings are present
without touching user-customized entries.
* test: remove duplication
Signed-off-by: Deluan <deluan@navidrome.org>
---------
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(api): return correct scanType in startScan response
The startScan endpoint launches the scan in a goroutine and immediately
calls GetScanStatus to build the response. Because the scanner hasn't
had time to initialize and write its state to the database, the response
contained stale data from the previous scan (e.g., scanType "quick"
when fullScan=true was requested).
Add a polling loop that waits briefly (up to 3s, polling every 50ms) for
the scanner to report Scanning=true before returning the status. If the
timeout expires, it falls back to the current behavior (no regression).
Fixes#5158
* fix(api): use ticker/timer with context cancellation for scan polling
Replace time.Sleep loop with proper ticker, timer, and ctx.Done()
handling so the poll exits cleanly on timeout or client disconnect.
* fix(api): handle fast scan completion in poll loop
Add a channel to detect when the scan goroutine finishes before the
poll loop observes Scanning=true, avoiding a 3s timeout on very fast
scans. Use defer close to handle both success and error paths.
When clicking a song while another was playing, PLAYER_SYNC_QUEUE and
PLAYER_CURRENT would fire before the music player switched tracks,
wiping the playIndex set by PLAYER_PLAY_TRACKS. This caused the player
to stay on the old track instead of switching to the clicked one.
Now reduceSyncQueue and reduceCurrent preserve a pending playIndex until
the music player confirms it actually reached the requested track.
* feat(ui): add browser audio profile detection for transcoding
Detect browser codec capabilities via canPlayType() to build a client
profile for the getTranscodeDecision API. Only codecs returning "probably"
are treated as supported for conservative compatibility.
* feat(ui): add transcode decision service with caching and pre-fetch
Standalone service that fetches getTranscodeDecision results, caches
them with an 11-hour TTL (1h buffer before 12h token expiry), and
supports bulk pre-fetching for upcoming queue items. Includes
invalidateAll() for handling stale tokens and getCachedDecision()
for synchronous cache reads.
* feat(ui): add fetch helper for getTranscodeDecision endpoint
POST-based Subsonic API call that sends the browser's codec profile
and returns the transcode decision including the JWT transcodeParams
token for subsequent streaming.
* feat(ui): wire transcode decision service singleton
Module index that creates the service singleton with the real fetch
function and re-exports the browser profile detector.
* feat(ui): add Redux transcoding reducer for browser profile state
Store the detected browser codec profile in Redux so it's available
globally. The profile is set once at startup and used by the decision
service when calling getTranscodeDecision.
* feat(ui): integrate transcode decision into player musicSrc
Replace static stream URLs with lazy musicSrc functions that fetch
a transcode decision before playback. Falls back to the old stream
endpoint if the decision fetch fails or if no browser profile is set.
* feat(ui): detect browser profile and pre-fetch transcode decisions
Run codec detection once when the Player mounts, storing the profile
in both the decision service and Redux. Pre-fetch decisions for the
next 3 songs when the queue or play position changes.
* feat(ui): handle stale tokens and replace audio preload with decision pre-fetch
On audio playback error, invalidate all cached transcode decisions
and pre-fetch fresh decisions for upcoming songs. Replace the old
Audio element preload with decision pre-fetching to warm the cache
for instant playback transitions.
* feat(ui): show transcode format in QualityInfo chip
When transcode decision data is available, QualityInfo now shows
"FLAC → OPUS 128" instead of just the source format. The new props
are optional, so existing usages in song lists, album songs, playlists,
and shares are unaffected.
* feat(ui): display transcode status in player quality badge
AudioTitle now reads the cached transcode decision for the current
track and passes it to QualityInfo, showing "FLAC → OPUS 128" when
transcoding or the normal format when direct playing.
* chore(ui): format and lint transcode decision integration
* refactor(ui): use JWT exp claim for decision cache expiry
Replace the hardcoded 11-hour TTL with actual token expiration
decoded from the JWT's exp claim. Each cache entry is now validated
against its own token's lifetime, adapting automatically to server
configuration changes. Tokens without an exp claim are treated as
expired and re-fetched immediately.
* fix(ui): resolve transcode URLs eagerly on browser refresh
Instead of setting musicSrc to a function on queue refresh (which
breaks the player's identity matching and can't survive JSON
serialization), resolve transcode decisions for the current and
next few tracks before dispatching, passing string URLs to the
reducer.
Also simplifies code: extract makeMusicSrc helper, add
resolveStreamUrl to decisionService, use httpClient instead of
raw fetch, and remove barrel file test.
* chore(ui): fix prettier formatting in Player.jsx
* fix(ui): use ref to avoid stale closure in mount-only transcode effect
Split the mount effect into profile detection + URL resolution, using a
ref for playerState so the effect correctly reads the latest queue without
needing playerState in the dependency array (which would cause it to
re-run on every queue/position change).
* fix(ui): address code review feedback on transcode integration
- Use jwt-decode for JWT parsing instead of manual atob (handles base64url)
- Guard resolveStreamUrl to fall back to direct stream when decision is null
- Fix savedPlayIndex -1 bug in PLAYER_REFRESH_QUEUE (findIndex returns -1)
* docs: improve comments on JWT exp claim decoding in decision service
Signed-off-by: Deluan <deluan@navidrome.org>
---------
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(artwork): search parent folders for album cover art in multi-disc layouts
When albums have tracks in subdirectories (e.g., CD1/, CD2/), Navidrome
only searched those subdirectories for cover images. This meant cover art
placed in the album's root folder (e.g., "Artist/Album/cover.jpg") was
not found. Now loadAlbumFoldersPaths also queries parent folders of the
album's media folders, so cover art in the album root is discovered.
* fix(artwork): simplify parent folder detection for album cover art lookup
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(album): propagate non-ErrNotFound errors from parent folder lookup
Signed-off-by: Deluan <deluan@navidrome.org>
---------
Signed-off-by: Deluan <deluan@navidrome.org>
Add comprehensive e2e tests for getTranscodeDecision and
getTranscodeStream endpoints covering direct play, transcoding,
error handling, and round-trip token validation. Refactor
buildPostReq to reuse buildReq for auth params, remove unused
WAV/AAC test tracks, and consolidate duplicate test assertions.
The probe_data column was added with DEFAULT NULL in migration
20260307175815, which causes sql.Scan errors when reading into Go
string fields. This migration drops and recreates the column with
DEFAULT '' NOT NULL to prevent NULL scan errors.
* feat(subsonic): implement transcode decision logic and codec handling for media files
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(subsonic): update codec limitation structure and decision logic for improved clarity
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(transcoding): update bitrate handling to use kilobits per second (kbps) across transcode decision logic
Signed-off-by: Deluan <deluan@navidrome.org>
* refactor(transcoding): simplify container alias handling in matchesContainer function
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(transcoding): enforce POST method for GetTranscodeDecision and handle non-POST requests
Signed-off-by: Deluan <deluan@navidrome.org>
* feat(transcoding): add enums for protocol, comparison operators, limitations, and codec profiles in transcode decision logic
Signed-off-by: Deluan <deluan@navidrome.org>
* refactor(transcoding): streamline limitation checks and applyLimitation logic for improved readability and maintainability
Signed-off-by: Deluan <deluan@navidrome.org>
* refactor(transcoding): replace strings.EqualFold with direct comparison for protocol and limitation checks
Signed-off-by: Deluan <deluan@navidrome.org>
* refactor(transcoding): rename token methods to CreateTranscodeParams and ParseTranscodeParams for clarity
Signed-off-by: Deluan <deluan@navidrome.org>
* refactor(transcoding): enhance logging for transcode decision process and client info conversion
Signed-off-by: Deluan <deluan@navidrome.org>
* refactor(transcoding): rename TranscodeDecision to Decider and update related methods for clarity
Signed-off-by: Deluan <deluan@navidrome.org>
* refactor(transcoding): enhance transcoding config lookup logic for audio codecs
Signed-off-by: Deluan <deluan@navidrome.org>
* refactor(transcoding): enhance transcoding options with sample rate support and improve command handling
Signed-off-by: Deluan <deluan@navidrome.org>
* refactor(transcoding): add bit depth support for audio transcoding and enhance related logic
Signed-off-by: Deluan <deluan@navidrome.org>
* refactor(transcoding): enhance AAC command handling and support for audio channels in streaming
Signed-off-by: Deluan <deluan@navidrome.org>
* refactor(transcoding): streamline transcoding logic by consolidating stream parameter handling and enhancing alias mapping
Signed-off-by: Deluan <deluan@navidrome.org>
* refactor(transcoding): update default command handling and add codec support for transcoding
Signed-off-by: Deluan <deluan@navidrome.org>
* fix: implement noopDecider for transcoding decision handling in tests
Signed-off-by: Deluan <deluan@navidrome.org>
* fix: address review findings for OpenSubsonic transcoding PR
Fix multiple issues identified during code review of the transcoding
extension: add missing return after error in shared stream handler
preventing nil pointer panic, replace dead r.Body nil check with
MaxBytesReader size limit, distinguish not-found from other DB errors,
fix bpsToKbps integer truncation with rounding, add "pcm" to
isLosslessFormat for consistency with model.IsLossless(), add
sampleRate/bitDepth/channels to streaming log, fix outdated test
comment, and add tests for conversion functions and GetTranscodeStream
parameter passing.
* feat(transcoding): add sourceUpdatedAt to decision and validate transcode parameters
Signed-off-by: Deluan <deluan@navidrome.org>
* fix: small issues
Updated mock AAC transcoding command to use the new default (ipod with
fragmented MP4) matching the migration, ensuring tests exercise the same
buildDynamicArgs code path as production. Improved archiver test mock to
match on the whole StreamRequest struct instead of decomposing fields,
making it resilient to future field additions. Added named constants for
JWT claim keys in the transcode token and wrapped ParseTranscodeParams
errors with ErrTokenInvalid for consistency. Documented the IsLossless
BitDepth fallback heuristic as temporary until Codec column is populated.
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(transcoding): adapt transcode claims to struct-based auth.Claims
Updated transcode token handling to use the struct-based auth.Claims
introduced on master, replacing the previous map[string]any approach.
Extended auth.Claims with transcoding-specific fields (MediaID, DirectPlay,
UpdatedAt, Channels, SampleRate, BitDepth) and added float64 fallback in
ClaimsFromToken for numeric claims that lose their Go type during JWT
string serialization. Also added the missing lyrics parameter to all
subsonic.New() calls in test files.
* feat(model): add ProbeData field and UpdateProbeData repository method
Add probe_data TEXT column to media_file for caching ffprobe results.
Add UpdateProbeData to MediaFileRepository interface and implementations.
Use hash:"ignore" tag so probe data doesn't affect MediaFile fingerprints.
* feat(ffmpeg): add ProbeAudioStream for authoritative audio metadata
Add ProbeAudioStream to FFmpeg interface, using ffprobe to extract
codec, profile, bitrate, sample rate, bit depth, and channels.
Parse bits_per_raw_sample as fallback for FLAC/ALAC bit depth.
Normalize "unknown" profile to empty string.
All parseProbeOutput tests use real ffprobe JSON from actual files.
* feat(transcoding): integrate ffprobe into transcode decisions
Add ensureProbed to probe media files on first transcode decision,
caching results in probe_data. Build SourceStream from probe data
with fallback to tag-based metadata.
Refactor decision logic to pass StreamDetails instead of MediaFile,
enabling codec profile limitations (e.g., audioProfile) to use
probe data. Add normalizeProbeCodec to map ffprobe codec names
(dsd_lsbf_planar, pcm_s16le) to internal names (dsd, pcm).
NewDecider now accepts ffmpeg.FFmpeg; wire_gen.go regenerated.
* feat(transcoding): add DevEnableMediaFileProbe config flag
Add DevEnableMediaFileProbe (default true) to allow disabling ffprobe-
based media file probing as a safety fallback. When disabled, the
decider uses tag-based metadata from the scanner instead.
* test(transcode): add ensureProbed unit tests
Test probing when ProbeData is empty, skipping when already set,
error propagation from ffprobe, and DevEnableMediaFileProbe flag.
* refactor(ffmpeg): use command constant and select_streams for ProbeAudioStream
Move ffprobe arguments to a probeAudioStreamCmd constant, following the
same pattern as extractImageCmd and probeCmd. Add -select_streams a:0 to
only probe the first audio stream, avoiding unnecessary parsing of video
and artwork streams. Derive the ffprobe binary path safely using
filepath.Dir/Base instead of replacing within the full path string.
* refactor(transcode): decouple transcode token claims from auth.Claims
Remove six transcode-specific fields (MediaID, DirectPlay, UpdatedAt,
Channels, SampleRate, BitDepth) from auth.Claims, which is shared with
session and share tokens. Transcode tokens are signed parameter-passing
tokens, not authentication tokens, so coupling them to auth created
misleading dependencies.
The transcode package now owns its own JWT claim serialization via
Decision.toClaimsMap() and paramsFromToken(), using generic
auth.EncodeToken/DecodeAndVerifyToken wrappers that keep TokenAuth
encapsulated. Wire format (JWT claim keys) is unchanged, so in-flight
tokens remain compatible.
Signed-off-by: Deluan <deluan@navidrome.org>
* refactor(transcode): simplify code after review
Extract getIntClaim helper to eliminate repeated int/int64/float64 JWT
claim extraction pattern in paramsFromToken and ClaimsFromToken. Rewrite
checkIntLimitation as a one-liner delegating to applyIntLimitation.
Return probe result from ensureProbed to avoid redundant JSON round-trip.
Extract toResponseStreamDetails helper and mediaTypeSong constant in
the API layer, and use transcode.ProtocolHTTP constant instead of
hardcoded string.
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(ffmpeg): enhance bit_rate parsing logic for audio streams
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(transcode): improve code review findings across transcode implementation
- Fix parseProbeData to return nil on JSON unmarshal failure instead of
a zero-valued struct, preventing silent degradation of source stream details
- Use probe-resolved codec for lossless detection in buildSourceStream
instead of the potentially stale scanner data
- Remove MediaFile.IsLossless() (dead code) and consolidate lossless
detection in isLosslessFormat(), using codec name only — bit depth is
not reliable since lossy codecs like ADPCM report non-zero values
- Add "wavpack" to lossless codec list (ffprobe codec_name for WavPack)
- Guard bpsToKbps against negative input values
- Fix misleading comment in buildTemplateArgs about conditional injection
- Avoid leaking internal error details in Subsonic API responses
- Add missing test for ErrNotFound branch in GetTranscodeDecision
- Add TODO for hardcoded protocol in toResponseStreamDetails
* refactor(transcode): streamline transcoding command lookup and format resolution
Signed-off-by: Deluan <deluan@navidrome.org>
* feat(transcode): implement server-side transcoding override for player formats
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(transcode): honor bit depth and channel constraints in transcoding selection
selectTranscodingOptions only checked sample rate when deciding whether
same-format transcoding was needed, ignoring requested bit depth and
channel reductions. This caused the streamer to return raw audio when
the transcode decision requested downmix or bit-depth conversion.
* refactor(transcode): unify streaming decision engine via MakeDecision
Move transcoding decision-making out of mediaStreamer and into the
subsonic Stream/Download handlers, using transcode.Decider.MakeDecision
as the single decision engine. This eliminates selectTranscodingOptions
and the mismatch between decision and streaming code paths (decision
used LookupTranscodeCommand with built-in fallbacks, while streaming
used FindByFormat which only checked the DB).
- Add DecisionOptions with SkipProbe to MakeDecision so the legacy
streaming path never calls ffprobe
- Add buildLegacyClientInfo to translate legacy stream params (format,
maxBitRate, DefaultDownsamplingFormat) into a synthetic ClientInfo
- Add resolveStreamRequest on the subsonic Router to resolve legacy
params into a fully specified StreamRequest via MakeDecision
- Simplify DoStream to a dumb executor that receives pre-resolved params
- Remove selectTranscodingOptions entirely
Signed-off-by: Deluan <deluan@navidrome.org>
* refactor(transcode): move MediaStreamer into core/transcode and unify StreamRequest
Moved MediaStreamer, Stream, TranscodingCache and related types from
core/media_streamer.go into core/transcode/, eliminating the duplicate
StreamRequest type. The transcode.StreamRequest now carries all fields
(ID, Format, BitRate, SampleRate, BitDepth, Channels, Offset) and
ResolveStream returns a fully-populated value, removing manual field
copying at every call site. Also moved buildLegacyClientInfo into the
transcode package alongside ResolveStream, and unexported
ParseTranscodeParams since it was only used internally by
ValidateTranscodeParams.
* refactor(transcode): rename Decider methods and unexport Params type
Rename ResolveStream → ResolveRequest and ValidateTranscodeParams →
ResolveRequestFromToken for clarity and consistency. The new
ResolveRequestFromToken returns a StreamRequest directly (instead of
the intermediate Params type), eliminating manual Params→StreamRequest
conversion in callers. Unexport Params to params since it is now only
used internally for JWT token parsing.
* test(transcode): remove redundant tests and use constants
Remove tests that duplicate coverage from integration-level tests
(toClaimsMap, paramsFromToken round-trips, applyServerOverride direct
call, duplicate 410 handler test). Replace raw "http" strings with
ProtocolHTTP constant. Consolidate lossy -sample_fmt tests into
DescribeTable.
* refactor(transcode): split oversized files into focused modules
Split transcode.go and transcode_test.go into focused files by concern:
- decider.go: decision engine (MakeDecision, direct play/transcode evaluation, probe)
- token.go: JWT token encode/decode (params, toClaimsMap, paramsFromToken, CreateTranscodeParams, ResolveRequestFromToken)
- legacy_client.go: legacy Subsonic bridge (buildLegacyClientInfo, ResolveRequest)
- codec_test.go: isLosslessFormat and normalizeProbeCodec tests
- token_test.go: token round-trip and ResolveRequestFromToken tests
Moved the Decider interface from types.go to decider.go to keep it near
its implementation, and cleaned up types.go to contain only pure type
definitions and constants. No public API changes.
* refactor(transcode): reorder parameters in applyServerOverride function
Signed-off-by: Deluan <deluan@navidrome.org>
* test(e2e): add NewTestStream function and implement spyStreamer for testing
Signed-off-by: Deluan <deluan@navidrome.org>
---------
Signed-off-by: Deluan <deluan@navidrome.org>
* feat(playlists): add percentage-based limits to smart playlists
Add a new `limitPercent` JSON field to Criteria that allows smart playlist
limits to be expressed as a percentage of matching tracks rather than a
fixed number. For example, a playlist matching 450 songs with a 10% limit
returns 45 songs, scaling dynamically as the library grows.
When `limitPercent` is set, refreshSmartPlaylist runs a COUNT query first
to determine the total matching tracks, then resolves the percentage to an
absolute LIMIT before executing the main query. The fixed `limit` field
takes precedence when both are set. Values are clamped to [0, 100] during
JSON unmarshaling.
No database migration is needed since rules are stored as a JSON string.
* fix(criteria): validate percentage limit range in IsPercentageLimit method
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(criteria): ensure idempotency of ToSql method for expressions
Signed-off-by: Deluan <deluan@navidrome.org>
---------
Signed-off-by: Deluan <deluan@navidrome.org>
* feat(plugins): add lyrics provider plugin capability
Refactor the lyrics system from a static function to an interface-based
service that supports WASM plugin providers. Plugins listed in the
LyricsPriority config (alongside "embedded" and file extensions) are
now resolved through the plugin system.
Includes capability definition, Go/Rust PDK, adapter, Wire integration,
and tests for plugin fallback behavior.
* test(plugins): add lyrics capability integration test with test plugin
* fix(plugins): default lyrics language to 'xxx' when plugin omits it
Per the OpenSubsonic spec, the server must return 'und' or 'xxx' when
the lyrics language is unknown. The lyrics plugin adapter was passing
an empty string through when a plugin didn't provide a language value.
This defaults the language to 'xxx', consistent with all other callers
of model.ToLyrics() in the codebase.
* refactor(plugins): rename lyrics import to improve clarity
Signed-off-by: Deluan <deluan@navidrome.org>
* refactor(lyrics): update TrackInfo description for clarity
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(lyrics): enhance lyrics plugin handling and case sensitivity
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(plugins): update payload type to string with byte format for task data
Signed-off-by: Deluan <deluan@navidrome.org>
---------
Signed-off-by: Deluan <deluan@navidrome.org>
* feat(plugins): define TaskQueue host service interface
Add the TaskQueueService interface with CreateQueue, Enqueue,
GetTaskStatus, and CancelTask methods plus QueueConfig struct.
* feat(plugins): define TaskWorker capability for task execution callbacks
* feat(plugins): add taskqueue permission to manifest schema
Add TaskQueuePermission with maxConcurrency option.
* feat(plugins): implement TaskQueue service with SQLite persistence and workers
Per-plugin SQLite database with queues and tasks tables. Worker goroutines
dequeue tasks and invoke nd_task_execute callback. Exponential backoff
retries, rate limiting via delayMs, automatic cleanup of terminal tasks.
* feat(plugins): require TaskWorker capability for taskqueue permission
* feat(plugins): register TaskQueue host service in manager
* feat(plugins): add test-taskqueue plugin for integration testing
* feat(plugins): add integration tests for TaskQueue host service
* docs: document TaskQueue module for persistent task queues
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(plugins): harden TaskQueue host service with validation and safety improvements
Add input validation (queue name length, payload size limits), extract
status string constants to eliminate raw SQL literals, make CreateQueue
idempotent via upsert for crash recovery, fix RetentionMs default check
for negative values, cap exponential backoff at 1 hour to prevent
overflow, and replace manual mutex-based delay enforcement with
rate.Limiter from golang.org/x/time/rate for correct concurrent worker
serialization.
* refactor(plugins): remove capability check for TaskWorker in TaskQueue host service
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(plugins): use context-aware database execution in TaskQueue host service
Signed-off-by: Deluan <deluan@navidrome.org>
* refactor(plugins): streamline task queue configuration and error handling
Signed-off-by: Deluan <deluan@navidrome.org>
* feat(plugins): increase maxConcurrency for task queue and handle budget exhaustion
Signed-off-by: Deluan <deluan@navidrome.org>
* refactor(plugins): simplify goroutine management in task queue service
Signed-off-by: Deluan <deluan@navidrome.org>
* feat(plugins): update TaskWorker interface to return status messages and refactor task queue service
Signed-off-by: Deluan <deluan@navidrome.org>
* feat(plugins): add ClearQueue function to remove pending tasks from a specified queue
Signed-off-by: Deluan <deluan@navidrome.org>
* refactor(plugins): use migrateDB for task queue schema and fix constant name collision
Replaced the raw db.Exec call in createTaskQueueSchema with migrateDB,
matching the pattern used by createKVStoreSchema. This enables version-tracked
schema migrations via SQLite's PRAGMA user_version, allowing future schema
changes to be appended incrementally. Also renamed cleanupInterval to
taskCleanupInterval to resolve a redeclaration conflict with host_kvstore.go.
* regenerate PDKs
Signed-off-by: Deluan <deluan@navidrome.org>
---------
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(persistence): add nil guards to cursor wrapping in folder and mediafile repos
Prevent SIGSEGV panic when queryWithStableResults yields a zero-value
struct on the rows.Err() path (e.g., "database is locked" during
concurrent scanning). Extract cursor wrapping into wrapFolderCursor and
wrapMediaFileCursor with nil checks matching the existing pattern in
album_repository.go.
Fixes#5138
* fix(persistence): wrap original cursor error in nil guard messages
Use %w to preserve the underlying error (e.g., "database is locked")
so callers can use errors.Is/As for root cause analysis. Tests now
verify the original error is accessible via errors.Is.
* fix(persistence): add nil guards and error wrapping in album, folder, and mediafile cursor functions
Signed-off-by: Deluan <deluan@navidrome.org>
---------
Signed-off-by: Deluan <deluan@navidrome.org>
Allow administrators to disable playlist cover art upload/removal for
non-admin users via the new EnableCoverArtUpload config option (default: true).
- Guard uploadPlaylistImage and deletePlaylistImage endpoints (403 for non-admin when disabled)
- Set CoverArtRole in Subsonic GetUser/GetUsers responses based on config and admin status
- Pass config to frontend and conditionally hide upload/remove UI controls
- Admins always retain upload capability regardless of setting
* test(plugins): speed up integration tests with shared wazero cache
Reduce plugin test suite runtime from ~22s to ~12s by:
- Creating a shared wazero compilation cache directory in TestPlugins()
and setting conf.Server.CacheFolder globally so all test Manager
instances reuse compiled WASM binaries from disk cache
- Moving 6 createTestManager* calls from inside It blocks to BeforeAll
blocks in scrobbler_adapter_test.go and manager_call_test.go
- Replacing time.Sleep(2s) in KVStore TTL test with Eventually polling
- Reducing WebSocket callback sleeps from 100ms to 10ms
Signed-off-by: Deluan <deluan@navidrome.org>
* test(plugins): enhance websocket tests by storing server messages for verification
Signed-off-by: Deluan <deluan@navidrome.org>
---------
Signed-off-by: Deluan <deluan@navidrome.org>
Introduced a typed Claims struct in core/auth to replace the raw
map[string]any approach used for JWT claims throughout the codebase.
This provides compile-time safety and better readability when creating,
validating, and extracting JWT tokens. Also upgraded lestrrat-go/jwx
from v2 to v3 and go-chi/jwtauth to v5.4.0, adapting all callers to
the new API where token accessor methods now return tuples instead of
bare values. Updated all affected handlers, middleware, and tests.
Signed-off-by: Deluan <deluan@navidrome.org>
* feat(playlist): add migration for playlist image field rename and external URL
* refactor(playlist): rename ImageFile to UploadedImage and ArtworkPath to UploadedImagePath
Rename playlist model fields and methods for clarity in preparation for
adding external image URL and sidecar image support. Add the new
ExternalImageURL field to the Playlist model.
* feat(playlist): parse #EXTALBUMARTURL directive in M3U imports
* feat(playlist): always sync ExternalImageURL on re-scan, preserve UploadedImage
* feat(artwork): add sidecar image discovery and cache invalidation for playlists
Add playlist sidecar image support to the artwork reader fallback chain.
A sidecar image (e.g., MyPlaylist.jpg next to MyPlaylist.m3u) is discovered
via case-insensitive base name matching using model.IsImageFile(). Cache
invalidation uses max(playlist.UpdatedAt, imageFile.ModTime()) to bust
stale artwork when sidecar or ExternalImageURL local files change.
* feat(artwork): add external image URL source to playlist artwork reader
Add fromPlaylistExternalImage source function that resolves playlist
cover art from ExternalImageURL, supporting both HTTP(S) URLs (via
the existing fromURL helper) and local file paths (via os.Open).
Insert it in the Reader() fallback chain between sidecar and tiled cover.
* refactor(artwork): simplify playlist artwork source functions
Extract shared fromLocalFile helper, use url.Parse for scheme check,
and collapse sidecar directory scan conditions.
* test(artwork): remove redundant fromPlaylistSidecar tests
These tests duplicated scenarios already covered by findPlaylistSidecarPath
tests combined with fromLocalFile (tested via fromPlaylistExternalImage).
After refactoring fromPlaylistSidecar to a one-liner composing those two
functions, the wrapper tests add no value.
* fix(playlist): address security review comments from PR #5131:
- Use url.PathUnescape instead of url.QueryUnescape for file:// URLs so
that '+' in filenames is preserved (not decoded as space).
- Validate all local image paths (file://, absolute, relative) against
known library boundaries via libraryMatcher, rejecting paths outside
any configured library.
- Harden #EXTALBUMARTURL against path traversal and SSRF by adding EnableM3UExternalAlbumArt config flag (default false, also
disabled by EnableExternalServices=false) to gate HTTP(S) URL storage
at parse time and fetching at read time (defense in depth).
- Log a warning when os.ReadDir fails in findPlaylistSidecarPath for
diagnosability.
- Extract resolveLocalPath helper to simplify resolveImageURL.
Signed-off-by: Deluan <deluan@navidrome.org>
* feat(playlist): implement human-friendly filename generation for uploaded playlist cover images
Signed-off-by: Deluan <deluan@navidrome.org>
---------
Signed-off-by: Deluan <deluan@navidrome.org>
Changed the TTL expiration check from strict greater-than to greater-or-equal
in the notExpiredFilter SQL condition. SQLite's datetime has second-level
precision, so a 1-second TTL set late in a second could appear expired
immediately when read at the next second boundary (e.g. expires_at of T+1
fails the check 'T+1 > T+1'). Updated the cleanup query consistently to use
strict less-than, so rows are only deleted after their expiration second has
fully passed.
Plugins that entered an error state (e.g., incompatible with the
Navidrome version) would remain in that state across restarts, blocking
the user from retrying. This adds a ClearErrors method to
PluginRepository that resets the last_error field on all plugins, and
calls it during plugin manager startup before syncing and loading.
Signed-off-by: Deluan <deluan@navidrome.org>
* feat(playlist): add custom playlist cover art upload - #406
Allow users to upload, view, and remove custom cover images for playlists.
Custom images take priority over the auto-generated tiled artwork.
Backend:
- Add `image_path` column to playlist table (migration with proper rollback)
- Add `SetImage`/`RemoveImage` methods to playlist service
- Add `POST/DELETE /api/playlist/{id}/image` endpoints
- Prioritize custom image in artwork reader pipeline
- Clean up image files on playlist deletion
- Use glob-based cleanup to prevent orphaned files across format changes
- Reject uploads with undetermined image type (400)
Frontend:
- Hover overlay on playlist cover with upload (camera) and remove (trash) buttons
- Lightbox for full-size cover art viewing
- Cover art thumbnails in the playlist list view
- Loading/error states and i18n strings
Closes#406
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: adrbn <128328324+adrbn@users.noreply.github.com>
* refactor: rename playlist image path migration file
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(playlist): address review feedback for cover art upload - #406
- Use httpClient instead of raw fetch for image upload/remove
- Revert glob cleanup to simple imagePath check
- Add log.Error before all error HTTP responses
- Add backend tests for SetImage and RemoveImage
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: adrbn <128328324+adrbn@users.noreply.github.com>
* refactor(playlist): use Playlist.ArtworkPath() for image storage
Migrate all playlist image path handling to use the new
Playlist.ArtworkPath() method as the single source of truth. The DB now
stores only the filename (e.g. "pls-1.jpg") instead of a relative path,
and images are stored under {DataFolder}/artwork/playlist/ instead of
{DataFolder}/playlist_images/. The artwork root directory is created at
startup alongside DataFolder and CacheFolder. This also removes the
conf dependency from reader_playlist.go since path resolution is now
fully encapsulated in the model.
Signed-off-by: Deluan <deluan@navidrome.org>
* refactor(playlist): streamline artwork image selection logic
Signed-off-by: Deluan <deluan@navidrome.org>
* refactor: move translation keys, add pt-BR translations
Signed-off-by: Deluan <deluan@navidrome.org>
* refactor(playlist): rename image_path to image_file
Rename the playlist cover art column and field from image_path/ImagePath
to image_file/ImageFile across the migration, model, service, tests, and
UI. The new name more accurately describes what the field stores (a
filename, not a path) and aligns with the existing ImageFiles/IsImageFile
naming conventions in the codebase.
---------
Signed-off-by: adrbn <128328324+adrbn@users.noreply.github.com>
Signed-off-by: Deluan <deluan@navidrome.org>
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
Co-authored-by: Deluan Quintão <deluan@navidrome.org>
* feat(plugins): add expires_at column to kvstore schema
* feat(plugins): filter expired keys in kvstore Get, Has, List
* feat(plugins): add periodic cleanup of expired kvstore keys
* feat(plugins): add SetWithTTL, DeleteByPrefix, and GetMany to kvstore
Add three new methods to the KVStore host service:
- SetWithTTL: store key-value pairs with automatic expiration
- DeleteByPrefix: remove all keys matching a prefix in one operation
- GetMany: retrieve multiple values in a single call
All methods include comprehensive unit tests covering edge cases,
expiration behavior, size tracking, and LIKE-special characters.
* feat(plugins): regenerate code and update test plugin for new kvstore methods
Regenerate host function wrappers and PDK bindings for Go, Python,
and Rust. Update the test-kvstore plugin to exercise SetWithTTL,
DeleteByPrefix, and GetMany.
* feat(plugins): add integration tests for new kvstore methods
Add WASM integration tests for SetWithTTL, DeleteByPrefix, and GetMany
operations through the plugin boundary, verifying end-to-end behavior
including TTL expiration, prefix deletion, and batch retrieval.
* fix(plugins): address lint issues in kvstore implementation
Handle tx.Rollback error return and suppress gosec false positive
for parameterized SQL query construction in GetMany.
* fix(plugins): Set clears expires_at when overwriting a TTL'd key
Previously, calling Set() on a key that was stored with SetWithTTL()
would leave the expires_at value intact, causing the key to silently
expire even though Set implies permanent storage.
Also excludes expired keys from currentSize calculation at startup.
* refactor(plugins): simplify kvstore by removing in-memory size cache
Replaced the in-memory currentSize cache (atomic.Int64), periodic cleanup
timer, and mutex with direct database queries for storage accounting.
This eliminates race conditions and cache drift issues at negligible
performance cost for plugin-sized datasets. Also unified Set and
SetWithTTL into a shared setValue method, simplified DeleteByPrefix to
use RowsAffected instead of a transaction, and added an index on
expires_at for efficient expiration filtering.
* feat(plugins): add generic SQLite migration helper and refactor kvstore schema
Add a reusable migrateDB helper that tracks schema versions via SQLite's
PRAGMA user_version and applies pending migrations transactionally. Replace
the ad-hoc createKVStoreSchema function in kvstore with a declarative
migrations slice, making it easy to add future schema changes. Remove the
now-redundant schema migration test since migrateDB has its own test suite
and every kvstore test exercises the migrations implicitly.
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(plugins): harden kvstore with explicit NULL handling, prefix validation, and cleanup timeout
- Use sql.NullString for expires_at to explicitly send NULL instead of
relying on datetime('now', '') returning NULL by accident
- Reject empty prefix in DeleteByPrefix to prevent accidental data wipe
- Add 5s timeout context to cleanupExpired on Close
- Replace time.Sleep in unit tests with pre-expired timestamps
Signed-off-by: Deluan <deluan@navidrome.org>
* refactor(plugins): use batch processing in GetMany
Process keys in chunks of 200 using slice.CollectChunks to avoid
hitting SQLite's SQLITE_MAX_VARIABLE_NUMBER limit with large key sets.
* feat(plugins): add periodic cleanup goroutine for expired kvstore keys
Use the manager's context to control a background goroutine that purges
expired keys every hour, stopping naturally on shutdown when the context
is cancelled.
---------
Signed-off-by: Deluan <deluan@navidrome.org>
* feat(plugins): mount library directories as read-only by default
Add an AllowWriteAccess boolean to the plugin model, defaulting to
false. When off, library directories are mounted with the extism "ro:"
prefix (read-only). Admins can explicitly grant write access via a new
toggle in the Library Permission card.
* test: add tests to buildAllowedPaths
Signed-off-by: Deluan <deluan@navidrome.org>
* chore: improve allowed paths logging for library access
Signed-off-by: Deluan <deluan@navidrome.org>
---------
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(plugins): add base64 handling for []byte and remove raw=true
Go's json.Marshal automatically base64-encodes []byte fields, but Rust's
serde_json serializes Vec<u8> as a JSON array and Python's json.dumps
raises TypeError on bytes. This fixes both directions of plugin
communication by adding proper base64 encoding/decoding in generated
client code.
For Rust templates (client and capability): adds a base64_bytes serde
helper module with #[serde(with = "base64_bytes")] on all Vec<u8> fields,
and adds base64 as a dependency. For Python templates: wraps bytes params
with base64.b64encode() and responses with base64.b64decode().
Also removes the raw=true binary framing protocol from all templates,
the parser, and the Method type. The raw mechanism added complexity that
is no longer needed once []byte works properly over JSON.
* fix(plugins): update production code and tests for base64 migration
Remove raw=true annotation from SubsonicAPI.CallRaw, delete all raw
test fixtures, remove raw-related test cases from parser, generator, and
integration tests, and add new test cases validating base64 handling
for Rust and Python templates.
* fix(plugins): update golden files and regenerate production code
Update golden test fixtures for codec and comprehensive services to
include base64 handling for []byte fields. Regenerate all production
PDK code (Go, Rust, Python) and host wrappers to use standard JSON
with base64-encoded byte fields instead of binary framing protocol.
* refactor: remove base64 helper duplication from rust template
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(plugins): add base64 dependency to capabilities' Cargo.toml
Signed-off-by: Deluan <deluan@navidrome.org>
---------
Signed-off-by: Deluan <deluan@navidrome.org>
Move scheduler capability check from runtime (when callback fires) to
load-time validation in ValidateWithCapabilities. This ensures plugins
declaring the scheduler permission must export the nd_scheduler_callback
function, failing fast with a clear error instead of silently skipping
callbacks at runtime.
* feat(subsonic): append album version to album names in Subsonic API responses
Add AppendAlbumVersion config option (default: true) that appends the
album version tag to album names in Subsonic API responses, similar to
how AppendSubtitle works for track titles. This affects album names in
childFromAlbum and buildAlbumID3 responses.
Signed-off-by: Deluan <deluan@navidrome.org>
* feat(subsonic): append album version to media file album names in Subsonic API
Add FullAlbumName() to MediaFile that appends the album version tag,
mirroring the Album.FullName() behavior. Use it in childFromMediaFile
and fakePath to ensure media file responses also show the album version.
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(subsonic): use len() check for album version tag to prevent panic on empty slice
Use len(tags) > 0 instead of != nil to safely guard against empty
slices when accessing the first element of the album version tag.
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(subsonic): use FullName in buildAlbumDirectory and deduplicate FullName calls
Apply album.FullName() in buildAlbumDirectory (getMusicDirectory) so
album names are consistent across all Subsonic endpoints. Also compute
al.FullName() once in childFromAlbum to avoid redundant calls.
Signed-off-by: Deluan <deluan@navidrome.org>
* fix: use len() check in MediaFile.FullTitle() to prevent panic on empty slice
Apply the same safety improvement as FullAlbumName() and Album.FullName()
for consistency.
Signed-off-by: Deluan <deluan@navidrome.org>
* test: add tests for Album.FullName, MediaFile.FullTitle, and MediaFile.FullAlbumName
Cover all cases: config enabled/disabled, tag present, tag absent, and
empty tag slice.
Signed-off-by: Deluan <deluan@navidrome.org>
---------
Signed-off-by: Deluan <deluan@navidrome.org>
* feat(httpclient): implement HttpClient service for outbound HTTP requests in plugins
Signed-off-by: Deluan <deluan@navidrome.org>
* feat(httpclient): enhance SSRF protection by validating host requests against private IPs
Signed-off-by: Deluan <deluan@navidrome.org>
* feat(httpclient): support DELETE requests with body in HttpClient service
Signed-off-by: Deluan <deluan@navidrome.org>
* feat(httpclient): refactor HTTP client initialization and enhance redirect handling
Signed-off-by: Deluan <deluan@navidrome.org>
* refactor(http): standardize naming conventions for HTTP types and methods
Signed-off-by: Deluan <deluan@navidrome.org>
* refactor example plugin to use host.HTTPSend for improved error management
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(plugins): fix IPv6 SSRF bypass and wildcard host matching
Fix two bugs in the plugin HTTP/WebSocket host validation:
1. extractHostname now strips IPv6 brackets when no port is present
(e.g. "[::1]" → "::1"). Previously, net.SplitHostPort failed for
bracketed IPv6 without a port, leaving brackets intact. This caused
net.ParseIP to return nil, bypassing the private/loopback SSRF guard.
2. matchHostPattern now treats "*" as an allow-all pattern. Previously,
a bare "*" only matched via exact equality, so plugins declaring
requiredHosts: ["*"] (like webhook-rs) had all requests rejected.
---------
Signed-off-by: Deluan <deluan@navidrome.org>
* feat(server): add ExtAuth logout URL configuration (#4467)
When external authentication (reverse proxy auth) is active, the Logout
button is hidden because authentication is managed externally. Many
external auth services (Authelia, Authentik, Keycloak) provide a logout
URL that can terminate the session.
Add `ExtAuth.LogoutURL` config option that, when set, shows the Logout
button in the UI and redirects the user to the external auth provider's
logout endpoint instead of the Navidrome login page.
* feat(server): add validation for ExtAuth logout URL configuration
* feat(server): refactor ExtAuth logout URL validation to a reusable function
* fix(configuration): rename URL validation functions for consistency
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(configuration): rename URL validation functions for consistency
Signed-off-by: Deluan <deluan@navidrome.org>
---------
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(subsonic): optimize search3 for high-cardinality FTS queries
Use a two-phase query strategy for FTS5 searches to avoid the
performance penalty of expensive LEFT JOINs (annotation, bookmark,
library) on high-cardinality results like "the".
Phase 1 runs a lightweight query (main table + FTS index only) to get
sorted, paginated rowids. Phase 2 hydrates only those few rowids with
the full JOINs, making them nearly free.
For queries with complex ORDER BY expressions that reference joined
tables (e.g. artist search sorted by play count), the optimization is
skipped and the original single-query approach is used.
* fix(search): update order by clauses to include 'rank' for FTS queries
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(search): reintroduce 'rank' in Phase 2 ORDER BY for FTS queries
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(search): remove 'rank' from ORDER BY in non-FTS queries and adjust two-phase query handling
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(search): update FTS ranking to use bm25 weights and simplify ORDER BY qualification
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(search): refine FTS query handling and improve comments for clarity
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(search): refactor full-text search handling to streamline query strategy selection and improve LIKE fallback logic.
Increase e2e coverage for search3
Signed-off-by: Deluan <deluan@navidrome.org>
* refactor: enhance FTS column definitions and relevance weights
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(search): refactor Search method signatures to remove offset and size parameters, streamline query handling
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(search): allow single-character queries in search strategies and update related tests
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(search): make FTS Phase 1 treat Max=0 as no limit, reorganize tests
FTS Phase 1 unconditionally called Limit(uint64(options.Max)), which
produced LIMIT 0 when Max was zero. This diverged from applyOptions
where Max=0 means no limit. Now Phase 1 mirrors applyOptions: only add
LIMIT/OFFSET when the value is positive. Also moved legacy backend
integration tests from sql_search_fts_test.go to sql_search_like_test.go
and added regression tests for the Max=0 behavior on both backends.
* refactor: simplify callSearch function by removing variadic options and directly using QueryOptions
Signed-off-by: Deluan <deluan@navidrome.org>
* fix(search): implement ftsQueryDegraded function to detect significant content loss in FTS queries
Signed-off-by: Deluan <deluan@navidrome.org>
---------
Signed-off-by: Deluan <deluan@navidrome.org>
* feat(criteria): make album ratings available to smart playlist queries
Expose an "albumrating" field mapping to album annotations.
Signed-off-by: Valeri Sokolov <ulfurinn@ulfurinn.net>
* fix(criteria): use query parameters
Signed-off-by: Valeri Sokolov <ulfurinn@ulfurinn.net>
* feat: add album and artist annotation fields to smart playlists
Extend smart playlists to filter songs by album or artist annotations
(rating, loved, play count, last played, date loved, date rated). This
adds 12 new fields (6 album, 6 artist) with conditional JOINs that are
only added when the criteria or sort references them, avoiding
unnecessary query overhead. The album table JOIN is also removed since
media_file.album_id can be used directly.
---------
Signed-off-by: Valeri Sokolov <ulfurinn@ulfurinn.net>
Co-authored-by: Deluan <deluan@navidrome.org>
* refactor: move playlist business logic from repositories to core.Playlists service
Move authorization, permission checks, and orchestration logic from
playlist repositories to the core.Playlists service, following the
existing pattern used by core.Share and core.Library.
Changes:
- Expand core.Playlists interface with read, mutation, track management,
and REST adapter methods
- Add playlistRepositoryWrapper for REST Save/Update/Delete with
permission checks (follows Share/Library pattern)
- Simplify persistence/playlist_repository.go: remove isWritable(),
auth checks from Delete()/Put()/updatePlaylist()
- Simplify persistence/playlist_track_repository.go: remove
isTracksEditable() and permission checks from Add/Delete/Reorder
- Update Subsonic API handlers to route through service
- Update Native API handlers to accept core.Playlists instead of
model.DataStore
* test: add coverage for playlist service methods and REST wrapper
Add 30 new tests covering the service methods added during the playlist
refactoring:
- Delete: owner, admin, denied, not found
- Create: new playlist, replace tracks, admin bypass, denied, not found
- AddTracks: owner, admin, denied, smart playlist, not found
- RemoveTracks: owner, smart playlist denied, non-owner denied
- ReorderTrack: owner, smart playlist denied
- NewRepository wrapper: Save (owner assignment, ID clearing),
Update (owner, admin, denied, ownership change, not found),
Delete (delegation with permission checks)
Expand mockedPlaylistRepo with Get, Delete, Tracks, GetWithTracks, and
rest.Persistable methods. Add mockedPlaylistTrackRepo for track
operation verification.
* fix: add authorization check to playlist Update method
Added ownership verification to the Subsonic Update endpoint in the
playlist service layer. The authorization check was present in the old
repository code but was not carried over during the refactoring to the
service layer, allowing any authenticated user to modify playlists they
don't own via the Subsonic API. Also added corresponding tests for the
Update method's permission logic.
* refactor: improve playlist permission checks and error handling, add e2e tests
Signed-off-by: Deluan <deluan@navidrome.org>
* refactor: rename core.Playlists to playlists package and update references
Signed-off-by: Deluan <deluan@navidrome.org>
* refactor: rename playlists_internal_test.go to parse_m3u_test.go and update tests; add new parse_nsp.go and rest_adapter.go files
Signed-off-by: Deluan <deluan@navidrome.org>
* fix: block track mutations on smart playlists in Create and Update
Create now rejects replacing tracks on smart playlists (pre-existing
gap). Update now uses checkTracksEditable instead of checkWritable
when track changes are requested, restoring the protection that was
removed from the repository layer during the refactoring. Metadata-only
updates on smart playlists remain allowed.
* test: add smart playlist protection tests to ensure readonly behavior and mutation restrictions
* refactor: optimize track removal and renumbering in playlists
Signed-off-by: Deluan <deluan@navidrome.org>
* refactor: implement track reordering in playlists with SQL updates
Signed-off-by: Deluan <deluan@navidrome.org>
* refactor: wrap track deletion and reordering in transactions for consistency
Signed-off-by: Deluan <deluan@navidrome.org>
* refactor: remove unused getTracks method from playlistTrackRepository
Signed-off-by: Deluan <deluan@navidrome.org>
* refactor: optimize playlist track renumbering with CTE-based UPDATE
Replace the DELETE + re-INSERT renumbering strategy with a two-step
UPDATE approach using a materialized CTE and ROW_NUMBER() window
function. The previous approach (SELECT all IDs, DELETE all tracks,
re-INSERT in chunks of 200) required 13 SQL operations for a 2000-track
playlist. The new approach uses just 2 UPDATEs: first negating all IDs
to clear the positive space, then assigning sequential positions via
UPDATE...FROM with a CTE. This avoids the UNIQUE constraint violations
that affected the original correlated subquery while reducing per-delete
request time from ~110ms to ~12ms on a 2000-track playlist.
Signed-off-by: Deluan <deluan@navidrome.org>
* refactor: rename New function to NewPlaylists for clarity
Signed-off-by: Deluan <deluan@navidrome.org>
* refactor: update mock playlist repository and tests for consistency
Signed-off-by: Deluan <deluan@navidrome.org>
---------
Signed-off-by: Deluan <deluan@navidrome.org>
Gate the ScanOnStartup config on Scanner.Enabled so that setting
Scanner.Enabled=false prevents automatic startup scans. Other automatic
scan triggers (interrupted scan resume, PID change, post-migration) are
preserved regardless of the Enabled flag to maintain data integrity.
* build: add sqlite_fts5 build tag to enable FTS5 support
* feat: add SearchBackend config option (default: fts)
* feat: add buildFTS5Query for safe FTS5 query preprocessing
* feat: add FTS5 search backend with config toggle, refactor legacy search
- Add searchExprFunc type and getSearchExpr() for backend selection
- Rename fullTextExpr to legacySearchExpr
- Add ftsSearchExpr using FTS5 MATCH subquery
- Update fullTextFilter in sql_restful.go to use configured backend
* feat: add FTS5 migration with virtual tables, triggers, and search_participants
Creates FTS5 virtual tables for media_file, album, and artist with
unicode61 tokenizer and diacritic folding. Adds search_participants
column, populates from JSON, and sets up INSERT/UPDATE/DELETE triggers.
* feat: populate search_participants in PostMapArgs for FTS5 indexing
* test: add FTS5 search integration tests
* fix: exclude FTS5 virtual tables from e2e DB restore
The restoreDB function iterates all tables in sqlite_master and
runs DELETE + INSERT to reset state. FTS5 contentless virtual tables
cannot be directly deleted from. Since triggers handle FTS5 sync
automatically, simply skip tables matching *_fts and *_fts_* patterns.
* build: add compile-time guard for sqlite_fts5 build tag
Same pattern as netgo: compilation fails with a clear error if
the sqlite_fts5 build tag is missing.
* build: add sqlite_fts5 tag to reflex dev server config
* build: extract GO_BUILD_TAGS variable in Makefile to avoid duplication
* fix: strip leading * from FTS5 queries to prevent "unknown special query" error
* feat: auto-append prefix wildcard to FTS5 search tokens for broader matching
Every plain search token now gets a trailing * appended (e.g., "love" becomes
"love*"), so searching for "love" also matches "lovelace", "lovely", etc.
Quoted phrases are preserved as exact matches without wildcards. Results are
ordered alphabetically by name/title, so shorter exact matches naturally
appear first.
* fix: clarify comments about FTS5 operator neutralization
The comments said "strip" but the code lowercases operators to
neutralize them (FTS5 operators are case-sensitive). Updated comments
to accurately describe the behavior.
* fix: use fmt.Sprintf for FTS5 phrase placeholders
The previous encoding used rune('0'+index) which silently breaks with
10+ quoted phrases. Use fmt.Sprintf for arbitrary index support.
* fix: validate and normalize SearchBackend config option
Normalize the value to lowercase and fall back to "fts" with a log
warning for unrecognized values. This prevents silent misconfiguration
from typos like "FTS", "Legacy", or "fts5".
* refactor: improve documentation for build tags and FTS5 requirements
Signed-off-by: Deluan <deluan@navidrome.org>
* refactor: convert FTS5 query and search backend normalization tests to DescribeTable format
Signed-off-by: Deluan <deluan@navidrome.org>
* fix: add sqlite_fts5 build tag to golangci configuration
Signed-off-by: Deluan <deluan@navidrome.org>
* feat: add UISearchDebounceMs configuration option and update related components
Signed-off-by: Deluan <deluan@navidrome.org>
* fix: fall back to legacy search when SearchFullString is enabled
FTS5 is token-based and cannot match substrings within words, so
getSearchExpr now returns legacySearchExpr when SearchFullString
is true, regardless of SearchBackend setting.
* fix: add sqlite_fts5 build tag to CI pipeline and Dockerfile
* fix: add WHEN clauses to FTS5 AFTER UPDATE triggers
Added WHEN clauses to the media_file_fts_au, album_fts_au, and
artist_fts_au triggers so they only fire when FTS-indexed columns
actually change. Previously, every row update (e.g., play count, rating,
starred status) triggered an unnecessary delete+insert cycle in the FTS
shadow tables. The WHEN clauses use IS NOT for NULL-safe comparison of
each indexed column, avoiding FTS index churn for non-indexed updates.
* feat: add SearchBackend configuration option to data and insights components
Signed-off-by: Deluan <deluan@navidrome.org>
* fix: enhance input sanitization for FTS5 by stripping additional punctuation and special characters
Signed-off-by: Deluan <deluan@navidrome.org>
* feat: add search_normalized column for punctuated name search (R.E.M., AC/DC)
Add index-time normalization and query-time single-letter collapsing to
fix FTS5 search for punctuated names. A new search_normalized column
stores concatenated forms of punctuated words (e.g., "R.E.M." → "REM",
"AC/DC" → "ACDC") and is indexed in FTS5 tables. At query time, runs of
consecutive single letters (from dot-stripping) are collapsed into OR
expressions like ("R E M" OR REM*) to match both the original tokens and
the normalized form. This enables searching by "R.E.M.", "REM", "AC/DC",
"ACDC", "A-ha", or "Aha" and finding the correct results.
* refactor: simplify isSingleUnicodeLetter to avoid []rune allocation
Use utf8.DecodeRuneInString to check for a single Unicode letter
instead of converting the entire string to a []rune slice.
* feat: define ftsSearchColumns for flexible FTS5 search column inclusion
Signed-off-by: Deluan <deluan@navidrome.org>
* feat: update collapseSingleLetterRuns to return quoted phrases for abbreviations
Signed-off-by: Deluan <deluan@navidrome.org>
* feat: implement extractPunctuatedWords to handle artist/album names with embedded punctuation
Signed-off-by: Deluan <deluan@navidrome.org>
* feat: implement extractPunctuatedWords to handle artist/album names with embedded punctuation
Signed-off-by: Deluan <deluan@navidrome.org>
* refactor: punctuated word handling to improve processing of artist/album names
Signed-off-by: Deluan <deluan@navidrome.org>
* feat: add CJK support for search queries with LIKE filters
Signed-off-by: Deluan <deluan@navidrome.org>
* feat: enhance FTS5 search by adding album version support and CJK handling
Signed-off-by: Deluan <deluan@navidrome.org>
* refactor: search configuration to use structured options
Signed-off-by: Deluan <deluan@navidrome.org>
* feat: enhance search functionality to support punctuation-only queries and update related tests
Signed-off-by: Deluan <deluan@navidrome.org>
---------
Signed-off-by: Deluan <deluan@navidrome.org>
* chore(deps): update go-taglib fork with MKA/Matroska support
Bump deluan/go-taglib to cf75207bfff8, which upgrades the underlying
taglib to v2.2 and adds Matroska container format detection and
metadata handling (MKA audio files).
* chore(deps): update cross-taglib version to 2.2.0-1
Signed-off-by: Deluan <deluan@navidrome.org>
* chore(make): rename run-docker target to docker-run for consistency
Signed-off-by: Deluan <deluan@navidrome.org>
* chore(go-taglib): update version to 2.2 WASM and add debug logging
Signed-off-by: Deluan <deluan@navidrome.org>
* chore(deps): update go-taglib to v0.0.0-20260220032326 for MKA fixes
Signed-off-by: Deluan <deluan@navidrome.org>
---------
Signed-off-by: Deluan <deluan@navidrome.org>
The secondary color (#3c3836) matches the panel/table cell background,
making checked MuiSwitch thumbs invisible. Add MuiSwitch override using
Gruvbox cyan (#458588), consistent with existing interactive elements.
When using HTTP2, setting the writeTimeout too low causes the channel to
close before the keepAlive event has a chance of beeing sent.
Signed-off-by: rca <raphael.catolino@gmail.com>
Co-authored-by: Deluan Quintão <deluan@navidrome.org>
2026-02-17 14:47:20 -05:00
728 changed files with 52956 additions and 11134 deletions
log.Error(fmt.Sprintf("Invalid %s. Please read format spec at https://pkg.go.dev/github.com/robfig/cron#hdr-CRON_Expression_Format",field),"schedule",schedule,err)
}else{
c.Remove(id)
returnschedule,fmt.Errorf("invalid %s %q (see https://pkg.go.dev/github.com/robfig/cron#hdr-CRON_Expression_Format): %w",field,schedule,err)
}
returnschedule,err
returnschedule,nil
}
// validateURL checks if the provided URL is valid and has either http or https scheme.
// It returns a function that can be used as a hook to validate URLs in the config.
@@ -7,6 +7,6 @@ A new agent must comply with these simple implementation rules:
2) Implement one or more of the `*Retriever()` interfaces. That's where the agent's logic resides.
3) Register itself (in its `init()` function).
For an agent to be used it needs to be listed in the `Agents` config option (default is `"lastfm,spotify"`). The order dictates the priority of the agents
For an agent to be used it needs to be listed in the `Agents` config option (default is `"deezer,lastfm"`). The order dictates the priority of the agents
For a simple Agent example, look at the [local_agent](local_agent.go) agent source code.
Loaded 100 of 728 files, more files were not shown because too many files have changed in this diff.
Show more
Reference in new issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
