PeerByStableID did an O(n peers) scan, and an upcoming change needs
the same StableNodeID-to-NodeID resolution whenever prefs change (to
resolve the selected exit node for the route manager, which keys
peers by NodeID because that is the identity netmap delta mutations
carry). Maintain a nodeByStableID index alongside the existing
nodeByAddr and nodeByKey indexes, updated on full netmaps and on
delta mutations.
Updates #12542
Change-Id: Id1e5105a7470b02312533f0f46b69e6945cd62f0
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Like the earlier RemoteConfig change, gate Hostinfo.AllowsUpdate on
feature.IsRegistered("clientupdate") in addition to the
buildfeatures.HasClientUpdate build-tag const. tsnet binaries don't
import feature/clientupdate even though ts_omit_clientupdate isn't
set, so they shouldn't tell control they can be remotely updated.
Add the previously missing feature.Register call to
feature/clientupdate, document the binary-support requirement on
tailcfg.Hostinfo.AllowsUpdate, and make tsnet's dep test verify it
doesn't depend on feature/clientupdate.
Updates #12614
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: I526ef11f2a4141f5fce161b1f77263324014b5c4
The netmap.NetworkMap type is deprecated and going away, and
reconfigAppConnectorLocked only needed its SelfNode field anyway.
Take a tailcfg.NodeView instead and check its validity in place of
the old nil netmap check.
Updates #12542
Change-Id: Id617845b67416404500cca438ce4ac0372cd8a8e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
wgcfg.Config.NetworkLogging carried the network flow logging identity
inside the WireGuard config, where it was unrelated to WireGuard; it
lived there mainly so that identity changes would defeat Reconfig's
ErrNoChanges check and reach the netlog startup/shutdown logic.
Remove the field and move the whole netlog lifecycle into a new
feature/netlog package, installed on the engine via the new
wgengine.HookNewNetLogger hook, like other feature/* packages. The
logging identity now comes from LocalBackend's current netmap via the
widened NetLogSource interface (replacing Engine.SetNetLogNodeSource),
so nmcfg no longer parses audit log IDs into the config. The engine
still calls the hook before its ErrNoChanges return and before
router.Set (to capture initial packets), and again after router.Set
(to capture final packets), preserving the previous ordering.
Core wgengine no longer imports wgengine/netlog, so minimal builds
drop it entirely. tailscaled keeps netlog via feature/condregister,
and tsnet imports feature/condregister/netlog explicitly to keep
netlog enabled by default in tsnet-based binaries (tsidp,
k8s-operator).
This is pulled out of a future change that removes wgcfg.Config.Peers,
to make that PR smaller.
Updates #12542
Updates #12614
Change-Id: I41ca7dfe43c51e977c41b5f8e934bd1f0e6e6e24
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
* ipn/localapi,ipnlocal,feature/acme,client/local: honour Retry-After on cert rate-limit
serveCert now responds with 429 + Retry-After when the underlying ACME
error is a rate limit, instead of a generic 500. client/local surfaces
this as a typed RateLimitedError with the parsed hint so callers can
back off intelligently.
Updates tailscale/corp#42164
Signed-off-by: chaosinthecrd <tom@tmlabs.co.uk>
* tsweb,feature/acme,ipn/localapi,ipnlocal: generalise cert error → HTTP mapping via tsweb.HTTPStatuser
Introduces a tsweb.HTTPStatuser interface, any error can implement
to describe its intended HTTP response (code, message, headers).
Moves CertRateLimitedError from ipnlocal to feature/acme where it's
constructed, and it now uses HTTPStatuser to return 429 + Retry-After.
serveCert now checks for tsweb.HTTPStatuser rather than the specific
error type, so it no longer needs to know about the ACME rate-limit
type.
Signed-off-by: chaosinthecrd <tom@tmlabs.co.uk>
---------
Signed-off-by: chaosinthecrd <tom@tmlabs.co.uk>
Add a new Prefs.RemoteConfig bool. When true, a c2n endpoint at
/remoteapi/localapi/* proxies into this node's LocalAPI at
/localapi/* with full read/write permission, giving the tailnet
admin the same API surface a local root/admin user has via the
tailscale CLI. All LocalAPI versions (v0, v1, ...) proxy through.
RemoteConfig is an alternative to Tailscale's default per-feature
double opt-in, in which both the tailnet admin and the local machine
owner must consent to each individual setting change. It is a single
client-side "I trust the tailnet admin" switch that, once on, hands
over full remote management of this node's settings and LocalAPI
without any further local prompt or confirmation.
This is only appropriate when the tailnet admin already owns the
machine (e.g. a corporate fleet device) or the local user has
explicitly delegated full control. It should never be enabled on a
personal/BYOD device with an untrusted tailnet admin. The trust
model is documented on the pref, on the hidden --remote-config CLI
flag, and on the feature/remoteconfig package.
The node advertises its RemoteConfig state to the control plane via
a new Hostinfo.RemoteConfig bool. This is only true when the feature
is both compiled in (buildfeatures.HasRemoteConfig) and its init
actually ran (feature.IsRegistered("remoteconfig")); tsnet builds
have the former but not the latter and correctly report false.
The handler lives in feature/remoteconfig and can be omitted with the
ts_omit_remoteconfig build tag. tsnet's TestDeps guards against
accidentally pulling it in.
Updates tailscale/corp#18043
Change-Id: I72ce10a90a0e4e738c72c940af3af64c986160b2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Found with the regex `\b([A-Za-z]+) \1\b`.
Updates #cleanup
Change-Id: I4cc51784d9b6437d3d0c66b531828707f87f7fd5
Signed-off-by: Alex Chan <alexc@tailscale.com>
Add a new `--force-probe` flag to `tailscale exit-node suggest` that
waits for a routecheck.Refresh to finish before suggesting an exit
node.
This flag is currently hidden from the help text, but this flag is a
hint to the user that exit-node suggestions are based on routecheck
reachability reports.
Updates #17366
Updates tailscale/corp#33033
Signed-off-by: Simon Law <sfllaw@tailscale.com>
Now that the routecheck subsystem is continuously collecting
reachability reports in the background, we can add a hook to
LocalBackend for fetching its report. That allows
suggestExitNodeUsingTrafficSteering to consult that report when
disqualifying candidates, instead of blocking on an immediate probe.
Exit node suggestions will only consult the report when the
`client-side-reachability` and `client-side-reachability-routecheck`
node attributes are both set on the current node.
Updates #17366
Updates tailscale/corp#33033
Signed-off-by: Simon Law <sfllaw@tailscale.com>
This patch adds a new ipnext.NotifyWatcher interface that exposes
ipn.LocalBackend.WatchNotifications so that extensions inside
tailscaled can subscribe to the IPN bus, much like how the GUI
clients subscribe to it through the Local API.
This interface is used by the new feature/routecheck.RouterTracker to
watch for changes in the peer map that affect routers. RouterTracker
uses dead reckoning to incrementally maintain the set of routers. We
do this to avoid looping over the peer map repeatedly. See #17366.
RouterTracker supports two hooks:
- OnNetMapAvailable signals that the initial netmap has been received,
so that the routecheck.Client can wake up goroutines that are
waiting for it.
- OnRoutersChange signals that the set of routers has changed, so that
the routecheck.Client can decide to probe a subset of the routers
instead of all of them. Currently, this optimization hasn’t been
implemented yet.
Updates #17366
Updates #20062
Updates tailscale/corp#33033
Co-authored-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Signed-off-by: Simon Law <sfllaw@tailscale.com>
Add consistent definitions and tests so that watchers of the IPN bus
can keep track of routers when listening for NotifyInitialStatus and
NotifyPeerChanges.
Updates #17366
Updates tailscale/corp#33033
Signed-off-by: Simon Law <sfllaw@tailscale.com>
We borked this in 30a89ad378
and started including skipped extensions (e.g., conn25 when
TAILSCALE_USE_WIP_CODE != 1) in the list of active ones.
This doesn't have any impact other than on logging, though.
Updates #cleanup
Signed-off-by: Nick Khyl <nickk@tailscale.com>
This adds the NotifyInitialPolicy watch option and the Policy field in
Notify so that clients can receive the effective policy snapshot via IPN
bus.
This extends policyclient.Client so ipnlocal can get and watch policy
snapshots, which is used by sysPolicyChanged to notify watchers.
User-scoped policy store registration, management, and cleanup will be
added in a follow-up
Updates tailscale/corp#42259
Signed-off-by: kari <kari@tailscale.com>
This adds a Created field to LoginProfile to normalize the sort order
of login profiles presented in the various client GUIs. The default
sort order for existing profiles remains unchanged and continues to be
based on Name. Newly added profiles will be stamped at creation time
and returned at the top of the list of unstamped profiles, sorted by
creation date in descending order.
The rationale is to ensure that all clients present the user's profile
list in the same order, regardless of newly added accounts, name
changes, or nickname overrides.
The Mac client was recently updated to remove various custom profile
sorting behaviors (https://github.com/tailscale/corp/pull/43847).
iOS, Android, and Windows do not currently perform GUI-level sorting,
so this change should propagate to them seamlessly.
updates tailscale/corp#43843
Signed-off-by: Will Hannah <willh@tailscale.com>
Currently, PeerAPI DNS is only allowed if
1. The peer is owned by the same user as this device, or
2. The node is an exit node or app connector
a. and the peer has access to a hypothetical DNS server at 0.0.0.0:53
(which approximately means "the peer has access to
autogroup:internet")
None of this is useful for conn25. This adds the most basic of hooks
(and converts the existing logic to a hook, which should improve clarity
and lead to the possibility of moving the existing checks into feature
packages in future).
There is an extra filter based on the name being queried that is
performed later. It refuses names in
tailcfg.DNSConfig.ExitNodeFilteredSet. That filter is not modified by
this change.
With this change, if conn25 is configured as a connector, then all
PeerAPI DNS queries are permitted (still subject to the
ExitNodeFilteredSet as noted above).
More work is required: the goal before release (i.e. the WIPCode check
is removed) is that each query should be checked against the list of
domains in the requested conn25 app. For now, this only verifies that
conn25 is configured (and does not include the autogroup:internet
check, which is not how conn25 grants will operate when implemented,
soon).
This change has been manually tested against the scenario outlined in
tailscale/corp#40117; unfortunately the code's structure makes writing a
unit test difficult. The more comprehensive changes needed for
tailscale/corp#40076 should include an integration test that covers this
case.
The hook must go in the ipnlocal package rather than the usual extension
host to prevent a circular dependency on the ipnlocal.PeerAPIHandler
interface. Registering PeerAPI handlers uses a similar strategy, likely
because of, at least in part, this same problem.
Updates tailscale/corp#40076Fixestailscale/corp#40117
Change-Id: I367714170b509d7a421f62672e5824b3590c2b9c
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
f5eac39ea ("feature/acme, ipn/ipnlocal: start moving ACME/cert state
into an extension") started to move the cert code into feature/acme
but was meant as a baby step.
This goes further, moving almost everything, leaving only some hooks
in ipnlocal.
When we later move "serve" support out to feature/serve, this will
look a bit different in that the hooks currently in ipnlocal will move
to feature/serve (cert support already depends on serve).
As part of this, cert-related tests move to feaure/acme too, which
means some test infra from ipnlocal now moves to shared ipnlocaltest.
(it's not big at the moment, but I imagine it growing)
Updates #12614
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: I9ea89aa9754f12d54b81751b6bd830f2664241ff
Move all the FooForTest methods on LocalBackend to instead be
methods on a new unexported forTest type which is then given out
to callers in other packages via an exported ForTest method
(panicking in non-test contexts) that returns that unexported type.
This is unusual style (exported returning unexported) but declutters
godoc and makes call sites both more explicit and easier to read
without the "ForTest" suffix polluting the symbols. Now FooForTest()
changes into ForTest().Foo().
This was motivated by a pending change moving a bunch of code out of
LocalBackend into other packages that required adding more ForTest
methods to LocalBackend to keep the tests (now in other packages)
working. Instead, do this refactor now so the future change is prettier.
Updates #12614
Updates #cleanup
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: Ib25e6d76d48dc8622ac3a955e0b1220d582e63a8
WhoIs lookups for an IPv6-mapped IPv4 address such as
"::ffff:100.87.98.86" failed to match the node's canonical IPv4
address. Unmap the address before looking it up so these resolve.
Fixes#20235
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Signed-off-by: Bouke van der Bijl <i@bou.ke>
The ACME serialization mutex (acmeMu) was a package-level global, and
several ACME-related fields lived on LocalBackend even though the
cert code is conditional and not linked into every binary. With
multiple tsnet.Servers in one process (each its own LocalBackend),
a process-wide acmeMu also serialized unrelated backends.
Introduce a new feature/acme extension that owns the per-LocalBackend
ACME/cert state in an ipnlocal.CertState value:
- acmeMu, renewMu, renewCertAt (previously package globals)
- pendingACMETLSALPNCerts, pendingCertDomains{,Mu},
getCertForTest, certRefreshCancel (previously LocalBackend
fields, only meaningful when ACME was compiled in)
ipnlocal/cert.go now reaches the state through b.certState(), which
is routed by a feature.Hook installed at init by feature/acme. The
CertState type lives in ipnlocal so cert.go can access its fields
directly without a method explosion; the extension in feature/acme
constructs and owns it.
This is a baby step. The end goal is for the entire cert/ACME code
to live in feature/acme, with ipnlocal only retaining whatever thin
hooks the rest of LocalBackend needs to call into it. The current
split (CertState and most of cert.go in ipnlocal, extension wrapper
in feature/acme) is a deliberately temporary middle ground that
keeps this PR small while making the next moves mechanical.
The package is named feature/acme to match the existing HasACME /
ts_omit_acme naming. condregister/maybe_acme.go wires it in for
non-js builds.
Updates #12614
Updates #20248
Updates #20249
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: I520909f24ad11a9622ef33c2290fe36ad44d6f71
We stopped reading this field nearly two years ago, with a TODO comment
to remove it sometime in 2025.
It is now 2026.
Updates #12058
Change-Id: I8ddf1c2e4c3c428e8d45a6491d3899368ec52c30
Signed-off-by: Alex Chan <alexc@tailscale.com>
updates tailscale/corp#44019
WebClient is very useful for remote management
on tvOS (which cannot do ssh). Let's include it there.
Minimal corresponding tailscale/corp changes to follow
to add UI to set the required prefs.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
* Revert "control/controlclient: continue map poll during key expiry to receive extensions"
This reverts commit 6a822dcc36. This commit
has caused test failures in the corp repo by unexpected changing the login
behaviour when nodes have a valid node key.
Updates tailscale/corp#43705
Updates #19326
Signed-off-by: Alex Chan <alexc@tailscale.com>
* Revert "tsnet: test key extension after server restart"
This reverts commit 317201375f. This test
relies on changes in 317201375f, which is
also being reverted because it causes test failures in corp.
Updates tailscale/corp#43705
Updates #19326
Signed-off-by: Alex Chan <alexc@tailscale.com>
---------
Signed-off-by: Alex Chan <alexc@tailscale.com>
setWebClientAtomicBoolLocked and setDebugLogsByCapabilityLocked
each only need the node capabilities to decide what to do, so
take a set.Set[tailcfg.NodeCapability] directly as part of
getting rid of netmap.NetworkMap.
Updates #12542
Change-Id: If7c30b6354fd42dfe82ed6d2e2fe3439de401315
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The engine only used the netmap to look up self addresses and the
self node's primary routes, so pass it the self node directly
rather than the whole netmap.
Updates #12542
Change-Id: I13c0028eed65d2177baf4cf6c449f5e441845a18
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
tsdial.Dialer.SetNetMap rebuilt an O(n peers) map of MagicDNS names on
every netmap change. As we move toward per-peer incremental deltas,
this becomes quadratic. This removes it and replaces it with
SetResolveMagicDNS, a callback into LocalBackend that looks up
hostnames from nodeBackend's new nodeByName index (populated alongside
nodeByAddr/nodeByKey on both full and delta paths). The index stores
both FQDNs and short names as keys.
This is the same treatment applied to netlog (8f210454d), wglog
(988b0905b), and drive (1d6989408): stop pushing *netmap.NetworkMap
into subsystems and instead have them pull from LocalBackend's live
data via callbacks.
Updates #12542
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: I24557ab0c8a27636e08e4779bcfd3ec633db0a78
The logging added in 12188c0 was generating excessive spam in
backend logs. This may have been exacerbated by
tailscale GUI<->backend architecture on certain platforms like
Windows, where the GUI polls for exit node suggestions rather
than listening on the IPN bus.
Change this to log on error or if the current suggestion differs
from the previous suggestion.
Updates tailscale/corp#43691
Updates #20194
Signed-off-by: Amal Bansode <amal@tailscale.com>
userspaceEngine.PeerForIP read from e.netMap.Peers and
e.lastCfgFull.Peers, both of which go stale when peers arrive via
netmap deltas (which skip Engine.SetNetworkMap and Engine.Reconfig).
Every PeerForIP caller (Engine.Ping, the TSMP disco-key handler,
pendopen diagnostics, tsdial.Dialer.UseNetstackForIP, and
LocalBackend.GetPeerEndpointChanges) would report "no matching peer"
for freshly-added peers.
Fix it the same way SetPeerByIPPacketFunc fixed the outbound packet
hot path: have LocalBackend install a callback that reads the live
nodeBackend. nb.NodeByAddr is built from both SelfNode and Peers
(updateNodeByAddrLocked), so a single lookup covers the common case
with IsSelf set when the matched node ID is SelfNode's. The subnet-
route / exit-node-default-route slow path goes through a new
Engine.PeerKeyForIP that exposes the engine's AllowedIPs BART table
(the same table the outbound packet hot path already consults, with
exit-node selection honored), and resolves the matched key back to a
NodeView via the live nodeBackend.
Updates #12542
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: I0d4b0d8997c8e796b7367c46b49b61d4fdc717b0
The watchdog (ipn/ipnlocal/watchdog.go) was abusing PeerForIP with an
invalid netip.Addr as a way to acquire and release the engine's
internal locks for deadlock detection. This does the TODO to break it out
into its own method like all the other similarly named methods.
Splitting this out as a prerequisite for a follow-up rewrite of
PeerForIP itself; not having to preserve the lock-probe overload in
the new implementation keeps that follow-up smaller.
Updates #12542
Updates #cleanup
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: I25cbffd11aeb65600d9128845404c4918ef88ead
This applies the same treatment from PR #20162 (netlog) and
PR #20171 (wglog) to the local Taildrive filesystem wiring, ending the
per-netmap-update O(n) rebuild of the drive remotes list.
This moves the O(n peers) taildrive-remote list rebuild from every
peer change (which previously happened regardless of whether you were
even using taildrive) to instead happen only as needed.
That running on every netmap update and was a contributor to the
broader quadratic behavior we want to eliminate when a single peer is
added or removed.
Instead, this introduces drive.RemoteSource, a small interface the
Taildrive filesystem pulls from lazily on incoming WebDAV requests,
and caches by a generation counter. ipn/ipnlocal installs a
driveRemoteSource once at NewLocalBackend time and bumps
LocalBackend.driveGen on the three events that can actually flip the
drive-capable peer set: full netmap installs (domain + self caps),
UpdateNetmapDelta (peer add/remove or per-peer address changes), and
updatePacketFilter (since PeerCapability values are derived from the
packet filter rules, not from peer.CapMap).
The hook itself is kept but narrowed: it no longer takes a
*netmap.NetworkMap and its only remaining job is to re-notify IPN bus
listeners of the current local shares list on full installs.
This is a dependency to removing the netmap.NetworkMap type from
upstream callers, like wgengine.Engine in general.
(Also add a bunch more tests)
Updates #12542
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: I7e3d2f5b4a9c8e1d6f0a3b7c9e2d4f8a1b6c5e9d
This applies the same treatment from 8f210454dd (netlog) to wglog,
ending use of netmap.NetworkMap and instead getting the canonical data
from LocalBackend/nodeBackend.
This is a dependency to removing the netmap.NetworkMap from
upstream callers, like wgengine.Engine in general.
Updates #12542
Change-Id: Icb5af0799322def048a6f594b49f7d11273f025d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
aa5da2e5f2 (in the 1.99.x dev series, unstable) introduced some bugs,
only some of which were later fixed. This fixed another. As of that
change, tkaFilterNetmapLocked ran only on full netmaps through
LocalBackend.setClientStatusLocked and not peer upserts via new or
changed peers. The later ae743642d9 fixed a regression in the
Engine layer but didn't fix the tkaFilter code from re-running on
upserts.
This add a tkaFilterDeltaMutsLocked pass before
nodeBackend.UpdateNetmapDelta. For each NodeMutationUpsert whose
peer fails the same signature check tkaFilterNetmapLocked applies,
rewrite the upsert in place into a NodeMutationRemove targeting the
same node ID, so magicsock's per-mutation dispatch and
nodeBackend.peers both drop the peer, matching the prior full-netmap
semantics.
New tsnet tests added:
- TestTailnetLockFiltersUnsignedDeltaPeer covers the new-peer
case.
- TestTailnetLockFiltersUnsignedDeltaPeerReplacement covers the
existing-peer-replacement case, to an empty signature.
- TestTailnetLockFiltersDeltaPeerWithInvalidSignature like above
but with a bogus signature.
Updates #12542
Updates tailscale/corp#43767
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: Ib35d0391541fee654867c26489847dbc5b7e2ae8
When recommending an exit node, suggestExitNodeLocked ranks candidates by
the latency to their home DERP region, taken from the most recent netcheck
report. But netcheck alternates between full reports, which probe every
region, and incremental reports, which only re-probe the home region and a
handful of the fastest regions. When the most recent report is incremental,
the suggestion fell back to a random for exit nodes that are far away.
Now we rank candidates against the best recent latency, tracked by the
`netcheck.Client` - the same data that is used to pick the preferred
DERP. It uses a history of measurements which includes a full netcheck
report, so should cover all DERP regions.
Updates tailscale/corp#17516
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
This patch adds support for the fmt.Stringer interface to the
ipn.NotifyWatchOpt enum. This is useful when debugging these bitmasks.
For example:
fmt.Printf("%s", ipn.NotifyPeerChanges | ipn.NotifyNoNetMap)
// Output: (ipn.NotifyPeerChanges | ipn.NotifyNoNetMap)
Fixes#20066
Signed-off-by: Simon Law <sfllaw@tailscale.com>
The Logger previously took a *netmap.NetworkMap at Startup and on every
ReconfigNetworkMap call, denormalizing it into per-IP and self lookup
maps. That denormalization is O(n) over all peers and ran on every
netmap update, contributing to the broader quadratic behavior we want
to eliminate when a single peer is added or removed.
Instead, this makes netlog ask LocalBackend (well, nodeBackend) for
the info it needs, letting us remove the netmap.NetworkMap type
entirely from the netlog package.
This is a dependency to removing the netmap.NetworkMap type from
upstream callers, like wgengine.Engine in general.
Updates #12542
Change-Id: Ib5f2de96e788a667332c0a6f7ac833b3d0053b5c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
util/def: add def.Bool and def.Duration default parse helpers
Replace multiple instances of def.Bool and def.Duration with a new util/def
package.
Updates #20018
Co-authored-by: Bobby <boby@codelabs.co.id>
Co-authored-by: Simon Law <sfllaw@tailscale.com>
Signed-off-by: Bobby <boby@codelabs.co.id>
Signed-off-by: Simon Law <sfllaw@tailscale.com>
ipnlocal.LocalBackend.populatePeerStatusLocked assumed that Hostinfo
was always valid, but that’s not always true, especially in tests.
ipnlocal.peerAPIPorts suffered from a similar assumption.
This patch checks for NodeView.Valid and Hostinfo.Valid; assuming the
zero value as a safe default.
Updates #8948
Updates #12542
Signed-off-by: Simon Law <sfllaw@tailscale.com>
The earlier aa5da2e5f2 made peer adds and removes through a netmap
delta path that mutates only nodeBackend, on the assumption that
PeerForIP, lookupPeerByIP, the engine's wireguard config
(e.lastCfgFull), the engine BART, wgdev's PeerLookupFunc closure, and
the engine's cached netmap (e.netMap) would all stay correct without
further updates. They don't. I'd totally forgotten that
Engine.PeerForIP has its own alternate IP-to-peer lookup codepath.
Concretely, all of these failed for a peer that arrived via
[tailcfg.MapResponse.PeersChanged] (and never via a full
[tailcfg.MapResponse.Peers] list):
- [wgengine.Engine.PeerForIP] read from e.netMap and e.lastCfgFull
(neither updated on the delta path) and so missed the new
peer. The rando non-data-plane callers (Ping, TSMP, pendopen,
debug endpoints, tsdial.Dialer.UseNetstackForIP for tsnet and
onlyNetstack tailscaled) all returned "no matching peer".
- The engine BART (built from e.lastCfgFull) missed the new peer's
subnet routes / exit-node default routes.
- wgdev's [device.PeerLookupFunc] closure (rebuilt only inside
wgcfg.ReconfigDevice) didn't have the new peer's noise key, so
outbound encryption to the new peer dropped the packet even when
SetPeerByIPPacketFunc returned the right NodePublic.
- And nothing in the delta path triggered NodeMutationRemove to
flow through to authReconfig either, so the same stale state
pointed at removed peers indefinitely.
So just (functionally) revert it for now, to have something easily
cherry-pickable to the 1.100 release branch. Proper fixes can come later
for the next release.
This also adds three new tests:
- TestPingPeerLearnedViaDelta runs disco and TSMP subtests over a
delta-added peer with only self addresses. disco exercises the
cold PeerForIP path (magicsock); TSMP exercises the full data path
through wgdev encryption. Both fail without this fix.
- TestPingSubnetRouteOfDeltaPeer exercises a subnet-router peer
arriving via delta. With s1 in --accept-routes mode, an IP
inside the advertised CIDR must resolve to s2 and a TSMP ping
must round-trip. Hits the BART + lastCfgFull + wgdev staleness
in one go.
- TestPingSelfReturnsIsLocalIP is a regression guard for the
IsSelf early-out in Engine.Ping. Passes on main today; included
here so future refactors of PeerForIP can't regress self
handling without test breakage.
Updates tailscale/corp#43394
Change-Id: I7a049271359bd73e7147ae9e2554e85614c2b8d2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Added in #20111, but it is too noisy under real load to be useful.
Updates #12542
Change-Id: Ib99a8966ade0bfa4281fccc057249819cdcdfe83
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
tailscale serve set-config now also accepts the legacy raw ipn.ServeConfig
format (as emitted by `tailscale serve status --json` and consumed via
TS_SERVE_CONFIG, which has no "version" field), so the common
serve-status-edit-set workflow stops failing. Only the services-oriented
content is applied; any node-level fields are skipped with a warning to
stderr pointing users at get-config to migrate.
Fixestailscale/corp#39793
Signed-off-by: Brendan Creane <bcreane@gmail.com>
Add an UpdatePeers method to the cache. This allows us to support netmap peer deltas,
by allowing just the peers to be updated in an existing cache. As a safety check, reject
an update if there was no base netmap data to apply a change to.
Then, when processing peer mutations in the backend, capture any changes that should
be applied to the cache and update it, if one is enabled.
Updates #12542
Change-Id: I2f8790a8fdc5e85fce6700ba4821a8cb10dddffa
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
Adds tailscaled_serve_{inbound,outbound}_bytes_total, labeled by Tailscale
Service name, by wrapping the peer-facing conn in tcpHandlerForVIPService.
Per-service counters persist for the process lifetime rather than being
evicted on serve-config changes.
Fixes#19572
Signed-off-by: Raj Singh <raj@tailscale.com>
Co-authored-by: Ethan Smith <ethan.smith@grafana.com>
When a client's node key expires and the user clicks "Login" (or runs
`tailscale up`), the Login() method was cancelling the map poll context.
This caused key extension notifications from the server to be lost,
leaving clients stuck in NeedsLogin state even after an admin extended
their key.
The fix has three parts:
1. Login(): Don't cancel mapCtx if we have valid credentials (loggedIn=true)
or a valid node key. This allows the map poll to continue receiving
server notifications while the auth flow proceeds in parallel.
2. mapRoutine(): Poll when we have a node key, even if !loggedIn. This
handles the tsnet restart scenario where control returns an AuthURL
(so loggedIn=false) but we still have a valid node key that can
receive map updates.
3. sendStatus()/UpdateFullNetmap(): Forward netmaps when we have a node
key, not just when loggedIn. This ensures the backend sees key expiry
changes even when the auth flow hasn't completed.
"First successful flow wins": if a key extension arrives via map poll,
the client recovers automatically. If the auth flow completes first,
that works too. Either way, the client is no longer stuck.
This aligns with the SeamlessKeyRenewal philosophy: maintain connectivity
paths while authentication proceeds, allowing server-initiated recovery.
Fixes#19326
Change-Id: I26dbbc1fa7c1159ba075362e44d02814355d6b44
Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Add NotifyInProcessNoDisconnect for in-process IPN bus subscribers that
must apply every bus update. When such a subscriber falls behind, block
Notify production instead of sending the terminal fell-behind message and
closing the watch.
This is intentionally not available over LocalAPI, where a slow or stuck
out-of-process client should still be disconnected rather than allowed to
stall tailscaled. In-process callers that use the bit must keep their
callbacks fast and must not call back into LocalBackend from the callback.
Updates #20062
Change-Id: I730ad61a07475243bb226fba2262c1a3ded211ae
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
New-style IPN bus subscribers consume stateful delta streams. Reject
NotifyRateLimit when it is combined with those subscription bits so
tailscaled cannot merge or delay messages that clients need to apply in
order.
Also stop silently dropping notifications when a watcher falls behind.
Remove the watcher, replace its stale queue with one terminal ErrMessage
notification, and close the watch.
Updates #20062
Change-Id: Id9d402ea76f4011cd23f122adf62f30dd4b6f90b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
