Preparing for release of 3.0.1

source files so that they use the unchanging src or src-preview
subdirectory location for the file.

.cvsignore

@@ -1,21 +0,0 @@
-.ignore
-.cvsignore
-Makefile
-a
-b
-config.cache
-config.h
-config.log
-config.status
-dist.tar.gz
-rsync
-rsync-*
-rsync.aux
-rsync.dvi
-rsync.log
-tech_report.aux
-tech_report.dvi
-tech_report.log
-tech_report.ps
-test
-

.gitignore

@@ -0,0 +1,37 @@
+*.[oa]
+*~
+dummy
+ID
+Makefile
+configure.sh
+config.cache
+config.h
+config.h.in
+config.log
+config.status
+/proto.h
+/proto.h-tstamp
+/rsync.1
+/rsyncd.conf.5
+/autom4te*.cache
+/confdefs.h
+/conftest*
+/dox
+/getgroups
+/gmon.out
+/rsync
+/shconfig
+/testdir
+/tests-dont-exist
+/testtmp
+/tls
+/trimslash
+/t_unsafe
+/wildtest
+/getfsdev
+/rounding.h
+/doc/rsync.pdf
+/doc/rsync.ps
+/testsuite/chown-fake.test
+/testsuite/devices-fake.test
+/patches

.ignore

@@ -1,19 +0,0 @@
-.#*
-*.log
-Makefile
-config.h
-*.o
-CVS
-.ignore
-.cvsignore
-*~
-rsync
-config.status
-config.cache
-TAGS
-config.log
-test
-*.gz
-rsync-*
-*.dvi
-*.aux

COPYING

@@ -1,285 +1,626 @@
-		    GNU GENERAL PUBLIC LICENSE
-		       Version 2, June 1991
+                    GNU GENERAL PUBLIC LICENSE
+                       Version 3, 29 June 2007
 
- Copyright (C) 1989, 1991 Free Software Foundation, Inc.
-                          675 Mass Ave, Cambridge, MA 02139, USA
+ Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
  Everyone is permitted to copy and distribute verbatim copies
  of this license document, but changing it is not allowed.
 
-			    Preamble
+                            Preamble
 
-  The licenses for most software are designed to take away your
-freedom to share and change it.  By contrast, the GNU General Public
-License is intended to guarantee your freedom to share and change free
-software--to make sure the software is free for all its users.  This
-General Public License applies to most of the Free Software
-Foundation's software and to any other program whose authors commit to
-using it.  (Some other Free Software Foundation software is covered by
-the GNU Library General Public License instead.)  You can apply it to
+  The GNU General Public License is a free, copyleft license for
+software and other kinds of works.
+
+  The licenses for most software and other practical works are designed
+to take away your freedom to share and change the works.  By contrast,
+the GNU General Public License is intended to guarantee your freedom to
+share and change all versions of a program--to make sure it remains free
+software for all its users.  We, the Free Software Foundation, use the
+GNU General Public License for most of our software; it applies also to
+any other work released this way by its authors.  You can apply it to
 your programs, too.
 
   When we speak of free software, we are referring to freedom, not
 price.  Our General Public Licenses are designed to make sure that you
 have the freedom to distribute copies of free software (and charge for
-this service if you wish), that you receive source code or can get it
-if you want it, that you can change the software or use pieces of it
-in new free programs; and that you know you can do these things.
+them if you wish), that you receive source code or can get it if you
+want it, that you can change the software or use pieces of it in new
+free programs, and that you know you can do these things.
 
-  To protect your rights, we need to make restrictions that forbid
-anyone to deny you these rights or to ask you to surrender the rights.
-These restrictions translate to certain responsibilities for you if you
-distribute copies of the software, or if you modify it.
+  To protect your rights, we need to prevent others from denying you
+these rights or asking you to surrender the rights.  Therefore, you have
+certain responsibilities if you distribute copies of the software, or if
+you modify it: responsibilities to respect the freedom of others.
 
   For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must give the recipients all the rights that
-you have.  You must make sure that they, too, receive or can get the
-source code.  And you must show them these terms so they know their
-rights.
+gratis or for a fee, you must pass on to the recipients the same
+freedoms that you received.  You must make sure that they, too, receive
+or can get the source code.  And you must show them these terms so they
+know their rights.
 
-  We protect your rights with two steps: (1) copyright the software, and
-(2) offer you this license which gives you legal permission to copy,
-distribute and/or modify the software.
+  Developers that use the GNU GPL protect your rights with two steps:
+(1) assert copyright on the software, and (2) offer you this License
+giving you legal permission to copy, distribute and/or modify it.
 
-  Also, for each author's protection and ours, we want to make certain
-that everyone understands that there is no warranty for this free
-software.  If the software is modified by someone else and passed on, we
-want its recipients to know that what they have is not the original, so
-that any problems introduced by others will not reflect on the original
-authors' reputations.
+  For the developers' and authors' protection, the GPL clearly explains
+that there is no warranty for this free software.  For both users' and
+authors' sake, the GPL requires that modified versions be marked as
+changed, so that their problems will not be attributed erroneously to
+authors of previous versions.
 
-  Finally, any free program is threatened constantly by software
-patents.  We wish to avoid the danger that redistributors of a free
-program will individually obtain patent licenses, in effect making the
-program proprietary.  To prevent this, we have made it clear that any
-patent must be licensed for everyone's free use or not licensed at all.
+  Some devices are designed to deny users access to install or run
+modified versions of the software inside them, although the manufacturer
+can do so.  This is fundamentally incompatible with the aim of
+protecting users' freedom to change the software.  The systematic
+pattern of such abuse occurs in the area of products for individuals to
+use, which is precisely where it is most unacceptable.  Therefore, we
+have designed this version of the GPL to prohibit the practice for those
+products.  If such problems arise substantially in other domains, we
+stand ready to extend this provision to those domains in future versions
+of the GPL, as needed to protect the freedom of users.
+
+  Finally, every program is threatened constantly by software patents.
+States should not allow patents to restrict development and use of
+software on general-purpose computers, but in those that do, we wish to
+avoid the special danger that patents applied to a free program could
+make it effectively proprietary.  To prevent this, the GPL assures that
+patents cannot be used to render the program non-free.
 
   The precise terms and conditions for copying, distribution and
 modification follow.
-
-		    GNU GENERAL PUBLIC LICENSE
-   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
 
-  0. This License applies to any program or other work which contains
-a notice placed by the copyright holder saying it may be distributed
-under the terms of this General Public License.  The "Program", below,
-refers to any such program or work, and a "work based on the Program"
-means either the Program or any derivative work under copyright law:
-that is to say, a work containing the Program or a portion of it,
-either verbatim or with modifications and/or translated into another
-language.  (Hereinafter, translation is included without limitation in
-the term "modification".)  Each licensee is addressed as "you".
+                       TERMS AND CONDITIONS
 
-Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope.  The act of
-running the Program is not restricted, and the output from the Program
-is covered only if its contents constitute a work based on the
-Program (independent of having been made by running the Program).
-Whether that is true depends on what the Program does.
+  0. Definitions.
 
-  1. You may copy and distribute verbatim copies of the Program's
-source code as you receive it, in any medium, provided that you
-conspicuously and appropriately publish on each copy an appropriate
-copyright notice and disclaimer of warranty; keep intact all the
-notices that refer to this License and to the absence of any warranty;
-and give any other recipients of the Program a copy of this License
-along with the Program.
+  "This License" refers to version 3 of the GNU General Public License.
 
-You may charge a fee for the physical act of transferring a copy, and
-you may at your option offer warranty protection in exchange for a fee.
+  "Copyright" also means copyright-like laws that apply to other kinds of
+works, such as semiconductor masks.
 
-  2. You may modify your copy or copies of the Program or any portion
-of it, thus forming a work based on the Program, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
+  "The Program" refers to any copyrightable work licensed under this
+License.  Each licensee is addressed as "you".  "Licensees" and
+"recipients" may be individuals or organizations.
 
-    a) You must cause the modified files to carry prominent notices
-    stating that you changed the files and the date of any change.
+  To "modify" a work means to copy from or adapt all or part of the work
+in a fashion requiring copyright permission, other than the making of an
+exact copy.  The resulting work is called a "modified version" of the
+earlier work or a work "based on" the earlier work.
 
-    b) You must cause any work that you distribute or publish, that in
-    whole or in part contains or is derived from the Program or any
-    part thereof, to be licensed as a whole at no charge to all third
-    parties under the terms of this License.
+  A "covered work" means either the unmodified Program or a work based
+on the Program.
 
-    c) If the modified program normally reads commands interactively
-    when run, you must cause it, when started running for such
-    interactive use in the most ordinary way, to print or display an
-    announcement including an appropriate copyright notice and a
-    notice that there is no warranty (or else, saying that you provide
-    a warranty) and that users may redistribute the program under
-    these conditions, and telling the user how to view a copy of this
-    License.  (Exception: if the Program itself is interactive but
-    does not normally print such an announcement, your work based on
-    the Program is not required to print an announcement.)
-
-These requirements apply to the modified work as a whole.  If
-identifiable sections of that work are not derived from the Program,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works.  But when you
-distribute the same sections as part of a whole which is a work based
-on the Program, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote it.
+  To "propagate" a work means to do anything with it that, without
+permission, would make you directly or secondarily liable for
+infringement under applicable copyright law, except executing it on a
+computer or modifying a private copy.  Propagation includes copying,
+distribution (with or without modification), making available to the
+public, and in some countries other activities as well.
 
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Program.
+  To "convey" a work means any kind of propagation that enables other
+parties to make or receive copies.  Mere interaction with a user through
+a computer network, with no transfer of a copy, is not conveying.
 
-In addition, mere aggregation of another work not based on the Program
-with the Program (or with a work based on the Program) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
+  An interactive user interface displays "Appropriate Legal Notices"
+to the extent that it includes a convenient and prominently visible
+feature that (1) displays an appropriate copyright notice, and (2)
+tells the user that there is no warranty for the work (except to the
+extent that warranties are provided), that licensees may convey the
+work under this License, and how to view a copy of this License.  If
+the interface presents a list of user commands or options, such as a
+menu, a prominent item in the list meets this criterion.
 
-  3. You may copy and distribute the Program (or a work based on it,
-under Section 2) in object code or executable form under the terms of
-Sections 1 and 2 above provided that you also do one of the following:
+  1. Source Code.
 
-    a) Accompany it with the complete corresponding machine-readable
-    source code, which must be distributed under the terms of Sections
-    1 and 2 above on a medium customarily used for software interchange; or,
+  The "source code" for a work means the preferred form of the work
+for making modifications to it.  "Object code" means any non-source
+form of a work.
 
-    b) Accompany it with a written offer, valid for at least three
-    years, to give any third party, for a charge no more than your
-    cost of physically performing source distribution, a complete
-    machine-readable copy of the corresponding source code, to be
-    distributed under the terms of Sections 1 and 2 above on a medium
-    customarily used for software interchange; or,
+  A "Standard Interface" means an interface that either is an official
+standard defined by a recognized standards body, or, in the case of
+interfaces specified for a particular programming language, one that
+is widely used among developers working in that language.
 
-    c) Accompany it with the information you received as to the offer
-    to distribute corresponding source code.  (This alternative is
-    allowed only for noncommercial distribution and only if you
-    received the program in object code or executable form with such
-    an offer, in accord with Subsection b above.)
+  The "System Libraries" of an executable work include anything, other
+than the work as a whole, that (a) is included in the normal form of
+packaging a Major Component, but which is not part of that Major
+Component, and (b) serves only to enable use of the work with that
+Major Component, or to implement a Standard Interface for which an
+implementation is available to the public in source code form.  A
+"Major Component", in this context, means a major essential component
+(kernel, window system, and so on) of the specific operating system
+(if any) on which the executable work runs, or a compiler used to
+produce the work, or an object code interpreter used to run it.
 
-The source code for a work means the preferred form of the work for
-making modifications to it.  For an executable work, complete source
-code means all the source code for all modules it contains, plus any
-associated interface definition files, plus the scripts used to
-control compilation and installation of the executable.  However, as a
-special exception, the source code distributed need not include
-anything that is normally distributed (in either source or binary
-form) with the major components (compiler, kernel, and so on) of the
-operating system on which the executable runs, unless that component
-itself accompanies the executable.
+  The "Corresponding Source" for a work in object code form means all
+the source code needed to generate, install, and (for an executable
+work) run the object code and to modify the work, including scripts to
+control those activities.  However, it does not include the work's
+System Libraries, or general-purpose tools or generally available free
+programs which are used unmodified in performing those activities but
+which are not part of the work.  For example, Corresponding Source
+includes interface definition files associated with source files for
+the work, and the source code for shared libraries and dynamically
+linked subprograms that the work is specifically designed to require,
+such as by intimate data communication or control flow between those
+subprograms and other parts of the work.
 
-If distribution of executable or object code is made by offering
-access to copy from a designated place, then offering equivalent
-access to copy the source code from the same place counts as
-distribution of the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
-  4. You may not copy, modify, sublicense, or distribute the Program
-except as expressly provided under this License.  Any attempt
-otherwise to copy, modify, sublicense or distribute the Program is
-void, and will automatically terminate your rights under this License.
-However, parties who have received copies, or rights, from you under
-this License will not have their licenses terminated so long as such
-parties remain in full compliance.
+  The Corresponding Source need not include anything that users
+can regenerate automatically from other parts of the Corresponding
+Source.
 
-  5. You are not required to accept this License, since you have not
-signed it.  However, nothing else grants you permission to modify or
-distribute the Program or its derivative works.  These actions are
-prohibited by law if you do not accept this License.  Therefore, by
-modifying or distributing the Program (or any work based on the
-Program), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Program or works based on it.
+  The Corresponding Source for a work in source code form is that
+same work.
 
-  6. Each time you redistribute the Program (or any work based on the
-Program), the recipient automatically receives a license from the
-original licensor to copy, distribute or modify the Program subject to
-these terms and conditions.  You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties to
+  2. Basic Permissions.
+
+  All rights granted under this License are granted for the term of
+copyright on the Program, and are irrevocable provided the stated
+conditions are met.  This License explicitly affirms your unlimited
+permission to run the unmodified Program.  The output from running a
+covered work is covered by this License only if the output, given its
+content, constitutes a covered work.  This License acknowledges your
+rights of fair use or other equivalent, as provided by copyright law.
+
+  You may make, run and propagate covered works that you do not
+convey, without conditions so long as your license otherwise remains
+in force.  You may convey covered works to others for the sole purpose
+of having them make modifications exclusively for you, or provide you
+with facilities for running those works, provided that you comply with
+the terms of this License in conveying all material for which you do
+not control copyright.  Those thus making or running the covered works
+for you must do so exclusively on your behalf, under your direction
+and control, on terms that prohibit them from making any copies of
+your copyrighted material outside their relationship with you.
+
+  Conveying under any other circumstances is permitted solely under
+the conditions stated below.  Sublicensing is not allowed; section 10
+makes it unnecessary.
+
+  3. Protecting Users' Legal Rights From Anti-Circumvention Law.
+
+  No covered work shall be deemed part of an effective technological
+measure under any applicable law fulfilling obligations under article
+11 of the WIPO copyright treaty adopted on 20 December 1996, or
+similar laws prohibiting or restricting circumvention of such
+measures.
+
+  When you convey a covered work, you waive any legal power to forbid
+circumvention of technological measures to the extent such circumvention
+is effected by exercising rights under this License with respect to
+the covered work, and you disclaim any intention to limit operation or
+modification of the work as a means of enforcing, against the work's
+users, your or third parties' legal rights to forbid circumvention of
+technological measures.
+
+  4. Conveying Verbatim Copies.
+
+  You may convey verbatim copies of the Program's source code as you
+receive it, in any medium, provided that you conspicuously and
+appropriately publish on each copy an appropriate copyright notice;
+keep intact all notices stating that this License and any
+non-permissive terms added in accord with section 7 apply to the code;
+keep intact all notices of the absence of any warranty; and give all
+recipients a copy of this License along with the Program.
+
+  You may charge any price or no price for each copy that you convey,
+and you may offer support or warranty protection for a fee.
+
+  5. Conveying Modified Source Versions.
+
+  You may convey a work based on the Program, or the modifications to
+produce it from the Program, in the form of source code under the
+terms of section 4, provided that you also meet all of these conditions:
+
+    a) The work must carry prominent notices stating that you modified
+    it, and giving a relevant date.
+
+    b) The work must carry prominent notices stating that it is
+    released under this License and any conditions added under section
+    7.  This requirement modifies the requirement in section 4 to
+    "keep intact all notices".
+
+    c) You must license the entire work, as a whole, under this
+    License to anyone who comes into possession of a copy.  This
+    License will therefore apply, along with any applicable section 7
+    additional terms, to the whole of the work, and all its parts,
+    regardless of how they are packaged.  This License gives no
+    permission to license the work in any other way, but it does not
+    invalidate such permission if you have separately received it.
+
+    d) If the work has interactive user interfaces, each must display
+    Appropriate Legal Notices; however, if the Program has interactive
+    interfaces that do not display Appropriate Legal Notices, your
+    work need not make them do so.
+
+  A compilation of a covered work with other separate and independent
+works, which are not by their nature extensions of the covered work,
+and which are not combined with it such as to form a larger program,
+in or on a volume of a storage or distribution medium, is called an
+"aggregate" if the compilation and its resulting copyright are not
+used to limit the access or legal rights of the compilation's users
+beyond what the individual works permit.  Inclusion of a covered work
+in an aggregate does not cause this License to apply to the other
+parts of the aggregate.
+
+  6. Conveying Non-Source Forms.
+
+  You may convey a covered work in object code form under the terms
+of sections 4 and 5, provided that you also convey the
+machine-readable Corresponding Source under the terms of this License,
+in one of these ways:
+
+    a) Convey the object code in, or embodied in, a physical product
+    (including a physical distribution medium), accompanied by the
+    Corresponding Source fixed on a durable physical medium
+    customarily used for software interchange.
+
+    b) Convey the object code in, or embodied in, a physical product
+    (including a physical distribution medium), accompanied by a
+    written offer, valid for at least three years and valid for as
+    long as you offer spare parts or customer support for that product
+    model, to give anyone who possesses the object code either (1) a
+    copy of the Corresponding Source for all the software in the
+    product that is covered by this License, on a durable physical
+    medium customarily used for software interchange, for a price no
+    more than your reasonable cost of physically performing this
+    conveying of source, or (2) access to copy the
+    Corresponding Source from a network server at no charge.
+
+    c) Convey individual copies of the object code with a copy of the
+    written offer to provide the Corresponding Source.  This
+    alternative is allowed only occasionally and noncommercially, and
+    only if you received the object code with such an offer, in accord
+    with subsection 6b.
+
+    d) Convey the object code by offering access from a designated
+    place (gratis or for a charge), and offer equivalent access to the
+    Corresponding Source in the same way through the same place at no
+    further charge.  You need not require recipients to copy the
+    Corresponding Source along with the object code.  If the place to
+    copy the object code is a network server, the Corresponding Source
+    may be on a different server (operated by you or a third party)
+    that supports equivalent copying facilities, provided you maintain
+    clear directions next to the object code saying where to find the
+    Corresponding Source.  Regardless of what server hosts the
+    Corresponding Source, you remain obligated to ensure that it is
+    available for as long as needed to satisfy these requirements.
+
+    e) Convey the object code using peer-to-peer transmission, provided
+    you inform other peers where the object code and Corresponding
+    Source of the work are being offered to the general public at no
+    charge under subsection 6d.
+
+  A separable portion of the object code, whose source code is excluded
+from the Corresponding Source as a System Library, need not be
+included in conveying the object code work.
+
+  A "User Product" is either (1) a "consumer product", which means any
+tangible personal property which is normally used for personal, family,
+or household purposes, or (2) anything designed or sold for incorporation
+into a dwelling.  In determining whether a product is a consumer product,
+doubtful cases shall be resolved in favor of coverage.  For a particular
+product received by a particular user, "normally used" refers to a
+typical or common use of that class of product, regardless of the status
+of the particular user or of the way in which the particular user
+actually uses, or expects or is expected to use, the product.  A product
+is a consumer product regardless of whether the product has substantial
+commercial, industrial or non-consumer uses, unless such uses represent
+the only significant mode of use of the product.
+
+  "Installation Information" for a User Product means any methods,
+procedures, authorization keys, or other information required to install
+and execute modified versions of a covered work in that User Product from
+a modified version of its Corresponding Source.  The information must
+suffice to ensure that the continued functioning of the modified object
+code is in no case prevented or interfered with solely because
+modification has been made.
+
+  If you convey an object code work under this section in, or with, or
+specifically for use in, a User Product, and the conveying occurs as
+part of a transaction in which the right of possession and use of the
+User Product is transferred to the recipient in perpetuity or for a
+fixed term (regardless of how the transaction is characterized), the
+Corresponding Source conveyed under this section must be accompanied
+by the Installation Information.  But this requirement does not apply
+if neither you nor any third party retains the ability to install
+modified object code on the User Product (for example, the work has
+been installed in ROM).
+
+  The requirement to provide Installation Information does not include a
+requirement to continue to provide support service, warranty, or updates
+for a work that has been modified or installed by the recipient, or for
+the User Product in which it has been modified or installed.  Access to a
+network may be denied when the modification itself materially and
+adversely affects the operation of the network or violates the rules and
+protocols for communication across the network.
+
+  Corresponding Source conveyed, and Installation Information provided,
+in accord with this section must be in a format that is publicly
+documented (and with an implementation available to the public in
+source code form), and must require no special password or key for
+unpacking, reading or copying.
+
+  7. Additional Terms.
+
+  "Additional permissions" are terms that supplement the terms of this
+License by making exceptions from one or more of its conditions.
+Additional permissions that are applicable to the entire Program shall
+be treated as though they were included in this License, to the extent
+that they are valid under applicable law.  If additional permissions
+apply only to part of the Program, that part may be used separately
+under those permissions, but the entire Program remains governed by
+this License without regard to the additional permissions.
+
+  When you convey a copy of a covered work, you may at your option
+remove any additional permissions from that copy, or from any part of
+it.  (Additional permissions may be written to require their own
+removal in certain cases when you modify the work.)  You may place
+additional permissions on material, added by you to a covered work,
+for which you have or can give appropriate copyright permission.
+
+  Notwithstanding any other provision of this License, for material you
+add to a covered work, you may (if authorized by the copyright holders of
+that material) supplement the terms of this License with terms:
+
+    a) Disclaiming warranty or limiting liability differently from the
+    terms of sections 15 and 16 of this License; or
+
+    b) Requiring preservation of specified reasonable legal notices or
+    author attributions in that material or in the Appropriate Legal
+    Notices displayed by works containing it; or
+
+    c) Prohibiting misrepresentation of the origin of that material, or
+    requiring that modified versions of such material be marked in
+    reasonable ways as different from the original version; or
+
+    d) Limiting the use for publicity purposes of names of licensors or
+    authors of the material; or
+
+    e) Declining to grant rights under trademark law for use of some
+    trade names, trademarks, or service marks; or
+
+    f) Requiring indemnification of licensors and authors of that
+    material by anyone who conveys the material (or modified versions of
+    it) with contractual assumptions of liability to the recipient, for
+    any liability that these contractual assumptions directly impose on
+    those licensors and authors.
+
+  All other non-permissive additional terms are considered "further
+restrictions" within the meaning of section 10.  If the Program as you
+received it, or any part of it, contains a notice stating that it is
+governed by this License along with a term that is a further
+restriction, you may remove that term.  If a license document contains
+a further restriction but permits relicensing or conveying under this
+License, you may add to a covered work material governed by the terms
+of that license document, provided that the further restriction does
+not survive such relicensing or conveying.
+
+  If you add terms to a covered work in accord with this section, you
+must place, in the relevant source files, a statement of the
+additional terms that apply to those files, or a notice indicating
+where to find the applicable terms.
+
+  Additional terms, permissive or non-permissive, may be stated in the
+form of a separately written license, or stated as exceptions;
+the above requirements apply either way.
+
+  8. Termination.
+
+  You may not propagate or modify a covered work except as expressly
+provided under this License.  Any attempt otherwise to propagate or
+modify it is void, and will automatically terminate your rights under
+this License (including any patent licenses granted under the third
+paragraph of section 11).
+
+  However, if you cease all violation of this License, then your
+license from a particular copyright holder is reinstated (a)
+provisionally, unless and until the copyright holder explicitly and
+finally terminates your license, and (b) permanently, if the copyright
+holder fails to notify you of the violation by some reasonable means
+prior to 60 days after the cessation.
+
+  Moreover, your license from a particular copyright holder is
+reinstated permanently if the copyright holder notifies you of the
+violation by some reasonable means, this is the first time you have
+received notice of violation of this License (for any work) from that
+copyright holder, and you cure the violation prior to 30 days after
+your receipt of the notice.
+
+  Termination of your rights under this section does not terminate the
+licenses of parties who have received copies or rights from you under
+this License.  If your rights have been terminated and not permanently
+reinstated, you do not qualify to receive new licenses for the same
+material under section 10.
+
+  9. Acceptance Not Required for Having Copies.
+
+  You are not required to accept this License in order to receive or
+run a copy of the Program.  Ancillary propagation of a covered work
+occurring solely as a consequence of using peer-to-peer transmission
+to receive a copy likewise does not require acceptance.  However,
+nothing other than this License grants you permission to propagate or
+modify any covered work.  These actions infringe copyright if you do
+not accept this License.  Therefore, by modifying or propagating a
+covered work, you indicate your acceptance of this License to do so.
+
+  10. Automatic Licensing of Downstream Recipients.
+
+  Each time you convey a covered work, the recipient automatically
+receives a license from the original licensors, to run, modify and
+propagate that work, subject to this License.  You are not responsible
+for enforcing compliance by third parties with this License.
+
+  An "entity transaction" is a transaction transferring control of an
+organization, or substantially all assets of one, or subdividing an
+organization, or merging organizations.  If propagation of a covered
+work results from an entity transaction, each party to that
+transaction who receives a copy of the work also receives whatever
+licenses to the work the party's predecessor in interest had or could
+give under the previous paragraph, plus a right to possession of the
+Corresponding Source of the work from the predecessor in interest, if
+the predecessor has it or can get it with reasonable efforts.
+
+  You may not impose any further restrictions on the exercise of the
+rights granted or affirmed under this License.  For example, you may
+not impose a license fee, royalty, or other charge for exercise of
+rights granted under this License, and you may not initiate litigation
+(including a cross-claim or counterclaim in a lawsuit) alleging that
+any patent claim is infringed by making, using, selling, offering for
+sale, or importing the Program or any portion of it.
+
+  11. Patents.
+
+  A "contributor" is a copyright holder who authorizes use under this
+License of the Program or a work on which the Program is based.  The
+work thus licensed is called the contributor's "contributor version".
+
+  A contributor's "essential patent claims" are all patent claims
+owned or controlled by the contributor, whether already acquired or
+hereafter acquired, that would be infringed by some manner, permitted
+by this License, of making, using, or selling its contributor version,
+but do not include claims that would be infringed only as a
+consequence of further modification of the contributor version.  For
+purposes of this definition, "control" includes the right to grant
+patent sublicenses in a manner consistent with the requirements of
 this License.
 
-  7. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
+  Each contributor grants you a non-exclusive, worldwide, royalty-free
+patent license under the contributor's essential patent claims, to
+make, use, sell, offer for sale, import and otherwise run, modify and
+propagate the contents of its contributor version.
+
+  In the following three paragraphs, a "patent license" is any express
+agreement or commitment, however denominated, not to enforce a patent
+(such as an express permission to practice a patent or covenant not to
+sue for patent infringement).  To "grant" such a patent license to a
+party means to make such an agreement or commitment not to enforce a
+patent against the party.
+
+  If you convey a covered work, knowingly relying on a patent license,
+and the Corresponding Source of the work is not available for anyone
+to copy, free of charge and under the terms of this License, through a
+publicly available network server or other readily accessible means,
+then you must either (1) cause the Corresponding Source to be so
+available, or (2) arrange to deprive yourself of the benefit of the
+patent license for this particular work, or (3) arrange, in a manner
+consistent with the requirements of this License, to extend the patent
+license to downstream recipients.  "Knowingly relying" means you have
+actual knowledge that, but for the patent license, your conveying the
+covered work in a country, or your recipient's use of the covered work
+in a country, would infringe one or more identifiable patents in that
+country that you have reason to believe are valid.
+
+  If, pursuant to or in connection with a single transaction or
+arrangement, you convey, or propagate by procuring conveyance of, a
+covered work, and grant a patent license to some of the parties
+receiving the covered work authorizing them to use, propagate, modify
+or convey a specific copy of the covered work, then the patent license
+you grant is automatically extended to all recipients of the covered
+work and works based on it.
+
+  A patent license is "discriminatory" if it does not include within
+the scope of its coverage, prohibits the exercise of, or is
+conditioned on the non-exercise of one or more of the rights that are
+specifically granted under this License.  You may not convey a covered
+work if you are a party to an arrangement with a third party that is
+in the business of distributing software, under which you make payment
+to the third party based on the extent of your activity of conveying
+the work, and under which the third party grants, to any of the
+parties who would receive the covered work from you, a discriminatory
+patent license (a) in connection with copies of the covered work
+conveyed by you (or copies made from those copies), or (b) primarily
+for and in connection with specific products or compilations that
+contain the covered work, unless you entered into that arrangement,
+or that patent license was granted, prior to 28 March 2007.
+
+  Nothing in this License shall be construed as excluding or limiting
+any implied license or other defenses to infringement that may
+otherwise be available to you under applicable patent law.
+
+  12. No Surrender of Others' Freedom.
+
+  If conditions are imposed on you (whether by court order, agreement or
 otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License.  If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Program at all.  For example, if a patent
-license would not permit royalty-free redistribution of the Program by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Program.
+excuse you from the conditions of this License.  If you cannot convey a
+covered work so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you may
+not convey it at all.  For example, if you agree to terms that obligate you
+to collect a royalty for further conveying from those to whom you convey
+the Program, the only way you could satisfy both those terms and this
+License would be to refrain entirely from conveying the Program.
 
-If any portion of this section is held invalid or unenforceable under
-any particular circumstance, the balance of the section is intended to
-apply and the section as a whole is intended to apply in other
-circumstances.
+  13. Use with the GNU Affero General Public License.
 
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system, which is
-implemented by public license practices.  Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
+  Notwithstanding any other provision of this License, you have
+permission to link or combine any covered work with a work licensed
+under version 3 of the GNU Affero General Public License into a single
+combined work, and to convey the resulting work.  The terms of this
+License will continue to apply to the part which is the covered work,
+but the special requirements of the GNU Affero General Public License,
+section 13, concerning interaction through a network will apply to the
+combination as such.
 
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
-  8. If the distribution and/or use of the Program is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Program under this License
-may add an explicit geographical distribution limitation excluding
-those countries, so that distribution is permitted only in or among
-countries not thus excluded.  In such case, this License incorporates
-the limitation as if written in the body of this License.
+  14. Revised Versions of this License.
 
-  9. The Free Software Foundation may publish revised and/or new versions
-of the General Public License from time to time.  Such new versions will
+  The Free Software Foundation may publish revised and/or new versions of
+the GNU General Public License from time to time.  Such new versions will
 be similar in spirit to the present version, but may differ in detail to
 address new problems or concerns.
 
-Each version is given a distinguishing version number.  If the Program
-specifies a version number of this License which applies to it and "any
-later version", you have the option of following the terms and conditions
-either of that version or of any later version published by the Free
-Software Foundation.  If the Program does not specify a version number of
-this License, you may choose any version ever published by the Free Software
-Foundation.
+  Each version is given a distinguishing version number.  If the
+Program specifies that a certain numbered version of the GNU General
+Public License "or any later version" applies to it, you have the
+option of following the terms and conditions either of that numbered
+version or of any later version published by the Free Software
+Foundation.  If the Program does not specify a version number of the
+GNU General Public License, you may choose any version ever published
+by the Free Software Foundation.
 
-  10. If you wish to incorporate parts of the Program into other free
-programs whose distribution conditions are different, write to the author
-to ask for permission.  For software which is copyrighted by the Free
-Software Foundation, write to the Free Software Foundation; we sometimes
-make exceptions for this.  Our decision will be guided by the two goals
-of preserving the free status of all derivatives of our free software and
-of promoting the sharing and reuse of software generally.
+  If the Program specifies that a proxy can decide which future
+versions of the GNU General Public License can be used, that proxy's
+public statement of acceptance of a version permanently authorizes you
+to choose that version for the Program.
 
-			    NO WARRANTY
+  Later license versions may give you additional or different
+permissions.  However, no additional obligations are imposed on any
+author or copyright holder as a result of your choosing to follow a
+later version.
 
-  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
-FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
-OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
-PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
-TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
-PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
-REPAIR OR CORRECTION.
+  15. Disclaimer of Warranty.
 
-  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
-REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
-INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
-OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
-TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
-YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
-PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGES.
+  THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
+APPLICABLE LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
+HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
+OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
+THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
+IS WITH YOU.  SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
+ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
 
-		     END OF TERMS AND CONDITIONS
-
-	Appendix: How to Apply These Terms to Your New Programs
+  16. Limitation of Liability.
+
+  IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
+THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
+GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
+USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
+DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
+PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
+EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
+SUCH DAMAGES.
+
+  17. Interpretation of Sections 15 and 16.
+
+  If the disclaimer of warranty and limitation of liability provided
+above cannot be given local legal effect according to their terms,
+reviewing courts shall apply local law that most closely approximates
+an absolute waiver of all civil liability in connection with the
+Program, unless a warranty or assumption of liability accompanies a
+copy of the Program in return for a fee.
+
+                     END OF TERMS AND CONDITIONS
+
+            How to Apply These Terms to Your New Programs
 
   If you develop a new program, and you want it to be of the greatest
 possible use to the public, the best way to achieve this is to make it
@@ -287,15 +628,15 @@ free software which everyone can redistribute and change under these terms.
 
   To do so, attach the following notices to the program.  It is safest
 to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least
+state the exclusion of warranty; and each file should have at least
 the "copyright" line and a pointer to where the full notice is found.
 
     <one line to give the program's name and a brief idea of what it does.>
-    Copyright (C) 19yy  <name of author>
+    Copyright (C) <year>  <name of author>
 
-    This program is free software; you can redistribute it and/or modify
+    This program is free software: you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
+    the Free Software Foundation, either version 3 of the License, or
     (at your option) any later version.
 
     This program is distributed in the hope that it will be useful,
@@ -304,36 +645,30 @@ the "copyright" line and a pointer to where the full notice is found.
     GNU General Public License for more details.
 
     You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+    along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 Also add information on how to contact you by electronic and paper mail.
 
-If the program is interactive, make it output a short notice like this
-when it starts in an interactive mode:
+  If the program does terminal interaction, make it output a short
+notice like this when it starts in an interactive mode:
 
-    Gnomovision version 69, Copyright (C) 19yy name of author
-    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+    <program>  Copyright (C) <year>  <name of author>
+    This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
     This is free software, and you are welcome to redistribute it
     under certain conditions; type `show c' for details.
 
 The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License.  Of course, the commands you use may
-be called something other than `show w' and `show c'; they could even be
-mouse-clicks or menu items--whatever suits your program.
+parts of the General Public License.  Of course, your program's commands
+might be different; for a GUI interface, you would use an "about box".
 
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a "copyright disclaimer" for the program, if
-necessary.  Here is a sample; alter the names:
+  You should also get your employer (if you work as a programmer) or school,
+if any, to sign a "copyright disclaimer" for the program, if necessary.
+For more information on this, and how to apply and follow the GNU GPL, see
+<http://www.gnu.org/licenses/>.
 
-  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
-  `Gnomovision' (which makes passes at compilers) written by James Hacker.
-
-  <signature of Ty Coon>, 1 April 1989
-  Ty Coon, President of Vice
-
-This General Public License does not permit incorporating your program into
-proprietary programs.  If your program is a subroutine library, you may
-consider it more useful to permit linking proprietary applications with the
-library.  If this is what you want to do, use the GNU Library General
-Public License instead of this License.
+  The GNU General Public License does not permit incorporating your program
+into proprietary programs.  If your program is a subroutine library, you
+may consider it more useful to permit linking proprietary applications with
+the library.  If this is what you want to do, use the GNU Lesser General
+Public License instead of this License.  But first, please read
+<http://www.gnu.org/philosophy/why-not-lgpl.html>.

Doxyfile

@@ -0,0 +1,187 @@
+# Doxyfile 1.2.15
+
+#---------------------------------------------------------------------------
+# General configuration options
+#---------------------------------------------------------------------------
+PROJECT_NAME           = rsync
+PROJECT_NUMBER         = HEAD
+OUTPUT_DIRECTORY       = dox
+OUTPUT_LANGUAGE        = English
+EXTRACT_ALL            = YES
+EXTRACT_PRIVATE        = YES
+EXTRACT_STATIC         = YES
+EXTRACT_LOCAL_CLASSES  = YES
+HIDE_UNDOC_MEMBERS     = NO
+HIDE_UNDOC_CLASSES     = NO
+BRIEF_MEMBER_DESC      = YES
+REPEAT_BRIEF           = YES
+ALWAYS_DETAILED_SEC    = NO
+INLINE_INHERITED_MEMB  = NO
+FULL_PATH_NAMES        = NO
+STRIP_FROM_PATH        = *source
+INTERNAL_DOCS          = YES
+STRIP_CODE_COMMENTS    = NO
+CASE_SENSE_NAMES       = YES
+SHORT_NAMES            = NO
+HIDE_SCOPE_NAMES       = YES
+VERBATIM_HEADERS       = YES
+SHOW_INCLUDE_FILES     = YES
+JAVADOC_AUTOBRIEF      = YES
+INHERIT_DOCS           = YES
+INLINE_INFO            = YES
+SORT_MEMBER_DOCS       = NO
+DISTRIBUTE_GROUP_DOC   = NO
+TAB_SIZE               = 8
+GENERATE_TODOLIST      = YES
+GENERATE_TESTLIST      = YES
+GENERATE_BUGLIST       = YES
+ALIASES                = 
+ENABLED_SECTIONS       = 
+MAX_INITIALIZER_LINES  = 30
+OPTIMIZE_OUTPUT_FOR_C  = YES
+OPTIMIZE_OUTPUT_JAVA   = NO
+SHOW_USED_FILES        = YES
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+QUIET                  = NO
+WARNINGS               = NO
+WARN_IF_UNDOCUMENTED   = NO
+WARN_FORMAT            = "$file:$line: $text"
+WARN_LOGFILE           = 
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+INPUT                  = .
+FILE_PATTERNS          = *.c \
+                         *.h
+RECURSIVE              = YES
+EXCLUDE                = proto.h \
+                         zlib \
+                         popt
+EXCLUDE_SYMLINKS       = NO
+EXCLUDE_PATTERNS       = 
+EXAMPLE_PATH           = 
+EXAMPLE_PATTERNS       = 
+EXAMPLE_RECURSIVE      = NO
+IMAGE_PATH             = 
+INPUT_FILTER           = 
+FILTER_SOURCE_FILES    = NO
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+SOURCE_BROWSER         = YES
+INLINE_SOURCES         = YES
+REFERENCED_BY_RELATION = YES
+REFERENCES_RELATION    = YES
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+ALPHABETICAL_INDEX     = YES
+COLS_IN_ALPHA_INDEX    = 3
+IGNORE_PREFIX          = 
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+GENERATE_HTML          = YES
+HTML_OUTPUT            = html
+HTML_FILE_EXTENSION    = .html
+HTML_HEADER            = 
+HTML_FOOTER            = 
+HTML_STYLESHEET        = 
+HTML_ALIGN_MEMBERS     = YES
+GENERATE_HTMLHELP      = NO
+GENERATE_CHI           = NO
+BINARY_TOC             = NO
+TOC_EXPAND             = NO
+DISABLE_INDEX          = NO
+ENUM_VALUES_PER_LINE   = 3
+GENERATE_TREEVIEW      = NO
+TREEVIEW_WIDTH         = 250
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+GENERATE_LATEX         = NO
+LATEX_OUTPUT           = latex
+LATEX_CMD_NAME         = latex
+MAKEINDEX_CMD_NAME     = makeindex
+COMPACT_LATEX          = NO
+PAPER_TYPE             = a4wide
+EXTRA_PACKAGES         = 
+LATEX_HEADER           = 
+PDF_HYPERLINKS         = YES
+USE_PDFLATEX           = YES
+LATEX_BATCHMODE        = YES
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+GENERATE_RTF           = NO
+RTF_OUTPUT             = rtf
+COMPACT_RTF            = NO
+RTF_HYPERLINKS         = NO
+RTF_STYLESHEET_FILE    = 
+RTF_EXTENSIONS_FILE    = 
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+GENERATE_MAN           = NO
+MAN_OUTPUT             = man
+MAN_EXTENSION          = .3
+MAN_LINKS              = NO
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+GENERATE_XML           = NO
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+GENERATE_AUTOGEN_DEF   = NO
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor   
+#---------------------------------------------------------------------------
+ENABLE_PREPROCESSING   = NO
+MACRO_EXPANSION        = NO
+EXPAND_ONLY_PREDEF     = NO
+SEARCH_INCLUDES        = YES
+INCLUDE_PATH           = 
+INCLUDE_FILE_PATTERNS  = 
+PREDEFINED             = 
+EXPAND_AS_DEFINED      = 
+SKIP_FUNCTION_MACROS   = YES
+#---------------------------------------------------------------------------
+# Configuration::addtions related to external references   
+#---------------------------------------------------------------------------
+TAGFILES               = 
+GENERATE_TAGFILE       = 
+ALLEXTERNALS           = NO
+EXTERNAL_GROUPS        = YES
+PERL_PATH              = /usr/bin/perl
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool   
+#---------------------------------------------------------------------------
+CLASS_DIAGRAMS         = YES
+HAVE_DOT               = YES
+CLASS_GRAPH            = YES
+COLLABORATION_GRAPH    = YES
+TEMPLATE_RELATIONS     = YES
+HIDE_UNDOC_RELATIONS   = YES
+INCLUDE_GRAPH          = YES
+INCLUDED_BY_GRAPH      = YES
+GRAPHICAL_HIERARCHY    = YES
+DOT_IMAGE_FORMAT       = png
+DOT_PATH               = 
+DOTFILE_DIRS           = 
+MAX_DOT_GRAPH_WIDTH    = 1024
+MAX_DOT_GRAPH_HEIGHT   = 1024
+GENERATE_LEGEND        = YES
+DOT_CLEANUP            = YES
+#---------------------------------------------------------------------------
+# Configuration::addtions related to the search engine   
+#---------------------------------------------------------------------------
+SEARCHENGINE           = NO
+CGI_NAME               = search.cgi
+CGI_URL                = 
+DOC_URL                = 
+DOC_ABSPATH            = 
+BIN_ABSPATH            = /usr/local/bin/
+EXT_DOC_PATHS          = 

INSTALL

@@ -0,0 +1,63 @@
+To build and install rsync:
+
+  $ ./configure
+  $ make
+  # make install
+
+You may set the installation directory and other parameters by options
+to ./configure.  To see them, use:
+
+  $ ./configure --help
+
+Configure tries to figure out if the local system uses group "nobody" or
+"nogroup" by looking in the /etc/group file.  (This is only used for the
+default group of an rsync daemon, which attempts to run with "nobody"
+user and group permissions.)  You can change the default user and group
+for the daemon by editing the NOBODY_USER and NOBODY_GROUP defines in
+config.h, or just override them in your /etc/rsyncd.conf file.
+
+As of 2.4.7, rsync uses Eric Troan's popt option-parsing library.  A
+cut-down copy of release 1.6.4 is included in the rsync distribution,
+and will be used if there is no popt library on your build host, or if
+the --with-included-popt option is passed to ./configure.
+
+If you configure using --enable-maintainer-mode, then rsync will try
+to pop up an xterm on DISPLAY=:0 if it crashes.  You might find this
+useful, but it should be turned off for production builds.
+
+RPM NOTES
+---------
+
+Under packaging you will find .spec files for several distributions.
+The .spec file in packaging/lsb can be used for Linux systems that
+adhere to the Linux Standards Base (e.g., RedHat and others).
+
+HP-UX NOTES
+-----------
+
+The HP-UX 10.10 "bundled" C compiler seems not to be able to cope with
+ANSI C.  You may see this error message in config.log if ./configure
+fails:
+
+  (Bundled) cc: "configure", line 2162: error 1705: Function prototypes are an ANSI feature.
+
+Install gcc or HP's "ANSI/C Compiler".
+
+MAC OSX NOTES
+-------------
+
+Some versions of Mac OS X (Darwin) seem to have an IPv6 stack, but do
+not completely implement the "New Sockets" API.  
+
+<http://www.ipv6.org/impl/mac.html> says that Apple started to support
+IPv6 in 10.2 (Jaguar).  If your build fails, try again after running
+configure with --disable-ipv6.
+
+IBM AIX NOTES
+-------------
+
+IBM AIX has a largefile problem with mkstemp.  See IBM PR-51921.
+The workaround is to append the below to config.h
+	#ifdef _LARGE_FILES
+	#undef HAVE_SECURE_MKSTEMP
+	#endif

Makefile.in

@@ -2,6 +2,7 @@
 # Makefile
 
 prefix=@prefix@
+datarootdir=@datarootdir@
 exec_prefix=@exec_prefix@
 bindir=@bindir@
 mandir=@mandir@
@@ -9,65 +10,177 @@ mandir=@mandir@
 LIBS=@LIBS@
 CC=@CC@
 CFLAGS=@CFLAGS@
+CPPFLAGS=@CPPFLAGS@
+EXEEXT=@EXEEXT@
+LDFLAGS=@LDFLAGS@
 
 INSTALLCMD=@INSTALL@
+INSTALLMAN=@INSTALL@
 
 srcdir=@srcdir@
 VPATH=$(srcdir)
 SHELL=/bin/sh
 
+VERSION=@VERSION@
 
 .SUFFIXES:
 .SUFFIXES: .c .o
 
-LIBOBJ=lib/getopt.o lib/fnmatch.o lib/compat.o lib/snprintf.o lib/mdfour.o
-ZLIBOBJ=zlib/deflate.o zlib/infblock.o zlib/infcodes.o zlib/inffast.o \
-	zlib/inflate.o zlib/inftrees.o zlib/infutil.o zlib/trees.o \
-	zlib/zutil.o zlib/adler32.o 
-OBJS1=rsync.o generator.o receiver.o cleanup.o sender.o exclude.o util.o main.o checksum.o match.o syscall.o log.o
-OBJS2=options.o flist.o io.o compat.o hlink.o token.o uidlist.o socket.o fileio.o
+GENFILES=configure.sh config.h.in proto.h proto.h-tstamp rsync.1 rsyncd.conf.5
+HEADERS=byteorder.h config.h errcode.h proto.h rsync.h ifuncs.h lib/pool_alloc.h
+LIBOBJ=lib/wildmatch.o lib/compat.o lib/snprintf.o lib/mdfour.o lib/md5.o \
+	lib/permstring.o lib/pool_alloc.o lib/sysacls.o lib/sysxattrs.o @LIBOBJS@
+ZLIBOBJ=zlib/deflate.o zlib/inffast.o zlib/inflate.o zlib/inftrees.o \
+	zlib/trees.o zlib/zutil.o zlib/adler32.o zlib/compress.o zlib/crc32.o
+OBJS1=flist.o rsync.o generator.o receiver.o cleanup.o sender.o exclude.o \
+	util.o main.o checksum.o match.o syscall.o log.o backup.o
+OBJS2=options.o io.o compat.o hlink.o token.o uidlist.o socket.o hashtable.o \
+	fileio.o batch.o clientname.o chmod.o acls.o xattrs.o
+OBJS3=progress.o pipe.o
 DAEMON_OBJ = params.o loadparm.o clientserver.o access.o connection.o authenticate.o
-OBJS=$(OBJS1) $(OBJS2) $(DAEMON_OBJ) $(LIBOBJ) $(ZLIBOBJ)
+popt_OBJS=popt/findme.o  popt/popt.o  popt/poptconfig.o \
+	popt/popthelp.o popt/poptparse.o
+OBJS=$(OBJS1) $(OBJS2) $(OBJS3) $(DAEMON_OBJ) $(LIBOBJ) $(ZLIBOBJ) @BUILD_POPT@
+
+TLS_OBJ = tls.o syscall.o lib/compat.o lib/snprintf.o lib/permstring.o lib/sysxattrs.o @BUILD_POPT@
+
+# Programs we must have to run the test cases
+CHECK_PROGS = rsync$(EXEEXT) tls$(EXEEXT) getgroups$(EXEEXT) getfsdev$(EXEEXT) \
+	trimslash$(EXEEXT) t_unsafe$(EXEEXT) wildtest$(EXEEXT)
+
+CHECK_SYMLINKS = testsuite/chown-fake.test testsuite/devices-fake.test
+
+# Objects for CHECK_PROGS to clean
+CHECK_OBJS=tls.o getgroups.o getfsdev.o t_stub.o t_unsafe.o trimslash.o wildtest.o
 
 # note that the -I. is needed to handle config.h when using VPATH
 .c.o:
 @OBJ_SAVE@
-	$(CC) -I. -I$(srcdir) $(CFLAGS) -c $< @CC_SHOBJ_FLAG@
+	$(CC) -I. -I$(srcdir) $(CFLAGS) $(CPPFLAGS) -c $< @CC_SHOBJ_FLAG@
 @OBJ_RESTORE@
 
-all: rsync
+all: conf_stop make_stop rsync$(EXEEXT) @MAKE_MAN@
+
+install: all
+	-mkdir -p ${DESTDIR}${bindir}
+	${INSTALLCMD} ${INSTALL_STRIP} -m 755 rsync$(EXEEXT) ${DESTDIR}${bindir}
+	-mkdir -p ${DESTDIR}${mandir}/man1
+	-mkdir -p ${DESTDIR}${mandir}/man5
+	if test -f $(srcdir)/rsync.1; then ${INSTALLMAN} -m 644 $(srcdir)/rsync.1 ${DESTDIR}${mandir}/man1; fi
+	if test -f $(srcdir)/rsyncd.conf.5; then ${INSTALLMAN} -m 644 $(srcdir)/rsyncd.conf.5 ${DESTDIR}${mandir}/man5; fi
+
+install-strip:
+	$(MAKE) INSTALL_STRIP='-s' install
+
+rsync$(EXEEXT): $(OBJS)
+	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(OBJS) $(LIBS)
+
+$(OBJS): $(HEADERS)
+$(CHECK_OBJS): $(HEADERS)
+
+flist.o: rounding.h
+
+rounding.h: rounding.c rsync.h
+	@for r in 0 1 3; do \
+	    if $(CC) $(CFLAGS) $(CPPFLAGS) $(LDFLAGS) -o rounding -DEXTRA_ROUNDING=$$r -I. $(srcdir)/rounding.c >rounding.out 2>&1; then \
+		echo "#define EXTRA_ROUNDING $$r" >rounding.h; \
+		if test -f "$$HOME/build_farm/build_test.fns"; then \
+		    echo "EXTRA_ROUNDING is $$r" >&2; \
+		fi; \
+		break; \
+	    fi; \
+	done
+	@rm -f rounding
+	@if test -f rounding.h; then : ; else \
+	    cat rounding.out 1>&2; \
+	    echo "Failed to create rounding.h!" 1>&2; \
+	    exit 1; \
+	fi
+	@rm -f rounding.out
+
+tls$(EXEEXT): $(TLS_OBJ)
+	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(TLS_OBJ) $(LIBS)
+
+getgroups$(EXEEXT): getgroups.o
+	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ getgroups.o $(LIBS)
+
+getfsdev$(EXEEXT): getfsdev.o
+	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ getfsdev.o $(LIBS)
+
+TRIMSLASH_OBJ = trimslash.o syscall.o lib/compat.o lib/snprintf.o
+trimslash$(EXEEXT): $(TRIMSLASH_OBJ)
+	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(TRIMSLASH_OBJ) $(LIBS)
+
+T_UNSAFE_OBJ = t_unsafe.o syscall.o util.o t_stub.o lib/compat.o lib/snprintf.o lib/wildmatch.o
+t_unsafe$(EXEEXT): $(T_UNSAFE_OBJ)
+	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(T_UNSAFE_OBJ) $(LIBS)
+
+gen: conf proto.h man
+
+gensend: gen
+	rsync -aivzc $(GENFILES) samba.org:/home/ftp/pub/rsync/generated-files/
+
+conf:
+	cd $(srcdir) && $(MAKE) -f prepare-source.mak conf
+
+conf_stop: configure.sh config.h.in
+
+configure.sh config.h.in: configure.in aclocal.m4
+	autoconf -o configure.sh
+	autoheader && touch config.h.in
+	@echo 'Configure files changed -- perhaps run:'
+	@echo '  make reconfigure'
+	@exit 1
+
+reconfigure: configure.sh
+	./config.status --recheck
+	./config.status
+
+make_stop: Makefile
+
+Makefile: Makefile.in config.status
+	@./config.status
+	@echo "Makefile updated -- rerun your make command."
+	@exit 1
+
+proto: proto.h-tstamp
+
+proto.h: proto.h-tstamp
+	@echo ' ' >/dev/null
+
+proto.h-tstamp: $(srcdir)/*.c $(srcdir)/lib/compat.c
+	perl $(srcdir)/mkproto.pl $(srcdir)/*.c $(srcdir)/lib/compat.c
 
 man: rsync.1 rsyncd.conf.5
 
-install: all
-	-mkdir -p ${bindir}
-	${INSTALLCMD} -m 755 rsync ${bindir}
-	-mkdir -p ${mandir}/man1
-	-mkdir -p ${mandir}/man5
-	${INSTALLCMD} -m 644 $(srcdir)/rsync.1 ${mandir}/man1
-	${INSTALLCMD} -m 644 $(srcdir)/rsyncd.conf.5 ${mandir}/man5
-
-install-strip:
-	$(MAKE) INSTALLCMD='$(INSTALLCMD) -s' install
-
-rsync: $(OBJS)
-	$(CC) $(CFLAGS) $(LDFLAGS) -o rsync $(OBJS) $(LIBS)
-
 rsync.1: rsync.yo
-	yodl2man -o rsync.1 rsync.yo
+	yodl2man -o rsync.1 $(srcdir)/rsync.yo
+	-$(srcdir)/tweak_manpage rsync.1
 
 rsyncd.conf.5: rsyncd.conf.yo
-	yodl2man -o rsyncd.conf.5 rsyncd.conf.yo
+	yodl2man -o rsyncd.conf.5 $(srcdir)/rsyncd.conf.yo
+	-$(srcdir)/tweak_manpage rsyncd.conf.5
 
-proto:
-	cat *.c | awk -f mkproto.awk > proto.h
+clean: cleantests
+	rm -f *~ $(OBJS) $(CHECK_PROGS) $(CHECK_OBJS) $(CHECK_SYMLINKS) \
+		rounding rounding.h
 
-clean:
-	rm -f *~ $(OBJS) rsync 
+cleantests:
+	rm -rf ./testtmp*
 
+# We try to delete built files from both the source and build
+# directories, just in case somebody previously configured things in
+# the source directory.
 distclean: clean
-	rm -f config.h config.cache config.status Makefile
-
+	rm -f Makefile config.h config.status
+	rm -f lib/dummy popt/dummy zlib/dummy
+	rm -f $(srcdir)/Makefile $(srcdir)/config.h $(srcdir)/config.status
+	rm -f $(srcdir)/lib/dummy $(srcdir)/popt/dummy $(srcdir)/zlib/dummy
+	rm -f config.cache config.log
+	rm -f $(srcdir)/config.cache $(srcdir)/config.log
+	rm -f shconfig $(srcdir)/shconfig
+	rm -f $(GENFILES)
+	rm -rf autom4te.cache
 
 # this target is really just for my use. It only works on a limited
 # range of machines and is used to produce a list of potentially
@@ -75,4 +188,68 @@ distclean: clean
 finddead:
 	nm *.o */*.o |grep 'U ' | awk '{print $$2}' | sort -u > nmused.txt
 	nm *.o */*.o |grep 'T ' | awk '{print $$3}' | sort -u > nmfns.txt
-	comm -13 nmused.txt nmfns.txt 
+	comm -13 nmused.txt nmfns.txt
+
+# 'check' is the GNU name, 'test' is the name for everybody else :-)
+.PHONY: check test
+
+test: check
+
+# There seems to be no standard way to specify some variables as
+# exported from a Makefile apart from listing them like this.
+
+# This depends on building rsync; if we need any helper programs it
+# should depend on them too.
+
+# We try to run the scripts with POSIX mode on, in the hope that will
+# catch Bash-isms earlier even if we're running on GNU.  Of course, we
+# might lose in the future where POSIX diverges from old sh.
+
+check: all $(CHECK_PROGS) $(CHECK_SYMLINKS)
+	rsync_bin=`pwd`/rsync$(EXEEXT) $(srcdir)/runtests.sh
+
+check29: all $(CHECK_PROGS) $(CHECK_SYMLINKS)
+	rsync_bin=`pwd`/rsync$(EXEEXT) $(srcdir)/runtests.sh --protocol=29
+
+wildtest.o: wildtest.c lib/wildmatch.c rsync.h config.h
+wildtest$(EXEEXT): wildtest.o lib/compat.o lib/snprintf.o @BUILD_POPT@
+	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ wildtest.o lib/compat.o lib/snprintf.o @BUILD_POPT@ $(LIBS)
+
+testsuite/chown-fake.test:
+	ln -s chown.test $(srcdir)/testsuite/chown-fake.test
+
+testsuite/devices-fake.test:
+	ln -s devices.test $(srcdir)/testsuite/devices-fake.test
+
+# This does *not* depend on building or installing: you can use it to
+# check a version installed from a binary or some other source tree,
+# if you want.
+
+installcheck: $(CHECK_PROGS) $(CHECK_SYMLINKS)
+	POSIXLY_CORRECT=1 TOOLDIR=`pwd` rsync_bin="$(bindir)/rsync$(EXEEXT)" srcdir="$(srcdir)" $(srcdir)/runtests.sh
+
+# TODO: Add 'dist' target; need to know which files will be included
+
+# Run the SPLINT (Secure Programming Lint) tool.  <www.splint.org>
+.PHONY: splint
+splint:
+	splint +unixlib +gnuextensions -weak rsync.c
+
+
+rsync.dvi: doc/rsync.texinfo
+	texi2dvi -o $@ $<
+
+rsync.ps: rsync.dvi
+	dvips -ta4 -o $@ $<
+
+rsync.pdf: doc/rsync.texinfo
+	texi2dvi -o $@ --pdf $<
+
+
+doxygen:
+	cd $(srcdir) && rm dox/html/* && doxygen
+
+# for maintainers only
+doxygen-upload:
+	rsync -avzv $(srcdir)/dox/html/ --delete \
+	samba.org:/home/httpd/html/rsync/doxygen/head/

NEWS

@@ -0,0 +1,136 @@
+NEWS for rsync 3.0.1 (3 Apr 2008)
+Protocol: 30 (unchanged)
+Changes since 3.0.0:
+
+  NOTABLE CHANGES IN BEHAVIOR:
+
+    - Added the 'c'-flag to the itemizing of non-regular files so that the
+      itemized output doesn't get hidden if there were no attribute changes,
+      and also so that the itemizing of a --copy-links run will distinguish
+      between copying an identical non-regular file and the creation of a
+      revised version with a new value (e.g. a changed symlink referent, a
+      new device number, etc.).
+
+  BUG FIXES:
+
+    - Fixed a crash bug when a single-use rsync daemon (via remote shell) was
+      run without specifying a --config=FILE option.
+
+    - Fixed a crash when backing up a directory that has a default ACL.
+
+    - Fixed a bug in the handling of xattr values that could cause rsync to
+      not think that a file's extended attributes are up-to-date.
+
+    - Fixed the working of --fake-super with --link-dest and --xattrs.
+
+    - Fixed a hang when combining --dry-run with --remove-source-files.
+
+    - Fixed a bug with --iconv's handling of files that cannot be converted:
+      a failed name can no longer cause a transfer failure.
+
+    - Fixed the building of the rounding.h file on systems that need custom
+      CPPFLAGS to be used.  Also improved the error reporting if the building
+      of rounding.h fails.
+
+    - Fixed the use of the --protect-args (-s) option when talking to a daemon.
+
+    - Fixed the --ignore-existing option's protection of files on the receiver
+      that are non-regular files on the sender (e.g. if a symlink or a dir on
+      the sender is trying to replace a file on the receiver).  The reverse
+      protection (protecting a dir/symlink/device from being replaced by a
+      file) was already working.
+
+    - Fixed an assert failure if --hard-links is combined with an option that
+      can skip a file in a set of hard-linked files (i.e. --ignore-existing,
+      --append, etc.), without skipping all the files in the set.
+
+    - Avoid setting the modify time on a directory that already has the right
+      modify time set.  This avoids tweaking the dir's ctime.
+
+    - Improved the daemon-exclude handling to do a better job of applying the
+      exclude rules to path entries.  It also sends the user an error just as
+      if the files were actually missing (instead of silently ignoring the
+      user's args), and avoids sending the user the filter-action messages
+      for these non-user-initiated rules.
+
+    - Fixed some glitches with the dry-run code's missing-directory
+      handling, including a problem when combined with --fuzzy.
+
+    - Fixed some glitches with the skipped-directory handling.
+
+    - Fixed the 'T'-flag itemizing of symlinks when --time isn't preserved.
+
+    - Fixed a glitch in the itemizing of permissions with the -E option.
+
+    - The --append option's restricting of transfers to those that add data no
+      longer prevents the updating of non-content changes to otherwise up-to-
+      date files (i.e. those with the same content but differing permissions,
+      ownership, xattrs, etc.).
+
+    - Don't allow --fake-super to be specified with -XX (double --xattrs)
+      because the options conflict.  If a daemon has "fake super" enabled,
+      it automatically downgrades a -XX request to -X.
+
+    - Fixed a couple bugs in the parsing of daemon-config excludes that could
+      make a floating exclude rule get treated as matching an absolute path.
+
+    - A daemon doesn't try to auto-refuse the "iconv" option if iconv-support
+      wasn't compiled in to the daemon (avoiding a warning in the logs).
+
+    - Fixed the inclusion of per-dir merge files from implied dirs.
+
+    - Fixed the support/rrsync script to work with the latest options that
+      rsync sends (including its flag-specifying use of -e to the server).
+
+  ENHANCEMENTS:
+
+    - Added the --old-dirs (--old-d) option to make it easier for a user to
+      ask for file-listings with older rsync versions (this is easier than
+      having to type "-r --exclude='/*/*'" manually).
+
+    - When getting an error while asking an older rsync daemon for a file
+      listing, rsync will try to notice if the error is a rejection of the
+      --dirs (-d) option and let the user know how to work around the issue.
+
+    - Added a few more --no-OPTION overrides.
+
+    - Improved the documentation of the --append option.
+
+    - Improved the documentation of the filter/exclude/include daemon
+      parameters.
+
+  INTERNAL:
+
+    - Fixed a couple minor bugs in the included popt library (ones which I
+      sent to the official popt project for inclusion in the 1.14 release).
+
+    - Fixed a stat() call that should have been do_stat() so that the proper
+      normal/64-bit stat() function gets called.  (Was in an area that should
+      not have caused problems, though.)
+
+    - Changed the file-glob code to do a directory scan without using the
+      "glob" and "glob.h".  This lets us do the globbing with less memory
+      churn, and also avoid adding daemon-excluded items to the returned
+      args.
+
+  DEVELOPER RELATED:
+
+    - The configure script tries to get the user's compiler to not warn about
+      unused function parameters if the build is not including one or more of
+      the ACL/xattrs/iconv features.
+
+    - The configure script now has better checks for figuring out if the
+      included popt code should be used or not.
+
+    - Fixed two testsuite glitches: avoid a failure if someone's "cd" command
+      outputs the current directory when cd-ing to a relative path, and made
+      the itemized test query how rsync was built to determine if it should
+      expect hard-linked symlinks or not.
+
+    - Updated the testsuite to verify that various bug fixes remain fixed.
+
+    - The RPM spec file was updated to have: (1) comments for how to use the
+      rsync-patch tar file, and (2) an /etc/xinetd.d/rsync file.
+
+    - Updated the build scripts to work with a revised FTP directory
+      structure.

README

@@ -1,7 +1,7 @@
 WHAT IS RSYNC?
 --------------
 
-rsync is a replacement for rcp that has many more features.
+rsync is a replacement for scp/rcp that has many more features.
 
 rsync uses the "rsync algorithm" which provides a very fast method for
 bringing remote files into sync. It does this by sending just the
@@ -18,83 +18,25 @@ this package.
 USAGE
 -----
 
-Basically you use rsync just like rcp, but rsync has many additional options.
+Basically you use rsync just like rcp, but rsync has many additional
+options.  To get a complete list of supported options type
 
-Here is a brief description of rsync usage:
-
-Usage: rsync [OPTION]... SRC [SRC]... [USER@]HOST:DEST
-  or   rsync [OPTION]... [USER@]HOST:SRC DEST
-  or   rsync [OPTION]... SRC [SRC]... DEST
-  or   rsync [OPTION]... [USER@]HOST::SRC [DEST]
-  or   rsync [OPTION]... SRC [SRC]... [USER@]HOST::DEST
-  or   rsync [OPTION]... rsync://[USER@]HOST[:PORT]/SRC [DEST]
-SRC on single-colon remote HOST will be expanded by remote shell
-SRC on server remote HOST may contain shell wildcards or multiple
-  sources separated by space as long as they have same top-level
-
-Options
- -v, --verbose               increase verbosity
- -q, --quiet                 decrease verbosity
- -c, --checksum              always checksum
- -a, --archive               archive mode
- -r, --recursive             recurse into directories
- -R, --relative              use relative path names
- -b, --backup                make backups (default ~ suffix)
-     --suffix=SUFFIX         override backup suffix
- -u, --update                update only (don't overwrite newer files)
- -l, --links                 preserve soft links
- -L, --copy-links            treat soft links like regular files
-     --copy-unsafe-links     copy links outside the source tree
-     --safe-links            ignore links outside the destination tree
- -H, --hard-links            preserve hard links
- -p, --perms                 preserve permissions
- -o, --owner                 preserve owner (root only)
- -g, --group                 preserve group
- -D, --devices               preserve devices (root only)
- -t, --times                 preserve times
- -S, --sparse                handle sparse files efficiently
- -n, --dry-run               show what would have been transferred
- -W, --whole-file            copy whole files, no incremental checks
- -x, --one-file-system       don't cross filesystem boundaries
- -B, --block-size=SIZE       checksum blocking size (default 700)
- -e, --rsh=COMMAND           specify rsh replacement
-     --rsync-path=PATH       specify path to rsync on the remote machine
- -C, --cvs-exclude           auto ignore files in the same way CVS does
-     --delete                delete files that don't exist on the sending side
-     --delete-excluded       also delete excluded files on the receiving side
-     --partial               keep partially transferred files
-     --force                 force deletion of directories even if not empty
-     --numeric-ids           don't map uid/gid values by user/group name
-     --timeout=TIME          set IO timeout in seconds
- -I, --ignore-times          don't exclude files that match length and time
-     --size-only             only use file size when determining if a file should be transferred
- -T  --temp-dir=DIR          create temporary files in directory DIR
-     --compare-dest=DIR      also compare destination files relative to DIR
- -z, --compress              compress file data
-     --exclude=PATTERN       exclude files matching PATTERN
-     --exclude-from=FILE     exclude patterns listed in FILE
-     --include=PATTERN       don't exclude files matching PATTERN
-     --include-from=FILE     don't exclude patterns listed in FILE
-     --version               print version number
-     --daemon                run as a rsync daemon
-     --config=FILE           specify alternate rsyncd.conf file
-     --port=PORT             specify alternate rsyncd port number
-     --stats                 give some file transfer stats
-     --progress              show progress during transfer
-     --log-format=FORMAT     log file transfers using specified format
-     --password-file=FILE    get password from FILE
- -h, --help                  show this help screen
+  rsync --help
 
+and see the manual for more information.
 
 
 SETUP
 -----
 
-Rsync uses rsh or ssh for communication. It does not need to be setuid
-and requires no special privileges for installation. It does not
-require a inetd entry or a daemon. You must, however, have a working
-rsh or ssh system. Using ssh is recommended for its security
-features. 
+Rsync normally uses ssh or rsh for communication.  It does not need to
+be setuid and requires no special privileges for installation.  You
+must, however, have a working ssh or rsh system.  Using ssh is
+recommended for its security features.
+
+Alternatively, rsync can run in `daemon' mode, listening on a socket.
+This is generally used for public file distribution, although
+authentication and access control are available.
 
 To install rsync, first run the "configure" script. This will create a
 Makefile and config.h appropriate for your system. Then type
@@ -109,13 +51,13 @@ case.
 Once built put a copy of rsync in your search path on the local and
 remote systems (or use "make install"). That's it!
 
-RSYNC SERVERS
+RSYNC DAEMONS
 -------------
 
-rsync can also talk to "rsync servers" which can provide anonymous or
+rsync can also talk to "rsync daemons" which can provide anonymous or
 authenticated rsync. See the rsyncd.conf(5) man page for details on how
-to setup a rsync server. See the rsync(1) man page for info on how to
-connect to a rsync server.
+to setup an rsync daemon. See the rsync(1) man page for info on how to
+connect to an rsync daemon.
 
 
 MAILING LIST
@@ -125,25 +67,30 @@ There is a mailing list for the discussion of rsync and its
 applications. It is open to anyone to join. I will announce new
 versions on this list. 
 
-To join the mailing list send mail to listproc@samba.org with
-no subject and a body of "subscribe rsync Your Name".
+To join the mailing list see the web page at http://lists.samba.org/
 
-To send mail to everyone on the list send it to rsync@samba.org
+To send mail to everyone on the list send it to rsync@lists.samba.org
 
 
 BUG REPORTS
 -----------
 
 If you have web access then please look at
-http://rsync.samba.org/rsync/ 
 
-This will give you access to the bug tracking system used by the
-developers of rsync and will allow you to look at other bug reports or
-submit a new bug report.
+  http://rsync.samba.org/
 
-If you don't have web access then mail bug reports to
-rsync-bugs@samba.org or (if you think it will be of interest to lots
-of people) send it to rsync@samba.org
+That page contains links to the current bug list, and information on
+how to report a bug well.  You might also like to try searching the
+internet for the error message you've received, or looking in the
+mailing list archives at
+
+  http://mail-archive.com/rsync@lists.samba.org/
+
+To send a bug report, follow the instructions on the bug-tracking
+page of the web site.
+
+If you don't have web access, email your bug report to
+rsync@lists.samba.org.
 
 
 CVS TREE
@@ -153,10 +100,10 @@ If you want to get the very latest version of rsync direct from the
 source code repository then you can use anonymous cvs. You will need a
 recent version of cvs then use the following commands:
 
-	cvs -d :pserver:cvs@cvs.samba.org:/cvsroot login
+	cvs -d :pserver:cvs@pserver.samba.org:/cvsroot login
 	Password: cvs
 
-	cvs -d :pserver:cvs@cvs.samba.org:/cvsroot co rsync
+	cvs -d :pserver:cvs@pserver.samba.org:/cvsroot co rsync
 
 Look at the cvs documentation for more details.
 
@@ -164,11 +111,12 @@ Look at the cvs documentation for more details.
 COPYRIGHT
 ---------
 
-Rsync was written by Andrew Tridgell and Paul Mackerras, and is
-available under the Gnu Public License.
+rsync was originally written by Andrew Tridgell and has been improved
+by many developers around the world.  rsync may be used, modified and
+redistributed only under the terms of the GNU General Public License,
+found in the file COPYING in this distribution, or at 
 
-tridge@samba.org
-paulus@cs.anu.edu.au
+  http://www.fsf.org/licenses/gpl.html
 
 
 AVAILABILITY

TODO

@@ -0,0 +1,528 @@
+-*- indented-text -*-
+
+FEATURES ------------------------------------------------------------
+Use chroot only if supported
+Allow supplementary groups in rsyncd.conf			2002/04/09
+Handling IPv6 on old machines
+Other IPv6 stuff
+Add ACL support							2001/12/02
+proxy authentication						2002/01/23
+SOCKS								2002/01/23
+FAT support
+--diff						david.e.sewell	2002/03/15
+Add daemon --no-fork option
+Create more granular verbosity					2003/05/15
+
+DOCUMENTATION --------------------------------------------------------
+Keep list of open issues and todos on the web site
+Perhaps redo manual as SGML
+
+LOGGING --------------------------------------------------------------
+Memory accounting
+Improve error messages
+Better statistics					Rasmus	2002/03/08
+Perhaps flush stdout like syslog
+Log child death on signal
+verbose output					David Stein	2001/12/20
+internationalization
+
+DEVELOPMENT --------------------------------------------------------
+Handling duplicate names
+Use generic zlib						2002/02/25
+TDB								2002/03/12
+Splint								2002/03/12
+
+PERFORMANCE ----------------------------------------------------------
+Traverse just one directory at a time
+Allow skipping MD4 file_sum					2002/04/08
+Accelerate MD4
+
+TESTING --------------------------------------------------------------
+Torture test
+Cross-test versions						2001/08/22
+Test on kernel source
+Test large files
+Create mutator program for testing
+Create configure option to enable dangerous tests
+Create pipe program for testing
+Create test makefile target for some tests
+
+RELATED PROJECTS -----------------------------------------------------
+rsyncsh
+http://rsync.samba.org/rsync-and-debian/
+rsyncable gzip patch
+rsyncsplit as alternative to real integration with gzip?
+reverse rsync over HTTP Range
+
+
+
+FEATURES ------------------------------------------------------------
+
+
+Use chroot only if supported
+
+  If the platform doesn't support it, then don't even try.
+
+  If running as non-root, then don't fail, just give a warning.
+  (There was a thread about this a while ago?)
+
+    http://lists.samba.org/pipermail/rsync/2001-August/thread.html
+    http://lists.samba.org/pipermail/rsync/2001-September/thread.html
+
+                      --          --
+
+
+Allow supplementary groups in rsyncd.conf			2002/04/09
+
+  Perhaps allow supplementary groups to be specified in rsyncd.conf;
+  then make the first one the primary gid and all the rest be
+  supplementary gids.
+
+                      --          --
+
+
+Handling IPv6 on old machines
+
+  The KAME IPv6 patch is nice in theory but has proved a bit of a
+  nightmare in practice.  The basic idea of their patch is that rsync
+  is rewritten to use the new getaddrinfo()/getnameinfo() interface,
+  rather than gethostbyname()/gethostbyaddr() as in rsync 2.4.6.
+  Systems that don't have the new interface are handled by providing
+  our own implementation in lib/, which is selectively linked in.
+
+  The problem with this is that it is really hard to get right on
+  platforms that have a half-working implementation, so redefining
+  these functions clashes with system headers, and leaving them out
+  breaks.  This affects at least OSF/1, RedHat 5, and Cobalt, which
+  are moderately improtant.
+
+  Perhaps the simplest solution would be to have two different files
+  implementing the same interface, and choose either the new or the
+  old API.  This is probably necessary for systems that e.g. have
+  IPv6, but gethostbyaddr() can't handle it.  The Linux manpage claims
+  this is currently the case.
+
+  In fact, our internal sockets interface (things like
+  open_socket_out(), etc) is much narrower than the getaddrinfo()
+  interface, and so probably simpler to get right.  In addition, the
+  old code is known to work well on old machines.
+
+  We could drop the rather large lib/getaddrinfo files.
+
+                      --          --
+
+
+Other IPv6 stuff
+  
+  Implement suggestions from http://www.kame.net/newsletter/19980604/
+  and ftp://ftp.iij.ad.jp/pub/RFC/rfc2553.txt
+
+  If a host has multiple addresses, then listen try to connect to all
+  in order until we get through.  (getaddrinfo may return multiple
+  addresses.)  This is kind of implemented already.
+
+  Possibly also when starting as a server we may need to listen on
+  multiple passive addresses.  This might be a bit harder, because we
+  may need to select on all of them.  Hm.
+
+                      --          --
+
+
+Add ACL support							2001/12/02
+
+  Transfer ACLs.  Need to think of a standard representation.
+  Probably better not to even try to convert between NT and POSIX.
+  Possibly can share some code with Samba.
+  NOTE: there is a patch that implements this in the "patches" subdir.
+
+                      --          --
+
+
+proxy authentication						2002/01/23
+
+  Allow RSYNC_PROXY to be http://user:pass@proxy.foo:3128/, and do
+  HTTP Basic Proxy-Authentication.
+
+  Multiple schemes are possible, up to and including the insanity that
+  is NTLM, but Basic probably covers most cases.
+
+                      --          --
+
+
+SOCKS								2002/01/23
+
+  Add --with-socks, and then perhaps a command-line option to put them
+  on or off.  This might be more reliable than LD_PRELOAD hacks.
+
+                      --          --
+
+
+FAT support
+
+  rsync to a FAT partition on a Unix machine doesn't work very well at
+  the moment.  I think we get errors about invalid filenames and
+  perhaps also trying to do atomic renames.
+
+  I guess the code to do this is currently #ifdef'd on Windows;
+  perhaps we ought to intelligently fall back to it on Unix too.
+
+                      --          --
+
+
+--diff						david.e.sewell	2002/03/15
+
+  Allow people to specify the diff command.  (Might want to use wdiff,
+  gnudiff, etc.)
+
+  Just diff the temporary file with the destination file, and delete
+  the tmp file rather than moving it into place.
+
+  Interaction with --partial.
+
+  Security interactions with daemon mode?
+
+                      --          --
+
+
+Add daemon --no-fork option
+
+  Very useful for debugging.  Also good when running under a
+  daemon-monitoring process that tries to restart the service when the
+  parent exits.
+
+                      --          --
+
+
+Create more granular verbosity					2003/05/15
+
+  Control output with the --report option.
+
+  The option takes as a single argument (no whitespace) a
+  comma delimited lists of keywords.
+
+  This would separate debugging from "logging" as well as
+  fine grained selection of statistical reporting and what
+  actions are logged.
+
+  http://lists.samba.org/archive/rsync/2003-May/006059.html
+
+                      --          --
+
+DOCUMENTATION --------------------------------------------------------
+
+
+Keep list of open issues and todos on the web site
+
+                      --          --
+
+
+Perhaps redo manual as SGML
+
+  The man page is getting rather large, and there is more information
+  that ought to be added.
+
+  TexInfo source is probably a dying format.
+
+  Linuxdoc looks like the most likely contender.  I know DocBook is
+  favoured by some people, but it's so bloody verbose, even with emacs
+  support.
+
+                      --          --
+
+LOGGING --------------------------------------------------------------
+
+
+Memory accounting
+
+  At exit, show how much memory was used for the file list, etc.
+
+  Also we do a wierd exponential-growth allocation in flist.c.  I'm
+  not sure this makes sense with modern mallocs.  At any rate it will
+  make us allocate a huge amount of memory for large file lists.
+
+                      --          --
+
+
+Improve error messages
+
+  If we hang or get SIGINT, then explain where we were up to.  Perhaps
+  have a static buffer that contains the current function name, or
+  some kind of description of what we were trying to do.  This is a
+  little easier on people than needing to run strace/truss.
+
+  "The dungeon collapses!  You are killed."  Rather than "unexpected
+  eof" give a message that is more detailed if possible and also more
+  helpful.
+
+  If we get an error writing to a socket, then we should perhaps
+  continue trying to read to see if an error message comes across
+  explaining why the socket is closed.  I'm not sure if this would
+  work, but it would certainly make our messages more helpful.
+
+  What happens if a directory is missing -x attributes.  Do we lose
+  our load?  (Debian #28416) Probably fixed now, but a test case would
+  be good.
+
+                      --          --
+
+
+Better statistics					Rasmus	2002/03/08
+
+  <Rasmus>
+      hey, how about an rsync option that just gives you the
+      summary without the list of files?  And perhaps gives
+      more information like the number of new files, number
+      of changed, deleted, etc. ?
+
+  <mbp>
+      nice idea there is --stats but at the moment it's very
+      tridge-oriented rather than user-friendly it would be
+      nice to improve it that would also work well with
+      --dryrun
+
+                      --          --
+
+
+Perhaps flush stdout like syslog
+
+  Perhaps flush stdout after each filename, so that people trying to
+  monitor progress in a log file can do so more easily.  See
+  http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=48108
+
+                      --          --
+
+
+Log child death on signal
+
+  If a child of the rsync daemon dies with a signal, we should notice
+  that when we reap it and log a message.
+
+                      --          --
+
+
+verbose output					David Stein	2001/12/20
+  
+  At end of transfer, show how many files were or were not transferred
+  correctly.
+
+                      --          --
+
+
+internationalization
+
+  Change to using gettext().  Probably need to ship this for platforms
+  that don't have it.
+
+  Solicit translations.
+
+  Does anyone care?  Before we bother modifying the code, we ought to
+  get the manual translated first, because that's possibly more useful
+  and at any rate demonstrates desire.
+
+                      --          --
+
+DEVELOPMENT --------------------------------------------------------
+
+Handling duplicate names
+
+  Some folks would like rsync to be deterministic in how it handles
+  duplicate names that come from mering multiple source directories
+  into a single destination directory; e.g. the last name wins.  We
+  could do this by switching our sort algorithm to one that will
+  guarantee that the names won't be reordered.  Alternately, we could
+  assign an ever-increasing number to each item as we insert it into
+  the list and then make sure that we leave the largest number when
+  cleaning the file list (see clean_flist()).  Another solution would
+  be to add a hash table, and thus never put any duplicate names into
+  the file list (and bump the protocol to handle this).
+
+                      --          --
+
+
+Use generic zlib						2002/02/25
+
+  Perhaps don't use our own zlib.
+
+  Advantages:
+   
+    - will automatically be up to date with bugfixes in zlib
+
+    - can leave it out for small rsync on e.g. recovery disks
+
+    - can use a shared library
+
+    - avoids people breaking rsync by trying to do this themselves and
+      messing up
+
+  Should we ship zlib for systems that don't have it, or require
+  people to install it separately?
+
+  Apparently this will make us incompatible with versions of rsync
+  that use the patched version of rsync.  Probably the simplest way to
+  do this is to just disable gzip (with a warning) when talking to old
+  versions.
+
+                      --          --
+
+
+Splint								2002/03/12
+
+  Build rsync with SPLINT to try to find security holes.  Add
+  annotations as necessary.  Keep track of the number of warnings
+  found initially, and see how many of them are real bugs, or real
+  security bugs.  Knowing the percentage of likely hits would be
+  really interesting for other projects.
+
+                      --          --
+
+PERFORMANCE ----------------------------------------------------------
+
+Allow skipping MD4 file_sum					2002/04/08
+
+  If we're doing a local transfer, or using -W, then perhaps don't
+  send the file checksum.  If we're doing a local transfer, then
+  calculating MD4 checksums uses 90% of CPU and is unlikely to be
+  useful.
+
+  We should not allow it to be disabled separately from -W, though
+  as it is the only thing that lets us know when the rsync algorithm
+  got out of sync and messed the file up (i.e. if the basis file
+  changed between checksum generation and reception).
+
+                      --          --
+
+
+Accelerate MD4
+
+  Perhaps borrow an assembler MD4 from someone?
+
+  Make sure we call MD4 with properly-sized blocks whenever possible
+  to avoid copying into the residue region?
+
+                      --          --
+
+TESTING --------------------------------------------------------------
+
+Torture test
+
+  Something that just keeps running rsync continuously over a data set
+  likely to generate problems.
+
+                      --          --
+
+
+Cross-test versions						2001/08/22
+
+  Part of the regression suite should be making sure that we
+  don't break backwards compatibility: old clients vs new
+  servers and so on.  Ideally we would test both up and down
+  from the current release to all old versions.
+
+  Run current rsync versions against significant past releases.
+
+  We might need to omit broken old versions, or versions in which
+  particular functionality is broken
+
+  It might be sufficient to test downloads from well-known public
+  rsync servers running different versions of rsync.  This will give
+  some testing and also be the most common case for having different
+  versions and not being able to upgrade.
+
+  The new --protocol option may help in this.
+
+                      --          --
+
+
+Test on kernel source
+
+  Download all versions of kernel; unpack, sync between them.  Also
+  sync between uncompressed tarballs.  Compare directories after
+  transfer.
+
+  Use local mode; ssh; daemon; --whole-file and --no-whole-file.
+
+  Use awk to pull out the 'speedup' number for each transfer.  Make
+  sure it is >= x.
+
+                      --          --
+
+
+Test large files
+
+  Sparse and non-sparse
+
+                      --          --
+
+
+Create mutator program for testing
+
+  Insert bytes, delete bytes, swap blocks, ...
+
+                      --          --
+
+
+Create configure option to enable dangerous tests
+
+                      --          --
+
+
+Create pipe program for testing
+
+  Create pipe program that makes slow/jerky connections for
+  testing Versions of read() and write() that corrupt the
+  stream, or abruptly fail
+
+                      --          --
+
+
+Create test makefile target for some tests
+
+  Separate makefile target to run rough tests -- or perhaps
+  just run them every time?
+
+                      --          --
+
+RELATED PROJECTS -----------------------------------------------------
+
+rsyncsh
+
+   Write a small emulation of interactive ftp as a Pythonn program
+   that calls rsync.  Commands such as "cd", "ls", "ls *.c" etc map
+   fairly directly into rsync commands: it just needs to remember the
+   current host, directory and so on.  We can probably even do
+   completion of remote filenames.
+
+                      --          --
+
+
+http://rsync.samba.org/rsync-and-debian/
+
+
+                      --          --
+
+
+rsyncable gzip patch
+
+  Exhaustive, tortuous testing
+
+  Cleanups?
+
+                      --          --
+
+
+rsyncsplit as alternative to real integration with gzip?
+
+                      --          --
+
+
+reverse rsync over HTTP Range
+
+  Goswin Brederlow suggested this on Debian; I think tridge and I
+  talked about it previous in relation to rproxy.
+
+  Addendum:  It looks like someone is working on a version of this:
+
+    http://zsync.moria.org.uk/
+
+                      --          --
+

access.c

@@ -1,82 +1,213 @@
-/* 
-   Copyright (C) Andrew Tridgell 1998
-   
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2 of the License, or
-   (at your option) any later version.
-   
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-   
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
 /*
-  hosts allow/deny code for rsync
-
-  */
+ * Routines to authenticate access to a daemon (hosts allow/deny).
+ *
+ * Copyright (C) 1998 Andrew Tridgell
+ * Copyright (C) 2004-2008 Wayne Davison
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, visit the http://fsf.org website.
+ */
 
 #include "rsync.h"
 
-
 static int match_hostname(char *host, char *tok)
 {
-	if (!host || !*host) return 0;
-	return (fnmatch(tok, host, 0) == 0);
+	if (!host || !*host)
+		return 0;
+	return wildmatch(tok, host);
 }
 
+static int match_binary(char *b1, char *b2, char *mask, int addrlen)
+{
+	int i;
+
+	for (i = 0; i < addrlen; i++) {
+		if ((b1[i] ^ b2[i]) & mask[i])
+			return 0;
+	}
+
+	return 1;
+}
+
+static void make_mask(char *mask, int plen, int addrlen)
+{
+	int w, b;
+
+	w = plen >> 3;
+	b = plen & 0x7;
+
+	if (w)
+		memset(mask, 0xff, w);
+	if (w < addrlen)
+		mask[w] = 0xff & (0xff<<(8-b));
+	if (w+1 < addrlen)
+		memset(mask+w+1, 0, addrlen-w-1);
+
+	return;
+}
 
 static int match_address(char *addr, char *tok)
 {
 	char *p;
-	unsigned long a, t, mask = (unsigned long)~0;
+	struct addrinfo hints, *resa, *rest;
+	int gai;
+	int ret = 0;
+	int addrlen = 0;
+#ifdef HAVE_STRTOL
+	long int bits;
+#else
+	int bits;
+#endif
+	char mask[16];
+	char *a = NULL, *t = NULL;
+	unsigned int len;
 
-	if (!addr || !*addr) return 0;
-
-	if (!isdigit(tok[0])) return 0;
+	if (!addr || !*addr)
+		return 0;
 
 	p = strchr(tok,'/');
-	if (p) *p = 0;
-
-	a = inet_addr(addr);
-	t = inet_addr(tok);
-
 	if (p) {
-		*p = '/';
-	}
+		*p = '\0';
+		len = p - tok;
+	} else
+		len = strlen(tok);
 
-	if (t == INADDR_NONE) {
-		rprintf(FERROR,"malformed address %s\n", tok);
+	/* Fail quietly if tok is a hostname (not an address) */
+	if (strspn(tok, ".0123456789") != len
+#ifdef INET6
+	    && strchr(tok, ':') == NULL
+#endif
+	) {
+		if (p)
+			*p = '/';
 		return 0;
 	}
 
-	a = ntohl(a);
-	t = ntohl(t);
+	memset(&hints, 0, sizeof(hints));
+	hints.ai_family = PF_UNSPEC;
+	hints.ai_socktype = SOCK_STREAM;
+#ifdef AI_NUMERICHOST
+	hints.ai_flags = AI_NUMERICHOST;
+#endif
 
-	if (p) {
-		if (strchr(p+1,'.')) {
-			mask = inet_addr(p+1);
-			if (mask == INADDR_NONE) {
-				rprintf(FERROR,"malformed mask in %s\n", tok);
-				return 0;
-			}
-			mask = ntohl(mask);
-		} else {
-			int bits = atoi(p+1);
-			if (bits <= 0 || bits > 32) {
-				rprintf(FERROR,"malformed mask in %s\n", tok);
-				return 0;
-			}
-			mask &= (mask << (32-bits));
-		}
+	if (getaddrinfo(addr, NULL, &hints, &resa) != 0) {
+		if (p)
+			*p = '/';
+		return 0;
 	}
 
-	return ((a&mask) == (t&mask));
+	gai = getaddrinfo(tok, NULL, &hints, &rest);
+	if (p)
+		*p++ = '/';
+	if (gai != 0) {
+		rprintf(FLOG, "error matching address %s: %s\n",
+			tok, gai_strerror(gai));
+		freeaddrinfo(resa);
+		return 0;
+	}
+
+	if (rest->ai_family != resa->ai_family) {
+		ret = 0;
+		goto out;
+	}
+
+	switch(resa->ai_family) {
+	case PF_INET:
+		a = (char *)&((struct sockaddr_in *)resa->ai_addr)->sin_addr;
+		t = (char *)&((struct sockaddr_in *)rest->ai_addr)->sin_addr;
+		addrlen = 4;
+
+		break;
+
+#ifdef INET6
+	case PF_INET6:
+	    {
+		struct sockaddr_in6 *sin6a, *sin6t;
+
+		sin6a = (struct sockaddr_in6 *)resa->ai_addr;
+		sin6t = (struct sockaddr_in6 *)rest->ai_addr;
+
+		a = (char *)&sin6a->sin6_addr;
+		t = (char *)&sin6t->sin6_addr;
+
+		addrlen = 16;
+
+#ifdef HAVE_SOCKADDR_IN6_SCOPE_ID
+		if (sin6t->sin6_scope_id &&
+		    sin6a->sin6_scope_id != sin6t->sin6_scope_id) {
+			ret = 0;
+			goto out;
+		}
+#endif
+
+		break;
+	    }
+#endif
+	default:
+	    rprintf(FLOG, "unknown family %u\n", rest->ai_family);
+	    ret = 0;
+	    goto out;
+	}
+
+	bits = -1;
+	if (p) {
+		if (inet_pton(resa->ai_addr->sa_family, p, mask) <= 0) {
+#ifdef HAVE_STRTOL
+			char *ep = NULL;
+#else
+			unsigned char *pp;
+#endif
+
+#ifdef HAVE_STRTOL
+			bits = strtol(p, &ep, 10);
+			if (!*p || *ep) {
+				rprintf(FLOG, "malformed mask in %s\n", tok);
+				ret = 0;
+				goto out;
+			}
+#else
+			for (pp = (unsigned char *)p; *pp; pp++) {
+				if (!isascii(*pp) || !isdigit(*pp)) {
+					rprintf(FLOG, "malformed mask in %s\n", tok);
+					ret = 0;
+					goto out;
+				}
+			}
+			bits = atoi(p);
+#endif
+			if (bits == 0) {
+				ret = 1;
+				goto out;
+			}
+			if (bits < 0 || bits > (addrlen << 3)) {
+				rprintf(FLOG, "malformed mask in %s\n", tok);
+				ret = 0;
+				goto out;
+			}
+		}
+	} else {
+		bits = 128;
+	}
+
+	if (bits >= 0)
+		make_mask(mask, bits, addrlen);
+
+	ret = match_binary(a, t, mask, addrlen);
+
+  out:
+	freeaddrinfo(resa);
+	freeaddrinfo(rest);
+	return ret;
 }
 
 static int access_match(char *list, char *addr, char *host)
@@ -84,12 +215,14 @@ static int access_match(char *list, char *addr, char *host)
 	char *tok;
 	char *list2 = strdup(list);
 
-	if (!list2) out_of_memory("access_match");
+	if (!list2)
+		out_of_memory("access_match");
 
 	strlower(list2);
-	if (host) strlower(host);
+	if (host)
+		strlower(host);
 
-	for (tok=strtok(list2," ,\t"); tok; tok=strtok(NULL," ,\t")) {
+	for (tok = strtok(list2, " ,\t"); tok; tok = strtok(NULL, " ,\t")) {
 		if (match_hostname(host, tok) || match_address(addr, tok)) {
 			free(list2);
 			return 1;
@@ -102,29 +235,25 @@ static int access_match(char *list, char *addr, char *host)
 
 int allow_access(char *addr, char *host, char *allow_list, char *deny_list)
 {
-	/* if theres no deny list and no allow list then allow access */
-	if ((!deny_list || !*deny_list) && (!allow_list || !*allow_list))
-		return 1;
+	if (allow_list && !*allow_list)
+		allow_list = NULL;
+	if (deny_list && !*deny_list)
+		deny_list = NULL;
 
-	/* if there is an allow list but no deny list then allow only hosts
-	   on the allow list */
-	if (!deny_list || !*deny_list)
-		return(access_match(allow_list, addr, host));
+	/* If we match an allow-list item, we always allow access. */
+	if (allow_list) {
+		if (access_match(allow_list, addr, host))
+			return 1;
+		/* For an allow-list w/o a deny-list, disallow non-matches. */
+		if (!deny_list)
+			return 0;
+	}
 
-	/* if theres a deny list but no allow list then allow
-	   all hosts not on the deny list */
-	if (!allow_list || !*allow_list)
-		return(!access_match(deny_list,addr,host));
-
-	/* if there are both type of list then allow all hosts on the
-           allow list */
-	if (access_match(allow_list,addr,host))
-		return 1;
-
-	/* if there are both type of list and it's not on the allow then
-	   allow it if its not on the deny */
-	if (access_match(deny_list,addr,host))
+	/* If we match a deny-list item (and got past any allow-list
+	 * items), we always disallow access. */
+	if (deny_list && access_match(deny_list, addr, host))
 		return 0;
 
+	/* Allow all other access. */
 	return 1;
 }

acconfig.h

@@ -1,12 +0,0 @@
-#undef HAVE_BROKEN_READDIR
-#undef HAVE_ERRNO_DECL
-#undef HAVE_LONGLONG
-#undef HAVE_OFF64_T
-#undef HAVE_REMSH
-#undef HAVE_UNSIGNED_CHAR
-#undef HAVE_UTIMBUF
-#undef ino_t
-#undef HAVE_CONNECT
-#undef HAVE_SHORT_INO_T
-#undef HAVE_GETOPT_LONG
-#undef REPLACE_INET_NTOA

aclocal.m4

@@ -21,3 +21,72 @@ AC_DEFUN(AC_VALIDATE_CACHE_SYSTEM_TYPE, [
     ac_cv_build_system_type="$build"
     ac_cv_target_system_type="$target"
 ])
+
+dnl Check for socklen_t: historically on BSD it is an int, and in
+dnl POSIX 1g it is a type of its own, but some platforms use different
+dnl types for the argument to getsockopt, getpeername, etc.  So we
+dnl have to test to find something that will work.
+
+dnl This is no good, because passing the wrong pointer on C compilers is
+dnl likely to only generate a warning, not an error.  We don't call this at
+dnl the moment.
+
+AC_DEFUN([TYPE_SOCKLEN_T],
+[
+   AC_CHECK_TYPE([socklen_t], ,[
+      AC_MSG_CHECKING([for socklen_t equivalent])
+      AC_CACHE_VAL([rsync_cv_socklen_t_equiv],
+      [
+         # Systems have either "struct sockaddr *" or
+         # "void *" as the second argument to getpeername
+         rsync_cv_socklen_t_equiv=
+         for arg2 in "struct sockaddr" void; do
+            for t in int size_t unsigned long "unsigned long"; do
+               AC_TRY_COMPILE([
+#include <sys/types.h>
+#include <sys/socket.h>
+
+                  int getpeername (int, $arg2 *, $t *);
+               ],[
+                  $t len;
+                  getpeername(0,0,&len);
+               ],[
+                  rsync_cv_socklen_t_equiv="$t"
+                  break
+               ])
+            done
+         done
+
+         if test "x$rsync_cv_socklen_t_equiv" = x; then
+            AC_MSG_ERROR([Cannot find a type to use in place of socklen_t])
+         fi
+      ])
+      AC_MSG_RESULT($rsync_cv_socklen_t_equiv)
+      AC_DEFINE_UNQUOTED(socklen_t, $rsync_cv_socklen_t_equiv,
+			[type to use in place of socklen_t if not defined])],
+      [#include <sys/types.h>
+#include <sys/socket.h>])
+])
+
+dnl AC_HAVE_TYPE(TYPE,INCLUDES)
+AC_DEFUN([AC_HAVE_TYPE], [
+AC_REQUIRE([AC_HEADER_STDC])
+cv=`echo "$1" | sed 'y%./+- %__p__%'`
+AC_MSG_CHECKING(for $1)
+AC_CACHE_VAL([ac_cv_type_$cv],
+AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
+AC_INCLUDES_DEFAULT
+$2]],
+[[$1 foo;]])],
+[eval "ac_cv_type_$cv=yes"],
+[eval "ac_cv_type_$cv=no"]))dnl
+ac_foo=`eval echo \\$ac_cv_type_$cv`
+AC_MSG_RESULT($ac_foo)
+if test "$ac_foo" = yes; then
+  ac_tr_hdr=HAVE_`echo $1 | sed 'y%abcdefghijklmnopqrstuvwxyz./- %ABCDEFGHIJKLMNOPQRSTUVWXYZ____%'`
+if false; then
+	AC_CHECK_TYPES($1)
+fi
+  AC_DEFINE_UNQUOTED($ac_tr_hdr, 1, [Define if you have type `$1'])
+fi
+])

authenticate.c

@@ -1,38 +1,39 @@
-/* 
-   Copyright (C) Andrew Tridgell 1998
-   
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2 of the License, or
-   (at your option) any later version.
-   
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-   
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
+/*
+ * Support rsync daemon authentication.
+ *
+ * Copyright (C) 1998-2000 Andrew Tridgell
+ * Copyright (C) 2002-2008 Wayne Davison
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, visit the http://fsf.org website.
+ */
 
-/* support rsync authentication */
 #include "rsync.h"
 
+extern char *password_file;
+
 /***************************************************************************
 encode a buffer using base64 - simple and slow algorithm. null terminates
 the result.
   ***************************************************************************/
-static void base64_encode(char *buf, int len, char *out)
+void base64_encode(const char *buf, int len, char *out, int pad)
 {
 	char *b64 = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/";
 	int bit_offset, byte_offset, idx, i;
-	unsigned char *d = (unsigned char *)buf;
+	const uchar *d = (const uchar *)buf;
 	int bytes = (len*8 + 5)/6;
 
-	memset(out, 0, bytes+1);
-
-	for (i=0;i<bytes;i++) {
+	for (i = 0; i < bytes; i++) {
 		byte_offset = (i*6)/8;
 		bit_offset = (i*6)%8;
 		if (bit_offset < 3) {
@@ -45,242 +46,270 @@ static void base64_encode(char *buf, int len, char *out)
 		}
 		out[i] = b64[idx];
 	}
+
+	while (pad && (i % 4))
+		out[i++] = '=';
+
+	out[i] = '\0';
 }
 
-/* create a 16 byte challenge buffer */
-static void gen_challenge(char *addr, char *challenge)
+/* Generate a challenge buffer and return it base64-encoded. */
+static void gen_challenge(const char *addr, char *challenge)
 {
 	char input[32];
+	char digest[MAX_DIGEST_LEN];
 	struct timeval tv;
+	int len;
 
-	memset(input, 0, sizeof(input));
+	memset(input, 0, sizeof input);
 
-	strlcpy((char *)input, addr, 17);
-	gettimeofday(&tv, NULL);
+	strlcpy(input, addr, 17);
+	sys_gettimeofday(&tv);
 	SIVAL(input, 16, tv.tv_sec);
 	SIVAL(input, 20, tv.tv_usec);
 	SIVAL(input, 24, getpid());
 
-	sum_init();
-	sum_update(input, sizeof(input));
-	sum_end(challenge);
+	sum_init(0);
+	sum_update(input, sizeof input);
+	len = sum_end(digest);
+
+	base64_encode(digest, len, challenge, 0);
 }
 
 
-/* return the secret for a user from the sercret file. maximum length
-   is len. null terminate it */
-static int get_secret(int module, char *user, char *secret, int len)
+/* Return the secret for a user from the secret file, null terminated.
+ * Maximum length is len (not counting the null). */
+static int get_secret(int module, const char *user, char *secret, int len)
 {
-	char *fname = lp_secrets_file(module);
-	int fd, found=0;
-	char line[MAXPATHLEN];
-	char *p, *pass=NULL;
+	const char *fname = lp_secrets_file(module);
 	STRUCT_STAT st;
-	int ok = 1;
-	extern int am_root;
+	int fd, ok = 1;
+	const char *p;
+	char ch, *s;
 
-	if (!fname || !*fname) return 0;
+	if (!fname || !*fname)
+		return 0;
 
-	fd = open(fname,O_RDONLY);
-	if (fd == -1) return 0;
+	if ((fd = open(fname, O_RDONLY)) < 0)
+		return 0;
 
 	if (do_stat(fname, &st) == -1) {
-		rprintf(FERROR,"stat(%s) : %s\n", fname, strerror(errno));
+		rsyserr(FLOG, errno, "stat(%s)", fname);
 		ok = 0;
 	} else if (lp_strict_modes(module)) {
 		if ((st.st_mode & 06) != 0) {
-			rprintf(FERROR,"secrets file must not be other-accessible (see strict modes option)\n");
+			rprintf(FLOG, "secrets file must not be other-accessible (see strict modes option)\n");
 			ok = 0;
-		} else if (am_root && (st.st_uid != 0)) {
-			rprintf(FERROR,"secrets file must be owned by root when running as root (see strict modes)\n");
+		} else if (MY_UID() == 0 && st.st_uid != 0) {
+			rprintf(FLOG, "secrets file must be owned by root when running as root (see strict modes)\n");
 			ok = 0;
 		}
 	}
 	if (!ok) {
-		rprintf(FERROR,"continuing without secrets file\n");
+		rprintf(FLOG, "continuing without secrets file\n");
 		close(fd);
 		return 0;
 	}
 
-	while (!found) {
-		int i = 0;
-		memset(line, 0, sizeof(line));
-		while (i<(sizeof(line)-1)) {
-			if (read(fd, &line[i], 1) != 1) {
-				memset(line, 0, sizeof(line));
-				close(fd);
-				return 0;
-			}
-			if (line[i] == '\r') continue;
-			if (line[i] == '\n') break;
-			i++;
-		}
-		line[i] = 0;
-		if (line[0] == '#') continue;
-		p = strchr(line,':');
-		if (!p) continue;
-		*p = 0;
-		if (strcmp(user, line)) continue;
-		pass = p+1;
-		found = 1;
+	if (*user == '#') {
+		/* Reject attempt to match a comment. */
+		close(fd);
+		return 0;
 	}
 
-	close(fd);
-	if (!found) return 0;
+	/* Try to find a line that starts with the user name and a ':'. */
+	p = user;
+	while (1) {
+		if (read(fd, &ch, 1) != 1) {
+			close(fd);
+			return 0;
+		}
+		if (ch == '\n')
+			p = user;
+		else if (p) {
+			if (*p == ch)
+				p++;
+			else if (!*p && ch == ':')
+				break;
+			else
+				p = NULL;
+		}
+	}
+
+	/* Slurp the secret into the "secret" buffer. */
+	s = secret;
+	while (len > 0) {
+		if (read(fd, s, 1) != 1 || *s == '\n')
+			break;
+		if (*s == '\r')
+			continue;
+		s++;
+		len--;
+	}
+	*s = '\0';
+	close(fd);
 
-	strlcpy(secret, pass, len);
 	return 1;
 }
 
-static char *getpassf(char *filename)
+static const char *getpassf(const char *filename)
 {
-	char buffer[100];
-	int len=0;
-	int fd=0;
 	STRUCT_STAT st;
-	int ok = 1;
-	extern int am_root;
-	char *envpw=getenv("RSYNC_PASSWORD");
+	char buffer[512], *p;
+	int fd, n, ok = 1;
+	const char *envpw = getenv("RSYNC_PASSWORD");
 
-	if (!filename) return NULL;
+	if (!filename)
+		return NULL;
 
-	if ( (fd=open(filename,O_RDONLY)) == -1) {
-		rprintf(FERROR,"could not open password file \"%s\"\n",filename);
-		if (envpw) rprintf(FERROR,"falling back to RSYNC_PASSWORD environment variable.\n");	
+	if ((fd = open(filename,O_RDONLY)) < 0) {
+		rsyserr(FWARNING, errno, "could not open password file \"%s\"",
+			filename);
+		if (envpw)
+			rprintf(FINFO, "falling back to RSYNC_PASSWORD environment variable.\n");
 		return NULL;
 	}
-	
+
 	if (do_stat(filename, &st) == -1) {
-		rprintf(FERROR,"stat(%s) : %s\n", filename, strerror(errno));
+		rsyserr(FWARNING, errno, "stat(%s)", filename);
 		ok = 0;
 	} else if ((st.st_mode & 06) != 0) {
-		rprintf(FERROR,"password file must not be other-accessible\n");
+		rprintf(FWARNING, "password file must not be other-accessible\n");
 		ok = 0;
-	} else if (am_root && (st.st_uid != 0)) {
-		rprintf(FERROR,"password file must be owned by root when running as root\n");
+	} else if (MY_UID() == 0 && st.st_uid != 0) {
+		rprintf(FWARNING, "password file must be owned by root when running as root\n");
 		ok = 0;
 	}
 	if (!ok) {
-		rprintf(FERROR,"continuing without password file\n");
-		if (envpw) rprintf(FERROR,"using RSYNC_PASSWORD environment variable.\n");
 		close(fd);
+		rprintf(FWARNING, "continuing without password file\n");
+		if (envpw)
+			rprintf(FINFO, "falling back to RSYNC_PASSWORD environment variable.\n");
 		return NULL;
 	}
 
-	if (envpw) rprintf(FERROR,"RSYNC_PASSWORD environment variable ignored\n");
-
-	buffer[sizeof(buffer)-1]='\0';
-	if ( (len=read(fd,buffer,sizeof(buffer)-1)) > 0)
-	{
-		char *p = strtok(buffer,"\n\r");
-		close(fd);
-		if (p) p = strdup(p);
-		return p;
-	}	
+	n = read(fd, buffer, sizeof buffer - 1);
+	close(fd);
+	if (n > 0) {
+		buffer[n] = '\0';
+		if ((p = strtok(buffer, "\n\r")) != NULL)
+			return strdup(p);
+	}
 
 	return NULL;
 }
 
-/* generate a 16 byte hash from a password and challenge */
-static void generate_hash(char *in, char *challenge, char *out)
+/* Generate an MD4 hash created from the combination of the password
+ * and the challenge string and return it base64-encoded. */
+static void generate_hash(const char *in, const char *challenge, char *out)
 {
-	char buf[16];
+	char buf[MAX_DIGEST_LEN];
+	int len;
 
-	sum_init();
+	sum_init(0);
 	sum_update(in, strlen(in));
 	sum_update(challenge, strlen(challenge));
-	sum_end(buf);
+	len = sum_end(buf);
 
-	base64_encode(buf, 16, out);
+	base64_encode(buf, len, out, 0);
 }
 
-/* possible negotiate authentication with the client. Use "leader" to
-   start off the auth if necessary 
-
-   return NULL if authentication failed
-
-   return "" if anonymous access
-
-   otherwise return username
-*/
-char *auth_server(int fd, int module, char *addr, char *leader)
+/* Possibly negotiate authentication with the client.  Use "leader" to
+ * start off the auth if necessary.
+ *
+ * Return NULL if authentication failed.  Return "" if anonymous access.
+ * Otherwise return username.
+ */
+char *auth_server(int f_in, int f_out, int module, const char *host,
+		  const char *addr, const char *leader)
 {
 	char *users = lp_auth_users(module);
-	char challenge[16];
-	char b64_challenge[30];
-	char line[MAXPATHLEN];
-	static char user[100];
-	char secret[100];
-	char pass[30];
-	char pass2[30];
-	char *tok;
+	char challenge[MAX_DIGEST_LEN*2];
+	char line[BIGPATHBUFLEN];
+	char secret[512];
+	char pass2[MAX_DIGEST_LEN*2];
+	char *tok, *pass;
 
 	/* if no auth list then allow anyone in! */
-	if (!users || !*users) return "";
+	if (!users || !*users)
+		return "";
 
 	gen_challenge(addr, challenge);
-	
-	base64_encode(challenge, 16, b64_challenge);
 
-	io_printf(fd,"%s%s\n", leader, b64_challenge);
+	io_printf(f_out, "%s%s\n", leader, challenge);
 
-	if (!read_line(fd, line, sizeof(line)-1)) {
+	if (!read_line_old(f_in, line, sizeof line)
+	 || (pass = strchr(line, ' ')) == NULL) {
+		rprintf(FLOG, "auth failed on module %s from %s (%s): "
+			"invalid challenge response\n",
+			lp_name(module), host, addr);
 		return NULL;
 	}
+	*pass++ = '\0';
 
-	memset(user, 0, sizeof(user));
-	memset(pass, 0, sizeof(pass));
+	if (!(users = strdup(users)))
+		out_of_memory("auth_server");
 
-	if (sscanf(line,"%99s %29s", user, pass) != 2) {
-		return NULL;
-	}
-
-	users = strdup(users);
-	if (!users) return NULL;
-
-	for (tok=strtok(users," ,\t"); tok; tok = strtok(NULL," ,\t")) {
-		if (strcmp(tok, user) == 0) break;
+	for (tok = strtok(users, " ,\t"); tok; tok = strtok(NULL, " ,\t")) {
+		if (wildmatch(tok, line))
+			break;
 	}
 	free(users);
 
 	if (!tok) {
-		return NULL;
-	}
-	
-	memset(secret, 0, sizeof(secret));
-	if (!get_secret(module, user, secret, sizeof(secret)-1)) {
-		memset(secret, 0, sizeof(secret));
+		rprintf(FLOG, "auth failed on module %s from %s (%s): "
+			"unauthorized user\n",
+			lp_name(module), host, addr);
 		return NULL;
 	}
 
-	generate_hash(secret, b64_challenge, pass2);
-	memset(secret, 0, sizeof(secret));
-	
-	if (strcmp(pass, pass2) == 0)
-		return user;
+	memset(secret, 0, sizeof secret);
+	if (!get_secret(module, line, secret, sizeof secret - 1)) {
+		memset(secret, 0, sizeof secret);
+		rprintf(FLOG, "auth failed on module %s from %s (%s): "
+			"missing secret for user \"%s\"\n",
+			lp_name(module), host, addr, line);
+		return NULL;
+	}
 
-	return NULL;
+	generate_hash(secret, challenge, pass2);
+	memset(secret, 0, sizeof secret);
+
+	if (strcmp(pass, pass2) != 0) {
+		rprintf(FLOG, "auth failed on module %s from %s (%s): "
+			"password mismatch\n",
+			lp_name(module), host, addr);
+		return NULL;
+	}
+
+	return strdup(line);
 }
 
-
-void auth_client(int fd, char *user, char *challenge)
+void auth_client(int fd, const char *user, const char *challenge)
 {
-	char *pass;
-	char pass2[30];
-	extern char *password_file;
+	const char *pass;
+	char pass2[MAX_DIGEST_LEN*2];
 
-	if (!user || !*user) return;
+	if (!user || !*user)
+		user = "nobody";
 
-	if (!(pass=getpassf(password_file)) && !(pass=getenv("RSYNC_PASSWORD"))) {
+	if (!(pass = getpassf(password_file))
+	 && !(pass = getenv("RSYNC_PASSWORD"))) {
+		/* XXX: cyeoh says that getpass is deprecated, because
+		 * it may return a truncated password on some systems,
+		 * and it is not in the LSB.
+                 *
+                 * Andrew Klein says that getpassphrase() is present
+                 * on Solaris and reads up to 256 characters.
+                 *
+                 * OpenBSD has a readpassphrase() that might be more suitable.
+                 */
 		pass = getpass("Password: ");
 	}
 
-	if (!pass || !*pass) {
+	if (!pass)
 		pass = "";
-	}
 
 	generate_hash(pass, challenge, pass2);
 	io_printf(fd, "%s %s\n", user, pass2);
 }
-
-

backup.c

@@ -0,0 +1,328 @@
+/*
+ * Backup handling code.
+ *
+ * Copyright (C) 1999 Andrew Tridgell
+ * Copyright (C) 2003-2008 Wayne Davison
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, visit the http://fsf.org website.
+ */
+
+#include "rsync.h"
+
+extern int verbose;
+extern int am_root;
+extern int preserve_acls;
+extern int preserve_xattrs;
+extern int preserve_devices;
+extern int preserve_specials;
+extern int preserve_links;
+extern int safe_symlinks;
+extern int backup_dir_len;
+extern unsigned int backup_dir_remainder;
+extern char backup_dir_buf[MAXPATHLEN];
+extern char *backup_suffix;
+extern char *backup_dir;
+
+/* make a complete pathname for backup file */
+char *get_backup_name(const char *fname)
+{
+	if (backup_dir) {
+		if (stringjoin(backup_dir_buf + backup_dir_len, backup_dir_remainder,
+			       fname, backup_suffix, NULL) < backup_dir_remainder)
+			return backup_dir_buf;
+	} else {
+		if (stringjoin(backup_dir_buf, MAXPATHLEN,
+			       fname, backup_suffix, NULL) < MAXPATHLEN)
+			return backup_dir_buf;
+	}
+
+	rprintf(FERROR, "backup filename too long\n");
+	return NULL;
+}
+
+/* simple backup creates a backup with a suffix in the same directory */
+static int make_simple_backup(const char *fname)
+{
+	int rename_errno;
+	const char *fnamebak = get_backup_name(fname);
+
+	if (!fnamebak)
+		return 0;
+
+	while (1) {
+		if (do_rename(fname, fnamebak) == 0) {
+			if (verbose > 1) {
+				rprintf(FINFO, "backed up %s to %s\n",
+					fname, fnamebak);
+			}
+			break;
+		}
+		/* cygwin (at least version b19) reports EINVAL */
+		if (errno == ENOENT || errno == EINVAL)
+			break;
+
+		rename_errno = errno;
+		if (errno == EISDIR && do_rmdir(fnamebak) == 0)
+			continue;
+		if (errno == ENOTDIR && do_unlink(fnamebak) == 0)
+			continue;
+
+		rsyserr(FERROR, rename_errno, "rename %s to backup %s",
+			fname, fnamebak);
+		errno = rename_errno;
+		return 0;
+	}
+
+	return 1;
+}
+
+
+/****************************************************************************
+Create a directory given an absolute path, perms based upon another directory
+path
+****************************************************************************/
+int make_bak_dir(const char *fullpath)
+{
+	char fbuf[MAXPATHLEN], *rel, *end, *p;
+	struct file_struct *file;
+	int len = backup_dir_len;
+	stat_x sx;
+
+	while (*fullpath == '.' && fullpath[1] == '/') {
+		fullpath += 2;
+		len -= 2;
+	}
+
+	if (strlcpy(fbuf, fullpath, sizeof fbuf) >= sizeof fbuf)
+		return -1;
+
+	rel = fbuf + len;
+	end = p = rel + strlen(rel);
+
+	/* Try to find an existing dir, starting from the deepest dir. */
+	while (1) {
+		if (--p == fbuf)
+			return -1;
+		if (*p == '/') {
+			*p = '\0';
+			if (mkdir_defmode(fbuf) == 0)
+				break;
+			if (errno != ENOENT) {
+				rsyserr(FERROR, errno,
+					"make_bak_dir mkdir %s failed",
+					full_fname(fbuf));
+				return -1;
+			}
+		}
+	}
+
+	/* Make all the dirs that we didn't find on the way here. */
+	while (1) {
+		if (p >= rel) {
+			/* Try to transfer the directory settings of the
+			 * actual dir that the files are coming from. */
+			if (x_stat(rel, &sx.st, NULL) < 0) {
+				rsyserr(FERROR, errno,
+					"make_bak_dir stat %s failed",
+					full_fname(rel));
+			} else {
+#ifdef SUPPORT_ACLS
+				sx.acc_acl = sx.def_acl = NULL;
+#endif
+#ifdef SUPPORT_XATTRS
+				sx.xattr = NULL;
+#endif
+				if (!(file = make_file(rel, NULL, NULL, 0, NO_FILTERS)))
+					continue;
+#ifdef SUPPORT_ACLS
+				if (preserve_acls && !S_ISLNK(file->mode)) {
+					get_acl(rel, &sx);
+					cache_acl(file, &sx);
+					free_acl(&sx);
+				}
+#endif
+#ifdef SUPPORT_XATTRS
+				if (preserve_xattrs) {
+					get_xattr(rel, &sx);
+					cache_xattr(file, &sx);
+					free_xattr(&sx);
+				}
+#endif
+				set_file_attrs(fbuf, file, NULL, NULL, 0);
+				unmake_file(file);
+			}
+		}
+		*p = '/';
+		p += strlen(p);
+		if (p == end)
+			break;
+		if (mkdir_defmode(fbuf) < 0) {
+			rsyserr(FERROR, errno, "make_bak_dir mkdir %s failed",
+				full_fname(fbuf));
+			return -1;
+		}
+	}
+
+	return 0;
+}
+
+/* robustly move a file, creating new directory structures if necessary */
+static int robust_move(const char *src, char *dst)
+{
+	if (robust_rename(src, dst, NULL, 0755) < 0
+	 && (errno != ENOENT || make_bak_dir(dst) < 0
+	  || robust_rename(src, dst, NULL, 0755) < 0))
+		return -1;
+	return 0;
+}
+
+
+/* If we have a --backup-dir, then we get here from make_backup().
+ * We will move the file to be deleted into a parallel directory tree. */
+static int keep_backup(const char *fname)
+{
+	stat_x sx;
+	struct file_struct *file;
+	char *buf;
+	int kept = 0;
+	int ret_code;
+
+	/* return if no file to keep */
+	if (x_lstat(fname, &sx.st, NULL) < 0)
+		return 1;
+#ifdef SUPPORT_ACLS
+	sx.acc_acl = sx.def_acl = NULL;
+#endif
+#ifdef SUPPORT_XATTRS
+	sx.xattr = NULL;
+#endif
+
+	if (!(file = make_file(fname, NULL, NULL, 0, NO_FILTERS)))
+		return 1; /* the file could have disappeared */
+
+	if (!(buf = get_backup_name(fname))) {
+		unmake_file(file);
+		return 0;
+	}
+
+#ifdef SUPPORT_ACLS
+	if (preserve_acls && !S_ISLNK(file->mode)) {
+		get_acl(fname, &sx);
+		cache_acl(file, &sx);
+		free_acl(&sx);
+	}
+#endif
+#ifdef SUPPORT_XATTRS
+	if (preserve_xattrs) {
+		get_xattr(fname, &sx);
+		cache_xattr(file, &sx);
+		free_xattr(&sx);
+	}
+#endif
+
+	/* Check to see if this is a device file, or link */
+	if ((am_root && preserve_devices && IS_DEVICE(file->mode))
+	 || (preserve_specials && IS_SPECIAL(file->mode))) {
+		uint32 *devp = F_RDEV_P(file);
+		dev_t rdev = MAKEDEV(DEV_MAJOR(devp), DEV_MINOR(devp));
+		do_unlink(buf);
+		if (do_mknod(buf, file->mode, rdev) < 0
+		    && (errno != ENOENT || make_bak_dir(buf) < 0
+		     || do_mknod(buf, file->mode, rdev) < 0)) {
+			rsyserr(FERROR, errno, "mknod %s failed",
+				full_fname(buf));
+		} else if (verbose > 2) {
+			rprintf(FINFO, "make_backup: DEVICE %s successful.\n",
+				fname);
+		}
+		kept = 1;
+		do_unlink(fname);
+	}
+
+	if (!kept && S_ISDIR(file->mode)) {
+		/* make an empty directory */
+		if (do_mkdir(buf, file->mode) < 0
+		    && (errno != ENOENT || make_bak_dir(buf) < 0
+		     || do_mkdir(buf, file->mode) < 0)) {
+			rsyserr(FINFO, errno, "mkdir %s failed",
+				full_fname(buf));
+		}
+
+		ret_code = do_rmdir(fname);
+		if (verbose > 2) {
+			rprintf(FINFO, "make_backup: RMDIR %s returns %i\n",
+				full_fname(fname), ret_code);
+		}
+		kept = 1;
+	}
+
+#ifdef SUPPORT_LINKS
+	if (!kept && preserve_links && S_ISLNK(file->mode)) {
+		const char *sl = F_SYMLINK(file);
+		if (safe_symlinks && unsafe_symlink(sl, buf)) {
+			if (verbose) {
+				rprintf(FINFO, "ignoring unsafe symlink %s -> %s\n",
+					full_fname(buf), sl);
+			}
+			kept = 1;
+		} else {
+			do_unlink(buf);
+			if (do_symlink(sl, buf) < 0
+			    && (errno != ENOENT || make_bak_dir(buf) < 0
+			     || do_symlink(sl, buf) < 0)) {
+				rsyserr(FERROR, errno, "link %s -> \"%s\"",
+					full_fname(buf), sl);
+			}
+			do_unlink(fname);
+			kept = 1;
+		}
+	}
+#endif
+
+	if (!kept && !S_ISREG(file->mode)) {
+		rprintf(FINFO, "make_bak: skipping non-regular file %s\n",
+			fname);
+		unmake_file(file);
+		return 1;
+	}
+
+	/* move to keep tree if a file */
+	if (!kept) {
+		if (robust_move(fname, buf) != 0) {
+			rsyserr(FERROR, errno, "keep_backup failed: %s -> \"%s\"",
+				full_fname(fname), buf);
+		} else if (sx.st.st_nlink > 1) {
+			/* If someone has hard-linked the file into the backup
+			 * dir, rename() might return success but do nothing! */
+			robust_unlink(fname); /* Just in case... */
+		}
+	}
+	set_file_attrs(buf, file, NULL, fname, 0);
+	unmake_file(file);
+
+	if (verbose > 1) {
+		rprintf(FINFO, "backed up %s to %s\n",
+			fname, buf);
+	}
+	return 1;
+}
+
+
+/* main backup switch routine */
+int make_backup(const char *fname)
+{
+	if (backup_dir)
+		return keep_backup(fname);
+	return make_simple_backup(fname);
+}

batch.c

@@ -0,0 +1,266 @@
+/*
+ * Support for the batch-file options.
+ *
+ * Copyright (C) 1999 Weiss
+ * Copyright (C) 2004 Chris Shoemaker
+ * Copyright (C) 2004-2008 Wayne Davison
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, visit the http://fsf.org website.
+ */
+
+#include "rsync.h"
+#include "zlib/zlib.h"
+#include <time.h>
+
+extern int eol_nulls;
+extern int recurse;
+extern int xfer_dirs;
+extern int preserve_links;
+extern int preserve_hard_links;
+extern int preserve_devices;
+extern int preserve_uid;
+extern int preserve_gid;
+extern int preserve_acls;
+extern int preserve_xattrs;
+extern int always_checksum;
+extern int do_compression;
+extern int inplace;
+extern int append_mode;
+extern int protocol_version;
+extern char *batch_name;
+#ifdef ICONV_OPTION
+extern char *iconv_opt;
+#endif
+
+extern struct filter_list_struct filter_list;
+
+int batch_stream_flags;
+
+static int tweaked_append;
+static int tweaked_append_verify;
+static int tweaked_iconv;
+
+static int *flag_ptr[] = {
+	&recurse,		/* 0 */
+	&preserve_uid,		/* 1 */
+	&preserve_gid,		/* 2 */
+	&preserve_links,	/* 3 */
+	&preserve_devices,	/* 4 */
+	&preserve_hard_links,	/* 5 */
+	&always_checksum,	/* 6 */
+	&xfer_dirs,		/* 7 (protocol 29) */
+	&do_compression,	/* 8 (protocol 29) */
+	&tweaked_iconv,		/* 9  (protocol 30) */
+	&preserve_acls,		/* 10 (protocol 30) */
+	&preserve_xattrs,	/* 11 (protocol 30) */
+	&inplace,		/* 12 (protocol 30) */
+	&tweaked_append,	/* 13 (protocol 30) */
+	&tweaked_append_verify,	/* 14 (protocol 30) */
+	NULL
+};
+
+static char *flag_name[] = {
+	"--recurse (-r)",
+	"--owner (-o)",
+	"--group (-g)",
+	"--links (-l)",
+	"--devices (-D)",
+	"--hard-links (-H)",
+	"--checksum (-c)",
+	"--dirs (-d)",
+	"--compress (-z)",
+	"--iconv",
+	"--acls (-A)",
+	"--xattrs (-X)",
+	"--inplace",
+	"--append",
+	"--append-verify",
+	NULL
+};
+
+void write_stream_flags(int fd)
+{
+	int i, flags;
+
+	tweaked_append = append_mode == 1;
+	tweaked_append_verify = append_mode == 2;
+#ifdef ICONV_OPTION
+	tweaked_iconv = iconv_opt != NULL;
+#endif
+
+	/* Start the batch file with a bitmap of data-stream-affecting
+	 * flags. */
+	for (i = 0, flags = 0; flag_ptr[i]; i++) {
+		if (*flag_ptr[i])
+			flags |= 1 << i;
+	}
+	write_int(fd, flags);
+}
+
+void read_stream_flags(int fd)
+{
+	batch_stream_flags = read_int(fd);
+}
+
+void check_batch_flags(void)
+{
+	int i;
+
+	if (protocol_version < 29)
+		flag_ptr[7] = NULL;
+	else if (protocol_version < 30)
+		flag_ptr[9] = NULL;
+	tweaked_append = append_mode == 1;
+	tweaked_append_verify = append_mode == 2;
+#ifdef ICONV_OPTION
+	tweaked_iconv = iconv_opt != NULL;
+#endif
+	for (i = 0; flag_ptr[i]; i++) {
+		int set = batch_stream_flags & (1 << i) ? 1 : 0;
+		if (*flag_ptr[i] != set) {
+			if (i == 9) {
+				rprintf(FERROR,
+					"%s specify the --iconv option to use this batch file.\n",
+					set ? "Please" : "Do not");
+				exit_cleanup(RERR_SYNTAX);
+			}
+			if (verbose) {
+				rprintf(FINFO,
+					"%sing the %s option to match the batchfile.\n",
+					set ? "Sett" : "Clear", flag_name[i]);
+			}
+			*flag_ptr[i] = set;
+		}
+	}
+	if (protocol_version < 29) {
+		if (recurse)
+			xfer_dirs |= 1;
+		else if (xfer_dirs < 2)
+			xfer_dirs = 0;
+	}
+
+	if (tweaked_append)
+		append_mode = 1;
+	else if (tweaked_append_verify)
+		append_mode = 2;
+}
+
+static void write_arg(int fd, char *arg)
+{
+	char *x, *s;
+
+	if (*arg == '-' && (x = strchr(arg, '=')) != NULL) {
+		write(fd, arg, x - arg + 1);
+		arg += x - arg + 1;
+	}
+
+	if (strpbrk(arg, " \"'&;|[]()$#!*?^\\") != NULL) {
+		write(fd, "'", 1);
+		for (s = arg; (x = strchr(s, '\'')) != NULL; s = x + 1) {
+			write(fd, s, x - s + 1);
+			write(fd, "'", 1);
+		}
+		write(fd, s, strlen(s));
+		write(fd, "'", 1);
+		return;
+	}
+
+	write(fd, arg, strlen(arg));
+}
+
+static void write_filter_rules(int fd)
+{
+	struct filter_struct *ent;
+
+	write_sbuf(fd, " <<'#E#'\n");
+	for (ent = filter_list.head; ent; ent = ent->next) {
+		unsigned int plen;
+		char *p = get_rule_prefix(ent->match_flags, "- ", 0, &plen);
+		write_buf(fd, p, plen);
+		write_sbuf(fd, ent->pattern);
+		if (ent->match_flags & MATCHFLG_DIRECTORY)
+			write_byte(fd, '/');
+		write_byte(fd, eol_nulls ? 0 : '\n');
+	}
+	if (eol_nulls)
+		write_sbuf(fd, ";\n");
+	write_sbuf(fd, "#E#");
+}
+
+/* This routine tries to write out an equivalent --read-batch command
+ * given the user's --write-batch args.  However, it doesn't really
+ * understand most of the options, so it uses some overly simple
+ * heuristics to munge the command line into something that will
+ * (hopefully) work. */
+void write_batch_shell_file(int argc, char *argv[], int file_arg_cnt)
+{
+	int fd, i, len;
+	char *p, filename[MAXPATHLEN];
+
+	stringjoin(filename, sizeof filename,
+		   batch_name, ".sh", NULL);
+	fd = do_open(filename, O_WRONLY | O_CREAT | O_TRUNC,
+		     S_IRUSR | S_IWUSR | S_IEXEC);
+	if (fd < 0) {
+		rsyserr(FERROR, errno, "Batch file %s open error",
+			filename);
+		exit_cleanup(RERR_FILESELECT);
+	}
+
+	/* Write argvs info to BATCH.sh file */
+	write_arg(fd, argv[0]);
+	if (filter_list.head) {
+		if (protocol_version >= 29)
+			write_sbuf(fd, " --filter=._-");
+		else
+			write_sbuf(fd, " --exclude-from=-");
+	}
+	for (i = 1; i < argc - file_arg_cnt; i++) {
+		p = argv[i];
+		if (strncmp(p, "--files-from", 12) == 0
+		    || strncmp(p, "--filter", 8) == 0
+		    || strncmp(p, "--include", 9) == 0
+		    || strncmp(p, "--exclude", 9) == 0) {
+			if (strchr(p, '=') == NULL)
+				i++;
+			continue;
+		}
+		if (strcmp(p, "-f") == 0) {
+			i++;
+			continue;
+		}
+		write(fd, " ", 1);
+		if (strncmp(p, "--write-batch", len = 13) == 0
+		 || strncmp(p, "--only-write-batch", len = 18) == 0) {
+			write(fd, "--read-batch", 12);
+			if (p[len] == '=') {
+				write(fd, "=", 1);
+				write_arg(fd, p + len + 1);
+			}
+		} else
+			write_arg(fd, p);
+	}
+	if (!(p = check_for_hostspec(argv[argc - 1], &p, &i)))
+		p = argv[argc - 1];
+	write(fd, " ${1:-", 6);
+	write_arg(fd, p);
+	write_byte(fd, '}');
+	if (filter_list.head)
+		write_filter_rules(fd);
+	if (write(fd, "\n", 1) != 1 || close(fd) < 0) {
+		rsyserr(FERROR, errno, "Batch file %s write error",
+			filename);
+		exit_cleanup(RERR_FILEIO);
+	}
+}

byteorder.h

@@ -1,26 +1,27 @@
-/* 
-   simple byteorder handling
-   Copyright (C) Andrew Tridgell 1992-1995
-   
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2 of the License, or
-   (at your option) any later version.
-   
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-   
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
+/*
+ * Simple byteorder handling.
+ *
+ * Copyright (C) 1992-1995 Andrew Tridgell
+ * Copyright (C) 2007-2008 Wayne Davison
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, visit the http://fsf.org website.
+ */
 
 #undef CAREFUL_ALIGNMENT
 
-/* we know that the x86 can handle misalignment and has the "right" 
-   byteorder */
+/* We know that the x86 can handle misalignment and has the same
+ * byte order (LSB-first) as the 32-bit numbers we transmit. */
 #ifdef __i386__
 #define CAREFUL_ALIGNMENT 0
 #endif
@@ -30,13 +31,12 @@
 #endif
 
 #define CVAL(buf,pos) (((unsigned char *)(buf))[pos])
-#define PVAL(buf,pos) ((unsigned)CVAL(buf,pos))
+#define UVAL(buf,pos) ((uint32)CVAL(buf,pos))
 #define SCVAL(buf,pos,val) (CVAL(buf,pos) = (val))
 
-
 #if CAREFUL_ALIGNMENT
-#define SVAL(buf,pos) (PVAL(buf,pos)|PVAL(buf,(pos)+1)<<8)
-#define IVAL(buf,pos) (SVAL(buf,pos)|SVAL(buf,(pos)+2)<<16)
+#define PVAL(buf,pos) (UVAL(buf,pos)|UVAL(buf,(pos)+1)<<8)
+#define IVAL(buf,pos) (PVAL(buf,pos)|PVAL(buf,(pos)+2)<<16)
 #define SSVALX(buf,pos,val) (CVAL(buf,pos)=(val)&0xFF,CVAL(buf,pos+1)=(val)>>8)
 #define SIVALX(buf,pos,val) (SSVALX(buf,pos,val&0xFFFF),SSVALX(buf,pos+2,val>>16))
 #define SIVAL(buf,pos,val) SIVALX((buf),(pos),((uint32)(val)))
@@ -50,5 +50,3 @@
 #define IVAL(buf,pos) (*(uint32 *)((char *)(buf) + (pos)))
 #define SIVAL(buf,pos,val) IVAL(buf,pos)=((uint32)(val))
 #endif
-
-

case_N.h

@@ -0,0 +1,79 @@
+/*
+ * End-of-run cleanup helper code used by cleanup.c.
+ *
+ * Copyright (C) 2006-2008 Wayne Davison
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, visit the http://fsf.org website.
+ */
+
+/* This is included by cleanup.c multiple times, once for every segement in
+ * the _exit_cleanup() code.  This produces the next "case N:" statement in
+ * sequence and increments the cleanup_step variable by 1.  This ensures that
+ * our case statements never get out of whack due to added/removed steps. */
+
+#if !defined EXIT_CLEANUP_CASE_0
+#define EXIT_CLEANUP_CASE_0
+	case 0:
+#elif !defined EXIT_CLEANUP_CASE_1
+#define EXIT_CLEANUP_CASE_1
+	case 1:
+#elif !defined EXIT_CLEANUP_CASE_2
+#define EXIT_CLEANUP_CASE_2
+	case 2:
+#elif !defined EXIT_CLEANUP_CASE_3
+#define EXIT_CLEANUP_CASE_3
+	case 3:
+#elif !defined EXIT_CLEANUP_CASE_4
+#define EXIT_CLEANUP_CASE_4
+	case 4:
+#elif !defined EXIT_CLEANUP_CASE_5
+#define EXIT_CLEANUP_CASE_5
+	case 5:
+#elif !defined EXIT_CLEANUP_CASE_6
+#define EXIT_CLEANUP_CASE_6
+	case 6:
+#elif !defined EXIT_CLEANUP_CASE_7
+#define EXIT_CLEANUP_CASE_7
+	case 7:
+#elif !defined EXIT_CLEANUP_CASE_8
+#define EXIT_CLEANUP_CASE_8
+	case 8:
+#elif !defined EXIT_CLEANUP_CASE_9
+#define EXIT_CLEANUP_CASE_9
+	case 9:
+#elif !defined EXIT_CLEANUP_CASE_10
+#define EXIT_CLEANUP_CASE_10
+	case 10:
+#elif !defined EXIT_CLEANUP_CASE_11
+#define EXIT_CLEANUP_CASE_11
+	case 11:
+#elif !defined EXIT_CLEANUP_CASE_12
+#define EXIT_CLEANUP_CASE_12
+	case 12:
+#elif !defined EXIT_CLEANUP_CASE_13
+#define EXIT_CLEANUP_CASE_13
+	case 13:
+#elif !defined EXIT_CLEANUP_CASE_14
+#define EXIT_CLEANUP_CASE_14
+	case 14:
+#elif !defined EXIT_CLEANUP_CASE_15
+#define EXIT_CLEANUP_CASE_15
+	case 15:
+#elif !defined EXIT_CLEANUP_CASE_16
+#define EXIT_CLEANUP_CASE_16
+	case 16:
+#else
+#error Need to add more case statements!
+#endif
+		cleanup_step++;

checksum.c

@@ -1,46 +1,46 @@
-/* 
-   Copyright (C) Andrew Tridgell 1996
-   Copyright (C) Paul Mackerras 1996
-   
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2 of the License, or
-   (at your option) any later version.
-   
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-   
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
+/*
+ * Routines to support checksumming of bytes.
+ *
+ * Copyright (C) 1996 Andrew Tridgell
+ * Copyright (C) 1996 Paul Mackerras
+ * Copyright (C) 2004-2008 Wayne Davison
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, visit the http://fsf.org website.
+ */
 
 #include "rsync.h"
 
-int csum_length=2; /* initial value */
+extern int checksum_seed;
+extern int protocol_version;
 
-#define CSUM_CHUNK 64
-
-int checksum_seed = 0;
-extern int remote_version;
+int csum_length = SHORT_SUM_LENGTH; /* initial value */
 
 /*
   a simple 32 bit checksum that can be upadted from either end
   (inspired by Mark Adler's Adler-32 checksum)
   */
-uint32 get_checksum1(char *buf1,int len)
+uint32 get_checksum1(char *buf1, int32 len)
 {
-    int i;
+    int32 i;
     uint32 s1, s2;
     schar *buf = (schar *)buf1;
 
     s1 = s2 = 0;
     for (i = 0; i < (len-4); i+=4) {
-	s2 += 4*(s1 + buf[i]) + 3*buf[i+1] + 2*buf[i+2] + buf[i+3] + 
+	s2 += 4*(s1 + buf[i]) + 3*buf[i+1] + 2*buf[i+2] + buf[i+3] +
 	  10*CHAR_OFFSET;
-	s1 += (buf[i+0] + buf[i+1] + buf[i+2] + buf[i+3] + 4*CHAR_OFFSET); 
+	s1 += (buf[i+0] + buf[i+1] + buf[i+2] + buf[i+3] + 4*CHAR_OFFSET);
     }
     for (; i < len; i++) {
 	s1 += (buf[i]+CHAR_OFFSET); s2 += s1;
@@ -49,132 +49,177 @@ uint32 get_checksum1(char *buf1,int len)
 }
 
 
-void get_checksum2(char *buf,int len,char *sum)
+void get_checksum2(char *buf, int32 len, char *sum)
 {
-	int i;
-	static char *buf1;
-	static int len1;
-	struct mdfour m;
+	md_context m;
 
-	if (len > len1) {
-		if (buf1) free(buf1);
-		buf1 = (char *)malloc(len+4);
-		len1 = len;
-		if (!buf1) out_of_memory("get_checksum2");
+	if (protocol_version >= 30) {
+		uchar seedbuf[4];
+		md5_begin(&m);
+		md5_update(&m, (uchar *)buf, len);
+		if (checksum_seed) {
+			SIVAL(seedbuf, 0, checksum_seed);
+			md5_update(&m, seedbuf, 4);
+		}
+		md5_result(&m, (uchar *)sum);
+	} else {
+		int32 i;
+		static char *buf1;
+		static int32 len1;
+
+		mdfour_begin(&m);
+
+		if (len > len1) {
+			if (buf1)
+				free(buf1);
+			buf1 = new_array(char, len+4);
+			len1 = len;
+			if (!buf1)
+				out_of_memory("get_checksum2");
+		}
+
+		memcpy(buf1, buf, len);
+		if (checksum_seed) {
+			SIVAL(buf1,len,checksum_seed);
+			len += 4;
+		}
+
+		for (i = 0; i + CSUM_CHUNK <= len; i += CSUM_CHUNK)
+			mdfour_update(&m, (uchar *)(buf1+i), CSUM_CHUNK);
+
+		/*
+		 * Prior to version 27 an incorrect MD4 checksum was computed
+		 * by failing to call mdfour_tail() for block sizes that
+		 * are multiples of 64.  This is fixed by calling mdfour_update()
+		 * even when there are no more bytes.
+		 */
+		if (len - i > 0 || protocol_version >= 27)
+			mdfour_update(&m, (uchar *)(buf1+i), len-i);
+
+		mdfour_result(&m, (uchar *)sum);
 	}
-	
-	mdfour_begin(&m);
-	
-	memcpy(buf1,buf,len);
-	if (checksum_seed) {
-		SIVAL(buf1,len,checksum_seed);
-		len += 4;
-	}
-	
-	for(i = 0; i + CSUM_CHUNK <= len; i += CSUM_CHUNK) {
-		mdfour_update(&m, (uchar *)(buf1+i), CSUM_CHUNK);
-	}
-	if (len - i > 0) {
-		mdfour_update(&m, (uchar *)(buf1+i), (len-i));
-	}
-	
-	mdfour_result(&m, (uchar *)sum);
 }
 
-
-void file_checksum(char *fname,char *sum,OFF_T size)
+void file_checksum(char *fname, char *sum, OFF_T size)
 {
-	OFF_T i;
 	struct map_struct *buf;
+	OFF_T i, len = size;
+	md_context m;
+	int32 remainder;
 	int fd;
-	OFF_T len = size;
-	char tmpchunk[CSUM_CHUNK];
-	struct mdfour m;
-	
-	memset(sum,0,csum_length);
-	
-	fd = open(fname,O_RDONLY);
-	if (fd == -1) return;
-	
-	buf = map_file(fd,size);
-	
-	mdfour_begin(&m);
 
-	for(i = 0; i + CSUM_CHUNK <= len; i += CSUM_CHUNK) {
-		memcpy(tmpchunk, map_ptr(buf,i,CSUM_CHUNK), CSUM_CHUNK);
-		mdfour_update(&m, (uchar *)tmpchunk, CSUM_CHUNK);
+	memset(sum, 0, MAX_DIGEST_LEN);
+
+	fd = do_open(fname, O_RDONLY, 0);
+	if (fd == -1)
+		return;
+
+	buf = map_file(fd, size, MAX_MAP_SIZE, CSUM_CHUNK);
+
+	if (protocol_version >= 30) {
+		md5_begin(&m);
+
+		for (i = 0; i + CSUM_CHUNK <= len; i += CSUM_CHUNK) {
+			md5_update(&m, (uchar *)map_ptr(buf, i, CSUM_CHUNK),
+				   CSUM_CHUNK);
+		}
+
+		remainder = (int32)(len - i);
+		if (remainder > 0)
+			md5_update(&m, (uchar *)map_ptr(buf, i, remainder), remainder);
+
+		md5_result(&m, (uchar *)sum);
+	} else {
+		mdfour_begin(&m);
+
+		for (i = 0; i + CSUM_CHUNK <= len; i += CSUM_CHUNK) {
+			mdfour_update(&m, (uchar *)map_ptr(buf, i, CSUM_CHUNK),
+				      CSUM_CHUNK);
+		}
+
+		/* Prior to version 27 an incorrect MD4 checksum was computed
+		 * by failing to call mdfour_tail() for block sizes that
+		 * are multiples of 64.  This is fixed by calling mdfour_update()
+		 * even when there are no more bytes. */
+		remainder = (int32)(len - i);
+		if (remainder > 0 || protocol_version >= 27)
+			mdfour_update(&m, (uchar *)map_ptr(buf, i, remainder), remainder);
+
+		mdfour_result(&m, (uchar *)sum);
 	}
 
-	if (len - i > 0) {
-		memcpy(tmpchunk, map_ptr(buf,i,len-i), len-i);
-		mdfour_update(&m, (uchar *)tmpchunk, (len-i));
-	}
-
-	mdfour_result(&m, (uchar *)sum);
-
 	close(fd);
 	unmap_file(buf);
 }
 
+static int32 sumresidue;
+static md_context md;
 
-void checksum_init(void)
-{
-  if (remote_version >= 14)
-    csum_length = 2; /* adaptive */
-  else
-    csum_length = SUM_LENGTH;
-}
-
-
-
-static int sumresidue;
-static char sumrbuf[CSUM_CHUNK];
-static struct mdfour md;
-
-void sum_init(void)
+void sum_init(int seed)
 {
 	char s[4];
-	mdfour_begin(&md);
-	sumresidue=0;
-	SIVAL(s,0,checksum_seed);
-	sum_update(s,4);
+
+	if (protocol_version >= 30)
+		md5_begin(&md);
+	else {
+		mdfour_begin(&md);
+		sumresidue = 0;
+		SIVAL(s, 0, seed);
+		sum_update(s, 4);
+	}
 }
 
-void sum_update(char *p,int len)
+/**
+ * Feed data into an MD4 accumulator, md.  The results may be
+ * retrieved using sum_end().  md is used for different purposes at
+ * different points during execution.
+ *
+ * @todo Perhaps get rid of md and just pass in the address each time.
+ * Very slightly clearer and slower.
+ **/
+void sum_update(const char *p, int32 len)
 {
-	int i;
+	if (protocol_version >= 30) {
+		md5_update(&md, (uchar *)p, len);
+		return;
+	}
+
 	if (len + sumresidue < CSUM_CHUNK) {
-		memcpy(sumrbuf+sumresidue, p, len);
+		memcpy(md.buffer + sumresidue, p, len);
 		sumresidue += len;
 		return;
 	}
 
 	if (sumresidue) {
-		i = MIN(CSUM_CHUNK-sumresidue,len);
-		memcpy(sumrbuf+sumresidue,p,i);
-		mdfour_update(&md, (uchar *)sumrbuf, (i+sumresidue));
+		int32 i = CSUM_CHUNK - sumresidue;
+		memcpy(md.buffer + sumresidue, p, i);
+		mdfour_update(&md, (uchar *)md.buffer, CSUM_CHUNK);
 		len -= i;
 		p += i;
 	}
 
-	for(i = 0; i + CSUM_CHUNK <= len; i += CSUM_CHUNK) {
-		memcpy(sumrbuf,p+i,CSUM_CHUNK);
-		mdfour_update(&md, (uchar *)sumrbuf, CSUM_CHUNK);
+	while (len >= CSUM_CHUNK) {
+		mdfour_update(&md, (uchar *)p, CSUM_CHUNK);
+		len -= CSUM_CHUNK;
+		p += CSUM_CHUNK;
 	}
 
-	if (len - i > 0) {
-		sumresidue = len-i;
-		memcpy(sumrbuf,p+i,sumresidue);
-	} else {
-		sumresidue = 0;    
-	}
+	sumresidue = len;
+	if (sumresidue)
+		memcpy(md.buffer, p, sumresidue);
 }
 
-void sum_end(char *sum)
+int sum_end(char *sum)
 {
-	if (sumresidue) {
-		mdfour_update(&md, (uchar *)sumrbuf, sumresidue);
+	if (protocol_version >= 30) {
+		md5_result(&md, (uchar *)sum);
+		return MD5_DIGEST_LEN;
 	}
 
+	if (sumresidue || protocol_version >= 27)
+		mdfour_update(&md, (uchar *)md.buffer, sumresidue);
+
 	mdfour_result(&md, (uchar *)sum);
+
+	return MD4_DIGEST_LEN;
 }

chmod.c

@@ -0,0 +1,225 @@
+/*
+ * Implement the core of the --chmod option.
+ *
+ * Copyright (C) 2002 Scott Howard
+ * Copyright (C) 2005-2008 Wayne Davison
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, visit the http://fsf.org website.
+ */
+
+#include "rsync.h"
+
+extern mode_t orig_umask;
+
+#define FLAG_X_KEEP (1<<0)
+#define FLAG_DIRS_ONLY (1<<1)
+#define FLAG_FILES_ONLY (1<<2)
+
+struct chmod_mode_struct {
+	struct chmod_mode_struct *next;
+	int ModeAND, ModeOR;
+	char flags;
+};
+
+#define CHMOD_ADD 1
+#define CHMOD_SUB 2
+#define CHMOD_EQ  3
+
+#define STATE_ERROR 0
+#define STATE_1ST_HALF 1
+#define STATE_2ND_HALF 2
+
+/* Parse a chmod-style argument, and break it down into one or more AND/OR
+ * pairs in a linked list.  We return a pointer to new items on succcess
+ * (appending the items to the specified list), or NULL on error. */
+struct chmod_mode_struct *parse_chmod(const char *modestr,
+				      struct chmod_mode_struct **root_mode_ptr)
+{
+	int state = STATE_1ST_HALF;
+	int where = 0, what = 0, op = 0, topbits = 0, topoct = 0, flags = 0;
+	struct chmod_mode_struct *first_mode = NULL, *curr_mode = NULL,
+				 *prev_mode = NULL;
+
+	while (state != STATE_ERROR) {
+		if (!*modestr || *modestr == ',') {
+			int bits;
+
+			if (!op) {
+				state = STATE_ERROR;
+				break;
+			}
+			prev_mode = curr_mode;
+			curr_mode = new_array(struct chmod_mode_struct, 1);
+			if (prev_mode)
+				prev_mode->next = curr_mode;
+			else
+				first_mode = curr_mode;
+			curr_mode->next = NULL;
+
+			if (where)
+				bits = where * what;
+			else {
+				where = 0111;
+				bits = (where * what) & ~orig_umask;
+			}
+
+			switch (op) {
+			case CHMOD_ADD:
+				curr_mode->ModeAND = CHMOD_BITS;
+				curr_mode->ModeOR  = bits + topoct;
+				break;
+			case CHMOD_SUB:
+				curr_mode->ModeAND = CHMOD_BITS - bits - topoct;
+				curr_mode->ModeOR  = 0;
+				break;
+			case CHMOD_EQ:
+				curr_mode->ModeAND = CHMOD_BITS - (where * 7) - (topoct ? topbits : 0);
+				curr_mode->ModeOR  = bits + topoct;
+				break;
+			}
+
+			curr_mode->flags = flags;
+
+			if (!*modestr)
+				break;
+			modestr++;
+
+			state = STATE_1ST_HALF;
+			where = what = op = topoct = topbits = flags = 0;
+		}
+
+		if (state != STATE_2ND_HALF) {
+			switch (*modestr) {
+			case 'D':
+				if (flags & FLAG_FILES_ONLY)
+					state = STATE_ERROR;
+				flags |= FLAG_DIRS_ONLY;
+				break;
+			case 'F':
+				if (flags & FLAG_DIRS_ONLY)
+					state = STATE_ERROR;
+				flags |= FLAG_FILES_ONLY;
+				break;
+			case 'u':
+				where |= 0100;
+				topbits |= 04000;
+				break;
+			case 'g':
+				where |= 0010;
+				topbits |= 02000;
+				break;
+			case 'o':
+				where |= 0001;
+				break;
+			case 'a':
+				where |= 0111;
+				break;
+			case '+':
+				op = CHMOD_ADD;
+				state = STATE_2ND_HALF;
+				break;
+			case '-':
+				op = CHMOD_SUB;
+				state = STATE_2ND_HALF;
+				break;
+			case '=':
+				op = CHMOD_EQ;
+				state = STATE_2ND_HALF;
+				break;
+			default:
+				state = STATE_ERROR;
+				break;
+			}
+		} else {
+			switch (*modestr) {
+			case 'r':
+				what |= 4;
+				break;
+			case 'w':
+				what |= 2;
+				break;
+			case 'X':
+				flags |= FLAG_X_KEEP;
+				/* FALL THROUGH */
+			case 'x':
+				what |= 1;
+				break;
+			case 's':
+				if (topbits)
+					topoct |= topbits;
+				else
+					topoct = 04000;
+				break;
+			case 't':
+				topoct |= 01000;
+				break;
+			default:
+				state = STATE_ERROR;
+				break;
+			}
+		}
+		modestr++;
+	}
+
+	if (state == STATE_ERROR) {
+		free_chmod_mode(first_mode);
+		return NULL;
+	}
+
+	if (!(curr_mode = *root_mode_ptr))
+		*root_mode_ptr = first_mode;
+	else {
+		while (curr_mode->next)
+			curr_mode = curr_mode->next;
+		curr_mode->next = first_mode;
+	}
+
+	return first_mode;
+}
+
+
+/* Takes an existing file permission and a list of AND/OR changes, and
+ * create a new permissions. */
+int tweak_mode(int mode, struct chmod_mode_struct *chmod_modes)
+{
+	int IsX = mode & 0111;
+	int NonPerm = mode & ~CHMOD_BITS;
+
+	for ( ; chmod_modes; chmod_modes = chmod_modes->next) {
+		if ((chmod_modes->flags & FLAG_DIRS_ONLY) && !S_ISDIR(NonPerm))
+			continue;
+		if ((chmod_modes->flags & FLAG_FILES_ONLY) && S_ISDIR(NonPerm))
+			continue;
+		mode &= chmod_modes->ModeAND;
+		if ((chmod_modes->flags & FLAG_X_KEEP) && !IsX && !S_ISDIR(NonPerm))
+			mode |= chmod_modes->ModeOR & ~0111;
+		else
+			mode |= chmod_modes->ModeOR;
+	}
+
+	return mode | NonPerm;
+}
+
+/* Free the linked list created by parse_chmod. */
+int free_chmod_mode(struct chmod_mode_struct *chmod_modes)
+{
+	struct chmod_mode_struct *next;
+
+	while (chmod_modes) {
+		next = chmod_modes->next;
+		free(chmod_modes);
+		chmod_modes = next;
+	}
+	return 0;
+}

cleanup.c

@@ -1,90 +1,229 @@
-/* 
-   Copyright (C) Andrew Tridgell 1996
-   Copyright (C) Paul Mackerras 1996
-   
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2 of the License, or
-   (at your option) any later version.
-   
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-   
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
+/*
+ * End-of-run cleanup routines.
+ *
+ * Copyright (C) 1996-2000 Andrew Tridgell
+ * Copyright (C) 1996 Paul Mackerras
+ * Copyright (C) 2002 Martin Pool
+ * Copyright (C) 2003-2008 Wayne Davison
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, visit the http://fsf.org website.
+ */
 
 #include "rsync.h"
 
-/* handling the cleanup when a transfer is interrupted is tricky when
-   --partial is selected. We need to ensure that the partial file is
-   kept if any real data has been transferred */
-int cleanup_got_literal=0;
-
-static char *cleanup_fname;
-static char *cleanup_new_fname;
-static struct file_struct *cleanup_file;
-static int cleanup_fd1, cleanup_fd2;
-static struct map_struct *cleanup_buf;
-static int cleanup_pid = 0;
+extern int am_server;
+extern int am_daemon;
 extern int io_error;
+extern int keep_partial;
+extern int got_xfer_error;
+extern char *partial_dir;
+extern char *logfile_name;
 
-void _exit_cleanup(int code, const char *file, int line)
+#ifdef HAVE_SIGACTION
+static struct sigaction sigact;
+#endif
+
+/**
+ * Close all open sockets and files, allowing a (somewhat) graceful
+ * shutdown() of socket connections.  This eliminates the abortive
+ * TCP RST sent by a Winsock-based system when the close() occurs.
+ **/
+void close_all(void)
 {
-	extern int keep_partial;
+#ifdef SHUTDOWN_ALL_SOCKETS
+	int max_fd;
+	int fd;
+	int ret;
+	STRUCT_STAT st;
 
-	if (code == 0 && io_error) code = RERR_FILEIO;
-
-	signal(SIGUSR1, SIG_IGN);
-
-	if (cleanup_got_literal && cleanup_fname && keep_partial) {
-		char *fname = cleanup_fname;
-		cleanup_fname = NULL;
-		if (cleanup_buf) unmap_file(cleanup_buf);
-		if (cleanup_fd1 != -1) close(cleanup_fd1);
-		if (cleanup_fd2 != -1) close(cleanup_fd2);
-		finish_transfer(cleanup_new_fname, fname, cleanup_file);
-	}
-	io_flush();
-	if (cleanup_fname)
-		do_unlink(cleanup_fname);
-	if (code) {
-		kill_all(SIGUSR1);
-	}
-	if ((cleanup_pid != 0) && (cleanup_pid == (int) getpid())) {
-		char *pidf = lp_pid_file();
-		if (pidf && *pidf) {
-			unlink(lp_pid_file());
+	max_fd = sysconf(_SC_OPEN_MAX) - 1;
+	for (fd = max_fd; fd >= 0; fd--) {
+		if ((ret = do_fstat(fd, &st)) == 0) {
+			if (is_a_socket(fd))
+				ret = shutdown(fd, 2);
+			ret = close(fd);
 		}
 	}
+#endif
+}
 
-	if (code) log_exit(code, file, line);
+/**
+ * @file cleanup.c
+ *
+ * Code for handling interrupted transfers.  Depending on the @c
+ * --partial option, we may either delete the temporary file, or go
+ * ahead and overwrite the destination.  This second behaviour only
+ * occurs if we've sent literal data and therefore hopefully made
+ * progress on the transfer.
+ **/
+
+/**
+ * Set to True once literal data has been sent across the link for the
+ * current file. (????)
+ *
+ * Handling the cleanup when a transfer is interrupted is tricky when
+ * --partial is selected.  We need to ensure that the partial file is
+ * kept if any real data has been transferred.
+ **/
+int cleanup_got_literal = 0;
+
+static const char *cleanup_fname;
+static const char *cleanup_new_fname;
+static struct file_struct *cleanup_file;
+static int cleanup_fd_r, cleanup_fd_w;
+static pid_t cleanup_pid = 0;
+
+pid_t cleanup_child_pid = -1;
+
+/**
+ * Eventually calls exit(), passing @p code, therefore does not return.
+ *
+ * @param code one of the RERR_* codes from errcode.h.
+ **/
+NORETURN void _exit_cleanup(int code, const char *file, int line)
+{
+	static int cleanup_step = 0;
+	static int exit_code = 0;
+	static int unmodified_code = 0;
+
+	SIGACTION(SIGUSR1, SIG_IGN);
+	SIGACTION(SIGUSR2, SIG_IGN);
+
+	if (exit_code) /* Preserve first error code when recursing. */
+		code = exit_code;
+
+	/* If this is the exit at the end of the run, the server side
+	 * should not attempt to output a message (see log.c). */
+	if (am_server && code == 0)
+		am_server = 2;
+
+	/* Some of our actions might cause a recursive call back here, so we
+	 * keep track of where we are in the cleanup and never repeat a step. */
+	switch (cleanup_step) {
+#include "case_N.h" /* case 0: cleanup_step++; */
+
+		exit_code = unmodified_code = code;
+
+		if (verbose > 3) {
+			rprintf(FINFO,
+				"_exit_cleanup(code=%d, file=%s, line=%d): entered\n",
+				code, file, line);
+		}
+
+		/* FALLTHROUGH */
+#include "case_N.h"
+
+		if (cleanup_child_pid != -1) {
+			int status;
+			int pid = wait_process(cleanup_child_pid, &status, WNOHANG);
+			if (pid == cleanup_child_pid) {
+				status = WEXITSTATUS(status);
+				if (status > code)
+					code = exit_code = status;
+			}
+		}
+
+		/* FALLTHROUGH */
+#include "case_N.h"
+
+		if (cleanup_got_literal && cleanup_fname && cleanup_new_fname
+		 && keep_partial && handle_partial_dir(cleanup_new_fname, PDIR_CREATE)) {
+			const char *fname = cleanup_fname;
+			cleanup_fname = NULL;
+			if (cleanup_fd_r != -1)
+				close(cleanup_fd_r);
+			if (cleanup_fd_w != -1) {
+				flush_write_file(cleanup_fd_w);
+				close(cleanup_fd_w);
+			}
+			finish_transfer(cleanup_new_fname, fname, NULL, NULL,
+					cleanup_file, 0, !partial_dir);
+		}
+
+		/* FALLTHROUGH */
+#include "case_N.h"
+
+		io_flush(FULL_FLUSH);
+
+		/* FALLTHROUGH */
+#include "case_N.h"
+
+		if (cleanup_fname)
+			do_unlink(cleanup_fname);
+		if (code)
+			kill_all(SIGUSR1);
+		if (cleanup_pid && cleanup_pid == getpid()) {
+			char *pidf = lp_pid_file();
+			if (pidf && *pidf)
+				unlink(lp_pid_file());
+		}
+
+		if (code == 0) {
+			if (io_error & IOERR_DEL_LIMIT)
+				code = exit_code = RERR_DEL_LIMIT;
+			if (io_error & IOERR_VANISHED)
+				code = exit_code = RERR_VANISHED;
+			if (io_error & IOERR_GENERAL || got_xfer_error)
+				code = exit_code = RERR_PARTIAL;
+		}
+
+		if (code || am_daemon || (logfile_name && (am_server || !verbose)))
+			log_exit(code, file, line);
+
+		/* FALLTHROUGH */
+#include "case_N.h"
+
+		if (verbose > 2) {
+			rprintf(FINFO,
+				"_exit_cleanup(code=%d, file=%s, line=%d): "
+				"about to call exit(%d)\n",
+				unmodified_code, file, line, code);
+		}
+
+		/* FALLTHROUGH */
+#include "case_N.h"
+
+		if (am_server && code)
+			msleep(100);
+		close_all();
+
+		/* FALLTHROUGH */
+	default:
+		break;
+	}
 
 	exit(code);
 }
 
 void cleanup_disable(void)
 {
-	cleanup_fname = NULL;
+	cleanup_fname = cleanup_new_fname = NULL;
 	cleanup_got_literal = 0;
 }
 
 
-void cleanup_set(char *fnametmp, char *fname, struct file_struct *file,
-		 struct map_struct *buf, int fd1, int fd2)
+void cleanup_set(const char *fnametmp, const char *fname, struct file_struct *file,
+		 int fd_r, int fd_w)
 {
 	cleanup_fname = fnametmp;
-	cleanup_new_fname = fname;
+	cleanup_new_fname = fname; /* can be NULL on a partial-dir failure */
 	cleanup_file = file;
-	cleanup_buf = buf;
-	cleanup_fd1 = fd1;
-	cleanup_fd2 = fd2;
+	cleanup_fd_r = fd_r;
+	cleanup_fd_w = fd_w;
 }
 
-void cleanup_set_pid(int pid)
+void cleanup_set_pid(pid_t pid)
 {
 	cleanup_pid = pid;
 }

clientname.c

@@ -0,0 +1,343 @@
+/*
+ * Functions for looking up the remote name or addr of a socket.
+ *
+ * Copyright (C) 1992-2001 Andrew Tridgell <tridge@samba.org>
+ * Copyright (C) 2001, 2002 Martin Pool <mbp@samba.org>
+ * Copyright (C) 2002-2008 Wayne Davison
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, visit the http://fsf.org website.
+ */
+
+/*
+ * This file is now converted to use the new-style getaddrinfo()
+ * interface, which supports IPv6 but is also supported on recent
+ * IPv4-only machines.  On systems that don't have that interface, we
+ * emulate it using the KAME implementation.
+ */
+
+#include "rsync.h"
+
+static const char default_name[] = "UNKNOWN";
+extern int am_server;
+
+
+/**
+ * Return the IP addr of the client as a string
+ **/
+char *client_addr(int fd)
+{
+	static char addr_buf[100];
+	static int initialised;
+	struct sockaddr_storage ss;
+	socklen_t length = sizeof ss;
+	char *ssh_info, *p;
+
+	if (initialised)
+		return addr_buf;
+
+	initialised = 1;
+
+	if (am_server) {	/* daemon over --rsh mode */
+		strlcpy(addr_buf, "0.0.0.0", sizeof addr_buf);
+		if ((ssh_info = getenv("SSH_CONNECTION")) != NULL
+		    || (ssh_info = getenv("SSH_CLIENT")) != NULL
+		    || (ssh_info = getenv("SSH2_CLIENT")) != NULL) {
+			strlcpy(addr_buf, ssh_info, sizeof addr_buf);
+			/* Truncate the value to just the IP address. */
+			if ((p = strchr(addr_buf, ' ')) != NULL)
+				*p = '\0';
+		}
+	} else {
+		client_sockaddr(fd, &ss, &length);
+		getnameinfo((struct sockaddr *)&ss, length,
+			    addr_buf, sizeof addr_buf, NULL, 0, NI_NUMERICHOST);
+	}
+
+	return addr_buf;
+}
+
+
+static int get_sockaddr_family(const struct sockaddr_storage *ss)
+{
+	return ((struct sockaddr *) ss)->sa_family;
+}
+
+
+/**
+ * Return the DNS name of the client.
+ *
+ * The name is statically cached so that repeated lookups are quick,
+ * so there is a limit of one lookup per customer.
+ *
+ * If anything goes wrong, including the name->addr->name check, then
+ * we just use "UNKNOWN", so you can use that value in hosts allow
+ * lines.
+ *
+ * After translation from sockaddr to name we do a forward lookup to
+ * make sure nobody is spoofing PTR records.
+ **/
+char *client_name(int fd)
+{
+	static char name_buf[100];
+	static char port_buf[100];
+	static int initialised;
+	struct sockaddr_storage ss;
+	socklen_t ss_len;
+
+	if (initialised)
+		return name_buf;
+
+	strlcpy(name_buf, default_name, sizeof name_buf);
+	initialised = 1;
+
+	memset(&ss, 0, sizeof ss);
+
+	if (am_server) {	/* daemon over --rsh mode */
+		char *addr = client_addr(fd);
+		struct addrinfo hint, *answer;
+		int err;
+
+		memset(&hint, 0, sizeof hint);
+
+#ifdef AI_NUMERICHOST
+		hint.ai_flags = AI_NUMERICHOST;
+#endif
+		hint.ai_socktype = SOCK_STREAM;
+
+		if ((err = getaddrinfo(addr, NULL, &hint, &answer)) != 0) {
+			rprintf(FLOG, "malformed address %s: %s\n",
+			        addr, gai_strerror(err));
+			return name_buf;
+		}
+
+		switch (answer->ai_family) {
+		case AF_INET:
+			ss_len = sizeof (struct sockaddr_in);
+			memcpy(&ss, answer->ai_addr, ss_len);
+			break;
+#ifdef INET6
+		case AF_INET6:
+			ss_len = sizeof (struct sockaddr_in6);
+			memcpy(&ss, answer->ai_addr, ss_len);
+			break;
+#endif
+		default:
+			exit_cleanup(RERR_SOCKETIO);
+		}
+		freeaddrinfo(answer);
+	} else {
+		ss_len = sizeof ss;
+		client_sockaddr(fd, &ss, &ss_len);
+	}
+
+	if (lookup_name(fd, &ss, ss_len, name_buf, sizeof name_buf,
+			port_buf, sizeof port_buf) == 0)
+		check_name(fd, &ss, name_buf, sizeof name_buf);
+
+	return name_buf;
+}
+
+
+
+/**
+ * Get the sockaddr for the client.
+ *
+ * If it comes in as an ipv4 address mapped into IPv6 format then we
+ * convert it back to a regular IPv4.
+ **/
+void client_sockaddr(int fd,
+		     struct sockaddr_storage *ss,
+		     socklen_t *ss_len)
+{
+	memset(ss, 0, sizeof *ss);
+
+	if (getpeername(fd, (struct sockaddr *) ss, ss_len)) {
+		/* FIXME: Can we really not continue? */
+		rsyserr(FLOG, errno, "getpeername on fd%d failed", fd);
+		exit_cleanup(RERR_SOCKETIO);
+	}
+
+#ifdef INET6
+	if (get_sockaddr_family(ss) == AF_INET6 &&
+	    IN6_IS_ADDR_V4MAPPED(&((struct sockaddr_in6 *)ss)->sin6_addr)) {
+		/* OK, so ss is in the IPv6 family, but it is really
+		 * an IPv4 address: something like
+		 * "::ffff:10.130.1.2".  If we use it as-is, then the
+		 * reverse lookup might fail or perhaps something else
+		 * bad might happen.  So instead we convert it to an
+		 * equivalent address in the IPv4 address family.  */
+		struct sockaddr_in6 sin6;
+		struct sockaddr_in *sin;
+
+		memcpy(&sin6, ss, sizeof sin6);
+		sin = (struct sockaddr_in *)ss;
+		memset(sin, 0, sizeof *sin);
+		sin->sin_family = AF_INET;
+		*ss_len = sizeof (struct sockaddr_in);
+#ifdef HAVE_SOCKADDR_IN_LEN
+		sin->sin_len = *ss_len;
+#endif
+		sin->sin_port = sin6.sin6_port;
+
+		/* There is a macro to extract the mapped part
+		 * (IN6_V4MAPPED_TO_SINADDR ?), but it does not seem
+		 * to be present in the Linux headers. */
+		memcpy(&sin->sin_addr, &sin6.sin6_addr.s6_addr[12],
+		    sizeof sin->sin_addr);
+	}
+#endif
+}
+
+
+/**
+ * Look up a name from @p ss into @p name_buf.
+ *
+ * @param fd file descriptor for client socket.
+ **/
+int lookup_name(int fd, const struct sockaddr_storage *ss,
+		socklen_t ss_len,
+		char *name_buf, size_t name_buf_size,
+		char *port_buf, size_t port_buf_size)
+{
+	int name_err;
+
+	/* reverse lookup */
+	name_err = getnameinfo((struct sockaddr *) ss, ss_len,
+			       name_buf, name_buf_size,
+			       port_buf, port_buf_size,
+			       NI_NAMEREQD | NI_NUMERICSERV);
+	if (name_err != 0) {
+		strlcpy(name_buf, default_name, name_buf_size);
+		rprintf(FLOG, "name lookup failed for %s: %s\n",
+			client_addr(fd), gai_strerror(name_err));
+		return name_err;
+	}
+
+	return 0;
+}
+
+
+
+/**
+ * Compare an addrinfo from the resolver to a sockinfo.
+ *
+ * Like strcmp, returns 0 for identical.
+ **/
+int compare_addrinfo_sockaddr(const struct addrinfo *ai,
+			      const struct sockaddr_storage *ss)
+{
+	int ss_family = get_sockaddr_family(ss);
+	const char fn[] = "compare_addrinfo_sockaddr";
+
+	if (ai->ai_family != ss_family) {
+		rprintf(FLOG, "%s: response family %d != %d\n",
+			fn, ai->ai_family, ss_family);
+		return 1;
+	}
+
+	/* The comparison method depends on the particular AF. */
+	if (ss_family == AF_INET) {
+		const struct sockaddr_in *sin1, *sin2;
+
+		sin1 = (const struct sockaddr_in *) ss;
+		sin2 = (const struct sockaddr_in *) ai->ai_addr;
+
+		return memcmp(&sin1->sin_addr, &sin2->sin_addr,
+			      sizeof sin1->sin_addr);
+	}
+
+#ifdef INET6
+	if (ss_family == AF_INET6) {
+		const struct sockaddr_in6 *sin1, *sin2;
+
+		sin1 = (const struct sockaddr_in6 *) ss;
+		sin2 = (const struct sockaddr_in6 *) ai->ai_addr;
+
+		if (ai->ai_addrlen < sizeof (struct sockaddr_in6)) {
+			rprintf(FLOG, "%s: too short sockaddr_in6; length=%d\n",
+				fn, (int)ai->ai_addrlen);
+			return 1;
+		}
+
+		if (memcmp(&sin1->sin6_addr, &sin2->sin6_addr,
+			   sizeof sin1->sin6_addr))
+			return 1;
+
+#ifdef HAVE_SOCKADDR_IN6_SCOPE_ID
+		if (sin1->sin6_scope_id != sin2->sin6_scope_id)
+			return 1;
+#endif
+		return 0;
+	}
+#endif /* INET6 */
+
+	/* don't know */
+	return 1;
+}
+
+
+/**
+ * Do a forward lookup on @p name_buf and make sure it corresponds to
+ * @p ss -- otherwise we may be being spoofed.  If we suspect we are,
+ * then we don't abort the connection but just emit a warning, and
+ * change @p name_buf to be "UNKNOWN".
+ *
+ * We don't do anything with the service when checking the name,
+ * because it doesn't seem that it could be spoofed in any way, and
+ * getaddrinfo on random service names seems to cause problems on AIX.
+ **/
+int check_name(int fd,
+	       const struct sockaddr_storage *ss,
+	       char *name_buf, size_t name_buf_size)
+{
+	struct addrinfo hints, *res, *res0;
+	int error;
+	int ss_family = get_sockaddr_family(ss);
+
+	memset(&hints, 0, sizeof hints);
+	hints.ai_family = ss_family;
+	hints.ai_flags = AI_CANONNAME;
+	hints.ai_socktype = SOCK_STREAM;
+	error = getaddrinfo(name_buf, NULL, &hints, &res0);
+	if (error) {
+		rprintf(FLOG, "forward name lookup for %s failed: %s\n",
+			name_buf, gai_strerror(error));
+		strlcpy(name_buf, default_name, name_buf_size);
+		return error;
+	}
+
+	/* Given all these results, we expect that one of them will be
+	 * the same as ss.  The comparison is a bit complicated. */
+	for (res = res0; res; res = res->ai_next) {
+		if (!compare_addrinfo_sockaddr(res, ss))
+			break;	/* OK, identical */
+	}
+
+	if (!res0) {
+		/* We hit the end of the list without finding an
+		 * address that was the same as ss. */
+		rprintf(FLOG, "no known address for \"%s\": "
+			"spoofed address?\n", name_buf);
+		strlcpy(name_buf, default_name, name_buf_size);
+	} else if (res == NULL) {
+		/* We hit the end of the list without finding an
+		 * address that was the same as ss. */
+		rprintf(FLOG, "%s is not a known address for \"%s\": "
+			"spoofed address?\n", client_addr(fd), name_buf);
+		strlcpy(name_buf, default_name, name_buf_size);
+	}
+
+	freeaddrinfo(res0);
+	return 0;
+}

compat.c

@@ -1,75 +1,307 @@
-/* 
-   Copyright (C) Andrew Tridgell 1996
-   Copyright (C) Paul Mackerras 1996
-   
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2 of the License, or
-   (at your option) any later version.
-   
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-   
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-/* compatability routines for older rsync protocol versions */
+/*
+ * Compatibility routines for older rsync protocol versions.
+ *
+ * Copyright (C) Andrew Tridgell 1996
+ * Copyright (C) Paul Mackerras 1996
+ * Copyright (C) 2004-2008 Wayne Davison
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, visit the http://fsf.org website.
+ */
 
 #include "rsync.h"
 
+int remote_protocol = 0;
+int file_extra_cnt = 0; /* count of file-list extras that everyone gets */
+int inc_recurse = 0;
+
+extern int verbose;
 extern int am_server;
-
-extern int csum_length;
-
-extern int preserve_links;
-extern int preserve_perms;
-extern int preserve_devices;
+extern int am_sender;
+extern int local_server;
+extern int inplace;
+extern int recurse;
+extern int use_qsort;
+extern int allow_inc_recurse;
+extern int append_mode;
+extern int fuzzy_basis;
+extern int read_batch;
+extern int delay_updates;
+extern int checksum_seed;
+extern int basis_dir_cnt;
+extern int prune_empty_dirs;
+extern int protocol_version;
+extern int protect_args;
 extern int preserve_uid;
 extern int preserve_gid;
-extern int preserve_times;
-extern int always_checksum;
-extern int checksum_seed;
+extern int preserve_acls;
+extern int preserve_xattrs;
+extern int need_messages_from_generator;
+extern int delete_mode, delete_before, delete_during, delete_after;
+extern char *shell_cmd;
+extern char *partial_dir;
+extern char *dest_option;
+extern char *files_from;
+extern char *filesfrom_host;
+extern struct filter_list_struct filter_list;
+extern int need_unsorted_flist;
+#ifdef ICONV_OPTION
+extern iconv_t ic_send, ic_recv;
+#endif
 
+/* These index values are for the file-list's extra-attribute array. */
+int uid_ndx, gid_ndx, acls_ndx, xattrs_ndx, unsort_ndx;
 
-extern int remote_version;
-extern int verbose;
+int receiver_symlink_times = 0; /* receiver can set the time on a symlink */
+
+#ifdef ICONV_OPTION
+int filesfrom_convert = 0;
+#endif
+
+#define CF_INC_RECURSE	 (1<<0)
+#define CF_SYMLINK_TIMES (1<<1)
+
+static const char *client_info;
+
+/* The server makes sure that if either side only supports a pre-release
+ * version of a protocol, that both sides must speak a compatible version
+ * of that protocol for it to be advertised as available. */
+static void check_sub_protocol(void)
+{
+	char *dot;
+	int their_protocol, their_sub;
+#if SUBPROTOCOL_VERSION != 0
+	int our_sub = protocol_version < PROTOCOL_VERSION ? 0 : SUBPROTOCOL_VERSION;
+#else
+	int our_sub = 0;
+#endif
+
+	/* client_info starts with VER.SUB string if client is a pre-release. */
+	if (!(their_protocol = atoi(client_info))
+	 || !(dot = strchr(client_info, '.'))
+	 || !(their_sub = atoi(dot+1))) {
+#if SUBPROTOCOL_VERSION != 0
+		if (our_sub)
+			protocol_version--;
+#endif
+		return;
+	}
+
+	if (their_protocol < protocol_version) {
+		if (their_sub)
+			protocol_version = their_protocol - 1;
+		return;
+	}
+
+	if (their_protocol > protocol_version)
+		their_sub = 0; /* 0 == final version of older protocol */
+	if (their_sub != our_sub)
+		protocol_version--;
+}
+
+void set_allow_inc_recurse(void)
+{
+	client_info = shell_cmd ? shell_cmd : "";
+
+	if (!recurse || use_qsort)
+		allow_inc_recurse = 0;
+	else if (!am_sender
+	 && (delete_before || delete_after
+	  || delay_updates || prune_empty_dirs))
+		allow_inc_recurse = 0;
+	else if (am_server && !local_server
+	 && (strchr(client_info, 'i') == NULL))
+		allow_inc_recurse = 0;
+}
 
 void setup_protocol(int f_out,int f_in)
 {
-	if (remote_version == 0) {
-		if (am_server) {
-			remote_version = read_int(f_in);
-			write_int(f_out,PROTOCOL_VERSION);
-		} else {
-			write_int(f_out,PROTOCOL_VERSION);
-			remote_version = read_int(f_in);
-		}
+	if (am_sender)
+		file_extra_cnt += PTR_EXTRA_CNT;
+	else
+		file_extra_cnt++;
+	if (preserve_uid)
+		uid_ndx = ++file_extra_cnt;
+	if (preserve_gid)
+		gid_ndx = ++file_extra_cnt;
+	if (preserve_acls && !am_sender)
+		acls_ndx = ++file_extra_cnt;
+	if (preserve_xattrs)
+		xattrs_ndx = ++file_extra_cnt;
+
+	if (am_server)
+		set_allow_inc_recurse();
+
+	if (remote_protocol == 0) {
+		if (am_server && !local_server)
+			check_sub_protocol();
+		if (!read_batch)
+			write_int(f_out, protocol_version);
+		remote_protocol = read_int(f_in);
+		if (protocol_version > remote_protocol)
+			protocol_version = remote_protocol;
+	}
+	if (read_batch && remote_protocol > protocol_version) {
+		rprintf(FERROR, "The protocol version in the batch file is too new (%d > %d).\n",
+			remote_protocol, protocol_version);
+		exit_cleanup(RERR_PROTOCOL);
 	}
 
-	if (remote_version < MIN_PROTOCOL_VERSION ||
-	    remote_version > MAX_PROTOCOL_VERSION) {
-		rprintf(FERROR,"protocol version mismatch - is your shell clean?\n");
+	if (verbose > 3) {
+		rprintf(FINFO, "(%s) Protocol versions: remote=%d, negotiated=%d\n",
+			am_server? "Server" : "Client", remote_protocol, protocol_version);
+	}
+	if (remote_protocol < MIN_PROTOCOL_VERSION
+	 || remote_protocol > MAX_PROTOCOL_VERSION) {
+		rprintf(FERROR,"protocol version mismatch -- is your shell clean?\n");
 		rprintf(FERROR,"(see the rsync man page for an explanation)\n");
 		exit_cleanup(RERR_PROTOCOL);
-	}	
-	
-	if (verbose > 2)
-		rprintf(FINFO, "local_version=%d remote_version=%d\n",
-			PROTOCOL_VERSION, remote_version);
-	
-	if (remote_version >= 12) {
-		if (am_server) {
-			checksum_seed = time(NULL);
-			write_int(f_out,checksum_seed);
-		} else {
-			checksum_seed = read_int(f_in);
+	}
+	if (remote_protocol < OLD_PROTOCOL_VERSION) {
+		rprintf(FINFO,"%s is very old version of rsync, upgrade recommended.\n",
+			am_server? "Client" : "Server");
+	}
+	if (protocol_version < MIN_PROTOCOL_VERSION) {
+		rprintf(FERROR, "--protocol must be at least %d on the %s.\n",
+			MIN_PROTOCOL_VERSION, am_server? "Server" : "Client");
+		exit_cleanup(RERR_PROTOCOL);
+	}
+	if (protocol_version > PROTOCOL_VERSION) {
+		rprintf(FERROR, "--protocol must be no more than %d on the %s.\n",
+			PROTOCOL_VERSION, am_server? "Server" : "Client");
+		exit_cleanup(RERR_PROTOCOL);
+	}
+	if (read_batch)
+		check_batch_flags();
+
+	if (protocol_version < 30) {
+		if (append_mode == 1)
+			append_mode = 2;
+		if (preserve_acls && !local_server) {
+			rprintf(FERROR,
+			    "--acls requires protocol 30 or higher"
+			    " (negotiated %d).\n",
+			    protocol_version);
+			exit_cleanup(RERR_PROTOCOL);
+		}
+		if (preserve_xattrs && !local_server) {
+			rprintf(FERROR,
+			    "--xattrs requires protocol 30 or higher"
+			    " (negotiated %d).\n",
+			    protocol_version);
+			exit_cleanup(RERR_PROTOCOL);
 		}
 	}
-	
-	checksum_init();
-}
 
+	if (delete_mode && !(delete_before+delete_during+delete_after)) {
+		if (protocol_version < 30)
+			delete_before = 1;
+		else
+			delete_during = 1;
+	}
+
+	if (protocol_version < 29) {
+		if (fuzzy_basis) {
+			rprintf(FERROR,
+			    "--fuzzy requires protocol 29 or higher"
+			    " (negotiated %d).\n",
+			    protocol_version);
+			exit_cleanup(RERR_PROTOCOL);
+		}
+
+		if (basis_dir_cnt && inplace) {
+			rprintf(FERROR,
+			    "%s with --inplace requires protocol 29 or higher"
+			    " (negotiated %d).\n",
+			    dest_option, protocol_version);
+			exit_cleanup(RERR_PROTOCOL);
+		}
+
+		if (basis_dir_cnt > 1) {
+			rprintf(FERROR,
+			    "Using more than one %s option requires protocol"
+			    " 29 or higher (negotiated %d).\n",
+			    dest_option, protocol_version);
+			exit_cleanup(RERR_PROTOCOL);
+		}
+
+		if (prune_empty_dirs) {
+			rprintf(FERROR,
+			    "--prune-empty-dirs requires protocol 29 or higher"
+			    " (negotiated %d).\n",
+			    protocol_version);
+			exit_cleanup(RERR_PROTOCOL);
+		}
+	} else if (protocol_version >= 30) {
+		int compat_flags;
+		if (am_server) {
+			compat_flags = allow_inc_recurse ? CF_INC_RECURSE : 0;
+#if defined HAVE_LUTIMES && defined HAVE_UTIMES
+			compat_flags |= CF_SYMLINK_TIMES;
+#endif
+			write_byte(f_out, compat_flags);
+		} else
+			compat_flags = read_byte(f_in);
+		/* The inc_recurse var MUST be set to 0 or 1. */
+		inc_recurse = compat_flags & CF_INC_RECURSE ? 1 : 0;
+		if (am_sender) {
+			receiver_symlink_times = am_server
+			    ? strchr(client_info, 'L') != NULL
+			    : !!(compat_flags & CF_SYMLINK_TIMES);
+		}
+#if defined HAVE_LUTIMES && defined HAVE_UTIMES
+		else
+			receiver_symlink_times = 1;
+#endif
+		if (inc_recurse && !allow_inc_recurse) {
+			/* This should only be able to happen in a batch. */
+			fprintf(stderr,
+			    "Incompatible options specified for inc-recursive %s.\n",
+			    read_batch ? "batch file" : "connection");
+			exit_cleanup(RERR_SYNTAX);
+		}
+		need_messages_from_generator = 1;
+#if defined HAVE_LUTIMES && defined HAVE_UTIMES
+	} else if (!am_sender) {
+		receiver_symlink_times = 1;
+#endif
+	}
+
+	if (need_unsorted_flist && (!am_sender || inc_recurse))
+		unsort_ndx = ++file_extra_cnt;
+
+	if (partial_dir && *partial_dir != '/' && (!am_server || local_server)) {
+		int flags = MATCHFLG_NO_PREFIXES | MATCHFLG_DIRECTORY;
+		if (!am_sender || protocol_version >= 30)
+			flags |= MATCHFLG_PERISHABLE;
+		parse_rule(&filter_list, partial_dir, flags, 0);
+	}
+
+
+#ifdef ICONV_OPTION
+	if (protect_args && files_from) {
+		if (am_sender)
+			filesfrom_convert = filesfrom_host && ic_send != (iconv_t)-1;
+		else
+			filesfrom_convert = !filesfrom_host && ic_recv != (iconv_t)-1;
+	}
+#endif
+
+	if (am_server) {
+		if (!checksum_seed)
+			checksum_seed = time(NULL);
+		write_int(f_out, checksum_seed);
+	} else {
+		checksum_seed = read_int(f_in);
+	}
+}

configure

@@ -0,0 +1,25 @@
+#!/bin/sh -e
+# This configure script ensures that the configure.sh script exists, and
+# if not, it tries to fetch rsync's generated files or build them.  We
+# then transfer control to the configure.sh script to do the real work.
+
+dir=`dirname $0`
+realconfigure="$dir/configure.sh"
+
+if test ! -f "$realconfigure"; then
+    if test -f "$HOME/build_farm/build_test.fns"; then
+	# Allow the build farm to grab latest files via rsync.
+	actions='build fetch'
+    else
+	actions='build'
+    fi
+    if "$dir/prepare-source" $actions; then
+	:
+    else
+	echo 'Failed to build configure.sh and/or config.h.in -- giving up.' >&2
+	rm -f "$realconfigure"
+	exit 1
+    fi
+fi
+
+exec "$realconfigure" "${@}"

connection.c

@@ -1,49 +1,46 @@
-/* 
-   Copyright (C) Andrew Tridgell 1998
-   
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2 of the License, or
-   (at your option) any later version.
-   
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-   
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
+/*
+ * Support the max connections option.
+ *
+ * Copyright (C) 1998 Andrew Tridgell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, visit the http://fsf.org website.
+ */
 
-/* support the max connections option */
 #include "rsync.h"
 
-
-/****************************************************************************
-simple routine to do connection counting
-****************************************************************************/
-int claim_connection(char *fname,int max_connections)
+/* A simple routine to do connection counting.  This returns 1 on success
+ * and 0 on failure, with errno also being set if the open() failed (errno
+ * will be 0 if the lock request failed). */
+int claim_connection(char *fname, int max_connections)
 {
 	int fd, i;
 
-	if (max_connections <= 0)
+	if (max_connections == 0)
 		return 1;
 
-	fd = open(fname,O_RDWR|O_CREAT, 0600);
-
-	if (fd == -1) {
+	if ((fd = open(fname, O_RDWR|O_CREAT, 0600)) < 0)
 		return 0;
+
+	/* Find a free spot. */
+	for (i = 0; i < max_connections; i++) {
+		if (lock_range(fd, i*4, 4))
+			return 1;
 	}
 
-	/* find a free spot */
-	for (i=0;i<max_connections;i++) {
-		if (lock_range(fd, i*4, 4)) return 1;
-	}		
-
-	/* only interested in open failures */
-	errno = 0;
-
 	close(fd);
+
+	/* A lock failure needs to return an errno of 0. */
+	errno = 0;
 	return 0;
 }

csprotocol.txt

@@ -0,0 +1,88 @@
+This is kind of informal and may be wrong, but it helped me.  It's
+basically a summary of clientserver.c and authenticate.c.
+
+ -- Martin Pool <mbp@samba.org>
+
+
+This is the protocol used for rsync --daemon; i.e. connections to port
+873 rather than invocations over a remote shell.
+
+When the server accepts a connection, it prints a greeting
+
+  @RSYNCD: <version>.<subprotocol>
+
+where <version> is the numeric version (see PROTOCOL_VERSION in rsync.h)
+'.' is a literal period, and <subprotocol> is the numeric subprotocol
+version (see SUBPROTOCOL_VERSION -- it will be 0 for final releases).
+Protocols prior to 30 only output <version> alone.  The daemon expects
+to see a similar greeting back from the client.  For protocols prior to
+30, an absent ".<subprotocol>" value is assumed to be 0.  For protocol
+30, an absent value is a fatal error.  The daemon then follows this line
+with a free-format text message-of-the-day (if any is defined).
+
+The server is now in the connected state.  The client can either send
+the command
+
+  #list
+
+to get a listing of modules, or the name of a module.  After this, the
+connection is now bound to a particular module.  Access per host for
+this module is now checked, as is per-module connection limits.
+
+If authentication is required to use this module, the server will say
+
+  @RSYNCD: AUTHREQD <challenge>
+
+where <challenge> is a random string of base64 characters.  The client
+must respond with
+
+  <user> <response>
+
+where <user> is the username they claim to be, and <response> is the
+base64 form of the MD4 hash of challenge+password.
+
+At this point the server applies all remaining constraints before
+handing control to the client, including switching uid/gid, setting up
+include and exclude lists, moving to the root of the module, and doing
+chroot.
+
+If the login is acceptable, then the server will respond with
+
+  @RSYNCD: OK
+
+The client now writes some rsync options, as if it were remotely
+executing the command.  The server parses these arguments as if it had
+just been invoked with them, but they're added to the existing state.
+So if the client specifies a list of files to be included or excluded,
+they'll defer to existing limits specified in the server
+configuration.
+
+At this point the client and server both switch to using a
+multiplexing layer across the socket.  The main point of this is to
+allow the server to asynchronously pass errors back, while still
+allowing streamed and pipelined data.
+
+Unfortunately, the multiplex protocol is not used at every stage.  We
+start up in plain socket mode and then change over by calling
+io_start_buffering.  Of course both the client and the server have to
+do this at the same point.
+
+The server then talks to the client as normal across the socket,
+passing checksums, file lists and so on.  For documentation of that,
+stay tuned (or write it yourself!).
+
+
+
+------------
+Protocol version changes
+
+30	(2007-10-04, 3.0.0pre1)
+
+	The use of a ".<subprotocol>" number was added to
+	@RSYNCD: <version>.<subprotocol>
+
+25	(2001-08-20, 2.4.7pre2) 
+
+	Send an explicit "@RSYNC EXIT" command at the end of the
+	module listing.  We never intentionally end the transmission
+	by just closing the socket anymore.

doc/README-SGML

@@ -0,0 +1,20 @@
+Handling the rsync SGML documentation
+
+rsync documentation is now primarily in Docbook format.  Docbook is an
+SGML/XML documentation format that is becoming standard on free
+operating systems.  It's also used for Samba documentation.
+
+The SGML files are source code that can be translated into various
+useful output formats, primarily PDF, HTML, Postscript and plain text.  
+
+To do this transformation on Debian, you should install the
+docbook-utils package.  Having done that, you can say 
+
+  docbook2pdf rsync.sgml
+
+and so on.
+
+On other systems you probably need James Clark's "sp" and "JadeTeX"
+packages.  Work it out for yourself and send a note to the mailing
+list.
+

doc/profile.txt

@@ -0,0 +1,42 @@
+Notes on rsync profiling
+
+strlcpy is hot:
+
+                0.00    0.00       1/7735635     push_dir [68]
+                0.00    0.00       1/7735635     pop_dir [71]
+                0.00    0.00       1/7735635     send_file_list [15]
+                0.01    0.00   18857/7735635     send_files [4]
+                0.04    0.00  129260/7735635     send_file_entry [18]
+                0.04    0.00  129260/7735635     make_file [20]
+                0.04    0.00  141666/7735635     send_directory <cycle 1> [36]
+                2.29    0.00 7316589/7735635     f_name [13]
+[14]    11.7    2.42    0.00 7735635         strlcpy [14]
+
+
+Here's the top few functions:
+
+ 46.23      9.57     9.57 13160929     0.00     0.00  mdfour64
+ 14.78     12.63     3.06 13160929     0.00     0.00  copy64
+ 11.69     15.05     2.42  7735635     0.00     0.00  strlcpy
+ 10.05     17.13     2.08    41438     0.05     0.38  sum_update
+  4.11     17.98     0.85 13159996     0.00     0.00  mdfour_update
+  1.50     18.29     0.31                             file_compare
+  1.45     18.59     0.30   129261     0.00     0.01  send_file_entry
+  1.23     18.84     0.26  2557585     0.00     0.00  f_name
+  1.11     19.07     0.23  1483750     0.00     0.00  u_strcmp
+  1.11     19.30     0.23   118129     0.00     0.00  writefd_unbuffered
+  0.92     19.50     0.19  1085011     0.00     0.00  writefd
+  0.43     19.59     0.09   156987     0.00     0.00  read_timeout
+  0.43     19.68     0.09   129261     0.00     0.00  clean_fname
+  0.39     19.75     0.08    32887     0.00     0.38  matched
+  0.34     19.82     0.07        1    70.00 16293.92  send_files
+  0.29     19.89     0.06   129260     0.00     0.00  make_file
+  0.29     19.95     0.06    75430     0.00     0.00  read_unbuffered
+
+
+
+mdfour could perhaps be made faster:
+
+/* NOTE: This code makes no attempt to be fast!  */
+
+There might be an optimized version somewhere that we can borrow.

doc/rsync.sgml

@@ -0,0 +1,351 @@
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook V4.1//EN">
+<book id="rsync">
+  <bookinfo>
+    <title>rsync</title>
+    <copyright>
+      <year>1996 -- 2002</year>
+      <holder>Martin Pool</holder>
+      <holder>Andrew Tridgell</holder>
+    </copyright>
+    <author>
+      <firstname>Martin</firstname>
+      <surname>Pool</surname>
+    </author>
+  </bookinfo>
+
+  <chapter>
+    <title>Introduction</title>
+
+    <para>rsync is a flexible program for efficiently copying files or
+      directory trees.
+
+    <para>rsync has many options to select which files will be copied
+      and how they are to be transferred.  It may be used as an
+      alternative to ftp, http, scp or rcp.
+
+    <para>The rsync remote-update protocol allows rsync to transfer just
+      the differences between two sets of files across the network link,
+      using an efficient checksum-search algorithm described in the
+      technical report that accompanies this package.</para>
+
+    <para>Some of the additional features of rsync are:</para>
+
+    <itemizedlist>
+      
+      <listitem>
+	<para>support for copying links, devices, owners, groups and
+	  permissions
+	</para>
+      </listitem>
+      
+      <listitem>
+	<para>
+	  exclude and exclude-from options similar to GNU tar
+	</para>
+      </listitem>
+
+      <listitem>
+	<para>
+	  a CVS exclude mode for ignoring the same files that CVS would ignore
+      </listitem>
+
+      <listitem>
+	<para>
+	  can use any transparent remote shell, including rsh or ssh
+      </listitem>
+
+      <listitem>
+	<para>
+	  does not require root privileges
+      </listitem>
+
+      <listitem>
+	<para>
+	  pipelining of file transfers to minimize latency costs
+      </listitem>
+		
+      <listitem>
+	<para>
+	  support for anonymous or authenticated rsync servers (ideal for
+	  mirroring)
+	</para>
+      </listitem>
+    </itemizedlist>
+  </chapter>
+
+
+
+  <chapter>
+    <title>Using rsync</title>
+    <section>
+      <title>
+	Introductory example
+      </title>
+      
+      <para>
+	Probably the most common case of rsync usage is to copy files
+	to or from a remote machine using
+	<application>ssh</application> as a network transport.  In
+	this situation rsync is a good alternative to
+	<application>scp</application>.
+      </para>
+
+      <para>
+	The most commonly used arguments for rsync are
+      </para>
+
+      <variablelist>
+	<varlistentry>
+	  <term><option>-v</option></term>
+	  <listitem>
+	    <para>Be verbose.  Primarily, display the name of each file as it is copied.</para>
+	  </listitem>
+	</varlistentry>
+
+
+	<varlistentry>
+	  <term><option>-a</option></term>
+	  <listitem>
+	    <para>
+	      Reproduce the structure and attributes of the origin files as exactly
+	      as possible: this includes copying subdirectories, symlinks, special
+	      files, ownership and permissions.  (@xref{Attributes to
+	      copy}.)
+	    </para>
+	  </listitem>
+	</varlistentry>
+      </variablelist>
+
+
+	
+      <para><option>-v </option>
+      
+      <para><option>-z</option>
+	Compress network traffic, using a modified version of the
+	@command{zlib} library.</para>
+      
+      <para><option>-P</option>
+	Display a progress indicator while files are transferred.  This should
+	normally be ommitted if rsync is not run on a terminal.
+      </para>
+    </section>
+
+
+
+
+    <section>
+      <title>Local and remote</title>
+      
+      <para>There are six different ways of using rsync. They
+      are:</para>
+
+      
+
+      <!-- one of (CALLOUTLIST GLOSSLIST ITEMIZEDLIST ORDEREDLIST SEGMENTEDLIST SIMPLELIST VARIABLELIST CAUTION IMPORTANT NOTE TIP WARNING LITERALLAYOUT PROGRAMLISTING PROGRAMLISTINGCO SCREEN SCREENCO SCREENSHOT SYNOPSIS CMDSYNOPSIS FUNCSYNOPSIS CLASSSYNOPSIS FIELDSYNOPSIS CONSTRUCTORSYNOPSIS DESTRUCTORSYNOPSIS METHODSYNOPSIS FORMALPARA PARA SIMPARA ADDRESS BLOCKQUOTE GRAPHIC GRAPHICCO MEDIAOBJECT MEDIAOBJECTCO INFORMALEQUATION INFORMALEXAMPLE INFORMALFIGURE INFORMALTABLE EQUATION EXAMPLE FIGURE TABLE MSGSET PROCEDURE SIDEBAR QANDASET ANCHOR BRIDGEHEAD REMARK HIGHLIGHTS ABSTRACT AUTHORBLURB EPIGRAPH INDEXTERM REFENTRY SECTION) -->
+      <orderedlist>
+	<listitem>
+	  <para>
+	    for copying local files. This is invoked when neither
+	    source nor destination path contains a @code{:} separator
+
+	<listitem>
+	  <para>
+	    for copying from the local machine to a remote machine using
+	    a remote shell program as the transport (such as rsh or
+	    ssh). This is invoked when the destination path contains a
+	    single @code{:} separator.
+
+	<listitem>
+	  <para>
+	    for copying from a remote machine to the local machine
+	    using a remote shell program. This is invoked when the source
+	    contains a @code{:} separator.
+
+	<listitem>
+	  <para>
+	    for copying from a remote rsync server to the local
+	    machine. This is invoked when the source path contains a @code{::}
+	    separator or a @code{rsync://} URL.
+
+	<listitem>
+	  <para>
+	    for copying from the local machine to a remote rsync
+	    server. This is invoked when the destination path contains a @code{::}
+	    separator.
+
+	<listitem>
+	  <para>
+	    for listing files on a remote machine. This is done the
+	    same way as rsync transfers except that you leave off the
+	    local destination.  
+
+	</listitem>
+      </orderedlist>
+	  <para>
+Note that in all cases (other than listing) at least one of the source
+and destination paths must be local.
+
+	  <para>
+Any one invocation of rsync makes a copy in a single direction.  rsync
+currently has no equivalent of @command{ftp}'s interactive mode.
+
+@cindex @sc{nfs}
+@cindex network filesystems
+@cindex remote filesystems
+
+	  <para>
+rsync's network protocol is generally faster at copying files than
+network filesystems such as @sc{nfs} or @sc{cifs}.  It is better to
+run rsync on the file server either as a daemon or over ssh than
+running rsync giving the network directory.
+      </para>
+    </section>
+  </chapter>
+
+
+
+  <chapter>
+    <title>Frequently asked questions</title>
+
+    
+    <!-- one of (CALLOUTLIST GLOSSLIST ITEMIZEDLIST ORDEREDLIST SEGMENTEDLIST SIMPLELIST VARIABLELIST CAUTION IMPORTANT NOTE TIP WARNING LITERALLAYOUT PROGRAMLISTING PROGRAMLISTINGCO SCREEN SCREENCO SCREENSHOT SYNOPSIS CMDSYNOPSIS FUNCSYNOPSIS CLASSSYNOPSIS FIELDSYNOPSIS CONSTRUCTORSYNOPSIS DESTRUCTORSYNOPSIS METHODSYNOPSIS FORMALPARA PARA SIMPARA ADDRESS BLOCKQUOTE GRAPHIC GRAPHICCO MEDIAOBJECT MEDIAOBJECTCO INFORMALEQUATION INFORMALEXAMPLE INFORMALFIGURE INFORMALTABLE EQUATION EXAMPLE FIGURE TABLE MSGSET PROCEDURE SIDEBAR QANDASET ANCHOR BRIDGEHEAD REMARK HIGHLIGHTS ABSTRACT AUTHORBLURB EPIGRAPH INDEXTERM SECTION SIMPLESECT REFENTRY SECT1) -->
+    <qandaset>
+      <!-- one of (QANDADIV QANDAENTRY) -->
+
+      <qandaentry>
+	<question>
+	  <!-- one of (CALLOUTLIST GLOSSLIST ITEMIZEDLIST ORDEREDLIST
+	  SEGMENTEDLIST SIMPLELIST VARIABLELIST CAUTION IMPORTANT NOTE
+	  TIP WARNING LITERALLAYOUT PROGRAMLISTING PROGRAMLISTINGCO
+	  SCREEN SCREENCO SCREENSHOT SYNOPSIS CMDSYNOPSIS FUNCSYNOPSIS
+	  CLASSSYNOPSIS FIELDSYNOPSIS CONSTRUCTORSYNOPSIS
+	  DESTRUCTORSYNOPSIS METHODSYNOPSIS FORMALPARA PARA SIMPARA
+	  ADDRESS BLOCKQUOTE GRAPHIC GRAPHICCO MEDIAOBJECT
+	  MEDIAOBJECTCO INFORMALEQUATION INFORMALEXAMPLE
+	  INFORMALFIGURE INFORMALTABLE EQUATION EXAMPLE FIGURE TABLE
+	  PROCEDURE ANCHOR BRIDGEHEAD REMARK HIGHLIGHTS INDEXTERM) -->
+	  <para>Are there mailing lists for rsync?
+	</question>
+
+	<answer>
+	  <para>Yes, and you can subscribe and unsubscribe through a
+	  web interface at
+	    <ulink
+	      url="http://lists.samba.org/">http://lists.samba.org/</ulink>
+	  </para>
+
+	  <para>
+	    If you are having trouble with the mailing list, please
+	    send mail to the administrator
+	    
+	    <email>rsync-admin@lists.samba.org</email>
+
+	    not to the list itself.
+	  </para>
+
+	  <para>
+	    The mailing list archives are searchable.  Use 
+	    <ulink url="http://google.com/">Google</ulink> and prepend
+	    the search with <userinput>site:lists.samba.org
+	    rsync</userinput>, plus relevant keywords.
+	  </para>
+	</answer>
+      </qandaentry>
+
+
+      <qandaentry>
+	<question>
+	  <para>
+	    Why is rsync so much bigger when I build it with
+	    <command>gcc</command>?
+	  </para>
+	</question>
+	<answer>
+	  <para>
+	    On gcc, rsync builds by default with debug symbols
+	    included.  If you strip both executables, they should end
+	    up about the same size.  (Use <command>make
+	    install-strip</command>.)
+	  </para>
+	</answer>
+      </qandaentry>
+
+      
+      <qandaentry>
+	<question>
+	  <para>Is rsync useful for a single large file like an ISO image?</para>
+	</question>
+	<answer>
+	  <para>
+	    Yes, but note the following:
+
+	  <para>
+   Background: A common use of rsync is to update a file (or set of files) in one location from a more
+   correct or up-to-date copy in another location, taking advantage of portions of the files that are
+   identical to speed up the process. (Note that rsync will transfer a file in its entirety if no copy
+   exists at the destination.)
+
+	  <para>
+   (This discussion is written in terms of updating a local copy of a file from a correct file in a
+   remote location, although rsync can work in either direction.)
+
+	  <para>
+   The file to be updated (the local file) must be in a destination directory that has enough space for
+   two copies of the file. (In addition, keep an extra copy of the file to be updated in a different
+   location for safety -- see the discussion (below) about rsync's behavior when the rsync process is
+   interrupted before completion.)
+
+	  <para>
+   The local file must have the same name as the remote file being sync'd to (I think?). If you are
+   trying to upgrade an iso from, for example, beta1 to beta2, rename the local file to the same name
+   as the beta2 file. *(This is a useful thing to do -- only the changed portions will be
+   transmitted.)*
+
+	  <para>
+   The extra copy of the local file kept in a different location is because of rsync's behavior if
+   interrupted before completion:
+
+	  <para>
+   * If you specify the --partial option and rsync is interrupted, rsync will save the partially
+   rsync'd file and throw away the original local copy. (The partially rsync'd file is correct but
+   truncated.) If rsync is restarted, it will not have a local copy of the file to check for duplicate
+   blocks beyond the section of the file that has already been rsync'd, thus the remainder of the rsync
+   process will be a "pure transfer" of the file rather than taking advantage of the rsync algorithm.
+
+	  <para>
+   * If you don't specify the --partial option and rsync is interrupted, rsync will throw away the
+   partially rsync'd file, and, when rsync is restarted starts the rsync process over from the
+   beginning.
+
+	  <para>
+   Which of these is most desirable depends on the degree of commonality between the local and remote
+   copies of the file *and how much progress was made before the interruption*.
+
+	  <para>
+   The ideal approach after an interruption would be to create a new file by taking the original file
+   and deleting a portion equal in size to the portion already rsync'd and then appending *the
+   remaining* portion to the portion of the file that has already been rsync'd. (There has been some
+   discussion about creating an option to do this automatically.)
+
+   The --compare-dest option is useful when transferring multiple files, but is of no benefit in
+   transferring a single file. (AFAIK)
+
+   *Other potentially useful information can be found at:
+   -[3]http://twiki.org/cgi-bin/view/Wikilearn/RsyncingALargeFile
+
+   This answer, formatted with "real" bullets, can be found at:
+   -[4]http://twiki.org/cgi-bin/view/Wikilearn/RsyncingALargeFileFAQ*
+
+	  </para>
+	</answer>
+      </qandaentry>
+    </qandaset>
+  </chapter>
+
+
+  <appendix>
+    <title>Other Resources</title>
+    
+    <para><ulink url="http://www.ccp14.ac.uk/ccp14admin/rsync/"></ulink></para>
+  </appendix>
+</book>

errcode.h

@@ -1,18 +1,64 @@
-/* error codes returned by rsync */
+/*
+ * Error codes returned by rsync.
+ *
+ * Copyright (C) 1998-2000 Andrew Tridgell
+ * Copyright (C) 2003-2008 Wayne Davison
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, visit the http://fsf.org website.
+ */
 
+/* If you change these, please also update the string mappings in log.c and
+ * the EXIT VALUES in rsync.yo. */
+
+#define RERR_OK         0
 #define RERR_SYNTAX     1       /* syntax or usage error */
 #define RERR_PROTOCOL   2       /* protocol incompatibility */
 #define RERR_FILESELECT 3       /* errors selecting input/output files, dirs */
-#define RERR_UNSUPPORTED 4       /* requested action not supported */
+#define RERR_UNSUPPORTED 4      /* requested action not supported */
+#define RERR_STARTCLIENT 5      /* error starting client-server protocol */
 
 #define RERR_SOCKETIO   10      /* error in socket IO */
 #define RERR_FILEIO     11      /* error in file IO */
 #define RERR_STREAMIO   12      /* error in rsync protocol data stream */
 #define RERR_MESSAGEIO  13      /* errors with program diagnostics */
 #define RERR_IPC        14      /* error in IPC code */
+#define RERR_CRASHED    15      /* sibling crashed */
+#define RERR_TERMINATED 16      /* sibling terminated abnormally */
 
-#define RERR_SIGNAL     20      /* status returned when sent SIGUSR1, SIGINT */
+#define RERR_SIGNAL1    19      /* status returned when sent SIGUSR1 */
+#define RERR_SIGNAL     20      /* status returned when sent SIGINT, SIGTERM, SIGHUP */
 #define RERR_WAITCHILD  21      /* some error returned by waitpid() */
 #define RERR_MALLOC     22      /* error allocating core memory buffers */
+#define RERR_PARTIAL    23      /* partial transfer */
+#define RERR_VANISHED   24      /* file(s) vanished on sender side */
+#define RERR_DEL_LIMIT  25      /* skipped some deletes due to --max-delete */
 
 #define RERR_TIMEOUT    30      /* timeout in data send/receive */
+#define RERR_CONTIMEOUT 35      /* timeout waiting for daemon connection */
+
+/* Although it doesn't seem to be specified anywhere,
+ * ssh and the shell seem to return these values:
+ *
+ * 124 if the command exited with status 255
+ * 125 if the command is killed by a signal
+ * 126 if the command cannot be run
+ * 127 if the command is not found
+ *
+ * and we could use this to give a better explanation if the remote
+ * command is not found.
+ */
+#define RERR_CMD_FAILED 124
+#define RERR_CMD_KILLED 125
+#define RERR_CMD_RUN 126
+#define RERR_CMD_NOTFOUND 127

fileio.c

@@ -1,87 +1,145 @@
-/* 
-   Copyright (C) Andrew Tridgell 1998
-   
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2 of the License, or
-   (at your option) any later version.
-   
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-   
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
 /*
-  File IO utilities used in rsync 
-  */
+ * File IO utilities used in rsync.
+ *
+ * Copyright (C) 1998 Andrew Tridgell
+ * Copyright (C) 2002 Martin Pool
+ * Copyright (C) 2004-2008 Wayne Davison
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, visit the http://fsf.org website.
+ */
+
 #include "rsync.h"
 
-static char last_byte;
-static int last_sparse;
+#ifndef ENODATA
+#define ENODATA EAGAIN
+#endif
+
 extern int sparse_files;
 
+static char last_byte;
+static size_t sparse_seek = 0;
+
 int sparse_end(int f)
 {
-	if (last_sparse) {
-		do_lseek(f,-1,SEEK_CUR);
-		return (write(f,&last_byte,1) == 1 ? 0 : -1);
-	}
-	last_sparse = 0;
-	return 0;
+	int ret;
+
+	if (!sparse_seek)
+		return 0;
+
+	do_lseek(f, sparse_seek-1, SEEK_CUR);
+	sparse_seek = 0;
+
+	do {
+		ret = write(f, "", 1);
+	} while (ret < 0 && errno == EINTR);
+
+	return ret <= 0 ? -1 : 0;
 }
 
 
-static int write_sparse(int f,char *buf,int len)
+static int write_sparse(int f, char *buf, size_t len)
 {
-	int l1=0,l2=0;
+	size_t l1 = 0, l2 = 0;
 	int ret;
 
-	for (l1=0;l1<len && buf[l1]==0;l1++) ;
-	for (l2=0;l2<(len-l1) && buf[len-(l2+1)]==0;l2++) ;
+	for (l1 = 0; l1 < len && buf[l1] == 0; l1++) {}
+	for (l2 = 0; l2 < len-l1 && buf[len-(l2+1)] == 0; l2++) {}
 
+	/* XXX Riddle me this: why does this function SLOW DOWN when I
+	 * remove the following (unneeded) line?? Core Duo weirdness? */
 	last_byte = buf[len-1];
 
-	if (l1 == len || l2 > 0)
-		last_sparse=1;
+	sparse_seek += l1;
 
-	if (l1 > 0) {
-		do_lseek(f,l1,SEEK_CUR);  
-	}
-
-	if (l1 == len) 
+	if (l1 == len)
 		return len;
 
-	if ((ret=write(f,buf+l1,len-(l1+l2))) != len-(l1+l2)) {
-		if (ret == -1 || ret == 0) return ret;
-		return (l1+ret);
+	if (sparse_seek)
+		do_lseek(f, sparse_seek, SEEK_CUR);
+	sparse_seek = l2;
+
+	while ((ret = write(f, buf + l1, len - (l1+l2))) <= 0) {
+		if (ret < 0 && errno == EINTR)
+			continue;
+		return ret;
 	}
 
-	if (l2 > 0)
-		do_lseek(f,l2,SEEK_CUR);
-	
+	if (ret != (int)(len - (l1+l2)))
+		return l1+ret;
+
 	return len;
 }
 
 
+static char *wf_writeBuf;
+static size_t wf_writeBufSize;
+static size_t wf_writeBufCnt;
 
-int write_file(int f,char *buf,int len)
+int flush_write_file(int f)
+{
+	int ret = 0;
+	char *bp = wf_writeBuf;
+
+	while (wf_writeBufCnt > 0) {
+		if ((ret = write(f, bp, wf_writeBufCnt)) < 0) {
+			if (errno == EINTR)
+				continue;
+			return ret;
+		}
+		wf_writeBufCnt -= ret;
+		bp += ret;
+	}
+	return ret;
+}
+
+
+/*
+ * write_file does not allow incomplete writes.  It loops internally
+ * until len bytes are written or errno is set.
+ */
+int write_file(int f,char *buf,size_t len)
 {
 	int ret = 0;
 
-	if (!sparse_files) {
-		return write(f,buf,len);
-	}
-
-	while (len>0) {
-		int len1 = MIN(len, SPARSE_WRITE_SIZE);
-		int r1 = write_sparse(f, buf, len1);
+	while (len > 0) {
+		int r1;
+		if (sparse_files > 0) {
+			int len1 = MIN(len, SPARSE_WRITE_SIZE);
+			r1 = write_sparse(f, buf, len1);
+		} else {
+			if (!wf_writeBuf) {
+				wf_writeBufSize = WRITE_SIZE * 8;
+				wf_writeBufCnt  = 0;
+				wf_writeBuf = new_array(char, wf_writeBufSize);
+				if (!wf_writeBuf)
+					out_of_memory("write_file");
+			}
+			r1 = MIN(len, wf_writeBufSize - wf_writeBufCnt);
+			if (r1) {
+				memcpy(wf_writeBuf + wf_writeBufCnt, buf, r1);
+				wf_writeBufCnt += r1;
+			}
+			if (wf_writeBufCnt == wf_writeBufSize) {
+				if (flush_write_file(f) < 0)
+					return -1;
+				if (!r1 && len)
+					continue;
+			}
+		}
 		if (r1 <= 0) {
-			if (ret > 0) return ret;
+			if (ret > 0)
+				return ret;
 			return r1;
 		}
 		len -= r1;
@@ -92,80 +150,71 @@ int write_file(int f,char *buf,int len)
 }
 
 
-
-/* this provides functionality somewhat similar to mmap() but using
-   read(). It gives sliding window access to a file. mmap() is not
-   used because of the possibility of another program (such as a
-   mailer) truncating the file thus giving us a SIGBUS */
-struct map_struct *map_file(int fd,OFF_T len)
+/* This provides functionality somewhat similar to mmap() but using read().
+ * It gives sliding window access to a file.  mmap() is not used because of
+ * the possibility of another program (such as a mailer) truncating the
+ * file thus giving us a SIGBUS. */
+struct map_struct *map_file(int fd, OFF_T len, int32 read_size,
+			    int32 blk_size)
 {
 	struct map_struct *map;
-	map = (struct map_struct *)malloc(sizeof(*map));
-	if (!map) out_of_memory("map_file");
+
+	if (!(map = new0(struct map_struct)))
+		out_of_memory("map_file");
+
+	if (blk_size && (read_size % blk_size))
+		read_size += blk_size - (read_size % blk_size);
 
 	map->fd = fd;
 	map->file_size = len;
-	map->p = NULL;
-	map->p_size = 0;
-	map->p_offset = 0;
-	map->p_fd_offset = 0;
-	map->p_len = 0;
+	map->def_window_size = read_size;
 
 	return map;
 }
 
+
 /* slide the read window in the file */
-char *map_ptr(struct map_struct *map,OFF_T offset,int len)
+char *map_ptr(struct map_struct *map, OFF_T offset, int32 len)
 {
-	int nread;
+	int32 nread;
 	OFF_T window_start, read_start;
-	int window_size, read_size, read_offset;
+	int32 window_size, read_size, read_offset;
 
-	if (len == 0) {
+	if (len == 0)
 		return NULL;
-	}
-
-	/* can't go beyond the end of file */
-	if (len > (map->file_size - offset)) {
-		len = map->file_size - offset;
+	if (len < 0) {
+		rprintf(FERROR, "invalid len passed to map_ptr: %ld\n",
+			(long)len);
+		exit_cleanup(RERR_FILEIO);
 	}
 
 	/* in most cases the region will already be available */
-	if (offset >= map->p_offset && 
-	    offset+len <= map->p_offset+map->p_len) {
-		return (map->p + (offset - map->p_offset));
-	}
-
+	if (offset >= map->p_offset && offset+len <= map->p_offset+map->p_len)
+		return map->p + (offset - map->p_offset);
 
 	/* nope, we are going to have to do a read. Work out our desired window */
-	if (offset > 2*CHUNK_SIZE) {
-		window_start = offset - 2*CHUNK_SIZE;
-		window_start &= ~((OFF_T)(CHUNK_SIZE-1)); /* assumes power of 2 */
-	} else {
-		window_start = 0;
-	}
-	window_size = MAX_MAP_SIZE;
-	if (window_start + window_size > map->file_size) {
-		window_size = map->file_size - window_start;
-	}
-	if (offset + len > window_start + window_size) {
-		window_size = (offset+len) - window_start;
-	}
+	window_start = offset;
+	window_size = map->def_window_size;
+	if (window_start + window_size > map->file_size)
+		window_size = (int32)(map->file_size - window_start);
+	if (len > window_size)
+		window_size = len;
 
 	/* make sure we have allocated enough memory for the window */
 	if (window_size > map->p_size) {
-		map->p = (char *)Realloc(map->p, window_size);
-		if (!map->p) out_of_memory("map_ptr");
+		map->p = realloc_array(map->p, char, window_size);
+		if (!map->p)
+			out_of_memory("map_ptr");
 		map->p_size = window_size;
 	}
 
-	/* now try to avoid re-reading any bytes by reusing any bytes from the previous
-	   buffer. */
+	/* Now try to avoid re-reading any bytes by reusing any bytes
+	 * from the previous buffer. */
 	if (window_start >= map->p_offset &&
 	    window_start < map->p_offset + map->p_len &&
 	    window_start + window_size >= map->p_offset + map->p_len) {
 		read_start = map->p_offset + map->p_len;
-		read_offset = read_start - window_start;
+		read_offset = (int32)(read_start - window_start);
 		read_size = window_size - read_offset;
 		memmove(map->p, map->p + (map->p_len - read_offset), read_offset);
 	} else {
@@ -175,39 +224,53 @@ char *map_ptr(struct map_struct *map,OFF_T offset,int len)
 	}
 
 	if (read_size <= 0) {
-		rprintf(FINFO,"Warning: unexpected read size of %d in map_ptr\n", read_size);
-	} else {
-		if (map->p_fd_offset != read_start) {
-			if (do_lseek(map->fd,read_start,SEEK_SET) != read_start) {
-				rprintf(FERROR,"lseek failed in map_ptr\n");
-				exit_cleanup(RERR_FILEIO);
-			}
-			map->p_fd_offset = read_start;
-		}
-
-		if ((nread=read(map->fd,map->p + read_offset,read_size)) != read_size) {
-			if (nread < 0) nread = 0;
-			/* the best we can do is zero the buffer - the file
-			   has changed mid transfer! */
-			memset(map->p+read_offset+nread, 0, read_size - nread);
-		}
-		map->p_fd_offset += nread;
+		rprintf(FERROR, "invalid read_size of %ld in map_ptr\n",
+			(long)read_size);
+		exit_cleanup(RERR_FILEIO);
 	}
 
+	if (map->p_fd_offset != read_start) {
+		OFF_T ret = do_lseek(map->fd, read_start, SEEK_SET);
+		if (ret != read_start) {
+			rsyserr(FERROR, errno, "lseek returned %.0f, not %.0f",
+				(double)ret, (double)read_start);
+			exit_cleanup(RERR_FILEIO);
+		}
+		map->p_fd_offset = read_start;
+	}
 	map->p_offset = window_start;
 	map->p_len = window_size;
-  
-	return map->p + (offset - map->p_offset); 
+
+	while (read_size > 0) {
+		nread = read(map->fd, map->p + read_offset, read_size);
+		if (nread <= 0) {
+			if (!map->status)
+				map->status = nread ? errno : ENODATA;
+			/* The best we can do is zero the buffer -- the file
+			 * has changed mid transfer! */
+			memset(map->p + read_offset, 0, read_size);
+			break;
+		}
+		map->p_fd_offset += nread;
+		read_offset += nread;
+		read_size -= nread;
+	}
+
+	return map->p;
 }
 
 
-void unmap_file(struct map_struct *map)
+int unmap_file(struct map_struct *map)
 {
+	int	ret;
+
 	if (map->p) {
 		free(map->p);
 		map->p = NULL;
 	}
-	memset(map, 0, sizeof(*map));
+	ret = map->status;
+	memset(map, 0, sizeof map[0]);
 	free(map);
-}
 
+	return ret;
+}

getfsdev.c

@@ -0,0 +1,23 @@
+#include "rsync.h"
+
+ int main(int argc, char *argv[])
+{
+	STRUCT_STAT st;
+	int ret;
+
+	while (--argc > 0) {
+#ifdef USE_STAT64_FUNCS
+		ret = stat64(*++argv, &st);
+#else
+		ret = stat(*++argv, &st);
+#endif
+		if (ret < 0) {
+			fprintf(stderr, "Unable to stat `%s'\n", *argv);
+			exit(1);
+		}
+		printf("%ld/%ld\n", (long)major(st.st_dev),
+				    (long)minor(st.st_dev));
+	}
+
+	return 0;
+}

getgroups.c

@@ -0,0 +1,62 @@
+/*
+ * Print out the gids of all groups for the current user.  This is like
+ * `id -G` on Linux, but it's too hard to find a portable equivalent.
+ *
+ * Copyright (C) 2002 Martin Pool
+ * Copyright (C) 2003-2008 Wayne Davison
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 3 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, visit the http://fsf.org website.
+ */
+
+#include "rsync.h"
+
+int
+main(UNUSED(int argc), UNUSED(char *argv[]))
+{
+	int n, i;
+	gid_t *list;
+	gid_t gid = MY_GID();
+	int gid_in_list = 0;
+
+#ifdef HAVE_GETGROUPS
+	if ((n = getgroups(0, NULL)) < 0) {
+		perror("getgroups");
+		return 1;
+	}
+#else
+	n = 0;
+#endif
+
+	list = (gid_t*)malloc(sizeof (gid_t) * (n + 1));
+	if (!list) {
+		fprintf(stderr, "out of memory!\n");
+		exit(1);
+	}
+
+#ifdef HAVE_GETGROUPS
+	if (n > 0)
+		n = getgroups(n, list);
+#endif
+
+	for (i = 0; i < n; i++)  {
+		printf("%lu ", (unsigned long)list[i]);
+		if (list[i] == gid)
+			gid_in_list = 1;
+	}
+	/* The default gid might not be in the list on some systems. */
+	if (!gid_in_list)
+		printf("%lu", (unsigned long)gid);
+	printf("\n");
+
+	return 0;
+}

hashtable.c

@@ -0,0 +1,146 @@
+/*
+ * Routines to provide a memory-efficient hashtable.
+ *
+ * Copyright (C) 2007-2008 Wayne Davison
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, visit the http://fsf.org website.
+ */
+
+#include "rsync.h"
+
+#define HASH_LOAD_LIMIT(size) ((size)*3/4)
+
+struct hashtable *hashtable_create(int size, int key64)
+{
+	struct hashtable *tbl;
+	int node_size = key64 ? sizeof (struct ht_int64_node)
+			      : sizeof (struct ht_int32_node);
+
+	/* Pick a power of 2 that can hold the requested size. */
+	if (size & (size-1) || size < 16) {
+		int req = size;
+		size = 16;
+		while (size < req)
+			size *= 2;
+	}
+
+	if (!(tbl = new(struct hashtable))
+	 || !(tbl->nodes = new_array0(char, size * node_size)))
+		out_of_memory("hashtable_create");
+	tbl->size = size;
+	tbl->entries = 0;
+	tbl->node_size = node_size;
+	tbl->key64 = key64;
+
+	return tbl;
+}
+
+void hashtable_destroy(struct hashtable *tbl)
+{
+	free(tbl->nodes);
+	free(tbl);
+}
+
+/* This returns the node for the indicated key, either newly created or
+ * already existing.  Returns NULL if not allocating and not found. */
+void *hashtable_find(struct hashtable *tbl, int64 key, int allocate_if_missing)
+{
+	int key64 = tbl->key64;
+	struct ht_int32_node *node;
+	uint32 ndx;
+
+	if (allocate_if_missing && tbl->entries > HASH_LOAD_LIMIT(tbl->size)) {
+		void *old_nodes = tbl->nodes;
+		int size = tbl->size * 2;
+		int i;
+
+		if (!(tbl->nodes = new_array0(char, size * tbl->node_size)))
+			out_of_memory("hashtable_node");
+		tbl->size = size;
+		tbl->entries = 0;
+
+		for (i = size / 2; i-- > 0; ) {
+			struct ht_int32_node *move_node = HT_NODE(tbl, old_nodes, i);
+			int64 move_key = HT_KEY(move_node, key64);
+			if (move_key == 0)
+				continue;
+			node = hashtable_find(tbl, move_key, 1);
+			node->data = move_node->data;
+		}
+
+		free(old_nodes);
+	}
+
+	if (!key64) {
+		/* Based on Jenkins One-at-a-time hash. */
+		uchar buf[4], *keyp = buf;
+		int i;
+
+		SIVAL(buf, 0, key);
+		for (ndx = 0, i = 0; i < 4; i++) {
+			ndx += keyp[i];
+			ndx += (ndx << 10);
+			ndx ^= (ndx >> 6);
+		}
+		ndx += (ndx << 3);
+		ndx ^= (ndx >> 11);
+		ndx += (ndx << 15);
+	} else {
+		/* Based on Jenkins hashword() from lookup3.c. */
+		uint32 a, b, c;
+
+		/* Set up the internal state */
+		a = b = c = 0xdeadbeef + (8 << 2);
+
+#define rot(x,k) (((x)<<(k)) ^ ((x)>>(32-(k))))
+		b += (uint32)(key >> 32);
+		a += (uint32)key;
+		c ^= b; c -= rot(b, 14);
+		a ^= c; a -= rot(c, 11);
+		b ^= a; b -= rot(a, 25);
+		c ^= b; c -= rot(b, 16);
+		a ^= c; a -= rot(c, 4);
+		b ^= a; b -= rot(a, 14);
+		c ^= b; c -= rot(b, 24);
+#undef rot
+		ndx = c;
+	}
+
+	/* If it already exists, return the node.  If we're not
+	 * allocating, return NULL if the key is not found. */
+	while (1) {
+		int64 nkey;
+
+		ndx &= tbl->size - 1;
+		node = HT_NODE(tbl, tbl->nodes, ndx);
+		nkey = HT_KEY(node, key64);
+
+		if (nkey == key)
+			return node;
+		if (nkey == 0) {
+			if (!allocate_if_missing)
+				return NULL;
+			break;
+		}
+		ndx++;
+	}
+
+	/* Take over this empty spot and then return the node. */
+	if (key64)
+		((struct ht_int64_node*)node)->key = key;
+	else
+		node->key = key;
+	tbl->entries++;
+	return node;
+}

hlink.c

@@ -1,156 +1,531 @@
-/* 
-   Copyright (C) Andrew Tridgell 1996
-   Copyright (C) Paul Mackerras 1996
-   
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2 of the License, or
-   (at your option) any later version.
-   
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-   
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
+/*
+ * Routines to support hard-linking.
+ *
+ * Copyright (C) 1996 Andrew Tridgell
+ * Copyright (C) 1996 Paul Mackerras
+ * Copyright (C) 2002 Martin Pool <mbp@samba.org>
+ * Copyright (C) 2004-2008 Wayne Davison
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, visit the http://fsf.org website.
+ */
 
 #include "rsync.h"
 
-extern int dry_run;
 extern int verbose;
+extern int dry_run;
+extern int list_only;
+extern int am_sender;
+extern int inc_recurse;
+extern int do_xfers;
+extern int link_dest;
+extern int preserve_acls;
+extern int make_backups;
+extern int protocol_version;
+extern int remove_source_files;
+extern int stdout_format_has_i;
+extern int maybe_ATTRS_REPORT;
+extern int unsort_ndx;
+extern char *basis_dir[];
+extern struct file_list *cur_flist;
 
-#if SUPPORT_HARD_LINKS
-static int hlink_compare(struct file_struct *f1,struct file_struct *f2)
+#ifdef SUPPORT_HARD_LINKS
+
+/* Starting with protocol 30, we use a simple hashtable on the sending side
+ * for hashing the st_dev and st_ino info.  The receiving side gets told
+ * (via flags and a "group index") which items are hard-linked together, so
+ * we can avoid the pool of dev+inode data.  For incremental recursion mode,
+ * the receiver will use a ndx hash to remember old pathnames. */
+
+static struct hashtable *dev_tbl;
+
+static struct hashtable *prior_hlinks;
+
+static struct file_list *hlink_flist;
+
+void init_hard_links(void)
 {
-  if (!S_ISREG(f1->mode) && !S_ISREG(f2->mode)) return 0;
-  if (!S_ISREG(f1->mode)) return -1;
-  if (!S_ISREG(f2->mode)) return 1;
-
-  if (f1->dev != f2->dev) 
-    return (int)(f1->dev>f2->dev?1:-1);
-
-  if (f1->inode != f2->inode) 
-    return (int)(f1->inode>f2->inode?1:-1);
-
-  return file_compare(&f1,&f2);
+	if (am_sender || protocol_version < 30)
+		dev_tbl = hashtable_create(16, SIZEOF_INT64 == 8);
+	else if (inc_recurse)
+		prior_hlinks = hashtable_create(1024, 0);
 }
 
-
-static struct file_struct *hlink_list;
-static int hlink_count;
-#endif
-
-void init_hard_links(struct file_list *flist)
+struct ht_int64_node *idev_find(int64 dev, int64 ino)
+{
+	static struct ht_int64_node *dev_node = NULL;
+	struct hashtable *tbl;
+
+	if (!dev_node || dev_node->key != dev) {
+		/* We keep a separate hash table of inodes for every device. */
+		dev_node = hashtable_find(dev_tbl, dev, 1);
+		if (!(tbl = dev_node->data))
+			tbl = dev_node->data = hashtable_create(512, SIZEOF_INT64 == 8);
+	} else
+		tbl = dev_node->data;
+
+	return hashtable_find(tbl, ino, 1);
+}
+
+void idev_destroy(void)
 {
-#if SUPPORT_HARD_LINKS
 	int i;
-	if (flist->count < 2) return;
 
-	if (hlink_list) free(hlink_list);
-    
-	if (!(hlink_list = 
-	      (struct file_struct *)malloc(sizeof(hlink_list[0])*flist->count)))
-		out_of_memory("init_hard_links");
+	for (i = 0; i < dev_tbl->size; i++) {
+		struct ht_int32_node *node = HT_NODE(dev_tbl, dev_tbl->nodes, i);
+		if (node->data)
+			hashtable_destroy(node->data);
+	}
 
-	for (i = 0; i < flist->count; i++)
-		memcpy(&hlink_list[i], flist->files[i], sizeof(hlink_list[0]));
-
-	qsort(hlink_list,flist->count,
-	      sizeof(hlink_list[0]),
-	      (int (*)())hlink_compare);
-
-	hlink_count=flist->count;
-#endif
+	hashtable_destroy(dev_tbl);
 }
 
-/* check if a file should be skipped because it is the same as an
-   earlier hard link */
-int check_hard_link(struct file_struct *file)
+static int hlink_compare_gnum(int *int1, int *int2)
 {
-#if SUPPORT_HARD_LINKS
-  int low=0,high=hlink_count-1;
-  int ret=0;
+	struct file_struct *f1 = hlink_flist->sorted[*int1];
+	struct file_struct *f2 = hlink_flist->sorted[*int2];
+	int32 gnum1 = F_HL_GNUM(f1);
+	int32 gnum2 = F_HL_GNUM(f2);
 
-  if (!hlink_list || !S_ISREG(file->mode)) return 0;
+	if (gnum1 != gnum2)
+		return gnum1 > gnum2 ? 1 : -1;
 
-  while (low != high) {
-    int mid = (low+high)/2;
-    ret = hlink_compare(&hlink_list[mid],file);
-    if (ret == 0) {
-	    low = mid;
-	    break;
-    }
-    if (ret > 0) 
-      high=mid;
-    else
-      low=mid+1;
-  }
-
-  if (hlink_compare(&hlink_list[low],file) != 0) return 0;
-
-  if (low > 0 &&
-      S_ISREG(hlink_list[low-1].mode) &&
-      file->dev == hlink_list[low-1].dev &&
-      file->inode == hlink_list[low-1].inode)
-    return 1;
-#endif
-
-  return 0;
+	return *int1 > *int2 ? 1 : -1;
 }
 
-
-#if SUPPORT_HARD_LINKS
-static void hard_link_one(int i)
+static void match_gnums(int32 *ndx_list, int ndx_count)
 {
-	STRUCT_STAT st1,st2;
+	int32 from, prev;
+	struct file_struct *file, *file_next;
+	struct ht_int32_node *node = NULL;
+	int32 gnum, gnum_next;
 
-	if (link_stat(f_name(&hlink_list[i-1]),&st1) != 0) return;
+	qsort(ndx_list, ndx_count, sizeof ndx_list[0],
+	     (int (*)()) hlink_compare_gnum);
 
-	if (link_stat(f_name(&hlink_list[i]),&st2) != 0) {
-		if (do_link(f_name(&hlink_list[i-1]),f_name(&hlink_list[i])) != 0) {
-			if (verbose > 0)
-				rprintf(FINFO,"link %s => %s : %s\n",
-					f_name(&hlink_list[i]),
-					f_name(&hlink_list[i-1]),strerror(errno));
-			return;
+	for (from = 0; from < ndx_count; from++) {
+		file = hlink_flist->sorted[ndx_list[from]];
+		gnum = F_HL_GNUM(file);
+		if (inc_recurse) {
+			node = hashtable_find(prior_hlinks, gnum, 1);
+			if (!node->data) {
+				node->data = new_array0(char, 5);
+				assert(gnum >= hlink_flist->ndx_start);
+				file->flags |= FLAG_HLINK_FIRST;
+				prev = -1;
+			} else if (CVAL(node->data, 0) == 0) {
+				struct file_list *flist;
+				prev = IVAL(node->data, 1);
+				flist = flist_for_ndx(prev);
+				if (flist)
+					flist->files[prev - flist->ndx_start]->flags &= ~FLAG_HLINK_LAST;
+				else {
+					/* We skipped all prior files in this
+					 * group, so mark this as a "first". */
+					file->flags |= FLAG_HLINK_FIRST;
+					prev = -1;
+				}
+			} else
+				prev = -1;
+		} else {
+			file->flags |= FLAG_HLINK_FIRST;
+			prev = -1;
 		}
-	} else {
-		if (st2.st_dev == st1.st_dev && st2.st_ino == st1.st_ino) return;
-		
-		if (robust_unlink(f_name(&hlink_list[i])) != 0 ||
-		    do_link(f_name(&hlink_list[i-1]),f_name(&hlink_list[i])) != 0) {
-			if (verbose > 0)
-				rprintf(FINFO,"link %s => %s : %s\n",
-					f_name(&hlink_list[i]),
-					f_name(&hlink_list[i-1]),strerror(errno));
-			return;
+		for ( ; from < ndx_count-1; file = file_next, gnum = gnum_next, from++) { /*SHARED ITERATOR*/
+			file_next = hlink_flist->sorted[ndx_list[from+1]];
+			gnum_next = F_HL_GNUM(file_next);
+			if (gnum != gnum_next)
+				break;
+			F_HL_PREV(file) = prev;
+			/* The linked list uses over-the-wire ndx values. */
+			if (unsort_ndx)
+				prev = F_NDX(file);
+			else
+				prev = ndx_list[from] + hlink_flist->ndx_start;
+		}
+		if (prev < 0 && !inc_recurse) {
+			/* Disable hard-link bit and set DONE so that
+			 * HLINK_BUMP()-dependent values are unaffected. */
+			file->flags &= ~(FLAG_HLINKED | FLAG_HLINK_FIRST);
+			file->flags |= FLAG_HLINK_DONE;
+			continue;
+		}
+
+		file->flags |= FLAG_HLINK_LAST;
+		F_HL_PREV(file) = prev;
+		if (inc_recurse && CVAL(node->data, 0) == 0) {
+			if (unsort_ndx)
+				prev = F_NDX(file);
+			else
+				prev = ndx_list[from] + hlink_flist->ndx_start;
+			SIVAL(node->data, 1, prev);
 		}
 	}
-	if (verbose > 0)
-		rprintf(FINFO,"%s => %s\n",
-			f_name(&hlink_list[i]),f_name(&hlink_list[i-1]));
 }
-#endif
 
-/* create any hard links in the flist */
-void do_hard_links(struct file_list *flist)
+/* Analyze the hard-links in the file-list by creating a list of all the
+ * items that have hlink data, sorting them, and matching up identical
+ * values into clusters.  These will be a single linked list from last
+ * to first when we're done. */
+void match_hard_links(struct file_list *flist)
 {
-#if SUPPORT_HARD_LINKS
-	int i;
-  
-	if (!hlink_list) return;
+	if (!list_only) {
+		int i, ndx_count = 0;
+		int32 *ndx_list;
 
-	for (i=1;i<hlink_count;i++) {
-		if (S_ISREG(hlink_list[i].mode) &&
-		    S_ISREG(hlink_list[i-1].mode) &&
-		    hlink_list[i].basename && hlink_list[i-1].basename &&
-		    hlink_list[i].dev == hlink_list[i-1].dev &&
-		    hlink_list[i].inode == hlink_list[i-1].inode) {
-			hard_link_one(i);
-		}	
+		if (!(ndx_list = new_array(int32, flist->used)))
+			out_of_memory("match_hard_links");
+
+		for (i = 0; i < flist->used; i++) {
+			if (F_IS_HLINKED(flist->sorted[i]))
+				ndx_list[ndx_count++] = i;
+		}
+
+		hlink_flist = flist;
+
+		if (ndx_count)
+			match_gnums(ndx_list, ndx_count);
+
+		free(ndx_list);
 	}
-#endif
+	if (protocol_version < 30)
+		idev_destroy();
 }
+
+static int maybe_hard_link(struct file_struct *file, int ndx,
+			   const char *fname, int statret, stat_x *sxp,
+			   const char *oldname, STRUCT_STAT *old_stp,
+			   const char *realname, int itemizing, enum logcode code)
+{
+	if (statret == 0) {
+		if (sxp->st.st_dev == old_stp->st_dev
+		 && sxp->st.st_ino == old_stp->st_ino) {
+			if (itemizing) {
+				itemize(fname, file, ndx, statret, sxp,
+					ITEM_LOCAL_CHANGE | ITEM_XNAME_FOLLOWS,
+					0, "");
+			}
+			if (verbose > 1 && maybe_ATTRS_REPORT)
+				rprintf(FCLIENT, "%s is uptodate\n", fname);
+			file->flags |= FLAG_HLINK_DONE;
+			return 0;
+		}
+		if (make_backups > 0) {
+			if (!make_backup(fname))
+				return -1;
+		} else if (robust_unlink(fname)) {
+			rsyserr(FERROR_XFER, errno, "unlink %s failed",
+				full_fname(fname));
+			return -1;
+		}
+	}
+
+	if (hard_link_one(file, fname, oldname, 0)) {
+		if (itemizing) {
+			itemize(fname, file, ndx, statret, sxp,
+				ITEM_LOCAL_CHANGE | ITEM_XNAME_FOLLOWS, 0,
+				realname);
+		}
+		if (code != FNONE && verbose)
+			rprintf(code, "%s => %s\n", fname, realname);
+		return 0;
+	}
+	return -1;
+}
+
+/* Figure out if a prior entry is still there or if we just have a
+ * cached name for it. */
+static char *check_prior(struct file_struct *file, int gnum,
+			 int *prev_ndx_p, struct file_list **flist_p)
+{
+	struct file_struct *fp;
+	struct ht_int32_node *node;
+	int prev_ndx = F_HL_PREV(file);
+
+	while (1) {
+		struct file_list *flist;
+		if (prev_ndx < 0
+		 || (flist = flist_for_ndx(prev_ndx)) == NULL)
+			break;
+		fp = flist->files[prev_ndx - flist->ndx_start];
+		if (!(fp->flags & FLAG_SKIP_HLINK)) {
+			*prev_ndx_p = prev_ndx;
+			*flist_p = flist;
+			return NULL;
+		}
+		F_HL_PREV(file) = prev_ndx = F_HL_PREV(fp);
+	}
+
+	if ((node = hashtable_find(prior_hlinks, gnum, 0)) != NULL) {
+		assert(node->data != NULL);
+		if (CVAL(node->data, 0) != 0) {
+			*prev_ndx_p = -1;
+			*flist_p = NULL;
+			return node->data;
+		}
+		/* The prior file must have been skipped. */
+		F_HL_PREV(file) = -1;
+	}
+
+	*prev_ndx_p = -1;
+	*flist_p = NULL;
+	return NULL;
+}
+
+/* Only called if FLAG_HLINKED is set and FLAG_HLINK_FIRST is not.  Returns:
+ * 0 = process the file, 1 = skip the file, -1 = error occurred. */
+int hard_link_check(struct file_struct *file, int ndx, const char *fname,
+		    int statret, stat_x *sxp, int itemizing,
+		    enum logcode code)
+{
+	STRUCT_STAT prev_st;
+	char namebuf[MAXPATHLEN], altbuf[MAXPATHLEN];
+	char *realname, *prev_name;
+	struct file_list *flist;
+	int gnum = inc_recurse ? F_HL_GNUM(file) : -1;
+	int prev_ndx;
+
+	prev_name = realname = check_prior(file, gnum, &prev_ndx, &flist);
+
+	if (!prev_name) {
+		struct file_struct *prev_file;
+
+		if (!flist) {
+			/* The previous file was skipped, so this one is
+			 * treated as if it were the first in its group. */
+			return 0;
+		}
+
+		prev_file = flist->files[prev_ndx - flist->ndx_start];
+
+		/* Is the previous link not complete yet? */
+		if (!(prev_file->flags & FLAG_HLINK_DONE)) {
+			/* Is the previous link being transferred? */
+			if (prev_file->flags & FLAG_FILE_SENT) {
+				/* Add ourselves to the list of files that will
+				 * be updated when the transfer completes, and
+				 * mark ourself as waiting for the transfer. */
+				F_HL_PREV(file) = F_HL_PREV(prev_file);
+				F_HL_PREV(prev_file) = ndx;
+				file->flags |= FLAG_FILE_SENT;
+				cur_flist->in_progress++;
+				return 1;
+			}
+			return 0;
+		}
+
+		/* There is a finished file to link with! */
+		if (!(prev_file->flags & FLAG_HLINK_FIRST)) {
+			/* The previous previous is FIRST when prev is not. */
+			prev_name = realname = check_prior(prev_file, gnum, &prev_ndx, &flist);
+			assert(prev_name != NULL || flist != NULL);
+			/* Update our previous pointer to point to the FIRST. */
+			F_HL_PREV(file) = prev_ndx;
+		}
+
+		if (!prev_name) {
+			int alt_dest;
+
+			prev_file = flist->files[prev_ndx - flist->ndx_start];
+			/* F_HL_PREV() is alt_dest value when DONE && FIRST. */
+			alt_dest = F_HL_PREV(prev_file);
+
+			if (alt_dest >= 0 && dry_run) {
+				pathjoin(namebuf, MAXPATHLEN, basis_dir[alt_dest],
+					 f_name(prev_file, NULL));
+				prev_name = namebuf;
+				realname = f_name(prev_file, altbuf);
+			} else {
+				prev_name = f_name(prev_file, namebuf);
+				realname = prev_name;
+			}
+		}
+	}
+
+	if (link_stat(prev_name, &prev_st, 0) < 0) {
+		rsyserr(FERROR_XFER, errno, "stat %s failed",
+			full_fname(prev_name));
+		return -1;
+	}
+
+	if (statret < 0 && basis_dir[0] != NULL) {
+		/* If we match an alt-dest item, we don't output this as a change. */
+		char cmpbuf[MAXPATHLEN];
+		stat_x alt_sx;
+		int j = 0;
+#ifdef SUPPORT_ACLS
+		alt_sx.acc_acl = alt_sx.def_acl = NULL;
+#endif
+		do {
+			pathjoin(cmpbuf, MAXPATHLEN, basis_dir[j], fname);
+			if (link_stat(cmpbuf, &alt_sx.st, 0) < 0)
+				continue;
+			if (link_dest) {
+				if (prev_st.st_dev != alt_sx.st.st_dev
+				 || prev_st.st_ino != alt_sx.st.st_ino)
+					continue;
+				statret = 1;
+				if (stdout_format_has_i == 0
+				 || (verbose < 2 && stdout_format_has_i < 2)) {
+					itemizing = 0;
+					code = FNONE;
+					if (verbose > 1 && maybe_ATTRS_REPORT)
+						rprintf(FCLIENT, "%s is uptodate\n", fname);
+				}
+				break;
+			}
+			if (!unchanged_file(cmpbuf, file, &alt_sx.st))
+				continue;
+			statret = 1;
+			if (unchanged_attrs(cmpbuf, file, &alt_sx))
+				break;
+		} while (basis_dir[++j] != NULL);
+		if (statret == 1) {
+			sxp->st = alt_sx.st;
+#ifdef SUPPORT_ACLS
+			if (preserve_acls && !S_ISLNK(file->mode)) {
+				if (!ACL_READY(*sxp))
+					get_acl(cmpbuf, sxp);
+				else {
+					sxp->acc_acl = alt_sx.acc_acl;
+					sxp->def_acl = alt_sx.def_acl;
+				}
+			}
+#endif
+		}
+#ifdef SUPPORT_ACLS
+		else if (preserve_acls)
+			free_acl(&alt_sx);
+#endif
+	}
+
+	if (maybe_hard_link(file, ndx, fname, statret, sxp, prev_name, &prev_st,
+			    realname, itemizing, code) < 0)
+		return -1;
+
+	if (remove_source_files == 1 && do_xfers)
+		send_msg_int(MSG_SUCCESS, ndx);
+
+	return 1;
+}
+
+int hard_link_one(struct file_struct *file, const char *fname,
+		  const char *oldname, int terse)
+{
+	if (do_link(oldname, fname) < 0) {
+		enum logcode code;
+		if (terse) {
+			if (!verbose)
+				return 0;
+			code = FINFO;
+		} else
+			code = FERROR_XFER;
+		rsyserr(code, errno, "link %s => %s failed",
+			full_fname(fname), oldname);
+		return 0;
+	}
+
+	file->flags |= FLAG_HLINK_DONE;
+
+	return 1;
+}
+
+void finish_hard_link(struct file_struct *file, const char *fname, int fin_ndx,
+		      STRUCT_STAT *stp, int itemizing, enum logcode code,
+		      int alt_dest)
+{
+	stat_x prev_sx;
+	STRUCT_STAT st;
+	char alt_name[MAXPATHLEN], *prev_name;
+	const char *our_name;
+	struct file_list *flist;
+	int prev_statret, ndx, prev_ndx = F_HL_PREV(file);
+
+	if (stp == NULL && prev_ndx >= 0) {
+		if (link_stat(fname, &st, 0) < 0) {
+			rsyserr(FERROR_XFER, errno, "stat %s failed",
+				full_fname(fname));
+			return;
+		}
+		stp = &st;
+	}
+
+	/* FIRST combined with DONE means we were the first to get done. */
+	file->flags |= FLAG_HLINK_FIRST | FLAG_HLINK_DONE;
+	F_HL_PREV(file) = alt_dest;
+	if (alt_dest >= 0 && dry_run) {
+		pathjoin(alt_name, MAXPATHLEN, basis_dir[alt_dest],
+			 f_name(file, NULL));
+		our_name = alt_name;
+	} else
+		our_name = fname;
+
+#ifdef SUPPORT_ACLS
+	prev_sx.acc_acl = prev_sx.def_acl = NULL;
+#endif
+
+	while ((ndx = prev_ndx) >= 0) {
+		int val;
+		flist = flist_for_ndx(ndx);
+		assert(flist != NULL);
+		file = flist->files[ndx - flist->ndx_start];
+		file->flags = (file->flags & ~FLAG_HLINK_FIRST) | FLAG_HLINK_DONE;
+		prev_ndx = F_HL_PREV(file);
+		F_HL_PREV(file) = fin_ndx;
+		prev_name = f_name(file, NULL);
+		prev_statret = link_stat(prev_name, &prev_sx.st, 0);
+		val = maybe_hard_link(file, ndx, prev_name, prev_statret, &prev_sx,
+				      our_name, stp, fname, itemizing, code);
+		flist->in_progress--;
+#ifdef SUPPORT_ACLS
+		if (preserve_acls)
+			free_acl(&prev_sx);
+#endif
+		if (val < 0)
+			continue;
+		if (remove_source_files == 1 && do_xfers)
+			send_msg_int(MSG_SUCCESS, ndx);
+	}
+
+	if (inc_recurse) {
+		int gnum = F_HL_GNUM(file);
+		struct ht_int32_node *node = hashtable_find(prior_hlinks, gnum, 0);
+		assert(node != NULL && node->data != NULL);
+		assert(CVAL(node->data, 0) == 0);
+		free(node->data);
+		if (!(node->data = strdup(our_name)))
+			out_of_memory("finish_hard_link");
+	}
+}
+
+int skip_hard_link(struct file_struct *file, struct file_list **flist_p)
+{
+	struct file_list *flist;
+	int prev_ndx;
+
+	file->flags |= FLAG_SKIP_HLINK;
+	if (!(file->flags & FLAG_HLINK_LAST))
+		return -1;
+
+	check_prior(file, F_HL_GNUM(file), &prev_ndx, &flist);
+	if (prev_ndx >= 0) {
+		file = flist->files[prev_ndx - flist->ndx_start];
+		if (file->flags & (FLAG_HLINK_DONE|FLAG_FILE_SENT))
+			return -1;
+		file->flags |= FLAG_HLINK_LAST;
+		*flist_p = flist;
+	}
+
+	return prev_ndx;
+}
+#endif

ifuncs.h

@@ -0,0 +1,110 @@
+/* Inline functions for rsync.
+ *
+ * Copyright (C) 2007-2008 Wayne Davison
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, visit the http://fsf.org website.
+ */
+
+static inline void
+alloc_xbuf(xbuf *xb, size_t sz)
+{
+	if (!(xb->buf = new_array(char, sz)))
+		out_of_memory("alloc_xbuf");
+	xb->size = sz;
+	xb->len = xb->pos = 0;
+}
+
+static inline void
+realloc_xbuf(xbuf *xb, size_t sz)
+{
+	char *bf = realloc_array(xb->buf, char, sz);
+	if (!bf)
+		out_of_memory("realloc_xbuf");
+	xb->buf = bf;
+	xb->size = sz;
+}
+
+static inline int
+to_wire_mode(mode_t mode)
+{
+#ifdef SUPPORT_LINKS
+#if _S_IFLNK != 0120000
+	if (S_ISLNK(mode))
+		return (mode & ~(_S_IFMT)) | 0120000;
+#endif
+#endif
+	return mode;
+}
+
+static inline mode_t
+from_wire_mode(int mode)
+{
+#if _S_IFLNK != 0120000
+	if ((mode & (_S_IFMT)) == 0120000)
+		return (mode & ~(_S_IFMT)) | _S_IFLNK;
+#endif
+	return mode;
+}
+
+static inline char *
+d_name(struct dirent *di)
+{
+#ifdef HAVE_BROKEN_READDIR
+	return (di->d_name - 2);
+#else
+	return di->d_name;
+#endif
+}
+
+static inline int
+isDigit(const char *ptr)
+{
+	return isdigit(*(unsigned char *)ptr);
+}
+
+static inline int
+isPrint(const char *ptr)
+{
+	return isprint(*(unsigned char *)ptr);
+}
+
+static inline int
+isSpace(const char *ptr)
+{
+	return isspace(*(unsigned char *)ptr);
+}
+
+static inline int
+isLower(const char *ptr)
+{
+	return islower(*(unsigned char *)ptr);
+}
+
+static inline int
+isUpper(const char *ptr)
+{
+	return isupper(*(unsigned char *)ptr);
+}
+
+static inline int
+toLower(const char *ptr)
+{
+	return tolower(*(unsigned char *)ptr);
+}
+
+static inline int
+toUpper(const char *ptr)
+{
+	return toupper(*(unsigned char *)ptr);
+}

install-sh

@@ -208,7 +208,7 @@ else
 
 # Make a temp file name in the proper directory.
 
-	dsttmp=$dstdir/#inst.$$#
+	dsttmp=$dstdir/_inst.$$_
 
 # Move or copy the file name to the temp name
 

io.h

@@ -0,0 +1,52 @@
+/*
+ * Copyright (C) 2007-2008 Wayne Davison
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, visit the http://fsf.org website.
+ */
+
+extern int protocol_version;
+
+static inline int32
+read_varint30(int f)
+{
+	if (protocol_version < 30)
+		return read_int(f);
+	return read_varint(f);
+}
+
+static inline int64
+read_varlong30(int f, uchar min_bytes)
+{
+	if (protocol_version < 30)
+		return read_longint(f);
+	return read_varlong(f, min_bytes);
+}
+
+static inline void
+write_varint30(int f, int32 x)
+{
+	if (protocol_version < 30)
+		write_int(f, x);
+	else
+		write_varint(f, x);
+}
+
+static inline void
+write_varlong30(int f, int64 x, uchar min_bytes)
+{
+	if (protocol_version < 30)
+		write_longint(f, x);
+	else
+		write_varlong(f, x, min_bytes);
+}

lib/.cvsignore

@@ -1,49 +0,0 @@
-.cvsignore
-Makefile
-a
-b
-config.cache
-config.h
-config.log
-config.status
-dist.tar.gz
-dummy
-rsync
-rsync-0.1
-rsync-0.1
-rsync-0.1
-rsync-0.1.tar.gz
-rsync-0.2
-rsync-0.2
-rsync-0.2.tar.gz
-rsync-0.3
-rsync-0.3
-rsync-0.3.tar.gz
-rsync-0.4
-rsync-0.4
-rsync-0.4.tar.gz
-rsync-0.5
-rsync-0.5
-rsync-0.5
-rsync-0.5
-rsync-0.5
-rsync-0.5
-rsync-0.5
-rsync-0.5
-rsync-0.5.tar.gz
-rsync-0.6
-rsync-0.7
-rsync-0.7
-rsync-0.8
-rsync-0.8
-rsync-0.8
-rsync-0.8
-rsync-ERSION
-rsync.aux
-rsync.dvi
-rsync.log
-tech_report.aux
-tech_report.dvi
-tech_report.log
-tech_report.ps
-test

lib/addrinfo.h

@@ -0,0 +1,180 @@
+/*
+PostgreSQL Database Management System
+(formerly known as Postgres, then as Postgres95)
+
+Portions Copyright (c) 1996-2005, The PostgreSQL Global Development Group
+
+Portions Copyright (c) 1994, The Regents of the University of California
+
+Permission to use, copy, modify, and distribute this software and its
+documentation for any purpose, without fee, and without a written agreement
+is hereby granted, provided that the above copyright notice and this paragraph
+and the following two paragraphs appear in all copies.
+
+IN NO EVENT SHALL THE UNIVERSITY OF CALIFORNIA BE LIABLE TO ANY PARTY FOR
+DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING
+LOST PROFITS, ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION,
+EVEN IF THE UNIVERSITY OF CALIFORNIA HAS BEEN ADVISED OF THE POSSIBILITY OF
+SUCH DAMAGE.
+
+THE UNIVERSITY OF CALIFORNIA SPECIFICALLY DISCLAIMS ANY WARRANTIES,
+INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
+AND FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS
+ON AN "AS IS" BASIS, AND THE UNIVERSITY OF CALIFORNIA HAS NO OBLIGATIONS
+TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS.
+
+*/
+
+/*-------------------------------------------------------------------------
+ *
+ * getaddrinfo.h
+ *	  Support getaddrinfo() on platforms that don't have it.
+ *
+ * Note: we use our own routines on platforms that don't HAVE_STRUCT_ADDRINFO,
+ * whether or not the library routine getaddrinfo() can be found.  This
+ * policy is needed because on some platforms a manually installed libbind.a
+ * may provide getaddrinfo(), yet the system headers may not provide the
+ * struct definitions needed to call it.  To avoid conflict with the libbind
+ * definition in such cases, we rename our routines to pg_xxx() via macros.
+ *
+ * This code will also work on platforms where struct addrinfo is defined
+ * in the system headers but no getaddrinfo() can be located.
+ *
+ * Copyright (c) 2003-2007, PostgreSQL Global Development Group
+ *
+ *-------------------------------------------------------------------------
+ */
+#ifndef ADDRINFO_H
+#define ADDRINFO_H
+
+
+/* Various macros that ought to be in <netdb.h>, but might not be */
+
+#ifndef EAI_FAIL
+#define EAI_BADFLAGS	(-1)
+#define EAI_NONAME		(-2)
+#define EAI_AGAIN		(-3)
+#define EAI_FAIL		(-4)
+#define EAI_FAMILY		(-6)
+#define EAI_SOCKTYPE	(-7)
+#define EAI_SERVICE		(-8)
+#define EAI_MEMORY		(-10)
+#define EAI_SYSTEM		(-11)
+#endif   /* !EAI_FAIL */
+
+#ifndef AI_PASSIVE
+#define AI_PASSIVE		0x0001
+#endif
+
+#ifndef AI_NUMERICHOST
+/*
+ * some platforms don't support AI_NUMERICHOST; define as zero if using
+ * the system version of getaddrinfo...
+ */
+#if defined(HAVE_STRUCT_ADDRINFO) && defined(HAVE_GETADDRINFO)
+#define AI_NUMERICHOST	0
+#else
+#define AI_NUMERICHOST	0x0004
+#endif
+#endif
+
+#ifndef AI_CANONNAME
+#if defined(HAVE_STRUCT_ADDRINFO) && defined(HAVE_GETADDRINFO)
+#define AI_CANONNAME 0
+#else
+#define AI_CANONNAME 0x0008
+#endif
+#endif
+
+#ifndef AI_NUMERICSERV
+#if defined(HAVE_STRUCT_ADDRINFO) && defined(HAVE_GETADDRINFO)
+#define AI_NUMERICSERV 0
+#else
+#define AI_NUMERICSERV 0x0010
+#endif
+#endif
+
+#ifndef NI_NUMERICHOST
+#define NI_NUMERICHOST	1
+#endif
+
+#ifndef NI_NUMERICSERV
+#define NI_NUMERICSERV	2
+#endif
+
+#ifndef NI_NOFQDN
+#define NI_NOFQDN	4
+#endif
+
+#ifndef NI_NAMEREQD
+#define NI_NAMEREQD 	8
+#endif
+
+#ifndef NI_DGRAM
+#define NI_DGRAM	16
+#endif
+
+
+#ifndef NI_MAXHOST
+#define NI_MAXHOST	1025
+#endif
+
+#ifndef NI_MAXSERV
+#define NI_MAXSERV	32
+#endif
+
+#ifndef HAVE_STRUCT_ADDRINFO
+struct addrinfo
+{
+	int			ai_flags;
+	int			ai_family;
+	int			ai_socktype;
+	int			ai_protocol;
+	size_t		ai_addrlen;
+	struct sockaddr *ai_addr;
+	char	   *ai_canonname;
+	struct addrinfo *ai_next;
+};
+#endif   /* !HAVE_STRUCT_ADDRINFO */
+
+#ifndef HAVE_STRUCT_SOCKADDR_STORAGE
+struct sockaddr_storage {
+	unsigned short ss_family;
+	unsigned long ss_align;
+	char ss_padding[128 - sizeof (unsigned long)];
+};
+#endif	/* !HAVE_STRUCT_SOCKADDR_STORAGE */
+
+#ifndef HAVE_GETADDRINFO
+
+/* Rename private copies per comments above */
+#ifdef getaddrinfo
+#undef getaddrinfo
+#endif
+#define getaddrinfo pg_getaddrinfo
+
+#ifdef freeaddrinfo
+#undef freeaddrinfo
+#endif
+#define freeaddrinfo pg_freeaddrinfo
+
+#ifdef gai_strerror
+#undef gai_strerror
+#endif
+#define gai_strerror pg_gai_strerror
+
+#ifdef getnameinfo
+#undef getnameinfo
+#endif
+#define getnameinfo pg_getnameinfo
+
+extern int getaddrinfo(const char *node, const char *service,
+			const struct addrinfo * hints, struct addrinfo ** res);
+extern void freeaddrinfo(struct addrinfo * res);
+extern const char *gai_strerror(int errcode);
+extern int getnameinfo(const struct sockaddr * sa, socklen_t salen,
+			char *node, size_t nodelen,
+			char *service, size_t servicelen, int flags);
+#endif   /* !HAVE_GETADDRINFO */
+
+#endif   /* ADDRINFO_H */

lib/compat.c

@@ -1,37 +1,34 @@
-/* 
-   Copyright (C) Andrew Tridgell 1998
-   
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2 of the License, or
-   (at your option) any later version.
-   
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-   
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
 /*
-  compatibility functions - replacing functions for platforms that don't
-  have them.
+ * Reimplementations of standard functions for platforms that don't have them.
+ *
+ * Copyright (C) 1998 Andrew Tridgell
+ * Copyright (C) 2002 Martin Pool
+ * Copyright (C) 2004, 2005, 2006 Wayne Davison
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, visit the http://fsf.org website.
+ */
 
-  */
 #include "rsync.h"
 
-
 #ifndef HAVE_STRDUP
  char *strdup(char *s)
 {
-  int l = strlen(s) + 1;
-  char *ret = (char *)malloc(l);
-  if (ret)
-    strcpy(ret,s);
-  return ret;
+	int len = strlen(s) + 1;
+	char *ret = (char *)malloc(len);
+	if (ret)
+		memcpy(ret, s, len);
+	return ret;
 }
 #endif
 
@@ -78,9 +75,11 @@
 #endif
 
 #ifndef HAVE_STRPBRK
-/* Find the first ocurrence in S of any character in ACCEPT.  
-   derived from glibc 
-*/
+/**
+ * Find the first ocurrence in @p s of any character in @p accept.
+ *
+ * Derived from glibc
+ **/
  char *strpbrk(const char *s, const char *accept)
 {
 	while (*s != '\0')  {
@@ -95,53 +94,60 @@
 }
 #endif
 
-#ifdef REPLACE_INET_NTOA
- char *rep_inet_ntoa(struct in_addr ip)
-{
-	unsigned char *p = (unsigned char *)&ip.s_addr;
-	static char buf[18];
-#if WORDS_BIGENDIAN
-	slprintf(buf, 18, "%d.%d.%d.%d", 
-		 (int)p[0], (int)p[1], (int)p[2], (int)p[3]);
-#else
-	slprintf(buf, 18, "%d.%d.%d.%d", 
-		 (int)p[3], (int)p[2], (int)p[1], (int)p[0]);
-#endif
-	return buf;
-}
-#endif
 
 #ifndef HAVE_STRLCPY
-/* like strncpy but does not 0 fill the buffer and always null 
-   terminates. bufsize is the size of the destination buffer */
+/**
+ * Like strncpy but does not 0 fill the buffer and always null
+ * terminates.
+ *
+ * @param bufsize is the size of the destination buffer.
+ *
+ * @return index of the terminating byte.
+ **/
  size_t strlcpy(char *d, const char *s, size_t bufsize)
 {
 	size_t len = strlen(s);
 	size_t ret = len;
-	if (len >= bufsize) len = bufsize-1;
-	memcpy(d, s, len);
-	d[len] = 0;
+	if (bufsize > 0) {
+		if (len >= bufsize)
+			len = bufsize-1;
+		memcpy(d, s, len);
+		d[len] = 0;
+	}
 	return ret;
 }
 #endif
 
 #ifndef HAVE_STRLCAT
-/* like strncat but does not 0 fill the buffer and always null 
-   terminates. bufsize is the length of the buffer, which should
-   be one more than the maximum resulting string length */
+/**
+ * Like strncat() but does not 0 fill the buffer and always null
+ * terminates.
+ *
+ * @param bufsize length of the buffer, which should be one more than
+ * the maximum resulting string length.
+ **/
  size_t strlcat(char *d, const char *s, size_t bufsize)
 {
 	size_t len1 = strlen(d);
 	size_t len2 = strlen(s);
 	size_t ret = len1 + len2;
 
-	if (len1+len2 >= bufsize) {
-		len2 = bufsize - (len1+1);
-	}
-	if (len2 > 0) {
+	if (len1 < bufsize - 1) {
+		if (len2 >= bufsize - len1)
+			len2 = bufsize - len1 - 1;
 		memcpy(d+len1, s, len2);
 		d[len1+len2] = 0;
 	}
 	return ret;
 }
 #endif
+
+/* some systems don't take the 2nd argument */
+int sys_gettimeofday(struct timeval *tv)
+{
+#ifdef HAVE_GETTIMEOFDAY_TZ
+	return gettimeofday(tv, NULL);
+#else
+	return gettimeofday(tv);
+#endif
+}

lib/fnmatch.c

@@ -1,204 +0,0 @@
-#include "../rsync.h"
-#ifndef HAVE_FNMATCH
-
-/* Copyright (C) 1991, 1992, 1993 Free Software Foundation, Inc.
-
-NOTE: The canonical source of this file is maintained with the GNU C Library.
-Bugs can be reported to bug-glibc@prep.ai.mit.edu.
-
-This program is free software; you can redistribute it and/or modify it
-under the terms of the GNU General Public License as published by the
-Free Software Foundation; either version 2, or (at your option) any
-later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-#if defined (STDC_HEADERS) || !defined (isascii)
-#define ISASCII(c) 1
-#else
-#define ISASCII(c) isascii(c)
-#endif
-
-#define ISUPPER(c) (ISASCII (c) && isupper (c))
-
-
-/* Comment out all this code if we are using the GNU C Library, and are not
-   actually compiling the library itself.  This code is part of the GNU C
-   Library, but also included in many other GNU distributions.  Compiling
-   and linking in this code is a waste when using the GNU C library
-   (especially if it is a shared library).  Rather than having every GNU
-   program understand `configure --with-gnu-libc' and omit the object files,
-   it is simpler to just do this in the source for each such file.  */
-
-#if !defined(__GNU_LIBRARY__) && !defined(STDC_HEADERS)
-extern int errno;
-#endif
-
-/* Match STRING against the filename pattern PATTERN, returning zero if
-   it matches, nonzero if not.  */
-int
-fnmatch (pattern, string, flags)
-     const char *pattern;
-     const char *string;
-     int flags;
-{
-  register const char *p = pattern, *n = string;
-  register char c;
-
-/* Note that this evalutes C many times.  */
-#define FOLD(c)	((flags & FNM_CASEFOLD) && ISUPPER (c) ? tolower (c) : (c))
-
-  while ((c = *p++) != '\0')
-    {
-      c = FOLD (c);
-
-      switch (c)
-	{
-	case '?':
-	  if (*n == '\0')
-	    return FNM_NOMATCH;
-	  else if ((flags & FNM_FILE_NAME) && *n == '/')
-	    return FNM_NOMATCH;
-	  else if ((flags & FNM_PERIOD) && *n == '.' &&
-		   (n == string || ((flags & FNM_FILE_NAME) && n[-1] == '/')))
-	    return FNM_NOMATCH;
-	  break;
-
-	case '\\':
-	  if (!(flags & FNM_NOESCAPE))
-	    {
-	      c = *p++;
-	      c = FOLD (c);
-	    }
-	  if (FOLD (*n) != c)
-	    return FNM_NOMATCH;
-	  break;
-
-	case '*':
-	  if ((flags & FNM_PERIOD) && *n == '.' &&
-	      (n == string || ((flags & FNM_FILE_NAME) && n[-1] == '/')))
-	    return FNM_NOMATCH;
-
-	  for (c = *p++; c == '?' || c == '*'; c = *p++, ++n)
-	    if (((flags & FNM_FILE_NAME) && *n == '/') ||
-		(c == '?' && *n == '\0'))
-	      return FNM_NOMATCH;
-
-	  if (c == '\0')
-	    return 0;
-
-	  {
-	    char c1 = (!(flags & FNM_NOESCAPE) && c == '\\') ? *p : c;
-	    c1 = FOLD (c1);
-	    for (--p; *n != '\0'; ++n)
-	      if ((c == '[' || FOLD (*n) == c1) &&
-		  fnmatch (p, n, flags & ~FNM_PERIOD) == 0)
-		return 0;
-	    return FNM_NOMATCH;
-	  }
-
-	case '[':
-	  {
-	    /* Nonzero if the sense of the character class is inverted.  */
-	    register int not;
-
-	    if (*n == '\0')
-	      return FNM_NOMATCH;
-
-	    if ((flags & FNM_PERIOD) && *n == '.' &&
-		(n == string || ((flags & FNM_FILE_NAME) && n[-1] == '/')))
-	      return FNM_NOMATCH;
-
-	    not = (*p == '!' || *p == '^');
-	    if (not)
-	      ++p;
-
-	    c = *p++;
-	    for (;;)
-	      {
-		register char cstart = c, cend = c;
-
-		if (!(flags & FNM_NOESCAPE) && c == '\\')
-		  cstart = cend = *p++;
-
-		cstart = cend = FOLD (cstart);
-
-		if (c == '\0')
-		  /* [ (unterminated) loses.  */
-		  return FNM_NOMATCH;
-
-		c = *p++;
-		c = FOLD (c);
-
-		if ((flags & FNM_FILE_NAME) && c == '/')
-		  /* [/] can never match.  */
-		  return FNM_NOMATCH;
-
-		if (c == '-' && *p != ']')
-		  {
-		    cend = *p++;
-		    if (!(flags & FNM_NOESCAPE) && cend == '\\')
-		      cend = *p++;
-		    if (cend == '\0')
-		      return FNM_NOMATCH;
-		    cend = FOLD (cend);
-
-		    c = *p++;
-		  }
-
-		if (FOLD (*n) >= cstart && FOLD (*n) <= cend)
-		  goto matched;
-
-		if (c == ']')
-		  break;
-	      }
-	    if (!not)
-	      return FNM_NOMATCH;
-	    break;
-
-	  matched:;
-	    /* Skip the rest of the [...] that already matched.  */
-	    while (c != ']')
-	      {
-		if (c == '\0')
-		  /* [... (unterminated) loses.  */
-		  return FNM_NOMATCH;
-
-		c = *p++;
-		if (!(flags & FNM_NOESCAPE) && c == '\\')
-		  /* XXX 1003.2d11 is unclear if this is right.  */
-		  ++p;
-	      }
-	    if (not)
-	      return FNM_NOMATCH;
-	  }
-	  break;
-
-	default:
-	  if (c != FOLD (*n))
-	    return FNM_NOMATCH;
-	}
-
-      ++n;
-    }
-
-  if (*n == '\0')
-    return 0;
-
-  if ((flags & FNM_LEADING_DIR) && *n == '/')
-    /* The FNM_LEADING_DIR flag says that "foo*" matches "foobar/frobozz".  */
-    return 0;
-
-  return FNM_NOMATCH;
-}
-
-#else	/* HAVE_FNMATCH */
-void fnmatch_dummy(void) {}
-#endif

lib/fnmatch.h

@@ -1,69 +0,0 @@
-/* Copyright (C) 1991, 1992, 1993 Free Software Foundation, Inc.
-
-NOTE: The canonical source of this file is maintained with the GNU C Library.
-Bugs can be reported to bug-glibc@prep.ai.mit.edu.
-
-This program is free software; you can redistribute it and/or modify it
-under the terms of the GNU General Public License as published by the
-Free Software Foundation; either version 2, or (at your option) any
-later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-#ifndef	_FNMATCH_H
-
-#define	_FNMATCH_H	1
-
-#ifdef	__cplusplus
-extern "C" {
-#endif
-
-#if defined (__cplusplus) || (defined (__STDC__) && __STDC__)
-#undef	__P
-#define	__P(protos)	protos
-#else /* Not C++ or ANSI C.  */
-#undef	__P
-#define	__P(protos)	()
-/* We can get away without defining `const' here only because in this file
-   it is used only inside the prototype for `fnmatch', which is elided in
-   non-ANSI C where `const' is problematical.  */
-#endif /* C++ or ANSI C.  */
-
-
-/* We #undef these before defining them because some losing systems
-   (HP-UX A.08.07 for example) define these in <unistd.h>.  */
-#undef	FNM_PATHNAME
-#undef	FNM_NOESCAPE
-#undef	FNM_PERIOD
-
-/* Bits set in the FLAGS argument to `fnmatch'.  */
-#define	FNM_PATHNAME	(1 << 0) /* No wildcard can ever match `/'.  */
-#define	FNM_NOESCAPE	(1 << 1) /* Backslashes don't quote special chars.  */
-#define	FNM_PERIOD	(1 << 2) /* Leading `.' is matched only explicitly.  */
-
-#if !defined (_POSIX_C_SOURCE) || _POSIX_C_SOURCE < 2 || defined (_GNU_SOURCE)
-#define	FNM_FILE_NAME	FNM_PATHNAME /* Preferred GNU name.  */
-#define	FNM_LEADING_DIR	(1 << 3) /* Ignore `/...' after a match.  */
-#define	FNM_CASEFOLD	(1 << 4) /* Compare without regard to case.  */
-#endif
-
-/* Value returned by `fnmatch' if STRING does not match PATTERN.  */
-#define	FNM_NOMATCH	1
-
-/* Match STRING against the filename pattern PATTERN,
-   returning zero if it matches, FNM_NOMATCH if not.  */
-extern int fnmatch __P ((const char *__pattern, const char *__string,
-			 int __flags));
-
-#ifdef	__cplusplus
-}
-#endif
-
-#endif /* fnmatch.h */

lib/getaddrinfo.c

@@ -0,0 +1,508 @@
+/*
+PostgreSQL Database Management System
+(formerly known as Postgres, then as Postgres95)
+
+Portions Copyright (c) 1996-2005, The PostgreSQL Global Development Group
+
+Portions Copyright (c) 1994, The Regents of the University of California
+
+Permission to use, copy, modify, and distribute this software and its
+documentation for any purpose, without fee, and without a written agreement
+is hereby granted, provided that the above copyright notice and this paragraph
+and the following two paragraphs appear in all copies.
+
+IN NO EVENT SHALL THE UNIVERSITY OF CALIFORNIA BE LIABLE TO ANY PARTY FOR
+DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING
+LOST PROFITS, ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION,
+EVEN IF THE UNIVERSITY OF CALIFORNIA HAS BEEN ADVISED OF THE POSSIBILITY OF
+SUCH DAMAGE.
+
+THE UNIVERSITY OF CALIFORNIA SPECIFICALLY DISCLAIMS ANY WARRANTIES,
+INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
+AND FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS
+ON AN "AS IS" BASIS, AND THE UNIVERSITY OF CALIFORNIA HAS NO OBLIGATIONS
+TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS.
+
+*/
+
+/*-------------------------------------------------------------------------
+ *
+ * getaddrinfo.c
+ *	  Support getaddrinfo() on platforms that don't have it.
+ *
+ * We also supply getnameinfo() here, assuming that the platform will have
+ * it if and only if it has getaddrinfo().	If this proves false on some
+ * platform, we'll need to split this file and provide a separate configure
+ * test for getnameinfo().
+ *
+ * Copyright (c) 2003-2007, PostgreSQL Global Development Group
+ *
+ * Copyright (C) 2007 Jeremy Allison.
+ * Modified to return multiple IPv4 addresses for Samba.
+ *
+ *-------------------------------------------------------------------------
+ */
+
+#include "rsync.h"
+
+#ifndef SMB_MALLOC
+#define SMB_MALLOC(s) malloc(s)
+#endif
+
+#ifndef SMB_STRDUP
+#define SMB_STRDUP(s) strdup(s)
+#endif
+
+#ifndef HOST_NAME_MAX
+#define HOST_NAME_MAX 255
+#endif
+
+static int check_hostent_err(struct hostent *hp)
+{
+#ifndef INET6
+	extern int h_errno;
+#endif
+	if (!hp) {
+		switch (h_errno) {
+			case HOST_NOT_FOUND:
+			case NO_DATA:
+				return EAI_NONAME;
+			case TRY_AGAIN:
+				return EAI_AGAIN;
+			case NO_RECOVERY:
+			default:
+				return EAI_FAIL;
+		}
+	}
+	if (!hp->h_name || hp->h_addrtype != AF_INET) {
+		return EAI_FAIL;
+	}
+	return 0;
+}
+
+static char *canon_name_from_hostent(struct hostent *hp,
+				int *perr)
+{
+	char *ret = NULL;
+
+	*perr = check_hostent_err(hp);
+	if (*perr) {
+		return NULL;
+	}
+	ret = SMB_STRDUP(hp->h_name);
+	if (!ret) {
+		*perr = EAI_MEMORY;
+	}
+	return ret;
+}
+
+static char *get_my_canon_name(int *perr)
+{
+	char name[HOST_NAME_MAX+1];
+
+	if (gethostname(name, HOST_NAME_MAX) == -1) {
+		*perr = EAI_FAIL;
+		return NULL;
+	}
+	/* Ensure null termination. */
+	name[HOST_NAME_MAX] = '\0';
+	return canon_name_from_hostent(gethostbyname(name), perr);
+}
+
+static char *get_canon_name_from_addr(struct in_addr ip,
+				int *perr)
+{
+	return canon_name_from_hostent(
+			gethostbyaddr((void *)&ip, sizeof ip, AF_INET),
+			perr);
+}
+
+static struct addrinfo *alloc_entry(const struct addrinfo *hints,
+				struct in_addr ip,
+				unsigned short port)
+{
+	struct sockaddr_in *psin = NULL;
+	struct addrinfo *ai = SMB_MALLOC(sizeof(*ai));
+
+	if (!ai) {
+		return NULL;
+	}
+	memset(ai, '\0', sizeof(*ai));
+
+	psin = SMB_MALLOC(sizeof(*psin));
+	if (!psin) {
+		free(ai);
+		return NULL;
+	}
+
+	memset(psin, '\0', sizeof(*psin));
+
+	psin->sin_family = AF_INET;
+	psin->sin_port = htons(port);
+	psin->sin_addr = ip;
+
+	ai->ai_flags = 0;
+	ai->ai_family = AF_INET;
+	ai->ai_socktype = hints->ai_socktype;
+	ai->ai_protocol = hints->ai_protocol;
+	ai->ai_addrlen = sizeof(*psin);
+	ai->ai_addr = (struct sockaddr *) psin;
+	ai->ai_canonname = NULL;
+	ai->ai_next = NULL;
+
+	return ai;
+}
+
+/*
+ * get address info for a single ipv4 address.
+ *
+ *	Bugs:	- servname can only be a number, not text.
+ */
+
+static int getaddr_info_single_addr(const char *service,
+				uint32 addr,
+				const struct addrinfo *hints,
+				struct addrinfo **res)
+{
+
+	struct addrinfo *ai = NULL;
+	struct in_addr ip;
+	unsigned short port = 0;
+
+	if (service) {
+		port = (unsigned short)atoi(service);
+	}
+	ip.s_addr = htonl(addr);
+
+	ai = alloc_entry(hints, ip, port);
+	if (!ai) {
+		return EAI_MEMORY;
+	}
+
+	/* If we're asked for the canonical name,
+	 * make sure it returns correctly. */
+	if (!(hints->ai_flags & AI_NUMERICSERV) &&
+			hints->ai_flags & AI_CANONNAME) {
+		int err;
+		if (addr == INADDR_LOOPBACK || addr == INADDR_ANY) {
+			ai->ai_canonname = get_my_canon_name(&err);
+		} else {
+			ai->ai_canonname =
+			get_canon_name_from_addr(ip,&err);
+		}
+		if (ai->ai_canonname == NULL) {
+			freeaddrinfo(ai);
+			return err;
+		}
+	}
+
+	*res = ai;
+	return 0;
+}
+
+/*
+ * get address info for multiple ipv4 addresses.
+ *
+ *	Bugs:	- servname can only be a number, not text.
+ */
+
+static int getaddr_info_name(const char *node,
+				const char *service,
+				const struct addrinfo *hints,
+				struct addrinfo **res)
+{
+	struct addrinfo *listp = NULL, *prevp = NULL;
+	char **pptr = NULL;
+	int err;
+	struct hostent *hp = NULL;
+	unsigned short port = 0;
+
+	if (service) {
+		port = (unsigned short)atoi(service);
+	}
+
+	hp = gethostbyname(node);
+	err = check_hostent_err(hp);
+	if (err) {
+		return err;
+	}
+
+	for(pptr = hp->h_addr_list; *pptr; pptr++) {
+		struct in_addr ip = *(struct in_addr *)*pptr;
+		struct addrinfo *ai = alloc_entry(hints, ip, port);
+
+		if (!ai) {
+			freeaddrinfo(listp);
+			return EAI_MEMORY;
+		}
+
+		if (!listp) {
+			listp = ai;
+			prevp = ai;
+			ai->ai_canonname = SMB_STRDUP(hp->h_name);
+			if (!ai->ai_canonname) {
+				freeaddrinfo(listp);
+				return EAI_MEMORY;
+			}
+		} else {
+			prevp->ai_next = ai;
+			prevp = ai;
+		}
+	}
+	*res = listp;
+	return 0;
+}
+
+/*
+ * get address info for ipv4 sockets.
+ *
+ *	Bugs:	- servname can only be a number, not text.
+ */
+
+int getaddrinfo(const char *node,
+		const char *service,
+		const struct addrinfo * hintp,
+		struct addrinfo ** res)
+{
+	struct addrinfo hints;
+
+	/* Setup the hints struct. */
+	if (hintp == NULL) {
+		memset(&hints, 0, sizeof(hints));
+		hints.ai_family = AF_INET;
+		hints.ai_socktype = SOCK_STREAM;
+	} else {
+		memcpy(&hints, hintp, sizeof(hints));
+	}
+
+	if (hints.ai_family != AF_INET && hints.ai_family != AF_UNSPEC) {
+		return EAI_FAMILY;
+	}
+
+	if (hints.ai_socktype == 0) {
+		hints.ai_socktype = SOCK_STREAM;
+	}
+
+	if (!node && !service) {
+		return EAI_NONAME;
+	}
+
+	if (node) {
+		if (node[0] == '\0') {
+			return getaddr_info_single_addr(service,
+					INADDR_ANY,
+					&hints,
+					res);
+		} else if (hints.ai_flags & AI_NUMERICHOST) {
+			struct in_addr ip;
+			if (!inet_aton(node, &ip)) {
+				return EAI_FAIL;
+			}
+			return getaddr_info_single_addr(service,
+					ntohl(ip.s_addr),
+					&hints,
+					res);
+		} else {
+			return getaddr_info_name(node,
+						service,
+						&hints,
+						res);
+		}
+	} else if (hints.ai_flags & AI_PASSIVE) {
+		return getaddr_info_single_addr(service,
+					INADDR_ANY,
+					&hints,
+					res);
+	}
+	return getaddr_info_single_addr(service,
+					INADDR_LOOPBACK,
+					&hints,
+					res);
+}
+
+
+void freeaddrinfo(struct addrinfo *res)
+{
+	struct addrinfo *next = NULL;
+
+	for (;res; res = next) {
+		next = res->ai_next;
+		if (res->ai_canonname) {
+			free(res->ai_canonname);
+		}
+		if (res->ai_addr) {
+			free(res->ai_addr);
+		}
+		free(res);
+	}
+}
+
+
+const char *gai_strerror(int errcode)
+{
+#ifdef HAVE_HSTRERROR
+	int			hcode;
+
+	switch (errcode)
+	{
+		case EAI_NONAME:
+			hcode = HOST_NOT_FOUND;
+			break;
+		case EAI_AGAIN:
+			hcode = TRY_AGAIN;
+			break;
+		case EAI_FAIL:
+		default:
+			hcode = NO_RECOVERY;
+			break;
+	}
+
+	return hstrerror(hcode);
+#else							/* !HAVE_HSTRERROR */
+
+	switch (errcode)
+	{
+		case EAI_NONAME:
+			return "Unknown host";
+		case EAI_AGAIN:
+			return "Host name lookup failure";
+#ifdef EAI_BADFLAGS
+		case EAI_BADFLAGS:
+			return "Invalid argument";
+#endif
+#ifdef EAI_FAMILY
+		case EAI_FAMILY:
+			return "Address family not supported";
+#endif
+#ifdef EAI_MEMORY
+		case EAI_MEMORY:
+			return "Not enough memory";
+#endif
+#ifdef EAI_NODATA
+		case EAI_NODATA:
+			return "No host data of that type was found";
+#endif
+#ifdef EAI_SERVICE
+		case EAI_SERVICE:
+			return "Class type not found";
+#endif
+#ifdef EAI_SOCKTYPE
+		case EAI_SOCKTYPE:
+			return "Socket type not supported";
+#endif
+		default:
+			return "Unknown server error";
+	}
+#endif   /* HAVE_HSTRERROR */
+}
+
+static int gethostnameinfo(const struct sockaddr *sa,
+			char *node,
+			size_t nodelen,
+			int flags)
+{
+	int ret = -1;
+	char *p = NULL;
+
+	if (!(flags & NI_NUMERICHOST)) {
+		struct hostent *hp = gethostbyaddr(
+				(void *)&((struct sockaddr_in *)sa)->sin_addr,
+				sizeof (struct in_addr),
+				sa->sa_family);
+		ret = check_hostent_err(hp);
+		if (ret == 0) {
+			/* Name looked up successfully. */
+			ret = snprintf(node, nodelen, "%s", hp->h_name);
+			if (ret < 0 || (size_t)ret >= nodelen) {
+				return EAI_MEMORY;
+			}
+			if (flags & NI_NOFQDN) {
+				p = strchr(node,'.');
+				if (p) {
+					*p = '\0';
+				}
+			}
+			return 0;
+		}
+
+		if (flags & NI_NAMEREQD) {
+			/* If we require a name and didn't get one,
+			 * automatically fail. */
+			return ret;
+		}
+		/* Otherwise just fall into the numeric host code... */
+	}
+	p = inet_ntoa(((struct sockaddr_in *)sa)->sin_addr);
+	ret = snprintf(node, nodelen, "%s", p);
+	if (ret < 0 || (size_t)ret >= nodelen) {
+		return EAI_MEMORY;
+	}
+	return 0;
+}
+
+static int getservicenameinfo(const struct sockaddr *sa,
+			char *service,
+			size_t servicelen,
+			int flags)
+{
+	int ret = -1;
+	int port = ntohs(((struct sockaddr_in *)sa)->sin_port);
+
+	if (!(flags & NI_NUMERICSERV)) {
+		struct servent *se = getservbyport(
+				port,
+				(flags & NI_DGRAM) ? "udp" : "tcp");
+		if (se && se->s_name) {
+			/* Service name looked up successfully. */
+			ret = snprintf(service, servicelen, "%s", se->s_name);
+			if (ret < 0 || (size_t)ret >= servicelen) {
+				return EAI_MEMORY;
+			}
+			return 0;
+		}
+		/* Otherwise just fall into the numeric service code... */
+	}
+	ret = snprintf(service, servicelen, "%d", port);
+	if (ret < 0 || (size_t)ret >= servicelen) {
+		return EAI_MEMORY;
+	}
+	return 0;
+}
+
+/*
+ * Convert an ipv4 address to a hostname.
+ *
+ * Bugs:	- No IPv6 support.
+ */
+int getnameinfo(const struct sockaddr *sa, socklen_t salen,
+			char *node, size_t nodelen,
+			char *service, size_t servicelen, int flags)
+{
+
+	/* Invalid arguments. */
+	if (sa == NULL || (node == NULL && service == NULL)) {
+		return EAI_FAIL;
+	}
+
+	if (sa->sa_family != AF_INET) {
+		return EAI_FAIL;
+	}
+
+	if (salen < (socklen_t)sizeof (struct sockaddr_in)) {
+		return EAI_FAIL;
+	}
+
+	/* We don't support those. */
+	if ((node && !(flags & NI_NUMERICHOST))
+		|| (service && !(flags & NI_NUMERICSERV)))
+		return EAI_FAIL;
+
+	if (node) {
+		return gethostnameinfo(sa, node, nodelen, flags);
+	}
+
+	if (service) {
+		return getservicenameinfo(sa, service, servicelen, flags);
+	}
+	return 0;
+}

lib/getopt.c

@@ -1,751 +0,0 @@
-#include "../rsync.h"
-#ifndef HAVE_GETOPT_LONG
-
-/* Getopt for GNU.
-   NOTE: getopt is now part of the C library, so if you don't know what
-   "Keep this file name-space clean" means, talk to roland@gnu.ai.mit.edu
-   before changing it!
-
-   Copyright (C) 1987, 88, 89, 90, 91, 92, 93, 94
-   	Free Software Foundation, Inc.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2, or (at your option) any
-   later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/* This tells Alpha OSF/1 not to define a getopt prototype in <stdio.h>.
-   Ditto for AIX 3.2 and <stdlib.h>.  */
-#ifndef _NO_PROTO
-#define _NO_PROTO
-#endif
-
-/* Comment out all this code if we are using the GNU C Library, and are not
-   actually compiling the library itself.  This code is part of the GNU C
-   Library, but also included in many other GNU distributions.  Compiling
-   and linking in this code is a waste when using the GNU C library
-   (especially if it is a shared library).  Rather than having every GNU
-   program understand `configure --with-gnu-libc' and omit the object files,
-   it is simpler to just do this in the source for each such file.  */
-
-#if defined (_LIBC) || !defined (__GNU_LIBRARY__)
-
-/* This is for other GNU distributions with internationalized messages.
-   The GNU C Library itself does not yet support such messages.  */
-#if HAVE_LIBINTL_H
-# include <libintl.h>
-#else
-# define gettext(msgid) (msgid)
-#endif
-
-/* This version of `getopt' appears to the caller like standard Unix `getopt'
-   but it behaves differently for the user, since it allows the user
-   to intersperse the options with the other arguments.
-
-   As `getopt' works, it permutes the elements of ARGV so that,
-   when it is done, all the options precede everything else.  Thus
-   all application programs are extended to handle flexible argument order.
-
-   Setting the environment variable POSIXLY_CORRECT disables permutation.
-   Then the behavior is completely standard.
-
-   GNU application programs can use a third alternative mode in which
-   they can distinguish the relative order of options and other arguments.  */
-
-/* For communication from `getopt' to the caller.
-   When `getopt' finds an option that takes an argument,
-   the argument value is returned here.
-   Also, when `ordering' is RETURN_IN_ORDER,
-   each non-option ARGV-element is returned here.  */
-
-char *optarg = NULL;
-
-/* Index in ARGV of the next element to be scanned.
-   This is used for communication to and from the caller
-   and for communication between successive calls to `getopt'.
-
-   On entry to `getopt', zero means this is the first call; initialize.
-
-   When `getopt' returns EOF, this is the index of the first of the
-   non-option elements that the caller should itself scan.
-
-   Otherwise, `optind' communicates from one call to the next
-   how much of ARGV has been scanned so far.  */
-
-/* XXX 1003.2 says this must be 1 before any call.  */
-int optind = 0;
-
-/* The next char to be scanned in the option-element
-   in which the last option character we returned was found.
-   This allows us to pick up the scan where we left off.
-
-   If this is zero, or a null string, it means resume the scan
-   by advancing to the next ARGV-element.  */
-
-static char *nextchar;
-
-/* Callers store zero here to inhibit the error message
-   for unrecognized options.  */
-
-int opterr = 1;
-
-/* Set to an option character which was unrecognized.
-   This must be initialized on some systems to avoid linking in the
-   system's own getopt implementation.  */
-
-int optopt = '?';
-
-/* Describe how to deal with options that follow non-option ARGV-elements.
-
-   If the caller did not specify anything,
-   the default is REQUIRE_ORDER if the environment variable
-   POSIXLY_CORRECT is defined, PERMUTE otherwise.
-
-   REQUIRE_ORDER means don't recognize them as options;
-   stop option processing when the first non-option is seen.
-   This is what Unix does.
-   This mode of operation is selected by either setting the environment
-   variable POSIXLY_CORRECT, or using `+' as the first character
-   of the list of option characters.
-
-   PERMUTE is the default.  We permute the contents of ARGV as we scan,
-   so that eventually all the non-options are at the end.  This allows options
-   to be given in any order, even with programs that were not written to
-   expect this.
-
-   RETURN_IN_ORDER is an option available to programs that were written
-   to expect options and other ARGV-elements in any order and that care about
-   the ordering of the two.  We describe each non-option ARGV-element
-   as if it were the argument of an option with character code 1.
-   Using `-' as the first character of the list of option characters
-   selects this mode of operation.
-
-   The special argument `--' forces an end of option-scanning regardless
-   of the value of `ordering'.  In the case of RETURN_IN_ORDER, only
-   `--' can cause `getopt' to return EOF with `optind' != ARGC.  */
-
-static enum
-{
-  REQUIRE_ORDER, PERMUTE, RETURN_IN_ORDER
-} ordering;
-
-/* Value of POSIXLY_CORRECT environment variable.  */
-static char *posixly_correct;
-
-#ifdef	__GNU_LIBRARY__
-/* We want to avoid inclusion of string.h with non-GNU libraries
-   because there are many ways it can cause trouble.
-   On some systems, it contains special magic macros that don't work
-   in GCC.  */
-#include <string.h>
-#define	my_index	strchr
-#else
-
-/* Avoid depending on library functions or files
-   whose names are inconsistent.  */
-
-char *getenv ();
-
-static char *
-my_index (str, chr)
-     const char *str;
-     int chr;
-{
-  while (*str)
-    {
-      if (*str == chr)
-	return (char *) str;
-      str++;
-    }
-  return 0;
-}
-
-/* If using GCC, we can safely declare strlen this way.
-   If not using GCC, it is ok not to declare it.  */
-#ifdef __GNUC__
-/* Note that Motorola Delta 68k R3V7 comes with GCC but not stddef.h.
-   That was relevant to code that was here before.  */
-#if !defined (__STDC__) || !__STDC__
-/* gcc with -traditional declares the built-in strlen to return int,
-   and has done so at least since version 2.4.5. -- rms.  */
-extern int strlen (const char *);
-#endif /* not __STDC__ */
-#endif /* __GNUC__ */
-
-#endif /* not __GNU_LIBRARY__ */
-
-/* Handle permutation of arguments.  */
-
-/* Describe the part of ARGV that contains non-options that have
-   been skipped.  `first_nonopt' is the index in ARGV of the first of them;
-   `last_nonopt' is the index after the last of them.  */
-
-static int first_nonopt;
-static int last_nonopt;
-
-/* Exchange two adjacent subsequences of ARGV.
-   One subsequence is elements [first_nonopt,last_nonopt)
-   which contains all the non-options that have been skipped so far.
-   The other is elements [last_nonopt,optind), which contains all
-   the options processed since those non-options were skipped.
-
-   `first_nonopt' and `last_nonopt' are relocated so that they describe
-   the new indices of the non-options in ARGV after they are moved.  */
-
-static void
-exchange (argv)
-     char **argv;
-{
-  int bottom = first_nonopt;
-  int middle = last_nonopt;
-  int top = optind;
-  char *tem;
-
-  /* Exchange the shorter segment with the far end of the longer segment.
-     That puts the shorter segment into the right place.
-     It leaves the longer segment in the right place overall,
-     but it consists of two parts that need to be swapped next.  */
-
-  while (top > middle && middle > bottom)
-    {
-      if (top - middle > middle - bottom)
-	{
-	  /* Bottom segment is the short one.  */
-	  int len = middle - bottom;
-	  register int i;
-
-	  /* Swap it with the top part of the top segment.  */
-	  for (i = 0; i < len; i++)
-	    {
-	      tem = argv[bottom + i];
-	      argv[bottom + i] = argv[top - (middle - bottom) + i];
-	      argv[top - (middle - bottom) + i] = tem;
-	    }
-	  /* Exclude the moved bottom segment from further swapping.  */
-	  top -= len;
-	}
-      else
-	{
-	  /* Top segment is the short one.  */
-	  int len = top - middle;
-	  register int i;
-
-	  /* Swap it with the bottom part of the bottom segment.  */
-	  for (i = 0; i < len; i++)
-	    {
-	      tem = argv[bottom + i];
-	      argv[bottom + i] = argv[middle + i];
-	      argv[middle + i] = tem;
-	    }
-	  /* Exclude the moved top segment from further swapping.  */
-	  bottom += len;
-	}
-    }
-
-  /* Update records for the slots the non-options now occupy.  */
-
-  first_nonopt += (optind - last_nonopt);
-  last_nonopt = optind;
-}
-
-/* Initialize the internal data when the first call is made.  */
-
-static const char *
-_getopt_initialize (optstring)
-     const char *optstring;
-{
-  /* Start processing options with ARGV-element 1 (since ARGV-element 0
-     is the program name); the sequence of previously skipped
-     non-option ARGV-elements is empty.  */
-
-  first_nonopt = last_nonopt = optind = 1;
-
-  nextchar = NULL;
-
-  posixly_correct = getenv ("POSIXLY_CORRECT");
-
-  /* Determine how to handle the ordering of options and nonoptions.  */
-
-  if (optstring[0] == '-')
-    {
-      ordering = RETURN_IN_ORDER;
-      ++optstring;
-    }
-  else if (optstring[0] == '+')
-    {
-      ordering = REQUIRE_ORDER;
-      ++optstring;
-    }
-  else if (posixly_correct != NULL)
-    ordering = REQUIRE_ORDER;
-  else
-    ordering = PERMUTE;
-
-  return optstring;
-}
-
-/* Scan elements of ARGV (whose length is ARGC) for option characters
-   given in OPTSTRING.
-
-   If an element of ARGV starts with '-', and is not exactly "-" or "--",
-   then it is an option element.  The characters of this element
-   (aside from the initial '-') are option characters.  If `getopt'
-   is called repeatedly, it returns successively each of the option characters
-   from each of the option elements.
-
-   If `getopt' finds another option character, it returns that character,
-   updating `optind' and `nextchar' so that the next call to `getopt' can
-   resume the scan with the following option character or ARGV-element.
-
-   If there are no more option characters, `getopt' returns `EOF'.
-   Then `optind' is the index in ARGV of the first ARGV-element
-   that is not an option.  (The ARGV-elements have been permuted
-   so that those that are not options now come last.)
-
-   OPTSTRING is a string containing the legitimate option characters.
-   If an option character is seen that is not listed in OPTSTRING,
-   return '?' after printing an error message.  If you set `opterr' to
-   zero, the error message is suppressed but we still return '?'.
-
-   If a char in OPTSTRING is followed by a colon, that means it wants an arg,
-   so the following text in the same ARGV-element, or the text of the following
-   ARGV-element, is returned in `optarg'.  Two colons mean an option that
-   wants an optional arg; if there is text in the current ARGV-element,
-   it is returned in `optarg', otherwise `optarg' is set to zero.
-
-   If OPTSTRING starts with `-' or `+', it requests different methods of
-   handling the non-option ARGV-elements.
-   See the comments about RETURN_IN_ORDER and REQUIRE_ORDER, above.
-
-   Long-named options begin with `--' instead of `-'.
-   Their names may be abbreviated as long as the abbreviation is unique
-   or is an exact match for some defined option.  If they have an
-   argument, it follows the option name in the same ARGV-element, separated
-   from the option name by a `=', or else the in next ARGV-element.
-   When `getopt' finds a long-named option, it returns 0 if that option's
-   `flag' field is nonzero, the value of the option's `val' field
-   if the `flag' field is zero.
-
-   The elements of ARGV aren't really const, because we permute them.
-   But we pretend they're const in the prototype to be compatible
-   with other systems.
-
-   LONGOPTS is a vector of `struct option' terminated by an
-   element containing a name which is zero.
-
-   LONGIND returns the index in LONGOPT of the long-named option found.
-   It is only valid when a long-named option has been found by the most
-   recent call.
-
-   If LONG_ONLY is nonzero, '-' as well as '--' can introduce
-   long-named options.  */
-
-int
-_getopt_internal (argc, argv, optstring, longopts, longind, long_only)
-     int argc;
-     char *const *argv;
-     const char *optstring;
-     const struct option *longopts;
-     int *longind;
-     int long_only;
-{
-  optarg = NULL;
-
-  if (optind == 0)
-    optstring = _getopt_initialize (optstring);
-
-  if (nextchar == NULL || *nextchar == '\0')
-    {
-      /* Advance to the next ARGV-element.  */
-
-      if (ordering == PERMUTE)
-	{
-	  /* If we have just processed some options following some non-options,
-	     exchange them so that the options come first.  */
-
-	  if (first_nonopt != last_nonopt && last_nonopt != optind)
-	    exchange ((char **) argv);
-	  else if (last_nonopt != optind)
-	    first_nonopt = optind;
-
-	  /* Skip any additional non-options
-	     and extend the range of non-options previously skipped.  */
-
-	  while (optind < argc
-		 && (argv[optind][0] != '-' || argv[optind][1] == '\0'))
-	    optind++;
-	  last_nonopt = optind;
-	}
-
-      /* The special ARGV-element `--' means premature end of options.
-	 Skip it like a null option,
-	 then exchange with previous non-options as if it were an option,
-	 then skip everything else like a non-option.  */
-
-      if (optind != argc && !strcmp (argv[optind], "--"))
-	{
-	  optind++;
-
-	  if (first_nonopt != last_nonopt && last_nonopt != optind)
-	    exchange ((char **) argv);
-	  else if (first_nonopt == last_nonopt)
-	    first_nonopt = optind;
-	  last_nonopt = argc;
-
-	  optind = argc;
-	}
-
-      /* If we have done all the ARGV-elements, stop the scan
-	 and back over any non-options that we skipped and permuted.  */
-
-      if (optind == argc)
-	{
-	  /* Set the next-arg-index to point at the non-options
-	     that we previously skipped, so the caller will digest them.  */
-	  if (first_nonopt != last_nonopt)
-	    optind = first_nonopt;
-	  return EOF;
-	}
-
-      /* If we have come to a non-option and did not permute it,
-	 either stop the scan or describe it to the caller and pass it by.  */
-
-      if ((argv[optind][0] != '-' || argv[optind][1] == '\0'))
-	{
-	  if (ordering == REQUIRE_ORDER)
-	    return EOF;
-	  optarg = argv[optind++];
-	  return 1;
-	}
-
-      /* We have found another option-ARGV-element.
-	 Skip the initial punctuation.  */
-
-      nextchar = (argv[optind] + 1
-		  + (longopts != NULL && argv[optind][1] == '-'));
-    }
-
-  /* Decode the current option-ARGV-element.  */
-
-  /* Check whether the ARGV-element is a long option.
-
-     If long_only and the ARGV-element has the form "-f", where f is
-     a valid short option, don't consider it an abbreviated form of
-     a long option that starts with f.  Otherwise there would be no
-     way to give the -f short option.
-
-     On the other hand, if there's a long option "fubar" and
-     the ARGV-element is "-fu", do consider that an abbreviation of
-     the long option, just like "--fu", and not "-f" with arg "u".
-
-     This distinction seems to be the most useful approach.  */
-
-  if (longopts != NULL
-      && (argv[optind][1] == '-'
-	  || (long_only && (argv[optind][2] || !my_index (optstring, argv[optind][1])))))
-    {
-      char *nameend;
-      const struct option *p;
-      const struct option *pfound = NULL;
-      int exact = 0;
-      int ambig = 0;
-      int indfound;
-      int option_index;
-
-      for (nameend = nextchar; *nameend && *nameend != '='; nameend++)
-	/* Do nothing.  */ ;
-
-      /* Test all long options for either exact match
-	 or abbreviated matches.  */
-      for (p = longopts, option_index = 0; p->name; p++, option_index++)
-	if (!strncmp (p->name, nextchar, nameend - nextchar))
-	  {
-	    if (nameend - nextchar == strlen (p->name))
-	      {
-		/* Exact match found.  */
-		pfound = p;
-		indfound = option_index;
-		exact = 1;
-		break;
-	      }
-	    else if (pfound == NULL)
-	      {
-		/* First nonexact match found.  */
-		pfound = p;
-		indfound = option_index;
-	      }
-	    else
-	      /* Second or later nonexact match found.  */
-	      ambig = 1;
-	  }
-
-      if (ambig && !exact)
-	{
-	  if (opterr)
-	    fprintf (stderr, gettext ("%s: option `%s' is ambiguous\n"),
-		     argv[0], argv[optind]);
-	  nextchar += strlen (nextchar);
-	  optind++;
-	  return '?';
-	}
-
-      if (pfound != NULL)
-	{
-	  option_index = indfound;
-	  optind++;
-	  if (*nameend)
-	    {
-	      /* Don't test has_arg with >, because some C compilers don't
-		 allow it to be used on enums.  */
-	      if (pfound->has_arg)
-		optarg = nameend + 1;
-	      else
-		{
-		  if (opterr)
-		   if (argv[optind - 1][1] == '-')
-		    /* --option */
-		    fprintf (stderr,
-		     gettext ("%s: option `--%s' doesn't allow an argument\n"),
-		     argv[0], pfound->name);
-		   else
-		    /* +option or -option */
-		    fprintf (stderr,
-		     gettext ("%s: option `%c%s' doesn't allow an argument\n"),
-		     argv[0], argv[optind - 1][0], pfound->name);
-
-		  nextchar += strlen (nextchar);
-		  return '?';
-		}
-	    }
-	  else if (pfound->has_arg == 1)
-	    {
-	      if (optind < argc)
-		optarg = argv[optind++];
-	      else
-		{
-		  if (opterr)
-		    fprintf (stderr,
-			   gettext ("%s: option `%s' requires an argument\n"),
-			   argv[0], argv[optind - 1]);
-		  nextchar += strlen (nextchar);
-		  return optstring[0] == ':' ? ':' : '?';
-		}
-	    }
-	  nextchar += strlen (nextchar);
-	  if (longind != NULL)
-	    *longind = option_index;
-	  if (pfound->flag)
-	    {
-	      *(pfound->flag) = pfound->val;
-	      return 0;
-	    }
-	  return pfound->val;
-	}
-
-      /* Can't find it as a long option.  If this is not getopt_long_only,
-	 or the option starts with '--' or is not a valid short
-	 option, then it's an error.
-	 Otherwise interpret it as a short option.  */
-      if (!long_only || argv[optind][1] == '-'
-	  || my_index (optstring, *nextchar) == NULL)
-	{
-	  if (opterr)
-	    {
-	      if (argv[optind][1] == '-')
-		/* --option */
-		fprintf (stderr, gettext ("%s: unrecognized option `--%s'\n"),
-			 argv[0], nextchar);
-	      else
-		/* +option or -option */
-		fprintf (stderr, gettext ("%s: unrecognized option `%c%s'\n"),
-			 argv[0], argv[optind][0], nextchar);
-	    }
-	  nextchar = (char *) "";
-	  optind++;
-	  return '?';
-	}
-    }
-
-  /* Look at and handle the next short option-character.  */
-
-  {
-    char c = *nextchar++;
-    char *temp = my_index (optstring, c);
-
-    /* Increment `optind' when we start to process its last character.  */
-    if (*nextchar == '\0')
-      ++optind;
-
-    if (temp == NULL || c == ':')
-      {
-	if (opterr)
-	  {
-	    if (posixly_correct)
-	      /* 1003.2 specifies the format of this message.  */
-	      fprintf (stderr, gettext ("%s: illegal option -- %c\n"),
-		       argv[0], c);
-	    else
-	      fprintf (stderr, gettext ("%s: invalid option -- %c\n"),
-		       argv[0], c);
-	  }
-	optopt = c;
-	return '?';
-      }
-    if (temp[1] == ':')
-      {
-	if (temp[2] == ':')
-	  {
-	    /* This is an option that accepts an argument optionally.  */
-	    if (*nextchar != '\0')
-	      {
-		optarg = nextchar;
-		optind++;
-	      }
-	    else
-	      optarg = NULL;
-	    nextchar = NULL;
-	  }
-	else
-	  {
-	    /* This is an option that requires an argument.  */
-	    if (*nextchar != '\0')
-	      {
-		optarg = nextchar;
-		/* If we end this ARGV-element by taking the rest as an arg,
-		   we must advance to the next element now.  */
-		optind++;
-	      }
-	    else if (optind == argc)
-	      {
-		if (opterr)
-		  {
-		    /* 1003.2 specifies the format of this message.  */
-		    fprintf (stderr,
-			   gettext ("%s: option requires an argument -- %c\n"),
-			   argv[0], c);
-		  }
-		optopt = c;
-		if (optstring[0] == ':')
-		  c = ':';
-		else
-		  c = '?';
-	      }
-	    else
-	      /* We already incremented `optind' once;
-		 increment it again when taking next ARGV-elt as argument.  */
-	      optarg = argv[optind++];
-	    nextchar = NULL;
-	  }
-      }
-    return c;
-  }
-}
-
-int
-getopt (argc, argv, optstring)
-     int argc;
-     char *const *argv;
-     const char *optstring;
-{
-  return _getopt_internal (argc, argv, optstring,
-			   (const struct option *) 0,
-			   (int *) 0,
-			   0);
-}
-
-int
-getopt_long (argc, argv, options, long_options, opt_index)
-     int argc;
-     char *const *argv;
-     const char *options;
-     const struct option *long_options;
-     int *opt_index;
-{
-  return _getopt_internal (argc, argv, options, long_options, opt_index, 0);
-}
-
-#endif	/* _LIBC or not __GNU_LIBRARY__.  */
-
-#ifdef TEST
-
-/* Compile with -DTEST to make an executable for use in testing
-   the above definition of `getopt'.  */
-
-int
-main (argc, argv)
-     int argc;
-     char **argv;
-{
-  int c;
-  int digit_optind = 0;
-
-  while (1)
-    {
-      int this_option_optind = optind ? optind : 1;
-
-      c = getopt (argc, argv, "abc:d:0123456789");
-      if (c == EOF)
-	break;
-
-      switch (c)
-	{
-	case '0':
-	case '1':
-	case '2':
-	case '3':
-	case '4':
-	case '5':
-	case '6':
-	case '7':
-	case '8':
-	case '9':
-	  if (digit_optind != 0 && digit_optind != this_option_optind)
-	    printf ("digits occur in two different argv-elements.\n");
-	  digit_optind = this_option_optind;
-	  printf ("option %c\n", c);
-	  break;
-
-	case 'a':
-	  printf ("option a\n");
-	  break;
-
-	case 'b':
-	  printf ("option b\n");
-	  break;
-
-	case 'c':
-	  printf ("option c with value `%s'\n", optarg);
-	  break;
-
-	case '?':
-	  break;
-
-	default:
-	  printf ("?? getopt returned character code 0%o ??\n", c);
-	}
-    }
-
-  if (optind < argc)
-    {
-      printf ("non-option ARGV-elements: ");
-      while (optind < argc)
-	printf ("%s ", argv[optind++]);
-      printf ("\n");
-    }
-
-  exit (0);
-}
-
-#endif /* TEST */
-#else  /* HAVE_GETOPT_LONG */
-void getopt_dummy(void) {}
-#endif

lib/getopt.h

@@ -1,129 +0,0 @@
-/* Declarations for getopt.
-   Copyright (C) 1989, 90, 91, 92, 93, 94 Free Software Foundation, Inc.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2, or (at your option) any
-   later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-#ifndef _GETOPT_H
-#define _GETOPT_H 1
-
-#ifdef	__cplusplus
-extern "C" {
-#endif
-
-/* For communication from `getopt' to the caller.
-   When `getopt' finds an option that takes an argument,
-   the argument value is returned here.
-   Also, when `ordering' is RETURN_IN_ORDER,
-   each non-option ARGV-element is returned here.  */
-
-extern char *optarg;
-
-/* Index in ARGV of the next element to be scanned.
-   This is used for communication to and from the caller
-   and for communication between successive calls to `getopt'.
-
-   On entry to `getopt', zero means this is the first call; initialize.
-
-   When `getopt' returns EOF, this is the index of the first of the
-   non-option elements that the caller should itself scan.
-
-   Otherwise, `optind' communicates from one call to the next
-   how much of ARGV has been scanned so far.  */
-
-extern int optind;
-
-/* Callers store zero here to inhibit the error message `getopt' prints
-   for unrecognized options.  */
-
-extern int opterr;
-
-/* Set to an option character which was unrecognized.  */
-
-extern int optopt;
-
-/* Describe the long-named options requested by the application.
-   The LONG_OPTIONS argument to getopt_long or getopt_long_only is a vector
-   of `struct option' terminated by an element containing a name which is
-   zero.
-
-   The field `has_arg' is:
-   no_argument		(or 0) if the option does not take an argument,
-   required_argument	(or 1) if the option requires an argument,
-   optional_argument 	(or 2) if the option takes an optional argument.
-
-   If the field `flag' is not NULL, it points to a variable that is set
-   to the value given in the field `val' when the option is found, but
-   left unchanged if the option is not found.
-
-   To have a long-named option do something other than set an `int' to
-   a compiled-in constant, such as set a value from `optarg', set the
-   option's `flag' field to zero and its `val' field to a nonzero
-   value (the equivalent single-letter option character, if there is
-   one).  For long options that have a zero `flag' field, `getopt'
-   returns the contents of the `val' field.  */
-
-struct option
-{
-#if defined (__STDC__) && __STDC__
-  const char *name;
-#else
-  char *name;
-#endif
-  /* has_arg can't be an enum because some compilers complain about
-     type mismatches in all the code that assumes it is an int.  */
-  int has_arg;
-  int *flag;
-  int val;
-};
-
-/* Names for the values of the `has_arg' field of `struct option'.  */
-
-#define	no_argument		0
-#define required_argument	1
-#define optional_argument	2
-
-#if defined (__STDC__) && __STDC__
-#ifdef __GNU_LIBRARY__
-/* Many other libraries have conflicting prototypes for getopt, with
-   differences in the consts, in stdlib.h.  To avoid compilation
-   errors, only prototype getopt for the GNU C library.  */
-extern int getopt (int argc, char *const *argv, const char *shortopts);
-#else /* not __GNU_LIBRARY__ */
-extern int getopt ();
-#endif /* __GNU_LIBRARY__ */
-extern int getopt_long (int argc, char *const *argv, const char *shortopts,
-		        const struct option *longopts, int *longind);
-extern int getopt_long_only (int argc, char *const *argv,
-			     const char *shortopts,
-		             const struct option *longopts, int *longind);
-
-/* Internal only.  Users should not call this directly.  */
-extern int _getopt_internal (int argc, char *const *argv,
-			     const char *shortopts,
-		             const struct option *longopts, int *longind,
-			     int long_only);
-#else /* not __STDC__ */
-extern int getopt ();
-extern int getopt_long ();
-extern int getopt_long_only ();
-
-extern int _getopt_internal ();
-#endif /* __STDC__ */
-
-#ifdef	__cplusplus
-}
-#endif
-
-#endif /* _GETOPT_H */

lib/inet_ntop.c

@@ -0,0 +1,186 @@
+/*
+ * Copyright (C) 1996-2001  Internet Software Consortium.
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND INTERNET SOFTWARE CONSORTIUM
+ * DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL
+ * INTERNET SOFTWARE CONSORTIUM BE LIABLE FOR ANY SPECIAL, DIRECT,
+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING
+ * FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,
+ * NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION
+ * WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+
+#include "rsync.h"
+
+#define NS_INT16SZ	 2
+#define NS_IN6ADDRSZ	16
+
+/*
+ * WARNING: Don't even consider trying to compile this on a system where
+ * sizeof(int) < 4.  sizeof(int) > 4 is fine; all the world's not a VAX.
+ */
+
+static const char *inet_ntop4(const unsigned char *src, char *dst,
+			      size_t size);
+
+#ifdef AF_INET6
+static const char *inet_ntop6(const unsigned char *src, char *dst,
+			      size_t size);
+#endif
+
+/* char *
+ * isc_net_ntop(af, src, dst, size)
+ *	convert a network format address to presentation format.
+ * return:
+ *	pointer to presentation format address (`dst'), or NULL (see errno).
+ * author:
+ *	Paul Vixie, 1996.
+ */
+const char *
+inet_ntop(int af, const void *src, char *dst, size_t size)
+{
+	switch (af) {
+	case AF_INET:
+		return (inet_ntop4(src, dst, size));
+#ifdef AF_INET6
+	case AF_INET6:
+		return (inet_ntop6(src, dst, size));
+#endif
+	default:
+		errno = EAFNOSUPPORT;
+		return (NULL);
+	}
+	/* NOTREACHED */
+}
+
+/* const char *
+ * inet_ntop4(src, dst, size)
+ *	format an IPv4 address
+ * return:
+ *	`dst' (as a const)
+ * notes:
+ *	(1) uses no statics
+ *	(2) takes a unsigned char* not an in_addr as input
+ * author:
+ *	Paul Vixie, 1996.
+ */
+static const char *
+inet_ntop4(const unsigned char *src, char *dst, size_t size)
+{
+	static const char *fmt = "%u.%u.%u.%u";
+	char tmp[sizeof "255.255.255.255"];
+	size_t len;
+
+	len = snprintf(tmp, sizeof tmp, fmt, src[0], src[1], src[2], src[3]);
+	if (len >= size) {
+		errno = ENOSPC;
+		return (NULL);
+	}
+	memcpy(dst, tmp, len + 1);
+
+	return (dst);
+}
+
+/* const char *
+ * isc_inet_ntop6(src, dst, size)
+ *	convert IPv6 binary address into presentation (printable) format
+ * author:
+ *	Paul Vixie, 1996.
+ */
+#ifdef AF_INET6
+static const char *
+inet_ntop6(const unsigned char *src, char *dst, size_t size)
+{
+	/*
+	 * Note that int32_t and int16_t need only be "at least" large enough
+	 * to contain a value of the specified size.  On some systems, like
+	 * Crays, there is no such thing as an integer variable with 16 bits.
+	 * Keep this in mind if you think this function should have been coded
+	 * to use pointer overlays.  All the world's not a VAX.
+	 */
+	char tmp[sizeof "ffff:ffff:ffff:ffff:ffff:ffff:255.255.255.255"], *tp;
+	struct { int base, len; } best, cur;
+	unsigned int words[NS_IN6ADDRSZ / NS_INT16SZ];
+	int i, inc;
+
+	/*
+	 * Preprocess:
+	 *	Copy the input (bytewise) array into a wordwise array.
+	 *	Find the longest run of 0x00's in src[] for :: shorthanding.
+	 */
+	memset(words, '\0', sizeof words);
+	for (i = 0; i < NS_IN6ADDRSZ; i++)
+		words[i / 2] |= (src[i] << ((1 - (i % 2)) << 3));
+	best.base = -1;
+	cur.base = -1;
+	for (i = 0; i < (NS_IN6ADDRSZ / NS_INT16SZ); i++) {
+		if (words[i] == 0) {
+			if (cur.base == -1)
+				cur.base = i, cur.len = 1;
+			else
+				cur.len++;
+		} else {
+			if (cur.base != -1) {
+				if (best.base == -1 || cur.len > best.len)
+					best = cur;
+				cur.base = -1;
+			}
+		}
+	}
+	if (cur.base != -1) {
+		if (best.base == -1 || cur.len > best.len)
+			best = cur;
+	}
+	if (best.base != -1 && best.len < 2)
+		best.base = -1;
+
+	/*
+	 * Format the result.
+	 */
+	tp = tmp;
+	for (i = 0; i < (NS_IN6ADDRSZ / NS_INT16SZ); i++) {
+		/* Are we inside the best run of 0x00's? */
+		if (best.base != -1 && i >= best.base &&
+		    i < (best.base + best.len)) {
+			if (i == best.base)
+				*tp++ = ':';
+			continue;
+		}
+		/* Are we following an initial run of 0x00s or any real hex? */
+		if (i != 0)
+			*tp++ = ':';
+		/* Is this address an encapsulated IPv4? */
+		if (i == 6 && best.base == 0 &&
+		    (best.len == 6 || (best.len == 5 && words[5] == 0xffff))) {
+			if (!inet_ntop4(src+12, tp, sizeof tmp - (tp - tmp)))
+				return (NULL);
+			tp += strlen(tp);
+			break;
+		}
+		inc = snprintf(tp, 5, "%x", words[i]);
+		assert(inc < 5);
+		tp += inc;
+	}
+	/* Was it a trailing run of 0x00's? */
+	if (best.base != -1 && (best.base + best.len) ==
+	    (NS_IN6ADDRSZ / NS_INT16SZ))
+		*tp++ = ':';
+	*tp++ = '\0';
+
+	/*
+	 * Check for overflow, copy, and we're done.
+	 */
+	if ((size_t)(tp - tmp) > size) {
+		errno = ENOSPC;
+		return (NULL);
+	}
+	memcpy(dst, tmp, tp - tmp);
+	return (dst);
+}
+#endif /* AF_INET6 */

lib/inet_pton.c

@@ -0,0 +1,212 @@
+/*
+ * Copyright (C) 1996-2001  Internet Software Consortium.
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND INTERNET SOFTWARE CONSORTIUM
+ * DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL
+ * INTERNET SOFTWARE CONSORTIUM BE LIABLE FOR ANY SPECIAL, DIRECT,
+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING
+ * FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,
+ * NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION
+ * WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "rsync.h"
+
+#define NS_INT16SZ	 2
+#define NS_INADDRSZ	 4
+#define NS_IN6ADDRSZ	16
+
+/*
+ * WARNING: Don't even consider trying to compile this on a system where
+ * sizeof(int) < 4.  sizeof(int) > 4 is fine; all the world's not a VAX.
+ */
+
+static int inet_pton4(const char *src, unsigned char *dst);
+#ifdef INET6
+static int inet_pton6(const char *src, unsigned char *dst);
+#endif
+
+/* int
+ * inet_pton(af, src, dst)
+ *	convert from presentation format (which usually means ASCII printable)
+ *	to network format (which is usually some kind of binary format).
+ * return:
+ *	1 if the address was valid for the specified address family
+ *	0 if the address wasn't valid (`dst' is untouched in this case)
+ *	-1 if some other error occurred (`dst' is untouched in this case, too)
+ * author:
+ *	Paul Vixie, 1996.
+ */
+int
+inet_pton(int af,
+	  const char *src,
+	  void *dst)
+{
+	switch (af) {
+	case AF_INET:
+		return (inet_pton4(src, dst));
+#ifdef INET6
+	case AF_INET6:
+		return (inet_pton6(src, dst));
+#endif
+	default:
+		errno = EAFNOSUPPORT;
+		return (-1);
+	}
+	/* NOTREACHED */
+}
+
+/* int
+ * inet_pton4(src, dst)
+ *	like inet_aton() but without all the hexadecimal and shorthand.
+ * return:
+ *	1 if `src' is a valid dotted quad, else 0.
+ * notice:
+ *	does not touch `dst' unless it's returning 1.
+ * author:
+ *	Paul Vixie, 1996.
+ */
+static int
+inet_pton4(src, dst)
+	const char *src;
+	unsigned char *dst;
+{
+	static const char digits[] = "0123456789";
+	int saw_digit, octets, ch;
+	unsigned char tmp[NS_INADDRSZ], *tp;
+
+	saw_digit = 0;
+	octets = 0;
+	*(tp = tmp) = 0;
+	while ((ch = *src++) != '\0') {
+		const char *pch;
+
+		if ((pch = strchr(digits, ch)) != NULL) {
+			unsigned int new = *tp * 10 + (pch - digits);
+
+			if (new > 255)
+				return (0);
+			*tp = new;
+			if (! saw_digit) {
+				if (++octets > 4)
+					return (0);
+				saw_digit = 1;
+			}
+		} else if (ch == '.' && saw_digit) {
+			if (octets == 4)
+				return (0);
+			*++tp = 0;
+			saw_digit = 0;
+		} else
+			return (0);
+	}
+	if (octets < 4)
+		return (0);
+	memcpy(dst, tmp, NS_INADDRSZ);
+	return (1);
+}
+
+/* int
+ * inet_pton6(src, dst)
+ *	convert presentation level address to network order binary form.
+ * return:
+ *	1 if `src' is a valid [RFC1884 2.2] address, else 0.
+ * notice:
+ *	(1) does not touch `dst' unless it's returning 1.
+ *	(2) :: in a full address is silently ignored.
+ * credit:
+ *	inspired by Mark Andrews.
+ * author:
+ *	Paul Vixie, 1996.
+ */
+#ifdef INET6
+static int
+inet_pton6(src, dst)
+	const char *src;
+	unsigned char *dst;
+{
+	static const char xdigits_l[] = "0123456789abcdef",
+			  xdigits_u[] = "0123456789ABCDEF";
+	unsigned char tmp[NS_IN6ADDRSZ], *tp, *endp, *colonp;
+	const char *xdigits, *curtok;
+	int ch, saw_xdigit;
+	unsigned int val;
+
+	memset((tp = tmp), '\0', NS_IN6ADDRSZ);
+	endp = tp + NS_IN6ADDRSZ;
+	colonp = NULL;
+	/* Leading :: requires some special handling. */
+	if (*src == ':')
+		if (*++src != ':')
+			return (0);
+	curtok = src;
+	saw_xdigit = 0;
+	val = 0;
+	while ((ch = *src++) != '\0') {
+		const char *pch;
+
+		if ((pch = strchr((xdigits = xdigits_l), ch)) == NULL)
+			pch = strchr((xdigits = xdigits_u), ch);
+		if (pch != NULL) {
+			val <<= 4;
+			val |= (pch - xdigits);
+			if (val > 0xffff)
+				return (0);
+			saw_xdigit = 1;
+			continue;
+		}
+		if (ch == ':') {
+			curtok = src;
+			if (!saw_xdigit) {
+				if (colonp)
+					return (0);
+				colonp = tp;
+				continue;
+			}
+			if (tp + NS_INT16SZ > endp)
+				return (0);
+			*tp++ = (unsigned char) (val >> 8) & 0xff;
+			*tp++ = (unsigned char) val & 0xff;
+			saw_xdigit = 0;
+			val = 0;
+			continue;
+		}
+		if (ch == '.' && ((tp + NS_INADDRSZ) <= endp) &&
+		    inet_pton4(curtok, tp) > 0) {
+			tp += NS_INADDRSZ;
+			saw_xdigit = 0;
+			break;	/* '\0' was seen by inet_pton4(). */
+		}
+		return (0);
+	}
+	if (saw_xdigit) {
+		if (tp + NS_INT16SZ > endp)
+			return (0);
+		*tp++ = (unsigned char) (val >> 8) & 0xff;
+		*tp++ = (unsigned char) val & 0xff;
+	}
+	if (colonp != NULL) {
+		/*
+		 * Since some memmove()'s erroneously fail to handle
+		 * overlapping regions, we'll do the shift by hand.
+		 */
+		const int n = tp - colonp;
+		int i;
+
+		for (i = 1; i <= n; i++) {
+			endp[- i] = colonp[n - i];
+			colonp[n - i] = 0;
+		}
+		tp = endp;
+	}
+	if (tp != endp)
+		return (0);
+	memcpy(dst, tmp, NS_IN6ADDRSZ);
+	return (1);
+}
+#endif

lib/md5.c

@@ -0,0 +1,304 @@
+/*
+ * RFC 1321 compliant MD5 implementation
+ *
+ * Copyright (C) 2001-2003 Christophe Devine
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, visit the http://fsf.org website.
+ */
+
+#include "rsync.h"
+
+void md5_begin(md_context *ctx)
+{
+	ctx->A = 0x67452301;
+	ctx->B = 0xEFCDAB89;
+	ctx->C = 0x98BADCFE;
+	ctx->D = 0x10325476;
+
+	ctx->totalN = ctx->totalN2 = 0;
+}
+
+static void md5_process(md_context *ctx, const uchar data[CSUM_CHUNK])
+{
+	uint32 X[16], A, B, C, D;
+
+	A = ctx->A;
+	B = ctx->B;
+	C = ctx->C;
+	D = ctx->D;
+
+	X[0] = IVAL(data, 0);
+	X[1] = IVAL(data, 4);
+	X[2] = IVAL(data, 8);
+	X[3] = IVAL(data, 12);
+	X[4] = IVAL(data, 16);
+	X[5] = IVAL(data, 20);
+	X[6] = IVAL(data, 24);
+	X[7] = IVAL(data, 28);
+	X[8] = IVAL(data, 32);
+	X[9] = IVAL(data, 36);
+	X[10] = IVAL(data, 40);
+	X[11] = IVAL(data, 44);
+	X[12] = IVAL(data, 48);
+	X[13] = IVAL(data, 52);
+	X[14] = IVAL(data, 56);
+	X[15] = IVAL(data, 60);
+
+#define S(x,n) ((x << n) | ((x & 0xFFFFFFFF) >> (32 - n)))
+
+#define P(a,b,c,d,k,s,t) a += F(b,c,d) + X[k] + t, a = S(a,s) + b
+
+#define F(x,y,z) (z ^ (x & (y ^ z)))
+
+	P(A, B, C, D,  0,  7, 0xD76AA478);
+	P(D, A, B, C,  1, 12, 0xE8C7B756);
+	P(C, D, A, B,  2, 17, 0x242070DB);
+	P(B, C, D, A,  3, 22, 0xC1BDCEEE);
+	P(A, B, C, D,  4,  7, 0xF57C0FAF);
+	P(D, A, B, C,  5, 12, 0x4787C62A);
+	P(C, D, A, B,  6, 17, 0xA8304613);
+	P(B, C, D, A,  7, 22, 0xFD469501);
+	P(A, B, C, D,  8,  7, 0x698098D8);
+	P(D, A, B, C,  9, 12, 0x8B44F7AF);
+	P(C, D, A, B, 10, 17, 0xFFFF5BB1);
+	P(B, C, D, A, 11, 22, 0x895CD7BE);
+	P(A, B, C, D, 12,  7, 0x6B901122);
+	P(D, A, B, C, 13, 12, 0xFD987193);
+	P(C, D, A, B, 14, 17, 0xA679438E);
+	P(B, C, D, A, 15, 22, 0x49B40821);
+
+#undef F
+#define F(x,y,z) (y ^ (z & (x ^ y)))
+
+	P(A, B, C, D,  1,  5, 0xF61E2562);
+	P(D, A, B, C,  6,  9, 0xC040B340);
+	P(C, D, A, B, 11, 14, 0x265E5A51);
+	P(B, C, D, A,  0, 20, 0xE9B6C7AA);
+	P(A, B, C, D,  5,  5, 0xD62F105D);
+	P(D, A, B, C, 10,  9, 0x02441453);
+	P(C, D, A, B, 15, 14, 0xD8A1E681);
+	P(B, C, D, A,  4, 20, 0xE7D3FBC8);
+	P(A, B, C, D,  9,  5, 0x21E1CDE6);
+	P(D, A, B, C, 14,  9, 0xC33707D6);
+	P(C, D, A, B,  3, 14, 0xF4D50D87);
+	P(B, C, D, A,  8, 20, 0x455A14ED);
+	P(A, B, C, D, 13,  5, 0xA9E3E905);
+	P(D, A, B, C,  2,  9, 0xFCEFA3F8);
+	P(C, D, A, B,  7, 14, 0x676F02D9);
+	P(B, C, D, A, 12, 20, 0x8D2A4C8A);
+
+#undef F
+#define F(x,y,z) (x ^ y ^ z)
+
+	P(A, B, C, D,  5,  4, 0xFFFA3942);
+	P(D, A, B, C,  8, 11, 0x8771F681);
+	P(C, D, A, B, 11, 16, 0x6D9D6122);
+	P(B, C, D, A, 14, 23, 0xFDE5380C);
+	P(A, B, C, D,  1,  4, 0xA4BEEA44);
+	P(D, A, B, C,  4, 11, 0x4BDECFA9);
+	P(C, D, A, B,  7, 16, 0xF6BB4B60);
+	P(B, C, D, A, 10, 23, 0xBEBFBC70);
+	P(A, B, C, D, 13,  4, 0x289B7EC6);
+	P(D, A, B, C,  0, 11, 0xEAA127FA);
+	P(C, D, A, B,  3, 16, 0xD4EF3085);
+	P(B, C, D, A,  6, 23, 0x04881D05);
+	P(A, B, C, D,  9,  4, 0xD9D4D039);
+	P(D, A, B, C, 12, 11, 0xE6DB99E5);
+	P(C, D, A, B, 15, 16, 0x1FA27CF8);
+	P(B, C, D, A,  2, 23, 0xC4AC5665);
+
+#undef F
+#define F(x,y,z) (y ^ (x | ~z))
+
+	P(A, B, C, D,  0,  6, 0xF4292244);
+	P(D, A, B, C,  7, 10, 0x432AFF97);
+	P(C, D, A, B, 14, 15, 0xAB9423A7);
+	P(B, C, D, A,  5, 21, 0xFC93A039);
+	P(A, B, C, D, 12,  6, 0x655B59C3);
+	P(D, A, B, C,  3, 10, 0x8F0CCC92);
+	P(C, D, A, B, 10, 15, 0xFFEFF47D);
+	P(B, C, D, A,  1, 21, 0x85845DD1);
+	P(A, B, C, D,  8,  6, 0x6FA87E4F);
+	P(D, A, B, C, 15, 10, 0xFE2CE6E0);
+	P(C, D, A, B,  6, 15, 0xA3014314);
+	P(B, C, D, A, 13, 21, 0x4E0811A1);
+	P(A, B, C, D,  4,  6, 0xF7537E82);
+	P(D, A, B, C, 11, 10, 0xBD3AF235);
+	P(C, D, A, B,  2, 15, 0x2AD7D2BB);
+	P(B, C, D, A,  9, 21, 0xEB86D391);
+
+#undef F
+
+	ctx->A += A;
+	ctx->B += B;
+	ctx->C += C;
+	ctx->D += D;
+}
+
+void md5_update(md_context *ctx, const uchar *input, uint32 length)
+{
+	uint32 left, fill;
+
+	if (!length)
+		return;
+
+	left = ctx->totalN & 0x3F;
+	fill = CSUM_CHUNK - left;
+
+	ctx->totalN += length;
+	ctx->totalN &= 0xFFFFFFFF;
+
+	if (ctx->totalN < length)
+		ctx->totalN2++;
+
+	if (left && length >= fill) {
+		memcpy(ctx->buffer + left, input, fill);
+		md5_process(ctx, ctx->buffer);
+		length -= fill;
+		input  += fill;
+		left = 0;
+	}
+
+	while (length >= CSUM_CHUNK) {
+		md5_process(ctx, input);
+		length -= CSUM_CHUNK;
+		input  += CSUM_CHUNK;
+	}
+
+	if (length)
+		memcpy(ctx->buffer + left, input, length);
+}
+
+static uchar md5_padding[CSUM_CHUNK] = { 0x80 };
+
+void md5_result(md_context *ctx, uchar digest[MD5_DIGEST_LEN])
+{
+	uint32 last, padn;
+	uint32 high, low;
+	uchar msglen[8];
+
+	high = (ctx->totalN >> 29)
+	     | (ctx->totalN2 <<  3);
+	low  = (ctx->totalN <<  3);
+
+	SIVAL(msglen, 0, low);
+	SIVAL(msglen, 4, high);
+
+	last = ctx->totalN & 0x3F;
+	padn = last < 56 ? 56 - last : 120 - last;
+
+	md5_update(ctx, md5_padding, padn);
+	md5_update(ctx, msglen, 8);
+
+	SIVAL(digest, 0, ctx->A);
+	SIVAL(digest, 4, ctx->B);
+	SIVAL(digest, 8, ctx->C);
+	SIVAL(digest, 12, ctx->D);
+}
+
+void get_md5(uchar *out, const uchar *input, int n)
+{
+	md_context ctx;
+	md5_begin(&ctx);
+	md5_update(&ctx, input, n);
+	md5_result(&ctx, out);
+}
+
+#ifdef TEST_MD5
+
+#include <stdlib.h>
+#include <stdio.h>
+
+/*
+ * those are the standard RFC 1321 test vectors
+ */
+
+static struct {
+    char *str, *md5;
+} tests[] = {
+ { "",
+   "d41d8cd98f00b204e9800998ecf8427e" },
+ { "a",
+   "0cc175b9c0f1b6a831c399e269772661" },
+ { "abc",
+   "900150983cd24fb0d6963f7d28e17f72" },
+ { "message digest",
+   "f96b697d7cb7938d525a2f31aaf161d0" },
+ { "abcdefghijklmnopqrstuvwxyz",
+   "c3fcd3d76192e4007dfb496cca67e13b" },
+ { "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789",
+   "d174ab98d277d9f5a5611c2c9f419d9f" },
+ { "12345678901234567890123456789012345678901234567890123456789012345678901234567890",
+   "57edf4a22be3c955ac49da2e2107b67a" },
+ { NULL, NULL }
+};
+
+int main(int argc, char *argv[])
+{
+	FILE *f;
+	int i, j;
+	char output[33];
+	md_context ctx;
+	uchar buf[1000];
+	uchar md5sum[MD5_DIGEST_LEN];
+
+	if (argc < 2) {
+		printf("\nMD5 Validation Tests:\n\n");
+
+		for (i = 0; tests[i].str; i++) {
+			char *str = tests[i].str;
+			char *chk = tests[i].md5;
+
+			printf("  Test %d ", i + 1);
+
+			get_md5(md5sum, str, strlen(str));
+
+			for (j = 0; j < MD5_DIGEST_LEN; j++)
+				sprintf(output + j * 2, "%02x", md5sum[j]);
+
+			if (memcmp(output, chk, 32)) {
+				printf("failed!\n");
+				return 1;
+			}
+
+			printf("passed.\n");
+		}
+
+		printf("\n");
+		return 0;
+	}
+
+	while (--argc) {
+		if (!(f = fopen(*++argv, "rb"))) {
+			perror("fopen");
+			return 1;
+		}
+
+		md5_begin(&ctx);
+
+		while ((i = fread(buf, 1, sizeof buf, f)) > 0)
+			md5_update(&ctx, buf, i);
+
+		md5_result(&ctx, md5sum);
+
+		for (j = 0; j < MD5_DIGEST_LEN; j++)
+			printf("%02x", md5sum[j]);
+
+		printf("  %s\n", *argv);
+	}
+
+	return 0;
+}
+
+#endif

lib/mdfour.c

@@ -1,110 +1,100 @@
 /* 
-   Unix SMB/Netbios implementation.
-   Version 1.9.
-   a implementation of MD4 designed for use in the SMB authentication protocol
-   Copyright (C) Andrew Tridgell 1997-1998.
-   
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2 of the License, or
-   (at your option) any later version.
-   
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-   
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
+ * Unix SMB/Netbios implementation.
+ * Version 1.9.
+ * An implementation of MD4 designed for use in the SMB authentication protocol.
+ *
+ * Copyright (C) 1997-1998 Andrew Tridgell
+ * Copyright (C) 2005-2008 Wayne Davison
+ * 
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3 of the License, or
+ * (at your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, visit the http://fsf.org website.
+ */
 
 #include "rsync.h"
 
 /* NOTE: This code makes no attempt to be fast! 
+ *
+ * It assumes that a int is at least 32 bits long. */
 
-   It assumes that a int is at least 32 bits long
-*/
+static md_context *m;
 
-static struct mdfour *m;
+#define MASK32 (0xffffffff)
 
-#define F(X,Y,Z) (((X)&(Y)) | ((~(X))&(Z)))
-#define G(X,Y,Z) (((X)&(Y)) | ((X)&(Z)) | ((Y)&(Z)))
-#define H(X,Y,Z) ((X)^(Y)^(Z))
-#ifdef LARGE_INT32
-#define lshift(x,s) ((((x)<<(s))&0xFFFFFFFF) | (((x)>>(32-(s)))&0xFFFFFFFF))
-#else
-#define lshift(x,s) (((x)<<(s)) | ((x)>>(32-(s))))
-#endif
+#define F(X,Y,Z) ((((X)&(Y)) | ((~(X))&(Z))))
+#define G(X,Y,Z) ((((X)&(Y)) | ((X)&(Z)) | ((Y)&(Z))))
+#define H(X,Y,Z) (((X)^(Y)^(Z)))
+#define lshift(x,s) (((((x)<<(s))&MASK32) | (((x)>>(32-(s)))&MASK32)))
 
-#define ROUND1(a,b,c,d,k,s) a = lshift(a + F(b,c,d) + X[k], s)
-#define ROUND2(a,b,c,d,k,s) a = lshift(a + G(b,c,d) + X[k] + 0x5A827999,s)
-#define ROUND3(a,b,c,d,k,s) a = lshift(a + H(b,c,d) + X[k] + 0x6ED9EBA1,s)
+#define ROUND1(a,b,c,d,k,s) a = lshift((a + F(b,c,d) + M[k])&MASK32, s)
+#define ROUND2(a,b,c,d,k,s) a = lshift((a + G(b,c,d) + M[k] + 0x5A827999)&MASK32,s)
+#define ROUND3(a,b,c,d,k,s) a = lshift((a + H(b,c,d) + M[k] + 0x6ED9EBA1)&MASK32,s)
 
 /* this applies md4 to 64 byte chunks */
 static void mdfour64(uint32 *M)
 {
-	int j;
 	uint32 AA, BB, CC, DD;
-	uint32 X[16];
 	uint32 A,B,C,D;
 
-	for (j=0;j<16;j++)
-		X[j] = M[j];
-
 	A = m->A; B = m->B; C = m->C; D = m->D; 
 	AA = A; BB = B; CC = C; DD = D;
 
-        ROUND1(A,B,C,D,  0,  3);  ROUND1(D,A,B,C,  1,  7);  
+	ROUND1(A,B,C,D,  0,  3);  ROUND1(D,A,B,C,  1,  7);  
 	ROUND1(C,D,A,B,  2, 11);  ROUND1(B,C,D,A,  3, 19);
-        ROUND1(A,B,C,D,  4,  3);  ROUND1(D,A,B,C,  5,  7);  
+	ROUND1(A,B,C,D,  4,  3);  ROUND1(D,A,B,C,  5,  7);  
 	ROUND1(C,D,A,B,  6, 11);  ROUND1(B,C,D,A,  7, 19);
-        ROUND1(A,B,C,D,  8,  3);  ROUND1(D,A,B,C,  9,  7);  
+	ROUND1(A,B,C,D,  8,  3);  ROUND1(D,A,B,C,  9,  7);  
 	ROUND1(C,D,A,B, 10, 11);  ROUND1(B,C,D,A, 11, 19);
-        ROUND1(A,B,C,D, 12,  3);  ROUND1(D,A,B,C, 13,  7);  
+	ROUND1(A,B,C,D, 12,  3);  ROUND1(D,A,B,C, 13,  7);  
 	ROUND1(C,D,A,B, 14, 11);  ROUND1(B,C,D,A, 15, 19);	
 
-        ROUND2(A,B,C,D,  0,  3);  ROUND2(D,A,B,C,  4,  5);  
+	ROUND2(A,B,C,D,  0,  3);  ROUND2(D,A,B,C,  4,  5);  
 	ROUND2(C,D,A,B,  8,  9);  ROUND2(B,C,D,A, 12, 13);
-        ROUND2(A,B,C,D,  1,  3);  ROUND2(D,A,B,C,  5,  5);  
+	ROUND2(A,B,C,D,  1,  3);  ROUND2(D,A,B,C,  5,  5);  
 	ROUND2(C,D,A,B,  9,  9);  ROUND2(B,C,D,A, 13, 13);
-        ROUND2(A,B,C,D,  2,  3);  ROUND2(D,A,B,C,  6,  5);  
+	ROUND2(A,B,C,D,  2,  3);  ROUND2(D,A,B,C,  6,  5);  
 	ROUND2(C,D,A,B, 10,  9);  ROUND2(B,C,D,A, 14, 13);
-        ROUND2(A,B,C,D,  3,  3);  ROUND2(D,A,B,C,  7,  5);  
+	ROUND2(A,B,C,D,  3,  3);  ROUND2(D,A,B,C,  7,  5);  
 	ROUND2(C,D,A,B, 11,  9);  ROUND2(B,C,D,A, 15, 13);
 
 	ROUND3(A,B,C,D,  0,  3);  ROUND3(D,A,B,C,  8,  9);  
 	ROUND3(C,D,A,B,  4, 11);  ROUND3(B,C,D,A, 12, 15);
-        ROUND3(A,B,C,D,  2,  3);  ROUND3(D,A,B,C, 10,  9);  
+	ROUND3(A,B,C,D,  2,  3);  ROUND3(D,A,B,C, 10,  9);  
 	ROUND3(C,D,A,B,  6, 11);  ROUND3(B,C,D,A, 14, 15);
-        ROUND3(A,B,C,D,  1,  3);  ROUND3(D,A,B,C,  9,  9);  
+	ROUND3(A,B,C,D,  1,  3);  ROUND3(D,A,B,C,  9,  9);  
 	ROUND3(C,D,A,B,  5, 11);  ROUND3(B,C,D,A, 13, 15);
-        ROUND3(A,B,C,D,  3,  3);  ROUND3(D,A,B,C, 11,  9);  
+	ROUND3(A,B,C,D,  3,  3);  ROUND3(D,A,B,C, 11,  9);  
 	ROUND3(C,D,A,B,  7, 11);  ROUND3(B,C,D,A, 15, 15);
 
-	A += AA; B += BB; C += CC; D += DD;
+	A += AA; B += BB; 
+	C += CC; D += DD;
 	
-#ifdef LARGE_INT32
-	A &= 0xFFFFFFFF; B &= 0xFFFFFFFF;
-	C &= 0xFFFFFFFF; D &= 0xFFFFFFFF;
-#endif
-
-	for (j=0;j<16;j++)
-		X[j] = 0;
+	A &= MASK32; B &= MASK32; 
+	C &= MASK32; D &= MASK32;
 
 	m->A = A; m->B = B; m->C = C; m->D = D;
 }
 
-static void copy64(uint32 *M, unsigned char *in)
+static void copy64(uint32 *M, const uchar *in)
 {
 	int i;
 
-	for (i=0;i<16;i++)
-		M[i] = (in[i*4+3]<<24) | (in[i*4+2]<<16) |
-			(in[i*4+1]<<8) | (in[i*4+0]<<0);
+	for (i = 0; i < MD4_DIGEST_LEN; i++) {
+		M[i] = (in[i*4+3] << 24) | (in[i*4+2] << 16)
+		     | (in[i*4+1] << 8)  | (in[i*4+0] << 0);
+	}
 }
 
-static void copy4(unsigned char *out,uint32 x)
+static void copy4(uchar *out,uint32 x)
 {
 	out[0] = x&0xFF;
 	out[1] = (x>>8)&0xFF;
@@ -112,36 +102,57 @@ static void copy4(unsigned char *out,uint32 x)
 	out[3] = (x>>24)&0xFF;
 }
 
-void mdfour_begin(struct mdfour *md)
+void mdfour_begin(md_context *md)
 {
 	md->A = 0x67452301;
 	md->B = 0xefcdab89;
 	md->C = 0x98badcfe;
 	md->D = 0x10325476;
 	md->totalN = 0;
+	md->totalN2 = 0;
 }
 
-
-static void mdfour_tail(unsigned char *in, int n)
+static void mdfour_tail(const uchar *in, uint32 length)
 {
-	unsigned char buf[128];
+	uchar buf[128];
 	uint32 M[16];
-	uint32 b;
+	extern int protocol_version;
 
-	m->totalN += n;
-
-	b = m->totalN * 8;
+	/*
+	 * Count total number of bits, modulo 2^64
+	 */
+	m->totalN += length << 3;
+	if (m->totalN < (length << 3))
+		m->totalN2++;
+	m->totalN2 += length >> 29;
 
 	memset(buf, 0, 128);
-	if (n) memcpy(buf, in, n);
-	buf[n] = 0x80;
+	if (length)
+		memcpy(buf, in, length);
+	buf[length] = 0x80;
 
-	if (n <= 55) {
-		copy4(buf+56, b);
+	if (length <= 55) {
+		copy4(buf+56, m->totalN);
+		/*
+		 * Prior to protocol version 27 only the number of bits
+		 * modulo 2^32 was included.  MD4 requires the number
+		 * of bits modulo 2^64, which was fixed starting with
+		 * protocol version 27.
+		 */
+		if (protocol_version >= 27)
+			copy4(buf+60, m->totalN2);
 		copy64(M, buf);
 		mdfour64(M);
 	} else {
-		copy4(buf+120, b); 
+		copy4(buf+120, m->totalN); 
+		/*
+		 * Prior to protocol version 27 only the number of bits
+		 * modulo 2^32 was included.  MD4 requires the number
+		 * of bits modulo 2^64, which was fixed starting with
+		 * protocol version 27.
+		 */
+		if (protocol_version >= 27)
+			copy4(buf+124, m->totalN2); 
 		copy64(M, buf);
 		mdfour64(M);
 		copy64(M, buf+64);
@@ -149,51 +160,55 @@ static void mdfour_tail(unsigned char *in, int n)
 	}
 }
 
-void mdfour_update(struct mdfour *md, unsigned char *in, int n)
+void mdfour_update(md_context *md, const uchar *in, uint32 length)
 {
 	uint32 M[16];
 
-	if (n == 0) mdfour_tail(in, n);
-
 	m = md;
 
-	while (n >= 64) {
+	if (length == 0)
+		mdfour_tail(in, length);
+
+	while (length >= 64) {
 		copy64(M, in);
 		mdfour64(M);
 		in += 64;
-		n -= 64;
-		m->totalN += 64;
+		length -= 64;
+		m->totalN += 64 << 3;
+		if (m->totalN < 64 << 3)
+			m->totalN2++;
 	}
 
-	if (n) mdfour_tail(in, n);
+	if (length)
+		mdfour_tail(in, length);
 }
 
-
-void mdfour_result(struct mdfour *md, unsigned char *out)
+void mdfour_result(md_context *md, uchar digest[MD4_DIGEST_LEN])
 {
 	m = md;
 
-	copy4(out, m->A);
-	copy4(out+4, m->B);
-	copy4(out+8, m->C);
-	copy4(out+12, m->D);
+	copy4(digest, m->A);
+	copy4(digest+4, m->B);
+	copy4(digest+8, m->C);
+	copy4(digest+12, m->D);
 }
 
-
-void mdfour(unsigned char *out, unsigned char *in, int n)
+void mdfour(uchar digest[MD4_DIGEST_LEN], uchar *in, int length)
 {
-	struct mdfour md;
+	md_context md;
 	mdfour_begin(&md);
-	mdfour_update(&md, in, n);
-	mdfour_result(&md, out);
+	mdfour_update(&md, in, length);
+	mdfour_result(&md, digest);
 }
 
 #ifdef TEST_MDFOUR
+int protocol_version = 28;
+
 static void file_checksum1(char *fname)
 {
-	int fd, i;
-	struct mdfour md;
-	unsigned char buf[64*1024], sum[16];
+	int fd, i, was_multiple_of_64 = 1;
+	md_context md;
+	uchar buf[64*1024], sum[MD4_DIGEST_LEN];
 	
 	fd = open(fname,O_RDONLY);
 	if (fd == -1) {
@@ -204,63 +219,28 @@ static void file_checksum1(char *fname)
 	mdfour_begin(&md);
 
 	while (1) {
-		int n = read(fd, buf, sizeof(buf));
-		if (n <= 0) break;
+		int n = read(fd, buf, sizeof buf);
+		if (n <= 0)
+			break;
+		was_multiple_of_64 = !(n % 64);
 		mdfour_update(&md, buf, n);
 	}
+	if (was_multiple_of_64 && protocol_version >= 27)
+		mdfour_update(&md, buf, 0);
 
 	close(fd);
 
 	mdfour_result(&md, sum);
 
-	for (i=0;i<16;i++)
+	for (i = 0; i < MD4_DIGEST_LEN; i++)
 		printf("%02X", sum[i]);
 	printf("\n");
 }
 
-#if 0
-#include "../md4.h"
-
-static void file_checksum2(char *fname)
-{
-	int fd, i;
-	MDstruct md;
-	unsigned char buf[64], sum[16];
-
-	fd = open(fname,O_RDONLY);
-	if (fd == -1) {
-		perror("fname");
-		exit(1);
-	}
-	
-	MDbegin(&md);
-
-	while (1) {
-		int n = read(fd, buf, sizeof(buf));
-		if (n <= 0) break;
-		MDupdate(&md, buf, n*8);
-	}
-
-	if (!md.done) {
-		MDupdate(&md, buf, 0);
-	}
-
-	close(fd);
-
-	memcpy(sum, md.buffer, 16);
-
-	for (i=0;i<16;i++)
-		printf("%02X", sum[i]);
-	printf("\n");
-}
-#endif
-
  int main(int argc, char *argv[])
 {
-	file_checksum1(argv[1]);
-#if 0
-	file_checksum2(argv[1]);
-#endif
+	while (--argc)
+		file_checksum1(*++argv);
 	return 0;
 }
 #endif

lib/mdfour.h

@@ -1,34 +0,0 @@
-/* 
-   Unix SMB/Netbios implementation.
-   Version 1.9.
-   a implementation of MD4 designed for use in the SMB authentication protocol
-   Copyright (C) Andrew Tridgell 1997-1998.
-   
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2 of the License, or
-   (at your option) any later version.
-   
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-   
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-struct mdfour {
-	uint32 A, B, C, D;
-	uint32 totalN;
-};
-
-void mdfour_begin(struct mdfour *md);
-void mdfour_update(struct mdfour *md, unsigned char *in, int n);
-void mdfour_result(struct mdfour *md, unsigned char *out);
-void mdfour(unsigned char *out, unsigned char *in, int n);
-
-
-
-

lib/mdigest.h

@@ -0,0 +1,26 @@
+/* The include file for both the MD4 and MD5 routines. */
+
+#define MD4_DIGEST_LEN 16
+#define MD5_DIGEST_LEN 16
+#define MAX_DIGEST_LEN MD5_DIGEST_LEN
+
+#define CSUM_CHUNK 64
+
+typedef struct {
+	uint32 A, B, C, D;
+	uint32 totalN;          /* bit count, lower 32 bits */
+	uint32 totalN2;         /* bit count, upper 32 bits */
+	uchar buffer[CSUM_CHUNK];
+} md_context;
+
+void mdfour_begin(md_context *md);
+void mdfour_update(md_context *md, const uchar *in, uint32 length);
+void mdfour_result(md_context *md, uchar digest[MD4_DIGEST_LEN]);
+
+void get_mdfour(uchar digest[MD4_DIGEST_LEN], const uchar *in, int length);
+
+void md5_begin(md_context *ctx);
+void md5_update(md_context *ctx, const uchar *input, uint32 length);
+void md5_result(md_context *ctx, uchar digest[MD5_DIGEST_LEN]);
+
+void get_md5(uchar digest[MD5_DIGEST_LEN], const uchar *input, int n);

lib/permstring.c

@@ -0,0 +1,65 @@
+/*
+ * A single utility routine.
+ *
+ * Copyright (C) 1996 Andrew Tridgell
+ * Copyright (C) 1996 Paul Mackerras
+ * Copyright (C) 2001 Martin Pool <mbp@samba.org>
+ * Copyright (C) 2003, 2006 Wayne Davison
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, visit the http://fsf.org website.
+ */
+
+#include "rsync.h"
+
+/* Produce a string representation of Unix mode bits like that used by ls(1).
+ * The "buf" buffer must be at least 11 characters. */
+void permstring(char *perms, mode_t mode)
+{
+	static const char *perm_map = "rwxrwxrwx";
+	int i;
+
+	strlcpy(perms, "----------", 11);
+
+	for (i = 0; i < 9; i++) {
+		if (mode & (1 << i))
+			perms[9-i] = perm_map[8-i];
+	}
+
+	/* Handle setuid/sticky bits.  You might think the indices are
+	 * off by one, but remember there's a type char at the
+	 * start.  */
+	if (mode & S_ISUID)
+		perms[3] = (mode & S_IXUSR) ? 's' : 'S';
+
+	if (mode & S_ISGID)
+		perms[6] = (mode & S_IXGRP) ? 's' : 'S';
+
+#ifdef S_ISVTX
+	if (mode & S_ISVTX)
+		perms[9] = (mode & S_IXOTH) ? 't' : 'T';
+#endif
+
+	if (S_ISDIR(mode))
+		perms[0] = 'd';
+	else if (S_ISLNK(mode))
+		perms[0] = 'l';
+	else if (S_ISBLK(mode))
+		perms[0] = 'b';
+	else if (S_ISCHR(mode))
+		perms[0] = 'c';
+	else if (S_ISSOCK(mode))
+		perms[0] = 's';
+	else if (S_ISFIFO(mode))
+		perms[0] = 'p';
+}

lib/permstring.h

@@ -0,0 +1,3 @@
+#define PERMSTRING_SIZE 11
+
+void permstring(char *perms, mode_t mode);

lib/pool_alloc.3

@@ -0,0 +1,254 @@
+.ds d \-\^\-
+.ds o \fR[\fP
+.ds c \fR]\fP
+.ds | \fR|\fP
+.de D
+\\.B \*d\\$1
+..
+.de DI
+\\.BI \*d\\$1 \\$2
+..
+.de DR
+\\.BR \*d\\$1 \\$2
+..
+.de Di
+\\.BI \*d\\$1 " \\$2"
+..
+.de Db
+\\.B \*d\\$1 " \\$2"
+..
+.de Df
+\\.B \*d\*ono\*c\\$1
+..
+.de See
+See \fB\\$1\fP for details.
+..
+.de SeeIn
+See \fB\\$1\fP in \fB\\$2\fP for details.
+..
+.TH POOL_ALLOC 3
+.SH NAME
+pool_alloc, pool_free, pool_free_old, pool_talloc, pool_tfree, pool_create, pool_destroy, pool_boundary
+\- Allocate and free memory in managed allocation pools.
+.SH SYNOPSIS
+.B #include "pool_alloc.h"
+
+\fBstruct alloc_pool *pool_create(size_t \fIsize\fB, size_t \fIquantum\fB, void (*\fIbomb\fB)(char *), int \fIflags\fB);
+
+\fBvoid pool_destroy(struct alloc_pool *\fIpool\fB);
+
+\fBvoid *pool_alloc(struct alloc_pool *\fIpool\fB, size_t \fIsize\fB, char *\fImsg\fB);
+
+\fBvoid pool_free(struct alloc_pool *\fIpool\fB, size_t \fIsize\fB, void *\fIaddr\fB);
+
+\fBvoid pool_free_old(struct alloc_pool *\fIpool\fB, void *\fIaddr\fB);
+
+\fBvoid *pool_talloc(struct alloc_pool *\fIpool\fB, \fItype\fB), int \fIcount\fB, char *\fImsg\fB);
+
+\fBvoid pool_tfree(struct alloc_pool *\fIpool\fB, \fItype\fB, int \fIcount\fB, void *\fIaddr\fB);
+
+\fBvoid pool_boundary(struct alloc_pool *\fIpool\fB, sise_t \fIsize\fB);
+.SH DESCRIPTION
+.P
+The pool allocation routines use
+.B malloc()
+for underlying memory management.
+What allocation pools do is cause memory within a given pool
+to be allocated in large contiguous blocks
+(called extents) that will be reusable when freed.  Unlike
+.BR malloc() ,
+the allocations are not managed individually.
+Instead, each extent tracks the total free memory within the
+extent.  Each extent can either be used to allocate memory
+or to manage the freeing of memory within that extent.
+When an extent has less free memory than a given
+allocation request, the current extent ceases to be used
+for allocation.  See also the
+.B pool_boundary()
+function.
+.P
+This form of memory management is suited to large numbers of small
+related allocations that are held for a while
+and then freed as a group.
+Because the
+underlying allocations are done in large contiguous extents,
+when an extent is freed, it can release a large enough
+contiguous block of memory to allow the memory to be returned
+to the OS for use by whatever program needs it.
+You can allocate from one or more memory pools and/or
+.B malloc()
+all at the same time without interfering with how pools work.
+.P
+.B pool_create()
+Creates an allocation pool for subsequent calls to the pool
+allocation functions.
+When an extent is created for allocations it will be
+.I size 
+bytes.
+Allocations from the pool have their sizes rounded up to a
+multiple of
+.I quantum
+bytes in length.
+Specifying
+.B 0
+for
+.I quantum
+will produce a quantum that should meet maximal alignment
+on most platforms.
+If
+.B POOL_QALIGN
+is set in the
+.IR flags ,
+allocations will be aligned to addresses that are a
+multiple of
+.IR quantum .
+If
+.B POOL_CLEAR
+is set in the
+.IR flags ,
+all allocations from the pool will be initialized to zeros.
+You may specify a
+.B NULL
+for the
+.I bomb
+function pointer if you don't wish to use it.  (See the
+.B pool_alloc()
+function for how it is used.)
+.P
+.B pool_destroy()
+destroys an allocation
+.I pool
+and frees all its associated memory.
+.P
+.B pool_alloc()
+allocates
+.I size
+bytes from the specified
+.IR pool .
+If
+.I size
+is
+.BR 0 ,
+.I quantum
+bytes will be allocated.
+If the pool has been created with
+.BR POOL_QALIGN ,
+every chunk of memory that is returned will be suitably aligned.
+You can use this with the default
+.I quantum
+size to ensure that all memory can store a variable of any type.
+If the requested memory cannot be allocated, the
+.I bomb()
+function will be called with
+.I msg
+as its sole argument (if the function was defined at the time
+the pool was created), and then a
+.B NULL
+address is returned (assuming that the bomb function didn't exit).
+.P
+.B pool_free()
+frees
+.I size
+bytes pointed to by an
+.I addr
+that was previously allocated in the specified
+.IR pool .
+If
+.I size
+is
+.BR 0 ,
+.I quantum
+bytes will be freed.
+The memory freed within an extent will not be reusable until
+all of the memory in that extent has been freed with one
+exception: the most recent pool allocation may be freed back
+into the pool prior to making any further allocations.
+If enough free calls are made to indicate that an extent has no
+remaining allocated objects (as computed by the total freed size for
+an extent), its memory will be completely freed back to the system.
+If
+.I addr
+is
+.BR 0 ,
+no memory will be freed, but subsequent allocations will come
+from a new extent.
+.P
+.B pool_free_old()
+takes a boundary
+.I addr
+value that was returned by
+.B pool_boundary()
+and frees up any extents in the
+.I pool
+that have data allocated from that point backward in time.
+NOTE: you must NOT mix calls to both
+.B pool_free
+and
+.B pool_free_old
+on the same pool!
+.P
+.B pool_boundary()
+asks for a boundary value that can be sent to 
+.B pool_free_old()
+at a later time to free up all memory allocated prior to a particular
+moment in time.
+If the extent that holds the boundary point has allocations from after the
+boundary point, it will not be freed until a future
+.B pool_free_old()
+call encompasses the entirety of the extent's data.
+If
+.I len
+is non-zero, the call will also check if the active extent has at least
+that much free memory available in it, and if not, it will mark the
+extent as inactive, forcing a new extent to be used for future allocations.
+(You can specify -1 for
+.I len
+if you want to force a new extent to start.)
+.P
+.B pool_talloc()
+is a macro that takes a
+.I type
+and a
+.I count
+instead of a
+.IR size .
+It casts the return value to the correct pointer type.
+.P
+.B pool_tfree
+is a macro that calls
+.B pool_free
+on memory that was allocated by
+.BR pool_talloc() .
+.SH RETURN VALUE
+.B pool_create()
+returns a pointer to
+.BR "struct alloc_pool" .
+.P
+.B pool_alloc()
+and
+.B pool_talloc()
+return pointers to the allocated memory,
+or NULL if the request fails.
+The return type of
+.B pool_alloc()
+will normally require casting to the desired type but
+.B pool_talloc()
+will returns a pointer of the requested
+.IR type .
+.P
+.B pool_boundary()
+returns a pointer that should only be used in a call to
+.BR pool_free_old() .
+.P
+.BR pool_free() ,
+.BR pool_free_old() ,
+.B pool_tfree()
+and
+.B pool_destroy()
+return no value.
+.SH SEE ALSO
+.nf
+malloc(3)
+.SH AUTHOR
+pool_alloc was created by J.W. Schultz of Pegasystems Technologies.
+.SH BUGS AND ISSUES

lib/pool_alloc.c

@@ -0,0 +1,336 @@
+#include "rsync.h"
+
+#define POOL_DEF_EXTENT	(32 * 1024)
+
+struct alloc_pool
+{
+	size_t			size;		/* extent size		*/
+	size_t			quantum;	/* allocation quantum	*/
+	struct pool_extent	*extents;	/* top extent is "live" */
+	void			(*bomb)();	/* function to call if
+						 * malloc fails		*/
+	int			flags;
+
+	/* statistical data */
+	unsigned long		e_created;	/* extents created	*/
+	unsigned long		e_freed;	/* extents detroyed	*/
+	int64			n_allocated;	/* calls to alloc	*/
+	int64			n_freed;	/* calls to free	*/
+	int64			b_allocated;	/* cum. bytes allocated	*/
+	int64			b_freed;	/* cum. bytes freed	*/
+};
+
+struct pool_extent
+{
+	void			*start;		/* starting address	*/
+	size_t			free;		/* free bytecount	*/
+	size_t			bound;		/* bytes bound by padding,
+						 * overhead and freed	*/
+	struct pool_extent	*next;
+};
+
+struct align_test {
+	void *foo;
+	int64 bar;
+};
+
+#define MINALIGN	offsetof(struct align_test, bar)
+
+/* Temporarily cast a void* var into a char* var when adding an offset (to
+ * keep some compilers from complaining about the pointer arithmetic). */
+#define PTR_ADD(b,o)	( (void*) ((char*)(b) + (o)) )
+
+alloc_pool_t
+pool_create(size_t size, size_t quantum, void (*bomb)(const char *), int flags)
+{
+	struct alloc_pool	*pool;
+
+	if (!(pool = new(struct alloc_pool)))
+		return pool;
+	memset(pool, 0, sizeof (struct alloc_pool));
+
+	pool->size = size	/* round extent size to min alignment reqs */
+	    ? (size + MINALIGN - 1) & ~(MINALIGN - 1)
+	    : POOL_DEF_EXTENT;
+	if (flags & POOL_INTERN) {
+		pool->size -= sizeof (struct pool_extent);
+		flags |= POOL_APPEND;
+	}
+	pool->quantum = quantum ? quantum : MINALIGN;
+	pool->bomb = bomb;
+	pool->flags = flags;
+
+	return pool;
+}
+
+void
+pool_destroy(alloc_pool_t p)
+{
+	struct alloc_pool *pool = (struct alloc_pool *) p;
+	struct pool_extent	*cur, *next;
+
+	if (!pool)
+		return;
+
+	for (cur = pool->extents; cur; cur = next) {
+		next = cur->next;
+		free(cur->start);
+		if (!(pool->flags & POOL_APPEND))
+			free(cur);
+	}
+	free(pool);
+}
+
+void *
+pool_alloc(alloc_pool_t p, size_t len, const char *bomb_msg)
+{
+	struct alloc_pool *pool = (struct alloc_pool *) p;
+	if (!pool)
+		return NULL;
+
+	if (!len)
+		len = pool->quantum;
+	else if (pool->quantum > 1 && len % pool->quantum)
+		len += pool->quantum - len % pool->quantum;
+
+	if (len > pool->size)
+		goto bomb_out;
+
+	if (!pool->extents || len > pool->extents->free) {
+		void	*start;
+		size_t	free;
+		size_t	bound;
+		size_t	skew;
+		size_t	asize;
+		struct pool_extent *ext;
+
+		free = pool->size;
+		bound = 0;
+
+		asize = pool->size;
+		if (pool->flags & POOL_APPEND)
+			asize += sizeof (struct pool_extent);
+
+		if (!(start = new_array(char, asize)))
+			goto bomb_out;
+
+		if (pool->flags & POOL_CLEAR)
+			memset(start, 0, free);
+
+		if (pool->flags & POOL_APPEND)
+			ext = PTR_ADD(start, free);
+		else if (!(ext = new(struct pool_extent)))
+			goto bomb_out;
+		if (pool->flags & POOL_QALIGN && pool->quantum > 1
+		    && (skew = (size_t)PTR_ADD(start, free) % pool->quantum)) {
+			bound  += skew;
+			free -= skew;
+		}
+		ext->start = start;
+		ext->free = free;
+		ext->bound = bound;
+		ext->next = pool->extents;
+		pool->extents = ext;
+
+		pool->e_created++;
+	}
+
+	pool->n_allocated++;
+	pool->b_allocated += len;
+
+	pool->extents->free -= len;
+
+	return PTR_ADD(pool->extents->start, pool->extents->free);
+
+  bomb_out:
+	if (pool->bomb)
+		(*pool->bomb)(bomb_msg);
+	return NULL;
+}
+
+/* This function allows you to declare memory in the pool that you are done
+ * using.  If you free all the memory in a pool's extent, that extent will
+ * be freed. */
+void
+pool_free(alloc_pool_t p, size_t len, void *addr)
+{
+	struct alloc_pool *pool = (struct alloc_pool *)p;
+	struct pool_extent *cur, *prev;
+
+	if (!pool)
+		return;
+
+	if (!len)
+		len = pool->quantum;
+	else if (pool->quantum > 1 && len % pool->quantum)
+		len += pool->quantum - len % pool->quantum;
+
+	pool->n_freed++;
+	pool->b_freed += len;
+
+	for (prev = NULL, cur = pool->extents; cur; prev = cur, cur = cur->next) {
+		if (addr >= cur->start
+		    && addr < PTR_ADD(cur->start, pool->size))
+			break;
+	}
+	if (!cur)
+		return;
+
+	if (!prev) {
+		/* The "live" extent is kept ready for more allocations. */
+		if (cur->free + cur->bound + len >= pool->size) {
+			size_t skew;
+
+			if (pool->flags & POOL_CLEAR) {
+				memset(PTR_ADD(cur->start, cur->free), 0,
+				       pool->size - cur->free);
+			}
+			cur->free = pool->size;
+			cur->bound = 0;
+			if (pool->flags & POOL_QALIGN && pool->quantum > 1
+			    && (skew = (size_t)PTR_ADD(cur->start, cur->free) % pool->quantum)) {
+				cur->bound += skew;
+				cur->free -= skew;
+			}
+		} else if (addr == PTR_ADD(cur->start, cur->free)) {
+			if (pool->flags & POOL_CLEAR)
+				memset(addr, 0, len);
+			cur->free += len;
+		} else
+			cur->bound += len;
+	} else {
+		cur->bound += len;
+
+		if (cur->free + cur->bound >= pool->size) {
+			prev->next = cur->next;
+			free(cur->start);
+			if (!(pool->flags & POOL_APPEND))
+				free(cur);
+			pool->e_freed++;
+		} else if (prev != pool->extents) {
+			/* Move the extent to be the first non-live extent. */
+			prev->next = cur->next;
+			cur->next = pool->extents->next;
+			pool->extents->next = cur;
+		}
+	}
+}
+
+/* This allows you to declare that the given address marks the edge of some
+ * pool memory that is no longer needed.  Any extents that hold only data
+ * older than the boundary address are freed.  NOTE: You MUST NOT USE BOTH
+ * pool_free() and pool_free_old() on the same pool!! */
+void
+pool_free_old(alloc_pool_t p, void *addr)
+{
+	struct alloc_pool *pool = (struct alloc_pool *)p;
+	struct pool_extent *cur, *prev, *next;
+
+	if (!pool || !addr)
+		return;
+
+	for (prev = NULL, cur = pool->extents; cur; prev = cur, cur = cur->next) {
+		if (addr >= cur->start
+		    && addr < PTR_ADD(cur->start, pool->size))
+			break;
+	}
+	if (!cur)
+		return;
+
+	if (addr == PTR_ADD(cur->start, cur->free)) {
+		if (prev) {
+			prev->next = NULL;
+			next = cur;
+		} else {
+			size_t skew;
+
+			/* The most recent live extent can just be reset. */
+			if (pool->flags & POOL_CLEAR)
+				memset(addr, 0, pool->size - cur->free);
+			cur->free = pool->size;
+			cur->bound = 0;
+			if (pool->flags & POOL_QALIGN && pool->quantum > 1
+			    && (skew = (size_t)PTR_ADD(cur->start, cur->free) % pool->quantum)) {
+				cur->bound += skew;
+				cur->free -= skew;
+			}
+			next = cur->next;
+			cur->next = NULL;
+		}
+	} else {
+		next = cur->next;
+		cur->next = NULL;
+	}
+
+	while ((cur = next) != NULL) {
+		next = cur->next;
+		free(cur->start);
+		if (!(pool->flags & POOL_APPEND))
+			free(cur);
+		pool->e_freed++;
+	}
+}
+
+/* If the current extent doesn't have "len" free space in it, mark it as full
+ * so that the next alloc will start a new extent.  If len is (size_t)-1, this
+ * bump will always occur.  The function returns a boundary address that can
+ * be used with pool_free_old(), or a NULL if no memory is allocated. */
+void *
+pool_boundary(alloc_pool_t p, size_t len)
+{
+	struct alloc_pool *pool = (struct alloc_pool *)p;
+	struct pool_extent *cur;
+
+	if (!pool || !pool->extents)
+		return NULL;
+
+	cur = pool->extents;
+
+	if (cur->free < len) {
+		cur->bound += cur->free;
+		cur->free = 0;
+	}
+
+	return PTR_ADD(cur->start, cur->free);
+}
+
+#define FDPRINT(label, value) \
+	snprintf(buf, sizeof buf, label, value), \
+	write(fd, buf, strlen(buf))
+
+#define FDEXTSTAT(ext) \
+	snprintf(buf, sizeof buf, "  %12ld  %5ld\n", \
+		(long) ext->free, \
+		(long) ext->bound), \
+	write(fd, buf, strlen(buf))
+
+void
+pool_stats(alloc_pool_t p, int fd, int summarize)
+{
+	struct alloc_pool *pool = (struct alloc_pool *) p;
+	struct pool_extent	*cur;
+	char buf[BUFSIZ];
+
+	if (!pool)
+		return;
+
+	FDPRINT("  Extent size:       %12ld\n",	(long)	pool->size);
+	FDPRINT("  Alloc quantum:     %12ld\n",	(long)	pool->quantum);
+	FDPRINT("  Extents created:   %12ld\n",		pool->e_created);
+	FDPRINT("  Extents freed:     %12ld\n",		pool->e_freed);
+	FDPRINT("  Alloc count:       %12.0f\n", (double) pool->n_allocated);
+	FDPRINT("  Free Count:        %12.0f\n", (double) pool->n_freed);
+	FDPRINT("  Bytes allocated:   %12.0f\n", (double) pool->b_allocated);
+	FDPRINT("  Bytes freed:       %12.0f\n", (double) pool->b_freed);
+
+	if (summarize)
+		return;
+
+	if (!pool->extents)
+		return;
+
+	write(fd, "\n", 1);
+
+	for (cur = pool->extents; cur; cur = cur->next)
+		FDEXTSTAT(cur);
+}

lib/pool_alloc.h

@@ -0,0 +1,21 @@
+#include <stddef.h>
+
+#define POOL_CLEAR	(1<<0)		/* zero fill allocations	*/
+#define POOL_QALIGN	(1<<1)		/* align data to quanta		*/
+#define POOL_INTERN	(1<<2)		/* Allocate extent structures	*/
+#define POOL_APPEND	(1<<3)		/*   or appended to extent data	*/
+
+typedef void *alloc_pool_t;
+
+alloc_pool_t pool_create(size_t size, size_t quantum, void (*bomb)(const char *), int flags);
+void pool_destroy(alloc_pool_t pool);
+void *pool_alloc(alloc_pool_t pool, size_t size, const char *bomb_msg);
+void pool_free(alloc_pool_t pool, size_t size, void *addr);
+void pool_free_old(alloc_pool_t pool, void *addr);
+void *pool_boundary(alloc_pool_t pool, size_t size);
+
+#define pool_talloc(pool, type, count, bomb_msg) \
+	((type *)pool_alloc(pool, sizeof(type) * count, bomb_msg))
+
+#define pool_tfree(pool, type, count, addr) \
+	(pool_free(pool, sizeof(type) * count, addr))

lib/sysacls.h

@@ -0,0 +1,305 @@
+/*
+ * Unix SMB/Netbios implementation.
+ * Version 2.2.x
+ * Portable SMB ACL interface
+ * Copyright (C) Jeremy Allison 2000
+ * Copyright (C) 2007-2008 Wayne Davison
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * with this program; if not, visit the http://fsf.org website.
+ */
+
+#ifdef SUPPORT_ACLS
+
+#ifdef HAVE_SYS_ACL_H
+#include <sys/acl.h>
+#endif
+#ifdef HAVE_ACL_LIBACL_H
+#include <acl/libacl.h>
+#endif
+
+#define SMB_MALLOC(cnt) new_array(char, cnt)
+#define SMB_MALLOC_P(obj) new_array(obj, 1)
+#define SMB_MALLOC_ARRAY(obj, cnt) new_array(obj, cnt)
+#define SMB_REALLOC(mem, cnt) realloc_array(mem, char, cnt)
+#define slprintf snprintf
+
+#if defined HAVE_POSIX_ACLS /*-----------------------------------------------*/
+
+/* This is an identity mapping (just remove the SMB_). */
+
+#define SMB_ACL_TAG_T		acl_tag_t
+#define SMB_ACL_TYPE_T		acl_type_t
+
+/* Types of ACLs. */
+#define SMB_ACL_USER		ACL_USER
+#define SMB_ACL_USER_OBJ	ACL_USER_OBJ
+#define SMB_ACL_GROUP		ACL_GROUP
+#define SMB_ACL_GROUP_OBJ	ACL_GROUP_OBJ
+#define SMB_ACL_OTHER		ACL_OTHER
+#define SMB_ACL_MASK		ACL_MASK
+
+#define SMB_ACL_T		acl_t
+
+#define SMB_ACL_ENTRY_T		acl_entry_t
+
+#define SMB_ACL_FIRST_ENTRY	ACL_FIRST_ENTRY
+#define SMB_ACL_NEXT_ENTRY	ACL_NEXT_ENTRY
+
+#define SMB_ACL_TYPE_ACCESS	ACL_TYPE_ACCESS
+#define SMB_ACL_TYPE_DEFAULT	ACL_TYPE_DEFAULT
+
+#define SMB_ACL_VALID_NAME_BITS	(4 | 2 | 1)
+#define SMB_ACL_VALID_OBJ_BITS	(4 | 2 | 1)
+
+#define SMB_ACL_NEED_SORT
+
+#elif defined HAVE_TRU64_ACLS /*---------------------------------------------*/
+
+/* This is for DEC/Compaq Tru64 UNIX */
+
+#define SMB_ACL_TAG_T		acl_tag_t
+#define SMB_ACL_TYPE_T		acl_type_t
+
+/* Types of ACLs. */
+#define SMB_ACL_USER		ACL_USER
+#define SMB_ACL_USER_OBJ	ACL_USER_OBJ
+#define SMB_ACL_GROUP		ACL_GROUP
+#define SMB_ACL_GROUP_OBJ	ACL_GROUP_OBJ
+#define SMB_ACL_OTHER		ACL_OTHER
+#define SMB_ACL_MASK		ACL_MASK
+
+#define SMB_ACL_T		acl_t
+
+#define SMB_ACL_ENTRY_T		acl_entry_t
+
+#define SMB_ACL_FIRST_ENTRY	0
+#define SMB_ACL_NEXT_ENTRY	1
+
+#define SMB_ACL_TYPE_ACCESS	ACL_TYPE_ACCESS
+#define SMB_ACL_TYPE_DEFAULT	ACL_TYPE_DEFAULT
+
+#define SMB_ACL_VALID_NAME_BITS	(4 | 2 | 1)
+#define SMB_ACL_VALID_OBJ_BITS	(4 | 2 | 1)
+
+#define SMB_ACL_NEED_SORT
+
+#elif defined HAVE_UNIXWARE_ACLS || defined HAVE_SOLARIS_ACLS /*-------------*/
+
+/* Donated by Michael Davidson <md@sco.COM> for UnixWare / OpenUNIX.
+ * Modified by Toomas Soome <tsoome@ut.ee> for Solaris.  */
+
+/* SVR4.2 ES/MP ACLs */
+typedef int SMB_ACL_TAG_T;
+typedef int SMB_ACL_TYPE_T;
+
+/* Types of ACLs. */
+#define SMB_ACL_USER		USER
+#define SMB_ACL_USER_OBJ	USER_OBJ
+#define SMB_ACL_GROUP		GROUP
+#define SMB_ACL_GROUP_OBJ	GROUP_OBJ
+#define SMB_ACL_OTHER		OTHER_OBJ
+#define SMB_ACL_MASK		CLASS_OBJ
+
+typedef struct SMB_ACL_T {
+	int size;
+	int count;
+	int next;
+	struct acl acl[1];
+} *SMB_ACL_T;
+
+typedef struct acl *SMB_ACL_ENTRY_T;
+
+#define SMB_ACL_FIRST_ENTRY	0
+#define SMB_ACL_NEXT_ENTRY	1
+
+#define SMB_ACL_TYPE_ACCESS	0
+#define SMB_ACL_TYPE_DEFAULT	1
+
+#define SMB_ACL_VALID_NAME_BITS	(4 | 2 | 1)
+#define SMB_ACL_VALID_OBJ_BITS	(4 | 2 | 1)
+
+#define SMB_ACL_NEED_SORT
+
+#ifdef __CYGWIN__
+#define SMB_ACL_LOSES_SPECIAL_MODE_BITS
+#endif
+
+#elif defined HAVE_HPUX_ACLS /*----------------------------------------------*/
+
+/* Based on the Solaris & UnixWare code. */
+
+#undef GROUP
+#include <sys/aclv.h>
+
+/* SVR4.2 ES/MP ACLs */
+typedef int SMB_ACL_TAG_T;
+typedef int SMB_ACL_TYPE_T;
+
+/* Types of ACLs. */
+#define SMB_ACL_USER		USER
+#define SMB_ACL_USER_OBJ	USER_OBJ
+#define SMB_ACL_GROUP		GROUP
+#define SMB_ACL_GROUP_OBJ	GROUP_OBJ
+#define SMB_ACL_OTHER		OTHER_OBJ
+#define SMB_ACL_MASK		CLASS_OBJ
+
+typedef struct SMB_ACL_T {
+	int size;
+	int count;
+	int next;
+	struct acl acl[1];
+} *SMB_ACL_T;
+
+typedef struct acl *SMB_ACL_ENTRY_T;
+
+#define SMB_ACL_FIRST_ENTRY	0
+#define SMB_ACL_NEXT_ENTRY	1
+
+#define SMB_ACL_TYPE_ACCESS	0
+#define SMB_ACL_TYPE_DEFAULT	1
+
+#define SMB_ACL_VALID_NAME_BITS	(4 | 2 | 1)
+#define SMB_ACL_VALID_OBJ_BITS	(4 | 2 | 1)
+
+#define SMB_ACL_NEED_SORT
+
+#elif defined HAVE_IRIX_ACLS /*----------------------------------------------*/
+
+/* IRIX ACLs */
+
+#define SMB_ACL_TAG_T		acl_tag_t
+#define SMB_ACL_TYPE_T		acl_type_t
+
+/* Types of ACLs. */
+#define SMB_ACL_USER		ACL_USER
+#define SMB_ACL_USER_OBJ	ACL_USER_OBJ
+#define SMB_ACL_GROUP		ACL_GROUP
+#define SMB_ACL_GROUP_OBJ	ACL_GROUP_OBJ
+#define SMB_ACL_OTHER		ACL_OTHER_OBJ
+#define SMB_ACL_MASK		ACL_MASK
+
+typedef struct SMB_ACL_T {
+	int next;
+	BOOL freeaclp;
+	struct acl *aclp;
+} *SMB_ACL_T;
+
+#define SMB_ACL_ENTRY_T		acl_entry_t
+
+#define SMB_ACL_FIRST_ENTRY	0
+#define SMB_ACL_NEXT_ENTRY	1
+
+#define SMB_ACL_TYPE_ACCESS	ACL_TYPE_ACCESS
+#define SMB_ACL_TYPE_DEFAULT	ACL_TYPE_DEFAULT
+
+#define SMB_ACL_VALID_NAME_BITS	(4 | 2 | 1)
+#define SMB_ACL_VALID_OBJ_BITS	(4 | 2 | 1)
+
+#define SMB_ACL_NEED_SORT
+
+#elif defined HAVE_AIX_ACLS /*-----------------------------------------------*/
+
+/* Donated by Medha Date, mdate@austin.ibm.com, for IBM */
+
+#include "/usr/include/acl.h"
+
+struct acl_entry_link{
+	struct acl_entry_link *prevp;
+	struct new_acl_entry *entryp;
+	struct acl_entry_link *nextp;
+	int count;
+};
+
+struct new_acl_entry{
+	unsigned short ace_len;
+	unsigned short ace_type;
+	unsigned int ace_access;
+	struct ace_id ace_id[1];
+};
+
+#define SMB_ACL_ENTRY_T		struct new_acl_entry*
+#define SMB_ACL_T		struct acl_entry_link*
+ 
+#define SMB_ACL_TAG_T		unsigned short
+#define SMB_ACL_TYPE_T		int
+
+/* Types of ACLs. */
+#define SMB_ACL_USER		ACEID_USER
+#define SMB_ACL_USER_OBJ	3
+#define SMB_ACL_GROUP		ACEID_GROUP
+#define SMB_ACL_GROUP_OBJ	4
+#define SMB_ACL_OTHER		5
+#define SMB_ACL_MASK		6
+
+#define SMB_ACL_FIRST_ENTRY	1
+#define SMB_ACL_NEXT_ENTRY	2
+
+#define SMB_ACL_TYPE_ACCESS	0
+#define SMB_ACL_TYPE_DEFAULT	1
+
+#define SMB_ACL_VALID_NAME_BITS	(4 | 2 | 1)
+#define SMB_ACL_VALID_OBJ_BITS	(4 | 2 | 1)
+
+#define SMB_ACL_NEED_SORT
+
+#elif defined(HAVE_OSX_ACLS) /*----------------------------------------------*/
+
+/* Special handling for OS X ACLs */
+
+#define SMB_ACL_TAG_T		acl_tag_t
+#define SMB_ACL_TYPE_T		acl_type_t
+
+#define SMB_ACL_T		acl_t
+
+#define SMB_ACL_ENTRY_T		acl_entry_t
+
+#define SMB_ACL_USER		1
+#define SMB_ACL_GROUP		2
+
+#define SMB_ACL_FIRST_ENTRY	ACL_FIRST_ENTRY
+#define SMB_ACL_NEXT_ENTRY	ACL_NEXT_ENTRY
+
+#define SMB_ACL_TYPE_ACCESS	ACL_TYPE_EXTENDED
+#define SMB_ACL_TYPE_DEFAULT	ACL_TYPE_DEFAULT
+
+#define SMB_ACL_VALID_NAME_BITS	((1<<25)-1)
+#define SMB_ACL_VALID_OBJ_BITS	0
+
+/*#undef SMB_ACL_NEED_SORT*/
+
+#else /*---------------------------------------------------------------------*/
+
+/* Unknown platform. */
+
+#error Cannot handle ACLs on this platform!
+
+#endif
+
+int sys_acl_get_entry(SMB_ACL_T the_acl, int entry_id, SMB_ACL_ENTRY_T *entry_p);
+int sys_acl_get_tag_type(SMB_ACL_ENTRY_T entry_d, SMB_ACL_TAG_T *tag_type_p);
+int sys_acl_get_info(SMB_ACL_ENTRY_T entry, SMB_ACL_TAG_T *tag_type_p, uint32 *bits_p, id_t *u_g_id_p);
+SMB_ACL_T sys_acl_get_file(const char *path_p, SMB_ACL_TYPE_T type);
+SMB_ACL_T sys_acl_get_fd(int fd);
+SMB_ACL_T sys_acl_init(int count);
+int sys_acl_create_entry(SMB_ACL_T *pacl, SMB_ACL_ENTRY_T *pentry);
+int sys_acl_set_info(SMB_ACL_ENTRY_T entry, SMB_ACL_TAG_T tagtype, uint32 bits, id_t u_g_id);
+int sys_acl_set_access_bits(SMB_ACL_ENTRY_T entry, uint32 bits);
+int sys_acl_valid(SMB_ACL_T theacl);
+int sys_acl_set_file(const char *name, SMB_ACL_TYPE_T acltype, SMB_ACL_T theacl);
+int sys_acl_set_fd(int fd, SMB_ACL_T theacl);
+int sys_acl_delete_def_file(const char *name);
+int sys_acl_free_acl(SMB_ACL_T the_acl);
+int no_acl_syscall_error(int err);
+
+#endif /* SUPPORT_ACLS */

lib/sysxattrs.c

@@ -0,0 +1,135 @@
+/*
+ * Extended attribute support for rsync.
+ *
+ * Copyright (C) 2004 Red Hat, Inc.
+ * Copyright (C) 2003-2008 Wayne Davison
+ * Written by Jay Fenlason.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, visit the http://fsf.org website.
+ */
+
+#include "rsync.h"
+#include "sysxattrs.h"
+
+#ifdef SUPPORT_XATTRS
+
+#if defined HAVE_LINUX_XATTRS
+
+ssize_t sys_lgetxattr(const char *path, const char *name, void *value, size_t size)
+{
+	return lgetxattr(path, name, value, size);
+}
+
+ssize_t sys_fgetxattr(int filedes, const char *name, void *value, size_t size)
+{
+	return fgetxattr(filedes, name, value, size);
+}
+
+int sys_lsetxattr(const char *path, const char *name, const void *value, size_t size)
+{
+	return lsetxattr(path, name, value, size, 0);
+}
+
+int sys_lremovexattr(const char *path, const char *name)
+{
+	return lremovexattr(path, name);
+}
+
+ssize_t sys_llistxattr(const char *path, char *list, size_t size)
+{
+	return llistxattr(path, list, size);
+}
+
+#elif HAVE_OSX_XATTRS
+
+ssize_t sys_lgetxattr(const char *path, const char *name, void *value, size_t size)
+{
+	return getxattr(path, name, value, size, 0, XATTR_NOFOLLOW);
+}
+
+ssize_t sys_fgetxattr(int filedes, const char *name, void *value, size_t size)
+{
+	return fgetxattr(filedes, name, value, size, 0, 0);
+}
+
+int sys_lsetxattr(const char *path, const char *name, const void *value, size_t size)
+{
+	return setxattr(path, name, value, size, 0, XATTR_NOFOLLOW);
+}
+
+int sys_lremovexattr(const char *path, const char *name)
+{
+	return removexattr(path, name, XATTR_NOFOLLOW);
+}
+
+ssize_t sys_llistxattr(const char *path, char *list, size_t size)
+{
+	return listxattr(path, list, size, XATTR_NOFOLLOW);
+}
+
+#elif HAVE_FREEBSD_XATTRS
+
+ssize_t sys_lgetxattr(const char *path, const char *name, void *value, size_t size)
+{
+	return extattr_get_link(path, EXTATTR_NAMESPACE_USER, name, value, size);
+}
+
+ssize_t sys_fgetxattr(int filedes, const char *name, void *value, size_t size)
+{
+	return extattr_get_fd(filedes, EXTATTR_NAMESPACE_USER, name, value, size);
+}
+
+int sys_lsetxattr(const char *path, const char *name, const void *value, size_t size)
+{
+	return extattr_set_link(path, EXTATTR_NAMESPACE_USER, name, value, size);
+}
+
+int sys_lremovexattr(const char *path, const char *name)
+{
+	return extattr_delete_link(path, EXTATTR_NAMESPACE_USER, name);
+}
+
+ssize_t sys_llistxattr(const char *path, char *list, size_t size)
+{
+	unsigned char keylen;
+	ssize_t off, len = extattr_list_link(path, EXTATTR_NAMESPACE_USER, list, size);
+
+	if (len <= 0 || (size_t)len > size)
+		return len;
+
+	/* FreeBSD puts a single-byte length before each string, with no '\0'
+	 * terminator.  We need to change this into a series of null-terminted
+	 * strings.  Since the size is the same, we can simply transform the
+	 * output in place. */
+	for (off = 0; off < len; off += keylen + 1) {
+		keylen = ((unsigned char*)list)[off];
+		if (off + keylen >= len) {
+			/* Should be impossible, but kernel bugs happen! */
+			errno = EINVAL;
+			return -1;
+		}
+		memmove(list+off, list+off+1, keylen);
+		list[off+keylen] = '\0';
+	}
+
+	return len;
+}
+
+#else
+
+#error You need to create xattr compatibility functions.
+
+#endif
+
+#endif /* SUPPORT_XATTRS */

lib/sysxattrs.h

@@ -0,0 +1,26 @@
+#ifdef SUPPORT_XATTRS
+
+#if defined HAVE_ATTR_XATTR_H
+#include <attr/xattr.h>
+#elif defined HAVE_SYS_XATTR_H
+#include <sys/xattr.h>
+#elif defined HAVE_SYS_EXTATTR_H
+#include <sys/extattr.h>
+#endif
+
+/* Linux 2.4 does not define this as a distinct errno value: */
+#ifndef ENOATTR
+#define ENOATTR ENODATA
+#endif
+
+ssize_t sys_lgetxattr(const char *path, const char *name, void *value, size_t size);
+ssize_t sys_fgetxattr(int filedes, const char *name, void *value, size_t size);
+int sys_lsetxattr(const char *path, const char *name, const void *value, size_t size);
+int sys_lremovexattr(const char *path, const char *name);
+ssize_t sys_llistxattr(const char *path, char *list, size_t size);
+
+#else
+
+/* No xattrs available */
+
+#endif

lib/wildmatch.c

@@ -0,0 +1,368 @@
+/*
+**  Do shell-style pattern matching for ?, \, [], and * characters.
+**  It is 8bit clean.
+**
+**  Written by Rich $alz, mirror!rs, Wed Nov 26 19:03:17 EST 1986.
+**  Rich $alz is now <rsalz@bbn.com>.
+**
+**  Modified by Wayne Davison to special-case '/' matching, to make '**'
+**  work differently than '*', and to fix the character-class code.
+*/
+
+#include "rsync.h"
+
+/* What character marks an inverted character class? */
+#define NEGATE_CLASS	'!'
+#define NEGATE_CLASS2	'^'
+
+#define FALSE 0
+#define TRUE 1
+#define ABORT_ALL -1
+#define ABORT_TO_STARSTAR -2
+
+#define CC_EQ(class, len, litmatch) ((len) == sizeof (litmatch)-1 \
+				    && *(class) == *(litmatch) \
+				    && strncmp((char*)class, litmatch, len) == 0)
+
+#if defined STDC_HEADERS || !defined isascii
+# define ISASCII(c) 1
+#else
+# define ISASCII(c) isascii(c)
+#endif
+
+#ifdef isblank
+# define ISBLANK(c) (ISASCII(c) && isblank(c))
+#else
+# define ISBLANK(c) ((c) == ' ' || (c) == '\t')
+#endif
+
+#ifdef isgraph
+# define ISGRAPH(c) (ISASCII(c) && isgraph(c))
+#else
+# define ISGRAPH(c) (ISASCII(c) && isprint(c) && !isspace(c))
+#endif
+
+#define ISPRINT(c) (ISASCII(c) && isprint(c))
+#define ISDIGIT(c) (ISASCII(c) && isdigit(c))
+#define ISALNUM(c) (ISASCII(c) && isalnum(c))
+#define ISALPHA(c) (ISASCII(c) && isalpha(c))
+#define ISCNTRL(c) (ISASCII(c) && iscntrl(c))
+#define ISLOWER(c) (ISASCII(c) && islower(c))
+#define ISPUNCT(c) (ISASCII(c) && ispunct(c))
+#define ISSPACE(c) (ISASCII(c) && isspace(c))
+#define ISUPPER(c) (ISASCII(c) && isupper(c))
+#define ISXDIGIT(c) (ISASCII(c) && isxdigit(c))
+
+#ifdef WILD_TEST_ITERATIONS
+int wildmatch_iteration_count;
+#endif
+
+static int force_lower_case = 0;
+
+/* Match pattern "p" against the a virtually-joined string consisting
+ * of "text" and any strings in array "a". */
+static int dowild(const uchar *p, const uchar *text, const uchar*const *a)
+{
+    uchar p_ch;
+
+#ifdef WILD_TEST_ITERATIONS
+    wildmatch_iteration_count++;
+#endif
+
+    for ( ; (p_ch = *p) != '\0'; text++, p++) {
+	int matched, special;
+	uchar t_ch, prev_ch;
+	while ((t_ch = *text) == '\0') {
+	    if (*a == NULL) {
+		if (p_ch != '*')
+		    return ABORT_ALL;
+		break;
+	    }
+	    text = *a++;
+	}
+	if (force_lower_case && ISUPPER(t_ch))
+	    t_ch = tolower(t_ch);
+	switch (p_ch) {
+	  case '\\':
+	    /* Literal match with following character.  Note that the test
+	     * in "default" handles the p[1] == '\0' failure case. */
+	    p_ch = *++p;
+	    /* FALLTHROUGH */
+	  default:
+	    if (t_ch != p_ch)
+		return FALSE;
+	    continue;
+	  case '?':
+	    /* Match anything but '/'. */
+	    if (t_ch == '/')
+		return FALSE;
+	    continue;
+	  case '*':
+	    if (*++p == '*') {
+		while (*++p == '*') {}
+		special = TRUE;
+	    } else
+		special = FALSE;
+	    if (*p == '\0') {
+		/* Trailing "**" matches everything.  Trailing "*" matches
+		 * only if there are no more slash characters. */
+		if (!special) {
+		    do {
+			if (strchr((char*)text, '/') != NULL)
+			    return FALSE;
+		    } while ((text = *a++) != NULL);
+		}
+		return TRUE;
+	    }
+	    while (1) {
+		if (t_ch == '\0') {
+		    if ((text = *a++) == NULL)
+			break;
+		    t_ch = *text;
+		    continue;
+		}
+		if ((matched = dowild(p, text, a)) != FALSE) {
+		    if (!special || matched != ABORT_TO_STARSTAR)
+			return matched;
+		} else if (!special && t_ch == '/')
+		    return ABORT_TO_STARSTAR;
+		t_ch = *++text;
+	    }
+	    return ABORT_ALL;
+	  case '[':
+	    p_ch = *++p;
+#ifdef NEGATE_CLASS2
+	    if (p_ch == NEGATE_CLASS2)
+		p_ch = NEGATE_CLASS;
+#endif
+	    /* Assign literal TRUE/FALSE because of "matched" comparison. */
+	    special = p_ch == NEGATE_CLASS? TRUE : FALSE;
+	    if (special) {
+		/* Inverted character class. */
+		p_ch = *++p;
+	    }
+	    prev_ch = 0;
+	    matched = FALSE;
+	    do {
+		if (!p_ch)
+		    return ABORT_ALL;
+		if (p_ch == '\\') {
+		    p_ch = *++p;
+		    if (!p_ch)
+			return ABORT_ALL;
+		    if (t_ch == p_ch)
+			matched = TRUE;
+		} else if (p_ch == '-' && prev_ch && p[1] && p[1] != ']') {
+		    p_ch = *++p;
+		    if (p_ch == '\\') {
+			p_ch = *++p;
+			if (!p_ch)
+			    return ABORT_ALL;
+		    }
+		    if (t_ch <= p_ch && t_ch >= prev_ch)
+			matched = TRUE;
+		    p_ch = 0; /* This makes "prev_ch" get set to 0. */
+		} else if (p_ch == '[' && p[1] == ':') {
+		    const uchar *s;
+		    int i;
+		    for (s = p += 2; (p_ch = *p) && p_ch != ']'; p++) {} /*SHARED ITERATOR*/
+		    if (!p_ch)
+			return ABORT_ALL;
+		    i = p - s - 1;
+		    if (i < 0 || p[-1] != ':') {
+			/* Didn't find ":]", so treat like a normal set. */
+			p = s - 2;
+			p_ch = '[';
+			if (t_ch == p_ch)
+			    matched = TRUE;
+			continue;
+		    }
+		    if (CC_EQ(s,i, "alnum")) {
+			if (ISALNUM(t_ch))
+			    matched = TRUE;
+		    } else if (CC_EQ(s,i, "alpha")) {
+			if (ISALPHA(t_ch))
+			    matched = TRUE;
+		    } else if (CC_EQ(s,i, "blank")) {
+			if (ISBLANK(t_ch))
+			    matched = TRUE;
+		    } else if (CC_EQ(s,i, "cntrl")) {
+			if (ISCNTRL(t_ch))
+			    matched = TRUE;
+		    } else if (CC_EQ(s,i, "digit")) {
+			if (ISDIGIT(t_ch))
+			    matched = TRUE;
+		    } else if (CC_EQ(s,i, "graph")) {
+			if (ISGRAPH(t_ch))
+			    matched = TRUE;
+		    } else if (CC_EQ(s,i, "lower")) {
+			if (ISLOWER(t_ch))
+			    matched = TRUE;
+		    } else if (CC_EQ(s,i, "print")) {
+			if (ISPRINT(t_ch))
+			    matched = TRUE;
+		    } else if (CC_EQ(s,i, "punct")) {
+			if (ISPUNCT(t_ch))
+			    matched = TRUE;
+		    } else if (CC_EQ(s,i, "space")) {
+			if (ISSPACE(t_ch))
+			    matched = TRUE;
+		    } else if (CC_EQ(s,i, "upper")) {
+			if (ISUPPER(t_ch))
+			    matched = TRUE;
+		    } else if (CC_EQ(s,i, "xdigit")) {
+			if (ISXDIGIT(t_ch))
+			    matched = TRUE;
+		    } else /* malformed [:class:] string */
+			return ABORT_ALL;
+		    p_ch = 0; /* This makes "prev_ch" get set to 0. */
+		} else if (t_ch == p_ch)
+		    matched = TRUE;
+	    } while (prev_ch = p_ch, (p_ch = *++p) != ']');
+	    if (matched == special || t_ch == '/')
+		return FALSE;
+	    continue;
+	}
+    }
+
+    do {
+	if (*text)
+	    return FALSE;
+    } while ((text = *a++) != NULL);
+
+    return TRUE;
+}
+
+/* Match literal string "s" against the a virtually-joined string consisting
+ * of "text" and any strings in array "a". */
+static int doliteral(const uchar *s, const uchar *text, const uchar*const *a)
+{
+    for ( ; *s != '\0'; text++, s++) {
+	while (*text == '\0') {
+	    if ((text = *a++) == NULL)
+		return FALSE;
+	}
+	if (*text != *s)
+	    return FALSE;
+    }
+
+    do {
+	if (*text)
+	    return FALSE;
+    } while ((text = *a++) != NULL);
+
+    return TRUE;
+}
+
+/* Return the last "count" path elements from the concatenated string.
+ * We return a string pointer to the start of the string, and update the
+ * array pointer-pointer to point to any remaining string elements. */
+static const uchar *trailing_N_elements(const uchar*const **a_ptr, int count)
+{
+    const uchar*const *a = *a_ptr;
+    const uchar*const *first_a = a;
+
+    while (*a)
+	    a++;
+
+    while (a != first_a) {
+	const uchar *s = *--a;
+	s += strlen((char*)s);
+	while (--s >= *a) {
+	    if (*s == '/' && !--count) {
+		*a_ptr = a+1;
+		return s+1;
+	    }
+	}
+    }
+
+    if (count == 1) {
+	*a_ptr = a+1;
+	return *a;
+    }
+
+    return NULL;
+}
+
+/* Match the "pattern" against the "text" string. */
+int wildmatch(const char *pattern, const char *text)
+{
+    static const uchar *nomore[1]; /* A NULL pointer. */
+#ifdef WILD_TEST_ITERATIONS
+    wildmatch_iteration_count = 0;
+#endif
+    return dowild((const uchar*)pattern, (const uchar*)text, nomore) == TRUE;
+}
+
+/* Match the "pattern" against the forced-to-lower-case "text" string. */
+int iwildmatch(const char *pattern, const char *text)
+{
+    static const uchar *nomore[1]; /* A NULL pointer. */
+    int ret;
+#ifdef WILD_TEST_ITERATIONS
+    wildmatch_iteration_count = 0;
+#endif
+    force_lower_case = 1;
+    ret = dowild((const uchar*)pattern, (const uchar*)text, nomore) == TRUE;
+    force_lower_case = 0;
+    return ret;
+}
+
+/* Match pattern "p" against the a virtually-joined string consisting
+ * of all the pointers in array "texts" (which has a NULL pointer at the
+ * end).  The int "where" can be 0 (normal matching), > 0 (match only
+ * the trailing N slash-separated filename components of "texts"), or < 0
+ * (match the "pattern" at the start or after any slash in "texts"). */
+int wildmatch_array(const char *pattern, const char*const *texts, int where)
+{
+    const uchar *p = (const uchar*)pattern;
+    const uchar*const *a = (const uchar*const*)texts;
+    const uchar *text;
+    int matched;
+
+#ifdef WILD_TEST_ITERATIONS
+    wildmatch_iteration_count = 0;
+#endif
+
+    if (where > 0)
+	text = trailing_N_elements(&a, where);
+    else
+	text = *a++;
+    if (!text)
+	return FALSE;
+
+    if ((matched = dowild(p, text, a)) != TRUE && where < 0
+     && matched != ABORT_ALL) {
+	while (1) {
+	    if (*text == '\0') {
+		if ((text = (uchar*)*a++) == NULL)
+		    return FALSE;
+		continue;
+	    }
+	    if (*text++ == '/' && (matched = dowild(p, text, a)) != FALSE
+	     && matched != ABORT_TO_STARSTAR)
+		break;
+	}
+    }
+    return matched == TRUE;
+}
+
+/* Match literal string "s" against the a virtually-joined string consisting
+ * of all the pointers in array "texts" (which has a NULL pointer at the
+ * end).  The int "where" can be 0 (normal matching), or > 0 (match
+ * only the trailing N slash-separated filename components of "texts"). */
+int litmatch_array(const char *string, const char*const *texts, int where)
+{
+    const uchar *s = (const uchar*)string;
+    const uchar*const *a = (const uchar* const*)texts;
+    const uchar *text;
+
+    if (where > 0)
+	text = trailing_N_elements(&a, where);
+    else
+	text = *a++;
+    if (!text)
+	return FALSE;
+
+    return doliteral(s, text, a) == TRUE;
+}

lib/wildmatch.h

@@ -0,0 +1,6 @@
+/* wildmatch.h */
+
+int wildmatch(const char *pattern, const char *text);
+int iwildmatch(const char *pattern, const char *text);
+int wildmatch_array(const char *pattern, const char*const *texts, int where);
+int litmatch_array(const char *string, const char*const *texts, int where);

loadparm.c

@@ -1,21 +1,25 @@
 /* This is based on loadparm.c from Samba, written by Andrew Tridgell
    and Karl Auer */
 
-/* 
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2 of the License, or
-   (at your option) any later version.
-   
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-   
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, visit the http://fsf.org website.
+ */
+
+/* some fixes
+ *
+ * Copyright (C) 2001, 2002 Martin Pool <mbp@samba.org>
+ */
 
 /*
  *  Load parameters.
@@ -31,7 +35,7 @@
  * 3) add it to the list of available functions (eg: using FN_GLOBAL_STRING())
  * 4) If it's a global then initialise it in init_globals. If a local
  *    (ie. service) parameter then initialise it in the sDefault structure
- *  
+ *
  *
  * Notes:
  *   The configuration file is processed sequentially for speed. It is NOT
@@ -43,18 +47,28 @@
  *
  */
 
+/* TODO: Parameter to set debug level on server. */
+
 #include "rsync.h"
+#include "ifuncs.h"
 #define PTR_DIFF(p1,p2) ((ptrdiff_t)(((char *)(p1)) - (char *)(p2)))
 #define strequal(a,b) (strcasecmp(a,b)==0)
 #define BOOLSTR(b) ((b) ? "Yes" : "No")
 typedef char pstring[1024];
 #define pstrcpy(a,b) strlcpy(a,b,sizeof(pstring))
 
+#ifndef LOG_DAEMON
+#define LOG_DAEMON 0
+#endif
+
+#define DEFAULT_DONT_COMPRESS "*.gz *.zip *.z *.rpm *.deb *.iso *.bz2" \
+	" *.t[gb]z *.7z *.mp[34] *.mov *.avi *.ogg *.jpg *.jpeg"
+
 /* the following are used by loadparm for option lists */
 typedef enum
 {
 	P_BOOL,P_BOOLREV,P_CHAR,P_INTEGER,P_OCTAL,
-	P_STRING,P_GSTRING,P_ENUM,P_SEP
+	P_PATH,P_STRING,P_GSTRING,P_ENUM,P_SEP
 } parm_type;
 
 typedef enum
@@ -77,8 +91,6 @@ struct parm_struct
 	unsigned flags;
 };
 
-static BOOL bLoaded = False;
-
 #ifndef GLOBAL_NAME
 #define GLOBAL_NAME "global"
 #endif
@@ -88,81 +100,122 @@ static BOOL bLoaded = False;
 #define iSERVICE(i) (*pSERVICE(i))
 #define LP_SNUM_OK(iService) (((iService) >= 0) && ((iService) < iNumServices))
 
-/* 
+/*
  * This structure describes global (ie., server-wide) parameters.
  */
 typedef struct
 {
+	char *bind_address;
 	char *motd_file;
-	char *log_file;
 	char *pid_file;
-	int syslog_facility;
 	char *socket_options;
+
+	int rsync_port;
 } global;
 
 static global Globals;
 
 
-
-/* 
- * This structure describes a single service. 
+/*
+ * This structure describes a single service.  Their order must match the
+ * initializers below, which you can accomplish by keeping each sub-section
+ * sorted.  (e.g. in vim, just visually select each subsection and use !sort.)
  */
 typedef struct
 {
-	char *name;
-	char *path;
+	char *auth_users;
+	char *charset;
 	char *comment;
-	char *lock_file;
-	BOOL read_only;
-	BOOL list;
-	BOOL use_chroot;
-	BOOL transfer_logging;
-	char *uid;
+	char *dont_compress;
+	char *exclude;
+	char *exclude_from;
+	char *filter;
 	char *gid;
 	char *hosts_allow;
 	char *hosts_deny;
-	char *auth_users;
-	char *secrets_file;
-	BOOL strict_modes;
-	char *exclude;
-	char *exclude_from;
 	char *include;
 	char *include_from;
+	char *incoming_chmod;
+	char *lock_file;
+	char *log_file;
 	char *log_format;
+	char *name;
+	char *outgoing_chmod;
+	char *path;
+	char *postxfer_exec;
+	char *prexfer_exec;
 	char *refuse_options;
-	char *dont_compress;
-	int timeout;
+	char *secrets_file;
+	char *temp_dir;
+	char *uid;
+
 	int max_connections;
+	int max_verbosity;
+	int syslog_facility;
+	int timeout;
+
+	BOOL fake_super;
+	BOOL ignore_errors;
+	BOOL ignore_nonreadable;
+	BOOL list;
+	BOOL munge_symlinks;
+	BOOL numeric_ids;
+	BOOL read_only;
+	BOOL strict_modes;
+	BOOL transfer_logging;
+	BOOL use_chroot;
+	BOOL write_only;
 } service;
 
 
-/* This is a default service used to prime a services structure */
-static service sDefault = 
+/* This is a default service used to prime a services structure.  In order
+ * to make these easy to keep sorted in the same way as the variables
+ * above, use the variable name in the leading comment, including a
+ * trailing ';' (to avoid a sorting problem with trailing digits). */
+static service sDefault =
 {
-	NULL,    /* name */
-	NULL,    /* path */
-	NULL,    /* comment */
-	DEFAULT_LOCK_FILE,    /* lock file */
-	True,    /* read only */
-	True,    /* list */
-	True,    /* use chroot */
-	False,   /* transfer logging */
-	"nobody",/* uid */
-	"nobody",/* gid */
-	NULL,    /* hosts allow */
-	NULL,    /* hosts deny */
-	NULL,    /* auth users */
-	NULL,    /* secrets file */
-	True,   /* strict modes */
-	NULL,    /* exclude */
-	NULL,    /* exclude from */
-	NULL,    /* include */
-	NULL,    /* include from */
-	"%o %h [%a] %m (%u) %f %l",    /* log format */
-	NULL,    /* refuse options */
-	"*.gz *.tgz *.zip *.z *.rpm *.deb",    /* dont compress */
-	0,        /* timeout */
-	0        /* max connections */
+ /* auth_users; */		NULL,
+ /* charset; */ 		NULL,
+ /* comment; */ 		NULL,
+ /* dont_compress; */		DEFAULT_DONT_COMPRESS,
+ /* exclude; */			NULL,
+ /* exclude_from; */		NULL,
+ /* filter; */			NULL,
+ /* gid; */			NOBODY_GROUP,
+ /* hosts_allow; */		NULL,
+ /* hosts_deny; */		NULL,
+ /* include; */			NULL,
+ /* include_from; */		NULL,
+ /* incoming_chmod; */		NULL,
+ /* lock_file; */		DEFAULT_LOCK_FILE,
+ /* log_file; */		NULL,
+ /* log_format; */		"%o %h [%a] %m (%u) %f %l",
+ /* name; */			NULL,
+ /* outgoing_chmod; */		NULL,
+ /* path; */			NULL,
+ /* postxfer_exec; */		NULL,
+ /* prexfer_exec; */		NULL,
+ /* refuse_options; */		NULL,
+ /* secrets_file; */		NULL,
+ /* temp_dir; */ 		NULL,
+ /* uid; */			NOBODY_USER,
+
+ /* max_connections; */		0,
+ /* max_verbosity; */		1,
+ /* syslog_facility; */		LOG_DAEMON,
+ /* timeout; */			0,
+
+ /* fake_super; */		False,
+ /* ignore_errors; */		False,
+ /* ignore_nonreadable; */	False,
+ /* list; */			True,
+ /* munge_symlinks; */		(BOOL)-1,
+ /* numeric_ids; */		(BOOL)-1,
+ /* read_only; */		True,
+ /* strict_modes; */		True,
+ /* transfer_logging; */	False,
+ /* use_chroot; */		True,
+ /* write_only; */		False,
 };
 
 
@@ -204,7 +257,7 @@ static struct enum_list enum_facilities[] = {
 	{ LOG_NEWS, "news" },
 #endif
 #ifdef LOG_AUTH
-	{ LOG_AUTH, "security" },		
+	{ LOG_AUTH, "security" },
 #endif
 #ifdef LOG_SYSLOG
 	{ LOG_SYSLOG, "syslog" },
@@ -245,53 +298,68 @@ static struct enum_list enum_facilities[] = {
 /* note that we do not initialise the defaults union - it is not allowed in ANSI C */
 static struct parm_struct parm_table[] =
 {
-  {"motd file",        P_STRING,  P_GLOBAL, &Globals.motd_file,    NULL,   0},
-  {"syslog facility",  P_ENUM,    P_GLOBAL, &Globals.syslog_facility, enum_facilities,0},
-  {"socket options",   P_STRING,  P_GLOBAL, &Globals.socket_options,NULL,  0},
-  {"log file",         P_STRING,  P_GLOBAL, &Globals.log_file,      NULL,  0},
-  {"pid file",         P_STRING,  P_GLOBAL, &Globals.pid_file,      NULL,  0},
+ {"address",           P_STRING, P_GLOBAL,&Globals.bind_address,       NULL,0},
+ {"motd file",         P_STRING, P_GLOBAL,&Globals.motd_file,          NULL,0},
+ {"pid file",          P_STRING, P_GLOBAL,&Globals.pid_file,           NULL,0},
+ {"port",              P_INTEGER,P_GLOBAL,&Globals.rsync_port,         NULL,0},
+ {"socket options",    P_STRING, P_GLOBAL,&Globals.socket_options,     NULL,0},
 
-  {"timeout",          P_INTEGER, P_LOCAL,  &sDefault.timeout,     NULL,  0},
-  {"max connections",  P_INTEGER, P_LOCAL,  &sDefault.max_connections,NULL, 0},
-  {"name",             P_STRING,  P_LOCAL,  &sDefault.name,        NULL,   0},
-  {"comment",          P_STRING,  P_LOCAL,  &sDefault.comment,     NULL,   0},
-  {"lock file",        P_STRING,  P_LOCAL,  &sDefault.lock_file,   NULL,   0},
-  {"path",             P_STRING,  P_LOCAL,  &sDefault.path,        NULL,   0},
-  {"read only",        P_BOOL,    P_LOCAL,  &sDefault.read_only,   NULL,   0},
-  {"list",             P_BOOL,    P_LOCAL,  &sDefault.list,        NULL,   0},
-  {"use chroot",       P_BOOL,    P_LOCAL,  &sDefault.use_chroot,  NULL,   0},
-  {"uid",              P_STRING,  P_LOCAL,  &sDefault.uid,         NULL,   0},
-  {"gid",              P_STRING,  P_LOCAL,  &sDefault.gid,         NULL,   0},
-  {"hosts allow",      P_STRING,  P_LOCAL,  &sDefault.hosts_allow, NULL,   0},
-  {"hosts deny",       P_STRING,  P_LOCAL,  &sDefault.hosts_deny,  NULL,   0},
-  {"auth users",       P_STRING,  P_LOCAL,  &sDefault.auth_users,  NULL,   0},
-  {"secrets file",     P_STRING,  P_LOCAL,  &sDefault.secrets_file,NULL,   0},
-  {"strict modes",     P_BOOL,    P_LOCAL,  &sDefault.strict_modes,NULL,   0},
-  {"exclude",          P_STRING,  P_LOCAL,  &sDefault.exclude,     NULL,   0},
-  {"exclude from",     P_STRING,  P_LOCAL,  &sDefault.exclude_from,NULL,   0},
-  {"include",          P_STRING,  P_LOCAL,  &sDefault.include,     NULL,   0},
-  {"include from",     P_STRING,  P_LOCAL,  &sDefault.include_from,NULL,   0},
-  {"transfer logging", P_BOOL,    P_LOCAL,  &sDefault.transfer_logging,NULL,0},
-  {"log format",       P_STRING,  P_LOCAL,  &sDefault.log_format,  NULL,   0},
-  {"refuse options",   P_STRING,  P_LOCAL,  &sDefault.refuse_options,NULL, 0},
-  {"dont compress",    P_STRING,  P_LOCAL,  &sDefault.dont_compress,NULL,  0},
-  {NULL,               P_BOOL,    P_NONE,   NULL,                  NULL,   0}
+ {"auth users",        P_STRING, P_LOCAL, &sDefault.auth_users,        NULL,0},
+ {"charset",           P_STRING, P_LOCAL, &sDefault.charset,           NULL,0},
+ {"comment",           P_STRING, P_LOCAL, &sDefault.comment,           NULL,0},
+ {"dont compress",     P_STRING, P_LOCAL, &sDefault.dont_compress,     NULL,0},
+ {"exclude from",      P_STRING, P_LOCAL, &sDefault.exclude_from,      NULL,0},
+ {"exclude",           P_STRING, P_LOCAL, &sDefault.exclude,           NULL,0},
+ {"fake super",        P_BOOL,   P_LOCAL, &sDefault.fake_super,        NULL,0},
+ {"filter",            P_STRING, P_LOCAL, &sDefault.filter,            NULL,0},
+ {"gid",               P_STRING, P_LOCAL, &sDefault.gid,               NULL,0},
+ {"hosts allow",       P_STRING, P_LOCAL, &sDefault.hosts_allow,       NULL,0},
+ {"hosts deny",        P_STRING, P_LOCAL, &sDefault.hosts_deny,        NULL,0},
+ {"ignore errors",     P_BOOL,   P_LOCAL, &sDefault.ignore_errors,     NULL,0},
+ {"ignore nonreadable",P_BOOL,   P_LOCAL, &sDefault.ignore_nonreadable,NULL,0},
+ {"include from",      P_STRING, P_LOCAL, &sDefault.include_from,      NULL,0},
+ {"include",           P_STRING, P_LOCAL, &sDefault.include,           NULL,0},
+ {"incoming chmod",    P_STRING, P_LOCAL, &sDefault.incoming_chmod,    NULL,0},
+ {"list",              P_BOOL,   P_LOCAL, &sDefault.list,              NULL,0},
+ {"lock file",         P_STRING, P_LOCAL, &sDefault.lock_file,         NULL,0},
+ {"log file",          P_STRING, P_LOCAL, &sDefault.log_file,          NULL,0},
+ {"log format",        P_STRING, P_LOCAL, &sDefault.log_format,        NULL,0},
+ {"max connections",   P_INTEGER,P_LOCAL, &sDefault.max_connections,   NULL,0},
+ {"max verbosity",     P_INTEGER,P_LOCAL, &sDefault.max_verbosity,     NULL,0},
+ {"munge symlinks",    P_BOOL,   P_LOCAL, &sDefault.munge_symlinks,    NULL,0},
+ {"name",              P_STRING, P_LOCAL, &sDefault.name,              NULL,0},
+ {"numeric ids",       P_BOOL,   P_LOCAL, &sDefault.numeric_ids,       NULL,0},
+ {"outgoing chmod",    P_STRING, P_LOCAL, &sDefault.outgoing_chmod,    NULL,0},
+ {"path",              P_PATH,   P_LOCAL, &sDefault.path,              NULL,0},
+#ifdef HAVE_PUTENV
+ {"post-xfer exec",    P_STRING, P_LOCAL, &sDefault.postxfer_exec,     NULL,0},
+ {"pre-xfer exec",     P_STRING, P_LOCAL, &sDefault.prexfer_exec,      NULL,0},
+#endif
+ {"read only",         P_BOOL,   P_LOCAL, &sDefault.read_only,         NULL,0},
+ {"refuse options",    P_STRING, P_LOCAL, &sDefault.refuse_options,    NULL,0},
+ {"secrets file",      P_STRING, P_LOCAL, &sDefault.secrets_file,      NULL,0},
+ {"strict modes",      P_BOOL,   P_LOCAL, &sDefault.strict_modes,      NULL,0},
+ {"syslog facility",   P_ENUM,   P_LOCAL, &sDefault.syslog_facility,enum_facilities,0},
+ {"temp dir",          P_PATH,   P_LOCAL, &sDefault.temp_dir,          NULL,0},
+ {"timeout",           P_INTEGER,P_LOCAL, &sDefault.timeout,           NULL,0},
+ {"transfer logging",  P_BOOL,   P_LOCAL, &sDefault.transfer_logging,  NULL,0},
+ {"uid",               P_STRING, P_LOCAL, &sDefault.uid,               NULL,0},
+ {"use chroot",        P_BOOL,   P_LOCAL, &sDefault.use_chroot,        NULL,0},
+ {"write only",        P_BOOL,   P_LOCAL, &sDefault.write_only,        NULL,0},
+ {NULL,                P_BOOL,   P_NONE,  NULL,                        NULL,0}
 };
 
 
 /***************************************************************************
-Initialise the global parameter structure.
+* Initialise the global parameter structure.
 ***************************************************************************/
 static void init_globals(void)
 {
-	memset(&Globals, 0, sizeof(Globals));
-#ifdef LOG_DAEMON
-	Globals.syslog_facility = LOG_DAEMON;
-#endif
+	memset(&Globals, 0, sizeof Globals);
 }
 
 /***************************************************************************
-Initialise the sDefault parameter structure.
+* Initialise the sDefault parameter structure.
 ***************************************************************************/
 static void init_locals(void)
 {
@@ -299,8 +367,8 @@ static void init_locals(void)
 
 
 /*
-   In this section all the functions that are used to access the 
-   parameters from the rest of the program are defined 
+   In this section all the functions that are used to access the
+   parameters from the rest of the program are defined
 */
 
 #define FN_GLOBAL_STRING(fn_name,ptr) \
@@ -322,50 +390,68 @@ static void init_locals(void)
  int fn_name(int i) {return(LP_SNUM_OK(i)? pSERVICE(i)->val : sDefault.val);}
 
 
+FN_GLOBAL_STRING(lp_bind_address, &Globals.bind_address)
 FN_GLOBAL_STRING(lp_motd_file, &Globals.motd_file)
-FN_GLOBAL_STRING(lp_log_file, &Globals.log_file)
 FN_GLOBAL_STRING(lp_pid_file, &Globals.pid_file)
 FN_GLOBAL_STRING(lp_socket_options, &Globals.socket_options)
-FN_GLOBAL_INTEGER(lp_syslog_facility, &Globals.syslog_facility)
 
-FN_LOCAL_STRING(lp_name, name)
+FN_GLOBAL_INTEGER(lp_rsync_port, &Globals.rsync_port)
+
+FN_LOCAL_STRING(lp_auth_users, auth_users)
+FN_LOCAL_STRING(lp_charset, charset)
 FN_LOCAL_STRING(lp_comment, comment)
-FN_LOCAL_STRING(lp_path, path)
-FN_LOCAL_STRING(lp_lock_file, lock_file)
-FN_LOCAL_BOOL(lp_read_only, read_only)
-FN_LOCAL_BOOL(lp_list, list)
-FN_LOCAL_BOOL(lp_use_chroot, use_chroot)
-FN_LOCAL_BOOL(lp_transfer_logging, transfer_logging)
-FN_LOCAL_STRING(lp_uid, uid)
+FN_LOCAL_STRING(lp_dont_compress, dont_compress)
+FN_LOCAL_STRING(lp_exclude, exclude)
+FN_LOCAL_STRING(lp_exclude_from, exclude_from)
+FN_LOCAL_STRING(lp_filter, filter)
 FN_LOCAL_STRING(lp_gid, gid)
 FN_LOCAL_STRING(lp_hosts_allow, hosts_allow)
 FN_LOCAL_STRING(lp_hosts_deny, hosts_deny)
-FN_LOCAL_STRING(lp_auth_users, auth_users)
-FN_LOCAL_STRING(lp_secrets_file, secrets_file)
-FN_LOCAL_BOOL(lp_strict_modes, strict_modes)
-FN_LOCAL_STRING(lp_exclude, exclude)
-FN_LOCAL_STRING(lp_exclude_from, exclude_from)
 FN_LOCAL_STRING(lp_include, include)
 FN_LOCAL_STRING(lp_include_from, include_from)
+FN_LOCAL_STRING(lp_incoming_chmod, incoming_chmod)
+FN_LOCAL_STRING(lp_lock_file, lock_file)
+FN_LOCAL_STRING(lp_log_file, log_file)
 FN_LOCAL_STRING(lp_log_format, log_format)
+FN_LOCAL_STRING(lp_name, name)
+FN_LOCAL_STRING(lp_outgoing_chmod, outgoing_chmod)
+FN_LOCAL_STRING(lp_path, path)
+FN_LOCAL_STRING(lp_postxfer_exec, postxfer_exec)
+FN_LOCAL_STRING(lp_prexfer_exec, prexfer_exec)
 FN_LOCAL_STRING(lp_refuse_options, refuse_options)
-FN_LOCAL_STRING(lp_dont_compress, dont_compress)
-FN_LOCAL_INTEGER(lp_timeout, timeout)
+FN_LOCAL_STRING(lp_secrets_file, secrets_file)
+FN_LOCAL_STRING(lp_temp_dir, temp_dir)
+FN_LOCAL_STRING(lp_uid, uid)
+
 FN_LOCAL_INTEGER(lp_max_connections, max_connections)
+FN_LOCAL_INTEGER(lp_max_verbosity, max_verbosity)
+FN_LOCAL_INTEGER(lp_syslog_facility, syslog_facility)
+FN_LOCAL_INTEGER(lp_timeout, timeout)
+
+FN_LOCAL_BOOL(lp_fake_super, fake_super)
+FN_LOCAL_BOOL(lp_ignore_errors, ignore_errors)
+FN_LOCAL_BOOL(lp_ignore_nonreadable, ignore_nonreadable)
+FN_LOCAL_BOOL(lp_list, list)
+FN_LOCAL_BOOL(lp_munge_symlinks, munge_symlinks)
+FN_LOCAL_BOOL(lp_numeric_ids, numeric_ids)
+FN_LOCAL_BOOL(lp_read_only, read_only)
+FN_LOCAL_BOOL(lp_strict_modes, strict_modes)
+FN_LOCAL_BOOL(lp_transfer_logging, transfer_logging)
+FN_LOCAL_BOOL(lp_use_chroot, use_chroot)
+FN_LOCAL_BOOL(lp_write_only, write_only)
 
 /* local prototypes */
-static int    strwicmp( char *psz1, char *psz2 );
-static int    map_parameter( char *parmname);
-static BOOL   set_boolean( BOOL *pb, char *parmvalue );
+static int    strwicmp(char *psz1, char *psz2);
+static int    map_parameter(char *parmname);
+static BOOL   set_boolean(BOOL *pb, char *parmvalue);
 static int    getservicebyname(char *name, service *pserviceDest);
-static void   copy_service( service *pserviceDest, 
-                            service *pserviceSource);
+static void   copy_service(service *pserviceDest, service *pserviceSource);
 static BOOL   do_parameter(char *parmname, char *parmvalue);
 static BOOL   do_section(char *sectionname);
 
 
 /***************************************************************************
-initialise a service to the defaults
+* initialise a service to the defaults
 ***************************************************************************/
 static void init_service(service *pservice)
 {
@@ -373,20 +459,34 @@ static void init_service(service *pservice)
 	copy_service(pservice,&sDefault);
 }
 
-static void string_set(char **s, char *v)
+
+/**
+ * Assign a copy of @p v to @p *s.  Handles NULL strings.  @p *v must
+ * be initialized when this is called, either to NULL or a malloc'd
+ * string.
+ *
+ * @fixme There is a small leak here in that sometimes the existing
+ * value will be dynamically allocated, and the old copy is lost.
+ * However, we can't always deallocate the old value, because in the
+ * case of sDefault, it points to a static string.  It would be nice
+ * to have either all-strdup'd values, or to never need to free
+ * memory.
+ **/
+static void string_set(char **s, const char *v)
 {
 	if (!v) {
 		*s = NULL;
 		return;
 	}
 	*s = strdup(v);
-	if (!*s) exit_cleanup(RERR_MALLOC);
+	if (!*s)
+		exit_cleanup(RERR_MALLOC);
 }
 
 
 /***************************************************************************
-add a new service to the services array initialising it with the given 
-service
+* add a new service to the services array initialising it with the given
+* service
 ***************************************************************************/
 static int add_a_service(service *pservice, char *name)
 {
@@ -397,7 +497,7 @@ static int add_a_service(service *pservice, char *name)
   tservice = *pservice;
 
   /* it might already exist */
-  if (name) 
+  if (name)
     {
       i = getservicebyname(name,NULL);
       if (i >= 0)
@@ -406,10 +506,10 @@ static int add_a_service(service *pservice, char *name)
 
   i = iNumServices;
 
-  ServicePtrs = (service **)Realloc(ServicePtrs,sizeof(service *)*num_to_alloc);
+  ServicePtrs = realloc_array(ServicePtrs, service *, num_to_alloc);
 
   if (ServicePtrs)
-	  pSERVICE(iNumServices) = (service *)malloc(sizeof(service));
+	  pSERVICE(iNumServices) = new(service);
 
   if (!ServicePtrs || !pSERVICE(iNumServices))
 	  return(-1);
@@ -419,13 +519,13 @@ static int add_a_service(service *pservice, char *name)
   init_service(pSERVICE(i));
   copy_service(pSERVICE(i),&tservice);
   if (name)
-    string_set(&iSERVICE(i).name,name);  
+    string_set(&iSERVICE(i).name,name);
 
   return(i);
 }
 
 /***************************************************************************
-Do a case-insensitive, whitespace-ignoring string compare.
+* Do a case-insensitive, whitespace-ignoring string compare.
 ***************************************************************************/
 static int strwicmp(char *psz1, char *psz2)
 {
@@ -443,11 +543,11 @@ static int strwicmp(char *psz1, char *psz2)
    /* sync the strings on first non-whitespace */
    while (1)
    {
-      while (isspace(*psz1))
+      while (isSpace(psz1))
          psz1++;
-      while (isspace(*psz2))
+      while (isSpace(psz2))
          psz2++;
-      if (toupper(*psz1) != toupper(*psz2) || *psz1 == '\0' || *psz2 == '\0')
+      if (toUpper(psz1) != toUpper(psz2) || *psz1 == '\0' || *psz2 == '\0')
          break;
       psz1++;
       psz2++;
@@ -456,8 +556,8 @@ static int strwicmp(char *psz1, char *psz2)
 }
 
 /***************************************************************************
-Map a parameter's string representation to something we can use. 
-Returns False if the parameter string is not recognised, else TRUE.
+* Map a parameter's string representation to something we can use.
+* Returns False if the parameter string is not recognised, else TRUE.
 ***************************************************************************/
 static int map_parameter(char *parmname)
 {
@@ -466,19 +566,19 @@ static int map_parameter(char *parmname)
    if (*parmname == '-')
      return(-1);
 
-   for (iIndex = 0; parm_table[iIndex].label; iIndex++) 
+   for (iIndex = 0; parm_table[iIndex].label; iIndex++)
       if (strwicmp(parm_table[iIndex].label, parmname) == 0)
          return(iIndex);
 
-   rprintf(FERROR, "Unknown Parameter encountered: \"%s\"\n", parmname);
+   rprintf(FLOG, "Unknown Parameter encountered: \"%s\"\n", parmname);
    return(-1);
 }
 
 
 /***************************************************************************
-Set a boolean variable from the text value stored in the passed string.
-Returns True in success, False if the passed string does not correctly 
-represent a boolean.
+* Set a boolean variable from the text value stored in the passed string.
+* Returns True in success, False if the passed string does not correctly
+* represent a boolean.
 ***************************************************************************/
 static BOOL set_boolean(BOOL *pb, char *parmvalue)
 {
@@ -496,7 +596,7 @@ static BOOL set_boolean(BOOL *pb, char *parmvalue)
          *pb = False;
       else
       {
-         rprintf(FERROR, "Badly formed boolean in configuration file: \"%s\".\n",
+         rprintf(FLOG, "Badly formed boolean in configuration file: \"%s\".\n",
                parmvalue);
          bRetval = False;
       }
@@ -504,14 +604,14 @@ static BOOL set_boolean(BOOL *pb, char *parmvalue)
 }
 
 /***************************************************************************
-Find a service by name. Otherwise works like get_service.
+* Find a service by name. Otherwise works like get_service.
 ***************************************************************************/
 static int getservicebyname(char *name, service *pserviceDest)
 {
    int iService;
 
    for (iService = iNumServices - 1; iService >= 0; iService--)
-      if (strwicmp(iSERVICE(iService).name, name) == 0) 
+      if (strwicmp(iSERVICE(iService).name, name) == 0)
       {
          if (pserviceDest != NULL)
 	   copy_service(pserviceDest, pSERVICE(iService));
@@ -524,10 +624,9 @@ static int getservicebyname(char *name, service *pserviceDest)
 
 
 /***************************************************************************
-Copy a service structure to another
-
+* Copy a service structure to another
 ***************************************************************************/
-static void copy_service(service *pserviceDest, 
+static void copy_service(service *pserviceDest,
                          service *pserviceSource)
 {
   int i;
@@ -535,9 +634,9 @@ static void copy_service(service *pserviceDest,
   for (i=0;parm_table[i].label;i++)
     if (parm_table[i].ptr && parm_table[i].class == P_LOCAL) {
 	void *def_ptr = parm_table[i].ptr;
-	void *src_ptr = 
+	void *src_ptr =
 	  ((char *)pserviceSource) + PTR_DIFF(def_ptr,&sDefault);
-	void *dest_ptr = 
+	void *dest_ptr =
 	  ((char *)pserviceDest) + PTR_DIFF(def_ptr,&sDefault);
 
 	switch (parm_table[i].type)
@@ -557,6 +656,7 @@ static void copy_service(service *pserviceDest,
 	    *(char *)dest_ptr = *(char *)src_ptr;
 	    break;
 
+	  case P_PATH:
 	  case P_STRING:
 	    string_set(dest_ptr,*(char **)src_ptr);
 	    break;
@@ -569,20 +669,21 @@ static void copy_service(service *pserviceDest,
 
 
 /***************************************************************************
-Process a parameter for a particular service number. If snum < 0
-then assume we are in the globals
+* Process a parameter for a particular service number. If snum < 0
+* then assume we are in the globals
 ***************************************************************************/
 static BOOL lp_do_parameter(int snum, char *parmname, char *parmvalue)
 {
    int parmnum, i;
    void *parm_ptr=NULL; /* where we are going to store the result */
    void *def_ptr=NULL;
+   char *cp;
 
    parmnum = map_parameter(parmname);
 
    if (parmnum < 0)
      {
-       rprintf(FERROR, "IGNORING unknown parameter \"%s\"\n", parmname);
+       rprintf(FLOG, "IGNORING unknown parameter \"%s\"\n", parmname);
        return(True);
      }
 
@@ -593,7 +694,7 @@ static BOOL lp_do_parameter(int snum, char *parmname, char *parmvalue)
      parm_ptr = def_ptr;
    } else {
        if (parm_table[parmnum].class == P_GLOBAL) {
-	   rprintf(FERROR, "Global parameter %s found in service section!\n",parmname);
+	   rprintf(FLOG, "Global parameter %s found in service section!\n",parmname);
 	   return(True);
 	 }
        parm_ptr = ((char *)pSERVICE(snum)) + PTR_DIFF(def_ptr,&sDefault);
@@ -623,6 +724,15 @@ static BOOL lp_do_parameter(int snum, char *parmname, char *parmvalue)
        sscanf(parmvalue,"%o",(int *)parm_ptr);
        break;
 
+     case P_PATH:
+       string_set(parm_ptr,parmvalue);
+       if ((cp = *(char**)parm_ptr) != NULL) {
+	   int len = strlen(cp);
+	   while (len > 1 && cp[len-1] == '/') len--;
+	   cp[len] = '\0';
+       }
+       break;
+
      case P_STRING:
        string_set(parm_ptr,parmvalue);
        break;
@@ -651,7 +761,7 @@ static BOOL lp_do_parameter(int snum, char *parmname, char *parmvalue)
 }
 
 /***************************************************************************
-Process a parameter.
+* Process a parameter.
 ***************************************************************************/
 static BOOL do_parameter(char *parmname, char *parmvalue)
 {
@@ -659,9 +769,9 @@ static BOOL do_parameter(char *parmname, char *parmvalue)
 }
 
 /***************************************************************************
-Process a new section (service). At this stage all sections are services.
-Later we'll have special sections that permit server parameters to be set.
-Returns True on success, False on failure.
+* Process a new section (service). At this stage all sections are services.
+* Later we'll have special sections that permit server parameters to be set.
+* Returns True on success, False on failure.
 ***************************************************************************/
 static BOOL do_section(char *sectionname)
 {
@@ -674,7 +784,7 @@ static BOOL do_section(char *sectionname)
      init_locals();
 
    /* if we've just struck a global section, note the fact. */
-   bInGlobalSection = isglobal;   
+   bInGlobalSection = isglobal;
 
    /* check for multiple global sections */
    if (bInGlobalSection)
@@ -682,6 +792,11 @@ static BOOL do_section(char *sectionname)
      return(True);
    }
 
+   if (strchr(sectionname, '/') != NULL) {
+     rprintf(FLOG, "Warning: invalid section name in configuration file: %s\n", sectionname);
+     return False;
+   }
+
    /* if we have a current service, tidy it up before moving on */
    bRetval = True;
 
@@ -696,7 +811,7 @@ static BOOL do_section(char *sectionname)
 
        if ((iServiceIndex=add_a_service(&sDefault,sectionname)) < 0)
 	 {
-	   rprintf(FERROR,"Failed to add a new service\n");
+	   rprintf(FLOG, "Failed to add a new service\n");
 	   return(False);
 	 }
      }
@@ -706,34 +821,32 @@ static BOOL do_section(char *sectionname)
 
 
 /***************************************************************************
-Load the services array from the services file. Return True on success, 
-False on failure.
+* Load the services array from the services file. Return True on success,
+* False on failure.
 ***************************************************************************/
 BOOL lp_load(char *pszFname, int globals_only)
 {
 	pstring n2;
 	BOOL bRetval;
- 
+
 	bRetval = False;
 
 	bInGlobalSection = True;
-  
+
 	init_globals();
 
-	pstrcpy(n2,pszFname);
+	pstrcpy(n2, pszFname);
 
 	/* We get sections first, so have to start 'behind' to make up */
 	iServiceIndex = -1;
 	bRetval = pm_process(n2, globals_only?NULL:do_section, do_parameter);
-  
-	bLoaded = True;
 
 	return (bRetval);
 }
 
 
 /***************************************************************************
-return the max number of services
+* return the max number of services
 ***************************************************************************/
 int lp_numservices(void)
 {
@@ -741,17 +854,17 @@ int lp_numservices(void)
 }
 
 /***************************************************************************
-Return the number of the service with the given name, or -1 if it doesn't
-exist. Note that this is a DIFFERENT ANIMAL from the internal function
-getservicebyname()! This works ONLY if all services have been loaded, and
-does not copy the found service.
+* Return the number of the service with the given name, or -1 if it doesn't
+* exist. Note that this is a DIFFERENT ANIMAL from the internal function
+* getservicebyname()! This works ONLY if all services have been loaded, and
+* does not copy the found service.
 ***************************************************************************/
 int lp_number(char *name)
 {
    int iService;
 
    for (iService = iNumServices - 1; iService >= 0; iService--)
-      if (strequal(lp_name(iService), name)) 
+      if (strcmp(lp_name(iService), name) == 0)
          break;
 
    return (iService);

match.c

@@ -1,244 +1,302 @@
-/* 
-   Copyright (C) Andrew Tridgell 1996
-   Copyright (C) Paul Mackerras 1996
-   
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2 of the License, or
-   (at your option) any later version.
-   
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-   
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
+/*
+ * Block matching used by the file-transfer code.
+ *
+ * Copyright (C) 1996 Andrew Tridgell
+ * Copyright (C) 1996 Paul Mackerras
+ * Copyright (C) 2003-2008 Wayne Davison
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, visit the http://fsf.org website.
+ */
 
 #include "rsync.h"
 
-extern int csum_length;
-
 extern int verbose;
-extern int am_server;
+extern int do_progress;
+extern int checksum_seed;
+extern int append_mode;
 
-extern int remote_version;
-
-typedef unsigned short tag;
-
-#define TABLESIZE (1<<16)
-#define NULL_TAG (-1)
+int updating_basis_file;
 
 static int false_alarms;
-static int tag_hits;
+static int hash_hits;
 static int matches;
 static int64 data_transfer;
 
 static int total_false_alarms;
-static int total_tag_hits;
+static int total_hash_hits;
 static int total_matches;
 
 extern struct stats stats;
 
-struct target {
-  tag t;
-  int i;
-};
+#define TRADITIONAL_TABLESIZE (1<<16)
 
-static struct target *targets;
+static uint32 tablesize;
+static int32 *hash_table;
 
-static int *tag_table;
-
-#define gettag2(s1,s2) (((s1) + (s2)) & 0xFFFF)
-#define gettag(sum) gettag2((sum)&0xFFFF,(sum)>>16)
-
-static int compare_targets(struct target *t1,struct target *t2)
-{
-  return((int)t1->t - (int)t2->t);
-}
+#define SUM2HASH2(s1,s2) (((s1) + (s2)) & 0xFFFF)
+#define SUM2HASH(sum) SUM2HASH2((sum)&0xFFFF,(sum)>>16)
 
+#define BIG_SUM2HASH(sum) ((sum)%tablesize)
 
 static void build_hash_table(struct sum_struct *s)
 {
-  int i;
+	static uint32 alloc_size;
+	int32 i;
 
-  if (!tag_table)
-    tag_table = (int *)malloc(sizeof(tag_table[0])*TABLESIZE);
+	/* Dynamically calculate the hash table size so that the hash load
+	 * for big files is about 80%.  A number greater than the traditional
+	 * size must be odd or s2 will not be able to span the entire set. */
+	tablesize = (uint32)(s->count/8) * 10 + 11;
+	if (tablesize < TRADITIONAL_TABLESIZE)
+		tablesize = TRADITIONAL_TABLESIZE;
+	if (tablesize > alloc_size || tablesize < alloc_size - 16*1024) {
+		if (hash_table)
+			free(hash_table);
+		hash_table = new_array(int32, tablesize);
+		if (!hash_table)
+			out_of_memory("build_hash_table");
+		alloc_size = tablesize;
+	}
 
-  targets = (struct target *)malloc(sizeof(targets[0])*s->count);
-  if (!tag_table || !targets) 
-    out_of_memory("build_hash_table");
+	memset(hash_table, 0xFF, tablesize * sizeof hash_table[0]);
 
-  for (i=0;i<s->count;i++) {
-    targets[i].i = i;
-    targets[i].t = gettag(s->sums[i].sum1);
-  }
-
-  qsort(targets,s->count,sizeof(targets[0]),(int (*)())compare_targets);
-
-  for (i=0;i<TABLESIZE;i++)
-    tag_table[i] = NULL_TAG;
-
-  for (i=s->count-1;i>=0;i--) {    
-    tag_table[targets[i].t] = i;
-  }
+	if (tablesize == TRADITIONAL_TABLESIZE) {
+		for (i = 0; i < s->count; i++) {
+			uint32 t = SUM2HASH(s->sums[i].sum1);
+			s->sums[i].chain = hash_table[t];
+			hash_table[t] = i;
+		}
+	} else {
+		for (i = 0; i < s->count; i++) {
+			uint32 t = BIG_SUM2HASH(s->sums[i].sum1);
+			s->sums[i].chain = hash_table[t];
+			hash_table[t] = i;
+		}
+	}
 }
 
 
 static OFF_T last_match;
 
 
-static void matched(int f,struct sum_struct *s,struct map_struct *buf,
-		    OFF_T offset,int i)
+/**
+ * Transmit a literal and/or match token.
+ *
+ * This delightfully-named function is called either when we find a
+ * match and need to transmit all the unmatched data leading up to it,
+ * or when we get bored of accumulating literal data and just need to
+ * transmit it.  As a result of this second case, it is called even if
+ * we have not matched at all!
+ *
+ * @param i If >0, the number of a matched token.  If 0, indicates we
+ * have only literal data.
+ **/
+static void matched(int f, struct sum_struct *s, struct map_struct *buf,
+		    OFF_T offset, int32 i)
 {
-	OFF_T n = offset - last_match;
-	OFF_T j;
+	int32 n = (int32)(offset - last_match); /* max value: block_size (int32) */
+	int32 j;
 
-	if (verbose > 2 && i >= 0)
-		rprintf(FINFO,"match at %d last_match=%d j=%d len=%d n=%d\n",
-			(int)offset,(int)last_match,i,(int)s->sums[i].len,(int)n);
+	if (verbose > 2 && i >= 0) {
+		rprintf(FINFO,
+			"match at %.0f last_match=%.0f j=%d len=%ld n=%ld\n",
+			(double)offset, (double)last_match, i,
+			(long)s->sums[i].len, (long)n);
+	}
 
-	send_token(f,i,buf,last_match,n,i<0?0:s->sums[i].len);
+	send_token(f, i, buf, last_match, n, i < 0 ? 0 : s->sums[i].len);
 	data_transfer += n;
 
 	if (i >= 0) {
 		stats.matched_data += s->sums[i].len;
 		n += s->sums[i].len;
 	}
-  
-	for (j=0;j<n;j+=CHUNK_SIZE) {
-		int n1 = MIN(CHUNK_SIZE,n-j);
-		sum_update(map_ptr(buf,last_match+j,n1),n1);
-	}
 
+	for (j = 0; j < n; j += CHUNK_SIZE) {
+		int32 n1 = MIN(CHUNK_SIZE, n - j);
+		sum_update(map_ptr(buf, last_match + j, n1), n1);
+	}
 
 	if (i >= 0)
 		last_match = offset + s->sums[i].len;
 	else
 		last_match = offset;
 
-	if (buf)
+	if (buf && do_progress)
 		show_progress(last_match, buf->file_size);
-
-	if (i == -1) end_progress();
 }
 
 
 static void hash_search(int f,struct sum_struct *s,
-			struct map_struct *buf,OFF_T len)
+			struct map_struct *buf, OFF_T len)
 {
-	OFF_T offset;
-	int j,k, last_i;
-	int end;
+	OFF_T offset, end;
+	int32 k, want_i, backup;
 	char sum2[SUM_LENGTH];
-	uint32 s1, s2, sum; 
+	uint32 s1, s2, sum;
+	int more;
 	schar *map;
 
-	/* last_i is used to encourage adjacent matches, allowing the RLL coding of the
-	   output to work more efficiently */
-	last_i = -1;
+	/* want_i is used to encourage adjacent matches, allowing the RLL
+	 * coding of the output to work more efficiently. */
+	want_i = 0;
 
-	if (verbose > 2)
-		rprintf(FINFO,"hash search b=%d len=%d\n",s->n,(int)len);
+	if (verbose > 2) {
+		rprintf(FINFO, "hash search b=%ld len=%.0f\n",
+			(long)s->blength, (double)len);
+	}
+
+	k = (int32)MIN(len, (OFF_T)s->blength);
+
+	map = (schar *)map_ptr(buf, 0, k);
 
-	k = MIN(len, s->n);
-	
-	map = (schar *)map_ptr(buf,0,k);
-	
 	sum = get_checksum1((char *)map, k);
 	s1 = sum & 0xFFFF;
 	s2 = sum >> 16;
 	if (verbose > 3)
-		rprintf(FINFO, "sum=%.8x k=%d\n", sum, k);
-	
+		rprintf(FINFO, "sum=%.8x k=%ld\n", sum, (long)k);
+
 	offset = 0;
-	
+
 	end = len + 1 - s->sums[s->count-1].len;
-	
-	if (verbose > 3)
-		rprintf(FINFO,"hash search s->n=%d len=%d count=%d\n",
-			s->n,(int)len,s->count);
-	
+
+	if (verbose > 3) {
+		rprintf(FINFO, "hash search s->blength=%ld len=%.0f count=%.0f\n",
+			(long)s->blength, (double)len, (double)s->count);
+	}
+
 	do {
-		tag t = gettag2(s1,s2);
 		int done_csum2 = 0;
-			
-		j = tag_table[t];
-		if (verbose > 4)
-			rprintf(FINFO,"offset=%d sum=%08x\n",(int)offset,sum);
-		
-		if (j == NULL_TAG) {
-			goto null_tag;
+		int32 i;
+
+		if (verbose > 4) {
+			rprintf(FINFO, "offset=%.0f sum=%04x%04x\n",
+				(double)offset, s2 & 0xFFFF, s1 & 0xFFFF);
 		}
 
-		sum = (s1 & 0xffff) | (s2 << 16);
-		tag_hits++;
-		for (; j<s->count && targets[j].t == t; j++) {
-			int l, i = targets[j].i;
-			
-			if (sum != s->sums[i].sum1) continue;
-			
-			/* also make sure the two blocks are the same length */
-			l = MIN(s->n,len-offset);
-			if (l != s->sums[i].len) continue;			
+		if (tablesize == TRADITIONAL_TABLESIZE) {
+			if ((i = hash_table[SUM2HASH2(s1,s2)]) < 0)
+				goto null_hash;
+			sum = (s1 & 0xffff) | (s2 << 16);
+		} else {
+			sum = (s1 & 0xffff) | (s2 << 16);
+			if ((i = hash_table[BIG_SUM2HASH(sum)]) < 0)
+				goto null_hash;
+		}
+
+		hash_hits++;
+		do {
+			int32 l;
+
+			if (sum != s->sums[i].sum1)
+				continue;
+
+			/* also make sure the two blocks are the same length */
+			l = (int32)MIN((OFF_T)s->blength, len-offset);
+			if (l != s->sums[i].len)
+				continue;
+
+			/* in-place: ensure chunk's offset is either >= our
+			 * offset or that the data didn't move. */
+			if (updating_basis_file && s->sums[i].offset < offset
+			    && !(s->sums[i].flags & SUMFLG_SAME_OFFSET))
+				continue;
+
+			if (verbose > 3) {
+				rprintf(FINFO,
+					"potential match at %.0f i=%ld sum=%08x\n",
+					(double)offset, (long)i, sum);
+			}
 
-			if (verbose > 3)
-				rprintf(FINFO,"potential match at %d target=%d %d sum=%08x\n",
-					(int)offset,j,i,sum);
-			
 			if (!done_csum2) {
 				map = (schar *)map_ptr(buf,offset,l);
 				get_checksum2((char *)map,l,sum2);
 				done_csum2 = 1;
 			}
-			
-			if (memcmp(sum2,s->sums[i].sum2,csum_length) != 0) {
+
+			if (memcmp(sum2,s->sums[i].sum2,s->s2length) != 0) {
 				false_alarms++;
 				continue;
 			}
 
-			/* we've found a match, but now check to see
-                           if last_i can hint at a better match */
-			for (j++; j<s->count && targets[j].t == t; j++) {
-				int i2 = targets[j].i;
-				if (i2 == last_i + 1) {
-					if (sum != s->sums[i2].sum1) break;
-					if (memcmp(sum2,s->sums[i2].sum2,csum_length) != 0) break;
-					/* we've found an adjacent match - the RLL coder 
-					   will be happy */
-					i = i2;
-					break;
+			/* When updating in-place, the best possible match is
+			 * one with an identical offset, so we prefer that over
+			 * the following want_i optimization. */
+			if (updating_basis_file) {
+				int32 i2;
+				for (i2 = i; i2 >= 0; i2 = s->sums[i2].chain) {
+					if (s->sums[i2].offset != offset)
+						continue;
+					if (i2 != i) {
+						if (sum != s->sums[i2].sum1)
+							break;
+						if (memcmp(sum2, s->sums[i2].sum2,
+							   s->s2length) != 0)
+							break;
+						i = i2;
+					}
+					/* This chunk was at the same offset on
+					 * both the sender and the receiver. */
+					s->sums[i].flags |= SUMFLG_SAME_OFFSET;
+					goto set_want_i;
 				}
 			}
 
-			last_i = i;
-			
+			/* we've found a match, but now check to see
+			 * if want_i can hint at a better match. */
+			if (i != want_i && want_i < s->count
+			    && (!updating_basis_file || s->sums[want_i].offset >= offset
+			     || s->sums[want_i].flags & SUMFLG_SAME_OFFSET)
+			    && sum == s->sums[want_i].sum1
+			    && memcmp(sum2, s->sums[want_i].sum2, s->s2length) == 0) {
+				/* we've found an adjacent match - the RLL coder
+				 * will be happy */
+				i = want_i;
+			}
+		    set_want_i:
+			want_i = i + 1;
+
 			matched(f,s,buf,offset,i);
 			offset += s->sums[i].len - 1;
-			k = MIN((len-offset), s->n);
-			map = (schar *)map_ptr(buf,offset,k);
+			k = (int32)MIN((OFF_T)s->blength, len-offset);
+			map = (schar *)map_ptr(buf, offset, k);
 			sum = get_checksum1((char *)map, k);
 			s1 = sum & 0xFFFF;
 			s2 = sum >> 16;
 			matches++;
 			break;
-		}
-		
-	null_tag:
+		} while ((i = s->sums[i].chain) >= 0);
+
+	  null_hash:
+		backup = (int32)(offset - last_match);
+		/* We sometimes read 1 byte prior to last_match... */
+		if (backup < 0)
+			backup = 0;
+
 		/* Trim off the first byte from the checksum */
-		map = (schar *)map_ptr(buf,offset,k+1);
+		more = offset + k < len;
+		map = (schar *)map_ptr(buf, offset - backup, k + more + backup)
+		    + backup;
 		s1 -= map[0] + CHAR_OFFSET;
 		s2 -= k * (map[0]+CHAR_OFFSET);
-		
+
 		/* Add on the next byte (if there is one) to the checksum */
-		if (k < (len-offset)) {
-			s1 += (map[k]+CHAR_OFFSET);
+		if (more) {
+			s1 += map[k] + CHAR_OFFSET;
 			s2 += s1;
-		} else {
+		} else
 			--k;
-		}
 
 		/* By matching early we avoid re-reading the
 		   data 3 times in the case where a token
@@ -246,67 +304,95 @@ static void hash_search(int f,struct sum_struct *s,
 		   match. The 3 reads are caused by the
 		   running match, the checksum update and the
 		   literal send. */
-		if (offset-last_match >= CHUNK_SIZE+s->n && 
-		    (end-offset > CHUNK_SIZE)) {
-			matched(f,s,buf,offset - s->n, -2);
-		}
+		if (backup >= s->blength+CHUNK_SIZE && end-offset > CHUNK_SIZE)
+			matched(f, s, buf, offset - s->blength, -2);
 	} while (++offset < end);
-	
-	matched(f,s,buf,len,-1);
-	map_ptr(buf,len-1,1);
+
+	matched(f, s, buf, len, -1);
+	map_ptr(buf, len-1, 1);
 }
 
 
-void match_sums(int f,struct sum_struct *s,struct map_struct *buf,OFF_T len)
+/**
+ * Scan through a origin file, looking for sections that match
+ * checksums from the generator, and transmit either literal or token
+ * data.
+ *
+ * Also calculates the MD4 checksum of the whole file, using the md
+ * accumulator.  This is transmitted with the file as protection
+ * against corruption on the wire.
+ *
+ * @param s Checksums received from the generator.  If <tt>s->count ==
+ * 0</tt>, then there are actually no checksums for this file.
+ *
+ * @param len Length of the file to send.
+ **/
+void match_sums(int f, struct sum_struct *s, struct map_struct *buf, OFF_T len)
 {
-	char file_sum[MD4_SUM_LENGTH];
+	char file_sum[MAX_DIGEST_LEN];
+	int sum_len;
 
 	last_match = 0;
 	false_alarms = 0;
-	tag_hits = 0;
-	matches=0;
-	data_transfer=0;
+	hash_hits = 0;
+	matches = 0;
+	data_transfer = 0;
 
-	sum_init();
+	sum_init(checksum_seed);
 
-	if (len > 0 && s->count>0) {
+	if (append_mode > 0) {
+		if (append_mode == 2) {
+			OFF_T j = 0;
+			for (j = CHUNK_SIZE; j < s->flength; j += CHUNK_SIZE) {
+				if (buf && do_progress)
+					show_progress(last_match, buf->file_size);
+				sum_update(map_ptr(buf, last_match, CHUNK_SIZE),
+					   CHUNK_SIZE);
+				last_match = j;
+			}
+			if (last_match < s->flength) {
+				int32 n = (int32)(s->flength - last_match);
+				if (buf && do_progress)
+					show_progress(last_match, buf->file_size);
+				sum_update(map_ptr(buf, last_match, n), n);
+			}
+		}
+		last_match = s->flength;
+		s->count = 0;
+	}
+
+	if (len > 0 && s->count > 0) {
 		build_hash_table(s);
-		
-		if (verbose > 2) 
+
+		if (verbose > 2)
 			rprintf(FINFO,"built hash table\n");
-		
-		hash_search(f,s,buf,len);
-		
-		if (verbose > 2) 
+
+		hash_search(f, s, buf, len);
+
+		if (verbose > 2)
 			rprintf(FINFO,"done hash search\n");
 	} else {
 		OFF_T j;
 		/* by doing this in pieces we avoid too many seeks */
-		for (j=0;j<(len-CHUNK_SIZE);j+=CHUNK_SIZE) {
-			int n1 = MIN(CHUNK_SIZE,(len-CHUNK_SIZE)-j);
-			matched(f,s,buf,j+n1,-2);
-		}
-		matched(f,s,buf,len,-1);
+		for (j = last_match + CHUNK_SIZE; j < len; j += CHUNK_SIZE)
+			matched(f, s, buf, j, -2);
+		matched(f, s, buf, len, -1);
 	}
 
-	sum_end(file_sum);
+	sum_len = sum_end(file_sum);
+	/* If we had a read error, send a bad checksum. */
+	if (buf && buf->status != 0)
+		file_sum[0]++;
 
-	if (remote_version >= 14) {
-		if (verbose > 2)
-			rprintf(FINFO,"sending file_sum\n");
-		write_buf(f,file_sum,MD4_SUM_LENGTH);
-	}
-
-	if (targets) {
-		free(targets);
-		targets=NULL;
-	}
-	
 	if (verbose > 2)
-		rprintf(FINFO, "false_alarms=%d tag_hits=%d matches=%d\n",
-			false_alarms, tag_hits, matches);
-	
-	total_tag_hits += tag_hits;
+		rprintf(FINFO,"sending file_sum\n");
+	write_buf(f, file_sum, sum_len);
+
+	if (verbose > 2)
+		rprintf(FINFO, "false_alarms=%d hash_hits=%d matches=%d\n",
+			false_alarms, hash_hits, matches);
+
+	total_hash_hits += hash_hits;
 	total_false_alarms += false_alarms;
 	total_matches += matches;
 	stats.literal_data += data_transfer;
@@ -318,8 +404,7 @@ void match_report(void)
 		return;
 
 	rprintf(FINFO,
-		"total: matches=%d  tag_hits=%d  false_alarms=%d data=%.0f\n",
-		total_matches,total_tag_hits,
-		total_false_alarms,
+		"total: matches=%d  hash_hits=%d  false_alarms=%d data=%.0f\n",
+		total_matches, total_hash_hits, total_false_alarms,
 		(double)stats.literal_data);
 }

mkproto.awk

@@ -1,76 +0,0 @@
-# generate prototypes for Samba C code
-# tridge, June 1996
-
-BEGIN {
-  inheader=0;
-  print "/* This file is automatically generated with \"make proto\". DO NOT EDIT */"
-  print ""
-}
-
-{
-  if (inheader) {
-    if (match($0,"[)][ \t]*$")) {
-      inheader = 0;
-      printf "%s;\n",$0;
-    } else {
-      printf "%s\n",$0;
-    }
-    next;
-  }
-}
-
-/^FN_LOCAL_BOOL/ {
-  split($0,a,"[,()]")
-  printf "BOOL %s(int );\n", a[2]
-}
-
-/^FN_LOCAL_STRING/ {
-  split($0,a,"[,()]")
-  printf "char *%s(int );\n", a[2]
-}
-
-/^FN_LOCAL_INT/ {
-  split($0,a,"[,()]")
-  printf "int %s(int );\n", a[2]
-}
-
-/^FN_LOCAL_CHAR/ {
-  split($0,a,"[,()]")
-  printf "char %s(int );\n", a[2]
-}
-
-/^FN_GLOBAL_BOOL/ {
-  split($0,a,"[,()]")
-  printf "BOOL %s(void);\n", a[2]
-}
-
-/^FN_GLOBAL_STRING/ {
-  split($0,a,"[,()]")
-  printf "char *%s(void);\n", a[2]
-}
-
-/^FN_GLOBAL_INT/ {
-  split($0,a,"[,()]")
-  printf "int %s(void);\n", a[2]
-}
-
-/^static|^extern/ || !/^[a-zA-Z]/ || /[;]/ {
-  next;
-}
-
-!/^OFF_T|^size_t|^off_t|^pid_t|^unsigned|^mode_t|^DIR|^user|^int|^char|^uint|^struct|^BOOL|^void|^time/ {
-  next;
-}
-
-
-/[(].*[)][ \t]*$/ {
-    printf "%s;\n",$0;
-    next;
-}
-
-/[(]/ {
-  inheader=1;
-  printf "%s\n",$0;
-  next;
-}
-

mkproto.pl

@@ -0,0 +1,48 @@
+# generate prototypes for rsync
+
+$old_protos = '';
+if (open(IN, 'proto.h')) {
+    $old_protos = join('', <IN>);
+    close IN;
+}
+
+%FN_MAP = (
+    BOOL => 'BOOL ',
+    CHAR => 'char ',
+    INTEGER => 'int ',
+    STRING => 'char *',
+);
+
+$inheader = 0;
+$protos = qq|/* This file is automatically generated with "make proto". DO NOT EDIT */\n\n|;
+
+while (<>) {
+    if ($inheader) {
+	if (/[)][ \t]*$/) {
+	    $inheader = 0;
+	    s/$/;/;
+	}
+	$protos .= $_;
+    } elsif (/^FN_(LOCAL|GLOBAL)_([^(]+)\(([^,()]+)/) {
+	$ret = $FN_MAP{$2};
+	$func = $3;
+	$arg = $1 eq 'LOCAL' ? 'int module_id' : 'void';
+	$protos .= "$ret$func($arg);\n";
+    } elsif (/^static|^extern/ || /[;]/ || !/^[A-Za-z][A-Za-z0-9_]* /) {
+	;
+    } elsif (/[(].*[)][ \t]*$/) {
+	s/$/;/;
+	$protos .= $_;
+    } elsif (/[(]/) {
+	$inheader = 1;
+	$protos .= $_;
+    }
+}
+
+if ($old_protos ne $protos) {
+    open(OUT, '>proto.h') or die $!;
+    print OUT $protos;
+    close OUT;
+}
+
+open(OUT, '>proto.h-tstamp') and close OUT;

packaging/bin/gpg

@@ -0,0 +1,6 @@
+#!/bin/sh -e
+# This script gets git to run gpg with a --passphrase-file option.
+
+PATH=`echo $PATH | sed 's/^[^:]*://'`
+
+gpg --batch --passphrase-file=$GPG_PASSFILE "${@}"

packaging/lsb/rsync.spec

@@ -0,0 +1,71 @@
+Summary: A fast, versatile, remote (and local) file-copying tool
+Name: rsync
+Version: 3.0.1
+%define fullversion %{version}
+Release: 1
+%define srcdir src
+Group: Applications/Internet
+Source0: http://rsync.samba.org/ftp/rsync/%{srcdir}/rsync-%{fullversion}.tar.gz
+Source1: http://rsync.samba.org/ftp/rsync/%{srcdir}/rsync-patches-%{fullversion}.tar.gz
+URL: http://rsync.samba.org/
+
+Prefix: %{_prefix}
+BuildRoot: /var/tmp/%{name}-root
+License: GPL
+
+%description
+Rsync is a fast and extraordinarily versatile file copying tool.  It can
+copy locally, to/from another host over any remote shell, or to/from a
+remote rsync daemon.  It offers a large number of options that control
+every aspect of its behavior and permit very flexible specification of the
+set of files to be copied.  It is famous for its delta-transfer algorithm,
+which reduces the amount of data sent over the network by sending only the
+differences between the source files and the existing files in the
+destination.  Rsync is widely used for backups and mirroring and as an
+improved copy command for everyday use.
+
+%prep
+# Choose one -- setup source only, or setup source + rsync-patches:
+%setup -q -n rsync-%{fullversion}
+#%setup -q -b1 -n rsync-%{fullversion}
+
+# If you you used "%setup -q -b1", choose the patches you wish to apply:
+#patch -p1 <patches/acls.diff
+#patch -p1 <patches/xattrs.diff
+#patch -p1 <patches/remote-option.diff
+#patch -p1 <patches/db.diff
+
+%build
+#./prepare-source
+%configure
+
+make
+
+%install
+rm -rf $RPM_BUILD_ROOT
+
+%makeinstall
+
+mkdir -p $RPM_BUILD_ROOT/etc/xinetd.d
+install -m 644 packaging/lsb/rsync.xinetd $RPM_BUILD_ROOT/etc/xinetd.d/rsync
+
+#install -p -m 755 support/rsyncdb $RPM_BUILD_ROOT/usr/bin/rsyncdb
+
+%clean
+rm -rf $RPM_BUILD_ROOT
+
+%files
+%defattr(-,root,root)
+%doc COPYING README tech_report.tex
+%config(noreplace) /etc/xinetd.d/rsync
+%{_prefix}/bin/rsync*
+%{_mandir}/man1/rsync.1*
+%{_mandir}/man5/rsyncd.conf.5*
+
+%changelog
+* Thu Apr 03 2008 Wayne Davison <wayned@samba.org>
+Released 3.0.1.
+
+* Fri Mar 21 2008 Wayne Davison <wayned@samba.org>
+Added installation of /etc/xinetd.d/rsync file and some commented-out
+lines that demonstrate how to use the rsync-patches tar file.

packaging/lsb/rsync.xinetd

@@ -0,0 +1,13 @@
+# default: off
+# description: The rsync server is a good addition to an ftp server, as it
+#	allows crc checksumming etc.
+service rsync
+{
+	disable	= yes
+	socket_type     = stream
+	wait            = no
+	user            = root
+	server          = /usr/bin/rsync
+	server_args     = --daemon
+	log_on_failure  += USERID
+}

packaging/nightly-rsync

@@ -0,0 +1,121 @@
+#!/usr/bin/perl
+use strict;
+
+# This script expects the directory ~/samba-rsync-ftp to exist and to be a
+# copy of the /home/ftp/pub/rsync dir on samba.org.  It also requires a
+# pristine CVS checkout of rsync (don't use your normal rsync build dir
+# unless you're 100% sure that there are not unchecked-in changes).
+#
+# If this is run with -ctu, it will make an updated "nightly" tar file in
+# the nightly dir.  It will also remove any old tar files, regenerate the
+# HTML man pages in the nightly dir, and then rsync the changes to the
+# samba.org server.
+
+use Getopt::Long;
+use Date::Format;
+
+# Where the local copy of /home/ftp/pub/rsync/dev/nightly should be updated.
+our $dest = $ENV{HOME} . '/samba-rsync-ftp/dev/nightly';
+our $nightly_symlink = "$dest/rsync-HEAD.tar.gz";
+
+our($make_tar, $upload, $help_opt);
+&Getopt::Long::Configure('bundling');
+&usage if !&GetOptions(
+    'make-tar|t' => \$make_tar,
+    'upload|u' => \$upload,
+    'help|h' => \$help_opt,
+) || $help_opt;
+
+our $name = time2str('rsync-HEAD-%Y%m%d-%H%M%Z', time, 'GMT');
+our $ztoday = time2str('%d %b %Y', time);
+our $today = $ztoday;
+our $gen_target = $upload ? 'gensend' : 'gen';
+
+die "$dest does not exist\n" unless -d $dest;
+die "There is no .git dir in the current directory.\n" unless -d '.git';
+die "There is no rsync checkout in the current directory.\n" unless -f 'rsyncd.conf.yo';
+
+if ($make_tar) {
+    open(IN, '-|', 'git status') or die $!;
+    my $status = join('', <IN>);
+    close IN;
+    die "The checkout is not clean:\n", $status unless $status =~ /\nnothing to commit \(working directory clean\)/;
+    die "The checkout is not on the master branch.\n" unless $status =~ /^# On branch master\n/;
+    system "make $gen_target" and die "make $gen_target failed!\n";
+
+    my @extra_files;
+    open(IN, '<', 'Makefile.in') or die "Couldn't open Makefile.in: $!\n";
+    while (<IN>) {
+	if (s/^GENFILES=//) {
+	    while (s/\\$//) {
+		$_ .= <IN>;
+	    }
+	    @extra_files = split(' ', $_);
+	    last;
+	}
+    }
+    close IN;
+
+    print "Creating $name.tar.gz\n";
+    system "rsync -a @extra_files $name/";
+    system "git archive --format=tar --prefix=$name/ HEAD | tar xf -";
+    system "support/git-set-file-times --prefix=$name/";
+    system "fakeroot tar czf $dest/$name.tar.gz $name; rm -rf $name";
+
+    unlink($nightly_symlink);
+    symlink("$name.tar.gz", $nightly_symlink);
+}
+
+foreach my $fn (qw( rsync.yo rsyncd.conf.yo )) {
+    my $yo_tmp = "$dest/$fn";
+    (my $html_fn = "$dest/$fn") =~ s/\.yo/.html/;
+
+    open(IN, '<', $fn) or die $!;
+    undef $/; $_ = <IN>; $/ = "\n";
+    close IN;
+
+    s/^(manpage\([^)]+\)\(\d+\)\()[^)]+(\).*)/$1$today$2/m;
+    #s/^(This man ?page is current for version) \S+ (of rsync)/$1 $version $2/m;
+
+    open(OUT, '>', $yo_tmp) or die $!;
+    print OUT $_;
+    close OUT;
+
+    system 'yodl2html', '-o', $html_fn, $yo_tmp;
+
+    unlink($yo_tmp);
+}
+
+chdir($dest) or die $!;
+
+my $cnt = 0;
+open(PIPE, '-|', 'ls -1t rsync-HEAD-*') or die $!;
+while (<PIPE>) {
+    chomp;
+    next if $cnt++ < 10;
+    unlink($_);
+}
+close PIPE;
+
+system 'ls -ltr';
+
+if ($upload) {
+    my $opt = '';
+    if (defined $ENV{RSYNC_PARTIAL_DIR}) {
+	$opt = " -f 'R $ENV{RSYNC_PARTIAL_DIR}'";
+    }
+    system "rsync$opt -aviHP --delete-after . samba.org:/home/ftp/pub/rsync/dev/nightly";
+}
+
+exit;
+
+sub usage
+{
+    die <<EOT;
+Usage: nightly-rsync [OPTIONS]
+
+ -t, --make-tar    create a new tar file in $dest
+ -u, --upload      upload the revised nightly dir to samba.org
+ -h, --help        display this help
+EOT
+}

packaging/redhat/5.0/rsync.spec

@@ -1,81 +0,0 @@
-Summary: Program for efficient remote updates of files.
-Name: rsync
-Version: 2.3.1
-Release: 1
-Copyright: GPL
-Group: Applications/Networking
-Source:	ftp://samba.anu.edu.au/pub/rsync/rsync-2.3.1.tar.gz
-URL: http://samba.anu.edu.au/rsync/
-Packager: Andrew Tridgell <tridge@samba.anu.edu.au>
-BuildRoot: /tmp/rsync
-
-%description
-rsync is a replacement for rcp that has many more features.
-
-rsync uses the "rsync algorithm" which provides a very fast method for
-bringing remote files into sync. It does this by sending just the
-differences in the files across the link, without requiring that both
-sets of files are present at one of the ends of the link beforehand.
-
-A technical report describing the rsync algorithm is included with
-this package. 
-
-%changelog
-* Mon Jan 25 1999 Stefan Hornburg <racke@linuxia.de>
-  quoted RPM_OPT_FLAGS for the sake of robustness  
-* Mon May 18 1998 Andrew Tridgell <tridge@samba.anu.edu.au>
-  reworked for auto-building when I release rsync (tridge@samba.anu.edu.au)
-
-* Sat May 16 1998 John H Terpstra <jht@aquasoft.com.au>
-  Upgraded to Rsync 2.0.6
-    -new feature anonymous rsync
-
-* Mon Apr  6 1998 Douglas N. Arnold <dna@math.psu.edu>
-
-Upgrade to rsync version 1.7.2.
-
-* Sun Mar  1 1998 Douglas N. Arnold <dna@math.psu.edu>
-
-Built 1.6.9-1 based on the 1.6.3-2 spec file of John A. Martin.
-Changes from 1.6.3-2 packaging: added latex and dvips commands
-to create tech_report.ps.
-
-* Mon Aug 25 1997 John A. Martin <jam@jamux.com>
-
-Built 1.6.3-2 after finding no rsync-1.6.3-1.src.rpm although there
-was an ftp://ftp.redhat.com/pub/contrib/alpha/rsync-1.6.3-1.alpha.rpm
-showing no packager nor signature but giving 
-"Source RPM: rsync-1.6.3-1.src.rpm".
-
-Changes from 1.6.2-1 packaging: added '$RPM_OPT_FLAGS' to make, strip
-to '%build', removed '%prefix'.
-
-* Thu Apr 10 1997 Michael De La Rue <miked@ed.ac.uk>
-
-rsync-1.6.2-1 packaged.  (This entry by jam to credit Michael for the
-previous package(s).)
-
-%prep
-%setup
-
-%build
-./configure --prefix=/usr
-make CFLAGS="$RPM_OPT_FLAGS"
-strip rsync
-
-%install
-mkdir -p $RPM_BUILD_ROOT/usr/{bin,man/{man1,man5}}
-install -m755 rsync $RPM_BUILD_ROOT/usr/bin
-install -m644 rsync.1 $RPM_BUILD_ROOT/usr/man/man1
-install -m644 rsyncd.conf.5 $RPM_BUILD_ROOT/usr/man/man5
-
-%clean
-rm -rf $RPM_BUILD_ROOT
-
-%files
-%attr(-,root,root) /usr/bin/rsync
-%attr(-,root,root) /usr/man/man1/rsync.1
-%attr(-,root,root) /usr/man/man5/rsyncd.conf.5
-%attr(-,root,root) %doc tech_report.tex
-%attr(-,root,root) %doc README
-%attr(-,root,root) %doc COPYING

packaging/redhat/5.0/rsync.spec.tmpl

@@ -1,81 +0,0 @@
-Summary: Program for efficient remote updates of files.
-Name: rsync
-Version: PVERSION
-Release: PRELEASE
-Copyright: GPL
-Group: Applications/Networking
-Source:	ftp://samba.anu.edu.au/pub/rsync/rsync-PVERSION.tar.gz
-URL: http://samba.anu.edu.au/rsync/
-Packager: Andrew Tridgell <tridge@samba.anu.edu.au>
-BuildRoot: /tmp/rsync
-
-%description
-rsync is a replacement for rcp that has many more features.
-
-rsync uses the "rsync algorithm" which provides a very fast method for
-bringing remote files into sync. It does this by sending just the
-differences in the files across the link, without requiring that both
-sets of files are present at one of the ends of the link beforehand.
-
-A technical report describing the rsync algorithm is included with
-this package. 
-
-%changelog
-* Mon Jan 25 1999 Stefan Hornburg <racke@linuxia.de>
-  quoted RPM_OPT_FLAGS for the sake of robustness  
-* Mon May 18 1998 Andrew Tridgell <tridge@samba.anu.edu.au>
-  reworked for auto-building when I release rsync (tridge@samba.anu.edu.au)
-
-* Sat May 16 1998 John H Terpstra <jht@aquasoft.com.au>
-  Upgraded to Rsync 2.0.6
-    -new feature anonymous rsync
-
-* Mon Apr  6 1998 Douglas N. Arnold <dna@math.psu.edu>
-
-Upgrade to rsync version 1.7.2.
-
-* Sun Mar  1 1998 Douglas N. Arnold <dna@math.psu.edu>
-
-Built 1.6.9-1 based on the 1.6.3-2 spec file of John A. Martin.
-Changes from 1.6.3-2 packaging: added latex and dvips commands
-to create tech_report.ps.
-
-* Mon Aug 25 1997 John A. Martin <jam@jamux.com>
-
-Built 1.6.3-2 after finding no rsync-1.6.3-1.src.rpm although there
-was an ftp://ftp.redhat.com/pub/contrib/alpha/rsync-1.6.3-1.alpha.rpm
-showing no packager nor signature but giving 
-"Source RPM: rsync-1.6.3-1.src.rpm".
-
-Changes from 1.6.2-1 packaging: added '$RPM_OPT_FLAGS' to make, strip
-to '%build', removed '%prefix'.
-
-* Thu Apr 10 1997 Michael De La Rue <miked@ed.ac.uk>
-
-rsync-1.6.2-1 packaged.  (This entry by jam to credit Michael for the
-previous package(s).)
-
-%prep
-%setup
-
-%build
-./configure --prefix=/usr
-make CFLAGS="$RPM_OPT_FLAGS"
-strip rsync
-
-%install
-mkdir -p $RPM_BUILD_ROOT/usr/{bin,man/{man1,man5}}
-install -m755 rsync $RPM_BUILD_ROOT/usr/bin
-install -m644 rsync.1 $RPM_BUILD_ROOT/usr/man/man1
-install -m644 rsyncd.conf.5 $RPM_BUILD_ROOT/usr/man/man5
-
-%clean
-rm -rf $RPM_BUILD_ROOT
-
-%files
-%attr(-,root,root) /usr/bin/rsync
-%attr(-,root,root) /usr/man/man1/rsync.1
-%attr(-,root,root) /usr/man/man5/rsyncd.conf.5
-%attr(-,root,root) %doc tech_report.tex
-%attr(-,root,root) %doc README
-%attr(-,root,root) %doc COPYING

packaging/release-rsync

@@ -0,0 +1,345 @@
+#!/usr/bin/perl
+use strict;
+
+# This script expects the directory ~/samba-rsync-ftp to exist and to be a
+# copy of the /home/ftp/pub/rsync dir on samba.org.  When the script is done,
+# the git repository in the current directory will be updated, and the local
+# ~/samba-rsync-ftp dir will be ready to be rsynced to samba.org.
+
+use Cwd;
+use Term::ReadKey;
+use Date::Format;
+
+my $dest = $ENV{HOME} . '/samba-rsync-ftp';
+my $passfile = $ENV{HOME} . '/.rsyncpass';
+my $path = $ENV{PATH};
+
+my $now = time;
+my $cl_today = time2str('* %a %b %d %Y', $now);
+my $year = time2str('%Y', $now);
+my $ztoday = time2str('%d %b %Y', $now);
+(my $today = $ztoday) =~ s/^0//;
+
+my $curdir = Cwd::cwd;
+
+END {
+    unlink($passfile);
+}
+
+my @extra_files;
+open(IN, '<', 'Makefile.in') or die "Couldn't open Makefile.in: $!\n";
+while (<IN>) {
+    if (s/^GENFILES=//) {
+	while (s/\\$//) {
+	    $_ .= <IN>;
+	}
+	@extra_files = split(' ', $_);
+	last;
+    }
+}
+close IN;
+
+my $break = <<EOT;
+==========================================================================
+EOT
+
+print $break, <<EOT, $break, "\n";
+== This will release a new version of rsync onto an unsuspecting world. ==
+EOT
+
+die "$dest does not exist\n" unless -d $dest;
+die "There is no .git dir in the current directory.\n" unless -d '.git';
+die "'a' must not exist in the current directory.\n" if -e 'a';
+die "'b' must not exist in the current directory.\n" if -e 'b';
+
+open(IN, '-|', 'git status') or die $!;
+my $status = join('', <IN>);
+close IN;
+die "The checkout is not clean:\n", $status unless $status =~ /\nnothing to commit \(working directory clean\)/;
+die "The checkout is not on the master branch.\n" unless $status =~ /^# On branch master\n/;
+
+my $confversion;
+open(IN, '<', 'configure.in') or die $!;
+while (<IN>) {
+    if (/^RSYNC_VERSION=(.*)/) {
+	$confversion = $1;
+	last;
+    }
+}
+close IN;
+die "Unable to find RSYNC_VERSION in configure.in\n" unless defined $confversion;
+
+open(IN, '<', 'OLDNEWS') or die $!;
+$_ = <IN>;
+close IN;
+my($lastversion) = /(\d+\.\d+\.\d+)/;
+
+my $version = $confversion;
+$version =~ s/dev/pre1/ || $version =~ s/pre(\d+)/ 'pre' . ($1 + 1) /e;
+
+print "Please enter the version number of this release: [$version] ";
+chomp($_ = <STDIN>);
+if ($_ eq '.') {
+    $version =~ s/pre\d+//;
+} elsif ($_ ne '') {
+    $version = $_;
+}
+die "Invalid version: `$version'\n" unless $version =~ /^[\d.]+(pre\d+)?$/;
+
+if (`git tag -l v$version` ne '') {
+    print "Tag v$version already exists.\n\nDelete tag or quit? [q/del] ";
+    $_ = <STDIN>;
+    exit 1 unless /^del/i;
+    system "git tag -d v$version";
+}
+
+if ($version =~ s/[-.]*pre[-.]*/pre/ && $confversion !~ /dev$/) {
+    $lastversion = $confversion;
+}
+
+print "Enter the previous version to produce a patch against: [$lastversion] ";
+chomp($_ = <STDIN>);
+$lastversion = $_ if $_ ne '';
+$lastversion =~ s/[-.]*pre[-.]*/pre/;
+
+my $pre = $version =~ /(pre\d+)/ ? $1 : '';
+
+my $release = $pre ? '0.1' : '1';
+print "Please enter the RPM release number of this release: [$release] ";
+chomp($_ = <STDIN>);
+$release = $_ if $_ ne '';
+$release .= ".$pre" if $pre;
+
+my($srcdir,$srcdiffdir,$lastsrcdir,$skipping);
+if ($lastversion =~ /pre/) {
+    if (!$pre) {
+	die "You should not diff a release version against a pre-release version.\n";
+    }
+    $srcdir = $srcdiffdir = $lastsrcdir = 'src-previews';
+    $skipping = ' ** SKIPPING **';
+} elsif ($pre) {
+    $srcdir = $srcdiffdir = 'src-previews';
+    $lastsrcdir = 'src';
+    $skipping = ' ** SKIPPING **';
+} else {
+    $srcdir = $lastsrcdir = 'src';
+    $srcdiffdir = 'src-diffs';
+    $skipping = '';
+}
+
+print "\n", $break, <<EOT;
+\$version is "$version"
+\$lastversion is "$lastversion"
+\$dest is "$dest"
+\$curdir is "$curdir"
+\$srcdir is "$srcdir"
+\$srcdiffdir is "$srcdiffdir"
+\$lastsrcdir is "$lastsrcdir"
+\$release is "$release"
+
+About to:
+    - make sure that SUBPROTOCOL_VERSION is 0$skipping
+    - tweak the version in configure.in and the spec files
+    - tweak NEWS and OLDNEWS to update the release date$skipping
+    - tweak the date in the *.yo files and generate the manpages
+    - generate configure.sh, config.h.in, and proto.h
+    - page through the differences
+
+EOT
+print "<Press Enter to continue> ";
+$_ = <STDIN>;
+
+(my $finalversion = $version) =~ s/pre\d+//;
+my %specvars = ( 'Version:' => $finalversion, 'Release:' => $release,
+		 '%define fullversion' => "\%{version}$pre", 'Released' => "$version.",
+		 '%define srcdir' => $srcdir );
+my @tweak_files = ( glob('packaging/*.spec'), glob('packaging/*/*.spec'), glob('*.yo'),
+		    qw( configure.in rsync.h NEWS OLDNEWS options.c ) );
+
+foreach my $fn (@tweak_files) {
+    open(IN, '<', $fn) or die $!;
+    undef $/; $_ = <IN>; $/ = "\n";
+    close IN;
+    if ($fn =~ /configure/) {
+	s/^RSYNC_VERSION=.*/RSYNC_VERSION=$version/m
+	    or die "Unable to update RSYNC_VERSION in $fn\n";
+    } elsif ($fn =~ /\.spec/) {
+	while (my($str, $val) = each %specvars) {
+	    s/^\Q$str\E .*/$str $val/m
+		or die "Unable to update $str in $fn\n";
+	}
+	s/^\* \w\w\w \w\w\w \d\d \d\d\d\d (.*)/$cl_today $1/m
+	    or die "Unable to update ChangeLog header in $fn\n";
+    } elsif ($fn =~ /\.yo/) {
+	s/^(manpage\([^)]+\)\(\d+\)\()[^)]+(\).*)/$1$today$2/m
+	    or die "Unable to update date in manpage() header in $fn\n";
+	s/^(This man ?page is current for version) \S+ (of rsync)/$1 $version $2/m
+	    or die "Unable to update current version info in $fn\n";
+    } elsif ($fn eq 'rsync.h') {
+	s/(#define\s+SUBPROTOCOL_VERSION)\s+\d+/$1 0/
+	    or die "Unable to find SUBPROTOCOL_VERSION define in $fn\n";
+	next if $pre;
+    } elsif ($fn eq 'NEWS') {
+	s/^(NEWS for rsync \Q$finalversion\E) \(UNRELEASED\)\s*\n/$1 ($today)\n/mi
+	    or die "The first line of $fn is not in the right format.  It must be:\n"
+		 . "NEWS for rsync $finalversion (UNRELEASED)\n";
+	next if $pre;
+    } elsif ($fn eq 'OLDNEWS') {
+	s/^\t\S\S\s\S\S\S\s\d\d\d\d(\t\Q$finalversion\E)/\t$ztoday$1/m
+	    or die "Unable to find \"?? ??? $year\t$finalversion\" line in $fn\n";
+	next if $pre;
+    } elsif ($fn eq 'options.c') {
+	if (s/(Copyright \(C\) 2002-)(\d+)( Wayne Davison)/$1$year$3/
+	 && $2 ne $year) {
+	    die "Copyright comments need to be updated to $year in all files!\n";
+	}
+	# Adjust the year in the --version output.
+	s/(rprintf\(f, "Copyright \(C\) 1996-)(\d+)/$1$year/
+	    or die "Unable to find Copyright string in --version output of $fn\n";
+	next if $2 eq $year;
+    } else {
+	die "Unrecognized file in \@tweak_files: $fn\n";
+    }
+    open(OUT, '>', $fn) or die $!;
+    print OUT $_;
+    close OUT;
+}
+
+print $break;
+system "git diff --color | less -p '^diff .*'";
+
+my $srctar_name = "rsync-$version.tar.gz";
+my $pattar_name = "rsync-patches-$version.tar.gz";
+my $diff_name = "rsync-$lastversion-$version.diffs.gz";
+my $srctar_file = "$dest/$srcdir/$srctar_name";
+my $pattar_file = "$dest/$srcdir/$pattar_name";
+my $diff_file = "$dest/$srcdiffdir/$diff_name";
+my $news_file = "$dest/$srcdir/rsync-$version-NEWS";
+my $lasttar_file = "$dest/$lastsrcdir/rsync-$lastversion.tar.gz";
+
+print $break, <<EOT;
+
+About to:
+    - commit all version changes
+    - merge the master branch into the patch/* branches
+    - update the files in the "patches" dir and OPTIONALLY
+      (if you type 'y') to launch a shell for each patch
+
+EOT
+print "<Press Enter OR 'y' to continue> ";
+my $ans = <STDIN>;
+
+system "git commit -a -m 'Preparing for release of $version'" and exit 1;
+
+print "Updating files in \"patches\" dir ...\n";
+system "support/patch-update";
+
+if ($ans =~ /^y/i) {
+    print "\nVisiting all \"patch/*\" branches ...\n";
+    system "support/patch-update --shell";
+}
+
+print $break, <<EOT;
+
+About to:
+    - create signed tag for this release: v$version
+    - create release diffs, "$diff_name"
+    - create release tar, "$srctar_name"
+    - generate rsync-$version/patches/* files
+    - create patches tar, "$pattar_name"
+    - update top-level README, *NEWS, TODO, and ChangeLog
+    - update top-level rsync*.html manpages
+    - gpg-sign the release files
+    - update hard-linked top-level release files$skipping
+
+EOT
+print "<Press Enter to continue> ";
+$_ = <STDIN>;
+
+my $passphrase;
+while (1) {
+    ReadMode('noecho');
+    print "\nEnter your GPG pass-phrase: ";
+    chomp($passphrase = <STDIN>);
+    ReadMode(0);
+    print "\n";
+
+    # Briefly create a temp file with the passphrase for git's tagging use.
+    my $oldmask = umask 077;
+    unlink($passfile);
+    open(OUT, '>', $passfile) or die $!;
+    print OUT $passphrase, "\n";
+    close OUT;
+    umask $oldmask;
+    $ENV{'GPG_PASSFILE'} = $passfile;
+
+    # We want to use our passphrase-providing "gpg" script, so modify the PATH.
+    $ENV{PATH} = "packaging/bin:$path";
+    $_ = `git tag -s -m 'Version $version.' v$version 2>&1`;
+    $ENV{PATH} = $path;
+    unlink($passfile);
+    print $_;
+    next if /bad passphrase/;
+    last unless /failed/;
+    exit 1;
+}
+
+# Extract the generated files from the old tar.
+@_ = @extra_files;
+map { s#^#rsync-$lastversion/# } @_;
+system "tar xzf $lasttar_file @_";
+rename("rsync-$lastversion", 'a');
+
+print "Creating $diff_file ...\n";
+system "./config.status Makefile; make gen; rsync -a @extra_files b/";
+my $sed_script = 's:^((---|\+\+\+) [ab]/[^\t]+)\t.*:\1:';
+system "(git diff v$lastversion v$version; diff -upN a b | sed -r '$sed_script') | gzip -9 >$diff_file";
+system "rm -rf a";
+rename('b', "rsync-$version");
+
+print "Creating $srctar_file ...\n";
+system "git archive --format=tar --prefix=rsync-$version/ v$version | tar xf -";
+system "support/git-set-file-times --prefix=rsync-$version/";
+system "fakeroot tar czf $srctar_file rsync-$version; rm -rf rsync-$version";
+
+print "Updating files in \"rsync-$version/patches\" dir ...\n";
+mkdir("rsync-$version", 0755);
+mkdir("rsync-$version/patches", 0755);
+system "support/patch-update --skip-check --gen=rsync-$version/patches";
+
+print "Creating $pattar_file ...\n";
+system "fakeroot tar chzf $pattar_file rsync-$version/patches; rm -rf rsync-$version";
+
+print "Updating the other files in $dest ...\n";
+system "rsync -a README NEWS OLDNEWS TODO $dest";
+unlink($news_file);
+link("$dest/NEWS", $news_file);
+system "git log --name-status | gzip -9 >$dest/ChangeLog.gz";
+
+system "yodl2html -o $dest/rsync.html rsync.yo";
+system "yodl2html -o $dest/rsyncd.conf.html rsyncd.conf.yo";
+
+foreach my $fn ($srctar_file, $pattar_file, $diff_file) {
+    unlink("$fn.asc");
+    open(GPG, '|-', "gpg --batch --passphrase-fd=0 -ba $fn") or die $!;
+    print GPG $passphrase, "\n";
+    close GPG;
+}
+
+if (!$pre) {
+    system "rm $dest/rsync-*{.tar.gz,.asc,-NEWS} $dest/src-preview/rsync-*diffs.gz";
+
+    foreach my $fn ($srctar_file, "$srctar_file.asc",
+		    $pattar_file, "$pattar_file.asc",
+		    $diff_file, "$diff_file.asc", $news_file) {
+	(my $top_fn = $fn) =~ s#/src(-\w+)?/#/#;
+	link($fn, $top_fn);
+    }
+}
+
+print $break, <<'EOT';
+
+Local changes are done.  When you're satisfied, push the git repository
+and rsync the release files.  Remember to announce the release on *BOTH*
+rsync-announce@lists.samba.org and rsync@lists.samba.org (and the web)!
+EOT

packaging/solaris/build_pkg.sh

@@ -0,0 +1,94 @@
+#!/bin/sh
+# Shell script for building Solaris package of rsync
+# Author: Jens Apel <jens.apel@web.de>
+# License: GPL
+#
+# BASEDIR is /usr/local and should be the same as the
+# --prefix parameter of configure
+#
+# this script should be copied under
+# packaging/solaris/5.8/build_pkg.sh
+
+# Definitions start here
+# you can edit this, if you like
+
+# The Package name under which rsync will b installed
+PKGNAME=SMBrsync
+
+# Extract common info requires for the 'info' part of the package.
+# This should be made generic and generated by the configure script
+# but for now it is hard coded
+BASEDIR=/usr/local
+VERSION="2.5.5"
+ARCH=`uname -p`
+NAME=rsync
+
+# Definitions end here
+# Please do not edit below this line or you know what you do.
+
+## Start by faking root install
+echo "Creating install directory (fake $BASEDIR)..."
+START=`pwd`
+FAKE_ROOT=$START/${PKGNAME}
+mkdir $FAKE_ROOT
+
+# copy the binary and the man page to their places
+mkdir $FAKE_ROOT/bin
+mkdir -p $FAKE_ROOT/doc/rsync
+mkdir -p $FAKE_ROOT/man/man1
+mkdir -p $FAKE_ROOT/man/man5
+
+cp ../../../rsync $FAKE_ROOT/bin/rsync
+cp ../../../rsync.1 $FAKE_ROOT/man/man1/rsync.1
+cp ../../../rsyncd.conf.5 $FAKE_ROOT/man/man5/rsyncd.conf.5
+cp ../../../README $FAKE_ROOT/doc/rsync/README
+cp ../../../COPYING $FAKE_ROOT/doc/rsync/COPYING
+cp ../../../tech_report.pdf $FAKE_ROOT/doc/rsync/tech_report.pdf
+cp ../../../COPYING $FAKE_ROOT/COPYING
+
+## Build info file
+echo "Building pkginfo file..."
+cat > $FAKE_ROOT/pkginfo << EOF_INFO
+PKG=$PKGNAME
+NAME=$NAME
+DESC="Program for efficient remote updates of files."
+VENDOR="Samba Team URL: http://samba.anu.edu.au/rsync/"
+BASEDIR=$BASEDIR
+ARCH=$ARCH
+VERSION=$VERSION
+CATEGORY=application
+CLASSES=none
+EOF_INFO
+
+## Build prototype file
+cat > $FAKE_ROOT/prototype << EOFPROTO
+i copyright=COPYING
+i pkginfo=pkginfo
+d none bin 0755 bin bin
+f none bin/rsync 0755 bin bin
+d none doc 0755 bin bin
+d none doc/$NAME 0755 bin bin
+f none doc/$NAME/README 0644 bin bin
+f none doc/$NAME/COPYING 0644 bin bin
+f none doc/$NAME/tech_report.pdf 0644 bin bin
+d none man 0755 bin bin
+d none man/man1 0755 bin bin
+f none man/man1/rsync.1 0644 bin bin
+d none man/man5 0755 bin bin
+f none man/man5/rsyncd.conf.5 0644 bin bin
+EOFPROTO
+
+## And now build the package.
+OUTPUTFILE=$PKGNAME-$VERSION-sol8-$ARCH-local.pkg
+echo "Building package.."
+echo FAKE_ROOT = $FAKE_ROOT
+cd $FAKE_ROOT
+pkgmk -d . -r . -f ./prototype -o
+pkgtrans -os . $OUTPUTFILE $PKGNAME
+
+mv $OUTPUTFILE ..
+cd ..
+
+# Comment this out if you want to see, which file structure has been created
+rm -rf $FAKE_ROOT
+

params.c

@@ -1,10 +1,10 @@
-/*
-  This modules is based on the params.c module from Samba, written by Karl Auer
-  and much modifed by Christopher Hertel.
+/* This modules is based on the params.c module from Samba, written by Karl Auer
+   and much modifed by Christopher Hertel. */
 
+/*
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
+ * the Free Software Foundation; either version 3 of the License, or
  * (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
@@ -12,11 +12,11 @@
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * -------------------------------------------------------------------------- **
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, visit the http://fsf.org website.
+ */
+
+/* -------------------------------------------------------------------------- **
  *
  * Module name: params
  *
@@ -74,6 +74,7 @@
  */
 
 #include "rsync.h"
+#include "ifuncs.h"
 
 /* -------------------------------------------------------------------------- **
  * Constants...
@@ -164,7 +165,7 @@ static int Continuation( char *line, int pos )
    */
   {
   pos--;
-  while( (pos >= 0) && isspace(line[pos]) )
+  while( pos >= 0 && isSpace(line + pos) )
      pos--;
 
   return( ((pos >= 0) && ('\\' == line[pos])) ? pos : -1 );
@@ -207,10 +208,10 @@ static BOOL Section( FILE *InFile, BOOL (*sfunc)(char *) )
     if( i > (bSize - 2) )
       {
       bSize += BUFR_INC;
-      bufr   = Realloc( bufr, bSize );
+      bufr   = realloc_array( bufr, char, bSize );
       if( NULL == bufr )
         {
-        rprintf(FERROR, "%s Memory re-allocation failure.", func);
+        rprintf(FLOG, "%s Memory re-allocation failure.", func);
         return( False );
         }
       }
@@ -222,7 +223,7 @@ static BOOL Section( FILE *InFile, BOOL (*sfunc)(char *) )
         bufr[end] = '\0';
         if( 0 == end )                  /* Don't allow an empty name.       */
           {
-          rprintf(FERROR, "%s Empty section name in configuration file.\n", func );
+          rprintf(FLOG, "%s Empty section name in configuration file.\n", func );
           return( False );
           }
         if( !sfunc( bufr ) )            /* Got a valid name.  Deal with it. */
@@ -235,7 +236,7 @@ static BOOL Section( FILE *InFile, BOOL (*sfunc)(char *) )
         if( i < 0 )
           {
           bufr[end] = '\0';
-          rprintf(FERROR, "%s Badly formed line in configuration file: %s\n",
+          rprintf(FLOG, "%s Badly formed line in configuration file: %s\n",
                    func, bufr );
           return( False );
           }
@@ -260,7 +261,7 @@ static BOOL Section( FILE *InFile, BOOL (*sfunc)(char *) )
     }
 
   /* We arrive here if we've met the EOF before the closing bracket. */
-  rprintf(FERROR, "%s Unexpected EOF in the configuration file: %s\n", func, bufr );
+  rprintf(FLOG, "%s Unexpected EOF in the configuration file: %s\n", func, bufr );
   return( False );
   } /* Section */
 
@@ -301,10 +302,10 @@ static BOOL Parameter( FILE *InFile, BOOL (*pfunc)(char *, char *), int c )
     if( i > (bSize - 2) )       /* Ensure there's space for next char.    */
       {
       bSize += BUFR_INC;
-      bufr   = Realloc( bufr, bSize );
+      bufr   = realloc_array( bufr, char, bSize );
       if( NULL == bufr )
         {
-        rprintf(FERROR, "%s Memory re-allocation failure.", func) ;
+        rprintf(FLOG, "%s Memory re-allocation failure.", func) ;
         return( False );
         }
       }
@@ -314,7 +315,7 @@ static BOOL Parameter( FILE *InFile, BOOL (*pfunc)(char *, char *), int c )
       case '=':                 /* Equal sign marks end of param name. */
         if( 0 == end )              /* Don't allow an empty name.      */
           {
-          rprintf(FERROR, "%s Invalid parameter name in config. file.\n", func );
+          rprintf(FLOG, "%s Invalid parameter name in config. file.\n", func );
           return( False );
           }
         bufr[end++] = '\0';         /* Mark end of string & advance.   */
@@ -328,7 +329,7 @@ static BOOL Parameter( FILE *InFile, BOOL (*pfunc)(char *, char *), int c )
         if( i < 0 )
           {
           bufr[end] = '\0';
-          rprintf(FERROR, "%s Ignoring badly formed line in configuration file: %s\n",
+          rprintf(FLOG, "%s Ignoring badly formed line in configuration file: %s\n",
                    func, bufr );
           return( True );
           }
@@ -339,7 +340,7 @@ static BOOL Parameter( FILE *InFile, BOOL (*pfunc)(char *, char *), int c )
       case '\0':                /* Shouldn't have EOF within param name. */
       case EOF:
         bufr[i] = '\0';
-        rprintf(FERROR, "%s Unexpected end-of-file at: %s\n", func, bufr );
+        rprintf(FLOG, "%s Unexpected end-of-file at: %s\n", func, bufr );
         return( True );
 
       default:
@@ -366,10 +367,10 @@ static BOOL Parameter( FILE *InFile, BOOL (*pfunc)(char *, char *), int c )
     if( i > (bSize - 2) )       /* Make sure there's enough room. */
       {
       bSize += BUFR_INC;
-      bufr   = Realloc( bufr, bSize );
+      bufr   = realloc_array( bufr, char, bSize );
       if( NULL == bufr )
         {
-        rprintf(FERROR, "%s Memory re-allocation failure.", func) ;
+        rprintf(FLOG, "%s Memory re-allocation failure.", func) ;
         return( False );
         }
       }
@@ -386,7 +387,7 @@ static BOOL Parameter( FILE *InFile, BOOL (*pfunc)(char *, char *), int c )
           c = 0;
         else
           {
-          for( end = i; (end >= 0) && isspace(bufr[end]); end-- )
+          for( end = i; end >= 0 && isSpace(bufr + end); end-- )
             ;
           c = getc( InFile );
           }
@@ -484,15 +485,15 @@ static FILE *OpenConfFile( char *FileName )
 
   if( NULL == FileName || 0 == *FileName )
     {
-    rprintf(FERROR,"%s No configuration filename specified.\n", func);
+    rprintf(FLOG, "%s No configuration filename specified.\n", func);
     return( NULL );
     }
 
   OpenedFile = fopen( FileName, "r" );
   if( NULL == OpenedFile )
     {
-    rprintf(FERROR,"%s Unable to open configuration file \"%s\":\n\t%s\n",
-	    func, FileName, strerror(errno));
+    rsyserr(FLOG, errno, "unable to open configuration file \"%s\"",
+	    FileName);
     }
 
   return( OpenedFile );
@@ -530,10 +531,10 @@ BOOL pm_process( char *FileName,
   else                                        /* If we don't have a buffer   */
     {                                         /* allocate one, then parse,   */
     bSize = BUFR_INC;                         /* then free.                  */
-    bufr = (char *)malloc( bSize );
+    bufr = new_array( char, bSize );
     if( NULL == bufr )
       {
-      rprintf(FERROR,"%s memory allocation failure.\n", func);
+      rprintf(FLOG, "%s memory allocation failure.\n", func);
       fclose(InFile);
       return( False );
       }
@@ -547,7 +548,7 @@ BOOL pm_process( char *FileName,
 
   if( !result )                               /* Generic failure. */
     {
-    rprintf(FERROR,"%s Failed.  Error returned from params.c:parse().\n", func);
+    rprintf(FLOG, "%s Failed.  Error returned from params.c:parse().\n", func);
     return( False );
     }
 

pipe.c

@@ -0,0 +1,169 @@
+/*
+ * Routines used to setup various kinds of inter-process pipes.
+ *
+ * Copyright (C) 1996-2000 Andrew Tridgell
+ * Copyright (C) 1996 Paul Mackerras
+ * Copyright (C) 2001, 2002 Martin Pool <mbp@samba.org>
+ * Copyright (C) 2004-2008 Wayne Davison
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, visit the http://fsf.org website.
+ */
+
+#include "rsync.h"
+
+extern int am_sender;
+extern int am_server;
+extern int blocking_io;
+extern int filesfrom_fd;
+extern mode_t orig_umask;
+extern char *logfile_name;
+extern struct chmod_mode_struct *chmod_modes;
+
+/**
+ * Create a child connected to us via its stdin/stdout.
+ *
+ * This is derived from CVS code
+ *
+ * Note that in the child STDIN is set to blocking and STDOUT
+ * is set to non-blocking. This is necessary as rsh relies on stdin being blocking
+ *  and ssh relies on stdout being non-blocking
+ *
+ * If blocking_io is set then use blocking io on both fds. That can be
+ * used to cope with badly broken rsh implementations like the one on
+ * Solaris.
+ **/
+pid_t piped_child(char **command, int *f_in, int *f_out)
+{
+	pid_t pid;
+	int to_child_pipe[2];
+	int from_child_pipe[2];
+
+	if (verbose >= 2)
+		print_child_argv("opening connection using:", command);
+
+	if (fd_pair(to_child_pipe) < 0 || fd_pair(from_child_pipe) < 0) {
+		rsyserr(FERROR, errno, "pipe");
+		exit_cleanup(RERR_IPC);
+	}
+
+	pid = do_fork();
+	if (pid == -1) {
+		rsyserr(FERROR, errno, "fork");
+		exit_cleanup(RERR_IPC);
+	}
+
+	if (pid == 0) {
+		if (dup2(to_child_pipe[0], STDIN_FILENO) < 0 ||
+		    close(to_child_pipe[1]) < 0 ||
+		    close(from_child_pipe[0]) < 0 ||
+		    dup2(from_child_pipe[1], STDOUT_FILENO) < 0) {
+			rsyserr(FERROR, errno, "Failed to dup/close");
+			exit_cleanup(RERR_IPC);
+		}
+		if (to_child_pipe[0] != STDIN_FILENO)
+			close(to_child_pipe[0]);
+		if (from_child_pipe[1] != STDOUT_FILENO)
+			close(from_child_pipe[1]);
+		umask(orig_umask);
+		set_blocking(STDIN_FILENO);
+		if (blocking_io > 0)
+			set_blocking(STDOUT_FILENO);
+		execvp(command[0], command);
+		rsyserr(FERROR, errno, "Failed to exec %s", command[0]);
+		exit_cleanup(RERR_IPC);
+	}
+
+	if (close(from_child_pipe[1]) < 0 || close(to_child_pipe[0]) < 0) {
+		rsyserr(FERROR, errno, "Failed to close");
+		exit_cleanup(RERR_IPC);
+	}
+
+	*f_in = from_child_pipe[0];
+	*f_out = to_child_pipe[1];
+
+	return pid;
+}
+
+/* This function forks a child which calls child_main().  First,
+ * however, it has to establish communication paths to and from the
+ * newborn child.  It creates two socket pairs -- one for writing to
+ * the child (from the parent) and one for reading from the child
+ * (writing to the parent).  Since that's four socket ends, each
+ * process has to close the two ends it doesn't need.  The remaining
+ * two socket ends are retained for reading and writing.  In the
+ * child, the STDIN and STDOUT file descriptors refer to these
+ * sockets.  In the parent, the function arguments f_in and f_out are
+ * set to refer to these sockets. */
+pid_t local_child(int argc, char **argv, int *f_in, int *f_out,
+		  int (*child_main)(int, char*[]))
+{
+	pid_t pid;
+	int to_child_pipe[2];
+	int from_child_pipe[2];
+
+	/* The parent process is always the sender for a local rsync. */
+	assert(am_sender);
+
+	if (fd_pair(to_child_pipe) < 0 ||
+	    fd_pair(from_child_pipe) < 0) {
+		rsyserr(FERROR, errno, "pipe");
+		exit_cleanup(RERR_IPC);
+	}
+
+	pid = do_fork();
+	if (pid == -1) {
+		rsyserr(FERROR, errno, "fork");
+		exit_cleanup(RERR_IPC);
+	}
+
+	if (pid == 0) {
+		am_sender = 0;
+		am_server = 1;
+		filesfrom_fd = -1;
+		chmod_modes = NULL; /* Let the sending side handle this. */
+
+		/* Let the client side handle this. */
+		if (logfile_name) {
+			logfile_name = NULL;
+			logfile_close();
+		}
+
+		if (dup2(to_child_pipe[0], STDIN_FILENO) < 0 ||
+		    close(to_child_pipe[1]) < 0 ||
+		    close(from_child_pipe[0]) < 0 ||
+		    dup2(from_child_pipe[1], STDOUT_FILENO) < 0) {
+			rsyserr(FERROR, errno, "Failed to dup/close");
+			exit_cleanup(RERR_IPC);
+		}
+		if (to_child_pipe[0] != STDIN_FILENO)
+			close(to_child_pipe[0]);
+		if (from_child_pipe[1] != STDOUT_FILENO)
+			close(from_child_pipe[1]);
+#ifdef ICONV_CONST
+		setup_iconv();
+#endif
+		child_main(argc, argv);
+	}
+
+	if (close(from_child_pipe[1]) < 0 ||
+	    close(to_child_pipe[0]) < 0) {
+		rsyserr(FERROR, errno, "Failed to close");
+		exit_cleanup(RERR_IPC);
+	}
+
+	*f_in = from_child_pipe[0];
+	*f_out = to_child_pipe[1];
+
+	return pid;
+}

popt/CHANGES

@@ -0,0 +1,46 @@
+1.5 -> 1.6
+	- add ability to perform callbacks for every, not just first, match.
+
+1.3 -> 1.5
+	- heavy dose of const's
+	- poptParseArgvString() now NULL terminates the list
+
+1.2.3 -> 1.3
+	- added support for single -
+	- misc bug fixes
+	- portability improvements
+
+1.2.2 -> 1.2.3
+	- fixed memset() in help message generation (Dale Hawkins)
+	- added extern "C" stuff to popt.h for C++ compilers (Dale Hawkins)
+	- const'ified poptParseArgvString (Jeff Garzik)
+
+1.2.1 -> 1.2.2
+	- fixed bug in chaind alias happens which seems to have only
+	  affected --triggers in rpm
+	- added POPT_ARG_VAL
+	- popt.3 installed by default
+
+1.2 -> 1.2.1
+	- added POPT_ARG_INTL_DOMAIN (Elliot Lee)
+	- updated Makefile's to be more GNUish (Elliot Lee)
+
+1.1 -> 1.2
+	- added popt.3 man page (Robert Lynch)
+	- don't use mmap anymore (its lack of portability isn't worth the
+	  trouble)
+	- added test script
+	- added support for exec
+	- removed support for *_POPT_ALIASES env variable -- it was a bad
+	  idea
+	- reorganized into multiple source files
+	- added automatic help generation, POPT_AUTOHELP
+	- added table callbacks
+	- added table inclusion
+	- updated man page for new features
+	- added test scripts
+
+1.0 -> 1.1
+	- moved to autoconf (Fred Fish)
+	- added STRERROR replacement (Norbert Warmuth)
+	- added const keywords (Bruce Perens)

popt/COPYING

@@ -0,0 +1,22 @@
+Copyright (c) 1998  Red Hat Software
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
+X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+Except as contained in this notice, the name of the X Consortium shall not be
+used in advertising or otherwise to promote the sale, use or other dealings
+in this Software without prior written authorization from the X Consortium.

popt/README

@@ -0,0 +1,18 @@
+This is the popt command line option parsing library. While it is similiar
+to getopt(3), it contains a number of enhancements, including:
+
+	1) popt is fully reentrant
+	2) popt can parse arbitrary argv[] style arrays while 
+	   getopt(2) makes this quite difficult
+	3) popt allows users to alias command line arguments
+	4) popt provides convience functions for parsing strings
+	   into argv[] style arrays
+
+popt is used by rpm, the Red Hat install program, and many other Red Hat
+utilities, all of which provide excellent examples of how to use popt. 
+Complete documentation on popt is available in popt.ps (included in this
+tarball), which is excerpted with permission from the book "Linux
+Application Development" by Michael K. Johnson and Erik Troan (availble
+from Addison Wesley in May, 1998).
+
+Comments on popt should be addressed to ewt@redhat.com.

popt/README.rsync

@@ -0,0 +1,4 @@
+This is a perfectly ordinary copy of libpopt.  It is only used on platforms
+that do not have a sufficiently up-to-date copy of their own.  If you build
+rsync on a platform which has popt, this directory should not be used.  (You
+can control that using the --with-included-popt configure flag.)

popt/findme.c

@@ -0,0 +1,55 @@
+/** \ingroup popt
+ * \file popt/findme.c
+ */
+
+/* (C) 1998-2002 Red Hat, Inc. -- Licensing details are in the COPYING
+   file accompanying popt source distributions, available from 
+   ftp://ftp.rpm.org/pub/rpm/dist. */
+
+#include "system.h"
+#include "findme.h"
+
+const char * findProgramPath(const char * argv0)
+{
+    char * path = getenv("PATH");
+    char * pathbuf;
+    char * start, * chptr;
+    char * buf;
+    size_t bufsize;
+
+    if (argv0 == NULL) return NULL;	/* XXX can't happen */
+    /* If there is a / in the argv[0], it has to be an absolute path */
+    if (strchr(argv0, '/'))
+	return xstrdup(argv0);
+
+    if (path == NULL) return NULL;
+
+    bufsize = strlen(path) + 1;
+    start = pathbuf = alloca(bufsize);
+    if (pathbuf == NULL) return NULL;	/* XXX can't happen */
+    strlcpy(pathbuf, path, bufsize);
+    bufsize += sizeof "/" - 1 + strlen(argv0);
+    buf = malloc(bufsize);
+    if (buf == NULL) return NULL;	/* XXX can't happen */
+
+    chptr = NULL;
+    /*@-branchstate@*/
+    do {
+	if ((chptr = strchr(start, ':')))
+	    *chptr = '\0';
+	snprintf(buf, bufsize, "%s/%s", start, argv0);
+
+	if (!access(buf, X_OK))
+	    return buf;
+
+	if (chptr) 
+	    start = chptr + 1;
+	else
+	    start = NULL;
+    } while (start && *start);
+    /*@=branchstate@*/
+
+    free(buf);
+
+    return NULL;
+}

popt/findme.h

@@ -0,0 +1,20 @@
+/** \ingroup popt
+ * \file popt/findme.h
+ */
+
+/* (C) 1998-2000 Red Hat, Inc. -- Licensing details are in the COPYING
+   file accompanying popt source distributions, available from 
+   ftp://ftp.rpm.org/pub/rpm/dist. */
+
+#ifndef H_FINDME
+#define H_FINDME
+
+/**
+ * Return absolute path to executable by searching PATH.
+ * @param argv0		name of executable
+ * @return		(malloc'd) absolute path to executable (or NULL)
+ */
+/*@null@*/ const char * findProgramPath(/*@null@*/ const char * argv0)
+	/*@*/;
+
+#endif

popt/popt.h

@@ -0,0 +1,564 @@
+/** \file popt/popt.h
+ * \ingroup popt
+ */
+
+/* (C) 1998-2000 Red Hat, Inc. -- Licensing details are in the COPYING
+   file accompanying popt source distributions, available from 
+   ftp://ftp.rpm.org/pub/rpm/dist. */
+
+#ifndef H_POPT
+#define H_POPT
+
+#include <stdio.h>			/* for FILE * */
+
+#define POPT_OPTION_DEPTH	10
+
+/** \ingroup popt
+ * \name Arg type identifiers
+ */
+/*@{*/
+#define POPT_ARG_NONE		0	/*!< no arg */
+#define POPT_ARG_STRING		1	/*!< arg will be saved as string */
+#define POPT_ARG_INT		2	/*!< arg will be converted to int */
+#define POPT_ARG_LONG		3	/*!< arg will be converted to long */
+#define POPT_ARG_INCLUDE_TABLE	4	/*!< arg points to table */
+#define POPT_ARG_CALLBACK	5	/*!< table-wide callback... must be
+					   set first in table; arg points 
+					   to callback, descrip points to 
+					   callback data to pass */
+#define POPT_ARG_INTL_DOMAIN    6       /*!< set the translation domain
+					   for this table and any
+					   included tables; arg points
+					   to the domain string */
+#define POPT_ARG_VAL		7	/*!< arg should take value val */
+#define	POPT_ARG_FLOAT		8	/*!< arg will be converted to float */
+#define	POPT_ARG_DOUBLE		9	/*!< arg will be converted to double */
+
+#define POPT_ARG_MASK		0x0000FFFF
+/*@}*/
+
+/** \ingroup popt
+ * \name Arg modifiers
+ */
+/*@{*/
+#define POPT_ARGFLAG_ONEDASH	0x80000000  /*!< allow -longoption */
+#define POPT_ARGFLAG_DOC_HIDDEN 0x40000000  /*!< don't show in help/usage */
+#define POPT_ARGFLAG_STRIP	0x20000000  /*!< strip this arg from argv(only applies to long args) */
+#define	POPT_ARGFLAG_OPTIONAL	0x10000000  /*!< arg may be missing */
+
+#define	POPT_ARGFLAG_OR		0x08000000  /*!< arg will be or'ed */
+#define	POPT_ARGFLAG_NOR	0x09000000  /*!< arg will be nor'ed */
+#define	POPT_ARGFLAG_AND	0x04000000  /*!< arg will be and'ed */
+#define	POPT_ARGFLAG_NAND	0x05000000  /*!< arg will be nand'ed */
+#define	POPT_ARGFLAG_XOR	0x02000000  /*!< arg will be xor'ed */
+#define	POPT_ARGFLAG_NOT	0x01000000  /*!< arg will be negated */
+#define POPT_ARGFLAG_LOGICALOPS \
+        (POPT_ARGFLAG_OR|POPT_ARGFLAG_AND|POPT_ARGFLAG_XOR)
+
+#define	POPT_BIT_SET	(POPT_ARG_VAL|POPT_ARGFLAG_OR)
+					/*!< set arg bit(s) */
+#define	POPT_BIT_CLR	(POPT_ARG_VAL|POPT_ARGFLAG_NAND)
+					/*!< clear arg bit(s) */
+
+#define	POPT_ARGFLAG_SHOW_DEFAULT 0x00800000 /*!< show default value in --help */
+
+/*@}*/
+
+/** \ingroup popt
+ * \name Callback modifiers
+ */
+/*@{*/
+#define POPT_CBFLAG_PRE		0x80000000  /*!< call the callback before parse */
+#define POPT_CBFLAG_POST	0x40000000  /*!< call the callback after parse */
+#define POPT_CBFLAG_INC_DATA	0x20000000  /*!< use data from the include line,
+					       not the subtable */
+#define POPT_CBFLAG_SKIPOPTION	0x10000000  /*!< don't callback with option */
+#define POPT_CBFLAG_CONTINUE	0x08000000  /*!< continue callbacks with option */
+/*@}*/
+
+/** \ingroup popt
+ * \name Error return values
+ */
+/*@{*/
+#define POPT_ERROR_NOARG	-10	/*!< missing argument */
+#define POPT_ERROR_BADOPT	-11	/*!< unknown option */
+#define POPT_ERROR_OPTSTOODEEP	-13	/*!< aliases nested too deeply */
+#define POPT_ERROR_BADQUOTE	-15	/*!< error in paramter quoting */
+#define POPT_ERROR_ERRNO	-16	/*!< errno set, use strerror(errno) */
+#define POPT_ERROR_BADNUMBER	-17	/*!< invalid numeric value */
+#define POPT_ERROR_OVERFLOW	-18	/*!< number too large or too small */
+#define	POPT_ERROR_BADOPERATION	-19	/*!< mutually exclusive logical operations requested */
+#define	POPT_ERROR_NULLARG	-20	/*!< opt->arg should not be NULL */
+#define	POPT_ERROR_MALLOC	-21	/*!< memory allocation failed */
+/*@}*/
+
+/** \ingroup popt
+ * \name poptBadOption() flags
+ */
+/*@{*/
+#define POPT_BADOPTION_NOALIAS  (1 << 0)  /*!< don't go into an alias */
+/*@}*/
+
+/** \ingroup popt
+ * \name poptGetContext() flags
+ */
+/*@{*/
+#define POPT_CONTEXT_NO_EXEC	(1 << 0)  /*!< ignore exec expansions */
+#define POPT_CONTEXT_KEEP_FIRST	(1 << 1)  /*!< pay attention to argv[0] */
+#define POPT_CONTEXT_POSIXMEHARDER (1 << 2) /*!< options can't follow args */
+#define POPT_CONTEXT_ARG_OPTS	(1 << 4) /*!< return args as options with value 0 */
+/*@}*/
+
+/** \ingroup popt
+ */
+struct poptOption {
+/*@observer@*/ /*@null@*/
+    const char * longName;	/*!< may be NULL */
+    char shortName;		/*!< may be NUL */
+    int argInfo;
+/*@shared@*/ /*@null@*/
+    void * arg;			/*!< depends on argInfo */
+    int val;			/*!< 0 means don't return, just update flag */
+/*@observer@*/ /*@null@*/
+    const char * descrip;	/*!< description for autohelp -- may be NULL */
+/*@observer@*/ /*@null@*/
+    const char * argDescrip;	/*!< argument description for autohelp */
+};
+
+/** \ingroup popt
+ * A popt alias argument for poptAddAlias().
+ */
+struct poptAlias {
+/*@owned@*/ /*@null@*/
+    const char * longName;	/*!< may be NULL */
+    char shortName;		/*!< may be NUL */
+    int argc;
+/*@owned@*/
+    const char ** argv;		/*!< must be free()able */
+};
+
+/** \ingroup popt
+ * A popt alias or exec argument for poptAddItem().
+ */
+/*@-exporttype@*/
+typedef struct poptItem_s {
+    struct poptOption option;	/*!< alias/exec name(s) and description. */
+    int argc;			/*!< (alias) no. of args. */
+/*@owned@*/
+    const char ** argv;		/*!< (alias) args, must be free()able. */
+} * poptItem;
+/*@=exporttype@*/
+
+/** \ingroup popt
+ * \name Auto-generated help/usage
+ */
+/*@{*/
+
+/**
+ * Empty table marker to enable displaying popt alias/exec options.
+ */
+/*@-exportvar@*/
+/*@unchecked@*/ /*@observer@*/
+extern struct poptOption poptAliasOptions[];
+/*@=exportvar@*/
+#define POPT_AUTOALIAS { NULL, '\0', POPT_ARG_INCLUDE_TABLE, poptAliasOptions, \
+			0, "Options implemented via popt alias/exec:", NULL },
+
+/**
+ * Auto help table options.
+ */
+/*@-exportvar@*/
+/*@unchecked@*/ /*@observer@*/
+extern struct poptOption poptHelpOptions[];
+/*@=exportvar@*/
+
+/*@-exportvar@*/
+/*@unchecked@*/ /*@observer@*/
+extern struct poptOption * poptHelpOptionsI18N;
+/*@=exportvar@*/
+
+#define POPT_AUTOHELP { NULL, '\0', POPT_ARG_INCLUDE_TABLE, poptHelpOptions, \
+			0, "Help options:", NULL },
+
+#define POPT_TABLEEND { NULL, '\0', 0, 0, 0, NULL, NULL }
+/*@}*/
+
+/** \ingroup popt
+ */
+/*@-exporttype@*/
+typedef /*@abstract@*/ struct poptContext_s * poptContext;
+/*@=exporttype@*/
+
+/** \ingroup popt
+ */
+#ifndef __cplusplus
+/*@-exporttype -typeuse@*/
+typedef struct poptOption * poptOption;
+/*@=exporttype =typeuse@*/
+#endif
+
+/*@-exportconst@*/
+enum poptCallbackReason {
+    POPT_CALLBACK_REASON_PRE	= 0, 
+    POPT_CALLBACK_REASON_POST	= 1,
+    POPT_CALLBACK_REASON_OPTION = 2
+};
+/*@=exportconst@*/
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+/*@-type@*/
+
+/** \ingroup popt
+ * Table callback prototype.
+ * @param con		context
+ * @param reason	reason for callback
+ * @param opt		option that triggered callback
+ * @param arg		@todo Document.
+ * @param data		@todo Document.
+ */
+typedef void (*poptCallbackType) (poptContext con, 
+		enum poptCallbackReason reason,
+		/*@null@*/ const struct poptOption * opt,
+		/*@null@*/ const char * arg,
+		/*@null@*/ const void * data)
+	/*@globals internalState @*/
+	/*@modifies internalState @*/;
+
+/** \ingroup popt
+ * Initialize popt context.
+ * @param name		context name (usually argv[0] program name)
+ * @param argc		no. of arguments
+ * @param argv		argument array
+ * @param options	address of popt option table
+ * @param flags		or'd POPT_CONTEXT_* bits
+ * @return		initialized popt context
+ */
+/*@only@*/ /*@null@*/
+poptContext poptGetContext(
+		/*@dependent@*/ /*@keep@*/ const char * name,
+		int argc, /*@dependent@*/ /*@keep@*/ const char ** argv,
+		/*@dependent@*/ /*@keep@*/ const struct poptOption * options,
+		int flags)
+	/*@*/;
+
+/** \ingroup popt
+ * Reinitialize popt context.
+ * @param con		context
+ */
+/*@unused@*/
+void poptResetContext(/*@null@*/poptContext con)
+	/*@modifies con @*/;
+
+/** \ingroup popt
+ * Return value of next option found.
+ * @param con		context
+ * @return		next option val, -1 on last item, POPT_ERROR_* on error
+ */
+int poptGetNextOpt(/*@null@*/poptContext con)
+	/*@globals fileSystem, internalState @*/
+	/*@modifies con, fileSystem, internalState @*/;
+
+/** \ingroup popt
+ * Return next option argument (if any).
+ * @param con		context
+ * @return		option argument, NULL if no argument is available
+ */
+/*@observer@*/ /*@null@*/ /*@unused@*/
+const char * poptGetOptArg(/*@null@*/poptContext con)
+	/*@modifies con @*/;
+
+/** \ingroup popt
+ * Return next argument.
+ * @param con		context
+ * @return		next argument, NULL if no argument is available
+ */
+/*@observer@*/ /*@null@*/ /*@unused@*/
+const char * poptGetArg(/*@null@*/poptContext con)
+	/*@modifies con @*/;
+
+/** \ingroup popt
+ * Peek at current argument.
+ * @param con		context
+ * @return		current argument, NULL if no argument is available
+ */
+/*@observer@*/ /*@null@*/ /*@unused@*/
+const char * poptPeekArg(/*@null@*/poptContext con)
+	/*@*/;
+
+/** \ingroup popt
+ * Return remaining arguments.
+ * @param con		context
+ * @return		argument array, NULL terminated
+ */
+/*@observer@*/ /*@null@*/
+const char ** poptGetArgs(/*@null@*/poptContext con)
+	/*@modifies con @*/;
+
+/** \ingroup popt
+ * Return the option which caused the most recent error.
+ * @param con		context
+ * @param flags
+ * @return		offending option
+ */
+/*@observer@*/
+const char * poptBadOption(/*@null@*/poptContext con, int flags)
+	/*@*/;
+
+/** \ingroup popt
+ * Destroy context.
+ * @param con		context
+ * @return		NULL always
+ */
+/*@null@*/
+poptContext poptFreeContext( /*@only@*/ /*@null@*/ poptContext con)
+	/*@modifies con @*/;
+
+/** \ingroup popt
+ * Add arguments to context.
+ * @param con		context
+ * @param argv		argument array, NULL terminated
+ * @return		0 on success, POPT_ERROR_OPTSTOODEEP on failure
+ */
+/*@unused@*/
+int poptStuffArgs(poptContext con, /*@keep@*/ const char ** argv)
+	/*@modifies con @*/;
+
+/** \ingroup popt
+ * Add alias to context.
+ * @todo Pass alias by reference, not value.
+ * @deprecated Use poptAddItem instead.
+ * @param con		context
+ * @param alias		alias to add
+ * @param flags		(unused)
+ * @return		0 on success
+ */
+/*@unused@*/
+int poptAddAlias(poptContext con, struct poptAlias alias, int flags)
+	/*@modifies con @*/;
+
+/** \ingroup popt
+ * Add alias/exec item to context.
+ * @param con		context
+ * @param newItem	alias/exec item to add
+ * @param flags		0 for alias, 1 for exec
+ * @return		0 on success
+ */
+int poptAddItem(poptContext con, poptItem newItem, int flags)
+	/*@modifies con @*/;
+
+/** \ingroup popt
+ * Read configuration file.
+ * @param con		context
+ * @param fn		file name to read
+ * @return		0 on success, POPT_ERROR_ERRNO on failure
+ */
+int poptReadConfigFile(poptContext con, const char * fn)
+	/*@globals errno, fileSystem, internalState @*/
+	/*@modifies con->execs, con->numExecs,
+		errno, fileSystem, internalState @*/;
+
+/** \ingroup popt
+ * Read default configuration from /etc/popt and $HOME/.popt.
+ * @param con		context
+ * @param useEnv	(unused)
+ * @return		0 on success, POPT_ERROR_ERRNO on failure
+ */
+/*@unused@*/
+int poptReadDefaultConfig(poptContext con, /*@unused@*/ int useEnv)
+	/*@globals fileSystem, internalState @*/
+	/*@modifies con->execs, con->numExecs,
+		fileSystem, internalState @*/;
+
+/** \ingroup popt
+ * Duplicate an argument array.
+ * @note: The argument array is malloc'd as a single area, so only argv must
+ * be free'd.
+ *
+ * @param argc		no. of arguments
+ * @param argv		argument array
+ * @retval argcPtr	address of returned no. of arguments
+ * @retval argvPtr	address of returned argument array
+ * @return		0 on success, POPT_ERROR_NOARG on failure
+ */
+int poptDupArgv(int argc, /*@null@*/ const char **argv,
+		/*@null@*/ /*@out@*/ int * argcPtr,
+		/*@null@*/ /*@out@*/ const char *** argvPtr)
+	/*@modifies *argcPtr, *argvPtr @*/;
+
+/** \ingroup popt
+ * Parse a string into an argument array.
+ * The parse allows ', ", and \ quoting, but ' is treated the same as " and
+ * both may include \ quotes.
+ * @note: The argument array is malloc'd as a single area, so only argv must
+ * be free'd.
+ *
+ * @param s		string to parse
+ * @retval argcPtr	address of returned no. of arguments
+ * @retval argvPtr	address of returned argument array
+ */
+int poptParseArgvString(const char * s,
+		/*@out@*/ int * argcPtr, /*@out@*/ const char *** argvPtr)
+	/*@modifies *argcPtr, *argvPtr @*/;
+
+/** \ingroup popt
+ * Parses an input configuration file and returns an string that is a 
+ * command line.  For use with popt.  You must free the return value when done.
+ *
+ * Given the file:
+\verbatim
+# this line is ignored
+    #   this one too
+aaa
+  bbb
+    ccc   
+bla=bla
+
+this_is   =   fdsafdas
+     bad_line=        
+  reall bad line  
+  reall bad line  = again
+5555=   55555   
+  test = with lots of spaces
+\endverbatim
+*
+* The result is:
+\verbatim
+--aaa --bbb --ccc --bla="bla" --this_is="fdsafdas" --5555="55555" --test="with lots of spaces"
+\endverbatim
+*
+* Passing this to poptParseArgvString() yields an argv of:
+\verbatim
+'--aaa'
+'--bbb' 
+'--ccc' 
+'--bla=bla' 
+'--this_is=fdsafdas' 
+'--5555=55555' 
+'--test=with lots of spaces' 
+\endverbatim
+ *
+ * @bug NULL is returned if file line is too long.
+ * @bug Silently ignores invalid lines.
+ *
+ * @param fp		file handle to read
+ * @param *argstrp	return string of options (malloc'd)
+ * @param flags		unused
+ * @return		0 on success
+ * @see			poptParseArgvString
+ */
+/*@-fcnuse@*/
+int poptConfigFileToString(FILE *fp, /*@out@*/ char ** argstrp, int flags)
+	/*@globals fileSystem @*/
+	/*@modifies *fp, *argstrp, fileSystem @*/;
+/*@=fcnuse@*/
+
+/** \ingroup popt
+ * Return formatted error string for popt failure.
+ * @param error		popt error
+ * @return		error string
+ */
+/*@observer@*/
+const char * poptStrerror(const int error)
+	/*@*/;
+
+/** \ingroup popt
+ * Limit search for executables.
+ * @param con		context
+ * @param path		single path to search for executables
+ * @param allowAbsolute	absolute paths only?
+ */
+/*@unused@*/
+void poptSetExecPath(poptContext con, const char * path, int allowAbsolute)
+	/*@modifies con @*/;
+
+/** \ingroup popt
+ * Print detailed description of options.
+ * @param con		context
+ * @param fp		ouput file handle
+ * @param flags		(unused)
+ */
+void poptPrintHelp(poptContext con, FILE * fp, /*@unused@*/ int flags)
+	/*@globals fileSystem @*/
+	/*@modifies *fp, fileSystem @*/;
+
+/** \ingroup popt
+ * Print terse description of options.
+ * @param con		context
+ * @param fp		ouput file handle
+ * @param flags		(unused)
+ */
+void poptPrintUsage(poptContext con, FILE * fp, /*@unused@*/ int flags)
+	/*@globals fileSystem @*/
+	/*@modifies *fp, fileSystem @*/;
+
+/** \ingroup popt
+ * Provide text to replace default "[OPTION...]" in help/usage output.
+ * @param con		context
+ * @param text		replacement text
+ */
+/*@-fcnuse@*/
+void poptSetOtherOptionHelp(poptContext con, const char * text)
+	/*@modifies con @*/;
+/*@=fcnuse@*/
+
+/** \ingroup popt
+ * Return argv[0] from context.
+ * @param con		context
+ * @return		argv[0]
+ */
+/*@-fcnuse@*/
+/*@observer@*/
+const char * poptGetInvocationName(poptContext con)
+	/*@*/;
+/*@=fcnuse@*/
+
+/** \ingroup popt
+ * Shuffle argv pointers to remove stripped args, returns new argc.
+ * @param con		context
+ * @param argc		no. of args
+ * @param argv		arg vector
+ * @return		new argc
+ */
+/*@-fcnuse@*/
+int poptStrippedArgv(poptContext con, int argc, char ** argv)
+	/*@modifies *argv @*/;
+/*@=fcnuse@*/
+
+/**
+ * Save a long, performing logical operation with value.
+ * @warning Alignment check may be too strict on certain platorms.
+ * @param arg		integer pointer, aligned on int boundary.
+ * @param argInfo	logical operation (see POPT_ARGFLAG_*)
+ * @param aLong		value to use
+ * @return		0 on success, POPT_ERROR_NULLARG/POPT_ERROR_BADOPERATION
+ */
+/*@-incondefs@*/
+/*@unused@*/
+int poptSaveLong(/*@null@*/ long * arg, int argInfo, long aLong)
+	/*@modifies *arg @*/
+	/*@requires maxSet(arg) >= 0 /\ maxRead(arg) == 0 @*/;
+/*@=incondefs@*/
+
+/**
+ * Save an integer, performing logical operation with value.
+ * @warning Alignment check may be too strict on certain platorms.
+ * @param arg		integer pointer, aligned on int boundary.
+ * @param argInfo	logical operation (see POPT_ARGFLAG_*)
+ * @param aLong		value to use
+ * @return		0 on success, POPT_ERROR_NULLARG/POPT_ERROR_BADOPERATION
+ */
+/*@-incondefs@*/
+/*@unused@*/
+int poptSaveInt(/*@null@*/ int * arg, int argInfo, long aLong)
+	/*@modifies *arg @*/
+	/*@requires maxSet(arg) >= 0 /\ maxRead(arg) == 0 @*/;
+/*@=incondefs@*/
+
+/*@=type@*/
+#ifdef  __cplusplus
+}
+#endif
+
+#endif